Buy or Sell Your Barrett Machines

Selling one (1) new unused Falk Gear Coupling Hub. 1050G., Coupling Size1050G, Hub Barrel Outside Diameter (in):10 in Hub Length through Bore (in):6.03 in Hub Material:Steel Hub Straight Bore Diameter [Max] (in):7.375 in Hub Straight Bore Diameter [Min] (in):3.5 in Hub Style:Standard Hub Type:Flex Length:6.03, Item is ...more

ONEIDA AIR SYSTEMS XXK10 Cyclone Dust Collector w/ After-filter and Drum: Cyclone & Fabric Filtration Dust Collection System.: -- 3,800 CFM @ 2.3" SP with 10 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint ...more

Used 62mm Maplan Counter Rotating Conical Twin Screw Extruder, Model DSK 62 4 Barrel Zones, Oil Zone, 7 Die Zones with Eurotherm 808 Temperature Controllers 72:1 Dorstener NSDEN 160 So Gearbox 40 HP Emerson Motor, ABB DCS 800 DC Drive 1 HP Starve Feeder 460/3/60 - 200 AMP Disconnect 40.5" Centerline Vented Barrel - ...more

Capacities:, Swing Over Bed 24”, Swing Over Cross Slide 16”, Swing Over Gap 31”, Length of Gap 15.3, Workpiece Weight Capacity, At Headstock 1320 lbs., Between Centers 4400 lbs., Between Centers w/St Rest 5500 lbs., Headstock:, Spindle Speed 22 – 1500 RPM, Ranges (3), Spindle Bore 4 1/8” ...more

Used 1.0” American Kuhne Extruder, 24:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline 2.5” L x 2.0” W Rectangular Feed Throat Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones Barrel Clamp Includes Screw 5 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 753 AC ...more

Used 3.5" Merritt Davis Model 3.5 Extruder with 1.5" Merritt Pedestal Extruder System Consists Of The Following Pieces: 3.5" Merritt Davis Extruder, 24:1 L/D Ratio, Air-Cooled Barrel, 5 Barrel Zones 13.9:1 Gearbox Ratio, Direct Driven, 75 HP Eurotherm DC Motor(2000/1150 RPM) With Reliance FlexPak DC Drive, 130 RPM ...more

Used 20mm Theysohn Co-rotating Twin Screw Extruder, Model TSK-TT 020/28D, 28:1 L/D Ratio, 3.75 KW Main Motor, 1,750 RPM, 2.79:1 Gearbox Ratio, Water Cooled Barrel, 5 Temperature Control Zones, 4 Barrel, One Die, Amp Meters For Each Zone, Amp Meter, RPM Gauge, Vent Section, Strand Die, Comes With Material Feeder, With ...more

Used 4.5" Welex, Model 4.5 30:1 D, 30 L/D Ratio, 11.7:1 Gearbox Ratio, 350HP 350HP Baldor AC Motor 6 Barrel Zones, 8 Die Zones Rectangular Throat Feed (6.5" x 5.5") 2208 Temperature Controllers Dynisco Pressure Readout ABB ACS880 AC Drive Approx. 30 HP Melt Pump Driven By SEW Gearbox Mixed Solid State & Mercury ...more

Make: Sterling, Model: S-38, Year: 1985, Machine Location: Missouri, Max. Head Tooling 10”, Clamp: 44” Wide Between Tie Bars, 32” High, 42” Max Open, 16” Min., 125-Hp. Extruder Drive Motor, 30-Hp. Hydraulic Clamp Motor, 3.5” Extruder, Cast Aluminum Barrel Heaters, Barber Colman Maco ...more

Used 3.5" Welex Single Screw Extruder, Model 350-30:1-LHV, 30:1 Water Cooled Barrel Welex Gearbox, Type PEDS560, 430hp Capacity, Gearbox Ratio 7.7:1, GB Serial Number: 71092783-4 5 Barrel Zones, Water Cooled, 2hp Water Recirculation Pump with Heat Exchanger 56" Centerline Yasakawa A1000 AC Drive - 460/60/3 - 207Amps ...more

For sale is two (2) new unused TB Woods Quick Detachable Bushing. Part number: SK11516., Bushing Size SK Bore Type Finished w/ Keyway Keyway Size 1/2 x 1/4 in Bore Diameter 1.9375 in Flange Outside Diameter 3.8750 in Flange Thickness 0.5000 in Length Through Bore 1.8750 in Material Cast Iron Torque Capacity 7000 in ...more

, 2014 Finishing Associates B200 Rotary Barrel Finishing Machine, Like New, 6.0 CuFt cap., Rubber Lined - excellent condition, Separation Under the barrel, Vibration feed tray, Electrics: currently set up for 460V/60 cycle, CAPACITY 6 ft³ DIMENSIONS 80" x 45" x 66" WEIGHT 3,800 lbs Approximate (specific ...more

Used Co-Extrusion Sheet Line by Marshall & Williams / Welex. s 1.5" and 2.5" extruders, 7-layer Cloeren co-ex block, 28” flex lip die, and Marshall & Williams sheet extrusion stack. Ideal for acrylic resins and color concentrates., Co-Ex Sheet Extrusion Line Consisting of the Following:, 1.5" Davis ...more

Used 3.5" HPM Extruder, Model 3.5"" Prodex 30.1 30:1 L/D Ratio, Air Cooled Barrel 13.88:1 L/D Ratio, Flender SZNE 250 Gearbox Rated To 325 HP Belt Driven, 1.22:1 Belt Ratio, 9" Drive Belt, 11" Driven Belt 100 HP AC Reliance Motor And Reliance GV3000/SE Inverter Drive Unitized Control Panel, 5 Barrel Zones, 10 Barrel ...more

ONEIDA AIR SYSTEMS XXK050346 Cyclone Dust Collector w/ After-filter Plenum. Cyclone & Cartridge Fabric Filtration Dust Collection System for High Pressure CNC applications (need more static pressure for effective cleaning of cutter heads). -- Performance: 2,120 CFM @ 2" SP with Filter. 5 HP US Made BALDOR, Class ...more

used- buss model mks 30 laboratory ko-kneader extruder, serial# 97-1030 (1997). 30mm diameter x approximate 17" long single screw. throughput rates up to 30kg per hour. 3 zone barrel electrically heated, water cooled. water cooled feed throat with hopper. driven by a 10 hp, 3/60/230/460 volt, 1740 rpm ac motor with ...more

SERIAL #12834, MODEL #H-STF-D3, CAPACITY -.019 TO.010 (ZIRCONIUM), NUMBER OF DIES - 14, NUMBER OF DIE BLOCKS - 15, DIAMETER OF DIE BLOCK - 3-1/2", VARIABLE SPEED - 30 TO 500 FPM, TRAVERSE LEVEL WIND, SELF CONTAINED SPOOL - 6" FLANG X 3" BARREL X 5/8" BORE, FOOT JOG CONTROL, 2 HP/1150-3000 RPM/DC MAIN MOTOR, MG SET: ...more

used coperion werner & pfleiderer zsk 50 mcc twin screw extruder 40mm high-speed compounding system with side feeder, co-rotating, (2) 40 mm diameter side by side screws, 54:1 l/d ratio, 10 total barrel sections, (9) heated barrels, electrically heated water cooled. driven by a 181 kw (242.72hp) - 470 volt dc ...more

Used 1.0” American Kuhne Extruder, 24:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones Barrel Clamp Includes Screw 3 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 700 AC Inverter Drive 30 AMP Main ...more

6" Welex Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, Vented and Plugged, 6 Barrel Zones, 9 Die Zones, Direct Driven To 8.7:1 Koellmann Gear Box, With 500 HP Reliance AC Motor, (200 Screw RPM), Tempco Cool Touch Heater Bands, Vented & Plugged Barrel, Vent Located Approx. 120" From Center Of Feed Throat, 10" L x ...more

CAPACITIES:, SWING OVER BED --------------------- 14", SWING OVER CROSS SLIDE ------------- 8.75", SWING OVER GAP --------------------- 20.75", HEADSTOCK:, SPINDLE SPEEDS (NUMBER) RANGE ------ (12) 50-2,000 RPM, HOLE THRU SPINDLE ------------------ 2", SPINDLE NOSE ----------------------- D1-5 CAMLOCK, HEADSTOCK ...more

Keifel model CA4 40mm 24:1 L/D lowboy extrusion blown film line consisting of:, A) Extruder having an electrically heated, air-cooled barrel. A second complete barrel, screw, and heaters are included to convert the machine to a 30:1 L/D ratio. Gearbox is belt driven by a 30 HP Reliance D/C motor with SCR control. ...more

Gemco, 30 ft³, slant double cone vacuum blender. 316 stainless steel contact parts, with pounds of product per hour – depending on materials and application. Maximum material density of 55 lbs/ft³. Vessel dimensions: 55" diameter x 20" straight side with 14" deep top and 24" deep ...more

2,300,000 BTU/hr Indirect Fired Propane / Natural Gas Line Heater Unused Condition since built (mfg date 2011), Last registered in Saskatchewan Indirect Glycol Watera Bath Heat System Zirco Flame Arrester Burner Model: FAH34/18-24A (removable for easy upgrade). Coil consists of 20 lengths of 3" pipe * 20' for area of ...more

Used 1.25” American Kuhne Extruder, 30:1 L/D Ratio 17.54:1 Koellmann UNEX 1.1 Gearbox, Rated To 15 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 4 Barrel Zones, 4 Die Zones Barrel Clamp Includes Screw 10 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 753 AC Inverter Drive 60 AMP ...more

used- coperion werner & pfleiderer zsk 70 f175e twin screw extruder, co-rotating, (2) 70 mm diameter side by side screws, 23:1 l/d ratio, 6 total barrel sections, (5) heated barrels, electrically heated water cooled. driven by a 108 kw-330-volt ac drive motor via a piv gear box. screw speed maximum 198 rpm. frame ...more

ONEIDA AIR SYSTEMS XXK200300 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System. -- 3,800 CFM @ 12" SP to 6,800 CFM @ 2.7" SP with 20 HP Baldor Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. ...more

Used 40 MM Cissco Machinery Co strand extrusion with 40 MM Cissco Machinery single screw extruder, model ABS 40/28, 28:1 L/D, air cooled barrel, jacketed feed section, driven byt 7.5 kw, 480 volt motor, 55" centerline height, with Wensui vacuum loader, model WS, approximately 112' long stainless steel trough ...more

56" Wide Battenfeld Gloucester Horizontal Sheet Line Line Consists Of The Following Pieces: 3.5" HPM Extruder, 30:1 L/D, 11.67:1 Gearbox Ratio, Lufkin Gearbox, 125 HP DC Motor, 7 Barrel Zones, Water Cooled Barrel, Model 3.5TM III-30, S/N 87089, New In 1987 54" Wide EDI R75 Sheet Die, Includes Extra Die Lips 56" Wide X ...more

4.5" Diamond America Extruder, 32:1 L/D Ratio, Water Cooled Barrel, Vented Plugged, 5 Barrel Zones, 8 Die Zones, Pressure Readout, Amp Load, Melt Temp and Screw RPM, Screw Cooling, Yaskawa A1000 Drive, 200 Hp RPM AC Motor, Direct Driven To a 17.66:1 Ratio, 52" Centerline Height, 7" x 7" Feed Section Has Hopper and ...more

Used 4.5" Davis Standard Single Screw Ram Stuffing Extruder, Model 45IN45-34, New in 2011 34:1 L/D Vented Water Cooled Barrel, 32" x 24" x 12" Water Reservoir, 1hp Water Pump, Heat Exchanger Pneumatic Ram Stuffer, Stuffer 28.5"" x 13.5" 400HP Direct Drive AC Motor, 1775 RPM, Yaskawa AC Drive Pro-Face Touchscreen ...more

Brand/Model: Sulzer Bingham 6x8x10.5 HT-CP : Used Sulzer Bingham 6x8x10.5 HT-CP BB5 barrel case hydraulic turbine Centrifugal pump with the following s: • SS/CS outter barrel case material • 6 stage • 10.5" impellers • 8" 1500# suction flange • 6" 1500# discharge flange • ...more

Kramer Industries Air Cooled Condensing Unit. Model: C3F22KSH, S/N: E07860. Refrigerant: R-22. Chiller barrel diameter: 6 in. Factory test pressure: high side 400 psi; low side 250 psi. Emerson Fan Motor: 1,075 rpm, 208-230 V, 1.3 amps, 60 Hz, 1 phase. Coplematic compressor: Model: ERF1-0311-TAD-800, S/N: 95C72883 ...more

Make: Spectra, Model: Integrated Potting Line, Year: 2000, Machine Location: Upon Request, Equipment Overview, Turnkey potting line combining Spectra XY gantry (Line ID CB1), Sensbey thermal cure conveyor, dual Liquid Control PR4 dispense heads, servo-driven mix/prep station, and crated Binks A/B barrel stir unit. ...more

1/2" Stainless Tig Tube Mill, Cantilever Design Mill, Miller Tig Welder, Tube Diameter: 1/4" - 1/2", Wall Thickness:.020" -.035", Line Speed: 35 FPM, 4000# Mandrel Uncoiler, Forming Mill, 2 Sets Entry Edge Guides, 4 Forming Stands', 3 Side Idler Rolls, 3 Side Idler Roll Cluster, 3 Finn Pass Stands, 2 Side Idler ...more

Midwest / Timesaver 3 Head Belt Grinding| Deburring| and Finishing Machine - 52" width - 1 belt head| 1 flat brush head| 1 round brush head - wet type with dryer - recirculating and filtration system - Built it 2016 now sold by Timesaver| 2016, Used midwest automation / Timeasaver Nautilus - N3 5275 Three Head. This ...more

ONEIDA AIR SYSTEMS XXK070323 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System.: -- 2,900 CFM @ 1.5" SP with 7.5 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint ...more

Capacities, Swing over bed 16”, Swing over cross slide 10”, Swing over gap 21.75”, Length of gap in front of 4 jaw chuck 5”, Headstock, Spindle speeds (no.) range RPM (12) 46-2000, Hole through spindle 2.125”, Spindle nose D1-6 Camlock, Headstock Spindle Reducer #4 MT, Quick Change ...more

Used 4.5" pelletizing line consisting of the following:, - 4.5" Prodex 34/1 L/D vented extruder including strand die, Lufkin "Change Gear" gearbox with 15.03/1 reduction, and an hydraulic screen changer with pump., Extruder is driven by 300 hp AC motor, includes heater control panel, motordrive consisting of Yaskawa ...more

THE SUMMIT 18-3 X 80 GAP BED ENGINE LATHE WITH TAPER IS A ROBUST MACHINE DESIGNED FOR PRECISION AND VERSATILITY IN METALWORKING. IT S A 10-INCH 3-JAW CHUCK AND A 4-WAY TOOLPOST, COMPLEMENTED BY A QUICKCHANGE TOOLPOST WITH HOLDERS FOR EFFICIENT TOOL MANAGEMENT. THE LATHE IS A COOLANT TANK AND PUMP TO MAINTAIN OPTIMAL ...more

2 Staveley Roll Grinders - in very good condtion, We have an operational overhead crane so removal can be done with reasonable cost and efficiency, MACHINE CAPACITIES, Height of machine centres — 42 1/2" (1080 mm.), Maximum admit between centres — 41' 0" (12497 mm.), Maximum load between centres — ...more

Capacities: Swing over bed 33” Swing over cross slide 24 ¾” Swing over gap 41 ¾” Length of gap 18” Work Piece Weights: At The Headstock 1100 Lbs. Between Centers 8,800 Lbs. Between Centers, One Steady Rest 11,000 Lbs., Between Centers, Two Steady Rests 13,200 Lbs. Headstock: ...more

Used 10" Intercole Stewart Bolling / Beringer water ring pelletizing line consisting of: 10" Intercole Stuart Bolling single screw extruder, 10:1 l/d, electrically heated, air cooled barrel, jacketed feed section with hydraulically operated ram feeder with hydraulic pump, cored screw, 24.7:1 gearbox ratio (rebuilt ...more

10" 3 roll sheet stack line, consisting of: 1.25" Davis Standard extruder, model DSPW-125V-H24, 24:1 L/D, electrically heated, water cooled with circulation pump and heat exchanger, on pedestal, driven by 5 hp, 230 volt motor, 15:1 gearbox ratio, (3) zone barrel, with feed hopper, with controls, serial# V9991, built ...more

ONEIDA AIR SYSTEMS FXK041500 Cyclone Dust Collector w/ After-Filter Plenum: Cyclone & Fabric Filtration Dust Collection System. -- 3,800 CFM @ 12" SP to 6,000 CFM @ 2.7" SP with 15 HP Baldor Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded ...more

Summit 20″ x 60″ Precision Engine Lathe, Inventory # 8057, Model: 20 x 60 B, European Quality Machine, Capacities:, Swing Over Bed: 20 1/4″, Distance Between Centers: 60″, Swing Over Cross Slide: 11 7/8″, Workpiece Weights:, @ the Headstock: 400 lbs., Between Chuck and Tailstock: 2,000 ...more

JVT-3807, ONE (1) 3750/4200/4687/5249-FUT KVA RTE SUBSTATION TRANSFORMER<, CLASS OA/FFA, 60 HERTZ, 55/65 DEG. C RISE<, 6.0% IMPEDANCE, ALUMINUM WINDINGS, 3 PHASE<, VACUUM PRESSURE GAUGE, LIQUID LEVEL GAUGE<, TEMPERATURE GAUGE, SAMPLE & DRAIN VALVE<, BUSHING LOC: HV - TOP, LV - SIDE S/N: ...more