Buy or Sell Your Barrett Machines

One Used Barrett Model 151-E Chip Separator, Serial No 151233-E, 18" Chip Wringer, AC Motor and Controls, Located FOB Bridgeport, CT Warehouse.

SERIAL. 230205, MODEL. TTG-10-TL, TYPE. E, CAPACITY. 1000 LBS @ 24", LIFTING HEIGHT. 112", FORK LENGTH. 42", MASK TILTING. YES, BATTERY. 12 VOLT, CHARGE VOLTAGE. 110.

Chip Pan Diameter 30 inches Chip Pan Depth 14 inches Chip Capacity: Cubic Feet 4.5 Chip Capacity: Bushels 3.667" Loads per Hour (Maximum) 15 Hourly Production Rate: Cubic Feet 68 Hourly Production Rate: Bushels 55 Barrels of Chips (55 Gallons) 9 Maximum Allowable Loads in Pounds 425 Running Speed 900 RPM Main Motor 10 ...more

Max. Load 425 Lbs. Pan Diameter 30' Pen Depth 14" Pan Capacity 4.5 Cu. Ft. Max Loads per Hour 15 Electrics AC Motor and Controls ( Wired 220 Volts) Weight 2860 Lbs., Blower.

Used Bonnot single screw extruder, model 2", stainless steel barrel and screw, with approximately 2" diameter X 10" long jacketed barrel with Pin and Grooving barrel, 6" x 4.5" feed throat with stainless steel chopper bar, driven by 3 hp, 230/460 volt motor through gearbox, serial# 2091, built 1970.

Used 6" PTI Extruder - For Rebuild, Needs New Barrel Lufkin Change Gear Gearbox 400 HP GE DC Motor Includes Control Panel DOES NOT HAVE FEED THROAT, SCREW, OR BARREL Sold as incomplete machine. Sold AS-IS.

Stainless Steel Sausage Stuffer, barrel measures 6" diameter X 46" long with 4" diameter discharge. Includes hopper measuring 49" diameter X 36" deep. Complete with start/stop controls. Mounted on stainless steel frame with casters. Previously used in food (meat) operation., Measurements: 6" diameter X 46" long with ...more

used- 90mm krauss maffei model kmd90 counter-rotating twin screw extruder, 20:1 l/d. has electrically heated oil cooled barrel. driven by 40hp dc motor with scr control. includes temperature control panel.

Barrell Length6" (3) Different Hole Diameters Barrell Opening15" Sifter Hole Diameters(3).175" -.245" -.355" Flight Distance12" Flight Height2 1/2" Motor1/2 HP, Variable Speed, FMC Controller.

Used 3" Moyno progressive cavity pump, Frame type 1804L SSO, stainless steel construction, approximately 3" diameter x 60" long barrel, on base with 15 hp, 230/460 volt variable speed motor, serial# AS38222.

Stuffer, Meat, stainless steel, SIMO, Mdl SFM 230 VAC, Vacuum. SIMO Industries Type SFM 230 VAC Vacuum Stuffer, all stainless steel contacts. Barrel measures 9" diameter X 60" long leading to 3" discharge. Includes hopper measuring 41" diameter X 36" deep. Includes start/stop controls. Serial number 97-101175. New in ...more

“This tumble belt blaster and Dust Collector appears to be in good condition. We took it to our warehouse for oversight and we cleaned it up a bit to take the photos (yesterday) It was the only tumble blasting unit at a small non-ferrous foundry near Montreal.After the owner passed away, his widow asked us to ...more

Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 25:1 l/d, electrically heated, water cooled barrel, split barrel design, 2 kw dc motor, 500 rpm screw speed, external control panel, 220 volt, serial# NEF980003 701/1, built 1997. Unit is less Screw set.

Used 3.5" Egan Powerflight Extruder, 24/1 L/D Ratio, 75hp DC Motor, 1750 RPM, With Saftronics Drive, Belt Driven, 4 Zones Water Cooled Barrel, 6 Barber Colman AT580 Temperature Controls, Mercury Relays, Rpm and Amp Gauge, Comes with Barrel Clamp, Hopper and Chrome Plated Screw, S/N 6544.

used- gloucester model 35250r2 3.5" diameter single screw extruder. 3.5" diameter screw, 32:1 l/d. has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio of 18.17:1 and is ...more

Used Leistritz 100mm 44/1 L/D Co-Rotating Twin Screw Extruder. Model ZSE100 GL/44D, serial #3092, new 2002. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft torque capability and electrically heated water cooled vented barrel. Includes twin ...more

Used 6" Davis Standard Egan extruder, model 6026-D.R.H, 44:1 l/d, electrically heated, water cooled barrel, jacketed feed section, vented barrel with vacuum pump, 11.478:1 gearbox ratio, rated 816 hp, with installed with 400 hp dc motor, cored screw, control panel, gearbox serial# X4506, Nordson hydraulic slide plate ...more

Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 40:1 l/d, electrically heated, water cooled barrel, split barrel design, 2 kW dc motor, 500 rpm screw speed, with K-Tron main feeder, (2) Brabender auxiliary feeders, (3) Zenith melt pumps, FTS chiller, external ...more

Brand/Model: Byron Jackson 6x8x13-6 P-HDB : Unused API 610 BB5 Barrel pump with SS stainless steel insert, CW rotation, 83% eff, 8" 600# suction, 6" 1500# discharge. On skid with Bearing Lubrication system. The nameplate indicates that this must have been built for a 240 degree boiler feed application. This ...more

2021 UNITED CPC4000FA Deburrer, 4 ft capacity, 4 barrels, 10 HP motor, adjustable turret speed up to 200 RPM. Constructed from 304 stainless steel with 380-480V, 3, 30A UL certified electrical. Ideal for high-volume finishing., Total Capacity: 4 cu. ft., Barrel Dimensions: 1 cu. ft. x 4 Barrels, Barrel Dimensions ...more

Used 58mm Coperion Co rotating Mega Compounder with 11 barrel sections (34/1 L/D) and side feeder, New 3/2002. Has electrically heated water cooled barrel. Direct connected to 500 hp DC motor with SCR controller. Has operator control panel with HMI touchscreen. Downstream includes Gala #7MUP underwater pelletizer ...more

Used 3.5" Readco twin screw continuous processor, model 3 1/2 HVY DU, heavy duty design, stainless steel product contact surfaces, jacketed barrel rated 150 psi at 600 f, cored shafts with rotary units, driven by 50 hp, 460 volt motor, machine currently set up with cantilevered screws with adjustable gap ribbon die ...more

used coperion 58mm mega compounder extrusion system | 500 hp | 5,000 lb/hr | gala underwater pelletizer. 900 rpm screw speed, 34:1 approx. l/d ratio, 10 barrel section additional images flender gearbox directly coupled to 500 hp dc motor & drive hmi touchscreen interface electrically heated, water ...more

Brand/Model: Roper 6338 : Used 2x3 screw pump, capable of 45gpm @ 1270tdh @ 1750rpm to 500 psi outlet 40 psi differential minimum. Applications: Oil Transfer Pump, High Viscosity Pump, Oil & Gas Pipeline Pump, Production Pump, Barge Loading Pump, Loading Arm Pump, Polymer Pump, Midstream Pipeline Pump, Oil ...more

Brand/Model: Byron Jackson 6x8x13-6 P-HDB : Unused API 610 BB5 Barrel pump with SS stainless steel insert, CW rotation, 83% eff, 8" 600# suction, 6" 1500# discharge. On skid with Bearing Lubrication system. The nameplate indicates that this must have been built for a 240 degree boiler feed application. This ...more

Speed-D-Burr MMSM Barrel Finishing Machine Tumbler #7722 #2, Type: Barrel Type, Barrel Size: 20" x 20", Speeds: Variable, Main Motor: 1 HP, 110V, Protective Cover, Media Trays, Timer.

SERIAL. HP 55, MODEL. ST 24 C, BARREL. OCTAGON, DIMENSION. 12" X 24", DOOR OPENING. 10" X 10", MOTOR HORSEPOWER. 1-1/2.

Used Thermo Fisher Scientific (Haake) Lab Compounding System Conical Extruder Rheocord 300P 7.5KW Motor, 2-200 RPM Speed Range Haake Rheomex Type 557-2209 with CTW 100 Twin Screw Extrusion Head 3 Barrel Zones Barrel Diameter 31.8mm-20mm 300mm Barrel Length 200nm Max Torque Rating 416 SS Barrel Hakke Internal Mixer ...more

Used Moyno DCR4 Pump, 5" x 8", Manufacturer: Moyno, Model: DCR4, 5" inlet x 8" outlet, Driven by a 30 ho motor, Includes spare barrel assembly, Moyno DCR4.

Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed.375" Randcastle Microtruder extruder, model RCP-0375,.375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section,.75 hp, 220 volt motor, 15:1 gearbox ratio, control panel with (3) barrel, (1) adaptor, (1) die zones and ...more

Brand/Model: Sulzer Bingham 1.5x3x9CAP : Used Sulzer Bingham 1.5x3x9, API 610, OH2 pump with the following s: • case material • Single stage • impeller • 3" suction flange • 1.5" discharge flange • On skid with 7.5 HP Westinghouse motor • CW Rotation • Weight • ...more

Brand/Model: Sulzer Bingham 3x4x9C MSD : 7 stage rotor assembly, 9" stainless steel impellers, 5 vane, 5 9/32" between vanes,.84" shroud, 2 1/4" shaft Applications: Saltwater Disposal Pump, Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Water Transfer Pump, Steel Mill Descaling ...more

Brand/Model: Flowserve 4HDX14B : Unused Flowserve 4HDX14B, API 610, BB2 pump with the following s: • Carbon steel case material • Single stage • 11.55" impeller • 8" 300# RF suction • 4" 300# RF discharge • rotation • Packaged on skid with 100 HP Reliance motor • ...more

Brand/Model: Ingersoll Rand 8x10x15 DSV : Used Ingersoll Rand 8x10x15 DSV, API 610, BB2 Centrifugal pump with the following s: • SS-321 case material • Single stage • impeller • 10" suction flange • 8" discharge flange • CCW rotation • Weight • Dims Applications: ...more

Used 10" Intercole Stewart Bolling single screw extruder, 10:1 l/d, electrically heated, air cooled barrel, jacketed feed section with hydraulically operated ram feeder with hydraulic pump, cored screw, 24.7:1 gearbox ratio (rebuilt 2020), 300 hp dc motor with SCR controller, Beringer hydraulic slide plate screen ...more

Used 0.375" Randcastle Microtruder extruder, model RCP-0375,.375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section,.75 hp, 230 volt motor, 15:1 gearbox ratio, control panel with (3) barrel, (1) adaptor, (1) die zones and motor vfd controller, serial# J1935, built 2010.

Used Leistritz twin screw extruder, model MIC18PH/GL-35D, 18 mm screws, co-rotating screws, 35:1 l/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.2 kw, 230/400 volt, 2950 rpm motor with VFD controller, (6) barrel sections with (1) jacketed feed, (2) vented and plugged, (4) non vented barrel ...more

Brand/Model: Ingersoll Rand 3x10DA-14 : Used Ingersoll Rand 3x10DA-14, API 610, BB3 centrifugal pump with the following s: • SS-316 case material • 14 stage • 9 1/2" stainless impellers • 6” 600# RF suction flange • 3” 1500# RF discharge flange • CCW Rotation • ...more

Brand/Model: Ingersoll Rand 2 HMTA-10 : Used Ingersoll Rand 2 HMTA, API 610, BB3 pump with the following s: • case material • Multi-stage • impellers • 4” 600# RF suction flange • 3" 900# RF discharge flange • Weight 3,900 lbs • Dims 80"Lx32"Wx24"H ...more

110573, Used Erema Model 1310TVE Plus film, reclaim line., Rated at 700-850kgs/hour on LDPE and LLDPE and 65-750 kgs/hour on HDPE and 6000-750 kgs an hour on PP. Line consists of the following:, a) Vecoplan model RG62 -150-SPK-150 single shaft shredder. Film/Fiber rotor installed. 62” x 79” throat opening. ...more

Girdler Votator, Model FV1S100, scraped surface heat exchanger. 6" x 72" chrome-plated stainless barrel. 7.5 HP gearhead motor and 2" feed pump and drive. Mounted on stand. Serial number 61101., Diameter: 6", Basis: FOB.

Brand/Model: Sulzer Bingham 12x12x17 CVA : Unused steam turbine driven Vertical in-line centrifugal pump, SP. GR.84, temperature - 750 F, driver 85hp, 12" suction and discharge Applications: Saltwater Disposal Pump, Dewatering Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump, Flood Water Control ...more

Brand/Model: Afton 12x28 : Used vertical single stage can pump, 1/8 impeller lift, no strainer, MFG 10-05-05139"Lx32"Wx32"H Applications: Dewatering Pump, Water Well Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump, Mine Dewatering Pump, Quarry Dewatering Pump ...more

Brand/Model: Allis Chalmers F4D1-391 : Used Allis Chalmers F4D1-391 Centrifugal pump with the following s: • SS-316 case material • Single stage • 13" impeller • 3" suction flange • 1.5" discharge flange • CCW rotation • Weight • Dims Applications: Dewatering ...more

Brand/Model: Labour A90 LF LV 6x8x15 : Used A90 LV 6x8x15 pump with the following s: • 316 SS/CF8M material • Single stage • 14.88” impeller • 8" 150# FF suction flange • 6" 150# FF discharge flange • CCW Rotation • Weight • Dims 34.5"Lx22"Wx31"H ...more

Brand/Model: Goulds 3360 : Used Goulds 3360 Centrifugal pump with the following s: • Carbon steel case material • 4 stage • impeller • 8" 300# suction flange • 6" 900# discharge flange • CCW rotation • Weight • Dims 74"Lx34"Wx46"H Applications: ...more

Brand/Model: Byron Jackson 3x6x9E DVMX : Used Byron Jackson 3x6x9E DVMX, API 610, BB3 pump with the following s: • SS-430/40 case material • 12 stage • No impellers • 6" 600# RF suction flange • 3" 900# RF discharge flange • CW Rotation • Weight • Dims ...more