Buy or Sell Your 20 KW Generators
AI-ranked results for 20kw - closest matches first
48" Pangborn, 21 meter thru-feed shot blast machine,wheel blast cabinet,dust collector, 1999
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pangborn
Year: 1999
Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48" width Entry and Exit Roller Conveyor, Dust Collector Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48" width Entry and Exit Roller Conveyor, Dust Collector.
20 KW SWP #GS25, diesel, sound attenuated enclosure, on trailer, 240/208/480 Volts, 250 hours, 2018, on rent, #71068
Generator Source | Brighton, CO
Category: Diesel Generators
Seller: Generator Source
Location: Brighton, CO
Mfr: Swp
Model: GS25
Year: 2018
Used SWP 20kW Diesel generator. This power unit s a Trailer/SAE enclosure and has approximately 1112 hours of use. It provides Three-Phase power at 277/480v and is ready to ship from our Brighton, Colorado facility., Model: 404D22G, Capacity: 60, Amps: 70, Volts: 277/480v, Phase: Three-Phase, Fuel Type: Diesel.
Eaton 93PM-400 Model 250, uninterruptible power supplies system, 250 KW, 480 Volts, single feed, refurbished
Critical Infrastructure Group LLC | Sparks, NV
Category: Uninterruptible Power Supplies (UPS)
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Eaton
Eaton Powerware 93PM- 400 Model 250, 93 PM- 400 Capacity Frame – Includes (6) 50 kW Power Modules – 3 Right Side / 3 Left Side, Rated: 250 kW, Voltage: 480V – 3W, CTO: 9P425D0009A00R2, Configuration: Single Feed, No ESS, No VMMS, Top Air Exhaust, Includes PXGMS Card, Industrial Relay Card and EMP ...more
Jenfab #LJ-Belt-Washer, Pass Thru with Curved exit, 5 stage, Stainless Steel, U-Shaped 17' Exit Conveyor, 460 V., 2013
Benchmark Machine Tools | Miami, OK
Category: Conveyor and Pass Through Parts Washer
Seller: Benchmark Machine Tools
Location: Miami, OK
Mfr: Jenfab
Model: LJ-BELT-WASHER
Year: 2013
Electric Heat 140 Deg. F. Wash and Rinse Temperatures, Heated Air Blow Off, 7" WIde Belt 1x1 Inch Heavy Duty Belt, 12" Part Height, 190 Gallon Wash Tank, 60 GPM SS PUMP, 36 KW Electric Heat, 150 Gallon Rinse Tank, 40 GPM SS PUMP, 36 KW Electric Heat, Sprays From Above, can be modified, Oil Coalscer, OverFlow/ Auto ...more
Elumatec #SBZ-151, Profile Machining Center, 10300 mm X, 1150 mm Y, 715 mm Z, 167 FPM X, 102 FPM Y & Z, 24000 RPM, 20 kW, 2009
Ex-Factory | Charlotte, NC
Category: Window Profile Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Elumatec
Model: SBZ-151
Year: 2009
ELUMATEC SBZ 151 CNC Profile Machining Center - 10.3 M (33.8 ft)5-Axis CNC automatic profile machining center designed for flexible and efficient machining of aluminum and thin-walled steel profiles. All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the ...more
L & L Machinery #GA-100, High Frequency Edge Gluing Press, 50" width x 100" L x 4.5" thick Gluing capacity, 60" width x 160"/109" L Tables, 480 V, 2017
RT Machine | Hughesville, PA
Category: Edge Gluers
Seller: RT Machine
Location: Hughesville, PA
Mfr: L & L
Model: GA-100
Year: 2017
L&L Machinery Model GA-100 High Frequency Edge Gluing Press Gluing Capacity 50" Wide X 100" Long X 4.5" Thick Generator 20KW Infeed Lay-up Table: The loading area is 60" Wide X 160" Long with Pusher Fence Driven by 1HP Motor. When the Load is Completely in the Press the Carriage will Automatically Reverse and Return ...more
JUST ADDED!
54" x 103" Costa #KA-CCCC-1350, 4-head wide abrasive belt sander, calibrating & finishing, 15-66 FPM, 2005
Ex-Factory | Charlotte, NC
Category: Belt Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Costa
Model: KA-CCCC-1350
Year: 2005
COSTA KA CCCC 1350 Calibrating & Finishing Wide Belt Sander. -- 4-Head, 53" (1350 mm) width cap., (4) Contact rolls for calibrating and finish sanding. -- 1st Head: Steel contact roll, 25 KW (33.5) HP motor. -- 2nd Head: Rubber covered contact roll, approx. 80 Duro & 9.8" dia., 21 KW (28 HP) motor. -- 3rd ...more
20 KW Multiquip DCA25, Diesel, 1800 RPM, 480V, 4085 hours, 2018
Empire Power Systems | Phoenix, AZ
Category: Diesel Generators
Seller: Empire Power Systems
Location: Henderson, NV
Mfr: Multiquip
Model: DCA25
Year: 2018
Multiple units available. Used/New
Call/Text Brett Lambeth 702:803:4881, 12V 53AH (X1), 2, 2.8 GALLONS, 2944566410 (X1), 3500 LBS, 41.7 GALLONS, 60 HZ, AUTO START, CONTINUOUS, DIESEL, EPA LABEL, GENERATORS, MAIN: 8982402800 (X1), N/A, NO, PRE: 8982402790 (X1), PRIMARY: PMAF25436 (X1), PRIME, PUMP: 8981731650 ...more
23 KW MPS #MP-NG25, Natural Gas Generator, Sound Attenuated, EPA Certified Stationary Emissions, Qty. 5, 36 HP, Multi Voltage, 0 Hrs., 2024
McKain Power Systems Consulting LLC | Katy, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: McKain Power Systems Consulting LLC
Location: Katy, TX
Mfr: Mps
Model: MP-NG25
Year: 2024
MPS MP-NG25 ARROW GKP3 ENGINE PREMIUM SA ENCLOSURE STAMFORD ALTERNATOR END BI FUEL – CONTROL PANEL 100AMP CB CAM LOCKS AND HARD WIRE LUGS VOLTAGE SELECTOR SWITCH BATTERY DISCONNECT BATTER CHARGER BLOCK HEATER BATTERY CABLES PAINT GREY MUFFLER W/ CATALYST OIL LEVEL REGULATOR OIL LEVEL MAKEUP – TRAILER ...more
30 KW Caterpillar #XQ35, Mobile Generator, Diesel Type, Sound Attenuated, T4F Emissions, Qty. 9, 36 HP, Multi Voltage, 5793-9835 Hrs., 2020
McKain Power Systems Consulting LLC | Katy, TX
Category: Diesel Generators
Seller: McKain Power Systems Consulting LLC
Location: Katy, TX
Mfr: Caterpillar
Model: XQ35
Year: 2020
Caterpillar XQ35 Mobile Generator – 27KW Prime/30KW Standby – 36HP – Cat C2.2 Engine – Multi Voltage – Sound Attenuated Enclosure – 2020 DOM – 9 Units Available – Hours Range from 5793 – 9835, MPS#: MPS1629-1637Price: Call For PricingCapacity: 27KW Prime/30KW ...more
53" x 90" Butfering #SCO-313-QCH Diamond Optimat, 3-head belt sander, 2008
Ex-Factory | Charlotte, NC
Category: Belt Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Butfering
Model: SCO-313-QCH
Year: 2008
BÜTFERING SCO 313 QCH Diamond. 3-Head Wide Belt Sander, 1,350 mm (53") working width. Constant pass-line.Perfectly suitable for veneer & solid wood sanding, lacquer sanding, as well as High Gloss.Head configuration: (1) Cross belt sanding head, (1) Combination head consisting of Contact Roller & Finishing ...more
Featured
250 KW Cummins #QSM11, 12 lead, 350 hours, trailer mounted with fuel tank, 2 available
Sierra Equipment | Hayward, CA
Category: Diesel Generators
Seller: Sierra Equipment
Location: Hayward, CA
Mfr: Cummins
Model: QSM11
Cummins 250 kw trailer mounted mobile generator with weather enclosure, base mounted fuel tank and dual axle trailer, Cummins DQAD 250 KW standby, 250kw, 312amps standby, 220kw prime power, 139-480 amps, 12 wire, with voltage adjustment switch, Cummins QSM-11 diesel power, 12 wire generator, power command controls ...more
Weinig / Waco #Hydromat-5000, heavy duty feed through moulder, 11-head, 11-13/16" x5-1/2" cap., 656 FPM, 2" spindle diameter, 1990
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weinig
Model: HYDROMAT-5000
Year: 1990
WEINIG/WACO HYDROMAT 5000 Super 30B / WACO MAXI. WIDE High Speed Through Feed Moulder;11-Heads (B-T-R-L-R-L-T-B-T-B-B) Working capacity 300 x 140 mm (11-13/16" x 5-1/2"). Feed speed up to 200 m/Min (656 FPM). -- Head sequence: 1. Bottom 22 kW (30 HP),2. Top 22 kW (30 HP),3. Right 18.5 kW (25 HP),4. Left 18.5 kW (25 ...more
230 KW Cummins #DSHAD, diesel generator set, 120/208 Volts, 3-phase, 364 HP @ 1800 RPM, QSL9-G2 NR3 engine, EPA Tier 3, 336 gal fuel tank, 2026, new
Midwest Engines & Generators | Edinburgh, IN
Category: Diesel Generators
Seller: Midwest Engines & Generators
Location: Edinburgh, IN
Mfr: Cummins
Model: DSHAD
Year: 2026
This new 2026 Cummins 230 kW standby diesel generator set, model DSHAD, is a compact, high-performance power solution designed for commercial and industrial backup applications. Powered by a Cummins QSL9-G2 NR3 diesel engine producing 364 HP at 1800 RPM, this unit delivers 230 kW standby / 209 kW prime power at ...more
Sorensen, SGA400/50D-1AAA, DC Analog programmable power supply, 400 Volts, 50/60 Hz
Lenmark Industries | Langley, BC
Category: Power Supplies - Miscellaneous
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Sorensen
Model: SGA400/50D-1AAA
SKU: 134378, Model: SGA400/50E-2AAA, Condition: Used, S/N: 0832A00600, Type: DC, Electrical :, Output Capacity: 400 Volts, Frequency: 50/60 Hz, Dimensions: 12.00 (H) x 12.00 (W) x 38.00 (L) inches, Additional :, Electrical, - Amperage: 50 A DC output, - Voltage Output Range: 0 - 400 VDC, - Output Power: 20 kW DC, - ...more
JUST ADDED!
Enerpat #BM-6320, Press Metal Chips Briquette Machine
Enerpat | Ontario, CA
Category: Pellet Mills and Briquetting Machines
Seller: Enerpat
Location: 3959 E Guasti Rd # C,Ontario,CA 91761,United State, CA
Mfr: Enerpat
Model: BM-6320
Year: 2025
The ideal choice for enhancing production efficiency, achieving eco-friendly recycling, and processing various metal scraps., The BM Series Large Briquetting Press from Enerpat is designed to meet the needs of high-output customers. With a compression force ranging from 315 to 5000 tons and a production capacity of 1 ...more
48" width x 48" H x 24" L Blue M #DCW-326, double door cabinet oven, Stainless Steel interior, 600°F, tested and ready to ship
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Cabinet Type Ovens
Seller: Furnaces, Ovens & Baths, Inc
Location: Clarkston, MI
Mfr: Blue M
Model: DCW-326
Double doors with 2-point cam action latch and silicon rubber gasket for a good door seal. Stainless steel interior with perforated air duct side wall panels. Coiled style heating elements and direct driven circulating fan are above the work area. Heated air is circulated in a horizontal pattern across the chamber. ...more
230 KW Cummins #DFAB, diesel generator set, 277/480 Volts, 226 hours, 380 HP @ 1800 RPM, LTA10-G1 engine, sound attenuated enclosure, 640 gal. sub-base fuel tank, 2002
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DFAB
Year: 2002
Cummins 230 kW standby (210 kW prime) diesel generator set model 230 DFAB, SN-A020327625. Cummins LTA10-G1 engine rated 380 HP at 1800 RPM, SN-35052797. 3/60/277/480V, 12 lead reconnectable to other voltages. 400 Amp main-line circuit breaker. PMG - permanent magnet generator. PowerCommand digital control panel. ...more
230 KW Cummins #DFAB, diesel generator set, 277/480 Volts, 226 hours, 380 HP @ 1800 RPM, LTA10-G1 engine, sound attenuated enclosure, 400 gal. sub-base fuel tank, 2002
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DFAB
Year: 2002
Cummins 230 kW standby (210 kW prime) diesel generator set model 230 DFAB, SN-A020327626. Cummins LTA10-G1 engine rated 380 HP at 1800 RPM, SN-35052229. 3/60/277/480V, 12 lead reconnectable to other voltages. 400 Amp main-line circuit breaker. PMG - permanent magnet generator. PowerCommand 2100 digital control panel. ...more
JUST ADDED!
Midbrook #250, Wash Rinse Blow-Off, 24" diameter x 20' straight side, Rotary Drum Washer, 2021
Benchmark Machine Tools | Miami, OK
Category: Rotary Drum Parts Washer
Seller: Benchmark Machine Tools
Location: Miami, OK
Mfr: Midbrook
Model: 250
Year: 2021
Flow-8' Wash-6' Rinse-6'-Blow-Off 1'-5" Exit, Wash Tank 509 Gallons, 5 HP Stainless Steel Pump 2 Filters, 5 Electric 28 KW Heating Elements Total 140 KW, Heat Temperature 140-160- Deg. F., Rinse Tank 382 Gallons, 5 HP Stainless Steel Pump 2 Filters, 3 Electric 28 KW Heating Elements Total 84 KW, Heat ...more
250 KW Caterpillar #G3408, Natural Gas generator set,open skid mounted, 120/240 Volts, 1164 hours, 1990
Power Generation Enterprises | Canyon Country, CA
Category: Natural Gas Or Dual Fuel Generators
Seller: Power Generation Enterprises
Location: Canyon Country, CA
Mfr: Caterpillar
Model: G3408
Year: 1990
Pre-owned Caterpillar G3408 Natural Gas Generator Set - Rated at 270KW, 338KVA, 60Hz, 120/240V (12 lead), 1800RPM - Includes Engine Driven Radiator, Jacket Water Heater, Control Panel, Engine Gauge Cluster - Open Skid Mounted - 1164 Hours on the Meter.
Stoelting #Omni-Force-212, 3 Stage pass-thru washer, 12" W x 12" Part Height
Benchmark Machine Tools | Miami, OK
Category: Conveyor and Pass Through Parts Washer
Seller: Benchmark Machine Tools
Location: Miami, OK
Mfr: Stoelting
Model: OMNI-FORCE-212
Product Clearance:, Conveyor Belt 12” Wide by 12” Tall Conveyor, Stainless Pumps, Stainless Pipes, Stainless Chip Basket, Spray Nozzles with swivels, Stainless Steel Filter 30” Wash 100 Micron, Stainless Steel Filter 30” Rinse 100 Micron, 7.5 HP Stainless Wash Pump 60 GPM, 7.5 HP Stainless ...more
100 KW Generac #MGG100M, Natural gas generator set, 480 Volts, 150 HP @ 1800 RPM, sound attenuated enclosure, 2014
Diesel-Powered.com | East Earl, PA
Category: Natural Gas Or Dual Fuel Generators
Seller: Diesel-Powered.com
Location: East Earl, PA
Mfr: Generac
Model: MGG100M
Year: 2014
Stock#: IE100-327-GN Fuel: Natural Gas or Propane Year: 2014 Voltage: 480 Volts Hours: 2 Hours Phase: 1/3 Phase Make: Generac Power Systems, Inc. Model: MGG100M Serial: 1407172 Wires: 12 Lead Kilo Watts: 100 kW STDBY/90 kW PRIME/60 kW Continuous Mounted: Trailer Mounted Enclosure: Sound Attenuated Enclosed: Enclosed ...more
JUST ADDED!
Elumatec #SBZ-151, 5-Axis CNC profile machining center, 24000 RPM, 34' bed length, 2016
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Profilers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Elumatec
Model: SBZ-151
Year: 2016
ELUMATEC SBZ 151 5-AXIS CNC PROFILE MACHINING CENTER, New 2016, 5-Axis CNC automatic profile machining center dsigned for flexible and efficent machining of aluminum and thin walled steel profiles. All operatons, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile ...more
20.0 KVA Xtreme Power #E91 Series, uninterruptible power supplies system, 20 KW, 120/208 V.AC, 3 phase
Critical Infrastructure Group LLC | Sparks, NV
Category: Uninterruptible Power Supplies (UPS)
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Xtreme Power
Xtreme Power E91 Series online 20KVA/20KW, 208/120 VAC three-phase UPS with 3 strings of internal batteries for 7 minutes full load runtime., Includes color touch screen display, static switch, and maintenance bypass switch ; up to 12A charge current, 94% efficiency in online mode or 98% efficiency in ECO mode; ...more
Bodor #P3015, 6kw P Series Sheet Fiber Laser Metal Cutting Laser, 6000 watt, NEW
Smith Machinery Co | Ames, IA
Category: CNC Lasers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Bodor
Model: P3015
FIBER LASER CUTTING MACHINE: Laser Power 6kw Freight & Tariff Included Installation & Training Cost Included Transportantion By Sea Loading Container 2*40'HQ Payment Terms 30% down payment, 70% before shipment. Warranty Three years limited warranty for main parts. One year free labor. Optional list: iTrans ...more
60 KW Warren Caterpillar #N60, portable diesel generator set, Perkins engine, 2014
LarMar Industries Inc. | Midland, TX
Category: Diesel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: N60
Year: 2014
Brand: WARREN CATModel: MDL N60Power: 60kwCondition: USEDSerial #: C13-09-07168Ref #: UC2294.
Eldan #1200, high speed, single shaft heavy granulator, 48" rotor, 15 flying & 6 static knives
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Eldan
Model: 1200
Ideal for initial size reduction of tough materials (e-waste, cables, plastics, MSW) before further processing., Eldan Heavy Granulator HG129 (Rotor 1200mm), Type: High-speed, single-shaft heavy granulator, Rotor width: 1,200mm (48″), Motor options: 90kW / 120kW (120hp / 160hp), Capacity: Up to 5,000kg/hr ...more
30 KW Generac #SD30, diesel generator set, 120/240 Volts, 1-phase, 86 hours, 49 HP @ 1800 RPM, John Deere 4024TF281 engine, EPA Tier 3, sound attenuated enclosure, 2021
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Generac
Model: SD30
Year: 2021
Used Generac 30 kW standby (27 kW prime) diesel generator set, model SD30, SN-3007654794. Perkins 404D-22TA engine rated 49 HP at 1800 RPM, SN-GR84695U991954F. 1/60/120/240V, non-reconnectable to other voltages. 150 Amp main-line circuit breaker. Generac digital H control panel. Battery charger. Coolant heater. Sound ...more
Winkworth #ZX500-6, Z-Blade Mixer, 304L Stainless Steel, Vacuum Rated, 500L capacity, Tilt Discharge, refurbished
Aaron Equipment Co | Schaumburg, IL
Category: Double/single Arm Mixers and Blenders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: ZX500-6
used winkworth zx500-6 z-blade mixer/extruder | 500l working | vacuum lid | jacketed | 304 ss | with tool temp units. 500 liter (132gal) working capacity with a 778 liter total capacity (product dependent). 304 stainless steel chamber measures approx. 1,090mm long x 956mm wide x 735mm deep. ...more
Bodor #P3015, 3kw P Series Sheet Fiber Laser Metal Cutting Laser, 2000 watt, NEW
Smith Machinery Co | Ames, IA
Category: CNC Lasers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Bodor
Model: P3015
FIBER LASER CUTTING MACHINE:, Laser Power, 3kw, Freight & Tariff Included, Installation & Training Cost Included, Transportation By Sea, Loading Container 2*40'HQ, Payment Terms 30% down payment, 70% before shipment., Warranty Three years limited warranty for main parts. One year free labor., Optional ...more
900 Amps, Square D, 20 KA, 3 Pole
Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Square D
Model: 20 KA
The Square D 900A 3 Pole 20KA MH900A breaker offers both reliability and safety for your electrical systems. - Robust Protection: With a 20KA breaking capacity, it ensures superior protection against overloads and short circuits.- High Ampere Rating: Its equipped to handle heavy-duty applications with a 900A rating.- ...more
JUST ADDED!
250 KW Multiquip #MQP250IV, Diesel Generator, FPT #F2CE9685A, 277/480 Volts, weatherproof enclosure, 56 hours, 2008
Quantum Technology | Shippensburg, PA
Category: Diesel Generators
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Multiquip
Model: MQP250IV
Year: 2008
2008 Multiquip MQP250IV Generator Set 250kw 3 phase; 311-wdg. 200kw 1 phase 312KVA Hours:56 Enclosure:Weather-tight Current Voltage: 277\/480 Hertz: 60 Main Breaker:400amp 389Hp. Turbo-Charged, Cursur9 FPT Diesel Governor:ECM Base Fuel Tank:800 Gallon Fuel: Diesel Blockheater: Yes Battery Maintainer:Yes Muffler:Yes ...more
60 KW Caterpillar, portable diesel generator set, Perkins engine, 2013
LarMar Industries Inc. | Midland, TX
Category: Diesel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Year: 2013
Brand: CAT- Warren, Model: N-60 Rental Grade Portable, Power: 60KW, Condition: Used, Serial #: C13-09-07171, Ref #: UC2295.
Stoelting #Omni-Force-212, 12" x12" S/S conveyor belt washer, electric, wash, rinse, heated blow-off
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Detroit, MI
Mfr: Stoelting
Model: OMNI-FORCE-212
Item 7553 Manufacturer: Stoelting Category: Continuous Type: Stainless Steel Belt Washer Heated: Electric Model Number: Omni Force 212 Serial Number: 832 Max. Temperature: 150°F W/R, 250°F Blow-Off Voltage: 460/3/60 Work Area: 12"W x 12"H Opening External Dimensions: 8'W x 9'H x 17'L Controls: ...more
Weinig #Hydromat-H30N, high speed feed through moulder, 9-heads, 11-13/16" x 5-1/2" capacity, 1991
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weinig
Model: HYDROMAT-H30N
Year: 1991
WEINIG Hydromat H30N High Speed Feed Through Moulder; 9-heads.The machine may be older, but is refurbished to a very high standard, is like new! Feed speeds up to 120 m/min. Four-sided planing and profiling of large workpieces at high feed speeds, also for fresh sawn timber.Heavy Duty cast-iron construction - reduces ...more
22 KW Atlas Copco #QAS-25-ID-T4F, Generator, 3 Phase, 20 kW/25 kVA Prime, 28 kVA Standby, 480/277 V
Atlantic Power & Equipment | Atlantic City, NJ
Category: Diesel Generators
Seller: Atlantic Power & Equipment
Location: Atlantic City, NJ
Mfr: Atlas Copco
Model: QAS 25 ID T4F
TheAtlas Copco QAS 25 ID T4F generator is prime power, multi-voltage, sound attenuated, mobile generators. It is powered by an Isuzu Tier 4 Final, liquid-cooled, four-cylinder diesel engine., The units consist of an alternator, diesel engine, cooling system, electrical distribution and control systems - all enclosed ...more
250 KW, Francis turbine, includes gate case, wicket gates & shift ring (2 available)
Mayo Hydropower | Stoneville, NC
Category: Hydro-electric Generators
Seller: Mayo Hydropower
Location: Mayodan, NC
Mfr: Francis
Turbine looks like a S Morgan Smith turbines, 2 available, Include gate case, wicket gates and shift ring, Approximately 250 kW at 18 feet head, These turbines are not in operable shape in their current condition, however they are very solid units that could be rebuilt and provide years of service.
JUST ADDED!
Enerpat #AMB-H, Hopper Style Automatic Metal Baler, 100-250 ton press force, 1-10 THP
Enerpat | Ontario, CA
Seller: Enerpat
Location: Ontario, CA
Mfr: Enerpat
Model: AMB-H
The ENERPAT hopper style automatic metal baler quickly compresses light scrap such as aluminum cans, metal turnings, metal chips and other nonferrous pieces into compact, easy to handle bales. Its large hopper allows continuous feeding so production never stops. Throughput ranges from 1 ton per hour to 10 tons per ...more
Miele #PG8527, Glassware Washer, 208 V., 2013
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Miele
Model: PG8527
Year: 2013
Used Miele Glassware Washer, model PG8527, 21 kw, 208 volt, serial# 51/74368225, built 2013.
20 KW Cummins #RS20A, Natural gas & propane generator, continuous, 120/240 Volts, new
Lenmark Industries | Langley, BC
Category: Natural Gas Or Dual Fuel Generators
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Cummins
Model: RS20A
SKU: 132092, Model: RS20A, Condition: New, Electrical :, Voltage: 120/240 volts, Phase: Single-phase, Fuel Type: Natural Gas, Rating: Continuous, Dimensions: 328.00 (H) x 432.00 (W) x 409.00 (L) inches, Additional :, Alternator: Brush, Auto Voltage Regulation: Yes, Rated Watts: 20,000 Watts, Fuel Type: LP/Natural Gas ...more
Eisai #AIM-1088W, Inspection Line, 32 rotary station, reject table, 1993
Federal Equipment Company | Cleveland, OH
Category: Inspection Equipment
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: AIM-1088W
Year: 1993
Used line, consisting of:-Eisai Inspection Machine, Type AIM 1088W, rotary 32 station, with reject circular accumulation table, serial# D556, built 1993.-(2) Ineva Liftronic Universale articulated lifter, model 2ALTF, 20 kg capacity, with handlebar controls at lift point, column mounted, with column, serial#s 8196F ...more
200 KW Caterpillar #CAT GAS 200KW, Gas Generator Set, 321 RPM, 329 HP
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: CAT
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: Non failedKW: 200 KWRPM: 1800Serial No: 4FD02458Reference: UC1895.
230 KW Generac #SD0230, diesel generator set, 277/480 Volts, sound attenuated enclosure, 259 HP @ 1800 RPM, Iveco FPT 8.7L engine, EPA Tier 3, 531 hours, 2013
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Generac
Model: SD0230
Year: 2013
Used Generac 230 kW standby (207 kW prime) diesel generator set, model SD0230, SN-7872791. Iveco/FPT model F2CE9685A-E002 8.7L, engine rated 359HP at 1800 RPM, SN-029729, EPA Tier 3 emissions. 3/60/120/208V, 12 lead reconnectable to other voltages. 400 Amp and (2) 200 Amp main-line circuit breakers. PMG - permanent ...more
200 KW Caterpillar #G3406, Natural gas generator set, 1800 RPM, SR4
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: -Good CoreKW: 200 KWRPM: 1800Serial No: 4FD01154Reference: CM105.
50 KW Pillar Industries #CE-500, induction hardener & power supply
Yoder Brothers Machinery | Toledo, OH
Category: Solid State Power Supply
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Pillar
SERIAL. 3727, MODEL. CE-500, POWER CAPACITY. 50 KW, FREQUENCY. 450 KHZ.
Shinko 200 KW Induction Motors (2 available)
A M King Industries | Oroville, CA
Category: Squirrel Cage AC Electric Motor
Seller: A M King Industries
Location: Oroville, CA
Mfr: Shinko
2 Units - SHINKO 200 kW (272 HP) Induction Motors.
50 KW Cummins #Onan, Diesel Generator Set, 4400 Hours, 1800 RPM, 480 Volts
LarMar Industries Inc. | Midland, TX
Category: Diesel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Cummins
Model: ONAN
Brand: Cummins/ OnanModel: QSBS-G3NR3Power: 50KWCondition: Used 4400 Total HoursSerial #:73047165Ref #:UC2297.
Elumatec #SBZ-151, Profile Machining Center, 7300 mm X, 1150 mm Y, 715 mm Z, 66 MPM X, 40 MPM Y & Z, 400 mm blade diameter, 24000 RPM, 2017
Ex-Factory | Charlotte, NC
Category: Window Profile Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Elumatec
Model: SBZ-151
Year: 2017
ELUMATEC SBZ 151 CNC Profile Machining Center - 7.2 M5-Axis CNC automatic profile machining center designed for flexible and efficient machining of aluminium and thin-walled steel profiles. All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is ...more
250 KW Caterpillar #3306, complete unit on diesel tank, 480 Volts, 2002
Louisiana Maintenance Services | Folsom, LA
Category: Diesel Generators
Seller: Louisiana Maintenance Services
Location: Folsom, LA
Mfr: Caterpillar
Model: 3306
Year: 2002
This unit is low hour (680) 3306 250 kw.
320 KW Multiquip #DCA400SSI4F, diesel, sound attenuated enclosure, on trailer, multi-tap, 3653 hours, 2018, #88865
Generator Source | Brighton, CO
Category: Diesel Generators
Seller: Generator Source
Location: Brighton, CO
Mfr: Multiquip
Model: DCA400SSI4F
Year: 2018
and is currently located in Brighton, Colorado., Unit #088865 has been carefully updated to meet our quality standards and has passed our thorough 31 Point Quality Assurance Certification., Model: BQ-6WG1X, Capacity: 320kW, Amps: 962, Fuel Type: Diesel.
Werner & Pfleiderer #UK2000AEL, Sigma Mixer/Extruder, 316 Stainless Steel, 793 gallon, double jacketed, 30 KW blades
Aaron Equipment Co | Schaumburg, IL
Category: Sigma Mixers and Blenders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used- werner & pfleiderer mixer/extruder, type uk2000ael. 316 stainless steel construction. total capacity 793 gallon (3000 liter); working capacity 530 gallon (2000 liter). bowl 56.6" x 65.5" x 54.6" deep (1450 mm x 1680 mm x 1400 mm deep). sigma style mixing blades, 7.8" (200 mm) diameter shafts. double ...more
230 KW Cummins #DFAB, diesel generator set, 277/480 Volts, 246 hours, 380 HP @ 1800 RPM, LTA10-G1 engine, weatherproof enclosure, 400 gal. sub-base fuel tank, 1998
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DFAB
Year: 1998
Cummins 230 kW standby (210 kW prime) diesel generator set model 230 DFAB, SN-B980700126. Cummins LTA10-G1 engine rated 380 HP at 1800 RPM, SN-34901455. 3/60/277/480V, 12 lead reconnectable to other voltages. 400 Amp main-line circuit breaker. PMG - permanent magnet generator. PowerCommand 2.3 digital control panel. ...more
24 KW Siemens #1PH7133-2QG22-0803, 2650 RPM Servo Motor 42 amps
Brooks Motor & Electric Inc | Cave City, KY
Category: AC Servo Motors
Seller: Brooks Motor & Electric Inc
Location: Cave City, KY
Mfr: Siemens
Frame: 1PH7133-2QG22-0803
Siemens 1PH7133-2QG22-0803 24 kW 2650rpm Servo Motor 42 AmpsUsed---Selling as Pictured----8/24/RVCC 155634---SS283 S2-4-2-2-B ---225.00.
JUST ADDED!
MV Manufacturing Group, 600 amp motor control cen, 575 Volt, 800 amp horizontal & vertical bus, IP42 Enclosure, 2016, (3 available)
Lenmark Industries | Langley, BC
Category: Motor Control Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Mv Manufacturing Group
Model: 600 AMP MOTOR CONTROL CEN
Year: 2016
SKU: 137966, Year: 2016, Condition: Used, Additional :, Original Designation: MCC-A Primary Crushing area, Bus Voltage: 575 V, Short Circuit Rating: 25 kA rms Sym, Board Rated: 600 A, Horizontal Busbar Rated: 800 A, Vertical Busbar Rated: 800 A, Form: 4A, Enclosure: IP42 custom built, Main Equipment Summary, Motor ...more
72" Square D Scrap Handling Magnet, 72", included 25kW Baldor Genset
Alan Ross Machinery Corp | Zion, IL
Category: Lifting Magnets
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Included 25kW Baldor Genset, x, Deep Wound.
Mazak #Integrex-e410HS, CNC lathe, Mazatrol Matrix Control, 2002
Liberty Machine Works | Preston, ID
Category: CNC Lathes and Turning Centers
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Mazak
Model: INTEGREX-E-410HS
Year: 2002
Removed from power due to routine updates. In great working condition was removed!, Located at our warehouse in Preston, Idaho, We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various sources such as ...more
JUST ADDED!
20 KW Cummins/Onan #SD20000, Diesel Commercial Mobile Generator, 3P circuit breaker, 1800 RPM, 120/240 Volt, 1PH
Buckeye Power Systems | Cordova, TN
Category: Diesel Generators
Seller: Buckeye Power Systems
Location: Cordova, TN
Mfr: Cummins
Model: SD20000
Model: Onan SD20000 - A066T979 I 20HDKDB-01 | 120/240V Single-Phase | Watts - 20000W DIESEL | RPM - 1800 | FAN: Pusher | Circuit Breaker: 3-POLE 100A, IN STOCK - 3-5 DAY LEAD TIME, Cummins Onan SD20000 Standard Diesel: Reliable 20kW Prime Commercial Mobile Power, The Cummins Onan diesel ...more
50 KW Cummins #CN50N6, Natural Gas Generator Set, 1800 RPM, 277/480 Volts, 2024
Critical Infrastructure Group LLC | Sparks, NV
Category: Natural Gas Or Dual Fuel Generators
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Cummins
Model: CN50N6
Year: 2024
Manufacturer Cummins Equipment Type Natural Gas Generator Set Fuel Type Natural Gas Model # CN50N6 Capacity (kW) 50kW Frequency 60 Hz Year Manufactured 2024 Condition Surplus Status In Stock.
Sennerskov #GLP-12651, Hot Press, 5' x 10' Platen Size, 80 kW
RT Machine | Hughesville, PA
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Sennerskov
Model: GLP 12651
Sennerskov Model GLP 12651 Hot Press Platen Size 5' x 10' Hot Water Platens Heated with Electric Elements Totaling 80KW.
Elumatec #SBZ-151, profile machining center, 2010
Ex-Factory | Charlotte, NC
Category: Window Profile Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Elumatec
Model: SBZ-151
Year: 2010
ELUMATEC SBZ 151 CNC Profile Machining Center - 10.3 M5-Axis CNC automatic profile machining center designed for flexible and efficient machining of aluminum and thin-walled steel profiles. All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is ...more
220 Ton, Bystronic #PR200X4100, press brake with CNC Back Gauge, 13.5' OA, 8.46" stroke, 2006
Jordan Craig Machinery Intl L | New City, NY
Category: CNC Press Brakes
Seller: Jordan Craig Machinery Intl L
Location: New City, NY
Mfr: Bystronic
Model: PR200X4100
Year: 2006
Tonnage: 220 US tons, Working Length: 161", Max Stroke: 8.46", Rapid Approach: 449 Inch/Minute, Bending Cycle: 23.6 Inch/Minute, Rapid Return: 354 Inch/Minute, Weight: 35,274 lbs., Electrical Values, Power of Main Motor: 22 kW, Total Connected Load: 30 kW, Operating Voltage: 480 V, Frequency: 60 Hz, Control Voltage: ...more
250 KW Generac, Natural gas generator, 600 Volts.
Surplus Electrical Equipment | Concord, ON
Category: Natural Gas Or Dual Fuel Generators
Seller: Surplus Electrical Equipment
Location: Concord, ON
Mfr: Generac
Year: 2010
2010 Generac Nater gas 250 kw 600 volt 157 hrs load tested.
New Rosemount 56-02-20-38-HT 20-30VDC 20W S/N H19-20449069-001 STOCK 5902
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Rosemount
Model: 56-02-20-38-HT
New Rosemount 56-02-20-38-HT 20-30VDC 20W S/N H19-20449069-001 STOCK 5902.
200 KW Caterpillar #D3406-SITA, Natural gas generator set, 14064 hours, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: D3406-SITA
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 14024KW: 200 KWRPM: 1800Serial No: 4FD01130Reference: CM106.
50 KW Generac, Diesel Generator Set, 120/240 Volts, sound attenuated enclosure, 2013
Critical Infrastructure Group LLC | Sparks, NV
Category: Diesel Generators
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Generac
Year: 2013
Manufacturer Generac Equipment Type Diesel Generator Model # 15085240100 Serial Number 7857724 Capacity (kW) 50kW Phase 1 Frequency 60 Hz Enclosure Sound Year Manufactured 2013 Condition Used.
230 KW Cummins #DSHAD, diesel generator set, 120/208 Volts, 3-phase, 124 hours, 1800 RPM, QSL9-G2 diesel engine, EPA Tier 3, sound attenuated enclosure, 300 gal subbase diesel fuel tank, 2011
Midwest Engines & Generators | Edinburgh, IN
Category: Diesel Generators
Seller: Midwest Engines & Generators
Location: Edinburgh, IN
Mfr: Cummins
Model: DSHAD-7750206
Year: 2011
2011 Cummins DSHAD-7750206 S#H110238336 Diesel Generator Set, 230kW standby, 210kW prime, 120/208V (reconnectable for 277/480V) 3ph, 60HZ, 1800rpm, 124 original hours, Cummins PowerCommand digital control panel, Qty (2) 800A breakers, Electric start, 120VAC battery charger, 24VDC battery set, Cummins QSL9-G2 diesel ...more
Siemens #1PH7133-2QG22-0BD3, 24 KW, 8000 RPM, Servo Motor, new surplus, 450 Volts
Brooks Motor & Electric Inc | Cave City, KY
Category: DC Servo Motors
Seller: Brooks Motor & Electric Inc
Location: Cave City, KY
Mfr: Siemens
Frame: 1PH7133-2QG22-0BD3
Siemens 1PH7133-2QG22-0BD3 24 KW 450V 8000 RPM Servo Motor New Surplus--Not In Box--2/24/WWSS283-S2-4-1-3-A---CC 149755---240.00#, Return Policy, Returns accepted within 30 days. Items sold as is cannot be returned, unless is in error. Buyer pays return freight., Shipping Policy, We ship almost all items with 1 ...more
Schnell #BW-4.5T=1000, Discharge Table, 2007
National Machinery Exchange | Newark, NJ
Category: Rebar Benders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schnell
Model: BW-4.5T=1000
Year: 2007
SCHNELL MODEL BW-4.5T=1000 DISCHARGE TABLE, MANUFACTURER - SCHNELL, MODEL - BW-4.5T=1000, Kg - 1400, S/N - 093007-178, YEAR - 2007, POWER - 480 V, 60 Hz, 90 Kw.
60 KW #EPG60P, diesel generator, sound attenuated enclosure, new, 2023 (8 available)
Mid-America Engine Inc | Warrior, AL
Category: Diesel Generators
Seller: Mid-America Engine Inc
Location: Warrior, AL
Model: EPG60P
CATEGORY: Generator Set SUB-CATEGORY: Diesel Generator MODEL: EPG60P CONDITION: New ENCLOSURE: Sound attenuated enclosure YEAR: 2023 HOURS: testing KW: 60 KW ITEM ID: 1425.
30 KW Caterpillar #XQ35, portable diesel generator set, 2020
LarMar Industries Inc. | Midland, TX
Category: Diesel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: XQ35
Year: 2020
MANUFACTURER: CaterpillarMODEL: XQ35 CaterpillarENGINE MANUFACTURER: CaterpillarKW: 30 KWCONDITION: UsedYEAR: 2020HOURS: 6263RPM: 1800Serial No: JK800507Reference: UC241435KVA ;2020 CAT XQ35 PORTABLE GEN SET W/ 6263HRS SERIAL NO: JK800507 on Trailer..
New emerson 56-02-22-38-ht s/n h19-20449068-003 20-30vdc 20w stock 5896
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Rosemount
Model: 56-02-22-38-HT
NEW EMERSON 56-02-22-38-HT S/N H19-20449068-003 20-30VDC 20W STOCK 5896.
420 KW Detroit #Series-60-Spectrum, diesel generator set, 9417 hours, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Diesel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Detroit
Model: SERIES-60-SPECTRUM
MANUFACTURER: DETRIOT MODEL: Series 60 Spectrum CONDITION: Used HOURS: 9417 KW: 420 KW RPM: 1800 Serial No: 06R1002842 Reference: UC1998 Detroit SERIES 60 WITH A MAGNAMAX DVR MOD 572 GEN; 385 Prime/ 420KW Standby; new AVR ; Serviced, TESTED, and Painted.
Italmac #Pegaso-9MT-4A, CNC Machining Center 4-Axis, 2006
Aucto | San Francisco, CA
Category: Vertical CNC Machining Centers
Seller: Aucto
Location: Lincoln, ON
Mfr: Italmac
Model: PEGASO-9MT-4A
Year: 2006
THE 2006 ITALMAC PEGASO 9000 4A IS A 4-AXIS COMPUTERIZED NUMERICALLY CONTROLLED (CNC) MACHINING CENTER. IT OPERATES ON 400 VOLTS, 50/60 HERTZ, 10 KILOWATTS, AND 16 AMPS. CNC MACHINING CENTERS TYPICALLY MULTIPLE AXES (X, Y, AND Z) FOR MOVING THE CUTTING TOOL AND WORKPIECE IN DIFFERENT DIRECTIONS. THE MACHINE ...more
200 KW Caterpillar #G3406-SITA, Natural gas generator set, 480 Volts, 11270 hours, 1800 RPM, 2013
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406-SITA
Year: 2013
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedYEAR: 2013HOURS: 11270KW: 200 KWRPM: 1800Serial No: CTS00881Reference: UC1844.
25 KW Olympian #G25UH1, 287 hours, S/N E2198A001, 120/208 Volts, 1999
Stowers Power Systems | Knoxville, TN
Category: Natural Gas Or Dual Fuel Generators
Seller: Stowers Power Systems
Location: Knoxville, TN
Mfr: Olympian
Model: G25UH1
Year: 1999
Price: $4,500 Hours 371 Rating: Good Serial Num: E2198A001 Phone: +1 865 279 9247 Contact: Robbie Brown Location: Knoxville, TN, Equipment-certification-code: NCR, Power-fuel-code: DIESEL, Power-fuel: Diesel, Outputs-frequency: 60, Outputs-rating-type-code: Standby, Outputs-rating-type: Standby, Outputs-rating: 31 ...more
60 KW Caterpillar #D60-4S, diesel generator set, 2006
Critical Infrastructure Group LLC | Sparks, NV
Category: Diesel Generators
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Caterpillar
Model: D60-4S
Year: 2006
Manufacturer Caterpillar Equipment Type Diesel Generator Model # D60-4S Serial Number CAT00C44ENCE00335 Capacity (kW) 60 kW Phase 3 Frequency 60 Hz Year Manufactured 2006 Condition Used.
40 KW Industrial Engineering & Equipment, Syltherm Temperature Control Unit, w/150 psi @ 450°F, 480 V
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Industrial Engineering & Equipment
Used 40 kW Industrial Engineering & Equipment Co temperature control unit. 480 volt, 40kW, Rated M.A.WP 150 psi @ 450F, INDUSTRIAL ENGINEERING EQUIPMENT 4 kW.
200 KW Caterpillar #G3406, Natural gas generator set, 15870 hours, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 15870KW: 200 KWRPM: 1800Serial No: 4FD01680Reference: CM104.
200 KW Caterpillar, Natural gas generator set, 7349 hours, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 7349KW: 200 KWRPM: 1800Serial No: 4FD01289Reference: UC1847.
33 HP RPM Sicme C16SN/CBA/85, 500 VA, 110 VF
Brooks Motor & Electric Inc | Cave City, KY
Category: DC Motors Electrical, 475-900 Volts
Seller: Brooks Motor & Electric Inc
Location: Cave City, KY
Mfr: Sicme
Sicme C16SN/CBA/85 DC Motor 25 kw 500 Armature V 110VUsed--Good Visual Condition---3/24/LB CC 151286---SS283--S2-2-1-4-C---425.00.
Simplex #Neptune-200, Forced Air-Cooled Resistive Load Bank, 200 KW, 208 V., 2015
McKain Power Systems Consulting LLC | Katy, TX
Category: Resistive Load Banks
Seller: McKain Power Systems Consulting LLC
Location: Katy, TX
Mfr: Simplex
Model: NEPTUNE-200
Year: 2015
Simplex Neptune Forced Air-Cooled Resistive Load Bank – MPS1499 – 200KW – 208V – 2015 DOM – Low Hours.
30 KW HiPower #HDS30YT6U, Diesel Generator Set, 120/208 Volts, 3PH, 2023
Critical Infrastructure Group LLC | Sparks, NV
Category: Diesel Generators
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Hipower
Model: HDS30YT6U
Year: 2023
Manufacturer HiPower Equipment Type Diesel Generator Model # HDS30YT6U Serial Number 523100541 Capacity (kW) 50kW Phase 3 Frequency 60 Hz Enclosure Weather Year Manufactured 2023 Condition Surplus.
Fanuc, M-16iB/20, Industrial Robotic Arm, A05B-1216-B202 type, 20 kg payload capacity, 6 axis, 1667 mm reach, 0.08 mm repeatability
JM Industrial LLC | Millwood, WV
Category: Industrial Robots
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Fanuc
Model: M-16IB/20
Used Fanuc M-16iB/20 Industrial Robotic Arm - M Series, For material handling and assembly applications with payload capacity of 20kg, Robot Type: A05B-1216-B202, Robot Axis: 6, Reach: 1,667mm, Repeatability: 0.08mm, Controller is not included.
220 HP KW RPM 2000 Reliance G315K, DC motor, 500 VA
Brooks Motor & Electric Inc | Cave City, KY
Category: DC Motors Electrical, 475-900 Volts
Seller: Brooks Motor & Electric Inc
Location: Cave City, KY
Mfr: Reliance
Reliance G315K 220KW DC Motor 2000RPM 500V Used---Good Visual Condition---6/25/WW BV 164636---SS283-W-1-5-1-A---2,850.00.
200 KW Baldor #10.N2350-2N, Natural gas generator, sound attenuated enclosure, 432 hours, 2012
Generator Source | Brighton, CO
Category: Natural Gas Or Dual Fuel Generators
Seller: Generator Source
Location: Brighton, CO
Mfr: Baldor
Model: 10.N2350-2N
Year: 2012
Used Baldor 200kW Natural Gas generator. This power unit s a Sound Attenuated enclosure and has approximately 432 hours of use. It is ready to ship from our Brighton, Colorado facility., Model: 10.N2350-2N, Capacity: 200kW, Fuel Type: Natural Gas.
200 KW Inductoheat #USII-200-10, Induction Heater, Stock # 0523021
G-2000 | Toledo, OH
Category: Induction Melting Furnace
Seller: G-2000
Location: Toledo, OH
Mfr: Inductoheat
Model: USII-200-10
MAKE.: INDUCTOHEAT, MODEL.: USII-200-10, CONTROL.: PANELVIEW PLUS 600 PLC CONTROL, CAPACITY.: 200 KW, SERIAL.: 0-3732, SHIPPING:, 4,500 LBS., Machine Type.Induction Heaters Manufacturer.INDUCTOHEAT Model.USII-200-10 Year.N/A Condition.Used.
295 HP 2000 RPM Reliance G315K, 480 VA
Brooks Motor & Electric Inc | Cave City, KY
Category: DC Motors Electrical, 475-900 Volts
Seller: Brooks Motor & Electric Inc
Location: Cave City, KY
Mfr: Reliance
Reliance G315K 220 KW DC Motor 500 Volts 480 Rpm 2000 Rpm Used--Good Visual Condition-6/24LBCC 152971---SS283--S2-3-1-F-B---2,800.00.
Featured
EPC Power #50-100118, 250 kW utility scale inverter
Blue Power Systems | Gilroy, CA
Category: Power Inverters
Seller: Blue Power Systems
Location: Gilroy, CA
Mfr: Epc Power
Model: 50-100118
This is an EPC Power inverter with an all-in-one cabinet and a power output of 250 kW. It was used very lightly, only for testing purposes. The cabinet contains an EPC Power PD 250 (Power Drawer). It is being sold as-is.
200 KW Caterpillar #G3406, Natural gas generator set, 240/480 Volts, 3-phase, 18201 hours, 1800 RPM, sound attenuated enclosure
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 18200KW: 200 KWRPM: 1800Serial No: 4FD00181Reference: UC1911.
60 KVA APC #OG-PD60G6FK1, PDU, 3 Wire, 167 Amps, 120/208 V
Quantum Technology | Shippensburg, PA
Category: Power Distribution Units (PDU)
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Apc
Model: OG-PD60G6FK1
Power your essential equipment with the trusted APC 60 KW PDU OG-PD60GFK1(S6LLST4814). This UPS System ensures efficient power distribution and protection for your mission-critical operations.- 60 KW power capacity for heavy-duty performance- Reliable protection against power surges and outages- Ideal for data centers ...more
50 KW Olympian #D50P1, Diesel Generator, 480/277 V, 1 & 3PH, 166.5 Hrs
Quantum Technology | Shippensburg, PA
Category: Diesel Generators
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Olympian
Model: D50P1
50KW Olympian D50P1 480\/277V 1&3PH Diesel 166.5 Hrs. TESTED (SKU: 110086) 30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warranty—if it doesn’t work as described, we’ll make ...more
270 KW Caterpillar #3408, diesel generator, 277/480 Volts
Mid-America Engine Inc | Warrior, AL
Category: Diesel Generators
Seller: Mid-America Engine Inc
Location: Warrior, AL
Mfr: Caterpillar
Model: 3408
PRICE: Call CATEGORY: Generator Set SUB-CATEGORY: Diesel Generator BRAND: Caterpillar MODEL: Cat 3408 CONDITION: Used KW: 270 KW ENGINE MANUFACTURER: Caterpillar ITEM ID: 1493, Additional Info, Engine Model: 3408 Serial No: 6NB##### Alternator: Cat SR4 Voltage: 277/480 RPM: 1800 MAE #: C41131GS01 BATTERIES INCLUDED: ...more
Eaton 93PM-L-60 Model 20, uninterruptible power supplies System with internal batteries, 208 Volts, refurbished
Critical Infrastructure Group LLC | Sparks, NV
Category: Uninterruptible Power Supplies (UPS)
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Eaton
The Eaton 93PM UPS is the perfect three-phase white or gray space solution for modern data centers. The 93PM is compatible with lithium-ion UPS batteries, which are 40 percent smaller than VRLA batteries and have twice the lifespan, saving money on battery replacement costs and extra square footage for battery ...more
60 KW Budzar #10T-2430-GOM-SP, Temperature Control Unit, 460 V
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Budzar
Model: 10T-2430-GOM-SP
Used 60 kw Budzar BTU Temperature Control Unit, Model #10T-2430-GOM-SP, Serial #200108-4911-6, 460V/3/60, BUDZAR 10T-2430-GOM-SP.
60 KW Budzar #10T-2430-GOM-SP, Temperature Control Unit, 460 V
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Budzar
Model: 10T-2430-GOM-SP
Used 60 kw Budzar BTU Temperature Control Unit, Model #10T-2430-GOM-SP, Serial #200108-4911-4, 460V/3/60, BUDZAR 10T-2430-GOM-SP.
200 KW Caterpillar #G3406-SITA, Natural gas generator set
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406-SITA
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 9000KW: 200 KWRPM: 1800Serial No: CTS00423Reference: CM107.
JUST ADDED!
60 KW John Deere #4.5L, generator set, 480 Volts, 3-phase, 2003
Global Power | Nisku, AB
Category: Diesel Generators
Seller: Global Power
Location: Nisku, AB
Mfr: John Deere
Model: 4.5L
Year: 2003
2003 John Deere 4.5L Engine 60kW 480 Volt 3 Phase, Available at Global.Power Systems Nisku, www.globalpower.ca.
Bundy Shaffer #HS6EFS50, Mixer, 10 KW, 3 HP, 460 V.,
HGR24 | Euclid, OH
Category: Continuous Mixers and Blenders
Seller: HGR24
Location: Euclid, OH
Mfr: Bundy Shaffer
Model: HS6EFS50
Inventory No. 0925-167-0016 Manufacturer Bundy Shaffer Model No. HS6EFS-50 Name Mixer Arrival Date 10-07-2025 Dimensions L x W x H (inches) Unavailable Capacity 10 KW Electrical 3/60/460 Weight (lb.) 10310 Category Chemical Processing Condition Used Available Quantity 1 Serial No. 141071 Item 3 Hp Hydraulic Unit ...more
24 kW Conair #TW2, Thermolator, 460 V., Single Zone
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Conair
Model: TW2
Used 24 kW Conair Thermolator, model TW2, 460 volt, single zone with TW-2 microprocessor controller, serial# 181655.
