Buy or Sell Your 1500 Ton Presses
AI-ranked results for 1500ton - closest matches first
150 Ton, Verson #150-OBG, Gap Frame OBI Press, 50" x 30" Bed, 12" Stroke, 22" Shut Height, 30 SPM
Rygate, LLC | Clarkston, MI
Category: Gap Frame Single Crank Press Machines
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Verson
Model: 150-OBG
Model: 150-OBG, Serial #: 27615, Capacity: 150 tons, Stroke 12", Strokes per minute: 30, Adjustment: 6", Bed area: 50" x 30".
JUST ADDED!
100 Ton, Minster #P2H-100-48, straight side double crank press, S/N 30298, 3.9" stroke, 18.8" Shut Height, 3.94 slide adj., 90-250 SPM, STK# 1652M
Stamptech Inc | Southington, CT
Seller: Stamptech Inc
Location: Southington, CT
Mfr: Minster
Model: P2H-100-48
100 Ton Minster SSDC Press, Model P2H-100-48, S/N 30298, 3.94" Stroke, 90-250 SPM, 90-250 SPM, 3.94" Slide Adj, 18.84" SH, STK# 1652M.
JUST ADDED!
100 Ton, Minster #P2-100-42 Piecemaker, Geared Straight Sided Press, S/N 21150, STK# 1646
Stamptech Inc | Southington, CT
Seller: Stamptech Inc
Location: Southington, CT
Mfr: Minster
Model: P2-100-42 PIECEMAKER
100 Ton Minster Geared Straight Sided Press, Model P2-100-42 Piecemaker, S/N 21150, 5" Stroke, 40-80 SPM, 4" Slide Adj, 17" SH, STK# 1646.
150 Ton, H-frame Hydraulic Press, 10" stroke, 27" open, 6.5" Shut Height, 100 psi
Wheeler Machinery Sales | Pomona, CA
Category: Hydraulic Presses
Seller: Wheeler Machinery Sales
Location: Pomona, CA
UNKNOWN 150 Ton H-Frame Hydraulic Press #8050 #2, Capacity: 150 Ton, Length of Stroke: 10", Maximum Opening: 27", Minimum Opening: 6.5", Power: Air Over Hydraulic (100 psi), Air Over Hydraulic System, Adjustable Bed (Manual Adjustment w/ Heavy Pins).
JUST ADDED!
100 Ton, Reis #TUS-160, Hydraulic Mold Spotting & Tryout Press, 61" x 71" bed, 39.4" stroke, 41.3" daylight, 1998
Aucto | San Francisco, CA
Category: Die Tryout and Spotting Presses
Seller: Aucto
Location: Louisville, KY
Mfr: Reis
Model: TUS-160
Year: 1998
THIS REIS MODEL TUS 160 HYDRAULIC MOLD SPOTTING AND TRYOUT PRESS, MANUFACTURED IN 1998, IS A 4-POST DESIGN WITH A CAPACITY OF 100 TONS. THE MACHINE S AN AREA OF BED MEASURING 61" W X 71" L. ITS OPERATIONAL DIMENSIONS INCLUDE A STROKE OF 39.37" AND AN OPENING OF 41.33". THE PRESS IS A 4-POST ...more
100 Ton, Minster #P2-100-48 Piecemaker, straight side double crank press, S/N 23312, 5" stroke, 0-150 SPM, 4" slide adj, 18.5" Shut Height, STK# 1603M
Stamptech Inc | Southington, CT
Seller: Stamptech Inc
Location: Southington, CT
Mfr: Minster
Model: P2-100-48 PIECEMAKER
100 Ton Minster SSDC Press, Model P2-100-48 Piecemaker, S/N 23312, 5" Stroke, 0-150 SPM, 4" Slide Adj, 18.5" SH, STK# 1603M.
JUST ADDED!
100 Ton, Minster #P2-100-48 Piecemaker, straight side double crank press, S/N 27447, STK# 1643M
Stamptech Inc | Southington, CT
Seller: Stamptech Inc
Location: Southington, CT
Mfr: Minster
Model: P2-100-48 PIECEMAKER
100 Ton Minster SSDC Press, Model P2-100-48 Piecemaker, S/N 27447, 3" Stroke, 0-300 SPM, 4" Slide Adj, 21" SH, STK# 1643M.
JUST ADDED!
100 Ton, Bystronic #Xpert-100/205, CNC Press Brake, 6.7' overall, 80" between housing, 12" stroke, 1996
Mid Atlantic Machinery | Harrisburg, PA
Category: CNC Press Brakes
Seller: Mid Atlantic Machinery
Location: Harrisburg, PA
Mfr: Bystronic
Model: XPERT-100/205
Year: 1996
100 TonsHydraulic Press BrakeOverall Length = 80″Between Housing = 80″Stroke = 12″5 AxisCNC Control:, Bystronic CNC Controls, 5 Axis Back Gauges, Hydraulic Tool Clamping, Ergo Arm Support, Optical Guiding System, Ergo Height and Position Adjustable Panel, Ergo Foot Switch, Rear Sliding Electric Door.
100 Ton, Whitney #790-084, flange press, 4-1/4" throat, 1-3/8" stroke, 1-1/4" max hole
SOMINN Machinery Sales | Dodge Center, MN
Category: Flange and Web Punch Machines
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Whitney
Model: 790-084
WHITNEY (USED) 100 TON FLANGE PRESS, 100 TON, 4-1/4" THROAT, 1-3/8" STROKE, 1-1/4" MAX HOLE, 10 HP, 700 464 MODEL POWER UNIT, SERIAL NO. 700-464-18353.
100 Ton, Minster #P2-100-48 High Speed Piecemaker, straight side double crank press, S/N 23255, STK# 1605M
Stamptech Inc | Southington, CT
Seller: Stamptech Inc
Location: Southington, CT
Mfr: Minster
Model: MODEL P2-100-48 HIGH SPEED PIECEMAKER
100 Ton Minster SSDC Press, Model P2-100-48 High Speed Piecemaker, S/N 23255, 5" Stroke, 0-150 SPM, 4" Slide Adj, 18.5" SH, STK# 1605M.
500 Ton, Lien Cheih #Tricon-L-LCM-500, 50" stroke, 80" daylight, 48" x 48" platen, 2001
Tech Machinery | St Clair Shores, MI
Category: Hydraulic Presses
Seller: Tech Machinery
Location: Detroit, MI
Mfr: Lien Cheih
Model: TRICON-L-LCM-500
Year: 2001
500 Ton Lien Cheih Hydraulic Press, New 2001, Floor Standing, 50" Stroke, 80" Daylight, 48" x 48" Platen, 75Ton Ejector, 1000 IPM.
100 Ton, Minster #P2-100-48 Piecemaker, straight side double crank press, 4" stroke, 20" Shut Height, S/N 17057, STK# 1563
Stamptech Inc | Southington, CT
Seller: Stamptech Inc
Location: Southington, CT
Mfr: Minster
Model: P2-100-48 PIECEMAKER
100 Ton Minster SSDC Press, Model P2-100-48 Piecemaker, S/N 17057, 4" Stroke, 80-160 SPM, 4" Slide Adj, 20" SH, STK# 1563.
100 Ton, Minster #P2-100-48 High Speed Piecemaker, straight side double crank press, S/N 16531, STK# 1602M
Stamptech Inc | Southington, CT
Seller: Stamptech Inc
Location: Southington, CT
Mfr: Minster
Model: P2-100-48 PIECEMAKER
100 Ton Minster SSDC Press, Model P2-100-48 High Speed Piecemaker, S/N 16531, 4" Stroke, 80-160 SPM, 4" Slide Adj, 20" SH, STK# 1602M.
150 Ton, TMP, hydraulic rubber press, 6 stroke, 6" DL, 18" x18", electric platen, self contained hydraulic unit
Soberay & Sons Ltd | Cleveland, OH
Category: Molding Compression Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Tmp
Item 3050 - One (1) Used TMP 18" x 18" press, 150 ton, 6" daylight between platens, 6" stroke, (1) electric platen, self contained hydraulic unit, controls.
Kingsland #K210-Q, ironworker, 75-100 ton, 24 HP, 230/460 V.
Allstate Machinery | Cornelius, NC
Category: Ironworkers
Seller: Allstate Machinery
Location: Cornelius, NC
Mfr: Kingsland
Model: K210-Q
New 75 to 100 Ton 2 axis Ironworker with CNC gauge system, 24HP, 230 or 460v 60hz, Applications: copper buss bar, plate, angle.
Yamamoto HE2-500-45WSA, Multi-Opening Plywood Hot Press, 45-opening, 500 Ton, 2.75" daylight, 106" x 53" x 1.57" press platens, 1996
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Yamamoto
Model: HE2-500-45WSA
Year: 1996
Used YAMAMOTO 45-opening, premium quality, Plywood Hot Press. -- 500 Tons Pressure Capacity. -- Daylight is 2.75" (70 mm). -- Press Platens are 106" x 53" x 1.57" (2,700 x 1,350 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with ...more
150 Ton, Minster #P2-150, straight side press, 6" stroke, 28" Shut Height, 54" x40" bed, 45-90 SPM
Tom Hale Equipment Co. Inc | Crossville, TN
Seller: Tom Hale Equipment Co. Inc
Location: Crossville, TN
Mfr: Minster
Model: P2-150
150 Ton Minster Straight Side Press, Model P2-150, 54 X 40 Bed, 6 Inch Stroke, 45 to 90 SPM, 28 Inch Shut Height, 21 Inch Wide Windows, $139,500.00 Loaded Out, Tom Hale Equipment Company, Inc., Best source of Straight Side Stamping Presses, Since 1981, Crossville, Tennessee Tom Hale - President, Phone: 931-250-6181 ...more
150 Ton, Bliss #S2-150-48-30, straight side double crank press, 4" stroke, 20" Shut Height, 8" adj., 48" x30"bed, 35 SPM
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: S2-150-48-30
(1) Used 150 Ton Bliss Model S2-150-48-30 Straight Side Double Crank Press, Capacity: 150 Ton, Stroke: 4", Shut Height: 20", Slide Adjustment: 8", Bed Area: 48"LR x 30"FB, Speed: 35 SPM, Capacity: 150 Ton, Stroke: 4", Shut Height: 20", Slide Adjustment: 8", Bed Area: 48"LR x 30"FB, Speed: 35 SPM.
150 Ton, Tishken #CO-20-4-150, pre-punch & notch press, 2.5 stroke, air clutch
Perfection Global | Elk Grove Village, IL
Category: Cut-off Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Tishken
Model: CO-20-4-150
Tonnage Capacity: 150 TonStroke: 2.5"Bed Area: 50" x 36"Open Height: 14"Post Diameter: 3.5"Motor: 30 HP, AC, Air ClutchAdjustable Locating Holes in DieAdjustable Mounting Base.
JUST ADDED!
150 Ton, Trane, Rotary Chiller, 300 psig, 460 Volt, 1997
Global Equipment International | Chalfont, PA
Category: Chillers
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Trane
Year: 1997
TRANE SERIES R CENTRAVAC ROTARY CHILLER, MODEL RTHB215FMF00LWP000UNN3LF2LFV00U0, SERIAL NUMBER 1197K05882, 150 TON, COMPRESSOR VOLT 460V 60HZ 3 PH, 137"L X 34"W X 65"H, Manufacturer TRANE Model RTHB215FMF00LWP000UNN3LF2LFV00U0 Year 1997 Condition Used Serial Number 1197K05882 Stock Number 110567.
100 Ton, 6-sheave, 7/8" rope, Crosby
MachineCo | Montreal, QC
Category: Cranes Hook Blocks
Seller: MachineCo
Location: Montreal, QC
Mfr: Crosby
“An expanding local company was rebuilding Allis rock crushers.but after investing in a 30 ton 70 ‘ span bridge, 50 ton hoist and this spare 100 ton block, they cancelled the expansion. Knowing they had only purchased good used equipment, we sold the bridge to a dealer. The hoist went to lift dam gates in ...more
2500 Ton, Clearing #S2-2500-144-60, straight side double crank press, 20" stroke, 52" Shut Height, 9-18 SPM, 60" x144" bed, lube system
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Clearing
Model: S2-2500-144-60
Model: S2-2500-144-60, Capacity: 2500 Ton, Stroke: 20", Shut-Height: 52", Adjustment: 12", Spm: 9-18, Bed Size: 144" x 60", Reciprocating Lube System, 5 Cushons, Machine Type.Presses, Straight Side Manufacturer.CLEARING Model.S2-2500-144-60 Year.N/A Condition.Used.
JUST ADDED!
225 Ton, Pacific #J225-12H, Press Brake, 5/16" x 10' max. capacity, backgauge, 1989
Machine Tool Bids | Chicago, IL
Category: Hydraulic Press Brakes
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Pacific
Model: J225-12H
Year: 1989
Pacific J225-12H Press Brake (1989), Tonnage: 225 Ton, Punching capacity: 150 Ton, Max Capacity: 5/16" x 10', Max Ram Die Wt: 0.9 Tons, Backgauge, Recommended Domestic & International Freight Forwarding, Miami Global Lines (MGL), Contact: Brandon, Email: [email protected], Phone/WhatsApp: +1 ...more
1000 Ton, Verson #S4-1000-144-84T, straight side double crank mechanical press, 20" stroke, 60" Shut Height, 14" adj., 144" x84"bed, 13-26 SPM, 1978
Rygate, LLC | Clarkston, MI
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Verson
Model: S4-1000-144-84T
Year: 1978
Model: S4-1000-144-84T, Serial #: 25972, Capacity: 1000 Tons, Stroke: 20", SPM: 13-26, Ram Adjustment: 14", Bolster Size: 144" L-R x 84" F-B.
100 Ton, Canadian General Electric Overhead Handling, pot metal cranes, 54' span, double girder, new unused (4 available)
Lampson Crane | Kennewick, WA
Category: Overhead-Bridge Cranes
Seller: Lampson Crane
Location: Kennewick, WY
Mfr: Canadian General Electric
Cranes were designed and purchased NEW for the Stanwell Magnesium Project. The poject was cancelled and the cranes were never used. All cranes have been stored indoors their entire life. Each crane is 100 ton capacity with two 60 ton remote controled hooks and two additional 30 ton hooks. Photos to follow.
Eriez #42-72-Electropulley, Electromagnetic Drum/Pulley Separator, 5000 gauss max Magnetic Strength, 230 V
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Eriez
Model: 42-72
Year: 2008
High-capacity Eriez electromagnetic drum/pulley separator, used in magnetite preconcentrate. Performs like new. Capable of handling approximately 500 tonnes per hour under typical operating conditions., Key :, Model / Style: 42-72 Electropulley, Style # 200808772, Serial #: 224441-2, Input Voltage: 230 V DC, Current: ...more
JUST ADDED!
150 Ton, Bliss #HP2-150, straight side press, 4" stroke, 13.5" Shut Height, 60" x36" bed
Machinery Marketing International | Chicago, IL
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Bliss
Model: HP2-150
150 Ton. 60 x 36 Bed Size, Used Bliss HP2-150 Straightside Press, this is a 150-ton mechanical stamping press machine used for heavy-duty metal stamping, blanking, and forming. Built for high-volume production, it s rigid straight-side construction, precise performance, and wide bed options, making it ideal for ...more
150 Ton, Greenerd #4D-150-144x48-20S, hydraulic press, adjustable stroke, adjustable tonnage, 2004
Pearl Equipment Co | Nashville, TN
Category: Hydraulic Presses
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Greenerd
Model: 4D-150-144X48-20S
Year: 2004
Greenerd 150 Ton Hydraulic Press, S/N: 03T6354, Mfg: 2004, Stock No: 87357, Model: 4D-150-144 x 48-20S, Capacity: 150 Tons, Adjustable Stroke, Adjustable Tonnage, Greenerd Control, Motor: 30 HP 480V/3Ph, Overall Dimensions, Approximately: 180" L-R x 78" F-B x 168" H, Weight, Approximately: 83,000 Lbs.
100 Ton, Amada #FBD-1025, Hydraulic Press Brake, 98" bend length, 7.5 KW, Amada NC9-F control
HGR24 | Euclid, OH
Category: Hydraulic Press Brakes
Seller: HGR24
Location: Euclid, OH
Mfr: Amada
Model: FBD-1025
Inventory No. 1125-090-0001 Manufacturer Amada Model No. FBD1025 Name Press Brake Arrival Date 12-08-2025 Dimensions L x W x H (inches) Unavailable Capacity 100 TON X 98" Electrical 3/50/60/200/220 Weight (lb.) 14025 Category Fabrication Condition Used Available Quantity 1 Serial No. 1020091 Item Made In Japan, Nc9-f ...more
100 Ton, Whitney #805-498, hydraulic C-frame punch with hydraulic unit, 1-5/8" stroke, 10 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Whitney
Model: 805-498
MODEL. 805-498, CAPACITY. 100 TON, STROKE. 1-5/8", HOLE CAPACITY. 1.5" THRU 5/8", THROAT. 18.5", HEIGHT IN "C". 20", PENDANT CONTROL. YES, HYDRAULIC UNIT. 10 HORSEPOWER.
100 Ton, Maypress #MKNI-100/6, 60 SPM, 2.4" stroke, 25" x16" bolster, Cieco PLS-Plus, #12100
Yoder Brothers Machinery | Toledo, OH
Category: Double Action Toggle Press Machines
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Model: MKNI-100/6
Dimensions57" X 47" X 76", SERIAL. 3104-776, MODEL. MKNI-100/6, CAPACITY. 100 TON, SPEEDS PER MINUTE. 60, STROKE. 2.4", BOLSTER. 25" X 16".
100 Ton, Minster #PM2-100-48, straight side double crank press, 1.2" stroke, 20" Shut Height, 48" x32" bed area, 0-900 SPM
General Machinery LLC | Detroit, MI
Seller: General Machinery LLC
Location: Detroit, MI
Mfr: Minster
Model: PM2-100-48
Minster 100 Ton Press, Model: PM2-100-48, Capacity: 100 Tons, Bed Area: 48” x 32”, Shut Height: 20”, Adjustment: 2”, Stroke: 1.25”, SPM: 0-900, 36” Coe Servo Feeder, Wintriss Control.
1000 Ton, Verson #S4-1000-120-72T, straight side double crank press, 24" stroke, 60" Shut Height, air clutch & brake, 1986
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Verson
Model: S4-1000-120-72T
Year: 1986
Tonnage 1000, Stroke 24 inches, Shut Height 60 inches, Adjustment 14 inches, Bed Size 120" x 72", Ram Area 120" x 72", SPM 13-26 VSPM, Preliminary, Used Verson Press Model S4-1000-120-72T, Straight Side Double Crank Press, 1000 ton Capacity, 24" Stroke, 60" Shut Height, 14" Adjustment, 120" LR x 72" FB Bed Area, 120" ...more
150 Ton, HPM, hydraulic press, 42" stroke, 62" DL, 20" Shut Height, 30" x 30" bed
Reid Machinery Inc | Lansing, MI
Seller: Reid Machinery Inc
Location: Lansing, MI
Mfr: Hpm
150 Ton HPM Hydraulic Press Asset: L029 Serial Number: 19043-x Capacity: 150 Ton Stroke: 42" 1,066.8mm SPM: 14" 355.6mm Daylight: 62" 1,574.8mm Bed Area: 30" x 30" 762mm x 762mm Slide Area: 30" x 30" 762mm x 762mm Shut Height: 20" 508mm are correct to the best of our knowledge but are subject to correction upon ...more
JUST ADDED!
150 Ton, Bliss #HP2-150, Straight Side Press, 4" Stroke, 60" x 36" Bed Size, 27" x 55" Ram, 13.5" Shut height
Machine Tool Bids | Chicago, IL
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Bliss
Model: HP2-150
Used Bliss HP2-150 Straightside Press, this is a 150-ton mechanical stamping press machine used for heavy-duty metal stamping, blanking, and forming. Built for high-volume production, it s rigid straight-side construction, precise performance, and wide bed options, making it ideal for demanding industrial ...more
100 Ton, Dake #18-255, hydraulic 4-post spotting press, 36" stroke
G-2000 | Toledo, OH
Category: Die Tryout and Spotting Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Dake
Model: 18-255
SERIAL.: 14985, MODLE.: 18-255, TONNAGE.: 100, STROKE.: 36", OPEN HEIGHT.: 60", DAYLIGHT.:, PRESS SPEED.: 17 IPM, PRESS RETURN SPEED.: 38 IPM, Machine Type.Presses, Die Tryout & Spotting Manufacturer.DAKE Model.18-255 Year.N/A Condition.Used.
100 Ton, Pacific #110-10, hydraulic press brake, 10' overall, 96" between housing, 7" stroke, 13" Shut Height, 6" throat, 1979
Machinery Marketing International | Chicago, IL
Category: Hydraulic Press Brakes
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Pacific
Model: 110-10
Year: 1979
Used Pacific 110-10. This pre-owned Hydraulic Press Brake is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Pacific Hydraulic Press Brake we can review machine. To request a quote, inquire about rigging and trucking or to schedule an ...more
Yamamoto HE2-500-30W, Multi-Opening Plywood Hot Press, 30-opening, 500 Ton, 4.7" daylight, 54" x 108" x 1.5" press plates, 1991
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Yamamoto
Model: HE2-500-30W
Year: 1991
Used YAMAMOTO 30-opening, premium quality, Plywood Hot Press. -- 500 Tons pressing capacity. -- Daylight is 4.7"(120mm). -- Press plates are 54" x 108" x 1.5" (1,370 x 2,700 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation ...more
100 Ton, Sysco #ABC-100, die cutting press, rebuilt controller, 1600mm feed belt, 1400 x 1000mm cutting area
Equilibrium Machinery | Waukesha, WI
Category: Die Cutting Press Machines
Seller: Equilibrium Machinery
Location: Waukesha, WI
Mfr: Sysco
Model: ABC-100
Sysco ABC-100 Die Cutting Press, Capacity: 100 ton, Rebuilt controller, Available cutting area: 1400 x 1000mm, Feed belt width: 1600mm, Fed by 480VAC 3PH 60Hz- 30A, and pneumatic supply, Machine is currently in operation.
100 Ton, Feed-Lease / PA/ Beckwood hydraulic press line, uncoiler, straightener, feeder
Galaxie Corporation | Wayne, MI
Category: Forming Presses
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Feed-Lease
Stock #102128A, Condition Used, Tonnage 100 tons Press Line with the Following Components:, Feed Lease Double End Uncoiler, Max Coil Width: 24", Max Coil Weight: 10,000#, Coil ID: 20", Max Coil OD: 60", Hydraulic Expansion, Hydraulic Rotation, PA Industries Straightener, 20" Wide Material, Thickness Range:.010"-.100" ...more
150 Ton, Strippit LVD #PPEB-150BH10, CNC press brake, 10' overall, LVD Cadman Control, crowning, 2004
Blackstone Machinery | Cerritos, CA
Category: CNC Press Brakes
Seller: Blackstone Machinery
Location: Cerritos, CA
Mfr: Strippit
Model: PPEB-150BH10
Year: 2004
Year: 2004, Make: LVD Strippit, Model: PPEB 150BH10, Tonnage: 150 Tons, Overall Length: 10', Weight: 23,000lbs, Dimensions: 12' x 7' x 9'H, LVD Cadman Control, 480v, (Y1, Y2, X, R, Z1, Z2), Crowning, Pedestal, *Personal inspection of all equipment is highly encouraged*, **Sold As-Is, Where-Is with no ...more
2500 & 1250 Ton, Schuler #HZPUI, hydraulic tandem press line, complete (4 of each)
National Machinery Exchange | Newark, NJ
Category: Hydraulic Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schuler
Model: HZPUI
2500 TON SCHULER MODEL HZPUI HYDRAULIC TANDEM PRESS LINE - (4) 1250 TON, SCHULER FOLLOW UP PRESSES, LINE CONSISTS OF THE FOLLOWING:, 2500 TON SCHULER DOUBLE ACTION HYD. PRESS W/ CUSHION, 1600 U.S. TONS SLIDE FORCE, 900 U.S. TONS BLANK HOLDER FORCE, 129.5 U.S. TONS RETRACTION FORCE (SLIDE), 46" MIN SHUT HEIGHT (BLANK ...more
100 Ton, L & J #100-2-48, press, 5" stroke, 18-1/2" Shut Height, 18" windows, air clutch, 15 HP, #70459
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: L & J
Model: 100-2-48
SERIAL. 100104A, MODEL. 100-2-48, CAPACITY. 100 TONS, BOLSTER SIZE. 48" X 27", STROKE. 5", ADJUSTMENT. 4", SHUT HEIGHT. 18-1/2", WINDOWS. 18", AIR CLUTCH. YES, CONTROLS. YES, MOTOR. 15 HORSEPOWER.
150 Ton, 6.69 oz., Toyo #ET-150HR2, vertical injection molding machine, 40mm screw, 2006
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Toyo
Model: ET-150HR2
Year: 2006
, All electric 2006 150 Ton Toyo ET-150HR2 Vertical Injection molding machine:, Rotary table size 65”, Two Station., Horizontal injection, Shot size: 6.69 Oz, Screw size: 40 mm, Platen size: 22" x 22", Machine is in good running conditions and in good shape., Imperial Metric Tonnage 150 T 136.078 t Shot Size 6.7 ...more
150 Ton, Minster #P2-150-54 Piecemaker, 5" stroke, 20" Shut Height, 4" adj, 54" x40", air clutch, 45-90 SPM
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: P2-150-54
Tonnage 150, Stroke 5 inches, Shut Height 20 inches, Adjustment 4 inches, Bed Size 54" LR x 40" FB, Ram Area No attached, SPM 45-90, Highspeed Presses Highspeed Presses, Standard, Minster Model P2-150-54 "Piece-Maker", Straight Side Mechanical Metal Stamping Press, 150 ton Capacity, 5" Stroke, 20" Shut Height, 4" ...more
100 Ton, Amada #Promecam-HFBO-100, CNC press brakes, 10' overall, 1997
Machine Tool Bids | Chicago, IL
Category: CNC Press Brakes
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Amada
Model: PROMECAM-HFBO-100
Year: 1997
MACHINE, Tonnage: 100, Length: 10', Control: Amada, Max Stroke: 7.8" (200 mm), Weight: 15,000 LBS (6750 Kg), 3 Phase:, 230/460 V:, 60 Hz.
150 Ton, Minster #P2-150-54 PieceMaker, hi-speed press, 6" stroke, 23" Shut Height, 45-90 SPM, air clutch
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: P2-150-54
Tonnage 150, Stroke 6 inches, Shut Height 23 inches, Adjustment 4 inches, Bed Size 54" x 40", Ram Area 54" x 40", SPM 45-90, Standard, Minster P2-150 Piece-Maker, Mechanical Metal Stamping Press, 150 ton Capacity, 6" Stroke, 23" Shut Height, 4" Adjustment, 54" LR x 40" FB Bed Area, 54" LR x 40" FB Slide Area, 45-90 ...more
225 Ton, Pacific #J225-12, 12' overall, serial #9345
General Machinery LLC | Detroit, MI
Category: Hydraulic Press Brakes
Seller: General Machinery LLC
Location: Detroit, MI
Mfr: Pacific
Model: J225-12
Pacific Hydraulic Press Brake, Model: J225-12H, Serial# 9345, Maximum tonnage: 225 Tons, Length overall: 144”, Max Capacity: 5/16” x 10’, Punching Capacity: 150 tons, Max Ram Die Weight”.9 Tons.
150 Ton, Minster #P2-150-54 PieceMaker, high speed mechanical press, 6" stroke, 23" Shut Height, 1980
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: P2-150-54
Year: 1980
Tonnage 150, Stroke 6 inches, Shut Height 23 inches, Adjustment 4 inches, Bed Size 54" x 40", Ram Area 54" x 40", SPM 45-90, Standard, Used Minster Press Model# P2-150-54 PieceMaker, Straight Side High Speed Minster Press, 150 ton Capacity, 6" Stroke, 24" Shut Height, 4" Adjustment, 54" LR x 40" FB Bed Area, 54" LR x ...more
50 Ton, Clearing #H-500-72-48, Hydraulic Press, 48" Stroke, 72" x 48" Bed
G-2000 | Toledo, OH
Category: Hydraulic Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Clearing
Model: H-500-72-48
MODEL.: H-500-72-48, TONNAGE.: 500, STROKE.: 48", DAYLIGHT.: 60", CLOSED HEIGHT.: 12", BED SIZE.: 72" L-R X 48" F-B, RAM SIZE.: 72" L-R X 48" F-B, T SLOTTED RAM.: YES, FLOOR STANDING.: YES, Machine Type.Presses, Hydraulic Manufacturer.CLEARING Model.H-500-72-48 Year.N/A Condition.Used.
100 Ton, Niagara #SA2-100-48-36, straight side double crank press, 4" stroke, 12" Shut Height, 3.5" adj., 48" x36" bed, 40-80 SPM, 20" window
Presses for Industry | Detroit, MI
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Niagara
Model: SA2-100-48-36
Preliminary, Niagara Straight Side 2 point Press, Model: SA2-100-48-36, 100 Ton Capacity, 4" Stroke, 12" Shut Height (SDAU) To Top of Bolster, 3-1/2 Slide Adjustment, 48" LR x 36" FB Bed Area, 20" W Windows, 40-80 SPM Vari, Press Operator Controls,Inch/single/continous, Wintriss DiPro 1500 Die Protection model ...more
500 Ton, 80 oz., Van Dorn #500HT80, plastic injection molding machine, 33" x32"tie bar, 40" DL, Pathfinder 3000, 1997
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 500HT80
Year: 1997
(1) Used 500 Ton Van Dorn Model 500HT80 Plastic Injection Molding Machine, Capacity: 500 Ton, Shot Size: 80 oz, Platen Size: 50"x53", Tie Bar Spacing: 33"x32", Daylight Opening: 40", Pathfinder 3000, Capacity: 500 Ton, Shot Size: 80 oz, Platen Size: 50"x53", Tie Bar Spacing: 33"x32", Daylight Opening: 40", Pathfinder ...more
100 Ton, Rousselle #10SS100, 30" x 100" bed, 4" stroke, 50 SPM, air clutch
Planet Machinery Co | Grand Haven, MI
Seller: Planet Machinery Co
Location: Grand Haven, MI
Mfr: Rousselle
Model: 10SS100
Verson #S4-500-186-108T, Blanking Line, 12" stroke, 75" Shut Height, 20" adj, 500 ton, 10-50 SPM, 186" x108" bed
VX Machinery | Sylvania, OH
Category: Blanking Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Verson
-Tonnage: 500 tons, -Bed Size: 186'' x 108'', -AFCO Feedline: 76’’ x 75,000 lb, -AFCO Washer: 76’’ Wide, -ECI Oiler: 76’’ Wide, Press, -S4-500-186-108T, -Stroke: 12’’, -Shut Height: 75’’, -Adjustment: 20’’, -SPM: 10-50, -AFCO 2 ...more
1000 Ton, Bliss #HS1000-H-48-48, Hydro-Dynamic forging cell w/induction heater & tooling, 24" stroke, 16" shut height, 40" daylight, 48" x 48" bed size, 15 tons
Mauldin Machine Inc | Jacksonville, AR
Seller: Mauldin Machine Inc
Location: Jacksonville, AR
Mfr: Bliss
Model: HS1000-H-48-48
TWO PREOWNED BLISS HYDRO-DYNAMIC 1,000 TON HYDRAULIC FORGING PRESS CELLS MODEL HS1000-H-48-48, S/N 30323, Capacity @ 4500 PSI…………………………………….………….…….1,000 Tons, Pull Back ...more
Whitney Three Press Beam Line, 100 ton capacity, 18" throat, 10' long conveyor
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Beam/Drill Lines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Whitney
100 Ton Capacity Beam Line with Updated Automation Control, Computer Pentium MMX 233 MHZ, Manual Control, Hydraulic Power Unit, Length Measuring Probe Drive, Top Flange Unit Upper and Lower Punches, Input and Output Relay, Web Unit: 100 Ton Capacity, Throat: 18” Deep, Infeed Conveyor: 10’ Long, Outfeed ...more
150 Ton, Tishken #CO-20-4-150, pre-punch & notch press, 2.5 stroke, air clutch, adj. mounting base
D & H Machinery Inc | Toledo, OH
Category: Cut-off Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Tishken
Model: CO-20-4-150
Tishken Cut-A-Matic Press, -Capacity: 150 Ton, -Model: CO-20-4, -4 Post Pre Punch and Notch Press, -Adjustable locating holes in the die for Punches and Notches, -Stroke: 2.5", -Bed Area: 50" x 36", -Open Height: 14", -Post Diameter: 3.5", -30 HP AC Motor, -Air Clutch, -Adjustable Mounting Base, -In Storage: Toledo, OH.
150 Ton, Lvd #PPEB-150-10, turbo hydraulic press brake, 10' overall, 100" between housing, 2007
iGAM | Detroit, MI
Category: Hydraulic Press Brakes
Seller: iGAM
Location: Detroit, MI
Mfr: Lvd
Model: PPEB-150-10
Year: 2007
2007 STRIPPIT LVD Turbo Hydraulic Press Brake, Model PPEB-150-10, 150-ton capacity. Ideal for precision bending tasks. Efficient choice for your sheet metal fabrication needs. Currently not under power., Pricing includes a $2,000 rigging fee., Location: Flint, MI, Spec Sheet, 2007 STRIPPIT PPEB-150-10, Tonnage. 150 T ...more
150 Ton, Clearing #150-p-701, Obi Press, air clutch, 6" stroke, 21.5" shut height, 5" adjustment, 33" x 50" bolster
Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Clearing
Model: 150-P-701
Year: 1975
Make: Clearing, Model: 150-P-701, Year: 1975, Machine Location: Ohio, Tonnage: 150, Stroke: 6”, Shut Height: 21.5”, Adjustment: 5”, Strokes Per Minute: 35, Bolster Size: 33” x 50”, Air Clutch, T-Slotted Ram.
100 Ton, Accurpress #710012, hydraulic press brake, 12' overall, 126" between housing, 8" stroke, 10" throat, 1990
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Accurpress
Model: 710012
Year: 1990
100 Ton X 12’ Hydraulic Press Brake with Manual Back Stop, Operator Stand and Foot Switch, Capacity: 100 Tons, Overall Length of Bed & Ram: 144”, Distance Between Housings: 126”, Stroke: 8”, Open Height: 14”, Throat Depth: 10”, INCLUDES: Manual Back Stop, Operator Stand and Foot ...more
Bendmak #DPB-P 150X3000, 150 Ton Dishing Press, Digital Display, 1 Set of Dies, 2900 psi, 63 HP, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Dishing Press Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: DPB-P
150 Ton Dishing Press with Bendmak Digital Display, 1 Set of Dies, Die Holderon Main Piston, Dual Manometer and Ladder Cage., Piston Working Stroke: 21”, Max Working Pressure: 2900 PSI, Nominal Force: 150 Tons, Total Power: 63 HP, Uprights Distance: 121”, INCLUDES: Bendmak Digital Display, 1 Set of Dies ...more
100 Ton, Minster #P2-100-48 Piece-maker, 3" stroke, 20" Shut Height, 4" adj, 48" LR x 31" front back, 200 SPM
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: P2-100-48
Tonnage 100, Stroke 3 inches, Shut Height 23.75 inches, Adjustment 4.75 inches, Bed Size 48" LR x 31" FB, Ram Area No attached, SPM 0 - 200, Highspeed Presses Highspeed Presses, Standard, 100 ton Capacity, 3" Stroke, 23.75" Shut Height, 18.75" Die Height, 4.75" Adjustment, 48" LR x 31" FB Bed Area, 0-200 VSPM ...more
150 Ton, Heim #S150-42X60, straight side double crank press, 3" stroke, 14" Shut Height, 45 SPM, #69021
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Heim
Model: S150-42X60
SERIAL. 1715, MODEL. S150-42X60, CAPACITY. 150 TON, LENGTH OF BED. 60", WIDTH OF BED. 42", STROKE. 3", SHUT HEIGHT. 14", STROKES PER MINUTE. 45, WINDOW. 22" WIDE.
JUST ADDED!
1000 Ton, Komatsu #L4-S1000, 144" x 84" Bed, 33" stroke, 54" Shut Height, 11-22 SPM, Rolling bolster, (8 available)
Ball Bros Machinery Ltd | Cambridge, ON
Seller: Ball Bros Machinery Ltd
Location: Cambridge, ON
Mfr: Komatsu
Model: L4-S1000 144X84
Model L4-S1000 144x84, Capacity – 1000 Tons, Bed: 144” x 84”, Stroke: 33”, Strokes per minute: 11-22 (Variable), Shut height: 54”, Adjustment: 18”, Rolling bolsters (through side columns).
100 Ton, Minster #P2-100-48 Piece-Maker, straight side double crank press, 3" stroke, 17.5" Shut Height, 120-240 SPM
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: P2-100-48
Tonnage 100, Stroke 3 inches, Shut Height 17.5 inches, Adjustment 4 inches, Bed Size 48" LR x 31" FB, Ram Area No attached, SPM 120-240, NEW INVENTORY!, Complete to Follow when press arrives in the warehouse!.
15 Ton, Budzar, chiller, R22 refrigerant, water cooled
Machinery & Equipment Co | Brisbane, CA
Category: Chillers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Budzar
Budzar Liquid Chiller, 15.4 Tons Capacity - a Copeland compressor, designed to use R22 refrigerant. Built for water cooling of compressor and condenser systems., Tonnage: 15.4, Basis: FOB.
150 Ton, Minster #P2-150-54 Piece-Maker, straight side double crank high speed mechanical stamping press, 6" stroke, 23" Shut Height, air clutch, refurbished
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: P2-150-54
Tonnage 150, Stroke 6 inches, Shut Height 23 inches, Adjustment 4 inches, Bed Size 54" x 40", Ram Area 54" x 23", SPM 45-90 VSPM, Standard Minster P2-150 Piece-Maker, Serial Number 23153 Mechanical Metal Stamping Press 150 ton Capacity 6" Stroke 23" Shut Height 4" Adjustment 54" LR x 40" FB Bed Area 54" LR x 23" FB ...more
150 Ton, York #YLAA0155, Air Cooled Chiller, 460 V.
LEL Critical Equipment | Spartanburg, SC
Category: Chillers
Seller: LEL Critical Equipment
Location: Spartanburg, SC
Mfr: York
Model: YLAA0155
150 Ton York Air Cooled Chiller - YLAA0155 The York YLAA0155 Air-Cooled Chiller is a high-efficiency, 150-ton cooling solution designed to deliver reliable and cost-effective temperature control for large commercial and industrial applications. Perfect for office buildings, warehouses, retail spaces, and light ...more
JUST ADDED!
2500 Ton, Clearing #TS2-2500-144x60, straight side double crank press, 20" stroke, 52" Shut Height, 12" adj., 144" x60" bed, 9-18 SPM
Toledo Press Industries | Detroit, MI
Seller: Toledo Press Industries
Location: Detroit, MI
Mfr: Clearing
Model: TS2-2500-144X60
Model TS2-2500-144x60 Tonnage 2500 tons Bed Size 144" x 60", Bed Size: 144" x 60" Model: TS2-2500-144x60 Stroke: 20" SPM: 9-18 Adjustment: 12", Shut height: 52" Cushion : Cushion Capacity: 240T Total Cushion: 48T Each Stroke: 9", Under Power.
11'6" x 22' Metso, horizontal ball mill with 1100 KW Weg motor, 3" max ball size, rubber liner assembly
Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Metso
SKU: 123727, Condition: Used, S/N: 75806, Additional :, Total ball charge weight: 100 ton, Max ball size: 3", Rubber liner assembly, Powered by: WEG HGF7006 1100 kw, 4000v, 1194 rpm motor, Includes:, - Santasalo gear box, - Farval SS 4500, - Automatic digital lubrication system.
150 Ton, Dake #18-293, 4-post, hydraulic press, 28" stroke, 36" open, PLC Control, 1980
Machine Tool Bids | Chicago, IL
Category: Hydraulic Presses
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Dake
Model: 18-293
Year: 1980
MACHINE, Tonnage: 150, Stroke: 28", Bed Size: 48" Wide x 38" Deep, Max Opening: 36", Min Shut Height: 8", Type: 4 Post Hydraulic Press.
1000 Ton, Ermaksan #Power-Bend, double tandem press brake, 46.6' bend L, 39.3" throat, Delem 66T Control, 2022
VX Machinery | Sylvania, OH
Category: CNC Press Brakes
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Ermaksan
Model: POWER-BEND
Year: 2022
, Manufacturer: Ermakstan, Bending Length: 46.58’, Tonnage: 1000 Tons, Throat Depth: 39.34”, Delem 66T Controller, 2-Axis Backgauge, Motorized Crowning, Laser Bend Line.
10' x 5.9" Hugh Smith, vertical plate roll, 1200 ton
Prestige Equipment Corp | Melville, NY
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Hugh Smith
, Maximum Tonnage Capacity: 1200 Tons, Maximum Plate Width: 120", Main Roll Diameter: 23", Maximum Plate Thickness: 5.90", Maximum Bolster Width: 22.99", NOTE:, Inspect Under Power In Plant.
1200 Ton, Minster #E2-1200-120-60, straight side double crank stamping press, 12" stroke, 44" Shut Height, 12" adj., 25-45 SPM, 2014
Master Machinery LLC | Detroit, MI
Seller: Master Machinery LLC
Location: Detroit, MI
Mfr: Minster
Model: E2-1200-120-60
Year: 2014
Manufacturer Minster Model E2-1200-120-60 Year 2014 Condition Used Stock Number 11554 Capacity 1200 ton Bed area 120"x60" Stroke length 12" Shut height 44" Adjustment 12" Strokes per minute 25-45 Additional s Wayne Trail Transfer.
150 Ton, Pacific #K150-16, hydraulic press brake, 16' overall, 192" between housing, 12" stroke, 24" throat, 17" open height
G-2000 | Toledo, OH
Category: Hydraulic Press Brakes
Seller: G-2000
Location: Toledo, OH
Mfr: Pacific
Model: K150-16
SERIAL.: 9450, MODEL.: K150-16, TONNAGE.: 150, DISTANCE BETWEEN HOUSINGS.: 192", OVERALL LENGTH OF BED.: 204", STROKE.: 12", OPEN HEIGHT.: 17", CLOSED HEIGHT.: 5", THROAT.: 24", Machine Type.Brakes, Hydraulic Manufacturer.PACIFIC Model.K150-16 Year.N/A Condition.Used.
100 Ton, Hydraulic Die Tryout & Spotting Press, 42.5" daylight, 34" x50" platens, 3000 psi clamping pressure, shuttle table
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Capacity, Approx.: 100 Ton, Clamping Pressure, Max.: 3000 PSI, Daylight: 42-1/2", Between Posts: 48", Platens: 34" x 50", Booking On Upper Platen, Shuttle Table, Control Console, MOTOR DATA: 30 HP Hydraulic Power Unit.
150 Ton, 12.7 oz., Engel #650TL/150US, horizontal injection molding machine, EC100 Control, 2004
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: 650TL/150US
Year: 2004
, New in 2004, 150 Ton ENGEL TL 650/150 US:, Shot size: 12.7 Oz, Platen Size: 33.46" x 27.56", Max. Open daylight: 33.46", Control: EC100, Hour meter: 1,123, Machine is in good running conditions. Under power., Imperial Metric Tonnage 150 T 136.078 t Shot Size 12.7 oz 360 g Year 2004 2004.
1350 Ton, Pacific #1350D-10/80, hydraulic press, 48" stroke, 66" daylight, 120" x80"bed, 1650 gallon reservoir, w/ cushion, 2010
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Pacific
Model: 1350D-10/80
Year: 2010
For sale: Used 1350 Ton Pacific Model 1350 D-10/80 Straight Side Hydraulic Press, 2010. Includes cushion. : 1350 T, 120x80 in bed, 48 in stroke, 66 in daylight. s 2x125 HP motors, 1650-gallon reservoir, and more., Capacity:, Forming: 1350 Ton, Punching: 900 Ton, Stroke: 48", Daylight Opening: 66", Closed Height: 18" ...more
150 Ton, Minster #P2-150-54 PieceMaker, double crank sngl side press, 6" stroke, 23" Shut Height, 45-90 SPM, 4" adj, 54" x 40" bed, 60 psi air clutch, servo feed w/ console
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Minster
Model: P2-150-54
150 Ton Minster P2-150-54 Piecemaker Straight Side Punch Press #7773, Tonnage: 150 Tons, Stroke: 6", Strokes/Min: 45-90 SPM, Bolster Area: 54" x 40", Shut Height on Bed Stroke: 23", Slide Adjust: 4", Clutch Air Pressure: 60 psi, Dual Palm Button Control & Console, Coe Servo Master Feed w/ Console, Di Pro 1500 ...more
150 Ton, Minster #P2-150-54 PieceMaker, double crank sngl side press, 6" stroke, 23" Shut Height, 45-90 SPM, 4" adj, 54" x 40" bed, 60 psi air clutch, servo feed w/ console (2 available)
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Minster
Model: P2-150-54
150 Ton Minster P2-150-54 Piecemaker Straight Side Punch Press #7774, Tonnage: 150 Tons, Stroke: 6", Strokes/Min: 45-90 SPM, Bolster Area: 54" x 40", Shut Height on Bed Stroke: 23", Slide Adjust: 4", Clutch Air Pressure: 60 psi, Dual Palm Button Control & Console, Coe Servo Master Feed w/ Console, Di Pro 1500 ...more
150 Ton, Dake #18-467, 4-post downacting hydraulic spotting press, 24" stroke, 60" shut height
G-2000 | Toledo, OH
Category: Die Tryout and Spotting Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Dake
Model: 18-467
SERIAL. 166827MODEL. 18-467YEAR. 1973CAPACITY. 150 TONSNUMBER OF POSTS. 4RAM SIZE. 116" X 52"BOLSTER SIZE. 116" X 72"ROLL OUT BOLSTER. YESDISTANCE BETWEEN POSTS. 55" X 114"SHUT HEIGHT. 60"STROKE. 24"TOP MOUNTED HYDRAULIC UNIT. YES, Machine Type.Presses, Die Tryout & Spotting Manufacturer.DAKE Model.18-467-4 ...more
100 Ton, Minster #P2-100-48, high speed press, 5" stroke, 22" Shut Height, 4" adjustment, 50-100 SPM
S & G Press & Machinery Sales | Shelby Township, MI
Category: High Speed and Automatic Presses
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: P2-100-48
Tonnage 100, Stroke 5 inches, Shut Height 22 inches, Adjustment 4 inches, Bed Size 48" x 31", Ram Area 48" x 18.5", SPM 50-100, Standard, Used Minster High-Speed Mechanical Press, Model P2-100-48 "Piece-Maker", 5" Stroke, 22" Shut Height, 4" Adjustment, 48" LR x 31" FB Bed Area, 48" LR x 18.5" FB Slide Area, 50-100 ...more
1000 Ton, National #MaxiPress, Cieco PLS Plus controls, 10" stroke, 32" x 45" bed, 75 SPM, 1979
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
Model: MAXIPRESS
Year: 1979
1000 TON NATIONAL MAXI PRESS, 1979, TON 1000 T, BED L-R 32 IN, BED F-B 45 IN, STROKE 10 IN, SPEED 75 SPM, WINDOWS 18 IN, BED AREA: 32" LR X 45" FB, SLIDE AREA: 30" LR X 30" FB, CIECO PLS PLUS CONTROL, PWI TONNAGE MONITOR, DUAL PALM BUTTONS, FOOT PEDAL, TOP AND BOTTOM KNOCK OUTS, NOTE: BOLSTER AND RAM PLATES NOT ...more
150 Ton, Yao Sheng #TUVB-1J0P, hydraulic press, 7" stroke, 20 HP, 30" x26" bed, 2006, #68628 (2 available)
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yao Sheng
Model: TUVB-1J0P
Year: 2006
MODEL. TUVB-1J0P, YEAR. 2006, CAPACITY. 150 TON, STROKE. 7" EST, RAM. 17" X 16", AREA OF BED. 30" X 26", BOLSTER PLATE T SLOTTED. 26" X 26" X 6", OPEN HEIGHT. 18", CLOSED HEIGHT. 11", DUAL PALM BUTTONS. YES, MOTOR. 20 HORSEPOWER.
1000 Ton, 165 oz., Engel #Duo-11050/1000WP, 55.1" x 45.27" tie bar spacing, 2005
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: DUO-11050/1000WP
Year: 2005
, 2005 1000 Ton Engel DUO 11050/1000 WP (Wide Platen):, Shot size: 165 Oz, Tie bar spacing: 55.1" x 45.27", Platen size: 78.7" x 72", Hour meter reads: 7,962, Machine is under power and in good running conditions., Imperial Metric Tonnage 1,000 T 907.186 t Shot Size 165 oz 4,677.7 g Year 2005 2005.
45 -2500 Ton, Primeline #C-Series, Hydraulic Press Brakes, 4-Axis to 12-Axis, 4'-40' Length Range, New
Comeq Inc | White Marsh, MD
Category: Hydraulic Press Brakes
Seller: Comeq Inc
Location: White Marsh, MD
Mfr: Primeline
Model: C-SERIES
Primeline The C Series of hydraulic press brakes are meant for Performance, Accuracy and Speed., Cylinder pistons are ground, hard-chrome plated. Fully adjustable servo valves paired with linear scales ensure the machine maintains its 0.0004 repeatability. An easy to operate CNC controller allows to program up to 12 ...more
150 Ton, Verson #150-OBI, 8" stroke, 22" Shut Height, 6" adj., 30" x50" bed, 35 SPM, air clutch & brake, 1970
Rygate, LLC | Clarkston, MI
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Verson
Model: 150-OBI
Year: 1970
150-ton Capacity, 8" Stroke, 22" Shut Height, 6" Motorized Adjustment, 50" LR x 30" FB Bed Area, 34" LR x 24" FB Slide Area, 35 SPM, Overall Height: 13'9" tall.
JUST ADDED!
100 Ton, Amada #FBD1025NT, CNC Press Brake, 98" bending length, 5.91" stroke, 1.7' throat depth, 16.54" open height, (10) quick-connect die holders, AMNC controls, 460/230 Volt, 2007
James G Murphy Co | Marysville, WA
Category: CNC Press Brakes
Seller: James G Murphy Co
Location: Dallas, OR
Mfr: Amada
Model: FBD1025NT
Year: 2007
98" X 100 TON CNC PRESS BRAKE, BACK GAUGE, (10) QUICK CONNECT DIE HOLDERS, AMNC CONTROLS.
JUST ADDED!
100 Ton Wysong & Miles #MTH100-120, Press Brake, 10' overall, Automec CNC-2000, 460 V.
HGR24 | Euclid, OH
Category: CNC Press Brakes
Seller: HGR24
Location: Euclid, OH
Model: MTH100-120
Inventory No. 0226-134-0001 Manufacturer Wysong & Miles Company Model No. MTH100-120 Name Press Brake Arrival Date 03-30-2026 Dimensions L x W x H (inches) 137 x 70 x 110 Capacity 100 TONS / 120" Electrical 3/60/460 Weight (lb.) 16707 Category Fabrication Condition Used Available Quantity 1 Serial No. MT7-215 Item ...more
150 Ton, Atlantic #SRM150-12, hydraulic press brake, 12' overall, 124" between housing, 7.8" stroke, 15.7" daylight, ATS600, foot pedal, 2003
Blackstone Machinery | Cerritos, CA
Category: Hydraulic Press Brakes
Seller: Blackstone Machinery
Location: Cerritos, CA
Mfr: Atlantic
Model: SRM150-12
Year: 2003
Year: 2003, Make: Atlantic, Model: SRM150-12, Tonnage: 150 Tons, Overall Length: 144", Between Housing: 124", Stroke: 7.8", Daylight Opening: 15.7", Weight: 20,000lbs, Dimensions: 162" x 101" x 67"H, ATS600 Control, Foot Pedal, *Flush Floor, *Sold as is where is with no guarantees or ...more
150 Ton, Dake #18-293, 4-post, hydraulic press, 28" stroke, 36" open, PLC Control, 1980
Machinery Marketing International | Chicago, IL
Category: Hydraulic Presses
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Dake
Model: 18-293
Year: 1980
Dake Model 18-295 150 Ton Four Post Hydraulic Press 28" Stroke 36" Daylight 48"x38" Table, Tonnage: 150, Max Opening: 36", Min Shut Height: 8", Stroke: 28", Bed Size: 48" Wide x 38" Deep, Type: 4 Post Hydraulic Press.
Toledo #AC-100, 100 ton transuders auto load cells, digital display, 9 Volts (2 available)
Yoder Machinery Sales | Holland, OH
Category: Electrical MRO Components & Parts
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Toledo
Model: AC-100
SERIAL. 4728A, MODEL. AC-100, NUMBER OF LOAD CELLS. 2, CAPACITY. 100 TON EACH, ACCURACY. 0.5 PERCENT FS, NON-LINEARITY. 0.3 PERCENT FS, OVERLOAD. 150 PERCENT OF CAPACITY, RESOLUTION. 0.1 TON US, WEIGHT. 9.25 LB, DISPLAY. DIGITAL, POWER. 9 VOLTS, DIMENSION. 5-1/2" X 5-1/4" X 4" HIGH.
JUST ADDED!
100 Ton, Minster #P2-100-48-31 Piece-Maker, straight side double crank, 5" stroke, 18" Shut Height, 4" adj., 50-100 SPM, 48" x31" bed, 16" window, air clutch & brake, 1970
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2-100-48-31
Year: 1970
(1) Used 100 Ton Minster P2-100-48-31 Piece-Maker Straight Side Press, Capacity: 100 Ton, Stroke: 5", Bed Size: 48"LR x 31"FB, Slide Area: 46"LR x 18"FB, Adjustment: 4", Shut Height: 18", Speed: 50-100 SPM, Windows: 16", Air Clutch & Brake, Capacity: 100 Ton, Stroke: 5", Bed Size: 48"LR x 31"FB, Slide Area: 46"LR ...more
1000 Ton, 192.8 oz., UBE #Servomax-1000W, hybrid horizontal plastic injection molder, 60" x50" tie bar spacing, 107.86" daylight, 2015
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Ube
Model: SERVOMAX-1000W
Year: 2015
, 2015 1000 Ton UBE Servomax 1000W UST, Hybrid (Servo Hydraulic), Shot size: 192.8 oz, Screw diameter: 112 mm, Tie bar spacing: 60" x 50", Platen size: 76.92" x 66.59", Max. Open daylight: 107.86", Hours: 31,000, 2 core pull, 2 air blow, Valve Gates., Ran PP and ABS., Notes: Good overall condition., Imperial Metric ...more
150 Ton, Minster #P2-150-48, straight side double crank, 5" stroke, 21" Shut Height, 4" adj., 48" x40" bed, 150 SPM
Rygate, LLC | Clarkston, MI
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Minster
Model: P2-150-48
MINSTER P2-150-48, Tonnage. 150 T, Stroke. 5", Shut Height. 21", Bed area (Left to right). 48", Bed area (Front to back). 40", SPM min. 0 strokes/min., SPM max. 150 strokes/min., Adjustment. 4".
1000 Ton, Verson #S4-1000-144-84T, Straight Side Mechanical Stamping Press, 144" x 84" Bed & Ram Size, 20" Stroke, 60" Shut height, 13-26 VSPM, 1978, 1978
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Verson
Model: S4-1000-144-84T
Year: 1978
Tonnage 1000, Stroke 20 inches, Shut Height 60 inches, Adjustment 14 inches, Bed Size 144" x 84" FB, Ram Area 144" LR x 84" FB, SPM 13-26 VSPM, Preliminary, 1000 ton Verson Metal Stamping Press, Straight Side Double Crank Mechanical, Press Model S4-1000-144-84T, 1000 - ton Capacity, 20" Stroke, 60" Shut Height, 14" ...more
100 Ton, Niagara #E-90-S, gap frame press, 4.5" stroke, 15.75" Shut Height, 4.5" adjustment, 25" x 39" bed, 46 SPM, 1989
G-2000 | Toledo, OH
Category: Gap Frame Single Crank Press Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Niagara
Model: E-90-S
Year: 1989
• Model E-90-S, • Capacity 100 Tons, • Stroke 4.5”, • Shut Height 15.75”, • Adjustment 4.5”, • Bed size 25” x 39”, • Slide size 20” x 27.5”, • SPM 46, • Year 1989, Machine Type.Presses, Gap Frame (OBS) Manufacturer.NIAGARA ...more
1000 Ton, Bliss, knuckle joint press
National Machinery Exchange | Newark, NJ
Category: Knuckle Joint Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
1000 TON BLISS #27 KNUCKLE JOINT PRESS, MANUFACTURER - BLISS, MODEL NUMBER - 27, TONNAGE - 1000 TON, YEAR - 1960, SERIAL NUMBER - CN-3015, STROKE - 2 ", SHUT HEIGHT - 31 ", ADJUSTMENT - ", BED L-R F-B - 24 X 22, STROKES PER MINUTE - 50, AIR CLUTCH - YES, APPROXIMATE DIMENSIONS - 8' 6" X 16' X 9' ...more
100 Ton, Italpresse #PM/DE/1, Hydraulic Cold Compression Press., 16 stroke, never Used, 2008
G-2000 | Toledo, OH
Category: Molding Compression Hydraulic Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Italpresse
Model: PM/DE/1
Year: 2008
MODEL.: PM/DE/1, YEAR NEW.: 2008, TONNAGE.: 100, STROKE.: 16", DAYLIGHT OPENING.: 3.9" - 19.6", BOLSTER DIMENSIONS.: 98" X 51", RAM DIMENSIONS.: 98" X 51", DISTANCE BETWEEN UPRIGHTS.: 24", LOADING HEIGHT.: 36", SPEED ADJUST.: YES, RACK AND PINION PARALLEL SYSTEM.: YES, DIGITAL PRESSURE CONTROL.: YES, Machine ...more
100 Ton, Aida #PD010, mechanical press, 6.6"stroke, 2.9"adj., 50 SPM, 64.9"x23.5" bolster area
Machinery Marketing International | Chicago, IL
Category: Mechanical Press Brakes
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Aida
Model: PD010
Capacity: 100 Tons, Stroke: 6.60", Strokes Per Minute: 50, Bolster Area: 64.90" x 23.50", Slide Area: 49.20" x 19.60", Slide to Bolster: 15.7", Slide Adjustment: 2.90".
