Buy or Sell Your Vertical Lathe
Recommended Categories for vertical lathe
AI-ranked results for vertical lathe - closest matches first
4 Stand, Tishken #4-MW-2, rollformer with 3-Axis straightener, 2" arbor diameter, 14" roll space
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 4-MW-2
TISHKEN FOUR STAND ROLL FORMER, MODEL NUMBER. 4-MW-2, SERIAL NUMBER. 21094293, ARBOR DIAMETER. 2", ROLL SPACE. 14", LOWER ARBOR FROM BASE TOP. 5", VERTICAL ADJUSTMENT. 3", ESTIMATED DC DRIVE. 20HP, A 3 AXIS STRAIGHTENER YES, MISSING ONE OUTBOARD SUPPORT.
350 gallon Lee #350U9MS, Stainless Steel jacketed mix tank, 125 psi, dish top, 1994
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Lee
Year: 1994
Used Approximately 350 Gallon Stainless Steel Jacketed Mix Tank, Manufacturer: Lee Industries, Capacity: 350 gallons, National Board: 6168, Model: 350U9MS, Serial: C1126A2, Year: 1994, Internal rated full vacuum @ 250F, Jacket pressure: 125 psi @353F, Top, bridge-mounted agitator with, Dish top, Mounted on (4) ...more
21" Cincinnati #21" Box Column, single spindle drill, 16" x16-1/2" table, 3 HP, #74918
Yoder Machinery Sales | Holland, OH
Category: Single Spindle Drill Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 21BOX
SERIAL. 1L-2158, MODEL. 21" BOX COLUMN, SPINDLE TO LOWER COLUMN. 11", SPINDLE TO UPPER COLUMN. 10", SPINDLE TO TABLE. 22-1/4" MAX., SPINDLE SPEEDS. (9) 175 TO 3500 RPM, SPINDLE FEEDS.004/.008/.014/.020 IPR, SPINDLE STROKE (POWER). 9-3/4", SPINDLE NOSE DIAMETER. 2-13/16", SPINDLE TAPER. #4 MT, TABLE AREA. 16" X ...more
Wilson Instruments Rockwell #3-TT-BB, Hardness Tester, 8" gap, 5-1/2" reach
Norman Machine Tool Ltd | Baltimore, MD
Category: Hardness Testers
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Rockwell
Model: 3-TT-BB
Wilson Instruments 8″ Rockwell Hardness Tester, 3 TT BB, Inventory # 9955-C, Model: 3 TT BB, S/N: 730, Vertical Gap: 8″, Horizontal Reach: 5 1/2″, Mechanical :, Dimensions: 17 1/2″ x 11 1/2″ x 27 1/2″ H, Weight: approx. 325 lbs., FOB Our Baltimore, MD Warehouse, Related.
200 gallon Stainless Steel Vertical Tank, 36" diameter x 52" Straight Side, Welded Dish Top and Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 200 Gallon Stainless Steel Tank, Capacity: 200 gallons, Dimensions: 36" dia. x 52" straight side, Welded dish top and bottom, Additional information: Short skirt support. Connections; top - (2) 2" FLG, bottom - 1 1/2" center flange., _UNKNOWN_ 200 GALLON, Capacity. 200 gal, Diameter. 3', Height. ...more
40" x 120" Sharp #SHDC-40120, double column grinder, ADI NC Control, automatic downfeed, new
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: SHDC-40120
40” X 120” Dual Column Surface Grinder with ADI NC Controller, Table Mounted Diamond Dresser, Auto Down Feed with MPG, Ball Screw on Cross Feed, Automatic Down Feed, ADI (NC control with MPG) Lead Screw on Vertical, Criss Cross Grinding, Cross Feed Stroke Adjuster by Electronic One Touch System., STANDARD ...more
700 HP 1200 RPM Westinghouse, Frame 5809P30, WPIIBB, 4160 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: Westinghouse
Frame: 5809P30
Stock #: 59805 Category: Vertical Motors HP: 700 RPM: 1185.00 Frame: 5809P30 Enclosure: WPIIBB Make: Westinghouse Volts: 4160 Service Factor: 1.0 Condition: Electrically O.K. Location: Toledo, OH.
94 gallon Winbco, 304L Stainless Steel vertical tank, 2' dia. x 4' high, dished top head, flat bottom head
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Winbco
Used Approximately 94 Gallon Stainless Steel Tank, Manufacturer: Winbco, Capacity: 94 gallons, Year: 2015, Dimensions: 24" dia. x 4'0" straight side, Material of construction: 304 stainless steel, Dish top, flat bottom, Additional information: 3/16" wall thickness, mounted on legs, 2015 WINBCO 94 Gallon, Capacity. ...more
4 Stand, Dexter, rollformer, 2.125" diameter Shaft, 5" roll space, 9" horizontal centers, 2" vertical adj.
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
MODEL #: N/A, SERIAL #: R-3111, 2.125" DIAMETER SHAFTS, 5" ROLL SPACE, 9" HORIZONTAL CENTERS, 2" VERTICAL ADJUSTMENT, CURRENTLY TOOLED FOR 15" CORVETTE WHEEL TRIM, MOTOR: 3HP 230/460/60/3, 60" LR x 48" FB x 70" TALL, 4000 LBS ESTIMATED WEIGHT, GOOD CONDITION.
180 gallon Stainless Steel vertical tank, 30" dia. x 5' straight side, dished heads
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Stainless
Used Approximately 180 Gallon Stainless Steel Mix Tank, Capacity: 180 gallons, Dimensions: 30" dia. x 5' straight side, Top, off-center moutend Lightnin dual prop agiator driven by a 1 hp motor, Dish top, dish bottom, Additional information: 2" center bottom outlet and 3" side bottom flange. Mounted on (4) legs ...more
Kearney & Trecker #3K, horizontal, 15-1/2" x64" table, 10 HP, Bijur 1 shot lube, dual controls
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: -3K
SERIAL., MODEL. 3K, AREA OF TABLE. 64" X 15-1/2", SPINDLE SPEEDS. (24) 15 TO 1500 RPM, LONGITUDINAL & CROSS FEEDS. (32) 1/4 TO 60 IPM, VERTICAL FEEDS. (32) 1/8 TO 30 IPM, LONGITUDINAL TABLE TRAVEL.,. 34", CROSS TRAVEL. 12", VERTICAL TRAVEL. 18", TAPER IN SPINDLE. #50, DISTANCE TABLE TO CENTER OF SPINDLE. 0" MIN. ...more
17" x 80" Clausing #17" Colchester, engine lathe, 10-1/2" swing over cross slide, inch/metric, 10 HP, #73323
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Clausing
Model: 17COLCHESTER
SERIAL. 7/0012/01673, MODEL. 17" COLCHESTER, YEAR NEW. 1975, SWING OVER SLIDE. 17", SWING OVER CROSS SLIDE. 10-1/2", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. (16) 20 TO 1600 RPM, FEEDS.002 TO.032 IPR, THREADING (INCH). (36) 2 TO 72 TPI, METRIC THREADING. (36).4 TO 14 MM PITCH, DIAMETER OF SPINDLE HOLE. 3" ...more
Masterwood DOOR-LINE, CNC Feed Through Door Line Boring Mach., Perimeter security grid, (2) Motorized In-feed belts, 2008
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Masterwood
Model: DOOR LINE
Year: 2008
MASTERWOOD DOOR LINE BORING MACH. (FEED THRU CNC DOOR LINE): -- :Automatic CNC Working Center for the milling operations of doors (for the lock, key, and handle), as well as drilling & screwing of "ANUBA" hinges. -- Machine Composition: Perimeter security grid: (2) Motorized Infeed belts; separate electric cabinet ...more
50 gallon Stainless Steel Tank, 30" diameter x 20" Straight Side, Dish Top and Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 50 Gallon Stainless Steel Tank, Capacity: 50 gallons, Dimensions: 30" dia. x 20" straight side, Dish top, dish bottom, _UNKNOWN_ 50 GALLON, Capacity. 50 gal, Diameter. 2.5', Height. 1.67', Type of stainless. Stainless Steel, Type Of Heads. Dish, Vertical/Horizontal. Vertical, Dimensions. 30" ...more
13-3/4" Sanyo Seiko Co - Somax Lathe Chuck, 4 Jaw
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Mfr: Seiko
Spec Sheet:, Sanyo Seiko Co Somax Lathe Chuck 13-3/4 4 Jaw, USED, Brand: Sanyo Seiko Co, Somax Lathe Chuck, Jaws: 4, Overall Diameter: 13-3/4, Through Hole: 3.
13-3/4" Sanyo Seiko Co - Somax Lathe Chuck, 4 Jaw
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Mfr: Seiko
Spec Sheet:, Sanyo Seiko Co Somax Lathe Chuck 13-3/4 4 Jaw, USED, Brand: Sanyo Seiko Co, Somax Lathe Chuck, Jaws: 4, Overall Diameter: 13-3/4, Through Hole: 3.
40" x 50" Ryazan #3, gap bed engine lathe, 4-jaw 39" chuck, 2-Axis Newall C80 digital read out, 20 HP, 1990
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ryazan
Model: 3
Year: 1990
SERIAL. 286-01, MODEL. 3, YEAR NEW. 1990, SWING OVER WAYS. 40.5", SWING IN GAP. 58", DISTANCE BETWEEN CENTERS. 50", SPINDLE SPEEDS. 5 TO 500 RPM, FEEDS. 0.0075 TO 0.0109 IPR, THREADS. 2 TO 28 TPI, METRIC THREADS. 05. TO 28 MM PR, CHUCK. 39" 4 JAW, DIAMETER OF SPINDLE HOLE. 5.25", TAOER ATTACHMENT. YES, RAPID TRAVERSE. ...more
Blanchard #32K-60, rotary surface grinder, 60" chuck, remanufactured w/1 yr warranty
F P Miller Company | Jackson, MI
Seller: F P Miller Company
Location: Jackson, MI
Mfr: Blanchard
Model: 32K-60
Chuck Dia.: 60 inches Spindle (Horz/Vert): vertical Power: No Attached horsepower Swing: No Attached inches Under Wheel: No Attached inches Table Speeds: No Attached Grinding Wheel Width: No Attached inches Table Motor Horsepower: No Attached horsepower Grinding Wheel Dia.: No Attached inches CNC Control: No Attached ...more
90 gallon GMW Inc., Stainless Steel Pressure Vessel, Vertical, 20" diameter x 64" Straight Side, 30 psi @ 200°F Internal, Dish Top and Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Gmw Inc.
Used Approximately 90 Gallon Stainless Steel Pressure Vessel, Manufacturer: GMW Inc., Capacity: 90 gallons, National Board: 011, Serial: 22780, Year: 1988, Internal pressure: 30 psi @ 200F, Dimensions: 20" dia. x 64" straight side, Dish top, dish bottom, Hinge-lid, Mounted on legs, GMW INC. 90 GALLON, Capacity. 90 ...more
Sharp #LMV/MP2, vertical mill, 9" x42"tbl., 3 HP, 25" X, 11" Y, 5" Z, 60-4500 RPM, R-8, AcuRite Millpwr MP2, Kurt power draw bar
Machinery Central | Louisville, KY
Category: CNC Vertical Bed Mills
Seller: Machinery Central
Location: Louisville, KY
Mfr: Sharp
Model: LMV/MP2
, Enhance your production with a used SHARP LMV/MP-2 CNC Mill featuring Acu-Rite MP2 control, 9x42" table, and Kurt PDB. Perfect for precision machining with versatile speeds and travel options. Includes 3-axis DRO, chrome ways, and swivel vice., Spec Sheet:, Standard s, 9 x 42 table, 11 x 25×5 travel, Vari ...more
40" x 60" Birmingham #DL4060, gap bed engine lathe, 28" swing over cross slide, 3-jaw 24" chuck, 20 HP, 2001
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Birmingham
Model: DL4060
Year: 2001
SERIAL. Z633, MODEL. DL4060, YEAR NEW. 9/2001, SWING OVER WAYS. 40", SWING OVER CROSS SLIDE. 28", SWING IN GAP. 48", 48"DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. 7.5 TO 1000 RPM, FEEDS CROSS. 001 TO.48 IPR, FEEDS LONGITUDINAL.002 TO 96 IPR, THREAD ENGLISH. 2 TO 56 TPI, THREADS METRIC. 05 TO 12 MMPR, SPINDLE HOLE. ...more
16" x 40" Tos #SN40C, gap bed engine lathe, 8-3/4" swing over cross slide, 3 & 4-jaw chucks, 5 HP, 1997
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tos
Model: SN40C
Year: 1997
SERIAL. 684010970616, MODEL. SN40C, YEAR NEW. 1997, SWING OVER WAYS. 16, SWING OVER CROSS SLIDE. 8-3/4", SWING IN GAP. 25", DISTANCE BETWEEN CENTER. 40", SPINDLE SPEEDS. 22.4 TO 2000 RPM, FEEDS.0002 TO.195 IPR, THREADS. 1-1/2 TO 80 TPI, METRIC THREADS.05 TO 40 MM PITCH, DIAMETER OF SPINDLE HOLE. 2.2", CHUCK 3 & 4 ...more
10000 gallon Northland Stainless Steel tank, 96" dia. x 312" straight side, flat sloped bottom 1981
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Northland
Used Approximately 10,000 Gallon Stainless Steel Tank, Manufacturer: Northland Stainless Steel Inc., Capacity: 10,000 gallons, Year: 1981, Dimension: 96" dia. x 312" straight side, Cone top, flat sloped bottom, Insulation, 1981 NORTHLAND STAINLESS, INC. 10,000 GALLON, Capacity. 10,000 gal, Diameter. 8', Height. ...more
Cam-wood VPS-TWIN, Aluminum Composite Vertical Panel Saw, 78-3/4" x 157-1/2, 4 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD - VPS Twin,.Automatic Vertical Panel Saw, for Cutting & Grooving Aluminum Composites (78-3/4" x 157-1/2").The VPS TWIN is engineered with specific s for cutting or grooving Aluminum Composite or similar materials. Top to Bottom cutting height is 2,000 mm (78-3/4"). Saw head w/motor rotates 90 for rip or ...more
13" x 40" Turnmaster #1340, engine lathe, 8-1/4" swing over cross slide, inch/metric, 4-jaw 10" chuck, 1986
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Turnmaster
Model: 1340
Year: 1986
SERIAL. 13484120878D, MODEL. 1340, YEAR NEW. 1986, SWING OVER WAYS. 13-3/8", SWING OVER CROSS SLIDE. 8-1/4", DISTANCE BETWEEN CENTERS. 40", SPINDLE SPEEDS. (16) 35 TO 2500 RPM, DIAMETER OF SPINDLE HOLE. 1.5", THREADS (ENGLISH). (45) 2 TO 72 TPI, THREADS (METRIC). (39) O.2 TO 14 TPMM, LONGITUDINAL FEEDS. 0.002 TO 0.067 ...more
600 gallon Tycon, Glass Lined Tank, Vertical, 36" diameter x 144" straight side, 50 psi/FV @ 450°F, 3"/2"/8" Openings
Perry Videx LLC | Hainesport, NJ
Category: Glass Lined Tanks & Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Tycon
Used Tycon approximately 600 gallon glass lined tank. 36" diameter X 12' straight side. 50 psi/full vacuum @ 450F. Openings: (3) 3", (1) 2", (1) 8"., TYCON 600 GALLON, Capacity. 600 gal, Internal Pressure. 50 psi, Internal Temperature. 450F, Vertical/Horizontal. Vertical, Diameter. 36", Straight Side. 12 ...more
100 gallon 100/FV psig, 24" ID x 54" L, QCIW INC #R785P, Vertical Carbon Steel Vessels, 710°F
EcReCon Inc. | Pedericktown, NJ
Category: Pressurized Carbon Steel Tanks
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Qciw Inc
Year: 1975
, (3) 100 Gallon Vertical Carbon Steel vessels rated 100PSI/Full Vacuum. 24" Dia.x 4'6" T/T. Thickness: Shell.25", Heads.312". Built by QCIW. Each have NB#'s., 1975 QCIW INC R7582P, Gallons. 100 gal, PSIG. 100/FV, ID - Inches. 24 in, Length. 4'6", Temp (F). 710, Material. Carbon Steel, Vert/Horiz. V ...more
6" x 18" Brown & Sharpe #618-Valuemaster, hand feed surface grinder, electromagnetic chuck, Acu-Rite QwikCount 2-Axis digital read out, 1985
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Brown & Sharpe
Model: 618-VALUEMASTER
Year: 1985
6" X 18" BROWN… SHARPE (MADE IN JAPAN BY AMADA Co.)"SUPER-PRECISION" HAND FEED SURFACE GRINDER WITH 2-AXIS DIGITAL READOUT MODEL: 618 VALUEMASTER… S/N: 523-2618-4055 NEW: 1985… : COLUMN TYPE DESIGN -… COLUMN MOVES FOR CROSS FEED.… ROLLER BEARING TABLE FINE FEED ...more
16 Stand, B & K, rollformer gearboxes w/ outboards, 1-1/2" spindle diameter, 12" rollspace, 4.5"-7.5" vertical adj
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: B & K
PRICE: $2,500 Per Gearbox, UTUBE NUMBER: 2944, MANUFACTURER: B&K, MODEL NUMBER:, SERIAL NUMBER:, YEAR:, (Per Gearbox), Spindle Diameter: 1-1/2", Roll Space: 12", Spindle Key Size: 1/4", Base Top to Center Lower Spindle: 7-1/4", Vertical Adjustment: 4-1/2" – 7-1/2", PRICE: $2,500.00 ...more
20" x 80" Longem #LG-2080DS, gap bed engine lathe, 11" SOCS, 4-jaw 16" chuck, digital read out, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Longem
Model: LG-2080DS
SERIAL. 120757, MODEL. LG-2080DS, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 11", SWING IN GAP. 28", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. (24) 18 TO 1600 RPM, DIAMETER OF SPINDLE HOLE. 3-1/8", RAPID TRAVERSE. 4 WAY, LONGITUDINAL FEEDS. 0.0011 TO.064 IPR, THREADS METRIC. 0.5 TO 96 MM, 4-JAW CHUCK. 16", 2 ...more
4 Jaw Lathe Chuck - 7-3/4" Diameter
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Spec Sheet:, 4 Jaw Lathe Chuck 7-3/4 Diameter, USED, Lathe Chuck, Jaws: 4, Overall Diameter: 7-3/4, Through Hole: 1-1/4, No Jaws included.
4 Jaw Lathe Chuck - 7-3/4" Diameter
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Spec Sheet:, 4 Jaw Lathe Chuck 7-3/4 Diameter, USED, Lathe Chuck, Jaws: 4, Overall Diameter: 7-3/4, Through Hole: 1-1/4, No Jaws included.
Bridgeport #Series-I, ram type vertical mill, 9" x48" table, 2 HP, AcuRite III digital read out, #76513
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bridgeport
Model: SERIES-I
SERIAL. 244557, SERIES. 1, YEAR NEW. 1999, AREA OF TABLE. 48" X 9", SPINDLE SPEEDS, VARIABLE. 60 TO 4200 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL (SERVO). 30", CROSS TRAVEL (SERVO ). 12", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 12", DEPTH OF THROAT. 6-3/4" TO 18-3/4", TAPER IN ...more
3" 4 Jaw Lathe Chuck w/ 5C Collet Mount
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
, Used 3" 4-Jaw Lathe Chuck with 5C Collet Mount, perfect for precision tooling needs. s a 3" overall diameter, 6-1/4" OAL, and a robust 4-jaw design. Ideal for professionals seeking reliable tooling accessories., Spec Sheet:, 3"- 4 Jaw Lathe Chuck w/ 5C Collet Mount, USED, 4 Jaws, Type: Lathe Chuck, Overall Diameter: ...more
8" Buck, 4-Jaw Lathe Chuck w/ plain back
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Mfr: Buck
, BUCK 8-inch 4-jaw lathe chuck available, perfect for enhancing your machining capabilities. This used tooling accessory ensures secure workpiece holds. Ideal for professionals seeking reliable performance in lathe operations., Spec Sheet:, 8" Buck 4 Jaw Lathe Chuck, Plain Back, Fits on a 3.17" Spindle Nose, 2" Hole.
JUST ADDED!
Lathe Chuck Jaws, 3 piece set
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Spec Sheet:, Lathe Chuck Jaws 3 Piece Set, Used, Lathe Chuck Jaws, Set of 3, Measured Dimensions:, Height: 3-3/8, Width: 7/8, Deep: 2-1/2, Gap between Teeth on back: 1/8, Stamped: 1-2-3 / D8319.
JUST ADDED!
Bridgeport #Series-I, vertical knee mill, 9" x48" tbl., 1.5 HP, 30" X, 12" Y, 12" Z, 60-4200 RPM, R-8, chrome ways, Anilam digital read out
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Bridgeport
Model: SERIES-I
SERIAL.: 12-169300, MODEL.: SERIES I, AREA OF TABLE.: 48" X 9", SPINDLE SPEEDS.: 60 TO 4200 RPM, SPINDLE FEEDS.:.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL.: 30", CROSS TRAVEL.: 12", VERTICAL KNEE TRAVEL.: 16", QUILL TRAVEL.: 5", RAM TRAVEL.: 12", DEPTH OF THROAT.: 6-3/4" TO 18-3/4", TAPER IN SPINDLE.: R8, HEAD ...more
SIEMENS 8WD4408-0AD Stack Light White Amber Blue 24V Signal Tower USED
iGAM | Detroit, MI
Category: Lighting Fixtures and Lights
Seller: iGAM
Location: Detroit, MI
Mfr: Siemens
This listing is for a used Siemens 8WD4408-0AD stack light signal tower with 3 LED color modules installed., Configured with white, amber, and blue lights, this unit is designed for visual indication on automation systems or industrial machinery. Suitable for 24V AC/DC operation., Part No: 8WD4408-0AD, Series: 8WD4 ...more
75 HP 1800 RPM General Electric, Frame L365TP16, WPIBB, 230/460 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: General Electric
Frame: L365TP16
Stock #: 82990 Category: Vertical Motors HP: 75 RPM: 1785.00 Frame: L365TP16 Enclosure: WPIBB Make: Electric Volts: 230/460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
200 HP 900 RPM U.S. Motors, Frame 5008VP, WPIBB, 460 Volts, New Surplus
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: U.S. Motors
Frame: 5008VP
Stock #: 88307 Category: Vertical Motors HP: 200 RPM: 885.00 Frame: 5008VP Enclosure: WPIBB Make: US Motors Volts: 460 Service Factor: 1.15 Condition: New Surplus Location: Toledo, OH.
350 HP 1800 RPM General Electric, Frame L509TP20, WPIBB, 4000 Volts, New Surplus
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: General Electric
Frame: L509TP20
Stock #: 90275 Category: Vertical Motors HP: 350 RPM: 1785.00 Frame: L509TP20 Enclosure: WPIBB Make: Electric Volts: 4000 Service Factor: 1.15 Condition: New Surplus Location: Toledo, OH.
350 HP 1800 RPM Teco Westinghouse, Frame 447TP, WPIBB, 460 Volts, New Surplus
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: Teco Westinghouse
Frame: 447TP
Stock #: 90719 Category: Vertical Motors HP: 350 RPM: 1785.00 Frame: 447TP Enclosure: WPIBB Make: Teco Westinghouse Volts: 460 Service Factor: 1.15 Condition: New Surplus Location: Toledo, OH.
19" x 80" LeBlond #Regal, engine lathe, 13" swing over cross slide, inch/metric threads, 3-jaw 12" chuck, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 11E-304MODEL. REGALACTUAL SWING OVER BED. 19-1/2"SWING OVER CROSS SLIDE. 13"DISTANCE BETWEEN CENTERS. 78"HOLE THRU SPINDLE. 3-1/16"SPINDLE SPEEDS. (12) 40 TO 1600 RPMFEEDS (ENGLISH). (48).0018 TO.104 IPRTHREADS (ENGLISH). (48) 2 TO 112 TPITHREADS (METRIC). (35).3 TO 14 TPMMTHREAD DIAL. YESHARDENED REPLACEABLE ...more
Quick-Tech #T8-HY, hybrid 9" Axis twin spindle turn/mill center, Mitsubishi M830S Control, 19.7" swing, 2017
Universal Automatics | Richfield, OH
Category: CNC Lathes and Turning Centers
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Quick-Tech
Model: T8-HY
Year: 2017
Brand QUICK-TECH Model T8-HY ID # 631472 Type 5-Axis or More CNC Lathes Condition Used - Good Year 2017 Location United States, QUICK-TECH T8 HYBRID (GTYB) 9-Axis Twin Spindle Turn / Mill Center with Turret and B axis (used) New 2017 w/Combo turret and B-axis gang slide. The QuickTECH T8 HYBRID combines powerful main ...more
Milltronics #Partner-IV-Series-B, vertical machining center, 32" X, 16" Y, 5" Z, 4000 RPM, #40, Centurion IV, 13" x42" table, automatic lube, 1989
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Milltronics
Model: PARTNER-IV-SERIES-B
Year: 1989
Used Milltronics Partner IV. This pre-owned Vertical Machining Center is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Milltronics Vertical Machining Center we can review machine. To request a quote, inquire about rigging and trucking or ...more
17.1" x 44"/57" Republic-Lagun #ML-1740-G-TW American Turnmaster manual lathe
Equipment Hub | Stone Mountain, GA
Category: Engine Lathes
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Republic-Lagun
Model: ML-1740-G-TW
Stock #: Lagun-ML-1740/60-G-TW & Lagun-ML-2060-G-TWBrand: Republic LagunModel: ML-1740-G-TW & ML-2060-G-TW, Swing Over Bed: 17.12″ (435 mm) & 20″ (508 mm)Swing Over Cross Slide: 10.91″ (277 mm) & 13.90″ (353 mm)Distance Between Centers: 44″ (1,120 mm), 57″ (1,450 ...more
6" x 18" Parker #2Z, hand feed surface grinder, 7" x 5/8" x 1-1/4" wheel, power elevation, 2-Axis digital read out, PMC
Seminole Machinery Company | Rochester, MI
Seller: Seminole Machinery Company
Location: Rochester, MI
Mfr: Parker
Model: 2Z
Parker Majestic 2Z Hand Feed Surface Grinder Serial Number: 1983-SCM-67 : 6″ x 18″ Capacity Perm Magnetic Chuck 20″ Vertical Height From Centerline to Top of Table 7″ x 5/8″ x 1 1/4″ Wheel Size Power Elevation 2 Axis DRO.
Supermax #YC-1-1/2VS, vertical mill, 30" X, 10" Y, 5" Z, 12" ram, 9" x42" table, 2 HP, 60-4200 RPM, R8, Anilam Wizard 411 digital read out, 1 shot lube
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Supermax
Model: YC-1-1/2VS
SUPERMAX YC 1-1/2VS Vertical Mill # 7747 #1, Table Size: 9 x 42, Longitudinal Table Travel: 34, Cross Travel: 12, Vertical Knee Travel: 16, Ram Travel: 12, Spindle Speed: 60 4,200 RPM, Variable, Spindle Taper: R-8, Quill Travel: 5, (3) Quill Feeds:.0017,.0032,.0053 IPR, Head Tilt, Front to Back: 45, Head Swivel, Left ...more
1/4" Shuster, 12 roll, 2 plane tube & bar powered straightener, 4 HP, individual adjustment, exit feed rolls
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Shuster
ENTRY GUIDE, ENTRY FEED ROLLS. 2, VERTICAL ROLLS. 6, 3 OVER 3, INDIVIDUAL ADJUSTMENT, HORIZONTAL ROLLS. 6, 3 OVER 3, INDIVIDUAL ADJUSTMENT, EXIT FEED ROLLS, CONTROLS FWD/REV, VARIABLE SPEED, DRIVE MOTOR. 4 HP.
13.3" x 39.3" Republic-Lagun #AT-1340-G-TW, engine lathe, inch/metric threads
Equipment Hub | Stone Mountain, GA
Category: Engine Lathes
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Republic-Lagun
Model: AT-1340-G-TW
Stock #: Lagun-AT-1340-G-TWBrand: LagunModel: AT-1340-G-TW, Swing Over Bed: 13.39″Swing Over Cross Slide: 8.27″Distance Between Centers: 39.37″Length of Bed: 15.75″Spindle Speed RPM Range: 50-2570 RPMHole Through Spindle: 1.25″Spindle Nose: D1-4Motor HP: 5 HPQuill Diameter: ...more
32" x 120" Timemaster, gap bed engine lathe, 19-7/8" swing over cross slide, inch/metric, 4-jaw 23-3/4" chuck, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Timemaster
SERIAL. 96004SWING OVER BED. 32DISTANCE BETWEEN CENTERS. 120SWING IN GAP. 40GAP LENGTH. 8-1/2SWING OVER CROSS SLIDE. 19-7/8ENGLISH FEED. (72) 0.007 TO 1.52 IPRENGLISH THREAD. 1 TO 76 TPIMETRIC THREAD. 1 TO 240 MM PITCHSPINDLE SPEEDS. (18) 16 TO 900 RPMDIAMETER OF SPINDLE HOLE. 4-1/8CHUCKS. 23-3/4" 4-JAW, 12" 3 ...more
![6" wide, Stainless Steel Hopper w/ Belt Conveyor Frame [part], 55 cu.ft. capacity, 48" width x 54" L w/ 36"](https://files.surplusrecord.com/cdn-cgi/image/width=225,format=auto/listphotos/431882.jpeg)
6" wide, Stainless Steel Hopper w/ Belt Conveyor Frame [part], 55 cu.ft. capacity, 48" width x 54" L w/ 36" vertical side hopper
JM Industrial LLC | Millwood, WV
Category: Belt Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Stainless
Used Stainless Steel Hopper w/ Belt Conveyor Frame [PART], Stainless steel open top, 55 cubic foot capacity hopper, Hopper measures 48"W X 54"L with a 36" vertical side, formed with 11Ga. stainless steel sheet, Fill height of hopper: 73", Installed frame for belt conveyor (additional parts required) ...more
100 HP 1185 RPM Reliance, Frame 444LPH, TEFC, 1.15 service factor, 460 Volts
Pump & Motor Works | Okmulgee, OK
Category: Vertical Pump Motors
Seller: Pump & Motor Works
Location: Okmulgee, OK
Mfr: Reliance
Frame: 444LPH
12 Stand, Ardcor #SF, rollformer, 1-1/2" shaft diameter, 10" horizontal centers, 4.167" vertical centers, 5.5" horizontal centers, variable speed drive, 1961
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ardcor
Model: SF
Year: 1961
SERIAL. 513, MODEL. SF, YEAR. 1961, LEFT TO RIGHT. YES, STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 10", VERTICAL CENTERS. 4.167", ROLL SPACE. 5-1/2", BASE TO BOTTOM SPINDLE. 5-3/4", SPINDLE GEAR RATIO. EQUAL, VARIABLE SPEED DRIVE. YES, MOTOR. 15 HORSEPOWER.
16" x 48" Grand Rapids #670, mag.chuck, 1750-2100 RPM grind wheel, 7.5 HP, s/n 670121
N & R Machine Sales | Navasota, TX
Seller: N & R Machine Sales
Location: Navasota, TX
Mfr: Grand Rapids
Model: 670
Table Size 17-3/4" X 59-1/2", Magnetic Chuck Size 16" X 48", Longitudinal 59-1/2', Cross Travel 17-3/4', Vertical Movement Of Wheel Head 19", Vertical Working Height With 14" Wheel 18", Standard Size Grinding Wheel Low Speed 14"X 1-1/2" X 5", Grinding Wheel Speeds Low / High 1,750 To 2,100 Rpm's, Main ...more
Knuth #FPK4.2-FPK6.2, Tool Milling Machine
Blumberg Machinery Co | Bannockburn, IL
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: FPK4.2-FPK6.2
FPK 4.2FPK 6.2 Working Area Table dimensions 15x33 in 20x37 in Vertical table 10x35 in 12x49 in Table load capacity (max.) 550 lbs 660 lbs Slots (number/width/spacing) 0.2x0.55x2.48 in 0.28x0.55x2.48 in T-slots, vertical table (number x width x spacing) 0.12x0.55x2.48 in Travels Travel X-axis 16.5 in 23.6 in Travel ...more
Chevalier #FM-3VS, vertical mill, 3 HP, V-Speed, 9" x42"power feed table, digital read out
C.W. Wood Machinery Inc | Cincinnati, OH
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Chevalier
Model: FM-3VS
CHEVALIER VERTICAL MILLING MACHINE, MODEL: FM-3VS, SERIAL NUMBER: BM 843779, Table Size: 9" x 42", Longitudinal Travel: 24", Cross Travel: 12", Vertical Knee Travel: 16", Ram Travel: 12", Turret Rotation: 360 Degrees, Spindle Speeds, Infinitely Variable: 60 to 4200 RPM, Spindle Feeds: (3).0015",.003",.006", Spindle ...more
Induma #4SA, ram type vertical mill, 11" x58" table, 4 HP, #30 taper, #73329
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Induma
Model: 4SA
SERIAL. 870170, MODEL. 4SA, AREA OF TABLE. 58" X 11", SPINDLE SPEEDS. 80 TO 3600 RPM (VARIABLE), POWER LONGITUDINAL FEED. 3/4 TO 24 IPM, POWER CROSS FEED. 3/4 TO 24 IPM, LONGITUDINAL TRAVEL. 36", CROSS TRAVEL. 15", VERTICAL TRAVEL OF KNEE (POWERED). 16", QUILL TRAVEL. 5", QUILL FEEDS. 001 005 & 015 IPR, HORIZONTAL ...more
LeBlond lathe
Wenco Machinery Corp | Ringwood, NJ
Category: Engine Lathes
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Leblond
12 Stand, Ardcor #SF, rollformer, 1-1/2" shaft diameter, 10" horizontal centers, 4.167" vertical centers, 5.5" horizontal centers, variable speed drive, 1961
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ardcor
Model: SF
Year: 1961
SERIAL. 514, MODEL. SF, YEAR. 1961, RIGHT TO LEFT. YES, STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 10", VERTICAL CENTERS. 4.167", ROLL SPACE. 5-1/2", BASE TO BOTTOM SPINDLE. 5-3/4", SPINDLE GEAR RATIO. EQUAL, VARIABLE SPEED DRIVE. YES, MOTOR. 10.
14 Stand, Tishken #2-HMW-1-1/2, rollformer, 1.5" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace, air clutch, variable speed drive
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 2-HMW-1-1/2
SERIAL. 3251 332?, MODEL. 2-HMW-1-1/2, STANDS. 14, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2", AIR CLUTCH. YES, VARIABLE SPEED DRIVE. YES.
14 Stand, Tishken #2-HMW-1-1/2, rollformer, 1.5" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace, air clutch, variable speed drive
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 2-HMW-1-1/2
SERIAL. 16856-478 AND 13618-569, MODEL. 2-HMW-1-1/2, STANDS. 14, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2", AIR CLUTCH. YES, VARIABLE SPEED DRIVE. YES.
2600 gallon Vertical Stainless Steel tank, 7' diameter x 9' high, flat top
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 2,600 Gallon Vertical 304 Stainless Steel Tank, Capacity: 2,600 Gallon, Dimensions: 7' dia. x 9' straight side, Material of Construction: Stainless steel, Flat top, cone bottom, Mounted on legs, _UNKNOWN_ 2,600 GALLON, Capacity. 2,600 gal, Diameter. 7', Height. 9', Type of stainless. ...more
JUST ADDED!
15" x 54" LeBlond Makino, Servo Shift Engine Lathe, 9-1/2" swing over cross slide, 2-9/32" spindle hole diameter, 7.5 HP, 1200 RPM, 2-axis Nreall digital read out, 1992
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Year: 1992
SERIAL. 15C-576, MODEL. MAKINO L, NEW IN. 1992, SWING OVER WAYS. 15", SWING OVER CROSS SLIDE. 9-1/2", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. (12) 30 TO 1200 RPM, FEEDS. (48).0018 TO.01049 IPR, THREADS (INCH). 2 TO 112 TPI, THREADS (METRIC).25 TP 14 MM PITCH, TAPER ATTACHMENT. YES, DIAMETER OF SPINDLE HOLE. ...more
14" Starrett #HB350, comparator, 15.3" x5" table area, 10x lens, 8" horizontal/4" vertical travel, on stand
Yoder Machinery Sales | Holland, OH
Category: Optical Comparators
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Starrett
Model: HB350
SERIAL. 1256, MODEL. HB350, DIAMETER OF SCREEN. 14", AREA OF TABLE. 15.3" X 5", HORIZONTAL TRAVEL. 8", VERTICAL TRAVEL. 4", TABLE LOAD CAPACITY. 66 LBS, LENS. 10X, SCREEN MARKING CROSSLINES. 90 DEGREES, PROTRACTOR MARKINGS. 360 DEGREES, STARRET SCALES. HORIZONTAL & VERTICAL, PHASE. 1, VOLTAGE. 110, ON STAND. YES.
Steinel #SV4, vertical mill, 7.75" x24" tbl., 1.5 HP, 12" X, 6" Y, 11" Z, X-Axis power feed
Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Steinel
Model: SV4
STEINEL SV4 Vertical Milling Machine German #7709, STEINEL SV4 Vertical Milling Machine German #7709, Reference #7709, Model # SV4, Serial # 1360, Table size- 7-3/4” x 24”, X axis travel- 12”, Y axis travel- 6”, Vertical travel- 11”, Max distance spindle to table- 12”, Distance ...more
Euroturn #6-32-S, multi-spindle screw machine, 6 spindles, 32mm capacity, 480 V., spindle stopping, Siemens Control, rebuilt
Graff-Pinkert & Co | Oak Forest, IL
Category: Automatic Screw Machines and Chuckers
Seller: Graff-Pinkert & Co
Location: Oak Forest, IL
Mfr: Euroturn
Model: 6-32-S
Euroturn (ZPS Mori-Say) 6-32 rebuilt multi-spindle screw machine, SN: 224194-0451, 6 Spindles, 32mm Capacity, Voltage: 480v, With Spindle Stopping, Siemens Control System, Pickoff and Back Finish, Stock Reel Cover and Stand, Sedimentation Tank, Upgrade: Servo Feed Drive in place of main spindle drive, Upgrade: Repair ...more
18" x 36" Elb #SWB09VAII, surface grinder, wheel dresser, coolant, 1969
Scott Machinery & Supply Inc | Helena, AL
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
Mfr: Elb
Model: SWB09VAII
Year: 1969
Model: SWB09VAII, s/n: 79420269, Year: 1969, Made in Germany, Capacity: 18" x 36", Wheel: 16"d x 2"w x 5" bore, Distance from chuck to spindle: 24", Speeds: 3-82 ft/min, Automatic Cross feed continuous: 47 in/min, Automatic Cross feed intemittent: 0.04 - 2.4 in/stroke, Cross feed on handwheel: 0.001", Cross feed fine ...more
60 HP 1800 RPM General Electric, Frame K364TP16, TEFC BB, 230/460 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: General Electric
Frame: K364TP16
Stock #: 82982 Category: Vertical Motors HP: 60 RPM: 1765.00 Frame: K364TP16 Enclosure: TEFCBB Make: Electric Volts: 230/460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
75 HP 3600 RPM U.S. Motors, Frame 364VP, Drip-Proof Ball Bearing, 460 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: U.S. Motors
Frame: 364VP
Stock #: 87296 Category: Vertical Motors HP: 75 RPM: 3540.00 Frame: 364VP Enclosure: DPBB Make: US Motors Volts: 460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
36" 4-Jaw chuck
Belmont Machinery Co | Aurora, IL
Category: Lathe Chucks
Seller: Belmont Machinery Co
Location: Aurora, IL
39.5" 4-Jaw chuck
Belmont Machinery Co | Aurora, IL
Category: Lathe Chucks
Seller: Belmont Machinery Co
Location: Aurora, IL
46" 4-Jaw chuck
Belmont Machinery Co | Aurora, IL
Category: Lathe Chucks
Seller: Belmont Machinery Co
Location: Aurora, IL
10" 4-Jaw chuck
Yoder Machinery Sales | Holland, OH
Category: Lathe Chucks
Seller: Yoder Machinery Sales
Location: Holland, OH
JUST ADDED!
12" 6-jaw Chuck
G-2000 | Toledo, OH
Category: Lathe Chucks
Seller: G-2000
Location: Toledo, OH
Machine Type.Chucks Manufacturer.N/A Model.N/A Year.N/A Condition.Used.
JUST ADDED!
12" 3-jaw Chuck
G-2000 | Toledo, OH
Category: Lathe Chucks
Seller: G-2000
Location: Toledo, OH
Machine Type.Chucks Manufacturer.N/A Model.N/A Year.N/A Condition.Used.
18" 4-jaw chuck
Seminole Machinery Company | Rochester, MI
Category: Lathe Chucks
Seller: Seminole Machinery Company
Location: Rochester, MI
20" 4-Jaw chuck
Yoder Machinery Sales | Holland, OH
Category: Lathe Chucks
Seller: Yoder Machinery Sales
Location: Holland, OH
JUST ADDED!
7500 gallon Mueller, Stainless Steel Jacketed Vertical Tank, 122" diameter x 267" height, 25 psi @ 100°F vessel, 100 psi @ 100°F jacket
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Mueller
Used 7,500 Gallon (30,000 liter) 304 Stainless Steel tank, jacketed, cone bottom. Manufactured by Mueller. Model F. 10 2 5/16 OD x 22 3 1/2 Tall. Internal 25PSI@100F. Cooling Jacket 100PSI@100F. Dome top. #384634-2. 250. Previous use: Brewery Brite Beer Tank., MUELLER 7,500 GALLON, Capacity. 7,500 gal, Diameter. 122" ...more
12" x 24" Chevalier #FSG-2A1224H, 2-Axis Semi-Automatic Surface Grinder, 14" x 2" x 5" wheel, 16-82 FPM, 10 HP, 230/460 V., 1999
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Chevalier
Model: FSG-2A1224H
Year: 1999
Chevalier FSG-2A1224H 12” x 24”; High Precision 2-Axis Semi-Automatic Surface Grinder, Inventory # 7174-P, Model: FSG-2A1224H, S/n: P2883001 “1999”, Table size: 12” x 24”, Max. Distance from Table to Spindle: 24 3/4″, Magnetic Chuck Size: 24″ x 12″, Longitudinal ...more
4100 gallon Best Mfg. Co., Stainless Steel Vertical Tank, 7' diameter x 12' Straight Side, 50 psi @ 200°F Internal, Dish Top and Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Best
Used Approximately 4,100 Gallon Stainless Steel Pressure Vessel, Manufacturer: Best Mfg. Co., Capacity: 4,100 gallons, Internal pressure: 50 psi @ 200F, Dimensions: 74" dia. x 12' straight side, Dish top, dish bottom, Material of construction: 304 stainless steel, Additional information: 0.1875" shell thickness ...more
Clansman #C2100, Rail-Bound Forging Manipulator, 6 Axes of Movement, 270 deg. Cab Rotation, 1500 kg Lift capacity, 70.9" Vert. & 102.4" Horz. Arm length, 460 VAC, 2014
Prestige Equipment Corp | Melville, NY
Category: Forging Manipulators
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Clansman
Year: 2014
Lifting Capacity: 1500 kg, Vertical Arm Length: 1800 mm, Horizontal Arm Length: 2600 mm, Speeds: 60 deg/s Slew, Vertical Travel Speed: 1.0 m/s, Horizontal Travel Speed: 0.8 m/s, Gripper Size: 0-750 mm, Approximate Weight: 48,000 Lbs., 6 Axes of Movement, 270 Degree Cab Rotation, 400L Hydraulic Tank, 460VAC,3PH, 60Hz ...more
Tos #4, horizontal mill, 17-3/4" x78-1/2" table, 20 HP, #50 NS, coolant, 1981, #5200
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tos
Model: 4
Year: 1981
SERIAL #26459, MODEL #FA5B-H, NEW IN 1981, WORKING SURFACE OF TABLE. 78-1/2" X 17-3/4", SPINDLE SPEEDS. (20) 18 TO 1400 RPM, LONGITUDINAL AND CROSS FEEDS. (15) 15/32 TO 58 IPM, VERTICAL FEEDS.1 TO 12.4 IPM, LONGITUDINAL TABLE TRAVEL. 54", CROSS TABLE TRAVEL. 18", VERTICAL TRAVEL. 18", RAPID TRAVERSE. 126 IPM (1.5 ...more
DeVlieg #4K-72, Very Excellent Cond, 4" Bar, 60" Vert Travel,
Industrial Machinery NJ, LLC | Livonia, MI
Category: Boring Mills, Horizontal, Table Type
Seller: Industrial Machinery NJ, LLC
Location: Livonia, MI
Mfr: Devlieg
Model: 4K-72
DeVlieg Model 4K-72, Very Excellent Cond, 4” Bar, 60” Vert Travel, 3- Axis Digital Readout, 1450 RPM, Late Model, Factory Extra Large 55” x 72 Table and Factory Extra, Large Diameter Table Screw.
Blanchard #11A-20, 20" mag chuck, PLC Control, remanufactured, 1 year warranty, 1997, #17161
F P Miller Company | Jackson, MI
Seller: F P Miller Company
Location: Jackson, MI
Mfr: Blanchard
Model: 11A-20
Year: 1997
Chuck Dia.: 20 inches Spindle (Horz/Vert): vertical Power: 15 horsepower Swing: No Attached inches Under Wheel: No Attached inches Table Speeds: No Attached Grinding Wheel Width: No Attached inches Table Motor Horsepower: No Attached horsepower Grinding Wheel Dia.: No Attached inches CNC Control: yes Type of CNC ...more
Morbidelli #N-100, flat table machine, 5' x12'tbl., 166.54" X, 78.15" Y, 9.84" Z, 24k RPM, 14 ATC, boring, 2017
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Morbidelli
Model: N-100
Year: 2017
MORBIDELLI - N 100 15: Flat Table Machine with ATC, Boring, Rake -- : 5' x 12' Worktable 13 HP (S6) air cooled electro spindle with HSK F 63 quick release tool holder 1,500 to 24,000 RPM inverter-controlled spindle speed Aluminum solid worktable that can nest full sheets or be used for routing smaller ...more
Stainless Steel Jacketed portable reactor
JM Industrial LLC | Millwood, WV
Category: Reactors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 316L Stainless Steel Jacketed Portable Reactor Holding Tank - 500L Capacity, National Board Certified by Stainless Technology (NB #130), Tank has a 34" internal diameter and a 33" vertical straight side., Top dished cover is multi-ported and installed with a 24KW imersion heater., Cover is missing the ...more
340 gallon 110 psi/FV, 36" diameter x 76" T/T, Continental Boiler, Carbon Steel Vessel, 500°F, internal Coils for heating/cooling
EcReCon Inc. | Pedericktown, NJ
Category: Pressurized Carbon Steel Tanks
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Continental
Year: 1975
, 340 Gallon Carbon Steel vessel. Length measurement shown is T/T. Mounted on (4) legs. Unit has Internal Coils for heating/cooling., 1975 CONTINENTAL BOILER., Gallons. 340 gal, PSIG. 110/FV, ID - Inches. 36 in, Length. 6' 4, Temp (F). 500, Material. Carbon Steel, Vert/Horiz. V.
5 gallon LEDCO Vessel & Exchanger Inc., 316L Stainless Steel Vessel, 100 psi @ 392°F, 10" ID x 12" T/T
EcReCon Inc. | Pedericktown, NJ
Category: Stainless Steel Tanks and Vessels
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Ledco
Year: 1998
, Approx. 5 gallon 316L Stainless Steel vessel. Rated 100 PSI @ 200 degC (392 degF)., 1998 LEDCO VESSEL & EXCHANGER INC., Gallons. 5 gal, PSIG. 100, ID - Inches. 10 in, Length. 12" T/T, Temp (F). 392, Material. 316L Stainless Steel (316L SS), Vert/Horiz. V.
Southwestern Industries #Trak-KE, vertical mill, 10" x50" tbl., 3 HP, 30" X, 15" Y, 15" Z, 70-3900 RPM, 3-Axis digital read out, R-8, air power draw bar, ProtoTrak EMX controller
Sterling Machinery Exchange | South El Monte, CA
Category: CNC Vertical Bed Mills
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Southwestern Industries
Model: TRAK-KE
Spindle Taper R8 Ram Travel 15" Vertical Knee Travel 15" Feed Rate.006",.0015",.003" Quill Travel 5" Distance From Table To Spindle 3" - 18" Cross Travel 15" Longitudinal Travel 30" Table Size 10" x 50" Dimension (L x D x H) 68" x 62" x 86" Spindle Speed 70 - 3,900 RPM WEIGHT 2,300 LBS Voltage 220v/440v 3 Phase Speed ...more
4000 lb. Southworth #LS4-36, hydraulic lift table, 42" x 48" platform, 7" lowered, 42" raised, 36" vertical travel, electric foot pedal
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Lift Tables
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Southworth
SOUTHWORTH HYDRAULIC LIFT TABLE, MODEL: LS4-36, SERIAL NUMBER: 39690B, Capacity: 4000 Lbs., Platform Size: 42" x 48", Vertical Travel: 36", Height, Lowered: 6-3/4", Height, Raised: 42-3/4", 1 HP Motor, 115/60/1, Electric Foot Pedal Operation, Approximate Weight: 650 Lbs., F.O.B. Cincinnati, Ohio, ALL SUBJECT TO ...more
150 HP 1800 RPM U.S. Motors, Frame 447TP, TEFC BB, 460 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Henderson, NV
Mfr: U.S. Motors
Frame: 447TP
Stock #: H0338 Category: Vertical Motors HP: 150 RPM: 1780.00 Frame: 447TP Enclosure: TEFCBB Make: US Motors Volts: 460 Service Factor: 1.15 Condition: Electrically O.K. Location: Henderson, NV.
250 HP 1800 RPM U.S. Motors, Frame 449VP, TEFC BB, 2300 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: U.S. Motors
Frame: 449VP
Stock #: 72661 Category: Vertical Motors HP: 250 RPM: 1785.00 Frame: 449VP Enclosure: TEFCBB Make: US Motors Volts: 2300 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
350 HP 3600 RPM General Electric, Frame 6319P20, TEFC BB, 4160 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: General Electric
Frame: 6319P20
Stock #: 85266 Category: Vertical Motors HP: 350 RPM: 3570.00 Frame: 6319P20 Enclosure: TEFCBB Make: Electric Volts: 4160 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
14 Stand, Roll Space #WB-14, rafter rollformer, 3" spindle diameter, 1/2" keyways, 15" roll space, 13" horizontal centers, 6.75"-8.25" vertical adj., 46" passline, rebuilt 2018
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Model: WB-14
14 STAND X 3" RAFTER ROLLFORMER: STOCK 16839 SERIAL. 4238-98 NEW. 1998 REBUILT. 2018 Model. WB-14 STANDS. 14 SPINDLE DIAMETER. 3" KEYWAYS. 1/2" ROLL SPACE. 15” HORIZONTAL CENTER. 13” BASE TO BOTTOM. 6” VERTICAL ADJUSTMENT. 6.75" TO 8.2510” GEARING. EQUAL ...more
Cincinnati #2M, horizontal mill w/vertical head, 10-1/2" x53" table, 5 HP, #50 taper, #77029
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: -2ML
SERIAL. E712Z, MODEL. 2M, AREA OF TABLE. 53" X 10-1/2", SPINDLE SPEEDS. 20 TO 417 RPM, LONGITUDINAL & CROSS FEEDS.5 TO 20 IPM, LONGITUDINAL TRAVEL. 24", CROSS TRAVEL. 10", VERTICAL KNEE TRAVEL. 13", TAPER IN SPINDLE. #50, COOLANT. YES, VERTICAL HEAD ATTACHEMENT. YES, MAIN MOTOR. 5 HORSEPOWER.
6" Giddings & Lewis #65-H6-T, horizontal boring mill, 60" x120" table, #50 taper, 108" cross, 144" saddle, 72" vert travels
Tom Hale Equipment Co. Inc | Crossville, TN
Category: Boring Mills, Horizontal, Table Type
Seller: Tom Hale Equipment Co. Inc
Location: Crossville, TN
Mfr: Giddings & Lewis
Model: 65-H6-T
6 Inch G&L Horizontal Boring Mill, Model 65-H6-T, New in 1965, 50 Taper, 60 X 120 Table, Cross Travel 108 Inches, Saddle Travel 144 Inches, Vertical Travel 72 Inches, Pendant Control, $129,500.00 Checked Out & Loaded Out, Tom Hale Equipment Company, Inc., Best source of Horizontal Boring Mills, Since 1981 ...more
5600 gallon Stainless steel tank, 108" dia. x 108" straight side, dished top & bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 5,600 Gallon Stainless Steel Tank, Capacity: 5,600 gallons, Dimensions: 108" dia. X 108" straight side, Dished top, dished bottom, Mounted on skirt, _UNKNOWN_ 5,000 GALLON, Capacity. 5,600 gal, Diameter. 9', Height. 9', Type Of Heads. Dished, Vertical/Horizontal. Vertical, Type of stainless. ...more
Mattison #24, Grinder 75 HP, 1980s
Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Mattison
Model: 24
Year: 1980
Make: Mattison, Model: 24, Year: 1980, Machine Location: Arkansas, Catalog :, Magnetic Chuck Diameter 42″ over.5 thick magnet, Swing Inside Coolant Guards: 48″, Vertical Capacity: 24″, Chuck Rotation Variable Speed: 6-28 RPM, Grinding Wheel Size: 24″, Grinding Wheel Speed: 705 RPM, Feed Rate ...more
21" x 98.5" Tarnow #TUJ-48X2500, Engine Lathe, 1120 RPM, inch/metric threads, 2" bore, 220 V.
Wheeler Machinery Sales | Pomona, CA
Category: Engine Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Tarnow
Model: TUJ-48X2500
TARNOW TUJ 48 X 2500 Engine Lathe #8067 #2, 21" SWING, 98.5" CENTERS, 13-1/4" SWING OVER CROSS, 16 SPINDLE SPEEDS 22.4-1120 RPM, 35 INCH THREAD CHANGES 1-28 TPI, 38 METRIC THREAD CHANGES.4-28 MM, 22 FEED CHANGES.0036- IPR, GAP BED, D1-6 CAMLOCK SPINDLE, CLUTCHED HEAD, 2" SPINDLE BORE, 3 JAW CHUCK, TAPER ATTACHMENT, 6 ...more
20" x 78" Angle Plates, (3) Vert T-Slots, (7) Horiz T-Slots (2 available)
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Angle Plates
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
ONE PAIR ANGLE PLATES, Width: 20", Height: 78", Horizontal T-Slots: 7, Vertical T-Slots: 2, Base: 20" x 27" F-B, Thickness Of Base: 4", Approximate Weight: 3300 Lbs. Each, F.O.B. Cincinnati, Ohio, ALL SUBJECT TO VERIFICATION BY PURCHASER.
16" x 32" Sharp #SH-1632, automatic, 5 HP, 1720 RPM, extra wide bed, 14" x1.5" x5" whl.
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: SH-1632
16” X 32” Capacity Automatic Surface Grinder with 2-axes Auto, or 3-axes Auto with downfeed control option, 5HP Motor, Spindle Speed 1,720 RPM, 2-V Ways, Extra Wide Bed, Double Longitudinal “V” Ways and Cross “V” Ways, Hydraulic Table (with Over Travel Protection), Auto Crossfeed ...more
