AM Industrial
Brook Park, OH 44142
Platinum Level Dealer
Surplus Record Dealer Since 2006
Contact
Brett Wyman
About
AM Industrial Group, LLC is a leading supplier of used industrial machinery and equipment, specializing in the world’s largest selection of tube machinery and industrial dust collection systems. Originally founded in 1991 as Allset Machine, AM Industrial has grown to become a trusted name in the industry. With decades of experience and one of the most extensive inventories in the market, we offer customized solutions tailored to each customer’s unique operational needs.Products & Services
- Benders, Bar, Pipe, Tube
- Blowers & Fans
- Foundry Equipment
- Polishing Machinery & Plating Equipment
- Robots
- Saws
- Tube Machinery & Mills
- Welding Equipment
Associations & Affiliations
299 listings in 48 categories
60 Hz Three Phase Transformers
4 Results
1630 KVA 4160 Delta Primary, 665 Delta Secondary, General Elecric transformer, 1995
Category: 60 Hz Three Phase Transformers
Seller: AM Industrial
Location: Warren, OH
Mfr: General Elecric
Year: 1995
Electric 1630 KVA Transformer, KVA- 1630, High Voltage- 4160 Delta, Low Voltage- 665 Delta, Serial #- 53369, Mfg. Date- 1/95.
1630 KVA 23000 Delta Primary, 576 Delta Secondary, Solomon Corp. transformer, 2016
Category: 60 Hz Three Phase Transformers
Seller: AM Industrial
Location: Warren, OH
Mfr: Solomon
Year: 2016
Solomon Corp. 1630 KVA Transformer, KVA- 1630, HV- 23000 Delta, LV- 576 Delta, Phase- 3, Date of Mfg.- 2016.
1630 KVA 23000 Delta Primary, 576/333 Secondary, Solomon Corp. transformer, 2016
Category: 60 Hz Three Phase Transformers
Seller: AM Industrial
Location: Warren, OH
Mfr: Solomon
Year: 2016
Solomon Corp. 1630 KVA Transformer, KVA- 1630, HV- 23000 Delta, LV- 576/333, Phase- 3, Date of Mfg.- 2016.
2500 KVA 23000 Delta Primary, 480 Delta Secondary, Solomon Corp. transformer
Category: 60 Hz Three Phase Transformers
Seller: AM Industrial
Location: Warren, OH
Mfr: Solomon
Solomon Corp 2500 KVA Transformer, Primary Volts- 23000 Delta, Secondary- 480 Delta, Serial- 165223, Job#- 245188.
Air Cooled Condensers
2 Results
AAON #RNA-040-3-0-EA09-1BA, Central HVAC Unit
Category: Air Cooled Condensers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Aaon
Model: RNA-040-3-0-EA09-1BA
AAON RNA-040-3-0-EA09-1BA Central HVAC Unit, Model: RNA-040-3-0-EA09-1BA, Serial Number: 201612-BNEV14970, 40-ton cooling capacity 3-phase power Max Overcurrent Prot. 200 Min Circuit Ampacity: 267.
AAON #RNA-090-E-0-3-CAA-OA-CB3LO, Central HVAC Unit
Category: Air Cooled Condensers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Aaon
Model: RNA-090-E-0-3-CAA-OA-CB3LO
AAON RNA-090-E-0-3-CAA-OA-CB3LO Central HVAC Unit, Model: RNA-090-E-0-3-CAA-OA-CB3LO, Serial: 202306-AVGGO1665, 90 Ton Capacity 3 Phase Min Circuit Ampacty 198 AMP MAX. Overcurrent Prot: 225 Min/Max 456/504.
Bed and Knee Milling Machines - Vertical
1 Result
Serr Serr Mac #TCS-40, Milling Machine, 10" x32" table, Elbo digital read out, 1998
Seller: AM Industrial
Location: Warren, OH
Mfr: Serr Mac
Model: TCS-40
Year: 1998
Serr Mac Milling Machine, Model- TCS 40, Serial- 985107, Yr. of Mfr.- 1998, 10X32 Table, Elbo Digital readout.
G & P G & P #132-2HD, Abrasive Belt Grinder
Category: Belt Grinders
Seller: AM Industrial
Location: Warren, OH
Mfr: G&p
Model: 132-2 HD
G&P 132-2 HD Abrasive Belt Grinder-AM24697, Model: 132-2 HD Serial: G-6922, Belt Speed: 5500 SFPM Totally Enclosed Motor Voltage: 208-230-460V, 3-phase, 60 Hz.
Carbide, Friction and Cold Saws
5 Results
Kaltenbach #KKS-400, Automatic Cold Saw
Category: Carbide, Friction and Cold Saws
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Kaltenbach
Model: KKS-400
Kaltenbach 15-3/4" (400mm) Fully-Automatic Cold Saw - Used - AM23259, Model: KKS400, Serial: 104686, Capacities:, Hydraulic up-stroking blade: 15-3/4" (400mm) Round: 5" @ 90° & 45° Square: 4-3/4" @ 90° & 1-3/8" @ 45° Rectangle: 7" x 4" @ 90°, Designed for high production & high ...more
Ohler Remscher #630, dual column circular cold saw, adjustable speed, clamping, used
Category: Carbide, Friction and Cold Saws
Seller: AM Industrial
Location: Warren, OH
Mfr: Ohler
Model: 630
Ohler Remscher Dual Column Circular Cold Saw – Used – AM21553, Model: 630, Serial: 5586, Year: 1958, Rigid frame construction Carbide / Alloy / High Speed Steels Adjustable speed Clamping Cutting: round/square, Electrical:, 440-V, 3-Ph, 60-Hz.
Scotchman #CPO315HT/RFA
Category: Carbide, Friction and Cold Saws
Seller: AM Industrial
Location: Warren, OH
Mfr: Scotchman
Model: CPO315HT/RFA
Scotchman Industries Production Saw, Model- 315HT/REA, Serial- 101ARFA0597, Electrics- 230V/60Hz/3ph, - Feed rack.
Sinico Sin-O-Matic #TOP2000, twin spindle CNC cutting machine
Category: Carbide, Friction and Cold Saws
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Sinico
Model: TOP2000
Sinico Sin-O-Matic TOP2000 Twin Spindle CNC Cutting Machine, Call for Price.
Sinico Sin-O-Matic #TOP2000, twin spindle CNC cutting machine, 2004
Category: Carbide, Friction and Cold Saws
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Sinico
Model: TOP2000
Year: 2004
SINICO TOP2000CSV Twin Opposed Spindle Milling, Drillingand Cut to Length System - Used - AM20999, Model: Sin-O-Matic TOP2000, New in 2004!, Maximum Capacity: 65 mm, Minimum Capacity: 12 mm, Maximum cut length: 340 mm, Minimum cut length: 15 mm, Accuracy of cut: +/- 0.025", Raw material infeed length: 25' ...more
Chip Processing Systems
1 Result
Oberlin Fully Automatic Pressure Filter Chip Processing System
Category: Chip Processing Systems
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Oberlin
Model: OPF-7
OBERLIN Fully Automatic Pressure Filter Chip Processing System - Used - AM22056, Model: OPF-07, Serial: 219 MD, Rate for up to: 280 gallons per minute Equally effective on oil, water and synthetic coolants Media Area: 7 ft² Extends coolant life 5 to 10 times by removing 90% solids by weight Accepts standard roll ...more
24" Prab #24AD, Chip Wringer System, 15 HP
Category: Chip Wringers
Seller: AM Industrial
Location: Warren, OH
Mfr: Prab
Model: 24AD
PRAB automatic continuous chip wringer system — used —, Model: 24AD, 24” Air Discharge Diagonal Shaft Wringer Wet chips enter wringer through the conveyor Straight-line feed for minimal jamming Rotating bowl moves chips through the bowl liner Fluids are extracted through the bar screen with paddles ...more
24" Prab #24AD, Chip Wringer System, 15 HP
Category: Chip Wringers
Seller: AM Industrial
Location: Warren, OH
Mfr: Prab
Model: 24AD
PRAB automatic continuous chip wringer system — used —, Model: 24AD, 24” Air Discharge Diagonal Shaft Wringer Wet chips enter wringer through the conveyor Straight-line feed for minimal jamming Rotating bowl moves chips through the bowl liner Fluids are extracted through the bar screen with paddles ...more
Bancroft Miller Vertical Rotary Welder
Category: Circle Welders
Seller: AM Industrial
Location: Warren, OH
Mfr: Nash
High-performance automated welding system engineered for precision, repeatability, and efficiency. Designed to weld circular or contoured components, this vertical rotary system is ideal for applications requiring consistent, high-quality welds on fittings, headers, ports., s Include: 360 Torch Rotation and Digital ...more
CNC Bar, Pipe and Tube Benders
24 Results
1/2" Eaton Leonard #VR12, CNC tube bender, right hand/left hand bending rotation
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eaton Leonard
Model: VR12
Product, Stock Number AM20231 Brand Eaton Leonard Capacity 0.50 inches, 1/2″ Eaton Leonard #VR12 CNC Tube Bender, Capacity: 1/2″Right hand/left hand bending rotationLight speed controls systemMulti-stack toolingRoll bending for large radiusGreat for brake lines, HVAC coils, etc.
5/8" Eaton Leonard #VB50HP, CNC horiz.mandrel type tube bender,.620" OD x .083" WT
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eaton Leonard
Model: VB50HP
Product, Stock Number AM18286 Brand Eaton Leonard Capacity 0.63 inches, 5/8″ Eaton Leonard #VB50HP 3-Axis CNC horizontal mandrel type tube bending machine, Maximum tube diameter: 0.625″ OD x 0.083″ WT (mild steel)Maximum bend radius: 6″ (approx)Maximum tube length over mandrel: 82″Bending ...more
1-1/4" Eagle #EPT40DR, CNC tube bender, 1-1/4" OD x .140" wall, 180° +springback, counter clock wise
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: EPT40DR
Product, Stock Number AM18025 Brand Eagle Capacity 1.25 inches, 1.25″ Eagle #EPT-40DR 3-Axis CNC horizontal mandrel type tube bending machine, Tube capacity: 1.25″ OD x 0.14″ WT (mild steel)Maximum centerline radius: 11″Maximum rotation: 180 degrees + springbackMaximum tube length over mandrel: ...more
1.25" Miic #MC-30, CNC tube bender
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Miic
Model: MC-30
Product, Stock Number AM22206 Brand Miic Capacity 1.25 inches, 1.25” Miic MC-30 CNC Tube Bender, MIIC 3-Axis CNC 2-Stack horizontal mandrel type tube bending machineModel: MC-30Capacities:, Maximum tube diameter: 1.25” ODMaximum bending degree: 180° + springbackMulti-Radius bending – double stack ...more
1-1/4" Miic #MC-30, CNC 2-Stack horizontal mandrel type tube bender, 3-Axis, pedestal Control
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Miic
Model: MC-30
Product, Stock Number AM21952 Brand Miic Capacity 1.25 inches, 1.25” cfm Miic MC-30 CNC Tube Bender, MiiC 3-Axis CNC 2-Stack horizontal mandrel type tube bending machineModel: MC-30Capacities:, Maximum tube diameter: 1.25” ODMaximum bending degree: 180° + springbackMulti-Radius bending – double ...more
1-1/4" UTE #R-EL-150, CNC tube bender
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Ute
Model: R-EL-150
Product, Stock Number AM22237 Brand Eaton Leonard Capacity 1.50 inches, 1.500″ UTE R-EL-150 CNC Tube Bender, EATON LEONARD/UTE CNC horizontal 3-Axis tube bending machine-used-Model: R-EL-150 Serial: 5446-5061:, Maximum tube diameter: 1.50″ ODMinimum tube diameter: 1/4″ODMaximum centerline radius: ...more
1-1/2" Addison McKee #PB-42ST2, CNC tube bender
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: PB-42ST2
Product, Stock Number AM20842 Brand Addison McKee Capacity 1.50 inches, Addison McKee 5-Axis CNC high production horizontal tube bending machine, Model: PB-42ST2Maximum tube diameter: 1-1/2” (40mm) OD x.078” (2mm)Maximum bend radius: 180° + springbackMaximum bend centerline radius: 8” (200mm)Bend ...more
1.5" Eaton Leonard / SMT #VB150 CNC tube bender, updated controls
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eaton Leonard
Model: VB150
Product, Stock Number AM22453 Brand Eaton Leonard Capacity 1.50 inches, Eaton Leonard / SMT #VB150 CNC tube bender, EATON LEONARD 3-Axis CNC tube bender–used–Model: VB150:, Maximum tube diameter: 1-1/2” OD x.140 WTMinimum tube diameter: 1/8″ODMaximum degree of bend: 180° + spring ...more
1.75" Eagle Eaton Leonard #VB45-HT-RH, 3 stack 5-Axis horizontal mandrel CNC tube bender
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eaton Leonard
Model: VB45-HT-RH
1.75″ Eagle Eaton Leonard #VB45-HT-RH Mandrel CNC Tube Bender, EAGLE EATON LEONARD 3-Stack 5-Axis CNC horizontal mandrel type tube bending machine-Recontrolled Model: VB45-HT-RH Serial: VB045HTRH224IO5EPT0999 Capacities:, Maximum bending capacity: 1.750” OD Minimum tube OD: 1/4″ Maximum rotation: ...more
2" Alpine Alpine #CNC50HD, CNC Tube Bender
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Alpine
Model: CNC50HD
2″ Alpine AB CNC50HD CNC Tube Bender, Alpine CNC 5 axis horizontal mandrel tube bending machine Used Model: AB CNC50HD Capacities:, Minimum tube diameter:.125” OD Maximum tube diameter: 2.0” OD x 0.140” wall (Mild Steel) Maximum degree of bend: 180° + springback Maximum bend centerline ...more
2" MIIC #MS-50RL, 5-Axis CNC horizontal mandrel type tube bender, refurbished
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Miic
Model: MS-50RL
2″ Miic MS-50RL CNC Tube Bender, Miic 5-Axis CNC horizontal mandrel type tube bending machine Refurbished Model: MS-50RL Serial: B0334U Capacities:, Maximum tube diameter: 2″ OD x.120″ wall (Mild Steel) Maximum bend radius: 180° + springback Maximum bend centerline radius: 8″ (approx) ...more
2.55" Horn #CNC65TBRE, CNC tube bender
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Model: CNC65TBRE
Product, Stock Number AM22408 Brand Horn Machine Tools Capacity 2.50 inches, 2.5” Horn #CNC65TBRE Tube Bender, HORN MACHINE TOOLS CNC 5-Axis heavy duty tube bending machine-used-Model: CNC65TBRE Serial: 044113Capacities:, Maximum Bending Capacity (per mfg. literature):Round tube (non-ferrous): 2.50″ OD ...more
3" Addison McKee #DB76, CNC horizontal tube bender, BendPro Control, wiper die holder
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: DB76
Product, Stock Number AM20932 Brand Addison McKee Capacity 3.00 inches, 3″ Addison McKee DB76 CNC Tube Bender, Addison McKee CNC horizontal tube bending machine RecontroledModel: DB-76Serial: 10049Capacities:, Maximum bending capacity: 3” OD x 0.118″ WTMinimum bending capacity: 1/2″ ODMaximum ...more
3" Addison McKee, CNC horizontal tube bender, clock wise rotation, BendPro G2 Control
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Product, Stock Number AM22126 Capacity 3.00 inches, Addison 3″ CNC Tube Bender, ADDISON McKEE CNC horizontal tube bending machine–used–Capacities:, Maximum bending capacity: 3” ODMinimum capacity: 1/2″ (aprox.)Maximum bend centerline radius: 12”Maximum tube length over mandrel: ...more
3" Eaton Leonard #VB300-MP, 3-Axis CNC tube bender, Eaton Leonard Premier Control, counter clock wise
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eaton Leonard
Model: VB300 MP
3” Eaton Leonard #VB300 MP 3-Axis CNC tube bender, Maximum tube diameter: 3″ OD Maximum degree of bend: 180 degrees + springback Maximum tube length over mandrel: 132” (approx) Bending rotation: left-hand (counter-clockwise) Eaton Leonard Premier CNC control system Hydraulic mandrel extractor ...more
3" Horn Machine Tools #2L, CNC tube bender
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Horn
Model: 2LCNC
3″ Horn Machine Tools 2L CNC Tube Bender, Horn Machine Tools Horizontal CNC 3-Axis Heavy Duty Mandrel Type Tube Bending Machine Model: 2LCNC :, Maximum bending capacity: Round Tube: 3” OD Square Tube: 2” OD Steel Pipe (Schedule 80): 2” IPS Maximum tube length over mandrel: 168” (approx.) ...more
3" Horn #80TMRE-RBE, CNC tube bender, mandrel extractor, carriage boost, BendPro G2, stack tooling & cutoff option, 2011
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Horn
Model: 80TMRE-RBE
Year: 2011
Product, Stock Number AM20739 Brand Horn Machine Tools Capacity 3.15 inches, Horn Machine Tools CNC 5-Axis heavy duty hybrid boost type tube bending machine, Model: CNC 80 TMRE-RBENew in 2011!Maximum Bending Capacity (per mfg. literature):Round tube (mild steel): 3.150″ OD x.098″ WTRound tube ...more
3-1/4" Schwarze-Robitec #80-HD, CNC tube bender, hydraulic mandrel extractor, automatic lube
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Schwarze-Robitec
Model: 80-HD
Product, Stock Number AM17919 Brand Schwarze Wirtz Robitec Capacity 3.25 inches, 3-1/2″ Schwarze-Robitec CNC #80 HD mandrel type CNC tube bender, Maximum tube diameter: 3-1/2″ ODMaximum degree of bend: 180 degrees + spring backSchwarze-Robitec CNC operator control – PC basedBending rotation: right ...more
3-1/2" Addison McKee #DB-89CBE, CNC tube bender, mandrel, servo shift, 2008
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: DB-89CBE
Year: 2008
Product, Stock Number AM19610 Brand Addison McKee Capacity 3.50 inches, 3-1/2” Addison McKee #DB-89CBE CNC tube bender with cutoff, Electric bend headBoost carriageRH rotation3 stack shift with cutoff option *2-stacks+shear stack or 3 stacks no shearMandrelServo shiftNew in 2008.
3.5" Addison McKee #DB89 CNC Tube Bender
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: DB89
Product, Stock Number AM22636 Brand Addison McKee Capacity 3.50 inches, 3.5″ Addison McKee DB89 CNC Tube Bender, ADDISON MCKEE 3-Axis CNC horizontal mandrel tube bending machine–Recontroled–AM22636Model: DB-89Recontroled in 2023:, Maximum bending capacity: 3-1/2” OD x.220” WT (Mild ...more
3-1/2" Eagle #EPT-90, CNC tube bender, refurbished
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eagle
Model: EPT-90
Product, Stock Number AM22416 Brand Eagle Capacity 3.50 inches, 3.5″ Eagle EPT-90 CNC Tube Bender, 3-1/2″ Eagle EPT 90 CNC tube bender with NEW BendProG2 controls.
4" Alpine #AB100HD, 5-Axis CNC horizontal mandrel tube bender, clock wise
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Alpine
Model: AB100HD
4″ Alpine AB100HD CNC Tube Bender, Alpine CNC 5 Axis horizontal mandrel tube bending machine Used Model: AB CNC100HDL Capacities:, Minimum tube diameter:.375” OD Maximum tube diameter: 4.0” OD x 0.140” wall (Mild Steel) Maximum degree of bend: 180° + springback Maximum bend centerline ...more
5" Eagle #EPT-125XPE, 7-Axis CNC hybrid tube bender, counter clock wise, BendPro G2V2, hydraulic mandrel extractor
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eagle
Model: EPT-125XPE
5″ Eagle EPT125 CNC Tube Bender, Eagle 7-Axis CNC Hybrid Mandrel Tube Bender Used Model: EPT-125 XPE :, Minimum tube diameter: 1″ (approx.) Maximum tube diameter: 5″ (127mm) OD 4-Stack tooling capacity (Servo-Hydraulic) Maximum degree of bend: 180° + springback Maximum length over mandrel: ...more
8.625" Schwarze #WE220, CNC bender,.280" WT, hydraulic, updated operator control station, clock wise
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Schwarze
Model: WE220
Product, Stock Number AM17371 Brand Schwarze Wirtz Robitec Capacity 8.63 inches, 8-5/8″ Schwarze-Robitec #WE220 3-Axis CNC Tube Bender, Maximum tube diameter: 8.625″ OD x 0.280″ wall (219.1mm x 7.1mm)Maximum tube length over mandrel: 236” or 6,000 mm (approx)Maximum centerline radius mandrel ...more
Clausing #Colchester-Series lathe, 15" swing, 8" swing over cross slide, 30" centers, 1.5" spindle bore
Category: CNC Lathes and Turning Centers
Seller: AM Industrial
Location: Warren, OH
Mfr: Clausing
Model: COLCHESTER SERIES
Clausing Colchester Lathe-AM24635, Model: Colchester Series, Swing Over Bed: 15" Swing Over Cross Slide: 8" Distance Between Centers: 30" Spindle Bore: 1.5" Power: 220V / 3-phase Spindle Speeds: Pulley: 2300 & 1150 RPM.
Clausing Metosa #SM-RT260, 22 x 76" Smart Lathe, 4-jaw 16" chuck, 3" hole thru spindle, 2005
Category: CNC Lathes and Turning Centers
Seller: AM Industrial
Location: Warren, OH
Mfr: Clausing
Model: SM-RT 260
Year: 2005
Clausing Metosa 22 x 76" CNC Lathe-AM24083, Model- SM-RT 260 Serial- 61359 Year: 05, 16" 4- jaw chuck 3" Hole thru spindle Toolholder Fanuc Quick Panel Control.
Coolant Filtering Systems
2 Results
Oberlin #OPF-4, coolant filtration system, fully automatic, 160 GPM, Allen Bradley PLC
Category: Coolant Filtering Systems
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Oberlin
Model: OPF-4
Oberlin #OPF-4 fully automatic coolant pressurefiltration system for chip processing, Capacity: 160 gallon (water base)Media area: 4 ft²Max filter pressure: 45 PSIAccepts standard roll mediaExtends coolant life 5 to 10 times by removing 90% solids byweightMachine-mounted push button type controlsAutomatic media ...more
Oberlin #OPF-4, coolant filtration system, 160 gallon, 4 sq.ft., mounted push button
Category: Coolant Filtering Systems
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Oberlin
Model: OPF-4
Oberlin #OPF-4 fully automatic coolant pressurefiltration system for chip processing, Capacity: 160 gallon (water base) Media area: 4ft² Max filter pressure: 45 PSI Accepts standard roll media Extends coolant life 5 to 10 times by removing 90% solids byweight Machine-mounted push button type controls Automatic ...more
KMT Sirio #370AF-E Production Saw
Category: Cutoff Saws
Seller: AM Industrial
Location: Warren, OH
Mfr: Kmt
Model: 370AF-E
KMT Sirio 370 AF-E Production Saw, Model: C370A-V, Serial 05007001, DOM: 05/06, Automatic Feed Table 3-phase 60 Hz 230 V.
Die Cutting Press Machines
1 Result
Bruno Machinery Corp Die Cutting Press
Category: Die Cutting Press Machines
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Bruno
Model: S325
Bruno Machinery Corp Die Cutting Press - Used - AM23248, Model: S325, Serial: 15611, 25-Tons Table: 24" x 60" Dimensions: 85"L x 63"W x 66"H Weight: 6320, Electrical:, 208/220-V, 3-Ph, 60-Hz.
Kubota #SQ-33, diesel engine generator, continuous operation
Category: Diesel Generators
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Kubota
Model: SQ-33
KUBOTA SQ33 Diesel Engine Power Generator - Used -, Model: SQ-33 Super Quiet Series, Type: V3300-BG-EU1, Family: 7KBXL03. 3BCC, Continuous operation 2-Stage muffler system to reduce noise Easy one-side maintenance Control panel door to protect instrument panel Forklift openings along base for ease of positioning Large ...more
73" x 45" Aercology #ATO-3000, downdraft table dust collector
Category: Downdraft Tables
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Aercology
Model: ATO-3000
Product, Stock Number AM22413 Brand Donaldson Torit Capacity 3,000.00 cfm, Aerocology 3,000 cfm downdraft dust collection table, Model: ATO-3000Table Size: 73″ x 45″Aluminum grill work surfaceDust drawers for easy dust removalIncludes: 5 HP Integral Blower and Electrical Controls.
Dust Collectors
91 Results
284 cfm Donaldson Torit #CAB-50, baghouse dust collection system, 30 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Donaldson Torit
Model: CAB 50
DONALDSON TORIT 284 cfm baghouse dust collection system, Model: CAB 50, Holds (1) envelope type bag filter set Total Filter Media Area: 30 ft² Air-To-Media Ratio @ 284 cfm: 9.46:1 Side Access Door for Filter Access.
300 cfm Demarco #MV10E, high vacuum dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Demarco
Model: MV10E
Product, Stock Number AM21699 Brand Demarco Capacity 300.00 cfm, 300 cfm Demarco MV10E High Vac Dust Collector, DEMARCO “Max-Vac” continuous-duty vacuum systemModel: MV10EContinuous pulse clean system with adjustable timingHinged access doors for easy filter maintenance or inspectionControl panel ...more
550 cfm Donaldson Torit #VS550, cartridge type dust collection system
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Donaldson Torit
Model: VS550
DONALDSON-TORIT 550 cfm cartridge-type dust collection system, Model: VS550, Holds (1) cartridge filter (vertical) Dust tray for collected material Includes: 1 HP Integrated Blower Rated for 550 cfm 208-230/460 Volt, 3 Phase Electrics Motor Starter and Controls.
550 cfm Torit #VS550, cartridge type dust collection system, reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Torit
Model: VS550
DONALDSON-TORIT 550 cfm cartridge-type dust collection system–reconditioned–, Model: VS550, Holds (1) cartridge filter (vertical) Includes New AirMax Premium Media Cartridge Filter Vibra-Shake Automatic filter cleaning system with Magnehelic Differential Pressure Gauge Dust tray for collected material ...more
900 cfm Blast It All #RPJ-2, Cartridge Collector, 600 sq.ft., reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Blast-It-All
Model: RPJ-2
BLAST-IT-ALL 900 cfm cartridge type dust collection system–reconditioned–, Model: RPJ-2, Holds (2) cartridge filters (vertical) New AirMax Premium Media Cartridge Filters Total Filter Media Area: 600 ft² Air-To-Media Ratio @ 900 cfm: 1.5 : 1 Automatic Reverse Pulse Clean System with magnehelic gauge ...more
900 cfm Blast It All #RPJ-2, Cartridge Collector, 600 sq.ft., reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Blast-It-All
Model: RPJ-2
BLAST-IT-ALL 900 cfm cartridge type dust collection system–reconditioned–, Model: RPJ-2, Holds (2) cartridge filters (vertical) New AirMax Premium Media Cartridge Filters Total Filter Media Area: 600 ft² Air-To-Media Ratio @ 900 cfm: 1.5 : 1 Automatic Reverse Pulse Clean System with magnehelic gauge ...more
900 cfm Blast It All #RPJ-2, Cartridge Collector, 600 sq.ft., reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Blast-It-All
Model: RPJ-2
BLAST-IT-ALL 900 cfm cartridge type dust collection system–reconditioned–, Model: RPJ-2, Holds (2) cartridge filters (vertical) New AirMax Premium Media Cartridge Filters Total Filter Media Area: 600 ft² Air-To-Media Ratio @ 900 cfm: 1.5 : 1 Automatic Reverse Pulse Clean System with magnehelic gauge ...more
900 cfm Blast It All #RPJ-2, Cartridge Collector, 600 sq.ft., reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Blast-It-All
Model: RPJ-2
BLAST-IT-ALL 900 cfm cartridge type dust collection system–reconditioned–, Model: RPJ-2, Holds (2) cartridge filters (vertical) New AirMax Premium Media Cartridge Filters Total Filter Media Area: 600 ft² Air-To-Media Ratio @ 900 cfm: 1.5 : 1 Automatic Reverse Pulse Clean System with magnehelic gauge ...more
1000 cfm IVS #WC-1000, Wet Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Ivs
Model: WC-1000
Product, Stock Number AM20917 Capacity 1,000.00 cfm, Industrial Ventilation Systems (IVS) 1,000 cfm wet type dust collection system, Model: WC-1000 Wet collection system for flammable/explosive materials Machine mounted operator controls Includes: Top Mount, Direct Drive Blower.
1070 cfm Donaldson #DMC-C, pitched hopper bottom w/drain, automatic pulse cleaning
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: DMC-C
Product, Stock Number AM18263 Brand Donaldson Torit Filter Media Area (square feet of media) 140 Capacity 1,070.00 cfm, 1,070 cfm Donaldson Torit #DMC-C “Dry-Flo” mist collection system, Holds (1) cartridge filterAutomatic pulse clean systemPitched hopper bottom with drainBlower and controls.
1100 cfm Avani #SPC-1000, portable dust/smoke/fume collection system, unused
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Avani Environmental
Model: SPC-1000
AVANI ENVIRONMENTAL Portable Dust / Smoke / Fume Collection system-unused-, Model: SPC-1000 4-Stage filtration system Rated for 1,100 cfm Minihelic pressure gauge Tool storage tray Flex-Arm with collection hood Includes: 1.5 HP Integrated Blower 120 Volt, 1 Phase Electrics Sold with Six Month Mechanical Warranty ...more
1230 cfm Donaldson #WSO-20-1, DMC-C mist collection dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Donaldson
Model: WSO 20-1
1,230 cfm Donaldson Torit DMC-C Mist Collection Dust Collector, Donaldson Torit 1,230 cfm cartridge-type mist collection system Model: WSO 20-1 Holds (1) large cartridge filter Magnehelic differential pressure gauge Steel Support Structure Includes:, Integral Blower and Electrical Controls.
1231 cfm Donaldson Torit #CAB-84, baghouse dust collection system, 150 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Donaldson Torit
Model: CAB 84
DONALDSON TORIT 1,231 cfm baghouse dust collection system-used-, Model: CAB 84, Holds (2) envelope type bag filter sets Total Filter Media Area: 150 ft² Air-To-Media Ratio @ 1,231 cfm: 8.2 : 1 Single Hopper Outlet with Sealing Drum Cover Kit Includes: 5 HP Side Mount, Direct Drive Blower Rated for 1,231 cfm.
1600 cfm Donaldson #SDF-6, 6-cartridge dust collector, automatic pulse clean system
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Donaldson
Model: SDF-6
1,600 cfm Donaldson Torit SDF-6 Cartridge Dust Collector, 1,600 cfm Donaldson Torit cartridge type dust collector Holds (6) cartridge filters Automatic pulse clean system Support steel Hopper outlet with sealing pail cover Integral Blower in Silencing Chamber and Electrical Controls.
1800 cfm AER #Hazdust-1800 Wet-type Dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Aer
Model: HAZDUST-1800
Product, Stock Number AM23007 Brand AER Control Systems Capacity 1,800.00 cfm, 1,800 cfm AER Hazdust 1800 Wet-type Dust collector, AER Control Systems Hazdust 1,800 cfm Wet-Type Dust Collection System for ducted applications -reconditionedModel: 1800 – Stainless Steel ConstructionDesigned for Flammable / ...more
2000 cfm Clean Air America #WS-5, booth & backdraft dust collector, 226 sq.ft., (4) cartridge filters, automatic pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Clean Air America
Model: WS-5
Product, Stock Number AM21834 Brand Clean Air America Filter Media Area (square feet of media) 226 Capacity 2,000.00 cfm, Clean Air America WeldStation” 2,000 cfm backdraft fume/smoke collection system, Model: WeldStation SingleHolds (4) cartridge filtersAutomatic Pulse Clean SystemSpark Arresting Dirty Air ...more
2000 cfm DSP Monoxivent #4 Cartridge type fume/smoke/dust collectiojn system, 904 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Dsp Monoxivent Kemper
Model: 4
DSP Monoxivent 2,000 cfm cartridge-type fume / smoke / dust collection system–used–, Model: 4 cartridge, Holds (4) cartridge filters Total Filter Media Area: 904 ft² Air-to-Media Ratio @ 2,000 cfm: 2.21 : 1 Includes: 5 HP Integral Blower Rated for 2,000 cfm Motor Starter & Controls Sold with Six ...more
2000 cfm Camfil Farr #GSXP-4, Cartridge Dust Collector, 4 vertical cartridge filters, automatic pulse clean system
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Camfil Farr
Model: GSXP-4
2,000 cfm Camfil Farr GSXP-4 Cartridge Dust Collector, Camfil Farr Gold Series 2,000 cfm X-Flo Packaged cartridge-type dust collection system Model: GSXP-4 Include (4) cartridge filters (vertical) Automatic Pulse Clean System Spark Trap Inlet Section Single Hopper Outlet with Drum Cover Kit Includes:, Top Mount Direct ...more
2400 cfm ProVent #V-4300, cartridge-type down draft table
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Provent
Model: V-4300
Product, Stock Number AM19576 Brand Uni-Wash Filter Media Area (square feet of media) 904 Capacity 2,400.00 cfm, 2,400 cfm Polaris Uni-Wash V-4300 Wet Dust Collector, Holds (4) round cartridge filtersAutomatic pulse clean system.
2500 cfm Camfil Farr #GSP-4, cartridge dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Camfil Farr
Model: GSP-4
2,500 cfm Camfil Farr GSP-4 Cartridge Dust Collector, Camfil Farr Gold Series 2,500 cfm Packaged Cartridge-Type Dust Collection System Model: GSP-4 Include (4) cartridge filters (vertical) Automatic Pulse Clean System Spark Trap Inlet Section Single Hopper Outlet with Drum Cover Kit Includes:, Top Mount Direct Drive ...more
2500 cfm UAS / Dust-Hog #F2500, fume dust collector,
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Uas
Model: F2500
Product, Stock Number AM21832 Brand Dust-Hog/UAS Capacity 2,500.00 cfm, UAS / Dust-Hog 2,500 cfm Mist Collection System, Model: F2500Holds (2) filter setsMagnehelic Differential Pressure GaugeThreaded Outlet Port for collected liquidIncludes: Direct Drive, Top Mount Blower and Electrical Controls.
3000 cfm Camfil Farr #GSP6, cartridge dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Camfil Farr
Model: GSP6
3,000 cfm Camfil Farr GSP6 Cartridge Dust Collector, Camfil Farr Gold Series 3,000 cfm Packaged Cartridge-Type Dust Collection System Model: GSP-6 Include (6) cartridge filters (vertical) Automatic Pulse Clean System Spark Trap Inlet Section Single Hopper Outlet with Container Includes:, Top Mount Direct Drive Blower ...more
3000 cfm Filter-1 #DHYD-1-30-5-4, HydroTron wet downdraft booth type dust collection system, reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Filter-1
Model: DHYD-1-30-5-4
FILTER-1 "HydroTron" 3,000 cfm wet downdraft booth-type dust collection system-reconditioned-, Model: DHYD-1-30-5-4 Wet collection system for flammable/explosive materials Electronic Water Level Control by Fan Pressure Mist Eliminator Section Interior Baffle Section Regain Air System Lights in Ceiling Workstation: 30" ...more
4000 cfm Filter-1 #Benchtron, downdraft dust collection table, 825 sq.ft., reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Filter-1
Model: BENCHTRON
FILTER-1 Benchtron 4,000 cfm Downdraft Dust Collection Table—reconditioned—, Model: Benchtron, Holds (3) cartridge filters Includes New AirMax Premium Media Cartridge Filters Total Filter Media Area: 825 sq ft Rated for 4,000 cfm Regain System with Crane Slot Automatic pulse cleaning system with ...more
4000 cfm Clean Air America #WeldStation-Dual booth with collection system, 904 sq.ft., reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Clean Air America
Model: WELDSTATION DUAL
CLEAN AIR AMERICA 4,000 cfm Weldstation Dual Booth with Collection System—reconditioned, Model: Weldstation Dual, Welding Booth Dimensions: 116" wide x 41" deep x 124" overall height, (2) work stations with Adjustable Height Work Table, Holds (4) cartridge filters Includes New AirMax Premium Media Cartridge ...more
4000 cfm Clean Air America #WeldStation-Dual booth with collection system, 904 sq.ft., reconditioned
Category: Dust Collectors
Seller: AM Industrial
Location: Warren, OH
Mfr: Clean Air America
Model: WELDSTATION DUAL
CLEAN AIR AMERICA 4,000 cfm WeldStation Dual Booth with Collection System—reconditioned, Model: Weldstation Dual, Welding Booth Dimensions: 116" wide x 41" deep x 124" overall height, (2) work stations with Adjustable Height Work Table, Holds (4) cartridge filters Includes New AirMax Premium Media Cartridge ...more
4000 cfm Donaldson #DFO2-8, cartridge dust collector, 1520 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: DFO2-8
Product, Stock Number AM22479 Brand Donaldson Torit Filter Media Area (square feet of media) 1,520 Capacity 4,000.00 cfm, DONALDSON-TORIT 4,000 cfm cartridge-type dust collection system, Model: DFO2-8Holds (8) cartridge filtersAutomatic Pulse Clean System with Delta P display and sequencing controlSingle Hopper Outlet ...more
4000 cfm Donaldson #DFE3-6, cartridge dust collector, 1524 sq.ft. filter media, (6) cartridge filters, automatic pulse clean system
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: DFE3-6
Product, Stock Number AM22241 Brand Donaldson Torit Filter Media Area (square feet of media) 1,524 Capacity 4,000.00 cfm, Donaldson Torit 4,000 cfm Evolution Series cartridge-type dust collection system, Model: DFE3-6Holds (6) cartridge filtersAutomatic Pulse Clean SystemSingle Hopper Outlet with Sealing Drum Cover ...more
4000 cfm Micro Air #RP8, (8) cartridge filters, 2000 sq.ft., automatic " Roto-Pulse" cleaning system
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Micro Air
Model: RP8
Product, Stock Number AM22089 Brand Micro Air Filter Media Area (square feet of media) 2,000 Capacity 4,000.00 cfm, Micro-Air 4,000 cfm cartridge-type dust collection system, Model: RP8Holds (8) cartridge filtersAutomatic “Roto-Pulse” Cartridge Cleaning System with controlSingle Hopper Outlet with Sealing ...more
4000 cfm Clean Air America #DFC-12, Cartridge Dust Collector, 2712 sq.ft., 12 cartridge filters
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Clean Air America
Model: DFC-12
4,000 cfm Clean Air America DFC-12 Cartridge Dust Collector, 4000 cfm Clean Air America DFC-12 Welding Fume / Smoke collection system Holds (12) cartridge filters Total Media Area: 2,712 ft² Automatic Pulse Clean System Integral Blower in silencing chamber Electrical Controls.
4000 cfm Clean Air America #WS5S, Welding Station Dual Fume Collection Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Clean Air America
Model: WS5S
Product, Stock Number AM22138 Brand Clean Air America Filter Media Area (square feet of media) 904 Capacity 4,000.00 cfm, Clean Air America WeldStation Dual – weld fume collection system., (2) Adjustable Height Work Areas with an integral fume collection system.(4) cartridge filtersAutomatic Pulse Cleaning ...more
4000 cfm Donaldson Torit #DFO2-8, cartridge dust collector, automatic pulse clean system, (8) cartridge filters
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Donaldson Torit
Model: DFO2-8
4,000 cfm Donaldson Torit DFO2-8 Cartridge Dust Collector, 4,000 cfm Donaldson Torit DFO2-8 cartridge type dust collector Holds (8) cartridge filters Automatic pulse clean system Single hopper outlet with sealing drum cover kit Blower and Electrical Controls.
4050 cfm Robovent FloorSaver #DFS-6000-6 Fume Collection Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Robovent
Model: DFS-6000-6
Product, Stock Number AM22984 Brand Robovent Filter Media Area (square feet of media) 2,130 Capacity 4,050.00 cfm, 4,050 cfm Robovent FloorSaver DFS-6000-6 Fume Collection Dust Collector, Robovent 4,900 cfm “Floorsaver Series” cartridge type weld smoke/fume collection system reconditionedModel: ...more
4500 cfm Micro Air #CAB8-881 Booth & Backdraft Dust Collector 1250 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Micro Air
Model: CAB8-881
Product, Stock Number AM22523 Brand Micro Air Filter Media Area (square feet of media) 1,250 Capacity 4,500.00 cfm, 4,500 cfm Micro-Air CAB8-881 Booth & Backdraft Dust Collector, 4,500 CFM Micro-Air CAB8-81 back-draft environmental control boothincludes (5) new cartridge type filtersautomatic pulse clean ...more
4500 cfm Donaldson Torit #ECB-1, Booth & Backdraft Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Donaldson Torit
Model: ECB-1
4,500 cfm Donaldson Torit ECB-1 Booth & Backdraft Dust Collector, Donaldson Torit 4,500 cfm Environmental Control Booth Back-draft Dust Collection System Model: ECB-1 Includes (6) Cartridge Filters (vertical) Dust Drawer for Collected Material Automatic Pulse Clean System Includes:, Integrated Blower and ...more
4500 cfm Micro Air #CAB8-881, ooth & Backdraft Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Micro Air
Model: CAB8-881
Product, Stock Number AM22522 Brand Micro Air Filter Media Area (square feet of media) 1,250 Capacity 4,500.00 cfm, 4,500 cfm Micro-Air CAB8-881 Booth & Backdraft Dust Collector, 4,500 CFM Micro-Air CAB8-81 back-draft environmental control boothincludes (5) new cartridge type filters, automatic pulse clean ...more
5000 cfm Camfil Farr #GS-6, Cartridge Dust Collector, 6 vertical cartridge filters, automatic pulse clean system
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Camfil Farr
Model: GS-6
5,000 cfm Camfil Farr GS-6 Cartridge Dust Collector, Camfil Farr “Gold Series” 5,000 cfm cartridge type dust collection system Model: GS-6 Includes (6) vertical cartridge filters Automatic Pulse Clean System Hopper Outlet with Sealing Drum Cover Kit Steel Support Structure Includes:, Top Mount Direct Drive ...more
5000 cfm MAC Process #2M2F8, Cartridge Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Mac
Model: 2M2F8
5,000 cfm MAC Process 2M2F8 Cartridge Dust Collector, Mac Process 5,000 cfm cartridge-type dust collection systemModel: 2MTF8Holds (8) cartridge filtersAutomatic Pulse Clean SystemSingle Hopper Outlet with Sealing Drum Cover KitSteel Support StructureIncludes:, Top MountDirect Drive Blower and Electrical Controls.
5050 cfm Diversi-Tech #DD-3X8, downdraft dust collector, (6) filters, reverse pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Diversi-Tech
Model: DD-3X8
Product, Stock Number AM22390 Brand Diversitech Capacity 5,050.00 cfm, Diversi-Tech 5,050 cfm downdraft dust collection table, Model: DD 3 x 8Holds (6) cartridge filtersReverse pulse cleaning system Table Dimensions: 42″ x 96″ x 36″Aluminum grill work surface Blower exhaust silencer Includes: ...more
5500 cfm Donaldson Torit #DWST-6, Booth & Backdraft Dust Collector, 6 cartridge filters
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Donaldson Torit
Model: DWST-6
5,500 cfm Donaldson Torit DWST-6 Booth & Backdraft Dust Collector, 5,500 cfm Donaldson Torit DWST-6 UnUsed – DownFlo work station power module Holds (6) cartridge filters Automatic pulse clean system Louvered inlet door Removable dust drawer for collected material, Integral Blower in Silencing Chamber and ...more
6000 cfm Camfil Farr #GS-8ISMF, 8 cartridge dust collector, automatic pulse clean system
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Camfil Farr
Model: GS-8 ISMF
6,000 cfm Camfil Farr GS-8 ISMF Cartridge Dust Collector, Camfil Farr “Gold Series” 6,000 cfm cartridge dust collection system Model: GS-8 with ISMF Includes (8) cartridge filters (vertical) Automatic Pulse Clean System Hopper Outlet with Sealing Drum Cover Kits Includes:, Top Mount Direct Drive Blower and ...more
6000 cfm Camfil Farr #GS-8ISMF, 8 cartridge dust collector, automatic pulse clean system
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Camfil Farr
Model: GS-8 ISMF
6,000 cfm Camfil Farr GS-8 ISMF Cartridge Dust Collector, Camfil Farr “Gold Series” 6,000 cfm cartridge dust collection system Model: GS-8 with ISMF Includes (8) cartridge filters (vertical) Automatic Pulse Clean System Hopper Outlet with Sealing Drum Cover Kits Includes:, Top Mount Direct Drive Blower and ...more
6000 cfm Donaldson #DFT3-12 Cartridge Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: DFT3-12
Product, Stock Number AM22582 Brand Donaldson Torit Filter Media Area (square feet of media) 3,048 Capacity 6,000.00 cfm, 6,000 cfm Donaldson Torit DFT3-12 Cartridge Dust Collector, Donaldson Torit 6,000 cfm cartridge-type dust collection systemModel: DFT3-12 EDAPHolds (12) cartridge filtersAutomatic Pulse Clean ...more
6000 cfm Mac Process #96LST64 Baghouse Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Mac Process
Model: 96LST64
Product, Stock Number AM22892 Brand Mac Process/Schenck Process Filter Media Area (square feet of media) 803 Capacity 6,000.00 cfm, 6,000 cfm Mac Process 96LST64 Baghouse Dust Collector, Mac Process 6,000 cfm baghouse-type dust collection systemModel: 96-LST-64Holds (64) 8’ long filter bagsAutomatic Pulse Clean ...more
7500 cfm Wheelabrator #34-WCC-36, (12) vertical cartridge filters, 3780 sq.ft., automatic pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Wheelabrator
Model: 34-WCC-36
Product, Stock Number AM22037 Brand Other Filter Media Area (square feet of media) 3,780 Capacity 7,500.00 cfm, Wheelabrator 7,500 cfm cartridge-type dust collection system, Model: 34 WCC 36Holds (12) cartridge filters (vertical)Automatic Pulse Clean SystemSingle Hopper Outlet with Sealing Drum Cover KitSteel Support ...more
8000 cfm Robovent #DFMA-8000-4 Backdraft Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Robovent
Model: DFMA-8000-4
Robovent 8,000 cfm Ambient cartridge-type dust/fume/smoke collection system, Model: DFMA-8000-4 Holds (4) 52″ tall cartridge filters Spark Trap Inlet with Metal prefilters Directional Nozzles for filtered air return Automatic Pulse Clean System Dust Trays for Collected Material Includes: Top Mount, Direct Drive ...more
8000 cfm Schubert Hydro Air #DBS2-4 GA, Wet Type Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Schubert
Model: DBS2-4 GA
8,000 cfm Schubert Hydro Air DBS2-4 GA Wet Type Dust Collector, 8,000 cfm Schubert Hydro Air DBS 2-4 Wet-Type Dust Colllection System Suited for flammable / Explosive material Eliminates sparks and fire risk – deflectors force sparks into submerged water bath Meets OSHA and NFPA regulations Mist eliminator ...more
11000 cfm Donaldson PowerCore #TG-12 Dust Collector 1764 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: TG-12
Product, Stock Number AM22750 Brand Donaldson Torit Filter Media Area (square feet of media) 1,764 Capacity 10,000.00 cfm, 10,000 cfm Donaldson Torit TG-12 Cartridge Dust Collector.
12000 cfm Plymovent #MDB-24-H, Cartridge Dust Collector, 6240 square feet of media, (3) Hopper Outlets
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Plymovent
Model: MDB-24-H
Product, Stock Number AM23116 Brand Plymovent Filter Media Area (square feet of media) 6,240 Capacity 12,000.00 cfm, 12,000 cfm Plymovent MDB-24-H Cartridge Dust Collector, PLYMOVENT 12,000 cfm Cartridge-Type Dust Collection System-reconditioned-Model: MDB-24-HHolds (24) Cartridge FiltersIncludes New AirMax Premium ...more
12000 cfm Donaldson #DMC-D6, mist dust collector, 1320 ft, (6) cartridge filters
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: DMC-D6
Product, Stock Number AM18672 Brand Donaldson Torit Filter Media Area (square feet of media) 1320 Capacity 12,000.00 cfm, 12,000 cfm Donaldson Torit #DMC-D6 cartridge mist collection system, Holds (6) large cartridge filtersThree stage filtrationSingle hopper outlet.
12000 cfm Moldow #SBD-160, Baghouse Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Moldow
Model: SBD-160
Product, Stock Number AM24613 Brand Moldow Filter Media Area (square feet of media) 1,760 Capacity 12,000.00 cfm, 12,000 cfm Moldow SBD-160 Baghouse Dust Collector, Moldow 12,000 cfm baghouse-type dust collection systemModel: SBD – 160Holds (160) fabric bag filtersAutomatic Reverse Air Cleaning System to Clean ...more
15000 cfm Donaldson #VH2-12, cartridge dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: VH2-12
15,000 cfm Donaldson Torit VH 2-12 Cartridge Dust Collector, Donaldson Torit PowerCore 15,000 cfm dust collection system Model: VH 2-12 Includes (12) PowerCore filter packs New Donaldson Ultra-Web filters included Automatic Pulse Clean System Hopper Outlet with Sealing Drum Covers Includes, Ground Mount Blower and ...more
15000 cfm Scientific #SL4-24, 24 cartridge dust collector, automatic pulse clean system
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Scientific
Model: SL4-24
15,000 cfm Scientific SL4-24 Cartridge Dust Collector, 15,000 cfm Scientific SL4-24HR Cartridge Type Dust Collection System (24) cartridge filters Automatic pulse clean system Single hopper outlet Ground Mount Blower and Electrical Controls.
18000 cfm Mac Process #96LST144, pulse-jet baghouse dust collector, 1807 sq.ft., (144) 8' long filter bags
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Mac
Model: 96LST144
18,000 cfm Mac Process 96LST144 Baghouse Dust Collector, 18,000 cfm Mac Process 96LST144 pulse-jet baghouse type dust collector (144) 8′ Long filter bags Total filter media area: 1,807 sq. ft. Automatic pulse clean system Top access doors for clean side filter access High side dirty air inlet Single hopper ...more
18000 cfm Flex Kleen CDC #4-4-32-III Cartridge Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Flex Kleen
Model: 4-4-32 III
18,000 cfm Flex-Kleen CDC 4-4-32 III Cartridge Dust Collector, Flex-Kleen 18,000 cfm Cartridge-Type Dust Collection System Model: CDC 4-4-32 III Holds (32) Cartridge Filters Automatic Pulse Clean System Hopper Outlets with Sealing Drum Cover Kits Steel Support Structure Ground Mount Blower and Electrical Controls.
19200 cfm Global Finishing Systems Booth & Backdraft Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Global Finishing Solutions
19,200 cfm Global Finishing Systems Booth & Backdraft Dust Collector, Global Finishing Systems 19,200 cfm Back-Draft Booth Dust Collection System (3) cartridge-type filter modules System Includes:, 20 ft wide Galvanized Lighted Booth Holds (33) Cartridge Filters – Vertical (3) Power Pack Blowers (4) Louvered ...more
20000 cfm Camfill Farr #GS-24 Cartridge Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Camfil Farr
Model: GS-24
Product, Stock Number AM22807 Brand Camfil Farr Filter Media Area (square feet of media) 7,800 Capacity 20,000.00 cfm, 20,000 cfm Camfil Farr GS-24 Cartridge Dust Collector, Camfil-Farr “Gold Series” 20,000 cfm cartridge-type dust collection systemModel: GS-24Includes (24) cartridge filters ...more
20000 cfm Donaldson #DFO4-32, cartridge dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: DFO4-32
Product, Stock Number AM22747 Brand Donaldson Torit Filter Media Area (square feet of media) 6,080 Capacity 20,000.00 cfm, 20,000 cfm Donaldson Torit DFO4-32 Cartridge Dust Collector, Donaldson Torit 20,000 cfm cartridge-type dust collection systemModel: DFO4-32Includes (32) cartridge filtersAutomatic Pulse Clean ...more
20000 cfm Donaldson #DFO4-32, cartridge dust collector, 32 cartridge filters
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: DFO4-32
20,000 cfm Donaldson Torit DFO4-32 Cartridge Dust Collector, Donaldson Torit 20,000 cfm cartridge-type dust collection system Model: DFO4-32 Includes (32) cartridge filters Automatic Pulse Clean System Two Hopper Outlets with Sealing Drum Cover Kits Steel Support Structure Includes:, Ground Mount Belt Drive Blower and ...more
24000 cfm Airlanco #188RLP8, baghouse dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Airlanco
Model: 188RLP8
24,000 cfm Airlanco 188RLP8 Baghouse Dust Collector, Airlanco 24,000 cfm round baghouse-type dust collection system Model: 188 RLP 8 Holds (188) 8’ long bag filters – complete set cages included Total Filter Media Area: 2,463 ft² Automatic Reverse Air Cleaning System with rotating manifold Integral ...more
24000 cfm Dust-Hog / Dust-Hog #FJH48-4, cartridge dust collector, 48 cartridge filters, automatic pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Dust-Hog
Model: FJH 48-4
24,000 cfm Dust-Hog / UAS FJH 48-4 Cartridge Dust Collector, 24,000 cfm Dust Hog / UAS cartridge type dust collection system Holds (48) cartridge filters Automatic pulse clean system Hopper outlet with sealing drum covers Steel support structure Ground Mount Blower and Electrical Controls.
25000 cfm Pauli Systems #RAM-40 Cartridge Dust Collector 12600 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pauli Systems
Model: RAM-40
Product, Stock Number AM22248 Brand Pauli Systems Filter Media Area (square feet of media) 12,600 Capacity 25,000.00 cfm, 25,000 cfm Pauli Systems RAM 4-10 Cartridge Dust Collector, Pauli Systems 25,000 cfm cartridge type dust collection systemModel: RAM4-10Holds (40) cartridge filters (vertical)Automatic Pulse Clean ...more
26000 cfm Robovent #DFM-26000-40, dust collector, (40) cartridge, 10240 sq.ft., automatic pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Robovent
Model: DFM-26000-40
Product, Stock Number AM21875 Brand Robovent Filter Media Area (square feet of media) 10,240 Capacity 26,000.00 cfm, Robovent 26,000 cfm cartridge-type dust/fume/smoke collection system, Model: DFM-26000-40Holds (40) cartridge filters (vertical)Automatic Pulse Clean SystemLow Profile Design with Slide Out ...more
30000 cfm Filter-1, booth dust collector, (3) Dustron power modules, (3) 7.5 HP blowers
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Filter-1
Product, Stock Number AM16184 Brand Filter-1 Filter Media Area (square feet of media) 10,500 Capacity 30,000.00 cfm, 30,000 cfm Filter-One DC30-42-10T-16D-CF Booth Power Modules, Model: DC30-42-10T-16D-CF(3) Dustron Power ModulesHolds (42) Cartridge filters totalAutomatic Pulse clean system(3) Blowers for 30,000 ...more
30000 cfm Robovent #DT4-40000-20, cartridge dust collector, (20) 52" vertical cartridge filters
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Robovent
Model: DT4-40000-20
30,000 cfm Robovent DT4-40000-20 Cartridge Dust Collector, Robovent “Fusion” 30,000 cfm cartridge-type fume / smoke / dust collection system Model: DT4-40000-20 Holds (20) 52″ tall cartridge filters (vertical) Includes New AirMax Premium Media Cartridge Filters – Fire Retardant Automatic Pulse ...more
30000 cfm Scientific #SPJ-196-X4T8, baghouse dust collector, automatic pulse cleaning system
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Scientific
Model: SPJ-196-X4T8
30,000 cfm Scientific SPJ-196-X4T8 Baghouse Dust Collector, 30,000 cfm Scientific SPJ-196-X4T8 bag-house type dust collection system (196) 8′ long bag filters Automatic pulse cleaning system Walk-in plenum for filter access Extended low velocity inlet section Single outlet with rotary airlock discharge New York ...more
32000 cfm Rodrigue #CA-55 Cartridge Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Rodrigue
Model: CA-55
Product, Stock Number AM19281 Filter Media Area (square feet of media) 15400 Capacity 32,000.00 cfm, Rodrigue 32,000 cfm cartridge-type dust collection system, Model: CA-55Includes (55) cartridge filtersAutomatic Pulse Clean System(6) Hopper Outlets with Sealing Drum Cover KitsSteel Support StructureIncludes: Ground ...more
32000 cfm UAS / Dust Hog #SBD-48 Cartridge Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Uas
Model: SBD-48
Product, Stock Number AM18347 Filter Media Area (square feet of media) 14880 Capacity 32,000.00 cfm, UAS / Dust-Hog 32,000 cfm cartridge type dust collection system, Model: SBD48-4Includes (48) cartridge filtersAutomatic Pulse Clean SystemHopper Outlets with Sealing Drum Cover KitsSteel Support StructureIncludes: ...more
40000 cfm Mac Process #4MTF46 Cartridge Dust Collector 18880 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Mac
Model: 4MTF46
Product, Stock Number AM22637 Brand Mac Process/Schenck Process Filter Media Area (square feet of media) 18,880 Capacity 40,000.00 cfm, 40,000 cfm Mac Process 4MTF64 Cartridge Dust Collector, Mac Process 40,000 cfm cartridge-type dust collection systemModel: 4MTF64Includes (64) cartridge filtersAutomatic Pulse Clean ...more
40000 cfm ECS #P-40, portable cartridge dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Model: P-40
Product, Stock Number AM22410 Brand Other Capacity 40,000.00 cfm, 40,000 cfm ECS P-40 Portable Cartridge Dust Collection System, ECS 40,000 cfm Skid Mounted Portable Cartridge-Type Collection SystemModel: M-40Holds (40) Vertical Cartridge FiltersAutomatic Pulse Clean SystemTrough Hopper Outlet with Material Discharge ...more
42000 cfm Gencor #BH42-1000 Pulse-Jet Baghouse Dust Collector 10770 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Gencor
Model: BH42-1000
Product, Stock Number AM21962 Brand Gencor Filter Media Area (square feet of media) 10,770 Capacity 42,000.00 cfm, Gencor 42,000 cfm baghouse-type dust collection system, Mode: HB-42-1000-88-NAHolds (490) 14 ft bag filtersAutomatic Pulse Clean SystemTop Access Clean Air Service Plenum – top doors for filter ...more
45000 cfm Donaldson #376RFW10, Baghouse Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Donaldson
Model: 376 RFW 10
45,000 cfm Donaldson Torit 376 RFW 10 Baghouse Dust Collector, Donaldson Torit 45,000 cfm Round Baghouse Type Dust Collection System Model: 376RFW10 Holds (376) 10′ long filter bags Automatic Reverse Pulse Cleaning System Walk-In Clean Air Plenum for Clean Side Filter Access Explosion Vents Cyclonic Dirty Air ...more
48000 cfm Mac Process #144MCF361, baghouse dust collector, 5235 sq.ft. filter
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Mac
Model: 144MCF361
Product, Stock Number AM20849 Filter Media Area (square feet of media) 5235 Capacity 48,000.00 cfm, Mac Process 48,000 cfm round baghouse-type dust collection system, Model: 144MCF361, Holds (361) 12’ long bag filtersAutomatic Reverse Pulse Clean SystemDisplacement Air Pump for filter cleaningHigh Side Dirty Air ...more
50000 cfm Donaldson #484RFW8, Baghouse Dust Collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Donaldson
Model: 484 RFW 8
50,000 cfm Donaldson Torit 484 RFW 8 Baghouse Dust Collector, Donaldson Torit 50,000 cfm round baghouse-type dust collection system Model: 484 RFW 8 Holds (484) 8′ long filter bags Automatic Reverse Air Cleaning System with Rotating Manifold and Cleaning Blower (No Compressed air required) Walk-In Clean Air ...more
52000 cfm Camfill Farr #84LL, cartridge dust collector, 25200 sq.ft., automatic pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Camfill
Model: 84LL
Product, Stock Number AM20996 Brand Camfil Farr Filter Media Area (square feet of media) 25200 Capacity 52,000.00 cfm, Camfil Farr 52,000 cfm cartridge-type dust collection system, Model: 84LLHolds (84) cartridge filters (vertical)Automatic Pulse Clean SystemHopper Outlet with Sealing Drum Cover KitSteel Support ...more
55000 cfm Dixie Air Systems #SPB-LH-348-12, baghouse dust collector, (348) 12' Long filter bags, 5701 sq.ft., automatic pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Dixie Air
Model: SPB-LH-348-12
Product, Stock Number AM22136 Brand Other Filter Media Area (square feet of media) 5,701 Capacity 55,000.00 cfm, Dixie Air Systems 55,000 cfm round baghouse-type dust collection system, Model: 348-12Holds (348) 12′ long filter bagsAutomatic Pulse Cleaning System with manifold and pulse valves Walk-in Clean Air ...more
55000 cfm Donaldson Torit #458RFW10, baghouse dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: 458RFW10
Product, Stock Number AM23409 Brand Donaldson Torit Filter Media Area (square feet of media) 5,959 Capacity 55,000.00 cfm, 55,000 cfm Donaldson Torit 458RFW10 Baghouse Dust Collector, Donaldson Torit 458RF10 round baghouse dust collection systemHigh side dirty air inlet with baffleBlower & controls.
55000 cfm Pneumafil Corporation #13.5-448-10, baghouse dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Pneumafil
Model: 13.5-448-10
55,000 cfm Pneumafil Corporation 13.5-448-10 Baghouse Dust Collector, Pneumafil 55,000 cfm round baghouse-type dust collection system Model: 13.5-448-10 Sectional construction allows orientation to be rotated Holds (448) 10’ long bag filters Automatic Reverse Air Cleaning System Explosion Vents Cyclonic Dirty ...more
60000 cfm Mac Process #144MWP312, baghouse dust collector, automatic reverse air clean system
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Mac
Model: 144MWP312
60,000 cfm Mac Process 144MWP312 Baghouse Dust Collector, Mac Process 60,000 cfm round baghouse-type dust collection system Model: 144MWP312 Holds (312) 12’ long bag filters Automatic reverse air clean system with integral blower and rotating arm for filter cleaning Cyclonic Dirty Air Inlet with Involute Scroll ...more
65000 cfm Steelcraft #S10-544-6718, baghouse dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Steelcraft
Model: S10-544-6718
65,000 cfm Steelcraft S10-544-6718 Baghouse Dust Collector, Steelcraft Filtrex 65,000 cfm Round Baghouse-Type Dust Collection System Model: S10-544-6718 – 14 ft diameter Holds (544) 10’ long snap band bag filters Automatic Filter Cleaning System Walk In Clean Air Service Plenum Explosion Vents Cyclonic ...more
65000 cfm Waltz Holst #12-456-7045, baghouse dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Waltz Holst
Model: 12-456-7045
65,000 cfm Waltz Holst 12-456-7045 Baghouse Dust Collector, 65,000 cfm Waltz-Holst 12-456-7045 Baghouse-Type Dust Collection System Holds (456) 12′ long filter bags 7,045 ft sq of filter media area Automatics Reverse Air Filter Cleaning System with Integral Blower in Clean Air Plenum and Rotating Arm Walk-in ...more
70000 cfm Airlanco #450RLP10, baghouse dust collector, automatic reverse air cleaning system w/rotating manifold
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Airlanco
Model: 450RLP10
70,000 cfm Airlanco 450RLP10 Baghouse Dust Collector, Airlanco 70,000 cfm round baghouse-type dust collection system Model: 450 RLP 10 Holds (450) 10’ long bag filters – complete set cages included Total Filter Media Area: 7,380 ft² Automatic Reverse Air Cleaning System with Rotating Manifold Integral ...more
70000 cfm Donaldson #484RFW12, baghouse dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Donaldson
Model: 484RFW12
70,000 cfm Donaldson Torit 484RFW12 Baghouse Dust Collector, Donaldson Torit 70,000 cfm round baghouse-type dust collection system Model: 484RFW12 Holds (484) 12′ long filter bags Automatic Reverse Pulse Clean System Walk-In Clean Air Service Plenum for filter access Cyclonic Dirty Air Inlet with Involute Scroll ...more
80000 cfm Wheelabrator #815-WCC-36, cartridge dust collector, 120 round cartridge filters
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Wheelabrator
Model: 815-WCC-36
Product, Stock Number AM17572 Brand Wheelabrator Filter Media Area (square feet of media) 37800 Capacity 80,000.00 cfm, 80,000 cfm Wheelabrator #815 WCC 36 cartridge dust collection system, Holds (120) round cartridge filtersVenturi assisted pulse cleanVertically installed filters with locking rail filter retention ...more
85000 cfm Aero Pulse #M-912-10-H-N-WP, baghouse dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Aero Pulse
Model: M-912-10-H-N-WP
Product, Stock Number AM20573 Filter Media Area (square feet of media) 14320 Capacity 85,000.00 cfm, Aero Pulse 85,000 cfm baghouse dust collection system, Model: M-912-10-H-N-WPHolds (912) 10′ long bag filtersAutomatic Pulse Clean SystemTrough Hopper Outlet with Screw Conveyor Discharge and Rotary Airlock ...more
90000 cfm ACT #5-140, cartridge dust collector, 140 cartridge type filters, automatic pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Clevaland, OH
Mfr: Act
Model: 5-140
90,000 cfm ACT 5-140 Cartridge Dust Collector, ACT 90,000 cfm cartridge-type dust collection system reconditioned Model: ACT 5-140 Holds (140) cartridge-type filters Includes New AirMax Premium Media Filters Automatic Pulse Clean System Hopper Outlets with Sealing Drum Cover Kits Steel Support Structure Includes: ...more
90000 cfm Scientific #SPJ-704-X4T8, baghouse dust collector, automatic pulse cleaning system
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Scientific
Model: SPJ-704-X4T8
90,000 cfm Scientific SPJ-704-X4T8 Baghouse Dust Collector, 90,000 cfm Scientific SPJ-704-X4T8 bag-house type dust collection system (704) 8′ long bag filters Automatic pulse cleaning system Walk-In plenum for filter access Extended low velocity inlet section Trough hopper outlet with screw conveyor discharge ...more
100000 cfm Wheelabrator #820-WCC-36, 160 cartridges, dust collector, 50400 sq.ft.
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Wheelabrator
Model: 820-WCC-36
Product, Stock Number AM17573 Brand Wheelabrator Filter Media Area (square feet of media) 50400 Capacity 100,000.00 cfm, 100,000 cfm Wheelabrator #820 WCC 36 cartridge dust collection system, Holds (160) round cartridge filtersVenturi assisted pulse cleanVertically installed filters with locking rail filter retention ...more
100000 cfm ETA Engineering 6715 x 120, baghouse dust collector
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eta
Model: ETA 2000 6715 X 120
100,000 cfm ETA Engineering 6715 x 120 Baghouse Dust Collector, ETA 100,000 cfm Module Baghouse Dust Collection System Model: ETA 2000 6715 x 120 Holds 1,005 10′ long snap-band bag filters System cleaned and debagged Complete set of cages included Automatic Pulse Clean System Walk-In Clean Air Plenum for filter ...more
120000 cfm Wheelabrator, (176) cartridge dust collector, blower, controls, pulse clean
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Wheelabrator
Product, Stock Number AM17570 Brand Wheelabrator Filter Media Area (square feet of media) 55440 Capacity 120,000.00 cfm, 120,000 cfm Wheelabrator #822 WCC 36 cartridge dust collection system, Holds (176) round cartridge filtersTotal filter media area: 55,440 ft²Venturi assisted pulse cleanVertically installed ...more
180000 cfm Eta #5415x120, Baghouse Dust Collector, (1620) 10' L snap band bag filters
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eta
Model: 5415 X 120
180,000 cfm ETA Engineering 5415 x 120 Baghouse Dust Collector, ETA 180,000 cfm 2 Module Baghouse Dust Collection System Model: ETA 2000 (2) 5415 x 120 Holds 1,620 10′ long snap-band bag filters System cleaned and debagged Complete set of cages included Automatic Pulse Clean System (2) Walk-In Clean Air Plenum ...more
Oberlin #OPF-07, fully automatic pressure filter system, 2002
Category: Filtration Systems
Seller: AM Industrial
Location: Warren, OH
Mfr: Oberlin
Model: OPF-07
Year: 2002
OBERLIN fully automatic pressure filter system-used-, Model: OPF-07 Serial: 467 SD, Manufactured Date- October-2002, Rate for up to: 280 gallons per minute Equally effective on oil, water and synthetic coolants Media Area: 7 ft² Extends coolant life 5 to 10 times by removing 90% solids by weight Accepts standard ...more
Forklifts
1 Result
10000 lb. Combilift #CL60100LA24, Narrow Aisle Forklift, propane powered, 2008
Category: Forklifts
Seller: AM Industrial
Location: Warren, OH
Mfr: Combilift
Model: CL60100LA27
Year: 2008
Combi-Lift CL60100LA27 Side-Loader Multi-Directional Forklift - Used - AM24569, Model: CL60100LA24, Serial: 5789, Rated Capacity: 10,000-lbs Hours: 4,708 Load Center: 12-Inches Unladen Weight: 17,200-lbs Propane Powered DOM: 05/08.
Horizontal Band Saws
3 Results
14.5" x 8.5" Roll-In-#EF1459, band saw, New in box
Category: Horizontal Band Saws
Seller: AM Industrial
Location: Cleveland OH, OH
Mfr: Roll-In
Model: EF-1459
EF-1459 Roll-In Saw - 120-V Bandsaw – New In Box - AMS591101-4, Model: EF1459, Blade travel: 9" into work Cutting capacity at 90°: Round: 8.5" Rectangle: 14.5" x 8.5" Miter cut angle range: 0°-45° Capacity under guides: 14-1/2" Throat: 8-3/4" Blade size (included): 3/4" W x 8/12T x 10' L.035" thick ...more
14.5" x 8.5" Roll-In-Saw #EF1459, band saw, New in box
Category: Horizontal Band Saws
Seller: AM Industrial
Location: Cleveland OH, OH
Mfr: Roll-In
Model: EF-1459
EF-1459 Roll-In Saw - 120-V Bandsaw – New In Box - AMS591101-4, Model: EF1459, Blade travel: 9" into work Cutting capacity at 90°: Round: 8.5" Rectangle: 14.5" x 8.5" Miter cut angle range: 0°-45° Capacity under guides: 14-1/2" Throat: 8-3/4" Blade size (included): 3/4" W x 8/12T x 10' L.035" thick ...more
14.5" x 8.5" Roll-In Saw #EF1459, horizontal band saw, 8.75" throat, 3/4" W x 8/12" T x 10' L blade, 1 HP motor
Category: Horizontal Band Saws
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Roll-In
Model: EF1459
Product, Stock Number AMROLLSAW2 Brand Other Capacity 8.00 inches, Roll-In-Saw all-purpose horizontal band saw – NEW, Model: EF1459:, Blade Travel: 9″ into workCutting Capacity at 90°:Round: 8.5″Rectangle: 14.5″ x 8.5″Miter cut angle range: 0°-45°Capacity under guides: ...more
25 Ton, Multipress #25T-SPEC-C-592E, Hydraulic Press
Category: Hydraulic Presses
Seller: AM Industrial
Location: Warren, OH
Mfr: Multipress
Model: 25T-SPEC-C-592E
MulitiPress 25T-SPEC-C-592E Hydraulic Press, Model- 25T-SPEC-C-592E Serial-31727 : 20HP motor 230-460/3/60.
Induction Melting Furnace
2 Results
20 KW Ajax #E-20AP-46-C1N-Z Magnathermic Induction Melting Furnace with 200 kW Power Supply
Category: Induction Melting Furnace
Seller: AM Industrial
Location: Warren, OH
Mfr: Ajax
Model: E-20AP-46-C1N-Z
AJAX MAGNATHERMIC Induction Melting Furnace - Used, Model: E-20AP-46-C1N-Z Serial #M2L280-B DOM 6/98, INCLUDES, Channel type tilting furnace Dumping cart 15 Receiving ingot molds Rotary table Platforms Controls 200 kW power supply Removed from service 2022 and more VIDEO PRIOR TO REMOVAL - LATE 2022.
Ajax Magnethermic #B2 Induction Melting Furnace, 112 KVA
Category: Induction Melting Furnace
Seller: AM Industrial
Location: Warren, OH
Mfr: Ajax
Model: B2
AJAX Magnethermic Corp. B2 112-KVA Induction Melting Furnace - Used - AM21528, Model: B2, Serial: M81510, Power Input Rating: 112 KVA 155 Amps Electrical: 480-V, 3-Ph, 60-Hz Power Output Rating: 100 KW 2000 Amps 3000 Frequency Electrical: 400-V, Single Phase.
Industrial Robot Attachments and Parts
3 Results
Kuka KR6R900 C4SR Robot & Control
Category: Industrial Robot Attachments and Parts
Seller: AM Industrial
Location: Warren, OH
Kuka Robots & Controls-AM24673, Model: KR 6RR900 Serial# 511166 DOM: 02/2018, Weight: 52 KG Load Charge: 6 kG Payload Capacity: 6kg Axes: 6 Controls Included.
Kuka KR6R900 C4SR Robot & Control
Category: Industrial Robot Attachments and Parts
Seller: AM Industrial
Location: Warren, OH
Kuka Robots & Controls-AM24674, Model: KR6R900 C4SR Serial# 1025572 DOM: 02/2020, Weight: 52 KG Load Charge: 6 kG Payload Capacity: 6kg Range 901mm Axes: 6 Controls Included.
Kuka Robots & Controls
Category: Industrial Robot Attachments and Parts
Seller: AM Industrial
Location: Warren, OH
Kuka Robots & Controls-AM24675, Model: KR6R900 C4SR DOM: 03/2018, Weight: 52 KG Load Charge: 6 kG Payload Capacity: 6kg Axes: 6 Controls Included.
Melton Weld Cell with Kuka Robot
Category: Industrial Robots
Seller: AM Industrial
Location: Warren, OH
Mfr: Melton
Melton Weld Cell with Kuka Robot-AM24562, Serial #: MMCC11480, Full Load Current: 29 AMPS, Largest Load 15 AMPS, Main Disconnect Fuse 45 AMPS, Short Circuit Current 100 KA, 460v 3 Phase 60 Hz.
Dumore, dual head tapping & insertion machine
Category: Insertion Machines
Seller: AM Industrial
Location: Warren, OH
Mfr: Dumore
Dumore Dual Head Tapping & Insertion Machine, 2- Dumore 1.5 HP heads, 1- 9KVA transformer, Dimensions: 48 X 24" Table, Overall Dimensions: 80 X 30".
Lewco #CB8ET--48-18-48 Heat-Pro 800° Oven
Category: Laboratory Type Ovens
Seller: AM Industrial
Location: Warren, OH
Mfr: Lewco
Model: CB8ET--48-18-48
Year: 2002
Lewco Heat-Pro 800 Degree Oven, Model-CB8ET-- 48-18-48, Serial- 004268-001, Date of Mfr. 01/02, Max. Temp- 800F, Capacity: Dual Chamber- 34X52X24"H, Electrics- 480/3/60Hz..
Pipe and Tube Welders
1 Result
150 KW Thermatool CFI4-1506460, Solid State HF Welder
Category: Pipe and Tube Welders
Seller: AM Industrial
Location: Warren, OH
Mfr: Thermatool
Thermatool CFI4-1506460 Solid State HF Welder, Model- CFI4-1506460, Serial- 2004, Output KW- 150, Input Volts- 460/3Ph, KVA- 300.
Coilco Extrupunch #12008, 3.5" tube branching machine
Category: Pipe Machinery
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Coilco
Model: 12008
3-1/2″ Coilco Extrupunch #12008 Tube Branching Machine, Tube diameter capacity: 0.625” – 3.5” OD Maximum wall thickness: 0.125” Minimum distance between whole collar edges: 0.25” Minimum distance between flat hole edges: 0.03125” Average collar height above surface: ...more
T-Drill #S-54-FE, 2.125" tube branching & collaring machine
Category: Pipe Machinery
Seller: AM Industrial
Location: Cleveland, OH
Mfr: T-Drill
Model: S-54-FE
2.125″ T-Drill S-54-FE Tube Branching & Collaring Machine, For Steel tubing It Includes 1 head mounted on machine It is New in 2005. Serial Number is 105035 Pneumatic hold down clamp. 2 hand control.
Power Squaring Shears (Gauge)
1 Result
10 gauge Hydra-Tool #1008, Hydraulic Shear
Category: Power Squaring Shears (Gauge)
Seller: AM Industrial
Location: Warren, OH
Mfr: Hydra-Tool
Model: 1008 HS
Hydra-Tool 1008 Hydraulic Shear-AM24661, Model: 1008HS SN: M9154, Capacity: 10 GA..
Reciprocating Surface Grinders - Horizontal Spindle
2 Results
6" x 18" Falcon #FSG-618M, Surface Grinder
Seller: AM Industrial
Location: Warren, OH
Mfr: Falcon
Model: FSG-618M
Year: 2000
Falcon Chevalier FSG-618M Surface Grinder-AM24698, Model:FSG-618M Serial: A3896028, Spindle Speed: 3,450 RPM With Magnetic Chuck Poles: 2 Cycles: 50 Hz Bearing 6205/6203 Date:2000 RPM: 2850 Outlet 2 HP AMPS 6/3.2A.
ELB Schliff #8W6VAI, Surface Grinder
Seller: AM Industrial
Location: Warren, OH
Mfr: Elb
Model: 8W6VAI
ELB Schliff 8W6VAI Surface Grinder, Model:8W6VAI, Serial: 85410357.
10 Stand, Tishken, Rollformer, 1.5" rolls, 2" shaft, control
Category: Rollformers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Tishken
Tishken 10 Stand Roll Former - Used -AM23284, / Capabilities, 10 Stand, 1.5" Rolls, 2" Shaft, Control, 7' Wide, 6' Tall.
20 Stand, Tishken Rollformer, 2" OD shafts
Category: Rollformers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Tishken
TISHKEN 2" 20 Stand Rollformer - Used - AM23271, Bases: 2 Stands: 20 Spindle Size: 2" Roll Space: 8.5" Approx. Roll Space Horizontal Centers: 12" Approx. Includes:, Machine Mounted Push Button Operator Controls Tishken Drive Train No Tooling Included, Call us!, We will load for free - Shipping rates available!.
Roper Whitney Pexto #3617D, Rollformer
Category: Rollformers
Seller: AM Industrial
Location: Warren, OH
Mfr: Roper Whitney
Model: 3617D
Roper Whitney Pexto 3617D Roll Former-AM24684, Model: 3617D Serial #: 654-10-91, s 300 and wire feeder. Serial No. ME021839U.
Rotary Screw Air Compressors (Positive Displacement)
1 Result
94 acfm, 125 psi, Sullair #ES-8 25 DH Rotary Screw Air Compressor
Seller: AM Industrial
Location: Warren, OH
Mfr: Sullair
Model: ES-8 25 DH
SULLAIR rotary screw type air compressor with integrated air dryer— Used — AM18843, Model: ES-8 25 DH Serial: 200603310171, Discharge ACFM: 94 Discharge PSI: 125 Includes:Skid mounted compressor base with enclosure Machine mounted Sillair operator controls 100 CFM Integrated Sullair Air Dryer 37,360.2 ...more
Rotary Vane Pumps (Not Vacuum)
1 Result
Borger 18.5KW Stainless Steel Pump, 2009
Category: Rotary Vane Pumps (Not Vacuum)
Seller: AM Industrial
Location: Warren, OH
Mfr: Borger
Year: 2009
Borger 18.5 KW S/S Pump, Type- CL390, Serial- 29110264, Year- 2009, Jet Solutions 5" Valve.
Single Cranked Back Gear OBI Press Machines
1 Result
55 Ton, Heim #5A, OBI Punch Press, 6" stroke, air clutch, 18" x 28" bolster plate
Seller: AM Industrial
Location: Warren, OH
Mfr: Heim
Model: 5A OBI BG
Heim 55Ton O.B.I. Punch Press, Model- 5A OBI BG, Serial- 1961, Bolster Plate- 18 X 28", Stroke- 6", Air Clutch.
Small Hole EDM Drilling Machine
1 Result
Electrical Discharge Machine #DrillMate-EDB-640, CNC Hole Driller, automatic electrode changer, dual touch screen
Category: Small Hole EDM Drilling Machine
Seller: AM Industrial
Location: Warren, OH
Mfr: Edm
Model: DRILLMATE-EDB-640
EDM Drill Mate EDB 640 CNC Hole Driller, Includes:, ● Automatic Electrode Changer (0.25mm~3.0mm), ● Minimum size electrode capability: 0.08mm (electrode with.5mm shank), ● Dual Touch Screen - (15” Monitors), ● Windows 10, ● Interactive Programming Function, ● Real-Time Tool Path Display, ● Program ...more
Swiss Type and Lathe CNC Automatic Screw Machines
1 Result
Star #ECAS-20, CNC Screw Machine with Feeder, Siemens 840DI Control with Star Motion Control
Seller: AM Industrial
Location: Warren, OH
Mfr: Star
Model: ECAS-20
Star ECAS-20 CNC Screw Machine with Feeder, Model: ECAS-20 Serial: 67_270685/R620588, Max. Machining Diameter: 20 mm Max. Drilling Capacity: 10 mm Max. Headstock Stroke: 8" Coolant Tank Capacity: 120 L Machine Dimensions: 8.5' L × 3.77' D × 5.79' H Machine Weight: 7,700 lbs Other s:, Full C-axis control on ...more
1.37" Reed-Prentice #A22R, Thread Roller, 7" roller iwdth, recent rebuild
Category: Thread Rollers
Seller: AM Industrial
Location: Warren, OH
Mfr: Reed-Prentice
Model: A22R
Reed A22R Thread Roller, Model- A22R, Serial- M773R, *Recently factory rebuilt, Diameter 1.37" Approx. Roller width 0.7" Approx. Roll threads with a pitch of 1.25 inches, Wide range of application use.
1/2" Conrac #401LH, tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Conrac
Model: 401LH
Product, Stock Number AM20789 Brand Conrac Capacity 0.50 inches,.5″ Conrac 401LH Tube Bender, CONRAC manual tube bending machine-used-Model: 401 LH Serial: 84230-21:, Maximum tube diameter: 1/2″ (12mm) ODMinimum tube diameter: 1/8″ (3mm)Bending rotation: RH or LHIncludes:, Manual positioning carriage ...more
1/2" Integrity Engineering, retube bend machine, 2 bends at a time, machine mounted operator controls
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Clevleand, OH
Mfr: Integrity Engineering
Capabilities:, Maximum Tube Capacity: 1/2" (Copper) 2-Bends at a time Includes:, Machine mounted operator controls.
1/2" Pines #107, tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 107
Product, Stock Number AM20788 Brand Pines Capacity 0.50 inches, Pines 3-Axis CNC horizontal tube bending machine, Model: 107Tube: 1/2” x.165” wall (mild steel)Maximum centerline radius: 4″Maximum tube bending rotation: 195 degreesBending Rotation: Left Hand (counter-clockwise)Pedestal type cycle ...more
1-1/2" Langbow #TM38, twin head bender, 2 hand control cycle start, 2 hand cycle start pedestal
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Langbow
Model: TM38
Capacities:, Maximum tube diameter: 1-1/2” OD (round tube)Maximum distance between centers: 72”Great for high-production round and square and rod bendingCabable of running two parts at a time each with two bendsIncludes:, 2-Hand Control Cycle StartEach head has its own degree of bend settingIntegrated ...more
1.5" Pines #14T, vertical tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 14T
Product, Stock Number AM22347 Brand Pines Capacity 1.50 inches, 1.5″ Pines 14T Vertical Tube Bender, PINES high production hydraulic vertical tube bending machine-usedModel: 14T Serial: 44850-98053Capacities:, Tube {round}: 1-1/2” x.065” wall (mild steel)Production capacity 2 tube per stroke: 1,000 ...more
1.66" Pines #2 Tube Bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 2
Product, Stock Number AM22402 Brand Pines Capacity 1.66 inches, 1.660″ Pines #2 Tube Bender, PINES horizontal mandrel tube bending machine-usedModel: #1-1/4:, Minimum bending capacity: 1/4″ODMaximum bending capacity:Round tube (non-ferrous): 3” x.065” wallRound tube (stainless steel): ...more
2-1/2" Clarke & Lewis #CL-200, tube bender, 2.5000 inches
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Clark & Lewis
Model: CL-200
Product, Stock Number AM21951 Brand Clarke & Lewis Capacity 2.50 inches, 2.5″ Clarke & Lewis CL-200 Tube Bender, CLARKE & LEWIS horizontal tube bending machine-usedModel: CL-200:, Minimum tube diameter: 1/4″ODMaximum tube diameter: 2-1/2” ODMaximum degree of bend: 180° + ...more
2-1/2" Eaton Leonard, benders
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eaton Leonard
Product, Stock Number AM22397 Brand Eaton Leonard Capacity 3.00 inches, 3″ Eaton Leonard Vector Bendit Tube Bender, EATON LEONARD vertical tube bending machine-used-Model: Vector Bendit Serial: VBXXBX124MT0693:, Minimum tube diameter:.25″ODMaximum tube diameter: 3″ ODAutomatic and manual ...more
3" Horn Machine Tools #A75TNCPBL, tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Horn
Model: A75TNCPBL
3″ Horn Machine Tools A75TNCPBL Tube Bender, Horn A75TNCPBL 2-Axis horizontal mandrel tube bending machine Capacities:, Minimum tube diameter:.125” OD Maximum tube diameter: 3” OD Maximum degree of bend: 180° + springback Maximum bend centerline radius: 10.2” Maximum tube length over ...more
3" Pines #2, with Split-Die Tube/Pipe Bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 2
Product, Stock Number AM21266 Brand Pines Capacity 3.00 inches, 3″Pines 2 with Split-Die Tube/Pipe Bender, PINES horizontal Extrusion/tube bending machine-Recontrolled-Model: #2 Serial: 11200-90104:, Maximum bending capacity:Round tube (non-ferrous): 3″ x.188″ wallRound tube (stainless steel): ...more
3" Pines #2 Semi-Automatic Tube Bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 2
Product, Stock Number AM23068 Brand Pines Capacity 3.00 inches, 3″ Pines #2 Semi-Automatic Tube Bender, PINES horizontal mandrel tube bending machine with tube positioning carriage-Recontrolled-Model: #2 Serial 11235-95075Capacities:, Maximum bending capacity:Round tube (non-ferrous): 3″ x.188″ ...more
3" Pines #2, horizontal mandrel tube bender, clock wise
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 2
3″ Pines #2 Tube Bender, Pines horizontal mandrel tube bending machine Used Model: #2 Capacities:, Maximum bending capacity: Round tube (non-ferrous): 3” x.188” wall Round tube (stainless steel): 3” x.065” wall Round tube (mild steel): 3” x.109” wall Square tube: 2-1/2” ...more
3" Pines #2, tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 2
Product, Stock Number AM22163 Brand Pines Capacity 3.00 inches, Pines horizontal mandrel tube bending machine, Model: #2:, Maximum bending capacity:Round tube (non-ferrous): 3” x.188” wallRound tube (stainless steel): 3” x.065” wallRound tube (mild steel): 3” x.109” wallSquare tube: ...more
3" Pines #2, pipe bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 2
Product, Stock Number AM21789 Brand Pines Capacity 3.00 inches, Pines horizontal mandrel tube/pipe bending machine, Model: #2, Capacities:, Maximum bending capacity:– Round tube (non-ferrous): 3″ x.188″ wall, – Round tube (stainless steel): 3″ x.065″ wall, – Round tube (mild ...more
3" SMS #200 Tube Bender With Mandrel & CAB Controls
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Sms
Model: 200
Product, Stock Number AM22399 Brand Eaton Leonard Capacity 3.00 inches, Eaton Leonard horizontal mandrel type tube bending machine, Model: Vector Bendit:, Maximum tube diameter: 3″ ODAutomatic and manual mode Includes:, Machine mounted operator controls 5 HP blower.
3.5" Alpine #AB89NCL, tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Alpine
Model: AB89NCL
3.5″ Alpine AB89NCL Tube Bender, Alpine NC horizontal mandrel type tube bending machine Used Model: AB89NC Capacities:, Maximum tube diameter: 3.5″ OD x.157″ WT Maximum centerline radius: 14″ Maximum length over mandrel: 102″ Maximum bend radius: 180° + springback Bending rotation: ...more
3.5" Baileigh #MB90NCE2 Tube Bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Baileigh
Model: MB90NCE2
3.5″ Baileigh MB90NCE2 Tube Bender, Baileigh 2-Axis horizontal mandrel tube bending machine Capacities:, Minimum tube diameter:.375” OD Maximum tube diameter: 3.5” OD x.157″ WT (mild steel) Maximum degree of bend: 180° + springback Maximum bend centerline radius: 13″ Maximum tube ...more
5.5" Clark & Lewis #CL-310, hydraulic, right hand rotation, DBC-100 10 stop dial bend Control
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Clark & Lewis
Model: CL-310
Product, Stock Number AM16869 Brand Clarke & Lewis Capacity 5.50 inches, Clarke & Lewis heavy duty horizontal mandrel type hydraulic tube bender, Model: CL-310Maximum tube diameter (mild steel): 5-1/2” OD x.095”Maximum tube diameter (non-ferrous): 5” OD x.156”Maximum tube diameter ...more
6" Horn Machine Tools #4, tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Horn
Model: 4
Product, Stock Number AM21217 Brand Horn Machine Tools Capacity 6.00 inches, 6″ Horn Machine Tools #4 Tube Bender, Model: #4 Serial: 11L45418Capacities:, Minimum bending capacity: 1/2″ (approx.)Maximum bending capacity:Round tube (non-ferrous): 6” x.250” wallRound tube (stainless steel): ...more
6" Pines #4, tube bender, 6" OD x .165" WT mild steel, 132" approx. tube length
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 4
Product, Stock Number AM18540 Brand Pines Capacity 6.00 inches, Pines horizontal heavy duty mandrel type tube bending machine, Model: #4Maximum bending capacity:Round Non-Ferrous: 6” OD x.250” wallRound Mild steel: 6” OD x.165” wallRound Stainless steel: 4-1/2” OD x.250” wallRound ...more
6" Pines #4, tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 4
Product, Stock Number AM21045 Brand Pines Capacity 6.00 inches, 6″ Pines #4 Tube Bender, Pines horizontal heavy duty tube and pipe bending machineModel: #4:, Maximum bending capacity:Round Non-Ferrous: 6” OD x.250” wallRound Mild steel: 6” OD x.165” wallRound Black iron pipe: 4” ...more
6" Pines #4 Tube Bender w/ Mandrel, Digital Controls, Overhead Tie, PDA
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 4
Product, Stock Number AM20251 Brand Pines Capacity 6.00 inches, Pines horizontal heavy duty mandrel-type tube & pipe bending machine, Model: #4:Maximum bending capacity: 6″ OD x.165 WT SteelMaximum tube length over mandrel: 96″ (approx.)Maximum degree of bend: 180° + springbackMaximum centerline ...more
8" (200mm) Hines #800NC, tube bender, hydraulic mandrel extractor, pressure die assist, 2012
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Hines
Model: 800NC
Year: 2012
Product, Stock Number AM20625 Capacity 8.00 inches, 8″ (200mm) Hines #800NC Tube Bender – New in 2012, Maximum tube diameter: 8″ (200mm) OD x.250WTMaximum pipe diameter: 6″ Sch 80 (6.625″OD x.432″WT)Standard maximum radius: 22″ Maximum bend angle: 190°Maximum tube length ...more
8" Pines #6, horizontal heavy duty mandrel tube & pipe bender, counter clock wise
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 6
Product, Stock Number AM23217 Brand Pines Capacity 8.00 inches, 8″ Pines #6 Tube Bender, Pines horizontal heavy duty mandrel Tube and Pipe bending machine used AM23217Model: #6Capacities:, Tube: 8” x.375” wall (non-ferrous)Tube: 8” x.250” wall (mild steel)Tube: 8” x.172” wall ...more
8" (200mm) Pines #6, horizontal heavy duty tube bender, mandrel, pressure die assist
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 6
Product, Stock Number AM20658 Brand Pines Capacity 8.00, Pines horizontal heavy duty mandrel pipe and tube bender, Model: #6Maximum tube diameter: 8″ (200mm) ODMaximum pipe size: 6″ SCH 80Maximum tube length over mandrel: 144 (approx.)Maximum degree of bend: 180° + springbackMaximum centerline radius: ...more
8" Wallace #506, horizontal pipe & tube bender
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Wallace
Model: 506
8″ Wallace 506 Tube Bender, Wallace horizontal pipe & tube bender Used Model: 506 Capacities:, Maximum tube diameter: 8″ OD Maximum pipe diameter: 6″ Sch. 80 Maximum degree of bend: 180° + springback Bending rotation: right hand (clockwise) Maximum centerline radius: 48″ Includes: ...more
12" Pines #RotoForm, 5-12 roll extrusion bending machine, automatic roll extrusion forming principle
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: ROTOFORM
Product, Stock Number AM21672 Brand Pines Capacity 12.00 inches, 12″ Pines Roto Form Extrusion Bending Machine, PINES Roto Form 172 Roll Extrusion Bending Machine-used-Model: 172 – Roto Form Serial: 69079:, Pipe Capacity (IPS): 5″ – 12″Minimum tube/pipe ID: 4.9375″Maximum ID: ...more
Hydraulic Pipe Panel Bending Press
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Warren, OH
Hydraulic Pipe Panel Bending Press-used-, Capacities:, Used for bending tube/pipe panels into shapes Includes:, Hydraulic system Bending press and oversize table Work positioning jib crane 15 HP, 3 phase motor.
Tube and Pipe Cut Off Machines
17 Results
.062" -312" RMG #15 Straighten & Cut Machine
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Warren, OH
Mfr: Rmg
Model: 15
RMG Wire Straighten & Cut machine-used-, Model: #15, Minimum capacity:.062" Maximum capacity: 312" Minimum part length: 3" Maximum part length: 240" Includes:, Push button control 10 HP motor DISCOUNTED PRICE, AS PICTURED, LOADED ON TRUCK, FOB CLEVELAND, OHIO.
3/4" Tridan #STQC-4, hi-prod.double sided round tube cutoff,chipless rotary cutoff head
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Tridan
Model: STQC-4
Product, Stock Number AM13421 Brand Tridan Capacity 0.75 inches,.75″ Tridan STQC-4 Tube Cut-Off Machine Tube Forming, TRIDAN high production double sided round tube cutoff machineused Model: STQC-4 Serial: 8507 Capacities:, Maximum tube OD: 3/4" Non-Ferrous Maximum tube wall thickness:.049" Material: Copper ...more
1-1/8" Burr Oak #M5, tube cutoff, end former, 2 plane tube straightener, adj pull-apart
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Burr Oak
Model: M5
Product, Stock Number AM19587 Brand Burr Oak Capacity 1.13 inches, 1-1/8″ Burr Oak M5 high-production/high-precision round tube cut-off machine, Maximum tube OD: 1-1/8″Minimum tube OD:.0625″Maximum tube wall thickness: 0.125″Materials: copper, aluminum, brass, steel or stainless steelIncludes a ...more
1-1/4" Bertollette #415, tube straightener and cut-off, push button pedestal ctrl, hyd power unit
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Bertollette
Model: 415
Bertollette tube straightening / cutoff machine with Hydraulic end forming inline, Model: 415 :, Maximum tube diameter: 1-1/4" (32mm) OD Includes:, Push button pedestal control Hydraulic power unit Allen Bradley controls Straightening rolls.
2" Continental #2A, tube cut-off
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Continental
Model: 2A
Product, Stock Number AM20837 Brand Continental Capacity 2.00 inches, Continental semi-automatic roll type tube cutoff machine, Model: 2A, Material: Copper, Aluminum, Brass, Steel, Stainless & TitaniumMaximum cutting diameter: 2” ODMinimum cutting diameter: 1/4” OD, Includes:, Power down feed with ...more
2-1/4" Modern #2LD, tube cut-off with material infeed system
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Modern
Model: 2LD
MODERN automatic high production tube cut-off system with material infeed system–used–, Model: 2LD : Capacity: Maximum tube diameter: 2-1/4" OD Minimum tube diameter: 1/4" OD Spindle Speed: 196-3,027 RPM Includes: Allen Bradley PLC & operator interface control system Long roller type material infeed ...more
2.55" Sinico Sin-0-Matic #TOP2000, CNC cutting machine, twin spindle, 2004
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Warren OH, OH
Mfr: Sinico
Model: TOP2000
Year: 2004
SINICO TOP 2000 Twin Opposed Spindle Milling, Drilling and Cut to Length System-used-, Model: Sin-O-Matic TOP2000 Serial: 1279-0305 New in 2005!, (per mfg literature):, Maximum Capacity: 3.14"OD (80mm) Minimum Capacity: 0.50"OD (15mm) Maximum cut length: 13.39" (340mm) Maximum bar/tube length: 255.9" (6,500mm) Minimum ...more
2.55" Sinico Sin-0-Matic #TOP2000, CNC cutting machine, twin spindle, 2004
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Warren, OH
Mfr: Sinico
Model: TOP2000
Year: 2004
SINICO TOP2000CSV Twin Opposed Spindle Milling, Drilling and Cut to Length System-used-, Model: Sin-O-Matic TOP2000CSV Serial: 1250-0704 New in 2004!, (per mfg literature):, Maximum Capacity: 3.30"OD (84mm) Minimum Capacity:.5"OD (12mm) Maximum cut length: 13.39" (340mm) Maximum bar/tube length: 255.9" (6,500mm) ...more
3" Addison McKee #FM-70 TTPN, tube cut-off
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-70
Product, Stock Number AM22128 Brand Addison McKee Capacity 3.00 inches, 3” Addison McKee #FM-70 TTPN Tube Cut-Off, ADDISON McKEE single cut tube shearing / cutoff machine with pre-notch -used-Model: FM-70 TTPNCapabilities Include:, Capabilities of single cut operations for:Radius end trimAngle end ...more
3" Addison McKee #PF-70-TT, tube cut-off
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: PF-70-TT
Product, Stock Number AM19298 Brand Addison McKee Capacity 3.00 inches, 3″ Addison McKee PF-70 TT single-cut type tube shearing / cut-off machine, Capable of single cut operations for radius end trim, angle end trim, parting off operations, miter cuts, scallop cutsAccepts industry standard clamps and cutter ...more
3" Eagle #TC-2000, tube end cutoff machine, capable of single cut operations, parting-off operations, miter cuts, Allen-Bradley controls (2)
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: TC-2000
Product, Stock Number AM14435 Brand Eagle Capacity 3.00 inches, 3″ Eagle #TC-2000 Tube Cut-Off Machine, Capable of single-cut operations for radius end trim, angle end trim, parting-off operations, miter cuts, and scallop cutsFully-integrated hydraulic systemAllen Bradley electrics.
3" Hautau #SC30, dual blade tube shear cut-off, AB PLC, mounted controls, Indramat tube fdr
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Hautau
Model: SC30
Product, Stock Number AM16205 Brand Hautau Capacity 3.00 inches, 3″ Hautau SC30 Tube Cut-Off, Hautau Dual Blade Tube Shear Cut-offUsed Model: SC30Serial: 365Capabilities:, Cutting/Trimming to length of round and shaped tubesMaximum Tube OD: 3”Maximum Tube dimensions Square: 2.375″Minimum Tube OD: ...more
6" GWS #TM600, tube cut-off machine, Allen Bradley electrics
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Gws
Model: TM600
Product, Stock Number AM20253 Brand GWS Capacity 6.00 inches, 6″ GWS #TM600 Tube Cut-Off Machine, GWS tube end shearing / trimming / cutoff machine–used–Model: TM600 Serial: TDR181TMCapabilities:, Minimum tube diameter: 1″ (approx.)Maximum tube diameter: 6″ ODQuick Change toolsDouble cut ...more
Birkestrand #Supercutter-K400, semi-automatic roll type tube coutoff machine
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Warren, OH
Mfr: Birkestrand
Model: SUPERCUTTER-K400
BIRKESTRAND Semi-Automatic roll type tube cutoff machine - used, Model: “Supercutter” K400, Capacities:, Tube: 1/2” – 4-1/2” OD Pipe: 1/4” – 4” {standard pipe size} Wall thickness:.015” -.337” Includes:, Air powered cutter head down-feed Adjustable end-stop ...more
Haven #811, high production fully automatic double cut type tube cut off machine
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Haven
Model: 811
Haven high production fully automatic double cut type tube cutoff machine, Model: #811 Capacities:, Cutting capacity (Round): Minimum OD: 0.187” (5mm) Maximum OD: 1.50” (38mm) Cutting capacity (Square): 1” (25mm) Maximum tube wall thickness:.094” (2.4mm) Maximum cut length: 96” (with ...more
JDRM #BZ02-6.35-9.52, high production 4 head fully automatic round tube cut off machine
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Jdrm
Model: BZ02-6.35-9.52
JDRM high production four head fully automatic round tube cut-off-used, Model: BZ02-6.35-9.52 Capacities:, Minimum Diameter:.196"OD (5mm) Maximum OD:.075"OD (19.05mm) Maximum Wall Thickness:.040" (1mm) Maximum cut length: No limit Cutting Speed: 6 cuts a minute :, Chipless rotary head assemblies Two-Plane tube ...more
Whitman, tube shear / tube cut-off
Category: Tube and Pipe Cut Off Machines
Seller: AM Industrial
Location: Brook Park, OH
Product, Stock Number AM22053 Brand Other Capacity 2.50 inches, 2.5″ Whitman Tube Shear Tube Cut-Off.
Tube End Finishing and Forming Machines
33 Results
.34" Tube Fabrication Equipment #JF-4000, Tube End Swager
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Tube Fabrication Equipment
Model: JF 4000
Product, Stock Number AM23020 Brand Tube Fabrication Equipment Capacity 0.34 inches,.340″ TFE JF 4000 Tube End Swager Tube Forming, TFE Inc JF 4000 Elastomeric & Aerospace Type Tube End SwagerModel: JF 4000:, Elastomeric & Aerospace Type Swage MachineFully Automatic clamping & unclamping of the ...more
3/8" Torrington Vaill #61-23, air operated double stroke, 2 -hit vertical shuttle, foot switch
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Torrington
Model: 61-23
Product, Stock Number AM19132 Brand Torrington/Vaill Capacity 0.38 inches, 3/8″ Torrington Vaill #61-23 air operated double stroke type tube end forming machine, 2-hit capabilities using vertical shuttleMinimum tube OD: 1/8″Maximum tube OD: 3/8″Work stroke: 1/4″Tonnage: 2.5 tonsGross ...more
3/4" Wauseon #2102, high production, roll grooving, 2.5 ton clamp, Allen Bradley PLC
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Wauseon
Model: 2102
Product, Stock Number AM17977 Brand Wauseon Machine Capacity 0.75 inches, 3/4″ Wauseon 2102 high production rotary type tube end finishing machine, Capable of tube end finishing, roll grooving, beading, and forming2 ton tool close force2-1/2 ton tube clamp forceHydraulic tube clamping systemAllen Bradley PLC and ...more
1.5" Wauseon #2301, tube end finisher, spindle, clamp, flag, machine mounted push button controls
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Wauseon
Model: 2301
Product, Stock Number AM14629 Brand Wauseon Machine Capacity 1.00 inches, Wauseon rotary type tube end finishing machine, Model: 2301, Capabilities:, Tube end finishing / roll grooving / beading / forming:, Tube Hydraulic clamping systemMachine mounted push button controls.
2" Parker #232P, tube end finisher, 37° & 45° flaring capacity, beading & deburring
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Parker
Model: 232P
Product, Stock Number AM19133 Brand Parker Hannifin Capacity 2.00 inches, Parker tube deburring machine, Model: 232Maximum tube OD: 2”Deburring and ChamferingVariable speed driveAdjustable feed depthQuick-change tooling colletsLever-operated infeed.
3" Eagle #CE, tube end former, double head, expanding, reducing, slotting, notching, AB PLC
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: CE
Product, Stock Number AM17265 Brand Eagle Capacity 3.00 inches, 3” Eagle #CE double head tube end former, Capable of expanding, reducing, slotting, notching, piercing, vise & ram formingMachine mounted operator controls with Allen Bradley PLCAccepts industry standard tooling.
3" Eagle #EE-2000, double head vise & ram type tube end former, Allen Bradley PLC
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: EE-2000
Product, Stock Number AM19321 Brand Eagle Capacity 3.00 inches, 3” Eagle #EE-2000 double head vise & ram type tube end forming machine, Capable of: expanding & reducing (C-Type tooling)Vise & ram forming (E-Type tooling)Double head – allows for (2) tooling sets to be set-up at onceAllen Bradley ...more
3" Eagle #EFEF (Face & Flare), double head, accepts standard tooling
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: EFEF
Product, Stock Number AM10998 Brand Eagle Capacity 3.00 inches, Eagle double head vise & ram tube end forming machine, Model: EFEF (face & flare), Expanding, Reducing (C-type tooling) or E type toolingRotary Finishing & Chamfering (EF-type tooling – “High Speed” spindle)Rotary Flaring ...more
3" Leonard Conrac #3CP, tube end finisher
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Leonard
Model: 3CP
Product, Stock Number AM22286 Brand Leonard Capacity 3.00 inches, 3” Leonard Conrac #3CP Tube End Finisher, Leonard / Conrac semi-automatic tube end finishing machine with pneumatic clampingModel: 3CP:, Flaring, beading, squaring & deburring via quick-change clamp jaw and work head assemblies. (Not ...more
3" Manchester #M82H3, tube end former, guarding, toggle clamp, automatic lube
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Manchester
Model: M82H3
Product, Stock Number AM20435 Brand Manchester Tool & Die Capacity 3.00 inches, 3” Manchester #M82H3 multi-hit rotary shuttle hydraulic vise & ram tube end forming machine, High speed vise & ram forming / single flaring / double flaring / beading / expanding / reducingTube working OD: 1/8″ ...more
3" McKee Addison #FM-70 RF+RS-VS, tube end former, large capacity, ram form & rotary spin
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Mckee
Model: FM-70
Product, Stock Number AM13802 Brand Addison McKee Capacity 3.00 inches, 3″ Addison McKee FM-70 RF+RS-VS Tube End Former, ADDISON McKEE ADDISON large capacity single head hydraulic tube end sizing & forming machine-usedModel: FM-70 RF+RS+RS-VS Serial: J042281Capabilities Include:, Max Diameter: 3″ ...more
3" PHI #3CPV, manual tube end finishing machine with pneumatic clamping, variable speed spindle drive
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Phi
Model: 3CPV
Product, Stock Number AM23364 Brand PHI Capacity 3.00 inches, 3″ PHI 3CPV Tube End Finishing Machine, PHI manual tube end finishing machine with pneumatic clampingUsed Model: 3CPV-HDCapabilities include:, Flaringsquaring & deburring via quick-change clamp jaw and work head assembliesBeading ...more
3" (76mm) Upland Technologies #TUCL-70, single head high production tube end former
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Upland Technologies
Model: TUCL-70
Product, Stock Number AM20600 Brand Eagle Capacity 3.00 inches, Upland Technologies single head high production tube end forming machine, Model: TUCL-70, Capacities:, Maximum tube diameter: 3″ (76mm) ODIncludes:, Machine mounted push button control.
3" Lakeland #P248, tube flaring & bending machine
Seller: AM Industrial
Location: Brook Park, OH
Model: P248
Product, Stock Number AM22500 Brand Lakeland Capacity 3.00 inches, 3″ Lakeland P248 Tube End Finisher, 3″ Lakeland Tube End FinisherModel: P248:, Maximum tube diameter: 3″ ODIncludes:, Deburring Head.
3-1/2" BEMA #BS12x6, high production heavy duty tube end formerBEMA CNC operator Control station
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Bema
Model: BS12X6
Product, Stock Number AM17341 Brand BEMA Capacity 3.50 inches, 3.5″ BEMA #BS 12×6 high-production heavy-duty tube end former, Capable of working with tube up to 3.5″ ODSix hit capabilityCapable of flaring, reducing, rolling, beading, facing, chamfering, closing or threadingServo driven rotating ...more
3-1/2" Dickey #3.5, hydraulic rotary tube end former, single & double beads, vise
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Dickey
Model: 3.5
Product, Stock Number AM15177 Brand Dickey Capacity 3.50 inches, 3.5″ Dickey rotary tube end beading, forming, and flaring machine, Vertical vise designIntegrated hydraulic systemMachine-mounted operator control stationTwo-hand cycle start pedestal.
4" Addison McKee #FM-100RS, single head tube end former, machine mounted Control with AB PLC
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-100RS
Product, Stock Number AM19341 Brand Addison McKee Capacity 4.00 inches, 4″ Addison McKee #FM-100 RS single-head tube end forming machine, Vise and ram forming, rotary flaring, custom forming, segmented finger and jaw forming (ER type)12″ tooling pocket widthMachine-mounted operator controls with Allen ...more
4" Torrington Vaill #511, rotary tube end former, 3" clamp stroke, automatic lube
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Torrington
Model: 511
Product, Stock Number AM17635 Brand Torrington/Vaill Capacity 3.50 inches, 3.5″ Torrington Vaill #511 Rotary Tube End Former, TORRINGTON VAILL rotary high production tube end forming machine-used-Model: 511Capabilities include:Maximum Tube OD: 3.5″ODMinimum Tube OD: 1″ODForming flanges, flaring ...more
4" Torrington Vaill #511, tube end former, 3" clamp stroke, automatic lube
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Torrington
Model: 511
Product, Stock Number AM17300 Brand Torrington/Vaill Capacity 4.00 inches, 4″ Torrington Vaill #511 rotary type high-production tube end forming machine, Capable of flanging, flaring, beading, expanding and threading tube in any combination of operations – within a limit of threeCapable of working with ...more
4" Torrington Vaill #511, rotary tube end beading, former & flaring machine, vertical vise design
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Torrington
Model: 511
Product, Stock Number AM20186 Brand Torrington/Vaill Capacity 4.00 inches, Torrington Vaill 511 Tube End Former, TORRINGTON VAILL rotary tube end beading, forming & flaring machine-usedModel: 511 Serial: N69Capabilities include:, Minimum OD:.750″Maximum OD: 4″ (approx.)Forming single & double ...more
6" Addison McKee #FM-150 RS+RS, tube end former, 12" stroke, Allen Bradley electrics
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-150
Product, Stock Number AM19571 Brand Addison McKee Capacity 6.00 inches, Addison McKee form master large capacity double head hydraulic tube end forming machine, Model: FM-150 RF+RFMaximum tube diameter: 6″ OD12″ StrokeVise and Ram-formingRotary end finishingIncludes:Machine mounted operator controlsFlag ...more
6" Addison McKee #FM-150, ID/OD single head hydraulic tube end former, AB PLC
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-150
Product, Stock Number AM22013 Brand Addison McKee Capacity 6.00 inches, 6″ Addison McKee FM-150 ID/OD Tube End Former, ADDISON MCKEE form master large capacity single head hydraulic tube end forming machine-usedModel: FM-150 IDODSerial: 63483Capacities:, Maximum tube diameter: 6″ ODMinimum tube diameter: ...more
6" Addison McKee #FM-150RF, large capacity hydraulic tube end former, expanding/reducing
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-150RF
Product, Stock Number AM22131 Brand Addison McKee Capacity 6.00 inches, 6″ Addison McKee FM-150 RF Tube End Former, Capabilities:, Maximum tube OD: 6” (150 mm)Minimum tube OD: 1″ (approx.)Expanding/Reducing/Beading/Flaring/FlangingVise and Ram FormingIncludes:, Allen Bradley PLC and related ...more
6" Dickey #6000, rotary type tube end finisher
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Dickey
Model: 6000
Product, Stock Number AM17298 Brand Dickey Capacity 6.00 inches, 6″ Dickey 6000 Tube End Former, 6” Dickey 6000 rotary type tube end trimmingflaringforming & beading machineforms single & double beadsopen end flare in tubescustom rotary formingtube end trimmingmaximum tube diameter: 6”minimum ...more
6" Dickey #6000, tube end former
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Dickey
Model: 6000
Product, Stock Number AM23262 Brand Dickey Capacity 6.00 inches, 6″ Dickey 6000 Tube End Former, Dickey rotary type tube end trimmingFlaringForming & beading machine Low-CostModel: 6000Capacities:, Maximum tube diameter: 6.000” – standardMinimum tube diameter: 0.750” – standardForming ...more
6" Eagle #E, tube end former
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: E
Product, Stock Number AM22483 Brand Eagle Capacity 6.00 inches, 6″ Eagle E Tube End Former Tube Forming.
6" Eagle #IO-3000, electric CNC single end high production tube end former
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: IO-3000
6″ Eagle IO-3000 Electric CNC Tube End Former, Eagle CNC single head high production tube end forming machine Used Model: I/O-3000 Electric Capabilities:, Minimum Tube OD: 1/2″ Maximum Tube OD: 6″ Expanding / Reducing / Tight tolerance sizing on the inside & outside diameter of tubing Custom ...more
8" Dickey #8000, rotary type tube end former, Allen Bradley PLC & controls (2 available)
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Dickey
Model: 8000
Product, Stock Number AM18934 Brand Dickey Capacity 8.00 inches, 8” Dickey #8000 rotary type tube end flaring, forming and end trimming machine, Capable of forming single & double beads, open end flare in tubes, rotary tube end trimming, custom rotary forming & end closureAllen Bradley PLC & ...more
Addison McKee #FM-60 ATN, end finishing
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-60
Product, Stock Number AM22419 Capacity 3.00 inches, 3″ Addison McKee #FM-60 ATN, Addison McKee tube end notching machineModel: FM-60 ATN:, High production tube end slotting/notchingMaximum Tube OD: 3”Includes:Accepts industry standard “cup and blade type” toolingFootswitch cycle start control.
Burr Oak #VBHB, vertical bend hairpin bender cell, Burr Oak coil feed coil loader, 6 tubes/cycle
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Burr Oak
Model: VBHB
Product, Stock Number AM14306 Brand Burr Oak Capacity 1.00 inches, Burr Oak #VBHB Vertical Bend Hairpin Tube Bender Cell, Includes Burr Oak coil feed coil loader and Burr Oak multi-void tube cut-off machineCapable of bending 6 tubes at time20 HP hydraulic motorVickers hydraulic valvesMachine-mounted push button ...more
Dickey & Sons, rotary type tube end finisher, safety guards
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Dickey
Dickey & Sons rotary type tube end finishing machine, capable of tube end finishing, roll grooving, beading and forming, hydraulic tube clamping system, machine mounted operator controls, safety guards.
Custom Flaring Machine
Seller: AM Industrial
Location: Warren, OH
Automatic tube end flaring machine - used -, Maximum tube diameter: 3/8" (10mm) OD Minimum tube diameter: 1/4" (6.35mm) OD.
Large outside dimension Tube end forming machine - vertical spinning
Seller: AM Industrial
Location: Warren, OH
Large OD End Former--used–, Capabilities Include:, Rotary forming Rotary beading Includes:, Machine mounted controls 230/460 Volt, 3 Phase, 60 Hz.
.75" Pilot #PEF-2, 2-hit end former, expaning/reducing, beading, flaring, machine mounted controls
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Pilot
Model: PEF-2
Pilot 2-hit pneumatic tube end forming machine, Model: PEF-2 Capabilities:, Maximum tube diameter: 3/4" OD Tube End Forming; Expanding/Reducing Beading Flaring Includes:, Machine mounted operator controls 2-hit ram Pneumatically actuated flag stop Heavy duty primary machine frame to increase forming accuracy and ...more
3/4" (20mm) Rosenberger #RU-8 All Electric End Former with RM-1000P Automatic Loader
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Rosenberger
Model: RU-8
Product, Stock Number AM20506 Capacity 0.75 inches, Rosenberger all electric 6-hit end former with automatic loader-used-, Model: RU-8 New in 2013!Capacities:, Maximum tube diameter: 3/4″ (20mm) OD6-hit ramIncludes:, Machine mounted controlsTouchscreen programming stationParker servo drivesVertical tool ...more
1" Crown Unlimited Machine, vise and ram type tube end forming, expanding, flaring, reducing machine, Late model
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Crown
Product, Stock Number AM22176 Brand Crown Unlimited Machine Capacity 1.00 inches, 1″ Crown Unlimited Machine Tube End Former, 1” Crown Tube End FormerDouble & single flaringAssortment of toolingLate model.
1" Manchester, high production rotary type roll former, end finisher, roll grooving, tapering
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Manchester
MANCHESTER high production rotary type roll former, Maximum tube diameter: 1" OD Maximum Jaw Opening: 1.25" Clamp Force: 2.5 Tons Cycle Time: 4 seconds (depending on application) Capabilities: End-finishing, Roll Grooving, Tapering, Custom Forms Includes:, Machine mounted push button operator controls Allen Bradley ...more
1" Coilco, tube end closer, w/tooling assortment
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Product, Stock Number AM22177 Brand CoilCo Capacity 1.00 inches, 1” Coilco Tube End Closer, COILCO SPINCLOSER® Tube end closing machine–used–AM18901Model: 48Capacities:, Max tube diamter:Standard: 1-3/8″Optional: 1-5/8″Max tube length: 48″ (can be extended)Steel type: ...more
1.5" Sierracin / Harrison Torkplus, roller swager tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Product, Stock Number AM22028 Brand Eaton Leonard Capacity 1.50 inches, 1.5″ Eaton Torkplus / Harrison Roller Swager Tube End Former, EATON TORKPLUS / Harrison Dual Mode Roller Swaging Machine-used-Model: 6777 Serial: 104Capacities:, Capable of internally swaging tubes to fittings – by torque control or ...more
2" BEMA #PAN-10.6, tube end former, 6-hit machine, expand/reduce/bead, automatic lube system
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Bema
Model: PAN-10.6
Product, Stock Number AM17343 Brand BEMA Capacity 2.00 inches, BEMA #PAN-10.6 Tube End Former, 6 hit machineCapable of expandingReducing, beading and flaringAlubrication systemMachine mounted controls with 2 hand cycle start.
2" Fenn #8, end former, machine mounted controls, parts counter, footswitch cycle start
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Fenn
Model: 8
Model: #8 Serial: 51368, Capabilities (per mfg. ):, Expanding / Reducing / Beading / FlaringMaximum tube OD (aluminum): 2" x.049"Maximum tube OD (carbon steel): 1" x.049"Maximum tube OD (stainless steel): 3/4" x.049"Clamp pressure: 11,000 lbs. Ram pressure: 7,800 lbs.Maximum work stroke: 4"Includes:, Machine mounted ...more
3" Addison McKee #EF-70 IDOD Tube End Former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: EF-70
Product, Stock Number AM15454 Brand Addison McKee Capacity 3.00 inches, 3″ Addison McKee EF-70 IDOD Tube End Former, ADDISON McKEE “Electriform” single head tube end sizing machine–RefurbishedModel: EF-70 IDOD Serial: 68995Capabilities:, Maximum Capacity: 3″OD (approx.)Minimum Capacity: ...more
3" Addison McKee #FM-70, dual IDOD Digiform tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-70
Product, Stock Number AMADDISONFM-70 Brand Addison McKee Capacity 3.00 inches, 3″ Addison McKee #FM-70 Dual IDOD Digiform Tube End Former, Capabilities include tight tolerance sizing on ID & OD of tubeCustom beading & forming on ID & OD of tubeAccepts industry standard “drop-in” ...more
3" Addison McKee #FM-70RF, long stroke tube end former, single hit hydraulic vise & ram
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-70RF
Product, Stock Number AM19305 Brand Addison McKee Capacity 3.00 inches, 3″ Addison McKee FM-70 RF long stroke single hit hydraulic vise & ram tube end forming machine, Vise / ram forming & segmented tooling capabilities: expand / reduce, vise & ram formingAccepts industry standard tooling – RF ...more
3" Addison McKee #FM-70RF+RS+RS-VS, large capacity single head hydraulic tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: FM-70RF+RS+RS-VS
Product, Stock Number AM17091 Brand Addison McKee Capacity 3.00 inches, 3″ Addison McKee FM-70 RF+RS-VS Tube End Former, Addison McKee large capacity single head 2-Hit hydraulic tube end sizing and forming machineUsed Model: FM-70 RF+RS-VSSerial: JO41736Capabilities:, Custom end formingExpanding / ...more
3" Addison McKee #PF-70, ID/OD tube end former, single head, Allen Bradley PLC
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Model: PF-70
Product, Stock Number AM19344 Brand Addison McKee Capacity 3.00 inches, 3” Addison McKee PF-70 IDOD single head tube end sizing machine, Capabilities include tight tolerance sizing on ID & OD of tubeCustom beading & forming on ID & OD of tubeAccepts industry standard “drop-in” ...more
3" Addison FM-70, ID/OD tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Addison
Product, Stock Number AM22130 Capacity 3.00 inches, 3” Addison FM-70 ID/OD RS+RS Tube End Former, Addison McKee double head tube end sizing machineModel: FM-70 ID/OD RS+RSCapacities:, Maximum tube diameter: 3″ ODTight tolerance sizing on ID and OD of tubeCustom beading & forming on ID and OD of ...more
3" Aristo #A-680, tube former, expanding/reducing/flaring/beading/dimpling, Allen Braldey PLC
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Aristo
Model: A-680
Aristo Machine tube end sizing & forming machine, Model: A-680 Maximum Tube OD: 3” Tooling Pocket Width: 7-3/4” Expanding/Reducing/Flaring/Beading/Dimpling Tight tolerance custom beading & forming on the inside & outside diameter of tubing Remote foot switch control Accepts industry standard ...more
3" Eagle #C, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: C
Product, Stock Number AM22359 Brand Eagle Capacity 3.00 inches, 3” Eagle C Tube End Former, Eagle single head tube end forming machineModel: CExpandingReducingSlotting, notching, and piercingMaximum tube OD: 3”Accepts industry standard drop-in type toolingFootswitch cycle startFully integrated hydraulics.
3" Eagle #C-C-E2000, multi-headed tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: C-C-E2000
Product, Stock Number AM12825 Brand Eagle Capacity 3.00 inches, 3″ Eagle C-C-E 2000 Tube End Former, EAGLE Triple head tube end forming machine–refurbishedModel: C-C-E 2000 Serial: 553860Capabilities:, Minimum Diameter: 1/2″ODMaximum Diameter: 3″ODExpanding / ReducingVise & Ram ...more
3" Eagle #CEF, double head, expanding/reducing/slotting/notching/piercing, rotary flaring, open end radius ball forming, vise & ram forming
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: CEF
Product, Stock Number AM17348 Brand Eagle Capacity 3.00 inches, 3” Eagle CEF tube end former, double head, expanding, reducing, slotting, notching, piercing, rotary flaring, open end radius ball forming, vise & ram forming, accepts industry standard tooling.
3" Eagle #EEE, triple head vise & ram tube end, expanding/reducing, Allen Bradley PLC
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: EEE
Product, Stock Number AM16769 Brand Eagle Capacity 3.00 inches, 3″ Eagle EEE triple head hydraulic vise and ram type tube end forming machine, allows for (2) independent forming operations all on common machine base, each with the following capabilities: Vise & Ram Forming – flaring & custom ...more
3" Eagle #I/O, vertical single head tube end former, tight tolerance sizing, Standard electric
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: I/O
Product, Stock Number AM10148 Brand Eagle Capacity 3.00 inches, 3″ Eagle Vertical I/O Tube End Former, ExpandingReducingTight tolerance sizing / resizing on the inside & outside diameterCustom beading & forming on the inside & outside diameter of tubingRemote foot switch controlAccepts industry ...more
3" Eagle #I/O-2000 Tube End Former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: I/O-2000
Product, Stock Number AM23092 Brand Eagle Capacity 3.00 inches, 3″ Eagle I/O-2000 Tube End Former, Eagle IO single head high production tube end forming machineUsed Model: IO-2000Serial: 3218Capacities:, Minimum tube diameter: 1/2″Maximum tube diameter: 3″ ODCapable of expanding/reducingTight ...more
3" Eagle #IO, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eagle
Model: IO
3″ Eagle IO Tube End Former, Eagle single head high production tube end forming machine Used Model: IO Serial: 2427 Capabilities:, Minimum tube OD: 1″ (approx.) Maximum tube OD: 3” Expanding / Reducing Tight tolerance sizing / resizing on the inside and outside diameter of tubing Custom beading and ...more
3" Eagle #IO-IO-IO-2000 Tube End Former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: IO-IO-IO-2000
Product, Stock Number AM22425 Brand Eagle Capacity 3.00 inches, 3 ” Eagle IO-IO-IO-2000 Tube End Former, 3″ Eagle triple head tube end forming & sizing machineModel: IO/IO/IO 2000Capabilities Include:Triple head configuration – allows (3) tooling sets to be setup for operation at all ...more
3" Eagle #IO/IO, tube end former & sizer, double head configuration, expanding & reducing
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: IO/IO
Product, Stock Number AM16310 Brand Eagle Capacity 3.00 inches, 3″ Eagle IOIO Tube End Former, Eagle double head tube end forming & sizing machineUsed Model: IOIOSerial: 3157Capabilities Include:, Capacity: 1″ – 3” (approx.)Double head configuration – allows (2) tooling sets to be ...more
3" Eagle #IO/IO-2000, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eagle
Model: IO/IO 2000
3″ Eagle IO/IO 2000 Tube End Former, Eagle Double Head Tube End-Forming Machine Used Model: IOIO-2000 Serial: 770405 Capabilities:, Minimum tube OD: 1/2″ (approx.) Maximum tube OD: 3” Expanding / Reducing Tight tolerance sizing / resizing on the inside and outside diameter of tubing Custom beading ...more
3" Eagle #IO2000, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eagle
Model: IO2000
3″ Eagle IO2000 Tube End Former, Eagle single head high production tube end forming machine Used Model: IO-2000 Serial: 770305 Capabilities Include:, Minimum Diameter: 1″ (approx.) Maximum Diameter: 3″ OD Expanding / Reducing Tight tolerance sizing / resizing on the inside and outside diameter of ...more
3" Eagle #IO2000, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eagle
Model: IO2000
3″ Eagle IO2000 Tube End Former, Eagle single head high production tube end forming machine Used Model: IO-2000 Serial: 770403 Capabilities Include:, Minimum Diameter: 1″ (approx.) Maximum Diameter: 3″ OD Expanding / Reducing Tight tolerance sizing / resizing on the inside and outside diameter of ...more
3" Eagle #IO2000, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eagle
Model: IO2000
3″ Eagle IO2000 Tube End Former, Eagle single head high production tube end forming machine Used Model: IO-2000 Serial: 554079 Capabilities Include:, Minimum Diameter: 1″ (approx.) Maximum Diameter: 3″ OD Expanding / Reducing Tight tolerance sizing / resizing on the inside and outside diameter of ...more
3" GWS #T6-CNC, tube former, multi-hit vise & ram, expanding/reducing, custom form, 2000
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Gws
Model: T6-CNC
Year: 2000
Product, Stock Number AM11647 Brand GWS Capacity 3.00 inches, GWS 6-Hit CNC tube end forming machine, Model: T6-CNC, Vise & Ram forming via 1 – 6 hit forming cycle using factory equipped tooling shuttle systemExpanding & ReducingFlaringCustom formingTouch screen control system for part setupGWS PowerForm ...more
3" GWS, CNC sizer tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Gws
Product, Stock Number AM20742 Brand GWS Capacity 3.00 inches, GWS large capacity CNC tube end forming machine, Model: Pform 400, Tube end/IDOD sizing & formingExpanding & ReducingCustom forming Maximum tube diameter: 3″ OD GWS PowerForm control programming – windows basedAccepts industry standard ...more
3" Manchester #M82H4 Tube End Former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Manchester
Model: M82H4
Product, Stock Number AM22010 Brand Manchester Tool & Die Capacity 3.00 inches, 3″ Manchester M82H4 Tube End Former, Manchester multi-hit rotary shuttle hydraulic vise & ram tube end forming machineModel: M82H4 (per mfg):, Tube working OD:Maximum: 3″ ODMinimum: 1/8″ ODRam cylinder Stroke: ...more
3" Torrington Vaill #511-105, tube end bead/form/flaring, rotary resizing, tight tolerance
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Torrington
Model: 511-105
Product, Stock Number AM15597 Brand Torrington/Vaill Capacity 4.00 inches, Torrington Vaill rotary tube end beading, forming and flaring machine, capable of Forming single & double beadsopen end flare and spherical ball forms on tube ends, Forms using an eccentric mandrel which rotates inside the tube while the ...more
4" Dickey #4000, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Dickey
Model: 4000
4″ Dickey 4000 Tube End Former, Dickey rotary type tube end flaringForming and end trimming machineUsed Model: 4000Capabilities:, Maximum Tube Diameter: 4″ ODMinimum Tube Diameter: 1″ OD (approx.)Capable of Forming Single & Double BeadsOpen End Flare in TubesRotary Tube End TrimmingFlangingCustom ...more
5" Eagle #F, tube end former, #AM19355
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: F
Product, Stock Number AM19355 Brand Eagle Capacity 5.00 inches, Eagle single head hydraulic operated ram form/spin flare/rotary form tube end forming machine, Model: F, Capabilities:, Expanding – C or E type toolingReducing – C or E type toolingVise and ram forming – E type toolingWide vise design ...more
5" Eagle F Tube End Former Tube Forming
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Product, Stock Number AM21407 Brand Eagle Capacity 5.00 inches, 5″ Eagle F Tube End Former Tube Forming, EAGLE single head hydraulic operated ram form/spin flare/rotary form tube end forming machine-Refurbished-Model: F:, Maximum tube diameter: 5″ (127mm) ODMinimum tube diameter: 1″ OD ...more
6" Dickey #6000, rotary tube end former, forming single & double beads, AB PLC
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Dickey
Model: 6000
Product, Stock Number AM13811 Brand Dickey Capacity 6.00 inches, 6″ Dickey #6000 Rotary Tube End Former, DICKEY rotary type tube end trimming, flaring, forming & beading machine—usedModel: 6000Capacities:, Forming single & double beads, open end flare in tubes, from the inside out by progressive ...more
6" Eagle #RBF, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Eagle
Model: RBF
6″ Eagle RBF Tube End Former, Eagle Rotary Type Tube End Beading Flaring and Forming machine refurbished Model: RBF Serial: 84-302 Capabilities include:, Minimum tube diameter: 1″ (approx.) Maximum tube diameter: 6″ (150mm) Forming beads Flanges and Flares from the inside out by progressive radial ...more
Eagle #IO-EF, tube end former
Category: Tube End Formers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: IO-EF
Product, Stock Number AM22360 Brand Eagle Capacity 3.00 inches, 3″ Eagle IO-EF, Eagle multi-headed tube end sizing & forming machineModel: IO-EFCapabilities:, Tight tolerance sizing on the inside & outside diameter of tubingVise & ram forming – flaring & custom formingExpanding / ...more
Manchester Tool & Die, tube end former, hydraulic power unit, 20 HP
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Manchester
Manchester Tool & Die Tube End Former, Hydraulic Power Unit :, 20 HP Motor 230/460 Volt 60 Hz 3 Phase Electrics Discounted Price, As Pictured, Cycled Under Power, Fob Cleveland, OHIO.
Hydraulic End Former, 48" bed length
Category: Tube End Formers
Seller: AM Industrial
Location: Cleveland, OH
48" Bed Length.
Tube Machinery - Miscellaneous
2 Results
Rand Bright BH-100, Tube Polisher
Category: Tube Machinery - Miscellaneous
Seller: AM Industrial
Location: Warren, OH
Model: RAND BRIGHT BH-100
Rand-Bright [Midwest Sandright] BH-100 OD Tube Polishing Machine - Used - AM23568, Model: BH-100 Serial: 100-250BH100.
Rand Bright Tube Polisher
Category: Tube Machinery - Miscellaneous
Seller: AM Industrial
Location: Brook Park, OH
Model: RAND BRIGHT TUBE POLISHER
Model- BH-100, Serial#- 0603-5227, Electrics- 460V/60/3Ph..
Livernois Engineering Fin #SDLV-1, tube mills
Category: Tube Mills
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Livernois
Model: SDLV-1
Livernois Engineering Fin SDLV-1 Tube Mills, Livernois Engineering Fin Mill Machine :, Automatic Feeding for Fin production from Coil Powered Uncoiler.
Thermatool #TMI-100, Tube mill welder, 1994
Category: Tube Mills
Seller: AM Industrial
Location: Warren, OH
Mfr: Thermatool
Model: TMI-100
Year: 1994
Thermatool Tube mill welder AM22565, Model: TMI- 100 Serial: 1578, CP No: 100KW, Volt Sec- 13,000, Volts PR. 460, Date- 10/31/1994.
Uncoilers and Centering Coil Reels
1 Result
10000 lb. Littell #90-30, Coil Reel, 30" width, 60" outside dimensions, 20"-24" ID, expandable mandrel
Category: Uncoilers and Centering Coil Reels
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Littell
Model: 90-30
10,000 lb x 30” Wide Littell Coil Reel Model #90-30 – Used – AM23547, Model: 90-30, Serial: 89.047-87, Capacity: 10,000-lbI.D. Range 20-24”Max Width: 30”Max O.D: 60”Expandable MandrelAs Pictured.
Honda Engineering Honda #DE75, extruder, twin screw, vacuum pump
Category: Vacuum Pumps
Seller: AM Industrial
Location: Warren, OH
Mfr: Honda Engineering
Model: DE 75
Year: 1900
Honda DE75 Extruder, Twin Screw, Vacuum Pump, Model- DE 75, Serial- 2190.
Vertical CNC Machining Centers
2 Results
Haas #Mini-Mill, 2007
Category: Vertical CNC Machining Centers
Seller: AM Industrial
Location: Warren, OH
Mfr: Haas
Model: MINI-MILL
Year: 2007
Haas Minimill-AM24629, Serial: 1063361 DOM: 12/07, Phase 3/1 Hertz 50/60 Full Load 25/40 AMPS Largest Load 15 AMPS.
Mighty Viper #VMC-9501-AP, Vertical Machining Center, MWS-842 Control, 20 automatic tool changer, 2003
Category: Vertical CNC Machining Centers
Seller: AM Industrial
Location: Warren, OH
Mfr: Mighty Viper
Model: VMC-9501-AP
Year: 2003
Mighty Viper V950 Vertical Machining Center, Model- VMC 9501 AP Serial- 003798, Year- 2003, 20 station tool changer MWS-842 Control 18 X 50" T-Slotted Table.
Miller, electric horizontal welding lathe, with wire feeder
Category: Welding Lathe
Seller: AM Industrial
Location: Warren, OH
Mfr: Miller
Horizontal welding lathe, Miller welding power supply auto axcess 300 and wire feeder. Serial No. ME021839U.
Sundstrand System Automatic Wire bender with uncoiler & shear
Category: Wire Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Sundstrand
Sun System Automatic Wire bender with uncoiler-AM23950, wire uncoilers, Spools of 14Ga. wire.
Wrapping Machines (including Shrink Wrappers)
2 Results
Cousins #LP-SW, Stretch Wrap Machine
Seller: AM Industrial
Location: Warren, OH
Mfr: Cousins
Model: LP-SW
Cousins LP-SW Stretch Wrap Machine, Model- LP-SW Serial- 190612-SL-9626 : 65" dia. Turntable Electric- 115/60/1Ph.
Lantech #SVSA, Pallet Stretch Wrapper, 48" x 48" turntable
Seller: AM Industrial
Location: Warren, OH
Mfr: Lantech
Model: SVSA
Lantech SVSA Pallet Stretch Wrapper, Model- SVSA, Series- Custom, Order- E3739, 48 X 48" Turntable, Elec. 230/60/3Ph..
