Also See: 14 Results
25" x 118" Webb Whacheon #HL-630, 3" bore, 28-1350 RPM,tool post, face plate, 2 Steady Rest, worklight, 6-Jaw chuck, chip tray, Trav-A-Dial on carriage, coolant, #A6828
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Webb
Model: HL-630
Swing Over Bed 24.80" Swing Over Cross Slide 14.96" Swing Over Gap Non-Gap Distance Between Centers 118.11" Spindle Bore 3-1/8" Taper of Spindle Bore M.T. #7 Taper of Center: M.T. M.T. #5 Number Of Spindle Speeds 12 Range Of Spindle Speeds 27 – 1,205 RPM Number of Feed Changes 40 Steps Longitudinal Feed (Z-Axis) ...more
25" x 120" Clausing #25", engine lathe, 15" swing over cross slide, inch/metric, 4-jaw 24" chuck, 1990
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Clausing
Model: 25
Year: 1990
Size 25"x120"cc Make CLAUSING COLCHESTER Year 1990, ONE USED - 25” x 120”cc CLAUSING COLCHESTER Engine Lathe, Model: 25”, Serial Number: 9/0006B/00068DD, New 1990, 25” Swing Over Bedways, 15” Swing Over Cross Slide, Hardways, Taper Turning Attachment, Inch / Metric Threading, Spindle ...more
25" x 120" Daewoo Doosan Ikegai #DA25, hi-speed precison engine lathe, 8" chuck, inch/metric
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Daewoo Doosan
Model: DA25
Year: 1981
Spec Sheet:, 25" x 120" DAEWOO-IKEGAI HIGH SPEED PRECISION, ENGINE LATHE W/TAPER ATTACHMENT, Serial No. 040059, Model DA25, Taper Attachment, 2.2" Hole Thru Spindle, Inch-Metric Threading Capabilities, Threading Dial - Power Rapid Traverse (4-Way), 4-Jaw Chuck w/Jaws - Hardened & Ground Bed Ways, CATALOG :, Hole ...more
25" x 120" Daewoo-Ikegai hi-speed precision #DA25, taper attach, 2.2" hole thru spindle, inch/metric, 4-jaw chuck
Mohawk Machinery Inc | Cincinnati, OH
Category: Engine Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Daewoo Ikegai
Model: DA25
Year: 1981
25" x 120" DAEWOO-IKEGAI HIGH SPEED PRECISION, Manufacturer DAEWOO-IKEGAI Model DA25 Year 1981 Condition Used Serial Number 040059 Stock Number 29514 Hole Thru Spindle 2.2" Swing Over Carriage 15.5" Distance Between Centers 120" (20) Spindle Speeds, Range 25 to 2000 RPM (44) Longitudinal Feeds, Range ...more
25" x 120" Monarch #2516x120, engine lathe, 16" swing over cross slide, 3-jaw chuck, micro stop, #72620
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 2516X120
SERIAL. 49549, MODEL. 2516X120, SERIES. 612, SWING OVER WAYS. 25", SWING OVER CROSS SLIDE. 16", DISTANCE BETWEEN CENTERS. 120", SPINDLE SPEEDS. (36) 12 TO 1500 RPM, FEEDS. (66).0011" TO.0683" IPR, THREADS. (66) 2 TO 120 TPI, DIAMETER OF SPINDLE HOLE. 2-1/16", THREAD DIAL. YES, CHUCK. 3 JAW, MICRO-STOP. YES, CHIP PANS ...more
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
25" x 120" Ikegai, Lathe w/Taper, 3 and 4 jaw chucks, tailstock chuck, live center, steady rests
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Ikegai 25×120″ lathe with taper attachment, 3 and 4 jaw chucks, tailstock chuck and live center and steady rests..
26" x 120" Acra, engine lathe, 17-1/2" swing over cross slide, inch/metric, 3 & 4-jaw chuck, Newall 2-Axis digital read out, 2005
Cleveland Machinery Sales Inc | Cleveland, OH
Category: Engine Lathes
Seller: Cleveland Machinery Sales Inc
Location: Cleveland, OH
Mfr: Acra
Year: 2005
Capacity: 26/35 x 120, Swing Over Bed: 26, Swing Over Cross Slide: 17-1/2, Swing In Gap: 35-1/8, Distance Between Centers: 120, Bed Width: 16 1/2, Headstock:, Spindle Nose: D1-11, Spindle Bore: 4, Spindle 12 Speeds Range: 17 ~ 1,200 RPM, Carriage:, Threads & Feeds:, Inch Threads: 2 ~ 56 TPI, Metric Threads: 0.5 ~ ...more
26" x 120" Cazeneuve #HB725, engine lathe, 16" swing over cross slide, inch/metric, 3-jaw 15.5" chuck, 20 HP, 1985
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Cazeneuve
Model: HB725
Year: 1985
Size 26"x120"cc Make CAZENEUVE Year 1985, ONE USED - 26” x 120” cc CAZENEUVE Engine Lathe, Model: HB725, Serial Number: UNK, New 1985, 26” Swing Over Bedways, 16” Swing Over Cross Slide, 36” Swing In Gap, Hardways, Inch/Metric Threading, 3.250” Spindle thru Hole, Spindle Speeds from ...more
26" x 120" Cincinnati, Engine Lathe, 20" 4-jaw chuck, 16 - 640 RPM, steady rest
Smith Machinery Co | Ames, IA
Category: Engine Lathes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Cincinnati
SWING ---------------------------------- 26 in, BETWEEN CENTERS ------------------------ 120 in, SPINDLE SPEEDS ------------------------- 16 - 640 RPM, SPINDLE BORE --------------------------- 2 1/4 in, FACE PLATE ----------------------------- 24 in, MOTOR ---------------------------------- 230/460V, 3PH, QUICK CHANGE ...more
26" x 120" DMTG #CDS26120C, engine lathe, 16" swing over cross slide, 3 & 4-jaw chuck, inch/metric, 2007
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Dmtg
Model: CDS26120C
Year: 2007
26" x 120" GMC #GML-26120, Metal Lathe, 1600 RPM, 26" Swing, 4-1/2" Chuck
Wheeler Machinery Sales | Pomona, CA
Category: Engine Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: GML-26120
New GMC 26" x 120" Metal Lathe with 2-Axis DRO GML-26120, ISO 9001 certified, Large spindle bore 4-1/8, Heavy Duty spindle D1-8, Heavy Duty guideway width 16, Heavy Duty main motor 10HP, 16 spindle speeds from 25-1,600 rpm, 16 speeds, 54 kinds of inch threads, and 54 kinds of metric threads, Threading and feeding rate ...more
26" x 120" Jet #GH-26120ZH, Engine Lathe, Acu-Rite 203 digital read out, 12" 3-Jaw chuck, (2) Steady Rests, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Jet
Model: GH-26120ZH
26" X 120" Engine Lathe with Acu-Rite 203 DRO, 12" 3-Jaw Chuck, (2) Steady Rests w/ Roller Bearings, Induction Hardened & Ground Bed Ways, Electric Chuck Key Holder, Fitted Top Mats to Hold Tooling, Full Length Splash Guard, Heavy Duty Tailstock & Quill, Rapid Power Traverse to Cross Slide and ...more
27" x 120" Hercules Ajax #HR3000, heavy duty engine lathe, 18" chk, 3-jaw, 4" spindle hole, 16" Steady Rest, rapid traverse, coolant, 1981
Yoder Brothers Machinery | Holland, OH
Category: Engine Lathes
Seller: Yoder Brothers Machinery
Location: Holland, OH
Mfr: Hercules
Model: HR3000
Year: 1981
SERIAL. 03691230 MODEL. HR3000 YEAR NEW. 1981 SWING OVER WAYS. 27" DISTANCE BETWEEN CENTERS. 120" SPINDLE SPEEDS. (16) 8 TO 800 RPM FEEDS. YES, SEE MACHINE CHART THREADS. YES, SEE MACHINE CHART METRIC THREADING. YES, SEE MACHINE CHART DIAMETER OF SPINDLE HOLE. 4" CHUCK. 18" 3-JAW, STEADY REST. 16", TAPER ATTACHMENT. ...more
27" x 120" Timemaster #Super-M, engine lathe, 18 swing over cross slide, inch/metric, 4-jaw 23" chuck, 1980
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Timemaster
Model: SUPER-M
Year: 1980
Size 27"x120"cc Make TIMEMASTER Year 1980, ONE USED - 27” x 120”cc TIMEMASTER Engine Lathe, Model: SUPER M, Serial Number: 6523, New 1980, 27” Swing Over Bedways, 18” Swing Over Cross Slide, Hardways, Taper Turning Attachment, Inch/Metric Threading, 2.75” Spindle thru Hole, Spindle Speeds ...more
