18 Results
14" x 30" Leblond #REGAL-SERVO-SHIFT, engine lathe
SOMINN Machinery Sales | Dodge Center, MN
Category: Engine Lathes
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Leblond
Model: REGAL-SERVO-SHIFT
LEBLOND (USED) MODEL REGAL SERVO SHIFT LATHE, 14" SWING, 30" CC, 45-1800 RPM, 1-17/32 SPINDLE BORE, L-O SPINDLE, 4-224 TPI, - 8" 3 JAW CHUCK ( NO KEY), - LIVE CENTER, - QUICK CHANGE TOOLPOST (NO HOLDERS), - INTERGRATED CHUCK GUARD.
JUST ADDED!
14" x 40" South Bend #SB1013, Engine Lathe, 8.375" socs, 8" 3-jaw chuck, 10" 4-jaw chuck, 12" face plate, 5 HP, 2500 RPM, 440 Volt, 3PH, 2012
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: South Bend
Model: SB1013
Year: 2012
Here We Have:, DEMO South Bend 14″ x 40″ EVS Lathe with 2 Axis DRO Model SB1013, Complete With:, 8” 3 Jaw, 10” 4 Jaw, 12” Face Plate, Steady Rest, Follow Rest, Spindle Taper, Tool Post W/ 2 Holders, Spindle Stop, Make: South Bend, Model: SB1013, Serial Number: 0030, NEW IN: 2012, Swing ...more
JUST ADDED!
14" x 40" South Bend #SB1013, EVS Engine Lathe, 8.375" swing over cross slide, 20.98" swing over gap, 5 HP, 20-2500 RPM, Allen Bradley 2-axis digital read out, 440 Volt, 3PH, 2012
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: South Bend
Model: SB1013
Year: 2012
Here We Have:, DEMO South Bend 14″ x 40″ EVS Lathe with 2 Axis DRO Model SB1013, Complete With:, 8” 3 Jaw, 10” 4 Jaw, 12” Face Plate, Steady Rest, Follow Rest, Spindle Taper, Tool Post W/ 2 Holders, Spindle Stop, Make: South Bend, Model: SB1013, Serial Number: 0030, NEW IN: 2012, Swing ...more
14" x 40" South Bend #SB1013, Electronic Variable Speed Engine Lathe, 8.3" swing over cross slide, (1) 8" 3-jaw chuck, (1) 10" 4-jaw chuck, 12" face plate, Allen Bradley 2-axis digital read out, 440 Volt, 2012
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: South Bend
Model: SB1013
Year: 2012
Here We Have:, DEMO South Bend 14″ x 40″ EVS Lathe with 2 Axis DRO Model SB1013, Complete With:, 8” 3 Jaw, 10” 4 Jaw, 12” Face Plate, Steady Rest, Follow Rest, Spindle Taper, Tool Post W/ 2 Holders, Spindle Stop, Make: South Bend, Model: SB1013, Serial Number: 0030, NEW IN: 2012, Swing ...more
JUST ADDED!
16" x 80" Webb #16X40, Engine Lathe, 12" chuck, 28-1350 RPM, AccuRite III digital read out, tool post, Steady Rest
Source Machinery Sales | Fridley, MN
Category: Engine Lathes
Seller: Source Machinery Sales
Location: Fridley, MN
Mfr: Webb
Model: 16X40
Webb Engine Lathe, Model WL-520, 20.5" Swing Over Bed, 80" Distance between centers, 12" Chuck, Accu-rite III Digital Read Out, 28-1350 Spindle Speed, Tool Post, Steady Rest.
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
16" x 102" American Pacemaker #16X102, engine lathe, 25-1500 RPM, 15" 4-Jaw chuck, Steady Rest
Inter-Plant Sales | Hugo, MN
Category: Engine Lathes
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: American
Model: 16X102
19" x 78" Leblond Makino #Regal, Engine Lathe, 12-1/4" swing over cross slide, 3-1/16" spindle bore, 12" 3-jaw chuck, 17" face plate, 10 HP, 1600 RPM, 2-axis Acu-Rite digital read out, 440 Volt, 1992
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Leblond
Model: REGAL
Year: 1992
HERE WE HAVE:, NICE WELL TOOLED 19″ x 78″ LEBLOND MAKINO SERVO-SHIFT ENGINE LATHE, W/ 3-1/16” SPINDLE BORE, 2 AXIS ACU-RITE DIGITAL READOUT, MAKE: LEBLOND MAKINO, MODEL: 19″ REGAL, 19X78, SERIAL NUMBER: 15E-484, NEW IN: 1992, HOLE THRU SPINDLE: 3-1/16″, SWING OVER BED: 19-1/4″ ...more
JUST ADDED!
20" x 80" Summit #20X80B, Engine Lathe, 16" bed width, 15" gap length, 13-1/4" swing over cross slide, 4-1/8" spindle bore, 30" swing in gap, 10 HP, 1400 RPM, 2015
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2015
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41038, New in: 2015, Swing over bed: 20 ¼”, Distance ...more
20" x 80" Summit #20X80B, Heavy-Duty Engine Lathe, 4-1/8" spindle bore, 10 HP main motor, 1400 RPM, 2-axis Newall digital read out, 220 Volts, 3PH, 2015
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2015
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41038, New in: 2015, Swing over bed: 20 ¼”, Distance ...more
20" x 80" Summit #20x80B, Heavy-Duty Engine Lathe, 13-1/4" swing over cross slide, 5" compound travel, 4-1/8" spindle bore, 10 HP, 1400 RPM, 2-axis Newall digital read out, 220 Volt, 2016
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2016
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41569, New in: 2016, Swing over bed: 20 ¼”, Distance ...more
JUST ADDED!
20.2" x 80" Summit #20X80B, Engine Lathe, 4-1/8" spindle bore, 13.25" socs, 16" bed width, 14-1400 RPM, 10 HP, 2-Axis Newall digital read out, 2016
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2016
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41569, New in: 2016, Swing over bed: 20 ¼”, Distance ...more
21" x 120" Clausing #Colchester, Engine Lathe, 3.5" bore, 3 jaw 12" chuck, 1400 RPM, 12.5 HP, Steady Rest
Inter-Plant Sales | Hugo, MN
Category: Engine Lathes
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Clausing
Model: COLCHESTER
25" x 96" LeBlond #Super-Regal, Lathe, 15" & 12" chuck, 1.75" thru hole, 24" face plate, 15-350 RPM, 5 HP, 220 V
Inter-Plant Sales | Hugo, MN
Category: Engine Lathes
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Leblond
Model: SUPER-REGAL
34-1/2" x 108" Monarch, 8-405 RPM, 3 & 4 Jaw chucks, taper attachment, steady rest, tailstock
Inter-Plant Sales | Hugo, MN
Category: Engine Lathes
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Monarch
37" x 314" Shepard-Niles #DLZ800III, 3 & 4-jaw chuck, 3.78" hole, 710 RPM, inch/metric, rapid, 40 HP, 1972
Strand Industrial Machinery | Hamel, MN
Category: Engine Lathes
Seller: Strand Industrial Machinery
Location: Hamel, MN
Mfr: Shepard-Niles
Model: DLZ800III
Year: 1972
, SWING OVER BED.37-1/2", SWING OVER CARRIAGE.24", DISTANCE BETWEEN CENTERS.314", INCH & METRIC THREADING, SPEEDS ---(18).14 TO 710 RPM, FEED RATES ------(42).0018 TO.125 IPR, HOLE THRU SPINDLE.3-7/8", MACHINE DIMENSIONS.39' L X 72" W X 69" H, MAIN DRIVE MOTOR.40 HP 220/440/3/60, 25" -3-JAW CHUCK WITH 9-15/16 ...more
JUST ADDED!
42" x 120" Summit #42X120, Engine Lathe, 27.5" swing over cross slide, 20" 4-jaw chuck, 5-5/8" spindle bore, 30 HP, Newall 2-axis digital read out, 220 Volt, 3PH, 2004
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 42X120
Year: 2004
Here We Have:, 42-5.625×120 Heavy Duty Engine Lathe 5.625” Through Hole, 2 Axis DRO, Taper Attachment, “European Manufactured”, Make: Summit, Model: 42×120, Serial: 34050, New in: 2004, Swing over bed: 42.9”, Swing over cross slide: 27.5”, Work Piece Weights, At the headstock ...more
42" x 120" Summit #42x120, Engine Lathe, 27.5" swing over cross slide, 20" 4-jaw chuck, 30 HP, Newall 2-axis digital read out, 220 Volt, 3PH, 2004
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 42X120
Year: 2004
Here We Have:, 42-5.625×120 Heavy Duty Engine Lathe 5.625” Through Hole, 2 Axis DRO, Taper Attachment, “European Manufactured”, Make: Summit, Model: 42×120, Serial: 34050, New in: 2004, Swing over bed: 42.9”, Swing over cross slide: 27.5”, Work Piece Weights, At the headstock ...more
21" x 120" Powerturn, lathe, 2000 RPM, 10" 3-jaw, fanuc Control, 3-3/16" spindle, 20 HP
SOMINN Machinery Sales | Dodge Center, MN
Category: Engine Lathes
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Powerturn
POWERTURN (USED) MODEL 21 X 120 LATHE, 21" SWING OVER BED, 14" SWING OVER CROSS SLIDE, 120" CENTER CAPACITY, 116" MAXIMUM TURNING LENGTH, 3-3/16" SPINDLE HOLE, 2000 RPM SPINDLE SPEEDS, NUMBER OF SPEEDS, - INFINITELY VARIABLE, - MONO RANGE TO 4-GEARED, 20 HP SPINDLE MOTOR, - 10" 3-JAW ...more
