13 Results
25" x 118" Webb Whacheon #HL-630, 3" bore, 28-1350 RPM,tool post, face plate, 2 Steady Rest, worklight, 6-Jaw chuck, chip tray, Trav-A-Dial on carriage, coolant, #A6828
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Webb
Model: HL-630
Swing Over Bed 24.80" Swing Over Cross Slide 14.96" Swing Over Gap Non-Gap Distance Between Centers 118.11" Spindle Bore 3-1/8" Taper of Spindle Bore M.T. #7 Taper of Center: M.T. M.T. #5 Number Of Spindle Speeds 12 Range Of Spindle Speeds 27 – 1,205 RPM Number of Feed Changes 40 Steps Longitudinal Feed (Z-Axis) ...more
25" x 120" Daewoo Doosan Ikegai #DA25, hi-speed precison engine lathe, 8" chuck, inch/metric
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Daewoo Doosan
Model: DA25
Year: 1981
Spec Sheet:, 25" x 120" DAEWOO-IKEGAI HIGH SPEED PRECISION, ENGINE LATHE W/TAPER ATTACHMENT, Serial No. 040059, Model DA25, Taper Attachment, 2.2" Hole Thru Spindle, Inch-Metric Threading Capabilities, Threading Dial - Power Rapid Traverse (4-Way), 4-Jaw Chuck w/Jaws - Hardened & Ground Bed Ways, CATALOG :, Hole ...more
25" x 120" Daewoo-Ikegai hi-speed precision #DA25, taper attach, 2.2"hole thru spindle,inch/metric, 4-jaw chuck
Mohawk Machinery Inc | Cincinnati, OH
Category: Engine Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Daewoo Ikegai
Model: DA25
Year: 1981
25" x 120" DAEWOO-IKEGAI HIGH SPEED PRECISION, ENGINE LATHE W/TAPER ATTACHMENT, Serial No. 040059, Model DA25, 25" x 120" DAEWOO-IKEGAI HIGH SPEED PRECISION, ENGINE LATHE W/TAPER ATTACHMENT, Serial No. 040059, Model DA25, Taper Attachment, 2.2" Hole Thru Spindle, Inch-Metric Threading Capabilities - Steady Rest ...more
JUST ADDED!
25" x 120" Daewoo Ikegai #DA25, Engine Lathe, 2.2" bore, 2000 RPM, 15 HP, inch/metric thread, 1981
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Ikegai
Model: DA25
Year: 1981
THIS HIGH-SPEED PRECISION ENGINE LATHE S A 25-INCH RATED SWING OVER THE BED WAYS (24.4 INCHES ACTUAL) AND A 15.5-INCH SWING OVER THE CARRIAGE, WITH A DISTANCE OF 120 INCHES BETWEEN CENTERS. THE SPINDLE HAS A 2.2-INCH HOLE AND OFFERS 20 SPEEDS RANGING FROM 25 TO 2000 RPM, POWERED BY A 15 HP MOTOR. ITS THREADING ...more
25" x 120" Monarch #2516x120, engine lathe, 16" swing over cross slide, 3-jaw chuck, micro stop, #72620
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 2516X120
SERIAL. 49549, MODEL. 2516X120, SERIES. 612, SWING OVER WAYS. 25", SWING OVER CROSS SLIDE. 16", DISTANCE BETWEEN CENTERS. 120", SPINDLE SPEEDS. (36) 12 TO 1500 RPM, FEEDS. (66).0011" TO.0683" IPR, THREADS. (66) 2 TO 120 TPI, DIAMETER OF SPINDLE HOLE. 2-1/16", THREAD DIAL. YES, CHUCK. 3 JAW, MICRO-STOP. YES, CHIP PANS ...more
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
25" x 120" South Bend #Nordic-25, gap bed engine lathe, 15-3/4" swing over cross slide, 4-jaw 16" chuck, inch/metric, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: South Bend
Model: NORDIC-25
SERIAL. N315H83GT0276MODEL. NORDIC 25SWING OVER WAYS. 25"SWING IN GAP. 35"SWING OVER CROSS SLIDE. 15-3/4"DISTANCE BETWEEN CENTERS. 120"SPINDLE SPEEDS. 18 TO 1400 RPMCHUCK. 16" 4-JAWFEEDS LONGITUDINAL. 0.0028 TO 0.0045 IPRCROSS FEEDS. 0.0014 TO 0.02225 IPRTHREADS (ENGLISH). 1/2 TO 64 TPITHREADS (METRIC). 0.065 TO 118 ...more
25" x 120" Ikegai, Lathe w/Taper, 3 and 4 jaw chucks, tailstock chuck, live center, steady rests
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product Ikegai 25×120″ lathe with taper attachment, 3 and 4 jaw chucks, tailstock chuck and live center and steady rests..
25" x 126" American #20D-Pacemaker, engine lathe, 16" swing over cross slide, 4-jaw 18" chuck, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: American
Model: 20D-PACEMAKER
SERIAL. 78371-69, MODEL. #20D "PACEMAKER", SWING OVER BED (ACTUAL). 25", SWING OVER CROSS SLIDE. 16", DISTANCE BETWEEN CENTERS. 126", SPINDLE SPEEDS. (27) 15 TO 1000 RPM, FEEDS. (66).0015 TO.0913 IPR, THREADS. (66) 2 TO 120 TPI, LEADS. (66).0083 TO.5000 LPI, HOLE THRU SPINDLE. 2", HARDENED REPLACEABLE WAYS. YES, TAPER ...more
26" x 118" Knuth #SINUS330/3000D, gap bed engine lathe, 17" swing over cross slide, 3-jaw 15" chuck, 2-Axis digital read out, 10 HP, 2016
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Knuth
Model: SINUS330/3000D
Year: 2016
SERIAL. 4064MODEL. SINUS330/3000DYEAR NEW. 2016SWING OVER WAYS. 26"SWING OVER CROSS SLIDE. 17"SWING IN GAP. 35"DISTANCE BETWEEN CENTERS. 118"SPINDLE SPEEDS. 25 TO 1600 RPMDIAMETER OF SPINDLE HOLE. 4.1"THREADS STANDARD. 1-5/8" TO 72 TPITHREADS METRIC.045 TO 120 MMTHREADS DIAMETRIC. 0.88DP TO 160 DTHREAD MODULE. 0.25 TO ...more
26" x 120" GMC #GML-26120T, lathe, 15 Hp, 4.75" bore, automatic lube, digital read out, 17.25" swing over cross slide, 35" swing gap, 16 speed 25-1600 RPM spindle, D1-11, 12" 3-jaw chuck, 20" face, steady & follow rest
Wheeler Machinery Sales | Pomona, CA
Category: Engine Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: GML-26120T
GML-26120T #7723, Max. swing over bed 26, Max. length of workpiece 120, Max. swing over cross slide 17-1/4, Max. Swing in gap 35, Width of Bed 15-3/4", Effective length in gap to spindle 9, Effective length in gap to chuck jaws 4-1/2, Spindle bore 4-3/4 (120mm), D1-11, Taper of spindle center MT# 7/MT5 with reducing ...more
26" x 120" Kingston #HD26120, engine lathe, 17" swing over cross slide, inch/metric, 3 & 4-jaw chuck, digital read out, 10 HP, 1997
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Kingston
Model: HD26120
Year: 1997
JUST ADDED!
27" x 120" Geminis #GE-650, Manual Engine Lathe, 15" swing over cross slide, 15 HP, 4" bore, 1200 RPM, inch/metric thread, tailstock, Steady Rest
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Markham, ON
Mfr: Geminis
Model: GE-650
THE GEMINIS GE-650 10'FT MANUAL ENGINE LATHE OPERATES ON 575V, 60HZ, 3PH POWER AND IS DRIVEN BY AN 11 KW (15 HP) MAIN MOTOR. IT OFFERS A CAPACITY OF 27IN (650 MM) SWING OVER BED, 15.7 IN (400 MM) SWING OVER CROSS SLIDE, AND APPROXIMATELY 120 IN DISTANCE BETWEEN CENTERS. THE SPINDLE S A ~4.1 IN (105 MM) BORE ...more
27" x 120" Timemaster #Super-M, engine lathe, 18 swing over cross slide, inch/metric, 4-jaw 23" chuck, 1980
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Timemaster
Model: SUPER-M
Year: 1980
Size 27"x120"cc Make TIMEMASTER Year 1980, ONE USED - 27” x 120”cc TIMEMASTER Engine Lathe, Model: SUPER M, Serial Number: 6523, New 1980, 27” Swing Over Bedways, 18” Swing Over Cross Slide, Hardways, Taper Turning Attachment, Inch/Metric Threading, 2.75” Spindle thru Hole, Spindle Speeds ...more
