16 Results
11" x 18" ACRA #ATL618E, precision lathe, 3 HP, 4000 RPM, 6" swing over cross slide, 1-1/4" bore, 28 holders, quick change, digital read out, inch/metric thread, 2006
Myers Technology Co LLC | Elk Grove Village, IL
Category: Precision and Second Operation Lathes
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Acra
Model: ATL618E
Year: 2006
Precision Tool room lathe with built in DRO and electronic threading in inch and metric, S:, Series: ATL618E, Swing Over Bed: 11", Swing Over Cross Slide: 6", Spindle Speed: 150 ~ 4,000 rpm, Spindle Nose: 5C (10 degree)/4-degree Taper, Hole Thru Spindle: 1-1/4, Main Motor: 3 HP, Voltage: 230V AC/1PH/3PH, Dimensions: ...more
11" x 18" Feeler #FTL-618E, 6-1/2" swing over cross slide, inch threading, 1.25" bore, 5" chuck, 5C collets, 2004
Liberty Machinery Co | Lincolnshire, IL
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Feeler
Model: FTL-618E
Year: 2004
Year Built - 2004, Serial No. 8E109, Swing Over Bed.11", Swing Over Cross Slide.6-1/2", Swing Over Carriage.9", Distance Between Centers.18", Hole Thru Spindle.1-1/4", Compound Slide Travel.3", Carriage Power Feed Range - Variable.5/16" - 7 IPM, Cross Slide Power Feed Range - Variable.3/16" - 4 IPM, Spindle Speed - ...more
11" x 18" Hardinge #HC, 9" max workpiece diameter, 1.25"spindle bore, 1 HP, S35847
Perfection Global | Elk Grove Village, IL
Category: Precision and Second Operation Lathes
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Hardinge
Model: HC
Max. Swing Over Bed: 11"Max. Swing Over Carriage: 9"Max. Swing Over Cross Slide: 5.75"Compound Slide Travel: 3"Distance Between Centers (Tailstock Flush): 18"Distance Between Centers (Tailstock Overhung): 20"Power Feed Range: 0.25 IPM - 7 PMLongitudinal Feed Rate: 0.31 IPM - 7 IPMCross Feed Rate: 0.18 IPM to 4 ...more
11" x 18" Hardinge #HLV-H, precision lathe, inch thread, taper, 5C collet, compound cross, 1993
Liberty Machinery Co | Lincolnshire, IL
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Hardinge
Model: HLV-H
Year: 1993
Serial No. HLV-H-11377T, Year Built – 1993, Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle. Hardinge tapered spindle nose. Tool storage compartment. Built-in coolant system. Hardened ...more
11" x 18" Hardinge #HLV-H, inch thread, 5C collet, compound cross, AcuRite digital read out system, 1990
Liberty Machinery Co | Lincolnshire, IL
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Hardinge
Model: HLV-H
Year: 1990
Serial No. HLVH-8676T, New - 1990, Motor driven with 2-Speed, 3/60/230 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle. Hardinge tapered spindle nose. Tool storage compartment. Built-in coolant system. Hardened and ground dovetail ...more
Get email updates for newly added Precision and Second Operation Lathes
Precision lathes are high-accuracy machines used for fine, detailed work requiring tight tolerances and smooth finishes, often in industries like aerospace and watchmaking. Second operation lathes, also known as capstan or turret lathes, are used in mass production to perform additional machining tasks on already partially machined parts, allowing for efficient and repetitive operations without extensive retooling.
11" x 18" Hardinge #HLV-H, precision tool room lathe, 3-jaw chuck, self contained coolant system, 1982
Blumberg Machinery Co | Bannockburn, IL
Category: Precision and Second Operation Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Hardinge
Model: HLV-H
Year: 1982
HARDINGE HLV-H Precision Tool Room Lathe, New 1982, Motor Driven with.5 1.HP, Two-Speed Main Drive Motor and Electrical Controls, Spindle construction- HARDINGE ball bearing, Spindle nose- Hardinge tapered, Spindle capacity with round type 5C collets- 1-1/16", Spindle capacity with step chucks- 1-1/16" – ...more
11" x 18" Hardinge #HLVH-EM, super precision toolroom lathe, inch/metric, 2-Axis digital read out, 1994
Belmont Machinery Co | Aurora, IL
Category: Precision and Second Operation Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Hardinge
Model: HLVH-EM
Year: 1994
JUST ADDED!
11" x 18" Hardinge #HLVH-EM, super precision toolroom lathe, 6" swing over cross slide, 2-Axis digital read out, 1.5 HP, 1998
Belmont Machinery Co | Aurora, IL
Category: Precision and Second Operation Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Hardinge
Model: HLVH-EM
Year: 1998
11" x 18" Kent USA #CTL-618E & CHR-68E Precision Toolroom Lathe, new, #12886, 12885 (2 available)
Blumberg Machinery Co | Bannockburn, IL
Category: Precision and Second Operation Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: CTL-618E
11" x 18" KENT USA CTL-618EVS PRECISION TOOLROOM LATHE - NEWPRODUCT HIGHLIGHTS50-4000 infinitely variable spindle speeds using electronic vector driveFlat panel LCD display shows spindle RPM and tool feed rate to let operator easily select best turning conditionsLCD displays electric current value to easily check for ...more
11" x 18" Victor #618EM, inch/metric, 3000 RPM, 5C, 5" chuck, Aloris Post, 2002
Liberty Machinery Co | Lincolnshire, IL
Category: Precision and Second Operation Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Victor
Model: 618EM
Year: 2002
New - 2002, Serial No. 9007497, Spindle Capacity 5C Collets - Round.1-1/16", Spindle Capacity 5C Collets - Hex.7/8", Step Chucks.1-1/16" to 6", Variable Spindle Speed.130 - 3,000 RPM, Swing Over Bed.11", Swing Over Cross Slide.6", Swing Over Carriage.9", Distance Between Centers.18", Hole thru Spindle.1-1/4", Compound ...more
18" x 63" Kent USA #CS-1860, manual precision lathe, 7.5 HP, 3-jaw 10" chuck, new
Blumberg Machinery Co | Bannockburn, IL
Category: Precision and Second Operation Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: CS-1860
18" x 63" KENT USA CS-1860 MANUAL PRECISION LATHE - NEW, PRODUCT HIGHLIGHTS, · 7.5 HP Spindle Motor, 12-Speeds, · Precision Spindle with 3 Point Support, · 3.2” Spindle Through Hole, · Hardened and ground spindle gears and shafts; hardened and ground bedways, · Solid Full ...more
20" x 60" Kent USA #ML-2060T, precision lathe, 3-jaw 10" chuck, 2-Axis AcuRite digital read out, 2008
Blumberg Machinery Co | Bannockburn, IL
Category: Precision and Second Operation Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: ML-2060T
Year: 2008
20" x 60" KENT USA MODEL ML-2060T PRECISION ENGINE LATHE, New 2008, 10" 3-Jaw Chuck, Steady Rest, Tool Post, Coolant, 2-Axis Acu-Rite DRO, Work Light, Thread Chasing Dial, Full Length Splash Guard, Swing Over Bed 20", Swing Over Cross Slide 14", Swing Over Gap 27.5", Length Of Gap 8", Distance Between Centers 57" ...more
26" x 80" Kent USA #HW-2680, manual precision lathe, 15 HP, 3-jaw chuck, new
Blumberg Machinery Co | Bannockburn, IL
Category: Precision and Second Operation Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: HW-2680
26" x 80" KENT USA HW-2680 MANUAL PRECISION LATHE - NEW, PRODUCT HIGHLIGHTS, 15 HP Spindle Motor, 12-Speeds 4.5” Spindle Through Hole Solid Full Length Casting Base Spindle Jog Button Control One-shot/Auto Lubrication for Apron, Carriage, and Bed Ways Multi-position Adjustable Feed Position Stops Dual ...more
26" x 90"/120"/160" Kent USA #CH-26, precison engine lathe, 15 HP, 3-jaw 16" chuck, new
Blumberg Machinery Co | Bannockburn, IL
Category: Precision and Second Operation Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: CH-26
NEW - 26" x 90"/120"/160" KENT USA MODEL CH-26 PRECISION ENGINE LATHE, Outstanding s:, · 15 HP Spindle Motor, 12-Speeds, ·, 4.1” (104mm)Spindle Through Hole, · Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity, · Spindle Jog Button Control, · One-shot ...more
30" x 90"/120"/160" Kent USA #CH-30, precison engine lathe, 15 HP, 3-jaw 16" chuck, new
Blumberg Machinery Co | Bannockburn, IL
Category: Precision and Second Operation Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: CH-30
NEW - 26" x 90"/120"/160" KENT USA MODEL CH-30 PRECISION ENGINE LATHE, Outstanding s:, · 15 HP Spindle Motor, 12-Speeds, ·, 4.1” (104mm)Spindle Through Hole, · Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity, · Spindle Jog Button Control, · One-shot ...more
JUST ADDED!
Hardinge #HCT-CF, precision tool room lathe, 5C spindle nose, 8 position turret, 1 HP
Perfection Industrial Sales | Elk Grove Village, IL
Category: Precision and Second Operation Lathes
Seller: Perfection Industrial Sales
Location: Mount Prospect, IL
Mfr: Hardinge
Model: HCT-CF
Hardinge HCT-CF, 5C Spindle Nose, 8-Position Turret, 1 HP.
