351 - 400 of 965 listings
18" x 60" Mueser, engine lathe, 12" swing over cross slide, 4-jaw 12" chuck, 5 HP, 3 point steady rest, #67231
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Mueser
SERIAL. 38368, SWING OVER WAYS. 18", SWING OVER CROSS SLIDE. 12", SWING IN GAP. 26", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. (12) 28 TO 1250 RPM, FEEDS (ENGLISH). (92).0012 TO.0128, THREADS (ENGLISH). (92) 1/2 TO 152 TPI, THREADS (METRIC). (46) 0.5 TO 92 TPMM, DIAMETER OF SPINDLE HOLE. 2", 4-JAW CHUCK. 12" ...more
18" x 60" Powerturn, precision lathe, 10.4" swing over cross slide, 3.14" spindle bore, 3 & 4-jaw chucks, new
Trader Machinery Inc | Concord, ON
Category: Engine Lathes
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Powerturn
18"10.4"27"11.85"60"D1-83.14"25 - 1700 RPM4.75"MT 47.5 HP5,500 LBS.
18" -26" x 60" -160" Sharp #1860, 1880, 2240, 2280, 22100, 22120, 22160, 24160, 2640, 26120, 26160, Precision Engine Lathe, new, #14582, 14584 (13 available)
Blumberg Machinery Co | Bannockburn, IL
Category: Engine Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Sharp
Model: 1860
NEW 18" x 60" SHARP MODEL 1860L PRECISION ENGINE LATHE, The spindle is mounted on 2 precision tapered roller bearings and one ball bearing. This triple bearing support system ensure accuracy and rigidity at all times. The headstock can be adjusted for heavy irregular work piece at high speed turning to ensure ...more
18" x 60" Standard Modern #17-60 Series 4000, engine lathe, 10-1/2" swing over cross slide, 12" chk, #76247
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Standard
Model: 17-60
SERIAL. 50951, MODEL. 17-60, SERIES. 4000, SWING OVER WAYS. 18", LENGTH BETWEEN CENTERS. 60", SWING OVER CROSS SLIDE. 10-1/2", SPINDLE SPEEDS. 40 TO 1600 RPM, THREADS. 2 TO 112 TPI, FEEDS.0017 TO 100 IPR, THREAD DIAL. YES, CHUCK. 12" 3 JAW, DIAMETER OF SPINDLE HOLE. 3", SWIVEL COUMPOND. YES, COOLANT WITH CHIP PANS. ...more
18" x 60" Cosmo #L-1860, engine lathe, 10" swing over cross slide, 7.5 HP, 3.2" bore, 12 speed 40-2000 RPM, D1-8, inch/metric thread
Wheeler Machinery Sales | Pomona, CA
Category: Engine Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: L-1860
COSMO L-1860 Engine Lathe #7830, Swing Over Bed: 18", Swing Over Cross Slide: 10", Distance Between Centers: 60", Type: Geared Head Manual Precision Lathe, Motor: 7.5 HP, Spindle Speeds: 12 Speeds, 40 to 2000 RPM, Spindle Nose: D1-8 Camlock, Spindle Bore: 3.18" bore, Threading: Direct selection for inch/metric threads.
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
18" x 62" Profitmaster, engine lathe, 9" swing over cross slide, 3-jaw 10" chuck, rapid traverse, 20-200 RPM, #77121
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Profitmaster
SERIAL. 40015006300, SWING OVER WAYS. 18", SWING OVER CROSS SLIDE. 9", SPINDLE HOLE. 2-3/4", DISTANCE BETWEEN CENTERS. 62", SPINDLE SPEEDS. 20 to 200 rpm, TAPER ATTACHMENT. YES, RAPID TRAVERSE. YES, CHUCKS. 10" 3 JAW.
JUST ADDED!
18" x 64" VDF McDougal engine lathe, 2.5" bore, digital read out, 3-jaw chuck, 4-way tool post
MachineCo | Montreal, QC
Category: Engine Lathes
Seller: MachineCo
Location: Montreal, QC
Mfr: Vdf
18" x 68" Jet #GH-1868, gap bed engine lathe, 11" swing over cross slide, inch/metric, 3-jaw 12" chuck, foot brake
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Jet
Model: GH-1868
SERIAL., MODEL. GH-1868 GH, SWING OVER WAYS. 18", SWING IN GAP. 27-1/2", LENGTH OF GAP. 12-1/4", SWING OVER CROSS SLIDE. 11", DISTANCE BETWEEN CENTERS. 68", SPINDLE SPEEDS. (12) 25 TO 1800, DIAMETER OF SPINDLE HOLE. 3-1/8", ENGLISH THREADS. (61) 1-5/8 TO 72 TPI, METRIC THREADS. (24) 0.5 TO 20 TPMM, FEEDS LONGITUDINAL. ...more
18" x 72" Cincinnati #18-Tray-Top, engine lathe, 4-jaw 15" chuck, 7" 3 point steady rest, 5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 18-TRAY-TOP
SERIAL. HT326C 133, MODEL. 18 TRAY TOP, SWING OVER WAYS. 19", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 72", SPINDLE SPEEDS. 25 TO 980 RPM, THREADS. 1-1/2 TO 92 TPI, FEEDS.0019 TO.1215 IPR, SPINDLE HOLE. 1-3/4", CHUCK 4 JAW. 15" 4 JAW, STEADY REST 3 POINT. 7", THREAD DIAL. YES, CHIP PAN. YES, MAIN MOTOR. ...more
18" x 78" Axelson #16", engine lathe, 11" swing over cross slide, 3-jaw 12" chuck, steady rest, 15 HP, 1952
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Axelson
Model: 16
Year: 1952
Size 18"x78"cc Make AXELSON Year 1952, ONE USED - 18” x 78”cc AXELSON Engine Lathe, Model: 16”, Serial Number: 4931, 18” Swing Over Bedways, 11” Swing Over Cross Slide, Hardways, Taper Turning Attachment, Inch Threading, Spindle Speeds from 13 to 1577 RPM, 1.75” Hole Thru Spindle ...more
18" x 78" Sidney #16, 10" swing over cross slide, 11-1/2" spindle hole, 16" 4-jaw chuck, #4MT, 1000 RPM, 10 HP, 1954, #L3000192
N & R Machine Sales | Navasota, TX
Category: Engine Lathes
Seller: N & R Machine Sales
Location: Navasota, TX
Mfr: Sidney
Model: 16
Year: 1954
Swing Over Bed Ways 18-1/2", Swing Over Cross Slide 10", Center Distance 78", Spindle Hole 11-1/2", Spindle Speeds 13 To 1,000 Rpm's, Spindle Nose D1-6, Chuck Size 16" 4 Jaw, Feeds.0075 To 240, Threads Inch 1-1/2 To 90 TPI, Tail Stock Quill Diameter 4-1/2", Tail Stock Quill Travel 10", Tail Stock Taper #4 Morse ...more
18"/28" x 80" Acra #1880C, precision engine, 10" 3-Jaw, 12" 4-Jaw, Steady Rest, 20-1600 RPM, 12.5 HP, new, #SM1880C
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 1880C
Capacity 18" / 28" x 80" Swing Over Bed 18" Swing Over Cross Slide 11" Swing in Gap 28" Distance Between Centers 80" Bed Width 13 9/16" Spindle Nose D1-8 Spindle Bore 3 1/8" Taper of Spindle MT NO.7 Spindle Speeds - Steps 16 Spindle Speeds - Range 20 - 1600 RPM Cross SlideTravel 11" Compound Slide Travel 5 3/8" Inch ...more
18" x 80" Acra-Turn #1880, lathe, 11" swing over cross slide, inch/metric, 12 HP, coolant, forward & reverse, foot brake, 2000
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Acra-Turn
Model: 1880
Year: 2000
SERIAL. 080275, MODEL. 1880, YEAR. 2000, SWING OVER WAYS. 18", SWING OVER CROSS SLIDE. 11", SWING IN GAP. 24", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. 37 TO 1500 RPM, DIAMETER OF SPINDLE HOLE. 3.125", FEEDS LONGITUDINAL.001 TO.256 IPR, THREADS (ENGLISH). 1 TO 56 TPI, THREADS METRIC. 0.4 TO 7 MM, CHUCK. 12" 3 ...more
JUST ADDED!
18" x 80" Longem #LG-2080DS, Lathe, 3 jaw 12" chuck, 3" bore, tailstock, Enco Control
HGR24 | Euclid, OH
Category: Engine Lathes
Seller: HGR24
Location: Euclid, OH
Mfr: Longem
Model: LG-2080DS
Inventory No. 0426-082-0001 Manufacturer Longem Model No. LG-2080DS Name Lathe Arrival Date 04-23-2026 Dimensions L x W x H (inches) 138 x 55 x 67 Capacity 18” X 80” Electrical 3/60/220/440 Weight (lb.) 5990 Category Machine Tools Condition Used Available Quantity 1 Serial No. 96-1-140 Item 43 A, 12” ...more
18" x 84" Lodge & Shipley #1884, engine lathe, 9-500 RPM, 2-3/8" hole, 4-jaw chuck, taper attachment, chip pans w/ coolant, Steady Rest
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lodge & Shipley
Model: 1884
MODEL. 1884, SWING OVER WAYS. 18", SWING OVER CROSSLIDE. 10", DISTANCE BETWEEN CENTERS. 84", SPINDLE SPEEDS. (24) 9-500 RPM, DIAMETER OF SPINDLE HOLE. 2 3/8", TAPER ATTACHMENT. YES, CHIP PANS WITH COOLANT. YES, STEADY REST. YES, 4 JAW CHUCK. YES, VOTLAGE. 440 VOLT.
18" x 96" Southbend #Turn-nado, engine lathe, 14" 4-jaw chuck, 3" hole, #4MT, Steady Rest
G-2000 | Toledo, OH
Category: Engine Lathes
Seller: G-2000
Location: Toledo, OH
Mfr: Southbend
Model: TURN-NADO
SERIAL.:, SWING OVER BED.: 18", SWING OVER SLIDE.: 10", DISTANCE BETWEEN CENTERS.: 96", HOLE THRU SPINDLE.: 3", SPINDLE SPEEDS.: 13-525 RPM, TAILSTOCK SPINDLE TRAVEL.: 5", TAPER IN TAILSTOCK.: # 4 MT, HP.: 10, - 14" 4 JAW, - 14" 3 JAW, - STEADY REST, Machine Type.Lathes, Engine Manufacturer.N/A Model.17" TURN-NADO ...more
18" x 100" Standard Modern #S/M, CNC engine lathe, 2" spindle bore, #3MT, Fagor Control, 10 HP
FMI Trading LLC | Vinton, TX
Category: Engine Lathes
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Standard
Model: S/M
Product Information, CNC Lathes Swing over bed:18" Between centers:100" Spindle bore:2" Tailstock spindle taper:MT3 Controller:Fagor HP:10 Voltage / Phase:380 / 3 Dimensions:54" x 149" x 69", Product Code: 03040144185 Make: Standard-Modern Model: S/M Serial Number: 12326 Condition: Used.
18" x 120" Willis #18120, Engine Lathe, 11-1/2" swing over cross slide, 13" bed width, 16" Bison 3-jaw chuck, 10 HP, 1700 RPM, 230 V., 3PH
Toolquip Inc | Lebanon, OH
Category: Engine Lathes
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Willis
Model: 18120
Engine Lathe for sale, featuring an 18" swing over bed, 120" centers, and a versatile D1-8 spindle nose. Comes with a 16" BISON 3 Jaw Chuck and 10 H.P. motor. Wired for 230V, 3-phase, 60 HZ., Swing over bed- 18, Swing in gap- 28, Swing over cross slide- 11-1/2, Distance between centers- 120cc, Spindle nose- D1-8 ...more
18.1" x 80" Clausing #Colchester-17, engine lathe, 10.6" swing over cross slide, 3" spindle bore, 10 HP
iGAM | Detroit, MI
Category: Engine Lathes
Seller: iGAM
Location: Detroit, MI
Mfr: Clausing
Model: COLCHESTER-17
This listing is for a Clausing Colchester 17 engine lathe., Unit powers on at 480V. Motor turns on, but the spindle does not engage. Most likely the micro switches are bad or out of adjustment. Threading lever and pick up dial assembly are missing., See photos for., Part No: 17, Type: Engine Lathe, Condition: PARTS ...more
18.5" x 78" Monarch #Toolmakers-60, 2-Axis digital read out, 6-jaw 16" chuck, 3-jaw 12" chuck, (3 available) Steady Rest
Mohawk Machinery Inc | Cincinnati, OH
Category: Engine Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Monarch
Model: TOOLMAKERS-60
18.5" x 78" MONARCH "TOOLMAKERS" ENGINE LATHE w/DRO, Serial No 36486, Series 60 Toolmakers, 18.5" x 78" MONARCH "TOOLMAKERS" ENGINE LATHE w/DRO, Serial No 36486, Series 60 Toolmakers, C80 Newall 2-Axis Digital Readouts, 16" 6-Jaw Chuck w/Jaws, 12" 3-Jaw Chuck, (3) Steady Rests, Hard Ways, (2) Removeable Coolant-Chip ...more
19" x 40" Cadillac #CL4885G-1940, engine lathe, 2.288" bore, 10 HP, 1800 RPM, 2005
PM Machines | Santa Ana, CA
Category: Engine Lathes
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Cadillac
Model: CL4885G-1940
Year: 2005
Swing 19", Centers 40", Spindle Bore 2.288", Power 10 hp, RPM 1,800 RPM, Swing Over Cross Slide 12", Dimensions R-L 100" X F-B 48" Wide X Height 60", Weight 4,800 Lbs., 3Phase 220 Volts.
19" x 40" Standard Modern #1940, 3.15" hole, D1-11, 6-jaw 12" Buck chuck, coolant pump, tool post, taper attachment, splash guard, #A5306
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Standard
Model: 1940
Capacity 19" x 40" Swing Over Bed 19" Distance Between Centers 40" Hole Thru Spindle 3.15" Spindle Nose D1-11 Spindle Speeds 23 - 1500 RPM Feeds 0.0016 - 0.100 IPR Inch Threads 2 - 120 TPI Horsepower 15 H.P. Voltage 220v/440v, Three Phase WEIGHT 5500 Lbs. s Tool Post Taper Attachment Splash Guard Coolant Pump 12" Buck ...more
19" x 49.5" LeBlond #Regal, Engine Lathe, 106" L x 14.5" width Bed, 12.5" diameter Chuck, 11" swing over cross slide, 400 V
Machinery Exchange International | Posen, IL
Category: Engine Lathes
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Leblond
Model: REGAL
106″ length of bed, 49.5″ dist between centers, 19″ swing over bed, 11″ swing over cross slide, 12.5″ dia chuck, 14.5″ bed width, 400v 3ph.
19" x 50" LeBlond #Regal, lathe, 12-1/4" swing over cross slide, 1-49/64" spindle bore, 7-1/2 HP, #16419
Vander Ziel Machinery Sales | Alto, MI
Category: Engine Lathes
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Leblond
Model: REGAL
LeBlond 19” x 50” Regal Lathe, 1 49/64” Spindle Bore, Serial # 7E-1660, Asset # 16419, Swing over Bed & Carriage Ways 19 1/4”, Swing over Cross Slide 12 1/4”, Distance Between Centers 50”, Spindle Speeds (12) 40-1600 RPM, Spindle Bore 1 49/64”, Spindle Mores Taper No. 4 ...more
19" x 54" LeBlond Makino #19-Regal, 12" 3-jaw,inch/metric threading, 40-1600 RPM, #4MT
Mohawk Machinery Inc | Cincinnati, OH
Category: Engine Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Leblond
Model: 19-REGAL
19" x 54" LEBLOND-MAKINO "19 REGAL" ENGINE LATHE, Serial No. 9E-538, Model 19" REGAL, 19" x 54" LEBLOND-MAKINO "19 REGAL" ENGINE LATHE, Serial No. 9E-538, Model 19" REGAL, 12" 3-Jaw Chuck w/Jaws, Servo Shift Hydraulic Shifting, Inch-Metric Threading, Hard Ways - Threading Dial, Turret Depth Stop, Coolant System ...more
19" x 54" Leblond #19-Regal-Servo-Shift, Engine Lathe, 13" swing over cross slide, 7.5 HP, 1600 RPM, tailstock, w/ Taper Attachment
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL-SERVO-SHIFT
THE LEBLOND 19" X 54" REGAL SERVO SHIFT LATHE IS AN ENGINE LATHE FEATURING A SWING OVER BED OF APPROXIMATELY 19" TO 20" AND A DISTANCE BETWEEN CENTERS OF 54". THE SWING OVER THE CROSS SLIDE IS APPROXIMATELY 13". IT IS POWERED BY A 7.5 HP MOTOR AND INCLUDES A SPINDLE WITH A BORE RANGING ...more
19" x 54" LeBlond #Makino-Servo-Shift, engine lathe, 12-1/4" swing over cross slide, 3-jaw chuck, inch/metric, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO-SERVO-SHIFT
SERIAL. 14E-144, MODEL. MAKINO SERVO SHIFT, SWING OVER BED. 19", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 72", SPINDLE SPEEDS. 40 TO 1,600 RPM, SPINDLE HOLE. 3", CHUCK. 3 JAW, THREADS INCH. (48) 2 TO 112 TPI, THREADS METRIC. 0.25 TO 14 MM, FEEDS. (48) 0.0018" TO 0.104", CROSS SLIDE TRAVEL. 11-1/4" ...more
19" x 54" LeBlond #Regal, lathe, 12-1/2" swing over cross slide, 3-jaw 12" chk, stdy rest, 5 HP, #68148 (2 available)
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 8E2639, MODEL. REGAL, SWING OVER WAYS. 19", SWING OVER CROSS SLIDE. 12-1/2", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, DIAMETER OF SPINDLE HOLE. 1-1/2", FEEDS. (48).0018 TO.104 TPI, THREADS. (48) 2 TO 112 TPI, CHUCK. 12" 3 JAW, TRAVEL DIAL. YES, THREAD DIAL. YES, STEADY REST. 6" 3 ...more
19" x 54" LeBlond #Regal, engine lathe, 13" swing over cross slide, 1-3/4" spindle hole, taper attachment, 4-jaw 12" chuck, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 5HD12354, MODEL. REGAL, SWING OVER WAYS. 19", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTER. 54", SPINDLE SPEEDS. (16) 38 TO 1550 RPM, FEEDS.00236 TO.132 IPR, THREADS. 2 TO 112 TPI, SIZE OF SPINDLE HOLE. 1-3/4", TAPER ATTACHMENT. YES, HARD WAYS. YES, THREAD DIAL. YES, CHIP PAN WITH COOLANT. YES, CHUCK. ...more
19" x 54" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, 3-jaw 12" chuck, 10 HP, 1985
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1985
SERIAL. 12E-562, MODEL. REGAL, YEAR NEW. 1985, SWING OVER BED. 19", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 54", HOLE THRU SPINDLE. 3", SPINDLE SPEEDS. (24) 40 TO 1600 RPM, FEEDS. (66).0018 TO.104 IPR, THREADS. (66) 2 TO 112 TPI, METRIC THREADING. YES, METRIC FEEDS. YES, STEADY REST 3 POINT ROLLER. ...more
19" x 54" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, 4-jaw 12" chuck, taper attachment, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 8F-2592MODEL. REGALSWING OVER BED. 19"SWING OVER CROSS SLIDE. 12-1/4"DISTANCE BETWEEN CENTERS. 54"HOLE THRU SPINDLE. 1-3/4"SPINDLE SPEEDS. 25 TO 1000 RPMFEEDS. (66).0018 TO.104 IPRTHREADS. (66) 2 TO 112 TPICHUCK. 12" 4-JAW CHUCKTAPER ATTACHMENT. YESHARDENED REPLACEABLE WAYS. YESTREAD DIAL. YESCHIP PAN WITH ...more
19" x 54" LeBlond #Servo-Shift, 15" 4-jaw chuck, L-1, 26-2010 RPM, Steady Rest, thread dial
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Engine Lathes
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Leblond
Model: SERVO-SHIFT
LEBLOND LATHE, MODEL: TOOL & DIE MAKERS LATHE, SERIAL NUMBER: 5HD 270, Swing Over bed: 19", Distance Between Centers: 54", Spindle Speeds: 26 - 2010 RPM, Spindle Nose: L1, Threading, Inch: 2 - 112 TPI, 10 HP Motor, Servo-Shift, 15" 4-Jaw Chuck, Steady Rest, Thread Dial, Trav-A-Dial, Approximate Weight: 5800 Lbs. ...more
19" x 54" LeBlond, Toolroom Lathe, 3-jaw chuck, 1550 RPM, tool holder
S and R Machines | Bristol, CT
Category: Engine Lathes
Seller: S and R Machines
Location: Bristol, CT
Mfr: Leblond
Model: TOOLMAKERS MODEL
eBayThe 19 x 54" LeBlond metal lathe is a high-quality toolmakers model designed for precise metalworking tasks. With a maximum spindle speed of 1550 RPM and a three-phase electric power source, this manual control lathe is perfect for various metalworking projects. Made of durable cast iron, this machine is built to ...more
19" x 54" LeBlond, servo shift engine lathe, 12" 3-jaw chuck, 3" hole thru spindle, inch/metric, taper, tailstock, 4" Steady Rest
Wisconsin Metalworking Machinery | Waukesha, WI
Category: Engine Lathes
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Leblond
, MAKE. LEBLOND, MODEL. SERVO SHIFT, SERIAL NUMBER. 11F195, AGE (YEAR)., SWING. 19", CENTER DISTANCE. 54", SWING OVER CROSS SLIDE. 13", HOLE THRU SPINDLE. 3", ELECTRICS. 480V, DIMENSIONS., WEIGHT., 12" 3-JAW CHUCK, INCH / METRIC THREADING, TAILSTOCK, TAPER ATTACHMENT, STEADY REST (4"), SUBJECT TO VERIFICATION.
19" x 59" Boeringer Mag #VDF48L, engine lathe, 2.08" spindle bore, 4-jaw 12" chuck, inch/metric, Sony 2-Axis digital read out
Aleco Machinery Sales | Milwaukee, WI
Category: Engine Lathes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Boeringer
Model: VDF48L
(1) Pre Owned Boeringer (MAG) VDF 48L Engine Lathe, Type 48S Serial Number: 70.1025.0025654, Swing Over Bed 19”, Distance Between Centers 59”, Spindle Bore 2.08”, Spindle Nose (Camlock Type) D1-8, Spindle Speeds 11.2 to 2240 RPM, Main Drive Motor 15 HP AC, Taper Attachment, 12" 4 Jaw Chuck, Inch / ...more
19" x 60" LeBlond #Regal, engine lathe, 12" swing over cross slide, 3-jaw 15" chuck, inch/metric, coolant chip pan, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 9E-530, MODEL. REGAL, MAXIMUM SWING OVER BED. 19-1/4", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. (12) 40-1600 RPM, HOLE THRU SPINDLE. 2-1/14", LONGITUDINAL FEEDS - ENGLISH. (48).0018-.104 IPR, LONGITUDINAL FEEDS - METRIC. (48).05-2.6 MMPR, THREADS ENGLISH. (48) 2-112 TPI ...more
19" x 72" Cincinnati Milacron #LR, engine lathe, 230 V., 3-phase
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Engine Lathes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Cincinnati Milacron
Model: LR
Product: 19 x 72 Lathe, Model Number: LR, Serial Number: 55024-73-16, Control AC Voltage: 115V, AC Voltage: 230 3 Phase, Control Diagram: 609482.
19" x 72" LeBlond #Regal, engine lathe, 13" SOCS, 3-jaw 12" chuck, taper attach., #69093
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 8F2316, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 72", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, FEEDS. (48).0018 TO.104 IPR, THREADS. (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-49/64", TAPER ATTACHMENT. YES, 3-JAW CHUCK. 12", HARDEN REPLACEABLE WAYS. YES ...more
19" x 72" LeBlond #Regal, 4-Jaw 12" chuck, 1-3/4"hole, L-2, chip guard, tailstock, thread dial, s/n #6E98, #A4428
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Leblond
Model: REGAL
Swing Over Bed 19" Swing Over Cross Slide 12" Distance Between Centers 72" Spindle Speeds (12) 25 - 1,500 RPM Spindle Nose L-2 Hole Thru Spindle 1-3/4" Threads: Inch (48) 2- 112 TPI Feeds (48) 0.0018"- 0.104" Cross Slide Travel 10" Dimensions ( L x D x H) 133"x 39" x 54" WEIGHT 5,600 Lbs. s Spindle Nose 1-3/4" ...more
JUST ADDED!
19" x 78" LeBlond #19-Regal, engine lathe, 7.5 HP, 25-1,600 RPM, L-1 spindle nose
Wheeler Machinery Sales | Pomona, CA
Category: Engine Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Leblond
Model: 19 REGAL
Swing over Bed & Carriage Ways: 19 1/4, Swing over Cross Slide: 12 1/4, Distance Between Centers: 78, Spindle Speeds (12): 25-1600 RPM, Spindle Bore: 1 49/64, Spindle Nose: L-1, Bed Length: 103, Bed Width: 14 3/8, Bed Depth: 11 1/2, Carriage Length on Bed: 21, Cross Slide Travel: 11 1/4, Feeds (48):.0023.123 ...more
19" x 78" LeBlond #19-Regal, engine lathe, 12.25" swing over cross slide, Bison 3-jaw chuck, 1.5" bore, 5 HP, 38-1500 RPM RPM, taper, tailstock, Steady Rest
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
Spec Sheet:, 19" X 78" LEBLOND REGAL ENGINE LATHE, SERIAL : 4E-816, MODEL : REGAL, SWING OVER WAYS : 19-1/2", SWING OVER CROSS SLIDE : 12-1/4", DISTANCE BETWEEN CENTERS: 78", SPINDLE SPEEDS: (12) 38 TO 1500 RPM, FEEDS : (48).002 TO.116 IPR, THREADS: (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE : 1-49/64", TAPER ...more
19" x 78" LeBlond #Makino, engine lathe, 12" swing over cross slide, 3 & 4-jaw 12" chuck, 2-Axis Newall digital read out, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO
SERIAL. 14E-330, MODEL. MAKINO, MAXIMUM SWING OVER BED. 19-1/4", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40-1600 RPM, HOLE THROUGH SPINDLE. 3-1/16", LONGITUDINAL FEEDS - ENGLISH. (48).0018-.104 IPR, LONGITUDINAL FEEDS - METRIC. (48).05-2.6 MMPR, THREADS. (48) 2-112 TPI, CHUCKS ...more
19" x 78" LeBlond #Makino, engine lathe, 12" swing over cross slide, 4-jaw 12" chuck, 2-Axis Newall DP7000 digital read out, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO
SERIAL. 15E-579, MODEL. MAKINO, MAXIMUM SWING OVER BED. 19-1/4", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40-1600 RPM, HOLE THROUGH SPINDLE. 3-1/16", LONGITUDINAL FEEDS - ENGLISH. (48).0018-.104 IPR, LONGITUDINAL FEEDS - METRIC. (48).05-2.6 MMPR, THREADS. (48) 2-112 TPI, CHUCK 4 ...more
19" x 78" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, 3-jaw 12" chuck, 10 HP, #74512
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1983
SERIAL. 6E936, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (25 TO 1000 RPM, FEEDS. (48).002 TO.116 IPR, THREADS. (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-49/64", TAPER ATTACHMENT. YES, 3-JAW CHUCK. 12", 4 JAW CHUCK. 16", FACE PLATE. 16" ...more
19" x 78" LeBlond #Regal, engine lathe, 38-1500 RPM, 5C collet closer, Bison 3-jaw chuck, 1-49/64" hole
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
, 19" X 78" LEBLOND REGAL engine lathe with 3-jaw chuck & 5C closer. s: 19.5" swing, 78" centers, 38-1500 RPM spindle speeds, 10 HP motor, thread dial, chip pan, and tailstock. Ideal for precision machining tasks. Serial: 2D1199. Used condition., Spec Sheet:, 19" X 78" LEBLOND REGAL ENGINE LATHE, SERIAL : 2D1199 ...more
19" x 78" Leblond Makino #Regal, Engine Lathe, 12-1/4" swing over cross slide, 3-1/16" spindle bore, 12" 3-jaw chuck, 17" face plate, 10 HP, 1600 RPM, 2-axis Acu-Rite digital read out, 440 Volt, 1992
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Leblond
Model: REGAL
Year: 1992
HERE WE HAVE:, NICE WELL TOOLED 19″ x 78″ LEBLOND MAKINO SERVO-SHIFT ENGINE LATHE, W/ 3-1/16” SPINDLE BORE, 2 AXIS ACU-RITE DIGITAL READOUT, MAKE: LEBLOND MAKINO, MODEL: 19″ REGAL, 19X78, SERIAL NUMBER: 15E-484, NEW IN: 1992, HOLE THRU SPINDLE: 3-1/16″, SWING OVER BED: 19-1/4″ ...more
19" x 78" Leblond #Regal, Engine Lathe, 10HP, 38-1500 RPM, 1-49/64" bore,
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
THIS LEBLOND REGAL IS A 19" X 78" ENGINE LATHE. ITS TECHNICAL CAPABILITIES INCLUDE A 19-1/2" SWING OVER WAYS AND A 12-1/4" SWING OVER THE CROSS SLIDE, WITH A GENEROUS 78" DISTANCE BETWEEN CENTERS. THE MACHINE IS A 10 HORSEPOWER MOTOR. THE SPINDLE OFFERS TWELVE SPEEDS RANGING FROM 38 TO 1500 ...more
19" x 78" LeBlond #Regal, Engine Lathe, 19-1/2" Swing, 1600 RPM, 12" 6-Jaw Chuck, 10 HP, 1980
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1980
SERIAL. 12E-128, MODEL. REGAL, YEAR NEW. 1980, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, FEEDS. (48).0018 TO.104 IPR, THREADS (INCH). 2 TO 112 TPI, THREADS (METRIC).25 TO 14 MM PITCH, DIAMETER OF SPINDLE HOLE. 3-1/16, CHUCK. 12" 6 ...more
19" x 78" LeBlond #Regal, engine lathe, 12-1/2" swing over cross slide, 3-jaw 10" chuck, roller type steady rest, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL.6E 443MODEL. REGALSWING OVER BED. 19"SWING OVER CROSS SLIDE. 12-1/2"DISTANCE BETWEEN CENTERS. 78"SPINDLE SPEEDS. 25 TO 1000 RPMHOLE THROUGH SPINDLE. 1-13/16"THREADS. 2 TO 112 TPIFEEDS.0023 TO.104 IPRTHREAD DIAL. YESCHUCK. 10" 3 JAWSTEADY REST. ROLLER TYPEMOTOR. 7-1/2 HORSEPOWER.
19" x 78" LeBlond #Regal, engine lathe, 13" swing over cross slide, 4-jaw 15" chuck, 6" roller type steady rest
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 5E290, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40 TO 1000 RPM, FEEDS. ().0023 TO.132 IPR, THREADS. () 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-3/4", 4-JAW CHUCK. 15", TAPER ATTACHMENT. YES, STEADY REST. 6" ROLLER TYPE, HARDEN ...more
