1 / 9
Click to zoom in
1 / 9
For Sale by Vander Ziel Machinery Sales
Surplus Record Dealer Since 2006
Location: Alto, MI
Contact Andy VanderZiel
Phone Number: 616...> Show Phone Number 616-868-1111
Let the seller know you found their listing on Surplus Record!
$5,500 USD
Description
LeBlond 19" x 50" Regal Lathe, 1 49/64" Spindle Bore
Serial # 7E-1660
Asset # 16419
Specifications:
Swing over Bed & Carriage Ways 19 1/4"
Swing over Cross Slide 12 1/4"
Distance Between Centers 50"
Spindle Speeds (12) 40-1600 RPM
Spindle Bore 1 49/64"
Spindle Mores Taper No. 4
Spindle Nose L-1
Headstock Length on Bed 21 1/8"
Bed Length 10'3"
Bed Width 14 3/8"
Bed Depth 11 1/2"
Carriage Length on Bed 21"
Cross Slide Travel 11 1/4"
Feeds (48) .0023 - .123
Threads (48) 2 - 112
Leadscrew Diameter and TPI 1 3/16", 4
Tailstock Spindle Diameter 2 7/16"
Tailstock Center 4 MT
Tailstock Length on Bed 12 3/4"
Motor 7 1/2 HP, 1800 RPM
Approx. Weight 4,750 lbs.
Preliminary Specifications - Subject to Verification
Inquire Further with Vander Ziel Machinery Sales!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
36" x 72" LeBlond #Regal, Engine Lathe, 28" socs, 3" bore, 70-1080 RPM, 24" 4-jaw chuck, inch/metric, 10 HP, 208 V., 1981
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Leblond
Model: REGAL
Year: 1981
Size 36"x72"cc Make LEBLOND Year 1981, ONE USED - 36x 72 cc LEBLOND Engine Lathe, Model: REGAL, Serial Number: 7H-1161, New 1981, 36 Swing Over Bedways, 28 Swing Over Cross Slide, Hardways, Inch/ Metric Threading, Spindle Speeds from 70 to 1080 RPM, 3 Spindle Thru Hole, 24 Diameter CUSHMAN 4-Jaw Chuck, 4 Way Toolpost ...more
JUST ADDED!
13" LeBlond #Regal, Engine Lathe, quick-change gearbox, 3-jaw chuck, cabinet base
Category: Engine Lathes
Seller: Heavy Wall Consulting
Location: La Pine, OR
Mfr: Leblond
Model: REGAL
- LeBlond Regal, 13" swing (cast on headstock), - Quick-change gearbox, - 3-jaw chuck (see photos), - Cabinet base, Bed length, distance between centers, motor, and run status are not confirmed. Tooling, steady rest, and tailstock accessories are only included if shown in the photos., Located in La Pine, OR (near ...more
JUST ADDED!
15" x 50" LeBlond #REGAL, Servo Shift Lathe, 9.5" swing over cross slide, 1.625" bore, 45-1800 RPM, taper att., 8" 3-jaw chuck, 5 HP
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
This LeBlond Regal 15" x 50" servo shift lathe has a 15" swing, a swing over the cross slide of 9.5" and 50" between centers. The spindle bore is 1.625" and there are 12 spindle speeds from 45-1800 RPM, driven by a 5 HP main drive motor. It is a taper attachment, quick change toolpost, coolant pan and pump, tailstock ...more
15" x 32" LeBlond #Regal, engine lathe, 10" swing over cross slide, 3-jaw 10" chuck, 5 HP, splash guards
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 9C-954, MODEL. REGAL, SWING OVER BED. 15", SWING OVER CROSS SLIDE. 10", DISTANCE BETWEEN CENTERS. 32", SPINDLE SPEEDS. (12) 45 TO 1,800 RPM, SPINDLE NOSE. D1-6, HOLE THROUGH SPINDLE. ", CHUCK 3 JAW. 10", THREADS INCH. (48) 2 TO 112 TPI, THREADS METRIC. (40) 0.25 TO 14 MM, FEEDS. (48) 0.0018" TO 0.104", STEADY ...more
21" x 102" Leblond #Regal, Engine Lathe, 12'-3" x 14-3/8" bed, 13" socs, 2-7/16" spindle diameter, 12" 6-jaw chuck, 10 HP, 230 Volts, 3PH, 1990
Category: Engine Lathes
Seller: Hildebrand Machinery Co Inc
Location: York, PA
Mfr: Leblond
Model: REGAL
Year: 1990
