251 - 300 of 965 listings
16" x 54" Monarch #16-Series-50, engine lathe, 4-jaw 10" chuck, 7.5 HP, hard ways, #50813
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 16-SERIES-50
SERIAL. 50832, MODEL. 16, SERIES. 50, SWING OVER WAYS. 16", SWING OVER CARRIAGE. 10", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. (20) 30 TO 1800 RPM, THREADS. (66) 2 TO 120 TPI, FEEDS. (66).0017 TO.1018 IPR, SPINDLE HOLE. 1-3/4", CHUCK. 10" 4 JAW, TAPER ATTACHMENT. YES, THREAD DIAL. YES, HARD WAYS. YES, CHIP PAN. ...more
16" x 54" Monarch #16C, engine lathe, 2-Axis digital read out, steady rest, chucks, live center, more
MachineCo | Montreal, QC
Category: Engine Lathes
Seller: MachineCo
Location: Montreal, QC
Mfr: Monarch
Model: 16C
“Great condition, well maintained by experienced operators, normal wear from use!”, 16″ x 54″ Monarch lathe, FULLY Equipped DRO, Taper, more., Manufacturer. Monarch Lathe Co. ( Sydney, NY, USA), Model:. 16C, Swing. 16″ (nominal), Swing (actual). 18.5”, Swing (over crosslide). ...more
16" x 60" GMC #GML-1660-AT, lathe, 5 Hp, 2.0625" bore, automatic lube, digital read out, 9.5" swing over cross slide, 21.75" swing gap, 12 speed 50-2k RPM spindle, D1-6, 8" 3-jaw chuck, 14" face, steady & follow rest
Wheeler Machinery Sales | Pomona, CA
Category: Engine Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: GML-1660-AT
Machine Standard s and Equipment:, Made in Taiwan, ISO 9001 certified, Large spindle bore 2-3/16, Heavy Duty spindle D1-6, High Tensile cast iron FC25, Heavy Duty guideway width 10, Heavy Duty main motor 5HP, 12 spindle speeds from 50-2,000 rpm, 32 kinds of inch threads, and 32 kinds of metric threads, Threading and ...more
16" x 60" Jet #GH-166ZX, engine lathe, 9" swing over cross slide, inch/metric threads, 3-jaw 10" chuck, 7.5 HP, 2009
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Jet
Model: GH-166ZX
Year: 2009
SERIAL. 0912282X2146, MODEL. GH-1660ZX, YEAR NEW. 2009, SWING OVER WAYS. 16", SWING IN GAP. 25-1/2", LENGTH OF GAP. 12", SWING OVER CROSS SLIDE. 9", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. (12) 25 TO 1800, DIAMETER OF SPINDLE HOLE. 3-1/8", ENGLISH THREADS. (40) 1-5/8 TO 112 TPI, METRIC THREADS. (27) 0.2 TO 6 ...more
16" x 60" LeBlond #1660, engine lathe, 11" swing over cross slide, taper attachment, thread dial, 3 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: 1660
SERIAL. 46916, MODEL. 1660, SWING. 16", CENTERS. 60", SWING OVER CROSSSLIDE. 11", TAPER ATTACHMENT. YES, THREAD DIAL. YES, SPEEDS. 45 TO 1800 RPM, COLLET CHUCK. YES, CHIP PAN. YES, MOTOR. 3 HORSEPOWER.
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
JUST ADDED!
16" x 60" LeBlond #RKL1560V, toolroom lathe, 10" swing over cross slide, 6-jaw 8" chuck, 7.5 HP, foot brake, 2011
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Leblond
Model: RKL1560V
Year: 2011
Size 16"x60"cc Make LEBLOND Year 2011, ONE USED - 16” x60”cc LEBLOND Toolroom Engine Lathe, Model: RKL1560V, Serial Number: 16611052261, New 2011, 16” Swing Over Bedways, 10” Swing Over Cross Slide, 22” Swing in Removable Gap, Hardways, Inch/Metric Threading, 2 1/8” Spindle thru ...more
16" x 60" Lodge & Shipley #16, 12" chuck, 1-3/4" spindle hole, 1160 RPM, 10 HP, Steady Rest
N & R Machine Sales | Navasota, TX
Category: Engine Lathes
Seller: N & R Machine Sales
Location: Navasota, TX
Mfr: Lodge & Shipley
Model: 16
16" x 60" Precision Matthews #PM-1660TL, Heavy Duty Ultra Precision Lathe
Precision Matthews Machinery Co | Coraopolis, PA
Category: Engine Lathes
Seller: Precision Matthews Machinery Co
Location: Coraopolis, PA
Mfr: Precision Matthews
Model: PM-1660TL
Year: 2026
Main s of PM-1660TL:, Highest Quality Lathes, Made in TAIWAN Large 2-1/2″ Spindle Bore clear through spindle for through-, headstock work (Actual dimension 2.55″, will pass a 2-1/2″ bar) No change gears needed for the entire range of Inch and Metric thread pitches Inch AND Metric thread cutting ...more
16" x 60" ROCKFORD (Machine Tool) " Economy" HX. 1960. 9" OCS. 1-9/16" hole. 10"-3 jaw. 5hp. Wired 220/440/3/60. 32-804 rpm. #4 Morse tapers. FOB 61109.
WINN/DIXI Machine Tool Sales | Rockford, IL
Category: Engine Lathes
Seller: WINN/DIXI Machine Tool Sales
Location: Rockford, IL
Mfr: Rockford
Model: HX
Year: 1960
JUST ADDED!
16" x 60" Bridgeport Romi #16-8, engine lathe, 12" 6-jaw chuck, 2.25" hole, D1-6, 22.4-1800 RPM, #4MT
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Romi
Model: 16-8
16" x 60" SKB #1660, gap bed engine lathe, 3-jaw chuck, tool holder, chanhge gears, 1988
Equipment Hub | Decatur, GA
Category: Engine Lathes
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Skb
Model: 1660
Year: 1988
Stock #: 210250105, Location: Decatur, GA, Brand: SKB, Model: 1660, Serial #: 2566, Year: 1988, Approx. Shipping Weight: 5,500 Lbs., Approx. Shipping Dimensions: 9' L x 4' W x 5' H, Skidding Fee: Skidding Unavailable, Swing over bed: 15-7/8", Swing over carriage: 8 1/2", Distance Between Centers: ...more
16" x 60" South Bend #400, lathe, 8.6" swing over cross slide, 3-jaw chuck, 2" spindle hole, thread dial, 3 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: South Bend
Model: 400
SERIAL. 2127MODEL. 400SWING OVER WAYS. 16"SWING OVER CROSS SLIDE. 8.6"DISTANCE BETWEEN CENTERS. 60"SPINDLE SPEEDS. 59 TO 1400 RPMCHUCK. 3 JAWFEEDS (ENGLISH). 0.0035 TO 0.0157 IPRCROSS FEEDS. 0.0007 TO 0.032 IPRTHREADS (ENGLISH). 4 TO 224 TPICROSS TRAVEL. 9-1/2"TAILSTOCK TAPER. 3 MTSPINDLE HOLE. 2"THREAD DIAL. ...more
16" x 60" Summit #16X60, gap bed engine lathe, 9.375" swing over cross slide, 6-jaw chuck, 2-Axis AcuRite digital read out, 2007
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Summit
Model: 16X60
Year: 2007
SERIAL. 36312, MODEL. 16X60, YEAR NEW. 2007, SWING OVER WAYS. 16", SWING IN GAP. 25.125", SWING OVER CROSS SLIDE. 9.375", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. (12) 20 TO 2000 RPM, ENGLISH THREADING. (56) 4 TO 60 TPI, ENGLISH FEEDS. (56).0004 TO.056 IPR, METRIC THREADS. (35).5 TO 120 TPMM, LONGITUDINAL FEEDS. ...more
16" x 60" Victor #1660B, Engine Lathe, 9-1/2" swing over cross slide, 1800 RPM, tailstock, inch/metric thread, 7.5 HP
Norman Machine Tool Ltd | Baltimore, MD
Category: Engine Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Victor
Model: 1660B
Victor 16″ x 60″ Gap Bed Engine Lathe, 1660B – ON HOLD 05/07/2026, Inventory # 10062, Model: 1660B, S/N: AA113356, Swing Over Bed: 16 1/8″, Swing Over Cross Slide: 10 1/4″, Distance Between Centers: 60″, Swing Over Gap: 23″, Width of Gap: 11 3/8″, Width of Bed: ...more
JUST ADDED!
16" x 60" Victor #1660E, gap bed engine lathe, w/ tooling
TNT Industrial | Orange, CA
Category: Engine Lathes
Seller: TNT Industrial
Location: Orange, CA
Mfr: Victor
Model: 1660E
Victor 1660 Lathe. Victor 1660 Lathe This versatility eliminates the need for a dedicated oversized lathe and provides cost savings. These lathes are designed with a removable section, or gap, in the bed of the machine, allowing for the machining of larger workpieces..
16" -18" x 71" -80" LeBlond #Regal, metal working lathe, 1-17/32" spindle bore, 1930
Global Machine Brokers LLC | Guilford, CT
Category: Engine Lathes
Seller: Global Machine Brokers LLC
Location: Troy, NY
Mfr: Leblond
Model: REGAL
Seller estimates:, Swing over bed is between 16-18 inches, distance between centers is around 71-80inches, Spindle bore around around 1 17/32”.
16" x 72" LeBlond, engine lathe, 3-jaw 10" chuck, 6" roller type steady rest, #70706
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
SERIAL. 4HD537, SWING OVER WAYS. 19", SWING OVER CARRIAGE. 12", DISTANCE BETWEEN CENTERS. 84", SPINDLE SPEEDS. (16) 26 TO 2010 RPM, FEEDS. (96).0008 TO.132 IPR, THREADS. (48) 2 TO 112 TPI, SPINDLE HOLE. 2-3/4", THREAD DIAL. YES, CHIP PAN. YES, HARD WAYS. YES, STEADY REST. 6" ROLLER TYPE, TAPER. YES, CHUCK. 10" 3 JAW ...more
JUST ADDED!
16" x 76" South Bend, engine lathe, 9" 3-jaw chuck, 1.5" bore
HGR24 | Euclid, OH
Category: Engine Lathes
Seller: HGR24
Location: Euclid, OH
Mfr: South Bend
Inventory No. 0426-165-0003 Manufacturer South Bend Name Lathe Arrival Date 05-14-2026 Dimensions L x W x H (inches) 106 x 34 x 56 Capacity 16" X 76" Weight (lb.) 2285 Category Machine Tools Condition Used Available Quantity 1 Item 9" 3 Jaw Chuck, Bore: 1.5", Made In Usa.
16" x 78" Lodge & Shipley engine lathe, 10-5/8" SOCS, taper att., 1160 RPM, 1955, #53702
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lodge & Shipley
Model: 16 X 078
Year: 1955
SERIAL. 42920, SWING OVER BED. 16-1/2", SWING OVER CROSS SLIDE. 10-5/8", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (24) 14 TO 1160 RPM, SPINDLE HOLE. 1-3/4", SPINDLE NOSE. L-1, FEED RANGE. (55).029" TO.187" PER/REV, THREADS. (55) 1 TO 64 TPI, TAPER ATTACHMENT. YES, THREAD DIAL. YES, MOTOR. 5 HORSEPOWER.
16" x 80" Bridgeport Rmi #16-8, engine lathe, 9" swing over cross slide, inch/metric, 3 & 4-jaw chuck, 1986
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Bridgeport
Model: 16-8
Year: 1986
Size 16"x80"cc Make BRIDGEPORT ROMI Year 1986, ONE USED - 16” x80”cc BRIDGEPORT ROMI Engine Lathe, Model: 16-8, Serial Number: 060279B, New 1986, 16” Swing Over Bedways, 9” Swing Over Cross Slide, 23” Swing in Removable Gap, Hardways, Inch/Metric Threading, Spindle Speeds from 56 to 1120 ...more
16" x 80" DoAll #16, engine lathe, 10" swing over cross slide, inch/metric, taper, 4-jaw 12" chuck, swivel compound, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: 16
SERIAL. 784019611848, MODEL. 16, SWING OVER WAYS. 16", SWING OVER CROSS SLIDE. 10", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. (18) 40 TO 2000 RPM, HOLE THRU SPINDLE. 2-5/8", ENGLISH FEEDS. (38).0016 TO.028 IPR, ENGLISH THREADS. (38) 2 TO 72 TPI, METRIC THREADS. (39).2 TO 14 TPMM, TAPER. YES, CHUCK. 12" 4 JAW ...more
16" x 80" Leblond #NE-16, 18" chuck, 1-3/4" spindle hole, taper, serial #683, #81763
Smith Machinery Co | Ames, IA
Category: Engine Lathes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Leblond
Model: NE-16
Year: 1952
SWING OVER BED ------------------------- 16 in, SWING OVER CROSS SLIDE ----------------- 10 in, THROUGH HOLE --------------------------- 1 3/4 in, SPINDLE SPEED (NUMBER) ----------------- 24, SPINDLE SPEED (RANGE) ------------------ 16-1,010, CROSS SLIDE TRAVEL --------------------- 80 in, TAILSTOCK BARREL DIAMETER ...more
JUST ADDED!
16" x 80" Webb #16X40, Engine Lathe, 12" chuck, 28-1350 RPM, AccuRite III digital read out, tool post, Steady Rest
Source Machinery Sales | Fridley, MN
Category: Engine Lathes
Seller: Source Machinery Sales
Location: Fridley, MN
Mfr: Webb
Model: 16X40
Webb Engine Lathe, Model WL-520, 20.5" Swing Over Bed, 80" Distance between centers, 12" Chuck, Accu-rite III Digital Read Out, 28-1350 Spindle Speed, Tool Post, Steady Rest.
16" x 102" American Pacemaker #16X102, engine lathe, 25-1500 RPM, 15" 4-Jaw chuck, Steady Rest
Inter-Plant Sales | Hugo, MN
Category: Engine Lathes
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: American
Model: 16X102
16" x 106" LeBlond, Lathe, w/Tailstock & Compound Rest, 15" 4-Jaw Chuck, 2" Bore, 230 V
HGR24 | Euclid, OH
Category: Engine Lathes
Seller: HGR24
Location: Euclid, OH
Mfr: Leblond
Inventory No. 0226-108-0004 Manufacturer Leblond Name Lathe Arrival Date 03-11-2026 Dimensions L x W x H (inches) 166 x 46 x 67 Capacity 106" X 16" Electrical 3/60/230 Weight (lb.) 4750 Category Machine Tools Condition Used Available Quantity 1 Serial No. 8F 2390 Item W/tailstock, Compound Rest, 15" 4 Jaw Chuck, 2" ...more
16-1/8" x 40" Nardini #MS-1640, Engine Lathe, 10-1/2" swing over cross slide, 2500 RPM, 1.9" bore, inch/metric thread, digital read out, Follow Rest, tailstock, 8" chuck, AS IS
Norman Machine Tool Ltd | Baltimore, MD
Category: Engine Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Nardini
Model: MS-1640
Nardini ‘Mascote’ 16″ x 40″ Engine Lathe, MS-1640, Inventory # 10008, Model: MS-1640 ‘Mascote’, S/N: D5JFL141, *Please Note: Lathe runs as it should. DRO works, but X-axis scale is damaged, and it errors (as shown in the photos & video). There are no replacement parts readily ...more
16.5" x 54" Monarch #61, engine lathe, 12" chuck, 1-1/2" hole, 28-1200 RPM, Aloris 2-way toolpost, 6" Steady Rest, 14" face plate, 1951
MD Equipment Services LLC | Crooked River, OR
Category: Engine Lathes
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Monarch
Model: 61
Year: 1951
Manual Engine & Toolmaker's Lathe, OEM: Monarch Machine Tool Company (Ohio), Model: Series 61, Date of Manufacture: April 1951, Serial No.: 33900, Electrics: 220-440 Volt, 60 Cycle, 3 Phase, s and,.Actual Swing: 16.5",.Distance Between Centers: 54",.Speed Range (16): 28 - 1200 RPM,.Quill Travel ...more
16-1/2" x 54" Rockford #16-economy, engine lathes, 16-1/2" swing over ways, 9" swing over cross slide, 3 jaw chuck, thread dial, steady rests, spindle forward & reverse, taper, coolant, 5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rockford
Model: 16-ECONOMY
SERIAL. 12354, MODEL. 16 ECONOMY, SWING OVER WAYS. 16-1/2", SWING OVER CROSS SLIDE. 9", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. 16 TO 804 RPM, FEEDS.0075 TO.060 IPM, THREADS. 4 TO 56 TPI, DIAMETER OF SPINDLE HOLE. 1-9/16", 3 JAW CHUCK. 12-1/2", THREAD DIAL. YES, STEADY RESTS 3 POINT. YES, SPINDLE FORWARD AND ...more
16.5" x 60" Romi #Tormax-18-8, engine lathe, 10" Bison 3-jaw chuck, 2.75" bore, D1-6 spindle mount, 90-1800 RPM, Newall NMS300 digital read out, inch/metric, work light, 1996
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Romi
Model: TORMAX-18-8
Year: 1996
ROMI TORMAX 16-8 16” x 60” Engine Lathe DRO 1996’ #7932, ROMI TORMAX 16-8 16” x 60” Engine Lathe DRO 1996’ #7932, Reference # 7932, Model # TORMAX 16-8, Serial # 002-080905-193, Year of manufacture- 7/1996’, Swing over ways- 16-1/2”, Swing over cross slide- 9-5/8” ...more
16-1/2" x 80" Bridgeport Romi #16-8, Engine Lathe, 9-5/8" swing over cross slide, 1800 RPM, 2-1/4" bore, quickchange toolpost, threading
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Romi
Model: 16-8
THE BRIDGEPORT ROMI 16-8 ENGINE LATHE S A 16.5-INCH SWING AND AN 80-INCH DISTANCE BETWEEN CENTERS. IT HAS A SWING OVER THE CROSS SLIDE OF 9 5/8 INCHES AND A 2 1/4-INCH HOLE THROUGH THE SPINDLE. THE WIDTH OF THE BED MEASURES 13 3/8 INCHES, AND IT USES A D1-6-INCH SPINDLE NOSE. THE MACHINE OPERATES WITH A SPINDLE SPEED ...more
16.5" x 102" LeBlond #14, heavy duty engine lathe, 12" chuck, 3-jaw, steady & follow, power rapid traverse
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Leblond
Model: 14
14"/16.5" x 102" LEBLOND "HEAVY-DUTY" ENGINE LATHE w/TAPER ATTACHMENT & DIGITAL READOUTS, Series "14 HEAVY-DUTY", Newall DP7 Digital Readouts, Taper Attachment, 12" 3-Jaw Chuck, Steady Rest - Follow Rest, Hard Ways, Threading Dial, CATALOG :, Hole Thru Spindle 1.34", Swing Over Bed Ways, Rated 14", Swing Over Bed ...more
16.5" x 102" Leblond, Heavy-Duty Engine Lathe, 9.75" swing over cross slide, 1.34" bore, Taper, 1250 RPM
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
THE LEBLOND SERIES "14 HEAVY-DUTY" ENGINE LATHE OFFERS A 16.5-INCH ACTUAL SWING OVER THE BED WAYS AND A 9.75-INCH SWING OVER THE CROSS SLIDE, WITH A 102-INCH DISTANCE BETWEEN CENTERS. THE SPINDLE S A 1.34-INCH BORE AND PROVIDES 24 SPEEDS RANGING FROM 25 TO 1250 RPM. THIS MODEL IS A TAPER ATTACHMENT, A ...more
17" x 22" Seiki #XL, gap bed engine lathe, inch/metric threading, 2-1/8"spindle bore, 7.5 HP, coolant system
Equipment Hub | Decatur, GA
Category: Engine Lathes
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Seiki
Model: XL
Stock #: 190250032, Location: Decatur, GA, Brand: Seiki, Model: XL, Serial #: 75721, Approx. Shipping Weight: 5,000 Lbs., Approx. Shipping Dimensions: 130" L x 60" W x 58" H, Skidding Fee: Skidding Unavailable, Swing Over Ways: 17?, Distance Between Centers: 72?, Spindle Speeds: 50 - 1800 R.P.M., Inch ...more
17" x 30" South Bend #Turn-Nado, 8" chuck, 2-1/2" spdl hole, #4MT, 6" spindle diameter, #82397
Smith Machinery Co | Ames, IA
Category: Engine Lathes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: South Bend
Model: TURN-NADO
Year: 1969
SWING ------------------------------------- 17 in, SWING OVER CROSS SLIDE -------------------- 10-1/2 in, HOLE THROUGH SPINDLE ---------------------- 2-1/2 in, SWING OVER COMPOUND SLIDE ----------------- 4 1/4 in, SPINDLE NOSE ------------------------------ 8 in D-1 CAMLOCK, WIDTH ------------------------------------- ...more
17" x 33" Cadillac Mori Seiki #1733, engine lathe, 10" 3-jaw chuck, 2-9/32" bore, 32-1800 RPM, D1-6, inch/metric
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Mori Seiki
Model: 1733
YAM 17” x 33” Engine Lathe Cadillac Mori #7563, YAM 17” x 33” Engine Lathe Cadillac Mori #7563, Model # 1733, Serial # 058282, Swing over bed- 17”, Swing over cross slide- 10”, Distance between centers- 33”, Spindle speeds- (12) 32 – 1,800 R.P.M., Spindle taper- D1-6 ...more
17" x 36" LeBlond #17, engine lathe, 1.5" bore, 5 HP, 25-1000 RPM, #4MT
Alternative Machine Tool Inc | Dousman, WI
Category: Engine Lathes
Seller: Alternative Machine Tool Inc
Location: Dousman, WI
Mfr: Leblond
Model: 17
Swing Over Bed Ways: 17.0” Swing Over Cross Slide: 11.0” Distance Between Centers: 36.0” Spindle Bore: 1.5” Spindle Horsepower: 5 Hp Spindle Speed: (12) 25 – 1,000 RPM Tailstock Taper: 4MT Voltage: 220/3/60 Machine Weight: 3,500 lbs.
17" x 36" Mori Seiki #MS-850G, engine lathe, 12" 4-jaw chuck, 10" 3-jaw chuck, 2-1/8" bore, A1-6, Trav-A-Dial, Steady Rest
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Mori Seiki
Model: MS-850G
Capacity 17” X 36” Swing Over Cross Slide 9-3/4" Distance Between Centers 32" Spindle Speeds (12) 32 -1,800 RPM Spindle Nose A1-6 Thread: Inch (40) 4-80 TPI Feeds (40) 0.0018" - 0.025" Weight (Approx.) 4,500 LBS. Horsepower 5 H.P. s Trav-A-Dial Foot Brake 12” 4-Jaw Chuck Steady Rest 2 1/8” Thru Spindle Bore ...more
17" x 39" Romi #C420, CNC teach engine lathe, 2013, #14423
Yoder Brothers Machinery | Toledo, OH
Category: Engine Lathes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Romi
Model: C420
Year: 2013
SERIAL. 016-016390-448 NEW. 2013 Model. C420 Height of centers. 8.5″ Distance between centers. 39″ Swing over bed. 17″ Swing over cross slide. 7.85″ Main spindle nose. A2-5″ Max. spindle speeds. 4.000 rpm AC main motor. 12.5 hp / 9 kw Control. ...more
17" x 40" Acer #Dynamic-1740G, gap bed engine lathe, 9-5/8" swing over cross slide, inch/metric, 3-jaw 10" chuck, 2000
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Acer
Model: DYNAMIC-1740G
Year: 2000
SERIAL. 116070200, MODEL. DYNAMIC 1740G, YEAR NEW. 2000, SWING OVER WAYS. 17", SWING IN GAP. 26", SWING OVER CROSS SLIDE. 9-5/8", DISTANCE BETWEEN CENTER. 40", SPINDLE SPEEDS. (12) 50 TO 1800 RPM, THREADS (ENGLISH). (36) 4 TO 56 TPI, THREADS (METRIC). (22) 0.5 TO 7 MMPI, FEEDS (ENGLISH).002 TO 0.028 IPR, FEEDS ...more
17" x 40" Jet #EGH-1740, Newall DP700 digital read out, taper attachment, collet closer, brand new
Nevins Machinery Concepts Inc | South Easton, MA
Category: Engine Lathes
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Jet
Model: EGH-1740
Size 17 x 40, Accessory 1 Taper Attachment, Accessory 2 Collet Closer, Digital Readout Newall DP700, Swing Over Bed (In.) 17, Swing Over Cross Slide (In.) 11, Swing Through Gap (In.) 24 1/2, Length of Gap (In.) 7-2/3, Distance Between Centers (In.) 40, Spindle Bore (In.) 3-1/8, Spindle Mount D1-6, Spindle Taper with ...more
17" x 40" Milltronics #1740, CNC flat bed lathe, 2-1/8" hole thru spindle, Centrian 6 Control, Aloris quick change tool post
Greenway & Associates Ltd | Orange City, IA
Category: Engine Lathes
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Milltronics
Model: 1740
, Centurian 6 control, 6 jaw chuck, Aloris quick change tool post, Chip pan, Automatic lubrication.
JUST ADDED!
17" x 40" Nardini #MS-1440, Mascote Gap-Bed Engine Lathe, 2.5" bore, 8" 3-jaw chuck, tailstock, Acu-Rite Turnmate digital read out
HGR24 | Euclid, OH
Category: Engine Lathes
Seller: HGR24
Location: Euclid, OH
Mfr: Nardini
Model: MS-1440
17" x 40" Top One USA #430N, gap bed engine lathe, serial #00005
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Top One Usa
Model: 430N
SERIAL. 00005, MODEL. 430N, SWING OVER WAYS. 17", SWING IN GAP. 25", SWING OVER CROSS SLIDE., DISTANCE BETWEEN CENTERS. 40", SPINDLE SPEEDS. 50 TO 1800 RPM, THREADS. 1 TO 56 TPI, THREADS METRIC. 0.5 TO 6 MM, FEEDS.002 TO.028 IPR, FEEDS METRIC.0.05 TO 0.70 MM, CHUCK 3 JAW. 8", CHUCH 4 JAW 12" NO TOP JAWS, STEADY REST 3 ...more
17" x 40" Webb, engine lathe
Bay Area CNC Machinery | Walnut Creek, CA
Category: Engine Lathes
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Webb
Condition UsedStock Number 47518888063.
17" x 48" DoALL/Romi #17, toolroom engine lathe, 12" 3-jaw chuck, 3-1/8" hole thru spindle, D1-8 Camlock spindle, Accu-Rite 2-Axis digital read out, inch/metric
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Model: 17
, The DoALL/Romi 17 is ly described as a rigid, powerful lathe designed for toolroom accuracy while acting as a production workhorse., Spec Sheet:, DoALL Engine Lathe, Model 17, 17" Swing, 48" Between Centers, 9.625" Swing Over Cross-Slide, D1-8" Camlock Spindle Nose, 3-1/8" Hole Thru Spindle, 10 HP Motor, 40 - 2120 ...more
17" x 50" Mori Seiki, lathe, 3-jaw 10" chuck, 2" spindle bore
McKean Machinery Sales Inc | Cleveland, OH
Category: Engine Lathes
Seller: McKean Machinery Sales Inc
Location: Cleveland, OH
Mfr: Mori Seiki
Item #: CB4965 MORI SEIKI 17" X 50" LATHE, -- SERIAL: 13074 -- 10" - 3 JAW -- 2" SPINDLE BORE -- MS 1250G -- WGT: PRICE: FOB CLEVELAND, OH - - - $6,950.
JUST ADDED!
17" x 53" Clausing #Triumph-V/S, engine lathe, 1-1/4" bore, tailstock, 10 HP, 415 V., 2003
HGR24 | Euclid, OH
Category: Engine Lathes
Seller: HGR24
Location: Euclid, OH
Mfr: Clausing
Model: TRIUMPH V/S
Year: 2003
Inventory No. 0821-115-4266 Manufacturer Clausing Model No. TRIUMPH V/S Name Lathe Arrival Date 05-04-2026 Dimensions L x W x H (inches) 107 x 51 x 80 Capacity 17”X 53” Electrical 3/60/415 Weight (lb.) 3650 Category Machine Tools Condition Used Available Quantity 1 Serial No. VT1416/47 Make Year 2003 Item ...more
17" x 54" Cincinnati #17-Hydrashift, engine lathe, 10" 3-jaw chuck, tailstock, quick change tool post
G-2000 | Toledo, OH
Category: Engine Lathes
Seller: G-2000
Location: Toledo, OH
Mfr: Cincinnati
Model: 17-HYDRASHIFT
MANUFACTURER.: CINCINNATI, MODEL.: #17 LR HYDRASHIFT, SERIAL NUMBER.: 1W3-5T-034, SWING.: 17", SWING OVER CROSS SLIDE.: 9-1/2", DISTANCE BETWEEN CENTERS.: 54", SPINDLE NOSE.: #4 MORSE, SPINDLE SPEEDS.: 12, SPINDLE SPEED RPM RANGE.: 37 – 1470, THREADING RANGE [48].: 1.5 – 92 TPI, FEED RANGE [IPR].: 0.0019 ...more
17" x 54" Monarch #612, Engine Lathe, 16" swing over cross slide, 10 Hp, 14-1750 Rpm, 2" bore, inch threading
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Monarch
Model: 612
THE MONARCH 612 IS A HEAVY-DUTY ENGINE LATHE FEATURING A 17-INCH SWING AND 54 INCHES BETWEEN CENTERS, WITH A 16-INCH SWING OVER THE CROSS SLIDE. IT IS POWERED BY A 10 HP MOTOR REQUIRING 240V 3 PHASE ELECTRICAL SUPPLY. THE MACHINE PROVIDES 18 SPINDLE SPEEDS, WITH A LOW RANGE OF 14 TO 146 RPM AND A HIGH RANGE OF 169 TO ...more
17" x 54" Monarch #612, engine lathe, 12" 4-jaw chuck, 2" bore, D1-6, taper attachment, Aloris quick change toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Monarch
Model: 612
, Explore precise and durable machining with the 1960 Monarch 612 Engine Lathe. Featuring 20" swing, 78" centers, 2.0625" spindle bore, and 30 hp motor. 18 spindle speeds, Aloris toolpost, coolant system, and threading capabilities., Spec Sheet:, 17" x 54" Monarch 612 Engine Lathe w/Taper, 17" Swing, 54" Between ...more
