Buy or Sell Your Circular Cold Saw Machine

Cutoff Diameter 8mm 1st Die KO 115mm 2nd Die KO 60mm Pieces Per Minute 50-120 Electrics 15 HP Motor and Controls Weight 22000 Lbs., Exit conveyor, wire straightener, Brankamp Model ECO 600 process monitor.

Imcar Sirio 315.

Cutoff Diameter 1/8" Shank Length 3/4" Cutoff Length 1-1/4" Pieces Per Minute 250 Electrics 2.2 KW 500V 50 HZ AC Motor & Controls Weight 3,000# Dimensions 2-1/2' X 5'.

Cutoff Diameter 8mm Maximum Shank Length 60mm Maximum Cutoff Length 75mm 1st Die KO 85mm Max Length Fully Tubular Aluminum Rivet 25mm Pieces Per Minute 250 Electrics AC Motor and Controls Weight 10,000 Kg.

Cutoff Diameter 22mm (60kg/cm2) Cutoff Length 155-15mm Die Case Diameter x L 110 x 200mm all station Quill OD x L 75 x 95mm PKO Stroke 40mm all station Pusher Die OD 30mm Punch OD Diameter x L 80 x 145mm all station KO Stroke 150-15mm all station Cutter Holder Thickness 33mm Dimensions of FDC 45mm Reversible Blank ...more

, New in 2004 880 Ton Milacron Maxima MM-880-179:, Shot size: 179 Oz, Screw diameter: 110 mm, Tie bar spacing: 55.1" x 42.5" WP, Platen Size: 70.9" x 58.3", Max. Open daylight: 88.6", Min Mold Height 11.8", Max Mold Height 45.3", Clamp Stroke 76.8", Ejection Stroke 9.8", Control: Xtreme ST, Corepull, Sepro S900 ...more

Make: Toshiba Shibaura, Model: EC110SXIIIV70-U34, Year: 2023, Machine Location: Upon Request, Capacity: 110 Ton, Shot Size: 8.1 oz, Tie Bar Spacing: 18.1″ x 16.1″, Platen Size: 26″ x 24″, Max Daylight: 35.4″, Min /Max Mold Height: 7.71″/21.7″, Clamp Stroke: 13.8″ ...more

Cutoff Diameter 8.5mm Kickout Length 55mm Cutoff Length 55mm Pieces per Minute 200 PKO Stroke 18mm 2nd, 12mm 3rd Weight 12000 Lbs., Bushing Cutoff, PKO, Wiper, RKO, PD Sensor, Trim Capable, Capable Fingerless Transfer.

280 Ton JSW Electric Servo Drive Injection Mold Machine, Model J280ADS, Year: 2015, Shot size: 34 oz., Tie bar spacing: 24.80" x 24.80", Platen size: 36.81" x 36.81", Daylight: 48.03", Clamp stroke: 20.22", Mold thickness: 9.84" - 24.40", Electrics: 480/3/60 - 42 FLA.

Brand: -, Condition: USED, "AS-IS", Model: GEW 979-2, Type: -, Serial: 0Q080119, Power Rating: 2.5 KW MAX, 480 V, 3 PH, 3 A, 60 HZ COLD WATER: 200-600 KPA, STEAM: 200-600 KPA, Weight: APPROX. 1500 LBS, Category: LAB EQUIPMENT, Shipping Dimensions: 45" X 93" X 80", ERC #: MO-4576, Job #: 103, Additional Notes: KEY IS ...more

, MAX. WIRE DIAMETER (500 N/MM2). 19 MM, MAX. CUT-OFF LENGTH. 165 MM, MAX. DIE KNOCKOUT. 120 MM, PKO STROKE. 43.5 MM, PRODUCTION RATE. 160 PPM, S:, POSITIVE KNOCKOUT IN ALL FOUR PUNCHES, INDIVIDUAL FINGER OPENING TRANSFER, QUICK CHANGE S, 4 FORMING DIES, BUSHING CUT-OFF, TRIMMING CAPABLE IN 4TH STATION, DIE KNOCKOUTS ...more

One Used 3/4" J.G. Kayser Model MZH DSSD Cold Header, 20 mm (.787") Maximum Cutoff Diameter, 180 mm (7.087") Maximum Kickout Length, 42 mm (1.635") Maximum Upset Diameter, 40 PPM Maximum Output, many many spare parts and tooling, 12' wide x 16' long., Motor base is 10' wide x 5' long, Weight: 30,000 kg ...more

Maximum Cutoff Diameter 1/8" Shank Length 1 3/16" Pieces per Minute 400 Electrics 2 HP 220/440 Volts AC Motor and Controls Weight 3800 Lbs.

Maximum Cutoff Diameter 4mm Maximum Cutoff Length 65mm Maximum Kickout Length 50mm Pieces per Minute 330 Weight 8200 Lbs., Bushing Cutoff, PKO, PD Sensor, stripper or wiper mechanism.

Maximum Cutoff Diameter 1/4" Shank Length 1 3/8" Maximum Cutoff Length 2 3/8" Pieces per Minute 265 Electrics AC Motor and Controls Dimensions 8 x 4 1/2 Weight 9000 Lbs., Bushing Cutoff, PKO, Die relief.

NEW ENGINE AT 3,716 HOURSCat Certified Used, 12 month 1000 hour Powertrain and Hydraulic Warranty, 24 month 500 hour Parts CVA, 953K HRC TRACK LOADER, AIR INLET, STANDARD, ANTIFREEZE, -50C (-58F), BUMPER, STANDARD, CAB, DELUXE, Cat Certified Used, 12 month 1000 hour Powertrain and Hydraulic Warranty, 24 month 500 hour ...more

9/16" NATIONAL #89 TWO-DIE THREE PUNCH COLD HEADER, CUT-OFF DIAM. 14 MM., MAX. SHAFT LENGTH UNDER HEAD. 125 MM, MAX. LENGTH CUT-OFF 150 MM, MAX. P.P.M. 100, MOTOR HP 50, PUNCH KICK OUT IN SECOND AND THIRD PUNCH, PUNCH KICK-OUT, CLOSED BUSHING CUT-OFF, RELIEVING KICK OUT, TRIMMING IN LAST STATION.

Diameter1" Maximum (25.4mm) Production180 PPM Maximum Feed Length3" (76.2mm) Maximum Die Kickout3" (76.2mm) Approx. Weight28,100 lbs (12,746 kg) Approx. Floor Size77" x 134".

Cutoff Diameter 3/16" Shank Length 2 1/4" Cutoff Length 3" Pieces Per Minute 500 Electrics 15 HP 440 Volts AC Motor and Controls Weight 9000 Lbs. O.A. Dimensions 8' x 4', 2 Plane Wire Straightener.

2021 CAT 627K WHEEL TRCTR SCRPER, BRIDGESTONE 33.25R29, CAB PRECLEANER, COLD START ATTACHMENT, ENGINE,C13/C9.3,US EPA TIER 4F, FAST FILL GP, FILMS AR - U.S. (ANSI), LOAD ASSIST, ARR, NON-POWERED ACCESS GP, Online Owner's Manual, PRODUCT LINK, CELLULAR PLE641, PUSH PULL ARRANGEMENT, SEQUENCE ASSIST CPM, STANDARD ...more

Maximum Cutoff Diameter 1/4" Maximum Cutoff Length 2 3/8" Maximum Shank Length 1 3/8" Pieces per Minute 265 Electrics 10 HP AC Motor and Controls Weight 9000 Lbs. O.A. Dimensions 4' x 7', Bushing Cutoff, Split Punch Holders.

Cutoff Diameter @ 85,000 PSI 1/2" Cutoff Diameter @ 100,000 PSI 3/8" Die Kickout 3" Cutoff Length 4 1/2" Pieces Per Minute 200 Electrics 30 HP ACVD Motor and Controls Weight 32,500 O.A. Dimensions 15 1/2' x 6', IAC Enclosure, Bushing Cutoff, PKO, Wiper, RKO, ACVD, Machine is set up for Heat, 2 Plane PA ...more

LHI Super RoboChop Pneumatic Upcut Saw w/16' Infeed. Automatic custom Upcut Saw, cutting envelope of 4-1/2" x 16" up to 6" x 9"; cuts (2,000) 4" x 6" x 3-1/2" blocks/Hr: -- Up-cutting saw operation left-to-right or right-to-left (specify when ordering); saw structure tilted to assist in keeping boards on fence. -- ...more

Maximum Cutoff Diameter 3/8" Maximum Cutoff Length 9 1/2" Maximum Shank Length 8 1/4" Pieces Per Minute 80 Electrics AC Motor and Controls Weight 22,000 Lbs., 10 Roll Plane Pre-Straightener, Automatic Lubrication.

W.F. Wells 25″ x 40″ Full Hydraulic “Twin-Post” Band Saw, B-25-1, Inventory # 5831, Model: B-25-1, Made in USA, Capacity:, Round:, @ 90°: 25 1/2″, @ 45°: 24″, Rectangle:, @ 90°: 25″ x 40″, @ 45°: 25″ x 24″, Weight Capacity: 15,000 lbs., Blade ...more

Cutoff Diameter 7.0mm Mild Steel Diameter @ High Tensile Steel 6.0mm Cutoff Length 60.0mm Maximum Shank Length 50.0mm Maximum Transfer Length 60.0mm Pieces per Minute 50-200, Impax Unit.

Maximum Cutoff Diameter 2.5mm Maximum Cutoff Length 18mm Maximum Shank Length 12mm PKO Stroke 1st Punch 10mm PKO Stroke 2nd Punch 5mm Pieces per Minute 200/250 Weight 1300 Kgs.

Maximum Cutoff Diameter 1/4" Maximum Cutoff Length 5 5/16" Maximum Shank Length 4 1/8" Pieces per Minute Up to 100 Electrics AC Motor and Controls Weight 8400 Lbs. O.A. Dimensions 5' x 10', Wire Straightener, AC Variable Speed Drive.

Cutoff Diameter 7.0mm Mild Steel Diameter @ High Tensile Steel 6.0mm Cutoff Length 60.0mm Maximum Shank Length 50.0mm Maximum Transfer Length 60.0mm Pieces per Minute 50-200, Impax Unit.

Cutoff Diameter 9/16" Shank Length 5" Cutoff Length 6" Pieces per Minute 100 Motor and AC Controls 50 HP 280/440 Volts Weight 50,000 Lbs. O.A. Dimensions 18'x 7' x 7'H, Bushing Cutoff, PKO.

One Used 5/16" Waterbury Farrel Model #11 Single Stroke Open Die Hand Feed Re-Header, 5/16" Maximum Wire Diameter, 5 1/2" Open Die Cavity, Note this machine does not have a feed box. It was designed to hand feed special long parts and double end parts with upgraded electrics and motor/clutch drive to accommodate hand ...more

Maximum Cutoff Diameter (100,000 PSI) (.393") 10mm Maximum Kickout Length ( 3") 76.2mm Minimum Kickout Length (.590") 15mm Maximum Cutotff Length ( 3.149") 80mm Pieces Per Minute 200 Electrics AC Motor and Controls 200 Volts 3 Phase Weight 24,250 Lbs. O.A. Dimensions 5'7" x 13'2", Set Up Jig/ Extra Transfer ...more

Maximum Cutoff Diameter 6mm (high tensile steel) Maximum Cutoff Length 95mm Shank Length 75mm Minimum Shank Length 10mm Pieces per Minute 230 Electrics AC Motor and Controls Weight 10,000 Lbs., Bushing cutoff, Timed PKO 1st & 2nd, 2 Plane Straightener, Exit conveyor, Brankamp Process Monitor model ECO 600.

Maximum Cutoff Diameter7/64" (2.5mm) Maximum Cutoff Length3/4" (18mm) Maximum Shank Length1/2" (12mm) Maximum Production250 PPM Approx. Weight3,000 lbs, PKO, Bushing Cutoff.

Maximum Cutoff Diameter13mm Maximum Cutoff Length210mm KO Stoke180mm Maximum Production35 PPM ElectricsAC Motor & Controls Approx. Weight28,700 lbs Approx. Floor Size9"L x 13" W x 5" H, Check out our full inventory www.fhmachinery.com.

Make: Elumatec, Model: SBZ 628s, Year: 2021, Machine Location: Upon Request, Max. Bar Length: 7600mm, Working Direction: Right to Left or Left to Right (switchable), Max. Profile Cross-Section: 200 x 160 / 160 x 200 mm, Min. Profile Cross-Section (depending upon gripper position): 30 x 10 mm, Finished Part Length: ...more

HYDMECH NON-FERROUS COLD SAWMODEL: PNF350-2N, S/N: 017197, NEW: 2011 : CUTTING CAPACITY:-ROUND (TUBE)--AT 0 DEGREES. 4.72"--AT 45 DEGREES (RIGHT). 4.72"--AT 45 DEGREES (LEFT). 4.3"-SQUARE (TUBE)--AT 0 DEGREES. 4.13"--AT 45 DEGREES (RIGHT).″.93"--AT 45 DEGREES ...more

Brand/Model: Metal Table saw - : Used table saw, electric motor, 20in. Blade, piece cracked out of table top RPM.

AIR CONDITIONER, T4F, AUTO-UP STABILIZERS, BEACON, MAGNETIC MOUNT, BELT, SEAT, 3" SUSPENSION, BUCKET-GP, 1.4 YD3, PO, BUCKET-HD, 18", 4.2 FT3, CAB, DLX, COLD WEATHER PACKAGE, 120V, CTWT, 1015 LBS, CUTTING EDGE, TWO PIECE, DISPLAY, STD, ENG SN J3625332 MSO C3ZWM, ENG, 74.5KW, C3.6, T4F, FR BT S/N 191106337, GUARD ...more

3/8" ASAHI OKUMA MDL# AOT 10B 2 DIE 2 BLOW COLD HEADER, MAXIMUM CUTOFF DIAMETER (100,000 PSI) (.393") - 10MM, MAXIMUM KICKOUT LENGTH ( 3") - 76.2MM, MINIMUM KICKOUT LENGTH (.590") - 15MM, MAXIMUM CUTOTFF LENGTH ( 3.149") - 80MM, PIECES PER MINUTE - 200, ELECTRICS - AC MOTOR AND CONTROLS 200 VOLTS 3 PHASE, WEIGHT - ...more

Max Cutoff Diameter -10mm, Max Kickout Length - 70mm, PPM - 180, Weight - 15,000 lbs, Single Plane wire straightener, Brankamp Process Monitor Model ECO 600, Exit Conveyor.

;- Foley Work Ready - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, 2021 MODEL, CAB, DELUXE, CTWT, STANDARD, 763LBS, 2 PCS, DIFFERENTIAL,LIMITED SLIP REAR, Engine, ENVIRONMENT, STANDARD, FENDERS, STANDARD, HYDRAULICS, 3V, CPLR READY, SL, HYDRAULICS, STANDARD, SL, JUMPER LINES, NONE ...more

Make: SCM, Model: Gabbiani P75, Year: 2019, Machine Location: Upon Request, Blade Projection: 70mm, Cutting Lengths Available: 3,300mm, 3,800mm, and 4,300mm, Saw Carriage Speed: 6–60m/min, Approx. Pusher Feed Speed (for cross cutting): 60m/min, Main Blade Motor: 7.5kW, Scoring Blade Motor: 1.3–1.5kW for ...more

Throat Band to Column 35.5 inches Maximum Work Height 13 inches Band Width Capacity 1/16" - 1" Saw Band Length 175 inches Variable Band Speed 50-300 / 850-5200 FPM Table Tilt 45 R / 10 L Table Dimensions 26 x 26 Table Height 43 inches Wheels 3 - 16.125" Upper Wheel Adjustment 3 inches Approx. Shipping Dimensions 40 L ...more

SERIAL.: 497234, MODEL.: HBP310/403G, CAPACITY ROUND 90 DEG.: 12.2", CAPACITY RECTANGLE 90 DEG.: 15.7" X 12.2", CAPACITY ROUND 45 DEG RIGHT.: 10.6", CAPACITY RECTANGLE 45DEG LEFT.: 13.7" X 12.2", CAPACITY RECTANGLE 45DEG RIGHT.: 10.6" X 12.2", MITER RANGE MAX LEFT.: 30 DEG, MITER RANGLE MAX RIGHT.: 45 DEG, CUTTING ...more

AIR CLEANER, STANDARD, ASSIST W/ ARO, BEACON, LED FLASHING, BLADE, 145" ARO, LGP, CAB PACKAGE, STANDARD, COLD WEATHER, 120V, PACKAGE, CONFIGURATION 16B VPAT, COUNTERWEIGHT, REAR, Engine, FAN, DEMAND, Fire Extinguisher, FUEL ANTIFREEZE, -25C (-13F), GUARD, TRACK GUIDING CENTER HA, HYDRAULIC OIL, STANDARD, LANE 2 ORDER ...more