Buy or Sell Your Wide Belt Sander

Used 9" wide x 6' long Biflow slat conveyor, (2) 4.5" wide belts, stainless steel side rails, (2) 0.125 HP DC motors.

6″ belt width, 1″ belt divider height, 110 voltage, Entry height 12″ from floor to top of guarding.

109125.007, One (1) used Andritz twin wire belt dewatering press, Belt: 42" Wide, Steel Frame, CPF 1000, see attached PDF from Andritz, Manufacturer ANDRITZ Model CPF 1000 Condition Used Stock Number 903583 PF Belt 42" Wide.

ORDER 12, 12' LONG, 30" WIDE, SEW MOUTITRAC LTE B VARI DRIVE, ADJUSTABLE HEIGHT LEGS, 2019, RUBBER FLAT BELT, 150" X 40" X 60" T APROX, 1500 LBS APROX..

CAM-WOOD WS-NDA 1300 3-Head Planer Sander[ Planer, Drum and combi head]s: -- This machine is especially designed for removing heavy material such as glued-up panels, bent boards, and rough lumber. -- The first station is a knife planer head, followed by a combi head with drum and platen at the second station and a ...more

Pearson Case Sealer with Nordson hot glue melt, includes case conveyor and control panel, 3-phase, 460 volt, 60 Hz electrical requirements. Pearson serial number 93404017673, Nordson Model 2305. Includes 12" wide x 10' long belt conveyor. Last used in brewery operation., Previous Use: Brewery operation, Basis: FOB.

Stainless steel, pack off conveyor. Conveyor a 16" wide x 110" long Intralox belt, 31" to 37" infeed/discharge range and 23½" wide x 96" long pack table 6" above belt height..

SKU: 135150, Model: S3 443TM, Year: 2007, Condition: Used, S/N: 5105194, Electrical :, Voltage: 440 volts, Phase: 3-phase, # of Belts: 3, Type: Belt, Dimensions: 89.00 (H) x 88.00 (W) x 122.00 (L) inches, Additional :, Working Width: 1350 mm (53"), Belt Size:1380 mm x 2620 mm (54" x 103"), Material ...more

Combi America, Model Ergopack HS. Rated from 5 to 20 cases per minute – depending on materials, application and operator dexterity. Case size range: 8" to 24" in Length; 6" to 16" in Width; 5" to 18" in Height. 72" long blank case magazine, suction cup reciprocating pick and ...more

Basic Parameter: Structure Two sides sand belt and six edge rounding rollers Working Width 1,300mm (51.18") Configuration: Working Width Range 10mm-1300mm (0.4" - 51.18") Metal Piece Thickness 1.5mm-50mm (0.06"-1.97") Minimum Piece Size 50mm*50mm*1mm (1.97" * 1.97" * 0.04") Total Power 52.75 kw Sand Belt Speed ...more

KK&KK pressure-sensitive labeler featuring a 4.5" wide belt. Dimensions are 76" length x 35" height. Last used in a cosmetics manufacturing facility., Basis: FOB, Belt Width: 4.5".

Medium Duty, Flat Run, 2HP 3/60/230/460 Volt Electric Motor (Left Side Mount), 60FPM Belt Speed, 120" Center-To-Center Length, 2 Ply, Rough-Top Belting (Laced Connection), Bottom Guard Included.

CAPACITY:, Maximum Abrasive Belt Width: 37.4", Maximum Working Width: 36", Abrasive Belt Length: 75", Diameter of Barrell Brush: 11.81", Abrasive Belt Drive: 20 HP, Brush Head (1): 00 HP, Approximate Machine Dimensions: 126" L x 82" W x 91" H, Approximate Machine Weight: 10,720 Lbs, (1) Abrasive Sanding Heads, (7) ...more

Used 17"W X 13'-3"L Stainless Steel Trough Vinyl Belt Conveyor, Welded stainless steel portable frame, adjustable from horizontal to 32 incline @ 107" tall., 3" square tube frame support with polyethylene rollers and drip/dust pan., Belt is reinforced vinyl with 3/16" cleats @ 8" sp. ...more

Stainless steel belt conveyor consisting of 24" wide x 38" long stainless-steel frame with 19-1/2" wide flat green belt. Frame is mounted on stainless steel legs with adjustable footpads. Currently set at 24" height. Also includes some guide rails on each side of conveyor, adjustable width. Belt is driven by ...more

Stainless steel conveyor, belt, 2.75" x 7', stainless steel, accumulation table. TL Systems stainless steel belt conveyor, belt measures 2.75" wide x 7' long. Unit has stainless steel frame and belt. Complete with 115V variable speed drive, on/off controls and emergency shut off. Includes 12" diameter ...more

Seco, 89" wide x 276" long, stainless steel offline accumulation table. a 24" wide infeed conveyor and 89" wide x 276" long accumulation belt with a 49" infeed height. Powered by (2) ½ HP drives., OAD: 317"L x 120"W x 56"W.

Used New London Horizontal Conveyor, Vintage 8/11/2017 S/N: 120210, Model 200-30-120, Smooth 141" x 30" Belt Baldor.33 HP 230/460 Volt Motor Model Inverter Motor Chain Driven to Gearbox, Grove Gear 1 HP 20 Ratio Gearbox Model Ironman Approximate Dimensions: 143" L x 35" W.

51" WIDE BELT DEBURRER, (4) ROTARY BRUSHES, VSD'S, WDC-7 WET DUST COLLECTOR, 25 HP BLOWER, CONTROLS.

TIMESAVER - TB-440-4,.2-Head Wide Belt Sander40" Width cap.; Drum and Combination Head.Head Configuration:1st Head - 50 HP; 12" rubber covered contact head.2nd Head - 40 HP; combination platen head.: -- Sander completely rebuilt (15) years ago. -- Rubber covered abrasive rolls were recovered, grooved and balanced ...more

Nercon, stainless steel, inclined cleated conveyor. 16½" infeed height, 17" wide intralox conveyor belt with 2" high cleats set on 6½" centers. Conveyor has 44" long bottom horizontal run and 60" long incline with 54" discharge height. Powered by 1 Hp motor drive. ...more

Northtech NT-VES1230 Vertical Edge Sander 7.5HP Main Motor 3 Ditch V-belt Drive Oscillation System: Gear box with Cam Oscillation Travel: 1/4" Min/Max Working Length: 1" / 30" Min/Max Working Width: 1" / 12" Minimum Working Thickness: 1/8" Sand Paper Size: 12"x102" Sand Paper Speed: 2500FPM Platen Size: 30-1/2"x13" ...more

Stainless Steel Belt conveyor with stainless steel frame and plastic belt, 12" wide X 33' overall length. Includes (2) 16-1/2' long sections with drives. One section includes belting along the full length and the other section has some belting and the area with no belting is where boxes will be pushed down the ...more

CAM-WOOD A-3760X Combination Head Wide Belt Sander: -- 36" Width cap. - Combination Sanding head with rubber-covered contact roll and adjustable finishing platen. 20 HP main drive motor. -- 37" X 60" Abrasive belts, pneumatic abrasive belt tensioning. -- 0" - 5" Feed through bed adjustment, Digital thickness set-up ...more

Stock #: 181260004, Location: Beaver Falls, PA, Brand: Brusa & Garboli, Model: Lt130 Wet, Year: 2022, Approx. Shipping Weight: 1676 Lbs., Approx. Shipping Dimensions: Length 53", Width 60", Height 61", Loading Fee: Rigging Required, Processing Method: Wet Grinding, Workpiece Shapes: Round, Oval ...more

Stock #: 114250409, Location: Decatur, GA, Brand: Dorner, Model: 3200 Series, Year: 2014, Approx. Shipping Weight: 300 LBS., Approx. Shipping Dimensions: 10' L x 1' W x 3' H, Skidding Fee: Skidding Unavailable, Belt Width: 10", Conveyor Length: 10', Electrical: 460V / 3PH, Adjustable side rails ...more

Make: Roberts, Model: IMFS1500, Year: 2016, Machine Location: Upon Request, Used Roberts IMFS1500 Pre-Made Pouch Filling System with 14 Head Scale:, – Packet Size Range: 6.25″-7″ W X 9.75″-11.5″ H with 3″ Gusset, – Speeds: Up to 100 p/min, – Air Requirements: 65 CFM @ ...more

Used Thermo Goring-Kerr DSP2 inline metal detection system, with approximately 10" wide plastic belt, with pneumatic reject, 3 phase voltage.

BMI, Model 5030, 39¼" wide x 145" long, stainless steel belt conveyor. a 39¼" wide x 145" long blue food grade belt, 1 Hp drive and mounted on (6) legs with locking casters and an infeed / discharge range of 32" to 40"., OAD: 145"L x 60"W x 39"H.

Inventory No. 0326-017-0001 Manufacturer Boarke Machine Co Model No. BKM-52103NRK Name Belt Sander Arrival Date 05-01-2026 Dimensions L x W x H (inches) 237 x 92 x 99 Capacity 85” X 50” Electrical 3/60/230 Weight (lb.) 12250 Category Finishing Condition Used Available Quantity 1 Serial No. FC14097 Item 7.5 ...more

Northtech NT-KL-43C-A Wide Belt Sander, 43” Capacity, Single Combo Head, 230 Volt 3-Phase, spare parts as pictured.

A-One Workhorse Line Conveyor System. Model: A-33-14. S/N: 22093-2. Belt width : 2 ft. 10 in. Maximum aperture/clearance above belt: 1 ft. 5 in. H x 2 ft. 10 in. W. (7) Rollers dimension: 2 ft. 10 in. L. Baldor Industial Electric Motor, Hp: 1, RPM: 1740, 230 - 460 V, AMPS: 2.8 - 1.4, Hz: 60, 3 phase. Falk Enclosed ...more

Serial No. 20524, 1st Head.Abrasive Sanding Belt, 2nd Head.Counter Rotating, Oscillating Abrasive Brush, Overall Width of Opening.37", Sanding Width - Maximum.36", Belt Size.37" x 60", Part Length - Minimum.7-5/8", Part Thickness:, - Adjustment Range.0 - 8", - Increment.0.001", Conveyor Speed - Variable.15 - 45 FPM ...more

Belt Width 8" Discharge HT 63" Electrics AC Motor and Controls.

5.5 " WIDE X 93" LONG RUBBER BELT WITH RAISED CLEATS ON 4" CENTERS. FULL SUPPORT UNDER BELT. FLAT PART OF 5.5BELT IS APPROX 62" LONG WITH INCLINED SECTION APPROX 26" LONG. ALL ALUMINUM CONSTRUCTION. SMALL D.C. DRIVE MOTOR. REMOVABLE LEXAN DIVIDER ON TOP OF FLAT BELT. OVERALL DIMENSIONS: 96" X 12" X 21" TALL. ITEM #1806.

LARICK - 2-Head Brush Sander (2017)Machine s: (2) 15" Counterrotating & rotation reversible heads; enclosed in a Dust Collection Shroud. -- Feed belt & sanding head speeds: Variable by means of VFD. -- Machine currently setup with a steel brush & brass insert head. -- Can be used for minor destressing ...more

BELT AREA. 16" X 115", WEIGHT. 225 LBS., O.A. DIM. 33" X 124" X 35:, MOUNTED START/STOP CONTROLS, SPEED CONTROLS, 3/4 HP 1750 RPM 90VOLTS 7.6 AMPS MOTOR.

Transfer Conveyor. Stainless steel. Conveyor is designed to provide multiple feeding positions. Height is adjusted by crank. Belt width: 15 in. W. Belt type (top): leather. Belt type (bottom): KVP Ram Industries-821 (Acetal grey). Height at conveyor inlet (adjustable): 50 in. Height at conveyor outlet: 32 in. Top ...more

New England Machinery, model NECV-5V, vacuum belt, 1 to 2 lane diverter. 36" infeed / discharge height with a range of ± 2", 4½" wide x 107" long vacuum belt, 10" wide x 54" long vacuum belt, both belts powered by ½ hp drive, vacuum powered by 7½ hp blower ...more

Used 60" L x 24" Wide Flatbelt Conveyor 11" High Side Walls Unit Has 80:1 Rotomotive Right Angle Gearbox DOES NOT HAVE MOTOR Approximate Dimensions: 72" L x 48" W x 24" H.

Used 6" RDN puller, model 130.64, approximatley 6" wide x 29" contact length, smooth belt, 230 volt, serial# 0185-20268.

Used Mettler Toledo Hi-speed Checkweigher & Safeline Metal Detector Conveyor, Conveyorized Checkweigher/Metal Detector with left to right operation, Checkweigher: Hi-Speed model MM with touch controller, Metal Detector: Safeline Series with V2 controller; Aperture Size 9.75"W X 5.87"H X 11.25"L; ...more

RMT has partnered with Jonsen to offer you an outstanding selection of finishing machines for your needs., SG1950-4WJS is a reciprocating type working table: Work piece is clamped down and fixed on the working table. The whole working table moves back and forth repeatedly so the work piece can be processed by the work ...more

Used 18' L x 24" Wide Flatbelt Conveyor 11" High Side Walls 12" Pully Diameter DOES NOT HAVE GEARBOX OR DRIVE, PREVIOSULY DRIVEN BY HYDRAULIC MOTOR Approximate Dimensions: 20' L x 4' W x 2' H.

Stainless Steel Incline Belt Conveyor with Intralox modular plastic food grade belt, 48" wide X 102" long, infeed height 32" leading to 52'" discharge height. Includes side rails driven by 1/2 HP, 230/460 V, 3-phase, 60 Hz, 1720 RPM motor. Gearbox ratio 87 final output 20 PRM. Mounted on stainless steel frame with ...more

Stein, Model APB, stainless steel overflow batter applicator. For use with conventional pumpable batters. Products per minute – dependant on materials and application. a 35" wide x 63" long stainless steel wire belt, 35" wide batter double curtain to coat top and sides of product, lowered belt ...more

Belt feeder, measures 24" wide X 18' long, frame is constructed of carbon steel and includes heavy duty rubber belt, riding on idlers. Belt is driven by 3 HP, 1775 RPM, 208-230/460 V motor thru V-belt drive assembly. Belt is 18" off ground. Previously used to convey compost discharged from ribbon mixer (Item# ...more

37"1 (Belt)8"6"20 HP15-45 FPM6'x6'x7.5'H3,000 lbs..

Stainless steel inclined cleated belt feeder. a 21" long x 21" wide x 12" deep product hopper, 3½" wide x 108" long belt with 1" high cleats set on 4" centers and discharge chute with 82" ground clearance., OAD: 98"L x 23"W x 100"H.