Buy or Sell Your Wide Belt Sander
Recommended Categories for wide belt sander
AI-ranked results for wide belt sander - closest matches first
Loma #IQ4/CW3-1500, combination metal detector & checkweigher rated from 10 to 140 feet per minute, touch pad controller with LCD display and statis light bar
Frain Industries | Carol Stream, IL
Category: Packaging Checkweighers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Loma
Model: IQ4/CW3-1500
Loma, Models IQ4 / CW3-1500, Combination metal detector and checkweigher. Rated from 10 to 140 feet per minute with number of product – depending on materials, application and machine configuration. Brushed 304 stainless steel construction. IQ4 Metal detector has working aperture of 6½" in Height x ...more
18" wide, BMI / Benda Mfg, Stainless Steel inclined conveyor, 36" discharge, mounted on 4 leg Stainless Steel base frame
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Bmi / Benda Mfg
BMI, stainless steel inclined conveyor. a 13" infeed height, 18" wide conveyor belt. Conveyor has a 67" long incline with a 72" long top horizontal run and a 36" discharge height. Powered by a ½ hp motor drive with variable speed and mounted on a (4) leg stainless steel base frame. ...more
Ruberg #CM-150, Stainless Steel, 150 liter, 15" dia.x 55" L mixing chamber, belt driven, no motor, #49583 (2 available)
Federal Equipment Company | Cleveland, OH
Category: Continuous Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Ruberg
Model: CM-150
Used Ruberg mixer, typ CM-150, stainless steel construction, 150 liter capacity, approximately 15" diameter x 55" long mixing chamber, belt driven, no motor.
SureKap #SK6000-BF6-70, automatic, inline, Stainless Steel, 3 station, 6 spindle roll over conveyor capper & capacity feeder
Frain Industries | Carol Stream, IL
Category: Neck Banders and Cappers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Surekap
Model: SK6000-BF6-70
SureKap Model SK6000 BF6-70, automatic, inline, stainless steel, 3 station, 6 spindle roll over conveyor capper and cap feeder with number of containers per minute – depending on materials and application Cap size range: 22mm to 70mm. 120" long x 4-1/2" wide stainless steel container conveyor, 21" ...more
Amada #CS360HDDM, wet belt metal deburring machine, 36" wheel, automatic lube, #16817
Yoder Machinery Sales | Holland, OH
Category: Deburring Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Amada
Model: CS360HDDM
Year: 1994
SERIAL. #MA5183, MODEL. #CS360HDDM, DIAMETER OF WHEEL. 36" WIDE, WATER CIRCULATION SYSTEM. YES, VARIABLE SPEED CONVEYOR BELT. YES, AUTOMATIC LUBRICATION. YES, DUST COLLECTOR. YES.
Oscillarin spindle sander, State #B-4, 20" x24" table, up/down tilt, 1/2 HP, extra spindles
Yoder Machinery Sales | Holland, OH
Category: Miscellaneous Sanders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: State
Model: OSCILLARIN SPINDLE SANDER
SERIAL. 4634, MODEL. B-4, AREA OF TABLE. 20" X 24", TABLE TILTS UP & DOWN. 15 UP & 45 DOWN, TABLE HEIGHT FROM FLOOR. 401", SPINDLE SPEED. 1725 RPM, VERTICAL OSCILLATION. 90 SPM, PHASE. 1, VOLTAGE. 110, EXTRA SPINDLES. YES, MOTOR HORSEPOWER. 1/2.
12" wide x 11.9' long, Span Tech, Stainless steel, flexlink inclined conveyor, adjustable guide rail, 3/4 HP drive
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Span Tech
Span tech, stainless steel, 12" wide x 141" long flexlink inclined conveyor. 31" long horizontal run leads into 110" incline section. Infeed height range: 30½" to 35½". Discharge height range: 60" to 65". adjustable guide rail, powered by ¾ hp drive., OAD: ...more
Fenn #3P, plain type high speed turkshead, 1/2" x 1-1/8" roll opening, 2-1/2" roll size
FH Machinery Inc | Ivyland, PA
Category: Wire Turksheads
Seller: FH Machinery Inc
Location: Ivyland, PA
Mfr: Fenn
Model: 3P
Maximum Roll Opening1/2" x 1-1/8" (12.7mm x 28.6mm) Vertical Roll Size2-1/2" (63.5mm) Dia x 1-1/8" (28.6mm)Wide Horizontal Roll Size2-1/2" (63.5mm) Dia x 9/16" (14.3mm) Wide Approximate Max. Square.080" (2.03mm) Approx. Weight160 lbs (72.7 Kg), Fenn does not list a capacity for their "P" type Turksheads because they ...more
Cat 910, Wheel Loader, 269 hours, S/N: JW201970, 2023
Wheeler Machinery | Salt Lake City, UT
Category: Wheel Loaders
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Caterpillar
Model: 910
Year: 2023
ALARM, BACK-UP, ARCTIC WEATHER PACKAGE, 120V, CAB, DELUXE, SINGLE BRAKE, CAMERA, REAR VIEW, COUPLER, IT, STD LIFT, CTWT STANDARD, 1510 LBS, Engine, FAN, DEMAND, FENDERS, STANDARD, HEATER AND AIR CONDITIONER, HYDRAULIC OIL, STANDARD, HYDRAULICS, 2V, STD LIFT, INSTRUCTIONS, ANSI, KICKOUT, RTD, NONE, LANE 2 ORDER ...more
4-1/2" wide x 4.8' long, BMI / Benda table top conveyor, vari-speed controller
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Bmi
BMI stainless steel frame belt conveyor. variable speed controler, 4½" wide x 56" long stainless steel table top product conveyor belt, adjustable guide rails and has 31" to 37" in feed and discharge height range. Mounted on (4) leg stainless steel leg frame with leveling pads., OAD: ...more
Cat 259D3, Skid Steer Loader, 908 hours, S/N: CW925836, 2023
Fabick Cat | Fenton, MO
Category: Skid Steers
Seller: Fabick Cat
Location: Fenton, MO
Mfr: Caterpillar
Model: 259D3
Year: 2023
**ATTACHMENTS PICTURED ARE, *CONTROL, ISO, PROP, WT, *DISPLAY, ADVANCED, LCD, CAMERA, *FAN, COOLING, DEMAND, *FILM, TWO SPEED WITH HIGH FLOW, *HYDRAULICS, PERFORMANCE, (H3), *LIGHTS, LED, *QUICK COUPLER, HYDRAULIC, *ROPS, ENCLOSED WITH A/C (C3), *SEAT,AIR SUSPENSION,CLOTH,HEAT, *STANDARD RADIO(12V),BLUETOOTH ...more
25" wide x 22' long, Bunting, Incline Conveyor w/Metal Separator, 80" x 72" Feed Opening, 24" H Sidewalls, 3" Cleats, 3 HP, 230/460 V
Arlington Machinery | Lake Zurich, IL
Category: Belt Conveyors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Bunting Magnetic
Used 22' Long x 25" Wide Bunting Incline Conveyor with Metal Separator 3" Cleats, 24" High Sidewalls 80" x 72" Fabricated Feed opening 3hp Motor: 230/460 Volt - 9/4.5 Amps Nord Gearbox 46:1 Gearbox Ratio (1705 Motor rpm) Bunting/Mesutronic Quicktron 5.2-E-300 Metal Separator S/N- 2012-1442-QN.
.44" wide x 16' long, Dabrico Inc. #CNV-020, Exit Conveyor, Stainless Steel, syringe inspection system, 0.44" inlet/outlet, 115 V., 2004
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Dabrico
Year: 2004
Dabrico Inc syringe inspection system, exit conveyor. Set up as gripper belt, size 0.4375" wide x 16' long. Unit is Model CNV-020, manufactured in 2004, stainless steel frame and aluminum with (4) 0.4375" inlet & outlet and 0.4375" opening on turn dial/stars, 115 Volt, Serial number 200411-7 complete with ...more
53" 6-5/8" EMC #Giant-1350-3WRF, 3-Hd. Top Abrasive Planer, 128" x 54" belt, 7-1/6" knife diameter, 40 HP, 9-13/16" roll diameter, 30 HP, 35.4" pass line, 65.6 FPM, 2025, new
Ex-Factory | Charlotte, NC
Category: Woodworking Planers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Emc
Model: GIANT-1350-3WRF
Year: 2026
EMC GIANT 1350 3WRF Abrasive Planer with (3) Heads, Planer Head, Roller and Superfinishing PadTop of the line Heavy Duty Abrasive Planer from EMC. The series of GIANT machines are available in many configurations. Abrasive Planer has a helicoidal head with insert tooling.Useful working width 1,350 mm (53"). Working ...more
30000 lb. Bradbury, coil upender/tipper
Met-Pro Machinery Inc | Detroit, MI
Category: Upenders and Downenders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Bradbury
MFG: BRADBURY, S/N: 17248, Capacity 30,000LBS., Flat Deck: 65" Wide x 67" Deep, "V" Deck: 65" wide x 50" Deep, Hydraulic Actuated., Lincoln: 15HP AC Motor, 230/460V. 1750RPM, 3ph, 60hz, 40/20 amp.
JUST ADDED!
Setco #108, Lathe Tool Post Belt Sander, 3 HP, 3600 RPM
Aucto | San Francisco, CA
Category: Tool Post Grinder
Seller: Aucto
Location: Louisville, KY
Mfr: Setco
Model: 108
THE SETCO MODEL #108 LATHE TOOL POST BELT SANDER IS A 3 HORSEPOWER MOTOR CAPABLE OF REACHING A MAXIMUM SPEED OF 3600 RPM. THIS SANDER IS DESIGNED TO OPERATE ON EITHER 460 VOLTS OR 230 VOLTS AT A FREQUENCY OF 60 HZ, PROVIDING FLEXIBILITY IN POWER SUPPLY OPTIONS. THE UNIT IS SPECIFICALLY ENGINEERED FOR PRECISION TASKS ...more
50000 cfm Donaldson Torit #484RFW8, Baghouse Dust Collector
AM Industrial | Brook Park, OH
Category: Dust Collectors
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Donaldson
Model: 484 RFW 8
50,000 cfm Donaldson Torit 484 RFW 8 Baghouse Dust Collector, Donaldson Torit 50,000 cfm round baghouse-type dust collection system Model: 484 RFW 8 Holds (484) 8′ long filter bags Automatic Reverse Air Cleaning System with Rotating Manifold and Cleaning Blower (No Compressed air required) Walk-In Clean Air ...more
No. 433 Torrington, 2-1/4" 2-die rotary swager, 5/8" solid capacity, #14125
Machinery International Corp | Woodridge, CT
Category: Swaging Machines (Swagers)
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Torrington
Model: 433
2-1/4" (57mm) TORRINGTON MODEL 433 2 DIE ROTARY SWAGER, STOCK # 14125, Manufacturer: Torrington Manufacturing, Model No.: 433, Type: Rotary Swager, Number of Dies: 2, Capacity tubing: 2 1/4" (57.15mm), Capacity solids: 5/8" (15.875mm), Longest possible taper in one operation: 2 7/8" (73.025mm), Die size: 2.687" W ...more
Douglas #AXIOM-WA-IM, Case Packer Wrap Around, 5-45 cases trays/min, AB PLC Control
Frain Industries | Carol Stream, IL
Category: Case Packer Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Douglas
Model: AXIOM-WA-IM
Douglas, Model AXIOM-WA-IM, automatic, servo driven, intermittent motion, wrap around case packer. Rated from 5 to 45 cases or trays per minute – depending on materials, application and machine configuration. Case size range: per application. Product size range: per application. 11¾" wide x 118" ...more
10" wide, Stainless Steel inclined cleated belt conveyor, 50" loading height, 83" discharge height
JM Industrial LLC | Millwood, WV
Category: Belt Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 10"W Inclined Cleated Belt Conveyor - Stainless Steel, Sanitary construction with hinged, over-belt cover on a fixed 60 incline, Frame constructed with 14Ga stainless sheet, White vinyl belt with 2 1/2" vulcanized T-cleats on 12" spaces (approx. 8'-6" between pulley centers), 10 Cu/Ft capacity ...more
LNS #Quick-Load-Servo-QL-MOVE-S2, Bar Feed, serial #211252-2012, 2012
Machinery Solutions Inc | Lexington, SC
Category: Bar Feeders and Loaders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lns
Model: QUICK-LOAD-SERVO-QL-MOVE-S2
Year: 2012
Diameter: 1/4" - 3.150" (6-80 mm) Bar length: 14" - 63" (350 - 1600 mm) - Not to exceed headstock spindle length Chain loading rack magazine holds 16 pieces Maximum bar weight: 150 lbs. Maximum table load: 1,100 lbs. Pushing force: 125 ft-lb Loading system: Side load rack Loading capacity: 26" (650 mm) Loading: ...more
Cat TL1055, Telehandler, 4534 hours, S/N: T7801444, 2023
Western States Equipment | Boise, ID
Category: Telehandlers
Seller: Western States Equipment
Location: Meridian, ID
Mfr: Caterpillar
Model: TL1055
Year: 2023
ALARM, BACK-UP, STANDARD, BELT, SEAT, 3", CAB, ENCLOSED, HRC, CARRIAGE, SIDE TILT, 72", CLIMATE PK, STD, SGL BATTERY, COUPLER, MANUAL, IT, FENDERS, SET OF FOUR, FORK, PALLET 2.36" X 5" X 48", HEATER + AIR CONDITIONER, HRC, INSTRUCTIONS, ANSI, LANE 3 ORDER, LEVER, MANUAL, FNR/WIPERS/IND, LOAD CHART, ANSI, TL1055 ...more
7 cu.ft. Wheelabrator #TMR-7, tumblast machine, rubber belt, 25 HP EZ Fit wheel, PLC Control
World Equipment & Machine Sales | Stow, OH
Category: Tumble Blast Cleaning and Shot Peening
Seller: World Equipment & Machine Sales
Location: Michigan, MI
Mfr: Wheelabrator
Model: TMR-7
Year: 2012
Wheelabrator Model TMR-7, S/N 600238, 7 Cu. Ft, Rubber Belt, 25 HP EzFit Wheel, PLC Control Panel, Includes New Spare Belt, JUST SERVICED.
12000 lb. Custom, c-hook, 24" Wide Coils, 64" outside dimension, 24" vertical throat, parking stand
D & H Machinery Inc | Toledo, OH
Category: C-hooks
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Custom
C-Hook, -12,000 Lbs. x 24" Wide Capacity, -64" O.D. Capacity, -24" Vertical Throat Clearance, -25" Arm Length, -With Parking Stand, -In Storage: Toledo, OH.
4-1/2" wide, General Conveyor Co., Stainless Steel Table Top Conveyor, 1 HP, (2) 6" sprockets w/ 1" gap, 35" infeed/outfeed
Genemco | Hearne, TX
Category: Table Top Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: General Conveyor Co.
Conveyor Co. Stainless Steel Table Top Conveyor. S/N: 940640. (2) 6 in. sprockets with 1 in. gap between gear teeth. Maximum conveyor belt width: 4-1/2 in. SEW Motor and drive:1 hp, 450-2230 rpm, 230/460V, 3.9/1.95 amps. 60 Hz, 3 phase. Infeed/outfeed height: 35 in. Overall Dimensions: 36 in. L x 21 in. W x 42 in. H.
42000 cfm Gencor #BH42-1000 Pulse-Jet Baghouse Dust Collector 10770 sq.ft.
AM Industrial | Brook Park, OH
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Gencor
Model: BH42-1000
Product, Stock Number AM21962 Brand Gencor Filter Media Area (square feet of media) 10,770 Capacity 42,000.00 cfm, 42,000 cfm Gencor BH-42-1000-NA Baghouse Dust Collector, Gencor 42,000 cfm Pulse Jet Baghouse-type Dust Collection SystemMode: HB-42-1000-NAHolds (490) 14 ft bag filtersAutomatic Pulse Clean SystemClean ...more
CST/AutoWeigh #203-24", Checkweigher w/Belt Conveyor, 20" width infeed hopper, 68" L x 24" width belt, 1/2 HP motor
Genemco | Hearne, TX
Category: Packaging Checkweighers
Seller: Genemco
Location: Hearne, TX
Mfr: Cst/autoweigh
Model: 203-24
CST/AutoWeigh Checkweigher with Belt Conveyor. Model: 203-24. S/N: 93/3155. Infeed hopper: 20 in. W. Belt dimensions: 68 in. L x 24 in. W. Baldor Industrial Motor, 1/2 hp, 1725 rpm, 208-230/460 V, 1.8-1.6/0.8 amps, 60 Hz, 3 phase. Winsmith D-90, Type S-E, high-efficiency, worm gear speed reducer. Overall dimensions: ...more
Resina #UN30, automatic, inline, Stainless Steel, 3-station, 6 spindle capper, 30-150 cpm, 10-70mm capacity
Frain Industries | Carol Stream, IL
Category: Neck Banders and Cappers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Resina
Model: UN30
Resina Model UN30, automatic, inline, stainless steel, 3-station, 6 spindle capper rated from 30 to 150 caps per minute – depending on materials and application. Cap size range:10 mm to 70 mm with proper change parts. 120" long x 4-1/2" wide container conveyor with bump wheel in feed container ...more
Pyromaitre #Pryo-10, conveyor oven, 10" belt, 900°F, 15 KW, 20 amp, 480 VAC
Victory Machinery Exchange | Lake Forest, IL
Category: Conveyorized Ovens
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Pyromaitre
Model: PRYO-10
Catalog :, 10” BeltCalibration 7/2020900°15KW, 20A, 480VAC24” x 100”, Location: Lake Forest.
Cat 259D3 C3H2, Skid Steer Loader, 832 hours, S/N: CW907123, 2020
Fabick Cat | Fenton, MO
Category: Skid Steers
Seller: Fabick Cat
Location: Salem, IL
Mfr: Caterpillar
Model: 259D3 C3H2
Year: 2020
**ATTACHMENTS PICTURED ARE, *CONTROL, ISO, PROP, WT, *DISPLAY, ADVANCED, LCD, CAMERA, *FAN, COOLING, DEMAND, *FILM, TWO SPEED, *HYDRAULICS, PERFORMANCE, (H2), *LIGHTS, LED, *QUICK COUPLER, HYDRAULIC, *RADIO, AM/FM, BLUETOOTH, *ROPS, ENCLOSED WITH A/C (C3), *SEAT,AIR SUSPENSION,CLOTH,HEAT, BATTERY,HD,DISCONNECT, 850 ...more
SureKap #SK6000-RF6, automatic, inline, Stainless Steel, 3-station, 6-spindle roll over conveyor quill capper, #R30950
Frain Industries | Carol Stream, IL
Category: Neck Banders and Cappers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Surekap
Model: SK6000-RF6
SureKap Model SK6000 BF6-70, automatic, inline, stainless steel, 3 station, 6 spindle roll capper., Cap size range: 22mm to 70mm. 120" long x 4-1/2" wide conveyor, 4 ft³ cap hopper, 46" long x 5½" wide cap feeding / sorting belt, adjustable cap chute, with 24" long x 1" wide ...more
Magnapower Super Fines Eddy Current separators, eccentric high frequency & inductive force rotor,new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Eccentric High Frequency & Inductive Force Rotor, 24" - 80" Rotor/Belt Widths, Common Sizes:, 24" (600mm) Rotor / Belt Width, 48" (1200mm) Rotor / Belt Width, 60" (1500mm) Rotor / Belt Width, 80" (2000mm) Rotor / Belt Width, s:, High inductive force & high frequency for 85mm (3.5") to 1mm (.03") resolution on ...more
Scrap Winder, .250" x .060" Ca[., 18" width x 24" diameter, AC Powered
D & H Machinery Inc | Toledo, OH
Category: Scrap Winders for Coil Handling
Seller: D & H Machinery Inc
Location: Toledo, OH
Scrap Winder, -0.250" Wide x 0.060" Thick Capacity (approx.), -18" Wide x 24" Dia. Scrap Ball Capacity, -16" I.D., -Manual Scrap Extraction, -AC Motor Powered, -Air Cylinder Level Wind, -Overall Size: 54" L x 32" W x 33" High, 600 lbs., -In Storage: Toledo, OH.
Cat 259D3 C3H2, 2473 hours, S/N: CW919245, 2022
Fabick Cat | Fenton, MO
Category: Skid Steers
Seller: Fabick Cat
Location: Madison, WI
Mfr: Caterpillar
Model: 259D3 C3H2
Year: 2022
**ATTACHMENTS PICTURED ARE, *CONTROL, ISO, PROP, WT, *DISPLAY, ADVANCED, LCD, CAMERA, *FAN, COOLING, DEMAND, *FILM, TWO SPEED, *HYDRAULICS, PERFORMANCE, (H2), *LIGHTS, LED, *QUICK COUPLER, HYDRAULIC, *ROPS, ENCLOSED WITH A/C (C3), *SEAT,AIR SUSPENSION,CLOTH,HEAT, *STANDARD RADIO(12V),BLUETOOTH, BATTERY,HD,DISCONNECT ...more
Lissmac #SMD-123-RE, deburring & edge rounding machine, 37.4" width, 38.2" x 74.8" belt, LNS Hydroexpress 320 Barfeeder, 2021
Machinery Resources Intl | Simi Valley, CA
Category: Deburring Machines
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Lissmac
Model: SMD-123-RE
Year: 2021
LISSMAC SMD 123 DEBURRING AND EDGE ROUNDING MACHINE, NEW: 2021, MAX. WORKING WIDTH: 37.40, SANDING BELT WIDTH: 38.20", SANDING BELT LENGTH: 74.8", NUMBER OF HEADS: 2 (1 SANDING AND 1 BRUSHING), MAX. MATERIAL THICKNESS: 0.04 - 1.97, VARIABLE FEED RATE: 0.5 15.72 IPM, ADJUSTMENT OF MATERIAL THICKNESS: ELECTRIC ...more
Cat 420 XE, Backhoe Loader, 1053 hours, S/N: H9X02644, 2023
Wyoming Machinery - Cat | Gillette, WY
Category: Backhoe Loaders
Seller: Wyoming Machinery - Cat
Location: Gillette, WY
Mfr: Caterpillar
Model: 420 XE
Year: 2023
420 LANE 2 ZCON, BELT, SEAT, 2" SUSPENSION, BUCKET-GP, 1.31 YD3, IT, BUCKET-HD, 24", 6.2 FT3, CARRIAGE, PAL CL3, 61", IT, COUPLING, QD, THREADED CAPS, CUTTING EDGE, TWO PIECE,WIDE, ENG, 82KW, C3.6, T4F, FORK TINE, 2" X 5" X 54", INSTRUCTIONS, ANSI, LANE 2 ORDER, Online Owner's Manual, PACK, DOMESTIC TRUCK, RUST ...more
Adco #15DZ-60WD, semi-automatic, Stainless Steel, horizontal, continuous motion, hot melt glue cartoner, 20-50 cartons/min.
Frain Industries | Carol Stream, IL
Category: Carton Packaging Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Adco
Model: 15DZ-60WD
Adco, Model 15DZ-60-WD, semi automatic, stainless steel, horizontal, continuous motion, hot melt glue cartoner. Carton size range: 1" to 9" in Length; 1" to 4" in Width; 4 to 12" in Depth. (4) chains adjustable set on 12" centers, with 2" wide x 4" high lugs, 42" powered ...more
Mikro Pulverizer #SCB, Stainless Steel hammermill, with 16" wide x 16" long x 12" deep feed hopper, (2) 3" diameter feed augers, (12) sets of 6" wide swinging blunt impact hammers
Frain Industries | Carol Stream, IL
Category: Pulverizers and Hammermills
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Mikro
Model: SCB
Mikron, Mikro Pulverizer, Model SCB, Stainless steel hammer mill with amount of product per hour – depending on materials and application. 16" wide x 16" long x 12" deep product feed hopper, (2) 3" OD feed augers and (12) sets of 6" wide swinging blunt impact hammers powered by 10 Hp ...more
Lsi #1500, Label Machine, 95" x 4.5" capacity, 4.5" Link Belt, 10 Amps, 120 V
HGR24 | Euclid, OH
Category: Labeling Machines
Seller: HGR24
Location: Euclid, OH
Mfr: Lsi
Model: 1500
Inventory No. 0326-113-0001 Manufacturer Labeling Systems Inc. Model No. 1500 Name Label Machine Arrival Date 04-09-2026 Dimensions L x W x H (inches) 122 x 53 x 48 Capacity 95" X 4.5" Electrical 1/60/120 Weight (lb.) 645 Category Packaging Condition Used Available Quantity 1 Serial No. 140559 Item 10 A, Contains ...more
Portable 8' x 11' recycle bin, Gencor, adjustable heavy duty grizzley, adjustable feed gate
Aggregate Systems Inc | Murfreesboro, TN
Category: Recycling Equipment
Seller: Aggregate Systems Inc
Location: Murfreesboro, TN
Mfr: Gencor
Portable Gencor 8' x 11' Rap Bin Inventory #: RB2680 Portable Gencor 8’ x 11’ recycle bin with adjustable heavy duty grizzly S/N- 1BRCF-53497-97-1A Adjustable feed gate 40’ wide inclined belt extends ~ 22’ - belt appears in good condition Siemens 7.5 hp motor thru Rexnord gearbox Bin interior ...more
Rand-Bright #RB80D, dry polisher, electronic vari-speed feed drum, L to R, emergency stop, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: Polishers (Including Buffing Jacks)
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Rand-Bright
Model: RB80D
Year: 2022
RANDBRIGHT RB80D DRY Polisher, Technical Data and, Part Diameter, – Maximum 8 inches (203 mm), Minimum Part Length, – Multiple head machines, – without intermediate roller(s) 12 inches (305 mm), – with intermediate roller(s) 8 inches (203 mm), Feed Drum, – Diameter 11.25 inches (285 mm) ...more
Manco, pointer with hydraulic unit
National Machinery Exchange | Newark, NJ
Category: Pointers (Including Forging Pointers)
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Manco
MANUFACTURER. MANCO, O.A. DIMENSIONS. 3' Long X 2'2" Wide X 4'10" High APPROX, WEIGHT. 800 Lbs APPROX, Hydraulic unit and this unit is 3' Long X 2'2" Wide X 2'6" High and weighs 280.
Ferrell Ross #18x12-Flakemaster, flaking mill, rated up to 150 lbs per hour, air over hydraulic pump, pneumatic scrapers
Frain Industries | Carol Stream, IL
Category: Roller and Flaking Mills
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ferrell Ross
Model: 18X12-FLAKEMASTER
Ferrell Ross, Model 18 x 12 Flakemaster, flaking mill. Rated up to 150 lbs per hour – depending on materials, application and machine configuration. an 11” wide x 16″ long vibratory feed pan, (2) 12″ wide x 18″ diameter jacketed compression rollers each powered by a 7 drive, air over ...more
Sollich #KT620S cooling table, tunnel has recirculating chilled glycol water syst, 28" W x 300" L belt, AB PowerFlex Control
Frain Industries | Carol Stream, IL
Category: Food Cooling Tunnels
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Sollich
Model: KT620S
Sollich KT620S cooling table with jacketed bed for chilled glycol water with universal convection cooling from above and intensive cold water or glycol contact cooling below, 24" wide x 300" long neoprene conveyor belt, total aperture of 3-1/8" high by 25" wide, usable aperture of 2-3/4" in ...more
CMD #Icon-380, VFFS, w/ Bagger, 120 CPM, 2.4-15.7" width x 2.4-19.6" L bag max, AB Logix PLC, 2003
Aaron Equipment Co | Schaumburg, IL
Category: Form Fill Sealing Machines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: ICON-380
Year: 2003
used- cmd packaging systems model icon 380 vertical form fill & seal bagger. capable of speeds up to 120 cycles per minute. has a bag size range (with changeparts): 2.36" - 15.76" or 60mm - 400mm (width) x 2.36" - 19.6" or 60mm - 500mm (length). haas film registration and pull belt film drives. allen bradley logix ...more
6000 lb. Minster #MEF4-26S/MSH20-26-7/MEF4-26S, coil feed line, 26" x .150" stock, 60" OD, 16"-20" ID,
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Coil Feed Lines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: MEF4-26S/MSH20-26-7/MEF4-26S
Used Minster 6,000 lb x 26" Coil Feed Line, Model MEF4-26S. Handles up to 0.02" thick coils. Includes reel, straightener, and feeder. Max width: 26", max OD: 60", line speed up to 1200 IPM. Ideal for precision metal processing needs., COIL REEL:, Model: MR 6-26S, Serial#13-70460, Max Coil Weight: 6,000#, Max Coil ...more
Cat TL642D, Telehandler, 1492 hours, S/N: ML800407, 2016
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Telehandlers
Seller: Foley Equipment - Heavy Machinery
Location: Kansas City, MO
Mfr: Caterpillar
Model: TL642D
Year: 2016
;- FOLEY WORK READY -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, ALARM, BACK-UP, STANDARD, BELT, SEAT, 3", CANOPY, OPEN, CLIMATE PK, STD, DUAL BATTERY, COUPLER, MANUAL, IT, FENDER, CANOPY, SINGLE, FRAME, STABILIZER, NONE, HEATER,ENGINE BLOCK, 110V, INSTRUCTIONS, ANSI, LANE 2 ORDER ...more
JUST ADDED!
18" Timesavers #CS-180, Multi-Directional Deburring Machine, 27" Disk diameter, 4000 RPM, 15 FPM Conveyor, 7.5 HP, Vacuum Conveyor, Coolant Unit
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Belt Sanders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Timesavers
Model: CS-180
Affordable used TIMESAVERS CS-180 wide belt sander, 18" multi-directional deburring machine. s include 27" disk, adjustable speeds up to 4000 RPM, and vacuum throughput conveyor with coolant unit for efficient operations., Max Part Size: 18", Min Part Size: 4, Max Material Thickness: 3/16, Disk Diameter: 27", Abrasive ...more
Magnapower #OCP3512E, crossbelt separator, 60" W rotating cleaning belt, 2.2 KW,new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: OCP3512E
Mounts above a 48" (1200mm) wide or narrower belt (See drawing for ), Up to 14" (300mm) working gap, Industrial-grade permanent magnetic separator featuring an extra-wide effective magnetic field and a continuous self-cleaning belt system. Designed for high-volume material streams, this unit utilizes a deep-field ...more
43" Brown, dual flywheel trim press, 12.5" opening, oper.controls, AC motor, multi-speed gearbox, belt drive to flywheels, #37688
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Brown
Model: 37688
Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels.
Cam-wood #IAT-620-150HX, Medium Production Finger Jointer, 24" wide x 31.5" long belt, 1/2 HP, 180 FPM, 24" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Jointers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: IAT-620-150HX
Year: 2026
CAM-WOOD IAT 620-150HX INVERTER DRIVEN FINGER JOINT SYSTEM Lay-Up and Block-Staging Infeed Conveyor: -- 24" Wide x 31.5" long belt conveyor powered with 1/2 HP motors. The conveyor is controlled by the operating and system. Feeds at a constant rate of 180 FPM. Block delivery is controlled by the operator and machine ...more
JUST ADDED!
Denver #No. 18, Sub-A Flotation Cells, Bank of 10, 18 Cu. Ft./Cell, 7.5 HP/2 Cells, Forced Air Control Valves
Savona Equipment | Savona, BC
Category: Flotation Cells
Seller: Savona Equipment
Location: Savona, BC
Mfr: Denver
Model: NO. 18
Bank of 10.18 cubic feet per cell.Sealed stand pipes.Forced air control valves.Cell to cell flow control gates.Sand relief bushings7.5 hp motors - two cells/motor.Overflow discharge paddle shaft.Belt guards.Location: Savona, BC.
Burford #SBIL, sorbate applicator designed to apply an
Frain Industries | Carol Stream, IL
Category: Bakery Equipment
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Burford
Model: SBIL
Burford Model SBIL sorbate applicator designed to apply an even top and bottom coating of water soluble sorbate solution mold inhibitors or similar preservatives to various bakery products with production rates per hour – depending on materials and application. all stainless steel application chamber has a flip ...more
24" x 6.5" Ruesch #177, precision ring slitter with tooling, 0-285 FPM
International Rolling Mills | Pawtucket, RI
Category: Slitters
Seller: International Rolling Mills
Location: Pawtucket, RI
Mfr: Ruesch
Model: 177
Ruesch Model 177 Precision Ring Slitter, ideal for heavy-gauge slitting. Includes 96 knives and 194 spacers. Note: Lacks electrical controls and universal joints. Quality used condition, ready to enhance your production line., THIS SLITTER DOES NOT INCLUDE ELECTRICAL CONTROLS OR UNIVERSAL JOINTS., INCLUDED TOOLING: ...more
Loveshaw Corporation #LD-Series, High Speed Case Sealer, 0.75 HP, 9" width x 2' 7" L Conveyor Belt, 2' 4" infeed/exit H
Genemco | Hearne, TX
Category: Carton Sealer
Seller: Genemco
Location: Hearne, TX
Mfr: Loveshaw
Model: LD-SERIES
ITT Loveshaw / Little David High Speed Case Sealer. Model: LD-Series. Intertape Polymer Group High Speed Tape Head. Model HSD 2000NC, s/n 4NC-00390. Conveyor belt dimensions: 9 in. W x 2 ft. 7 in. L. Infeed/exit height: 2 ft. 4 in. Baldor Industrial Motor, ¾ hp, 1725 rpm, 115/208-230 V, 8.2/4.5-4.1 amps, 60 ...more
Yamato #CSG20LW-FOP, Checkweigher, 9.5" width belt conveyor, 17" L weighing section
Machinery & Equipment Co | Brisbane, CA
Category: Packaging Checkweighers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Yamato
Model: CSG20LW-FOP
Yamato checkweigher, model number CSG20LW-FOP, includes 9-1/2" wide belt conveyor with drive. Weighing section measures 17" long and complete with air reject system. Mounted on stainless steel frame and includes touch screen controls and printer. Serial number TA000071., Basis: FOB.
12" wide x 17.6' long, FEMC 9378-000-036, Stainless Steel conveyor, 40" infeed / discharge height and 1 HP drive with variable speed controller, mounted on (6 available) legs
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Femc
FEMC, stainless steel conveyor. 12" wide and 210" long, belt conveyor has 40" infeed / discharge height and 1 Hp drive with variable speed controller. Mounted on (6) legs., OAD: 220" L x 36" W x 42" H.
Stainless Steel, Z style bucket elevator, 144" discharge height, 1 HP side mounted motor drive
Frain Industries | Carol Stream, IL
Category: Bucket Elevator Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Stainless steel, Z style bucket elevator. Number of lbs of product per hour – depending on materials and application. white flexlink belt with inside dimensions of 11" long x 3" wide x 2" deep, set on 6" centers, has 72" long horizontal floor run with a 17" in-feed height to ...more
Excel #PP180844 and PP2028MK, L-bar sealer with heat shrink tunnel
Machinery & Equipment Co | Brisbane, CA
Category: Sealers and Sealing Systems
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Excel
Model: PP180844 AND PP2028MK
L-Bar Sealer with Heat Shrink Tunnel, manufactured by Excel Packaging Systems, Preferred Packaging models PP180844 (Tunnel) and PP2028MK (L-Bar Sealer). Tunnel opening measures 17.5" wide x 8.25" high, with 4' long heating zone. Tunnel includes controls for start/stop, heater, conveyor speed, and temperature ...more
22" wide x 21.2' long, Tri-Mach, Stainless Steel inclined cleated conveyor, 96" discharge height
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Tri-Mach
Tri-Mach, stainless steel inclined cleated conveyor with number of product per hour – depending on materials and application. 22" wide x 254" long belt with 18" wide x 2" high cleats set on 12" centers. 54" long horizontal run with16" in feed height, 112" long incline ...more
3" Ercolina #EN100, 1" - 3" Notcher, 1-1/4" Pipe Grinding Roller, NEW
Smith Machinery Co | Ames, IA
Category: Notching Machines
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Ercolina
Model: EN100
Minimum Diameter 1 inches Maximum Diameter 3 inches Belt Size 4" X 76 3/4" Belt Speed 100 FPS Dust Extraction Conventional Voltage Requirement 220V or 480V 3ph Motor 5 hp 50-60Hz Motor Speed 3,650 RPM Contact Wheel no Length, Width, Height 52 x 22 x 43 Shipping Weight 425 pounds, S:, * Quickly create perfect ...more
Loma #IQ4 / CW3-1500, combination metal detector & checkweigher, 10-140 FPM, touch pad controller w/LCD display & statis light bar
Frain Industries | Carol Stream, IL
Category: Metal Detectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Loma
Model: IQ4
Loma, Models IQ4 / CW3-1500, Combination metal detector and checkweigher. Rated from 10 to 140 feet per minute with number of product – depending on materials, application and machine configuration. Brushed 304 stainless steel construction. IQ4 Metal detector has working aperture of 6½" in Height x ...more
Dayton blower, 1 HP, 230/460 V., 12" x 14" outlet, single V-belt driven, 10" round intake
Ingalls Process Equipment | Painesville, OH
Category: Fans
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Dayton
one(1) used Dayton Blower, 1 hp, 230/460 volt. single V-belt driven 10" round intake 12" x 14" outlet.
11-3/4" wide x 11.6' long, Conveyor, 0.75 HP
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Conveyor. U.S. Electrical motor:.75 hp, 1750 rpm, 208-230/460 v, 2.8-2.8/1.4 a, 60 Hz, 3 phase. U.S. Electrical motor drive: 1 max input hp, 966 max output torque. Belt dimensions: 11 ft. 6 in. L x 11-3/4 in. W. Overall dimensions: 5 ft. 11 in. L x 2 ft. W x 3 ft. 4 in. H.
Magnapower Metal Sensor sorting & recovery system, 40",Touch screen LCD Control,vibratory feeder,new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Recovers many metallics your existing equipment misses., Sense and eject valuable materials including: stainless steel, copper and other metals., Up To 25TPH capacity depending on your material's density, size and surface area., Underbelt Coil Sensor Array, Air Jet, Solenoid Activated Material Ejector Array, Touch ...more
Cat TH255C, Telehandler, 2598 hours, S/N: JK204566, 2020
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Telehandlers
Seller: N C Machinery Co. - Heavy Machinery
Location: Williston, ND
Mfr: Caterpillar
Model: TH255C
Year: 2020
BATTERY, DISCONNECT SWITCH, BELT, SEAT, 3", CAB, ENCLOSED WITH HEAT + AC, CARRIAGE, STANDARD 50", Counterweight, COUPLER, HYDRAULIC, UNIVERSAL, ELECTRICAL CONFIG, ADSD-N PLUS, ENG SN 12490849 MSO B3FRT, ENGINE BLOCK HEATER, 110V, FAN, ENGINE, VARIABLE, FENDER, CAB, SINGLE, FORK, PALLET 2" X 4" X 48", HEADLINER, RADIO ...more
Disamatic #2013-MK5-BDMM, w/AMC & SBC conveyors, pattern changer, feed belt w/airator, 1999
FL Sales Inc | Solon, OH
Category: Foundry Molding Machines
Seller: FL Sales Inc
Location: South Pittsburgh, TN
Mfr: Disamatic
Model: 2013-MK5-BDMM
Year: 1999
1999 Disamatic model 2013 mk5-b dmm s/n 130045 with amc and sbc conveyors, and pattern changer, feed belt with airator ,mold count 2821832 not full count.
Caterpillar 304E2, Crawler Excavator, 1088 hours, S/N: ME407413, 2020
Butler Machinery Company | Sioux Falls, SD
Category: Excavators
Seller: Butler Machinery Company
Location: Sioux Falls, SD
Mfr: Caterpillar
Model: 304E2
Year: 2020
******* NOT VERIFIED*******, 2020 CAT 304E2 HYDRAULIC EXCAVAT, BATTERY, DISCONNECT, BELT, SEAT, 3" RETRACTABLE, BLADE, 77", BOLT-ON, BUCKET-HD, 12", 1.7 FT3, 3T, CAB W/ AIR CONDITIONER, CAMERA, REAR VIEW, CONTROL STANDARD PILOT, COOLING, HIGH AMBIENT, ELECTRICAL ARRANGEMENT, FILM, CALIFORNIA, FILM, PRODUCT LINK, ANSI ...more
1-1/8" Burr Oak #STCO5-M5, tube cut-off, reverse plane straightener w/sizing, 3 Available
General Machinery LLC | Detroit, MI
Category: Tube and Pipe Cut Off Machines
Seller: General Machinery LLC
Location: Detroit, MI
Mfr: Burr Oak
Model: STCO5-M5
Capacity: 1/8" - 1-1/8" diameter, Min length of cut: 3/4", Max length of cut: Limited by length of runout table, Burrless Cutoff tension clamp, Cutoff: Standard, Hitch Feed: Tandem Belt Feed 36" BHD50, Straightener: Reverse plane straightener w/ sizing, large capacity Pull-Apart: End Form 2-Hit.
34" wide x 9.4' long, Meyer Stainless Steel vibratory conveyor, 2-3/4" sidewalls, Quadra Eccentric vibrator
Frain Industries | Carol Stream, IL
Category: Conveyors Vibratory Feeders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Meyer
Meyer, stainless steel vibratory conveyor. 34"wide x 112"long bed with 2¾" sidewalls. Quadra Eccentric vibrator driven by 1hp gearmotor and A-B enclosed disconnect switch. 45"high outfeed and 51"high infeed with 1/2"diameter x 34"long water spray pipe. Unit is mounted on a ...more
20000 lb. Feed-Lease #R200M-36 / FLPS-5-36-5, coil reel uncoiler & pwrd straightener, 36" W, 72" OD, 20"-24" ID, 3-leaf mandrel, powered lift & travel
Nidec Press & Automation | Macomb, MI
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Feed-Lease
Model: R200M-36
Coil weight capacity: 20000 pounds, Stock Width Capacity 36 inches, Max Stock Thickness Capacity At Full Width.210 inches, Minimum expansion range: 20 inches, Maximum expansion range: 24 inches, Coil O.D. capacity: 72 inches, Feed Lease Coil Reel Uncoiler and Powered Coil Straightener Combination :, Coil weight ...more
Grinder, 1 HP, 115/230 V, on stand
Power Zone Equipment | Center, CO
Category: Double End Horizontal Grinders
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Grinder
Brand/Model: Grinder - : Used Grinder, belt driven by 1hp motor, on stand RPM.
Inline Mixer, high shear, liquids type, 2' x 40" x 32" tall, 7" diameter Mill, 1/2" top inlet, 1/2" side outlets, 30 HP, 1730 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: High Intensity Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel mixer, high shear, 30 hp, stainless steel, inline, apv. Inline mixer, liquids type, high shear, stainless steel, 7" diameter mill has 1/2" top inlet and 2 at 1/2" side outlets, locking top. Unit includes 30 HP, 1730 RPM, 230/460V TEFC motor, V-belt driven. Unit measures 2' x 40" x 32" tall, mounted ...more
Timesavers #22-03-9, multi-directional rotary brush, 39" length, 12" brush diameter, 38" passline, 2019
PM Machines | Santa Ana, CA
Category: Belt Sanders
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Timesavers
Model: 22-03-9
Year: 2019
One (1) Timesavers Model 2211-03-9 Multi-Directional Rotary Brush Machine that uniformly deburrs and finishes edges of laser cut, punched and machined parts in one pass, while improving the surface with a random scratch., Abrasive brush length: 39”, Brush diameter: 12”, Maximum stock width: 38” ...more
DMC #Unisand-K, used top and bottom widebelt sander, 2007
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Sanders
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Dmc
Model: UNISAND-K
Year: 2007
*Reduced Price!* 2007 DMC Unisand K USK1350 - IM3 + USK1350 used top and bottom widebelt sander.For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing ...more
I.J. White 26-A1577, Spiral Freezer, 13 Tiers, 1.5/3 HP Motors
Genemco | Hearne, TX
Category: IQF Spiral Freezers
Seller: Genemco
Location: Hearne, TX
Mfr: I.j. White
Model: 26-A1577
I.J. White Spiro-Freeze Spiral Freezer. Model: 26-A1–577. s: bolted construction, bottom load “up go" design and an I.J. White control panel. CRam Industrieser hour meter: 28,151 hrs. Belt : 670 ft. L x 26 in. W x 2-1/4 in. H product clearance. Belt material: stainless steel. Drum Frame model: ...more
Douglas Inc., 4 chamber shrink tunnel, mounted on height adjustable legs
Frain Industries | Carol Stream, IL
Category: Shrink Tunnels
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Douglas
4 chamber shrink tunnel. Aperture: 19-1/2" in Height; 31" in Width. Tunnel: 192" in Length. Temperature range: up to 500° F. a 24" wide x 271" long rubber belt conveyor, 4 temperature gauges, 48" cooling station, and conveyor speed controls. Mounted on height adjustable legs., OAD: ...more
Caterpillar 299D3, Track Loader, 2615 hours, S/N: DY902056, 2020
Warren Cat | Amarillo, TX
Category: Compact Track Loaders
Seller: Warren Cat
Location: Brownfield, TX
Mfr: Caterpillar
Model: 299D3
Year: 2020
299D CTL, 299D3 CTL DCA6B, BATTERY,EXTRA HEAVY DUTY, DISC, CAB PACKAGE, ULTRA, CERTIFICATION ARR, P65, DEBRIS MGMT PKG, NONE (DM0), DOOR, CAB, POLYCARBONATE, Engine, FILM, SELF LEVEL, ANSI, HEATER, ENGINE COOLANT, 120V, INSTRUCTIONS, ANSI, USA, Online Owner's Manual, PRODUCT LINK, CELLULAR PL243, QUICK COUPLER ...more
52" Timesavers #2311-45-1, Widebelt, Single Head, 5" thick, 15-45 FPM, 33-38" passline, 1830 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2311-45-1
Timesavers Model 2311-45-1 Single Head 52" Widebelt Sander : Abrasive belt size: 52x103" Main motor: 30 HP Maximum width stock: 51" Minimum part length: 15" Maximum thickness opening: 5" Feed speed: 15-45 FPM Passline height: 33-38" Dust extraction: 1830 CFM (5" static pressure) 2 CFM @ 90 psi Standard s: Dual Action ...more
Keyence #IM-8030T, Optical Comparator, Contact Height Measurement, 2024
Revelation Machinery | Chicago, IL
Category: Optical Comparators
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Keyence
Model: IM-8030T
Year: 2024
Make: Keyence, Model: IM-8030T, Year: 2024, Machine Location: California, The 2024 KEYENCE IM-8030T is a high-speed instant measurement system with a 300 x 200 mm wide stage, double telecentric lens, programmable ring illumination, and integrated contact height measurement for fast, precise 2D and 3D part inspection. ...more
Eriez #SC-2, electromagnetic crossbelt, 48" x 48" belt
Alan Ross Machinery Corp | Zion, IL
Category: Scrap Yard Machinery - Miscellaneous
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Eriez
Model: SC-2
Example Unit (SE‑7520), Belt Width 48″ × 48″, Dimensions 48″ L × 48″ W × ~25″ H, **Power Supply 115VDC, ~57A, ~6.6kW (oil-cooled).
Vorwood #L-79D, End Finisher & Foiler, 8.5" width x 80" L capacity, 2021
iBid Machinery | Roswell, GA
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Vorwood
Model: L-79D
Year: 2021
Product : The Voorwood L79 End Finisher is designed to precisely cut MDF mouldings to length, then sand both ends. Next, to complete the one-pass process, an applicator wheel with automatic heat control applies the transfer finish. A louver end foiler is a production-oriented machine designed for reliability and ...more
Bird #40, vertical pressure screen, Stainless Steel, belt driven
Global Equipment International | Chalfont, PA
Category: Screens and Sifters
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Bird
Model: -40
107775 One (1) used Bird Model 40 vertical pressure screen, 4-foil rotor with.072" holes in basket, Belt driven, S/N CN1303.
JUST ADDED!
Keestrack #Frontier, Portable Screen, 600 Ton Capacity, 30 Ton Weight, 4500" x 1800' mm Screen Box, 8 cbm Feed Hopper, 2007
Ex-Factory | Charlotte, NC
Category: Screens
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Keestrack
Year: 2007
KEESTRACK - Frontier: Portable ScreenerTechnical -- Capacity: Up to 600 ton. -- Weight: 30 Ton. -- Screen box (L x W): 4,500 x 1,800 mm. -- Feed hopper in HB450: 8 cbm. -- Hydraulic folding hopper for transport. -- Heavy-Duty Plate Apron Feeder: 3,560 x 1,300 mm. -- Loading height. Open back wall: 2,420 mm; half open ...more
Toschi Tosotec, 132" belt driven unwind stands, 72" diameter, 1998
Global Equipment International | Chalfont, PA
Category: Paper Slitters and Rewinders
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Toschi
Year: 1998
904118 Three (3) 134" (3400mm) Toschi belt driven unwinds capable of handling 72" OD rolls. Independent motor driven stands with belt drive. MFG 1998. Last ran tissue grades. Units are set up to handle reel spools off of paper machine. Installed and available due to complete plant closure..
JUST ADDED!
Evapco #AT-212-4N24, Cooling Tower, 2-Cell Induced Draft, Galvanized Steel
C3 Surplus LLC | Miami, FL
Category: Cooling Towers
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Evapco
Model: AT 212-4N24
OVERVIEW, This is an Evapco West Model AT 212-4N24 cooling tower with Baldor Reliance Super-E pump motors. Serial Number 22P124419, Belt No. 6B148. Manufactured by Evapco West, Madera, CA — Made in USA. Two-cell induced draft cooling tower on elevated structural steel support frame with walk platforms, safety ...more
BMI / Benda MFG, Stainless Steel, inclined cleated conveyor, equipped with 12" to 15" infeed height, 12" wide conveyor belt with 2" high cleats set on 12" centers
Frain Industries | Carol Stream, IL
Category: Miscellaneous Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Bmi / Benda Mfg
BMI / Benda MFG, stainless steel, inclined cleated conveyor. 12" to 15" infeed height, 12" wide conveyor belt with 2" high cleats set on 12" centers. Conveyor has 22" long bottom horizontal run, 41" long incline, 20" long top horizontal run with 33" to 36" discharge ...more
Chocolate enrober, top & bottom, 40" W x 36" L Stainless Steel mesh belt, puddle style bottom applicator, waterfall style top
Frain Industries | Carol Stream, IL
Category: Chocolate Candy Enrober
Seller: Frain Industries
Location: Carol Stream, IL
Stainless Steel, 40" wide, top and bottom chocolate enrober with pounds of product per hour – depending on materials, application and machine configuration. a 40" wide x 36" long stainless steel mesh belt thru the enrober, puddle style bottom applicator, waterfall style top applicator, hot air ...more
Straw applicator, Geyssel #477, up to 7200 applications per hour, thermo foil treatment unit for smoothing straw wrapper for glue application
Frain Industries | Carol Stream, IL
Category: Miscellaneous Packaging Equipment
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Geyssel
Model: STRAW APPLICATOR
Geyssel, model 477, straw applicator. Rated up to 7,200 applications per hour – depending on materials and application. 198″ long x 3” wide through conveyor with a 35″ infeed height, thermo foil treatment unit for smoothing straw wrapper for glue application, 6″ diameter applicator wheel ...more
24" wide x 8' long, FMC Link-Belt #EL-2412/08X70, vibratory conveyor, 1 HP, 460 V., 1999
Aaron Equipment Co | Schaumburg, IL
Category: Conveyors Vibratory Feeders
Seller: Aaron Equipment Co
Location: Belvidere, IL
Mfr: Link-Belt
Model: EL-2412/08X70
Year: 1999
used- fmc model el 2412/08 x 70 link-belt vibrating conveyor. stainless steel construction. dimpled trough approximate 96" long x 24" wide x 8" deep with 11-3/4" diameter discharge. driven by 1hp motor. serial# 806532 12/99. 3/60/460 volt.
Trine #4500GS, Stainless Steel, roll fed, wrap around, hot melt glue labeler and shrink tunnel rated from 50-200 containers per minute
Frain Industries | Carol Stream, IL
Category: Labeling Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Trine
Model: 4500GS
Trine, Model 4500GS / 105, stainless steel, roll fed, wrap around, hot melt glue labeler and shrink tunnel rated from 50 to 200 containers per minute – depending on materials, application and machine configuration. Container size range: 1.625" to 5" in diameter, capable of handling containers made of ...more
36" x .156" Perfecto #EF-600, servo roll feed, 6" roll diameter
Nidec Press & Automation | Macomb, MI
Category: Servo Feeders
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Perfecto
Model: EF-600
Stock Width Capacity 42 inches, Max Stock Thickness Capacity At Full Width.125 inches, Feed Roll Diameter 6 inches, Stock thickness capacity:.125" x 42" Wide, Stock thickness capacity:.250" x 18" Wide, PERFECTO Servo Roll Feed, Six inch diameter upper and lower feed rolls, Piloting upper feed roll, Adjustable stock ...more
Mettler Toledo, Safeline, Inc., Hi-speed Checkweigher & Safeline Metal Detector Conveyor, 9.75" width x 5.87" H x 11.25" L Aperture, 8" wide belting
JM Industrial LLC | Millwood, WV
Category: Metal Detectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Mettler
Used Mettler Toledo Hi-speed Checkweigher & Safeline Metal Detector Conveyor, Serial No: S000201-2A, Conveyorized Checkweigher/Metal Detector with left to right operation, Checkweigher: Micromate Hi-Speed model with touch controller, Metal Detector: Safeline Series with V2 controller; Aperture Size 9.75"W X ...more
Superfici Moulding Sprayer, 10' belt, 11.8" 04 head, 80-240 FPM, w/ Sander & Conveyor, 2023
iBid Machinery | Roswell, GA
Category: Wood Finishing Equipment
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Superfici
Year: 2023
Product : 2023 Superfici Moulding Sprayer with with Sander and Conveyor - California, Machine Location State: California, Machine Location City: Irvine, Year: 2023, Make: Superfici, Model: See and models in photos, Serial No:, Phase/Voltage: 3PH, Condition: Excellent Used Condition, Any Known Issues: No, In ...more
JUST ADDED!
52" industrial sander/mic, Curtin Hebert #450
Custom Materials Inc | Chagrin Falls, OH
Category: Miscellaneous Sanders
Seller: Custom Materials Inc
Location: Chagrin Falls, OH
Mfr: Curtin Hebert
Model: 52 INDUSTRIAL SANDER/MIC
Year: 2010
Precision Sanding on CMP Products, Mica, Insulation Materials, Balsa, Composites, Rubber, Friction Materials, High Pressure Laminates, Floor Tile, Veneer, Plywood, Hollow Core Doors, Brake Parts, Fiberglass, Curtin Hebert sanders are considered one of the premier industrial sanding equipment built to this day. Located ...more
Ransohoff CAE #LeanVeyor, 15" x 24" Parts Washer with Sliding Access Doors, Chip Baskets, Belt Type Oil Skimmer and Stainless Steel Exhaust
Southern Fabricating Mchy Sales | Lithia, FL
Category: Conveyor and Pass Through Parts Washer
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ransohoff
Model: LEANVEYOR
15” X 24” Parts Washer with Sliding Access Doors, Chip Baskets, Belt Type Oil Skimmer and Stainless Steel Exhaust., Largest Parts: 15” H X 24”, Smallest Parts: 1” H X 4”, Diameter Weight Range: 4-250 Lbs, Conveyor Speed: 2 FPM, Flow, Load: 26”, Load Vestibule: 24”, Wash: ...more
SureKap #SK6000-BF6, automatic, inline, Stainless Steel, 3 station, 6 spindle roll over conveyor capper & capacity feeder
Frain Industries | Carol Stream, IL
Category: Neck Banders and Cappers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Surekap
Model: SK6000-BF6
SureKap Model SK6000 BF6-70, automatic, inline, stainless steel, 3 station, 6 spindle roll over conveyor capper and cap feeder with number of containers per minute – depending on materials and application Cap size range: 22mm to 70mm. 120" long x 4-1/2" wide stainless steel container conveyor, 21" ...more
Cat TH514C, Telehandler, 6495 hours, S/N: MWC00469, 2015
Boyd Cat Company | Parkersburg, WV
Category: Telehandlers
Seller: Boyd Cat Company
Location: Louisville, KY
Mfr: Caterpillar
Model: TH514C
Year: 2015
AXLE ARRANGEMENT, STANDARD, BATTERY, DUAL, 75KW ENGINE, BELT, SEAT, 3" RETRACTABLE, BOOM, STANDARD, Cab - Enclosed, CONTROLS, FORKS PATTERN, COUPLER, HYDRAULIC, IT, DRIVESHAFT, STANDARD, ENGINE,75KW, C3.4B, T4I, ENV CTRL, AIR CON, STD BOOM, Fenders, HEATER,ENGINE BLOCK, 110V,75KW, HITCH, RETRIEVAL, NON-ROAD ...more
Frigoscandia #AGA, inline, Stainless Steel, cryogenic, nitrogen gas, belt freeze tunnel, 48" W x 8" H aperature x 27' L Stainless Steel liquid nitrogen freeze chamber
Frain Industries | Carol Stream, IL
Category: Lab Freezers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Frigoscandia
Model: AGA
Frigoscandia Model AGA, in line, stainless steel, cryogenic, nitrogen gas, belt style freeze tunnel with temperatures and number of product per hour – depending on materials, application and machine configuration. 47" wide x 8" high aperature x 250" long stainless steel nitrogen freeze chamber ...more
9" wide x 6.8' long, G2 Material Handling Inc. cooling conveyor, Stainless Steel, variable speed controls
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: G2 Material Handling Inc.
G2 Material Handling, 9" Wide x 80" Long, stainless steel, cooling conveyor. a 9" wide x 80" long stainless steel mesh belt, 7½" wide x 10" long charge opening with a 27" to 36" infeed height, 25" to 34" discharge height, lexan covers with 2" clearance ...more
