Buy or Sell Your Wide Belt Sander

Northtech Model NT-10-1300RC 51" 2 Head Wide Belt Sander Working Width: 51" Sanding Heads: (2) (1) 10" 75 durometer spiral fluted roller, (1) Heavy duty 6" combination head 65 durometer with 3.4" felt Main Spindle Motor: 30HP / 25HP Conveyor Motor: 5HP Table Elevation Motor (PLC Touch Screen): 1HP Configuration: ...more

Butfering Model SBR413TBB Wide Belt Finishing Sander Width Capacity: 53" Head #1: Longitudinal Wide Belt with Segmented Platen and Internal Chevron Belt, 13.5 HP Motor Head #2: Cup Brush Sanding Heads (Qty 10), 10 HP Motor Head #3: Drum Brush Sanding Head, 4 HP Motor Head #4: Drum Brush Sanding Head, 4 HP Motor Feed ...more

Rotating Conveyor cleaning brush, motor driven, Niagara 10 Wet Dust Colection System with ducting kit.

BOERE - TKS 900,.2-Head Top Wide Belt Sanding Machine900 mm (36") Working width; : (1) Contact roller, (1) Fine sanding pad. Head Configuration -- 1st Head: Rubber contact roller, spirally grooved, Shore hardness 80, diameter 265 mm (10.4"), driven by 18 kW (25 HP) motor. -- 2nd Head: Sanding pad, electronic-pneumatic ...more

SERIAL. 22086 MODEL. 243-1M NEW. 1992 WIDTH OF BELT. 43" WORK HEIGHT UNDER BELT. 8" MAXIMUM CONTACT WHEEL DIAMETER. 9-1/2" IDLER ROLL DIAMETER. 8" INFEED CONVEYOR EXTENSION. 27" BELT SIZE. 43" X 75" CONVEYOR BELT SPEED. 20 TO 60 FPM VARIABLE PASSLINE HEIGHT RANGE. 38" TO 30" CONVEYOR BELT HEIGHT. HANDWHEEL ADJUSTABLE ...more

This is an Italian made machine., Not sure of the year of manufacture, Serial number 14136, 230v 3 phase., Works great. I used it to sand wood instrument tops, backs, and sides., Machine will sand very thin material., I replaced the feed belt when I purchased the machine, I am not a dealer. Just a woodworker who no ...more

, Variable belt speed for conveyor.

SERIAL. 12354, MODEL. #300, BELT WIDTH. 6", BELT LENGTH. 18", DISC SIZE. 12", DISC TABLE TILTS. 45 DEGREES, GUIDE ON BELT TILTS. 45 DEGREES, MAIN MOTOR. 1 HP.

MODEL #: N/A, SERIAL #: N/A, 6" x 48" BELT STYLE SANDER, 480/3/60.

Stock #: 114250080, Location: Decatur, GA, Approx. Shipping Weight: Local Pick Up Only, Approx. Shipping Dimensions: 6'1" H 1'8" L 1'10" W(Local Pick Up Only), Belt Size: 2" x 60", Motor HP: 1/2, Electrical: 115V/1PH, Additional Info, The Belt Sander can be demoed upon request, check ...more

SERIAL.8430296, MODEL. #30, BELT WIDTH. 6", BELT LENGTH. 48", DISC SIZE. 12", DISC TABLE. 6-1/2" X 14-1/2", DISC TABLE TILTS. 15 TO 45 DEGREES, GUIDE ON BELT TILTS. 45 DEGREES, BELT SPEED. 2375 RPM, MAIN MOTOR. 1 HP.

JET 6″ x 48″ Industrial Belt Finishing Machine, J-4301A, Inventory # 9926-P, Model: J-4301A, S/N: 14040221, View the JET J-4301A Belt Sander PDF Here, Belt Size: 6″ x 48″, Belt Table Size: 7 3/8″ x 14 3/4″, Belt Table Tilt: 45° Out, 20° In, Table Slots: 5/8″, Motor: ...more

Motor 110 V, 1 PH, 1.5 HP, 1,720 RPM, 12 AMPS, 6" flat belt, 6 x 20.5 long, 12" belt.

MODEL #300, BELT WIDTH. 6", LENGTH OF. 18", DISC SIZE. 12", DISC TABLE TILTS. 45 DEGREES, GUIDE ON BELT TILTS. 45 DEGREES, 1 HORSEPOWER MAIN MOTOR.

SERIAL. 3273, NEW. 1995, MODEL. 37B/84, UNDER DRIVEN ABRASIVE GRINDING BELT, WIDTH OF ABRASIVE BELT. 36", WIDTH OF CONVEYOR BELT. 36", WORK PIECE THICKNESS. 0" TO 6" MAXIMUM, LENGTH OF ABRASIVE BELT. 84", LOADING AREA. 42" X 22", UNLOADING AREA. 42" X 34", CONVEYOR BELT SPEED. 30 TO 90 FPM, DIAMETER OF RUBBER CONVEYOR ...more

Overview, Type:Wide Belt SandersManufacturer:TIMESAVERSModel:LYNX 37MWT-D-60Status:For SaleCountry:United States, 6" Diameter Adjustable Contact Drum, Constant Passline, NEMA 12 Electrical Enclosure, Automatic Conveyor Belt Tracking, Infeed Stop Bar, Dual Infeed & Dual Outfeed Holddown Rolls, Hour Meter ...more

SERIAL.703019, MODEL.612V, WIDTH OF BELT. 6" X 48", BELT SPEEDS. 2850 RPM, DIAMETER OF DISC. 12", DISC SPEED. 2500 RPM, BELT RPM. 2800, TABLE TILTS. 45 DOWN & 20 UP, BELT TABLE SIZE. 6-1/4" X 14", DISC TABLE SIZE. 12" X 14", BELT VORIZONTAL OR VERTICAL. YES, DRUM STYLE DUST COLLETOR. YES, MOTOR. 1 HORSEPOWER.

Product KALAMAZOO INDUSTRIAL BELT SANDERMODEL- S660MV, WIRED- 3HP 230/460 3PH CURRENTLY 460V, BELT SIZE- 6″ X 60″, BUILT IN DUST COLLECTOR.

SERIAL. 18010008, MODEL. BD31A, WIDTH OF BELT. 6", LENGTH OF BELT. 48", DIAMETER OF DISC. 12", DISC RPM. 2375, AREA TABLE. 7" X 17-1/4", BELT POSITION HORIZONTAL & VERTICAL. YES, TABLE TILTS. 0 TO 45 DEGREES, ABRASIVE BELT SPEED. 2850 SFPM, DUST COLLECTOR. YES, DUST COLLECTOR CFM. 400, MOTOR HORSEPOWER. 2.

Crouch 7″ x 125″ Edge Belt Sander, VH-87, Inventory # 9181, Model: VH-87, S/N: 061094, Abrasive Belt Size: 7″ x 125″, Abrasive Belt Speed: 3,700 FPM, Diameter of Drive Pulley: 8″, Diameter of Idle Pulley: 3 1/2″, Size of Wooden Side Table: 12″ x 48″, Size of Wooden End ...more

Product Ryman Engineering Lathe Mount Belt Grinder, Model 712-LA, Motor- 7.5 hp 230/460 3ph, Uses a 3″ wide belt, Weight 340 lbs.

25” X 5-½” Widebelt Sander with Clock-Wise Rotation of the Sanding Belt, Rubber Covered Contact Sanding Drum, Variable Speed, Pneumatic Belt Tensioning, Double Infeed & Outfeed Covered Hold-Down Rolls, Safety Interlocks and Motor Load Meter., Width of Belt: 25”, Material Thickness: ...more

LASM VOLPATO LS-2 NSS Feed Through Top and Bottom Molding Sander with Inverter Controlled BeltsMolding sander with (2) opposing abrasive belt units with Inverter control on both sanding heads. The profile sander comes with an extension table to support large panels. The regulation of the axis and inclination is manual ...more

, Manufacturer: Cemco, Stock Number: 13856, s:, Powered conveyor, Manual table height adjustment, Belt width - 24”, Belt length - 85”, Table height adjustment - 11”, Main motor - 10 HP / 1750 RPM, Volts - 230/460, Phase - 3, Cycles - 60, Amps - 26.2/13.1, Conveyor motor - 1 HP, Approximate dimensions ...more

9"1 (Belt)Drum3.25" Diameter5 HP10 - 30 FPM1" - 3"60" L, 9" W.

Abrasive belt size: 37” x 60”, Maximum part width: 36”, Minimum part length: 8”, Constant conveyor height: 38”, Drum and brush diameter: 6”, Mechanical part thickness: Manually adjusted 0” – 8”, Variable speed conveyor drive: 15 – 45 F.P.M., 20 HP ...more

TIMESAVER 2111-13-0 37” Metal Wet Sander 2005’ Stainless # 7841, ImperialMetricWidth of Belt 37" 939.8 mm Power 15 hp 11.2 kW Dimensions 52” L x 66” W x 74” H 52” L x 66” W x 74” H Weight 4000 Lbs. 4000 Lbs. TIMESAVER 2111-13-0 37” Metal Wet Sander 2005’ ...more

Belt Dimensions: 37” wide x 60” long, Drum head type: standard, Drum Diameter: 6”, Disc brake on main motor, 0-8” opening (38” constant passline), Double infeed & outfeed holdown rolls, 15-45 FPM feed speed A/C (reversing), Lubrication system: Automatic, Air knife dryer with blower ...more

36” GRINDINGMASTER MCSB/B2-900 (3) Head Timesaver Sander, Reference #6613, Model # MCSB/B2-900, Serial # TS1376-04, Working width- 36”, Belt width- 36”, Belt length- 60”, Conveyor width- 36”, Feed belt speeds- 15 – 65 F.P.M., Material thickness- 0 – 5”, Head (1)- Belt ...more

Weight6125 pounds, SERIAL. 21901, NEW. 1991, MODEL. 343-1SG SLAG GRINDER, BELT. 42" W X 75" L, CONVEYOR SPEED. 18 TO 25 FPM, VARIABLE HEIGHT. 0" MIN, 6" MAX BELT SPEED. 5000 SFPM LOADING AREA. 24" X 42" UNLOADING AREA. 16" X 42" PASS LINE. 30" TO 36" HIGH HEAD LIFT. PNEUMATIC POWER BELT TENSION. PNEUMATIC BELT ...more

WYSONG & MILES 604 DOUBLE SIDED OSCILLATING EDGE SANDERDouble Sided Oscilating Edge Sander with 7.5 HP - 1,800 RPM TEFC motor; (2) 11" x 60" cast iron platens; 10" x 172" abrasive belt size, (150) oscillations/Min with 1/2" movement, 0.5 HP oscillation motor.: -- (2) 11-1/2" x 62" Cast iron side tables and (1) ...more

, The Kalamazoo KS490HV-5 is a 4" x 90" industrial belt grinder featuring a 5 HP, 3-phase motor (220/440V), producing 69007200 SFPM for fast metal removal. It includes a 400 CFM dust collector base (DCV-6), an 8" x 6" serrated 70-duro contact wheel, a 24.5" reversible platen, and a magnetic switch, all designed for ...more

Kalamazoo Industries Knife Sharpener 1″ x 42″ Belt Sander, 1SMVP, Inventory # 10115, Model: 1SMVP, Made in USA, Belt Size: 1″ x 42″, Speed: 1,800 SFPM, Machine Dimensions: 12″ x 17″ x 28″ H, Machine Weight: 35 lbs., Motor: 1/3 HP / 115v / 1ph, Standard s & Equipment ...more

Houfek Buldog 7-3M-1100-RRC 3 Head wide belt sander43" width cap, Roller / Roller / Combination-headHead Configuration1st Head – Rubber – 90 shore @ 200mm (7.9";) dia.2nd Head – Rubber - 90 shore @ 2000mm (7.9";) dia.3rd Head– Rubber - 45 shore @ 200mm (7.9";) dia. with adjustable platen. -- ...more

25.6 COSTA LEVIGATRICI MD7CC650 DRY-TYPE WIDE ABRASIVE BELT METAL SANDER GRINDER - (3) variable speed adjustable heads - AAF 3-1H dust collector - 2018, 25.6 COSTA LEVIGATRICI DRY-TYPE WIDE-BELT METAL SANDER/GRINDER, New 2018, Serial No MB831005A, Model MD7CCC650, ;, PLC Controller w/Touchscreen Interface, (3) 11 KW ...more

TIMESAVER #50-19MW 19” Wide Belt Wet Sander 7.5 H.P. #8051, TIMESAVER #50-19MW 19” Wide Belt Wet Sander 7.5 H.P. #8051, Reference #8051, Model # 50-19MW, Serial # 12500, Belt width- 19”, Minimum / Maximum part thickness- 0-3”, (2) Front hold down rollers, (2) Rear hold down rollers, 7.5 H.P. ...more

EMC FLEXY 1350 2RP Finishing Sander with (2) Sanding Heads, Roller and Segmented Finishing PadUseful working width 1,350 mm (53"). Working thickness min./max. 3 - 180 mm (1/8" - 7-1/16"). Head configuration:1st Head: Roller "R" Belt dimensions: 2,620 x 1,370 mm (103" x 54"). -- Roller diameter: 250 mm (10"). -- Roller ...more

Make: Houfek, Model: 1100 RC Buldog, Year: 2006, Machine Location: Colorado, Sanding Heads:, Head #1: 6″ Diameter Rubber Drum, Motor: 20HP, Head #2: Combination Drum/Pad, Type: Rubber Drum / Air Pad Platen, s: Anti-dub control, Motor: 15HP, Sanding Belts:, Size: 43″ x 86″ (Head #1 & #2 Drum) ...more

TIMESAVER 337-2 Wide Belt Sander, (2) Heads36" Width cap., Drum, Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Drum with Platen 30 HP motor. -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP feed drive; Variable feed ...more

RAMCO DW-25R METALWORKING WIDE BELT SANDER 25" Width cap. up to 5-1/2" material thickness. 25" X 60" Sanding Belt. Centralized controls allow you to access all the needed buttons right on one simple panel for more convenience. -- Clock-wise rotation of sanding belt for deburring and polishing of metal materials. -- ...more

SANDINGMASTER - CSB2-900: Wide Belt Sander, (2) Heads36" Width cap. and Drum & Platen.Head Configuration -- 1st Head: 6" Dia. rubber-covered contact roll; 24 HP motor. -- 2nd Head: Finishing platen: 18 HP Motor. -- 37" x 75" Abrasive belt with: Electronic tracking. -- 1.5 HP Feed motor with: 23 & 46 FPM. -- ...more

Stock #: 114250119, Location: Decatur, GA, Brand: Burr-King, Model: 562, Serial #: Asset #930, Approx. Shipping Weight: 250 lbs, Approx. Shipping Dimensions: 4' L x 4' W x 5' H, Skidding Fee: $100, Belt Size: 1" x 42", Motor: 1/2 HP, Approximate Machine Dimensions: 3' L x 2' W x 5' H ...more

TIMESAVERS 252-4-IC,. Wide Belt Sander, 4-Head.4-Head, 51" cap. - Great sander for solid wood and veneer panels (2) Contact rolls and (2) Air platens. Head Configuration1st Head: Rubber covered contact roll, 9-1/2" dia. 60 - 70 Durometer, 40 HP motor.2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer ...more

Stock #: 114250064, Location: Decatur, GA, Brand: Burr-King, Model: 562, Approx. Shipping Weight: 200 LBS., Approx. Shipping Dimensions: 4' L x 4' W x 5' H, Skidding Fee: $100, Belt Size: 1" x 42", Motor: 3/4 HP, 3450 RPM, Electrical: 115/208-230 V, 9.6/5-4.8 A, 60 Hz, 1 ph, Emergency Stop Switch ...more

Style (Type) Wide Belt, Maximum Board Width (In.) 43, Maximum Board Thickness (In.) 6, Minimum Board Length (In.) 12, Minimum Board Thickness (In.) 1/8, Feed Rate (FPM) Variable from 15 to 49, Sanding Belt Speed (FPM) 2,625, Sanding Belt Size (In.) 43 x 75, Table Height from Floor (In.) 31-3/8 - 37-3/8, Air Required ...more

EMC VENUS 1300 1K. Finishing Sander with (1) Sanding Head: Combination Head.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").Working Unit: Combination Roller & Pad. -- Roller diameter 142 mm (5-5/8"). Rubber covered hardness 85 Shore. Roller pressure adjustment control ...more

Wilton Model 4830 Belt Sander, Asset # 17627.