Buy or Sell Your Rewinders

Used NJM-CLI wrap-around labeler, model 326VLRDBP, stainless steel construction, with label printer, label feeder and waste web rewinder, touchscreen controls, 230 volts, serial# 5141. As Is.

UNIMAK SM 1600-FPB Rewind Slitter with Rotary KnivesUNIMAK offers a well built machine with air shafts and rotary knives for slitting heavier products up to 16 mils thick.Technical : -- Working Width 1600 mm ( 63"). -- Max. Roll Diam. 600 mm ( 23-5/8"). -- Max. Foil. Thickness 0.40 mm (16 mils). -- Slitting Speed Max. ...more

Used Stanford Model 142 Doctor machine Roll width: 30" Unwind air shaft diameter 3" Rewind air shaft diameter 3" Max Roll diameter : 24" Max Roll Weight: 400 LBS. SEW-EURODRIVE ,Inc. USA HP :5, Volts: 230TT? 460Y, HZ: 60 S.F 1.0, Duty : Cont. RPM: 1630 Edge guide Do not exceed 1000 FPM., 30"24"400 LBS.

-Stanat Traverse Winder Model HTR 14 1500 Hydraulic, -Guild Welder Model DMA-100-3, -5000 lb Cooper Weymouth Uncoiler 18 wide Electric Brake.

13.25" WIDE ROTOFLEX DLI 330 SLITTER REWINDER, SPEEDS UP TO 750 FPM, (2) DIE STATION WITH AN 18" REPEAT ANVIL, MFG 2005, ELECTRICAL 460V 80AMP 60HZ 3PHASE, SIEMENS DRIVE.

904364.002 One (1) 14" May Coating Technologies Pilot Coating Line Allen Bradley controls Two unwind stations, 18" diameter, 3" core Web steering Web tension rewinds:.25 - 4 Pli Web tension unwinds:.25 - 7 Pli Two coating stations, 14" maximum coating width. 16" face rollers Coating station 1: Knife over roll, presure ...more

118" (3.0M ) TRIM BELOIT FOURDRINIER PAPER MACHINE 1000 FPM (PM# 2), Mec-Fab 130" Slice Air Pad HeadBox MFG 1993 with (22) Automatic Profile Adjustments, Mec-Fab Cantilevered Fourdrinier Section MFG 1993, (10) Suction Boxes; Foils; Wire Tension System; Wire Showers and Trim Showers, LG Industries Suction Couch Roll ...more

52" Wide Uteco Horizon 130 Solventless Laminator, Upgraded PLC, web guides & control panel in 2022, Water and solvent based, 40" diameter turret unwind, 3" & 6" air shafts, Two Enercon corona treaters, Smoothing bars, Chambered doctor blade system new in 2025, 32" diameter turret rewind, Still installed and ...more

One (1) Used 104" Toschi Two Drum Slitter Rewinder for Tissue, Grammage: 11-27 gsm, Max web width: 104" (2650mm), Max parent roll diameter: 86" (2200mm), Max finished roll diameter: 70" (1800mm), Overhead crane included, Currently erected in Europe, out of operation.

One (1) 72" Used Dusenbery Model 335 Duplex Turret Slitter., Can be run for a customer, Purchased in 2000., Two motor Eurotherm 590 Vector DC drive with an Allen Bradley SLC 500 and a Panelview 1000 Color touch, The unwind is equipped for 40" diameter rolls on either 3" or 6" cores. It is edge guided., Dual position ...more

Make: LaON Technology, Model: Pilot, Year: 2025, Machine Location: Upon Request, Four-lane carbide knife cutting with ±0.1mm accuracy and <20m burr, Wheel-type knife system with AC reversible motor drive and fixed block configuration, EPC system with speed control motor for electrode positioning and ...more

62" Wide PCMC 8 Color Printing Press, Still installed and running, Allen Bradley controls, Fife web guide, Geared press with 1/4" pitch, AVT Inspection, Max web width: 62", Max print width: 61", Min to Max repeat: 12 inch to 40 inch, Unwind / rewind max diameter: 40inch, Speed: 1000 fpm, Ink pumps included? yes ...more

VoorWood Slitter rewinder. 165 doble Output pneumatic shaft. 3 & 4 inches, input 3, 4, 6 & 12 inches. Speed control and counter length for automatic stop.

2023 Catbridge 324 MC Turret Rewinder with integrated unwind and laminator system. Manufactured April 2023 with only approximately 24 machine hours. 3 unwinds, 2 laminators, Enercon corona treater, scrap rewind, finished product rewind, pack-out conveyor, hoist, upender, monorail lift, and roll cart system. Operating ...more

Ruesch Rewind Tension Bridle, -N2729G 6043, -Entry Separator Tooling Bars, -5" Dia. x 20" Face Bridle Rolls, Rubber Covered, -Passline Height: Approx. Range 48" to 62", Height is adjustable thru AC Motor and Screw Jack, -Overall Size: 40" L x 29" W x 64" High, -In Storage: Toledo, OH.

Make: Brotech, Model: DF330, Year: 2021, Machine Location: Upon Request, Maximum Web Width: ~340 mm (13.4″), Unwind Reel Diameter: Up to 800 mm, Rewind Reel Diameter: Up to 700 mm, Max Die Cutting Width: 330 mm (13″), Semi-Rotary Die Cutting Max Speed: ~60 m/min, Working Speed (Web): ~120 m/min, Die ...more

, MANUFACTURER - HUNTER ENGINEERING, PRODUCT - ALUMINUM, GAUGE RANGE -.250" (6MM) -.006" (.15MM), COIL WIDTH - 66" (1676MM) - 33" (838MM), COIL DIAMETER - 55" (1,397MM) - 20" (508MM), WORK ROLL DIAMETER - 15 _" (400MM), WORK ROLL FACE - 80" (2032MM), BACK-UP ROLL DIAMETER - 38" (965MM), BACK-UP ROLL FACE - 74" ...more

GALLUS LABEL MASTER FLEXO PRESS, MODEL 440, MFG 2022, APPROXIMATELY 50 HOURS OF RUN TIME, 17.5"/445mm MAXIMUM WEB WIDTH, MACHINE SPEED 656FPM/200MPM, UV & HOT AIR DRYING, 3 EXTRA INK CHAMBERS, 1 WEB TURN BAR, MATRIX WASTE REWINDER, RDC DIE CUTTING, WEB VIDEO SYSTEM, 21,782 OF PRODUCT PRODUCED, CURRENTLY INSTALLED ...more

2000 Sanden Quantum 1250 (6) Color Variable Cutoff Web Press System, 28” & 24” Cutoff X 20.5” Width, - (1) Enkle Splicer Model I32650SE Max roll 2500 LB, - (1) Sanden Quantum 1250 Infeed with web guide, - (6) Sanden Quantum 1250 non-perfecting printing units, - (3) Print Cylinder Inserts ...more

64.75" x 50,000# Pro Eco Tension Level / Slitting Line, -Materials: Aluminum Alloys, -Incoming Coil Sizes:, Coil Outside Diameter: 36" Min - 103" Max., Coil Weight: 50,000 lbs. Max., Coil Width Before Slit: 29" Min. - 64.750" Max., Coil Width After Slit: 28" Min. - 62.50" Max., -Width Tolerances:, 1/2 Comm Tolerance ...more

used- parkinson duplex slitter/rewind, model 845. 3.94"-63" slit width ranges; 48" unwind diameter; 38" min. core; 72" max. core; 5000 lbs. max roll weight; 0.5-2.5 pounds/linear inch tension control. winding station: 40" max. winding diameter; 72" shafts max. web; 0.5-2.5 pounds/linear inch tension. shaftless ...more

Hunter-GFG Paint Line, Material: Aluminum, Line Speed: 125 FPM Min, 500 FPM Max., Entry Section Speed: 125 FPM Min, 650 FPM Max., Exit Section Speed: 125 FPM Min, 650 FPM Max., Thread Speed: 50 FPM Min, 150 FPM Max., Strip Gauge: 0.008" Min, 0.072" Max., Strip Width: 30" Min, 60" Max., Coil Weight: 50,000 lbs. ...more

Product : The Voorwood L79 End Finisher is designed to precisely cut MDF mouldings to length, then sand both ends. Next, to complete the one-pass process, an applicator wheel with automatic heat control applies the transfer finish. A louver end foiler is a production-oriented machine designed for reliability and ...more

Mill Manufacturer - MESTA, Modernized in 1998 by I2S, Typical Products - Carbon Steel, 2 mm to.15 mm up to 1422 mm wid,.080 to.006" thickness up to 56" wide, Roll Size: 762 mm (30"), Max 30" Min 28", Roll Face: 1575 mm (62"), Coil ID: 570/600 mm (22.5/24"), Coil OD Max: 1676 mm (66"), Coil Weight: 20 tons, Mill ...more

used temcon automatic re-winder and perforator machine, model trw 200. industrial-grade converting system designed for high-efficiency roll slitting and rewinding applications. min. 900 mm to max. 1200 mm roll dimensions. (9) knives, 3.75" cap shaft dimension (mother roll), max. 195 m/min capacity-speed, product ...more

Make: EMT International, Model: RF UWSCR20, Year: 2017, Machine Location: Illinois, 2017 EMT RF UWSCR20 Tight Web Unwinder/Rewinder built for high-speed roll-to-roll web handling with tight tension control, splice capability, and dependable performance for digital print and finishing environments., Year: 2017, Make: ...more

42 Redex laminator. 2-ply thermal lamination system. Age 1999. Model Thermo Lam 3. MAP Systems Model LCP-10, serial # 701022, age 1999. MAP Systems Model LAM-42, serial # 651004, age 1999. 300 feet per minute. Was laminating films through heat & pressure. Includes (2) pillar treaters for treating the two webs ...more

8-unit Diddie VIP UV web offset press with 20.5" web width, interchangeable cylinders, full GEW UV on all units, 14"/17"/22"/23" sheeter with stacker, fan-folder, GEC rewinder, BST web guide, KTI rollstand, CC1 register, Visionary controls, and magnetic/cross-perf tooling., Diddie VIP 8-Unit UV Web Offset Press ...more

MAKOR Q-ONE - Feed Through Spray Machine. -- The Q-ONE Sprayer. Single Arm Reciprocating System with: Paper belt overspray collection; it combines: Productivity, flexibility, and quick changeover with a limited investment. -- This continuous belt Conveyor System, combined with disposable paper promotes: ...more

Tronics, Model S1000, pressure sensitive, modular design, roll up to conveyor, spot or wrap labeler. Rated from 197" to 2,400" per minute with number of product – depending on materials, application and machine configuration. Label size range: 0.56" to 8" in Height; 0.78" to 36"in ...more

2" DRAIN VALVE INSTALED IN SUMP, 50 X 1 MANUAL REWIND HOSE REEL, AID, COLD WEATHER STARTING, ANTI-SIPHON ALT LOCATION REAR, ANTIFREEZE, -36C (-33F), AUTO LUBE KIT FOR WATER PUMP, CAB, STANDARD, CHASSIS, STANDARD (NO BODY), EQUIPMENT LOADING FEE, EXHAUST, STANDARD, FACTORY INSTALL, FENDER COVER, FILLER, FAST FUEL, FILM ...more

108" WIDE MAFLEX HESTIA MODEL SA-502 INDUTRIAL ROLL REWINDER, MFG 2009, (2) MAFLEX MODEL UF180 BELT DRIVEN UNWIND STANDS 71" MAXIMUM ROLL DIAMETER 108" WIDTH, (2) RUBBER TO STEEL EMBOSSING UNITS, (1) PLYBONDING UNIT, PERFORATION ROLL, MAFLEX HESTIA REWINDER LOG DIAMTER 4.72"/120mm-15.74"/400mm, CORE DIAMETER RANGE ...more

904171.025 PF Perini Model 606, Series 110, 2-lane logsaw with circular blade for toilet roll and / or kitchen rolls. Was cutting towel rolls most recently. Set up on 7.85 cut length. With existing clamps in machine, roll diameter 110/120mm or 4.4 4.8 diameter. By changing the clamps, other diameters could be cut on ...more

Aesus Model Delta, automatic, single or dual side servo driven, stainless steel, empty pre-made pouch labeling system with number of labels per minute – depending on materials, application and label applicator. dual pouch elevators both have 24" long x 3-1/4" wide vertical pouch transfer belts with ...more

s, The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. And, Unwinder, A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels., Rollers and Alignment, Aluminum rollers enhance durability and lightness. An ...more

156" (3.92M) TRIM FOURDRINIER PAPER MACHINE 2,200 FPM, MacFab S/S Air Pad HeadBox (2013) With Honeywell Model ProFlow II Position Automatic Profile, 50 - 235 GSM, Dilution System installed New in 2013., Cantilevered Fourdrinier S/S Table with (11) Suction Boxes, Suction Couch Roll 194" Face, Dandy Roll, 1st Press ...more

2001 Muller Martini Alprinta A74 8-unit UV web offset press, 29" wide with variable cutoff (22" & 25.5"), IST UV, KTI splicer, BST web guiding, VITS sheeter & folding, GEC TW5050 turret rewinder, AVT/GMI color & register control, print inserts, and full inline finishing s., 2001 Muller Martini Alprinta ...more

Used Jagenberg unwind stand, 70" (1,778 mm) width. Rated for rolls up to 60" (1,524 mm) outer diameter. dual 22" (559 mm) disc brakes. s individual motorized functions for up, down, in, and out adjustment. Machine Type E15. Serial number E87.01116., JAGENBERG E15.

904098.026.

72" Wide Marquip Dual Position Unwind Stand with Splicer, 72" Diameters, Removed from service.

904537.025, Used Lembo unwind stand, 60" wide, 50" diameter. 3" air shaft. Fife guide..

90" Wide Beloit Turret Unwind, Max diameter: 72", Splicing unit including, Recently removed from service, Was running with printing press, 30000.00.

44" Wide Mercury Turret Unwind, 84" Diameters, Needs brakes.

72" Wide Black Clawson Roll Splitter, 48" Diameters.

58" Wide Comexi Turret Unwind, 32" Max diameter, With splicing, Speed: Last run at appx 1100fpm, Matching rewind also available upon request.

One (1) Used FEEC Shaftless floor pick up unwind No edge guide 60" wide rolls 60" diameter rolls, 60.0 in.

72" Black Clawson roll splitter with hydraulic power pack., 84" Diameter capacity roll diameter., Good overall condition., Recently out of service due to paper mill closure..

Used Rowe Paper Winder, -Model: PW-60, -60" Long Winding Shaft, -1/2 HP Leeson AC Motor, Belt Drive, 1725 RPM, 115/208-230 V, 1 PH., -Needs Repair, -In Storage..

904118 Three (3) 134" (3400mm) Toschi belt driven unwinds capable of handling 72" OD rolls. Independent motor driven stands with belt drive. MFG 1998. Last ran tissue grades. Units are set up to handle reel spools off of paper machine. Installed and available due to complete plant closure..