1 / 10
Click to zoom in
1 / 10
For Sale by D & H Machinery Inc
Surplus Record Dealer Since 1963
Location: Toledo, OH
Contact Sales
Phone Number: 419...> Show Phone Number 419-841-3586
Let the seller know you found their listing on Surplus Record!
Description
64.75" x 50,000# Pro Eco Tension Level / Slitting Line
-Materials: Aluminum Alloys
-Incoming Coil Sizes:
Coil Outside Diameter: 36" Min - 103" Max.
Coil Weight: 50,000 lbs. Max.
Coil Width Before Slit: 29" Min. - 64.750" Max.
Coil Width After Slit: 28" Min. - 62.50" Max.
-Width Tolerances:
1/2 Comm Tolerance (+/-) Std Capability)
Over 24" thru 48" (0.02344")
Over 48" thru 60" (0.03125")
Over 60" (0.06250")
-Gauge Range: 0.006" - 0.063"
-Slitting Capacity:
Single Slit Width: 28" Min. - 62.50" Max.
Single Slit Gauge Range: 0.006" Min. - 0.063" Max.
-Side Trim Width Capability: 0.50" Min. - 2.25" Max.
-Mandrel Size:
Payoff I.D.: 16" + 1.25" / - 2.00"
20/24" + 0.5" / - 5.5"
Rewind I.D.: 16" + 0.0 / -0.75"
20/24" +/- 0.5"
-Line Speed: 0 - 2,000 FPM
-Tension Capabilities: 1% elongation on 58,000 psi yield at maximum
width of 62.5" and minimum gauge of 0.006"
-Line Direction: Right to Left
-Line is Installed
Get Your Price from D & H Machinery Inc!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
60" x 0.196" Guida, Slitting Line, w/ Tooling Robot, 55,000 lb., 20"/24" ID, 72" outside dimension, 1995
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Year: 1995
This used Guida Slitting Line offers robust capabilities for metal sheet processing, handling materials with a minimum thickness of.012” and a maximum thickness of.236”. It accommodates strip widths from 16” to 61.02”, and is capable of slitting down to a minimum width of 1.18”. The ...more
60" x 0.135" Cincinnati Herr Voss, Slitting Line, 50,000 lb., 16-24" ID, 72" outside dimension, 1600 FPM, LR
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Herr Voss
Make: Cincinnati - Herr Voss, Material Width: 12" - 60", Material Thickness:.010" -.135", Coil Weight: 50,000Lb, Coil ID: 16" - 24", Coil OD: 72", Speed: 1600 feet per minute, Direction: L-R, Entry Pit Type Coil Car, Powered Lift and Traverse, Double Mandrel Uncoiler, Powered Hold Down Roll, Sliding Base, Motorized ...more
60" x .135" Cincinnati / Herr Voss slitting line, 50000 lb., L to R
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Cincinnati
, MANUFACTURER: CINCINNATI/HERR-VOSS, WIDTH: 60", GAUGE RANGE:.011"-.135", WEIGHT CAPACITY: 50,000 LB., LINE DIRECTION: LEFT TO RIGHT, IMPROVEMENTS:, A HERR-VOSS STRAND EXTENSIONER WAS ADDED IN 2003, A SKY-LOOP IN 2010, THE ENTRY-TABLE & RECOILER WERE REPLACED IN 2015, LINE INCLUDES:, ENTRY COIL RAMP, CONE ...more
60" x .010 - .135" Herr Voss, Coil Slitting Line, 50000 lb., 570-1920 FPM
Category: Slitting Lines
Seller: MachineCo
Location: Montreal, QC
Mfr: Herr Voss
“This line is well maintained and operating daily., Come inspect it under power.”, Coil Slitting Line (USA) Herr -Voss & Cincinnati (rated: hot & cold rolled & galvanized steel ), s, Capacity (width). 60 inchMaximum Weight. 50,000 lbInput Uncoiler is cone type, driven by dual 40 HP motors ...more
Featured
62" x .135" B & K, 50000 lb., 20" & 24" ID at recoiler
Category: Slitting Lines
Seller: American Steel Products Co
Location: Toledo, OH
Mfr: B & K
