D & H Machinery Inc
723 Phillips Ave. Bldg D2
Toledo, OH 43612
Toledo, OH 43612
Platinum Level Dealer
Surplus Record Dealer Since 1963
Contact
About
D & H Machinery, Inc. - Specialists in New & Used Coil Processing Equipment, full service, providing Steel Processing Equipment to your requirements and shipped to any part of the world.D & H's inventory includes Used Slitting Lines, Used Cut to Length Lines, Uncoilers, Recoilers, Rollforming Lines, Banding Lines, Used Precision Levelers, Edging Lines and all types of Metal Coil Processing Equipment. We also sell Coil Handling Equipment such as Coil Cars, Turnstiles, C-Hooks, Sheet Lifters, Upenders (Tippers), etc.
Our Fabricating Division buys and sells Presses, Shears, Saws, Press Brakes, Cutoff Presses, etc.
D & H Machinery Inc. is a Surplus Record Gold Level Dealer:
1. Stocking dealers with real inventories they own or control.
2. Have met Surplus Record's standards for ethical dealings with their customers since 1960's.
3. Have been visited in-person by Surplus Record staff every year.
4. Enjoy nearly 60 years listing with Surplus Record without unresolved complaint or incident.
Products & Services
- Brakes, Press
- Coil Handling/Processing Equipment
- Cut to Length Lines
- Plant Liquidations
- Presses
- Rebuilding/Retrofitting
- Rollformers
- Rolling Mills
- Shears
- Slitting Lines
Associations & Affiliations
483 listings in 118 categories
2 High and 4 High Rolling Mills
1 Result
Fenn #4-053-C Series 5, combination 4 Hi-2 Hi mill, 7.5" roll face, 1.625" work roll
D & H Machinery Inc | Toledo, OH | Sales |
Category: 2 High and 4 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Fenn
Fenn Combination 4 HI - 2 HI Mill, Model: 4-053-C, Series: 5, Roll Face: 7.5" Wide, Work Roll: 1.625" Dia., Backup Roll: 5.250" Dia., Backup Roll Journal: 3.375" Dia., Housing Post ...more
8" x 6" Fenn #083, 2 Hi 1 stand rolling mill, 6.5" roll face, w/uncoiler, straigthener
D & H Machinery Inc | Toledo, OH | Sales |
Category: 2 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Fenn
Fenn 2 HI Rolling Mill Line, Consisting of:, Durant Double-End Uncoiler:, Model DDSC-1, SN:11122, 10" wide stock width max, 6" to 24" Coil I.D. Range, Manual expansion, 600 LB. Coil Weight ...more
9" x 10" 2 Hi 1 Stand rolling mill, manual roll adjustment, push button controls, 20 HP
D & H Machinery Inc | Toledo, OH | Sales |
Category: 2 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
-2 HI Mill:, 10.5" W x 9" Dia. Work Rolls, Manual Roll Adjustment, Forced Water Cooled Rolls, Both Rolls Driven, Manual Outboard, 43" Passline, 5" x 7" Mill Housing, Pushbutton Controls, 20 ...more
13" x 20" Mannesmann Demag Skin Pass Mill, 2 Hi 1 Stand, 1990 / 1991 / 1993 / 1994
D & H Machinery Inc | Toledo, OH | Sales |
Category: 2 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Mannesmann
Year: 1994
Year of Construction: 1990 / 1991 / 1993 / 1994, Type: 2 HI, Roll Diameter: Max. 330 mm, Min. 300 mm, Roll Length: 500 mm, Material Data:, Band Thickness Max.: 4,00 mm, Band Thickness Min.: ...more
3" x 10.5" x 10.5" Ruesch #210, 4 HI Rolling Mill, 430-1200 FPM
D & H Machinery Inc | Toledo, OH | Sales |
Category: 4 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch 4 HI Rolling Mill, Model: 210, Roll Face: 10.5", Work Roll Diameter: 3", Backup Roll Diameter: 10.5", Mill Housing Post Size: 7" x 8.50", Mill Speed: 430 - 1200 FPM, Main Drive ...more
5" x 16" x 16" Ruesch, reversing rolling mill, 4 HI, 1 Stand, 400 FPM, 1991
D & H Machinery Inc | Toledo, OH | Sales |
Category: 4 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Year: 1991
-Year: 1991 & 2019 (Upgrade), -Raw Material: Cu (able to Steel, Stainless Steel), -Thickness: 0.125" - 0.005" x 14" (3,2mm - 0,5mm x 350mm), -Weight: Max. 2,500 kg/Coil, -Mill Type: 4 ...more
.25" x 6" x 6" Waterbury-Farrel, cold mill, 6000 lb., uncoiler, manual expansion, 4 keepers, 16"-20" expansion
D & H Machinery Inc | Toledo, OH | Sales |
Category: 4 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Waterbury-Farrel
Material Width: 6" Max., Material Thickness: 0.250" Max., Line Direction: Right to Left, Consisting of the following:, -Uncoiler: Egan, Model M601-24, 6,000# x 24" Capacity, 16" - 20" ...more
D & H Machinery Inc has 1 more listing in 4 High Rolling Mills.
50 Hz Three Phase Transformers
1 Result
145 KVA 380 Primary, 460Y/266 Secondary, hevi-Duty transformer
D & H Machinery Inc | Toledo, OH | Sales |
Category: 50 Hz Three Phase Transformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Hevi-Duty
Purpose, 3 Phase Transformer, Capacity: 145 KVA, HV: 380 V, LV: 460Y / 266, HZ: 50, % Imp: 5.34% at 150 Deg. C, Total Weight: 1,300 lbs., Catalog Number: DT1361H145, In Storage: Toledo, OH..
Air Conditioning and Water Chiller Equipment
1 Result
Kooltronic #KA4C6NP36R, air conditioner, 6000 Btu, R134A, 15 oz., 150/350 psig
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Kooltronic
Model: KA4C6NP36R
-Model: KA4C6NP36R, -Volts: 115, 60 Hz, 1 PH, Cooling FLA: 16.5, -Volts: 100, 50 Hz, 1 PH, Cooling FLA: 17.0, -Cooling BTU: 6000, -Refrigerant: R134A, 15 Oz., -Ambient Temp: 50-125 Degrees ...more
72" x .135" Red Bud #FMP9HD-60-72, Grip Feeder, 60" Wide, Cylinder Type Deceleration, Hydraulic Gripper
D & H Machinery Inc | Toledo, OH | Sales |
Category: Air Feeders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Red Bud
Red Bud Grip Feeder, -60" x 0.105" Capacity, -Model No: FMB 9HD-60-72, -72" Stroke Length Max., -Cylinder Type Deceleration, -Cam Follower Material Guides, -Hydraulic Gripper, -Overall ...more
72" x .135" Red Bud #FMP9HD-60-72, Grip Feeder, 60" Wide
D & H Machinery Inc | Toledo, OH | Sales |
Category: Air Feeders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Red Bud
Red Bud Grip Feeder, -60" x 0.135" Capacity, -Model FMP 9HD-60-72, -72" Stroke Length Max., -Cylinder Type Deceleration, -Cam Follower Material Guides, -Hydraulic Gripper, -Overall Size: ...more
Alligator Shears
1 Result
72" x 0.250" Braner, scrap choppers, 10 HP motor, 1997
D & H Machinery Inc | Toledo, OH | Sales |
Category: Alligator Shears
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Braner
Year: 1997
Braner Scrap Choppers, -Designed for use in 72" Wide Slitting Line, -Capacity: 0.015" - 0.048" Thick with existing 10 HP Drive Motor, -Previously used on 0.075" Thick x 0.500" wide material ...more
3" x 3" x 1/4" Williams, angle & bar shear, 480 V., foot pedal, air cooled
D & H Machinery Inc | Toledo, OH | Sales |
Category: Angle and Bar Shears
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Williams
Williams & White Angle & Bar Shear, Number 14 Angle Shear, -Tonnage: 100, -Capacity: 3" x 3", -Max. Thickness: 0.250", -Stroke: 1.750", -Air Clutch, -Volts: 480, -Foot Pedal, -Palm ...more
8' Dreis & Krump, hand brake
D & H Machinery Inc | Toledo, OH | Sales |
Category: Apron and Hand Brakes
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dreis & Krump
Dreis & Krump Hand Brake, -Capacity: 8 ft., -Overall Size: 129" L x 42" W x 60" High, -In Storage: Toledo, OH.
Banding Lines and Coil Packaging Lines
9 Results
6000 lb. Signode, banding head & table, 60" OD, 1-1/4" W strapping, powered conveyor top
D & H Machinery Inc | Toledo, OH | Sales |
Category: Banding Lines and Coil Packaging Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Signode
-6,000 LBS. CAPACITY, -60" DIAMETER CAPACITY, -SIGNODE M20-SV SEMI-AUTO HEAD, -1 1/4" STRAPPING WIDTH, -POWERED CONVEYOR TOP, -2 CONICAL ROLLS FOR COIL ROTATION, -IN STORAGE; TOLEDO, OHIO.
6000 lb. Signode, banding head & table, 48" outside dimension, 4.5" diameter driven conveyor rolls, 3 HP
D & H Machinery Inc | Toledo, OH | Sales |
Category: Banding Lines and Coil Packaging Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Signode
Signode Banding Head & Table, -6,000# x 48" O.D. Capacity, -Signode M20SV Banding Head, 3 HP AC Motor, 230/460 V, -4.5" Dia. Driven Conveyor Rolls, -2 Tapered Turning Rolls, -35" ...more
10000 lb. Amca, banding head & table, 72" OD, 3 conical rolls, 3.5" diameter x 94" face powerd conveyor rolls, 1997
D & H Machinery Inc | Toledo, OH | Sales |
Category: Banding Lines and Coil Packaging Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Amca
Year: 1997
-10,000# x 72" O.D. Capacity, -94" Face x 3.5" Dia. Powered Conveyor Rolls, Driven by AC Motor thru Reducer, -3 Conical Rolls for Coil Rotation, Each Roll individually driven by 0.75 KW AC ...more
D & H Machinery Inc has 6 more listings in Banding Lines and Coil Packaging Lines.
Iemca #Master-865-12MP, 12' bar loader, Master 865-12 MP2008
D & H Machinery Inc | Toledo, OH | Sales |
Category: Bar Feeders and Loaders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Iemca
Model: MASTER-865-12MP
Magazine Type Bar Loader, Model: Master 865-12 MP, Capacity: 12', Control: CNC.
1.25" Oak #RECB-M3-160-9-99, return elbow crossover bender
D & H Machinery Inc | Toledo, OH | Sales |
Category: Bar, Pipe and Tube Benders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: RECB-M3-160-9-99
Oak Return Elbow Crossover Bender, Model: RECB-M3-160-9-99, -Makes Return Bends and Elbow Bends (90 Degrees or less), This Hydraulic powered machine can produce return bends, crossover ...more
No. C8-HS MSI Chamfermate, 3.5" dia., heavy duty, hydraulic powered pipe beveler
D & H Machinery Inc | Toledo, OH | Sales |
Category: Beveling Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Msi Chamfermate
Model: C8-HS
MSI Pipe Beveling Machine, The Model C8H Chamfermate is a heavy duty hydraulic powered pipe beveling, machine with up to 5.0" O.D. Capacity. With 15 HP, the C8H has the power, to machine ...more
8000 lb. Heppenstall C-hook, 13" Wide Coils, 26" vertical throat clearance
D & H Machinery Inc | Toledo, OH | Sales |
Category: C-hooks
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Heppenstall
Heppenstall C-Hook, -8,000 LB. Capacity, -13.5" Long Arm, -26" Vertical Throat Clearance, -1.25" Thick Frame, -In Storage: Toledo, OH.
10000 lb. Bushman, c-hook, 60" W, 60" arm, 24" throat, 1979
D & H Machinery Inc | Toledo, OH | Sales |
Category: C-hooks
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Bushman
Year: 1979
Bushman 5 Ton C-Hook, Model 624, -Capacity: 10,000 lb. x 60" Wide Coils, -Arm Length: 60", -Throat Height: 24", -Shipping Weight: 1225 lbs., -In Storage: Toledo, OH.
10000 lb. C-Hook, 16.5" long arm, 30" vertical throat, 1.75" thick frame, parking stand
D & H Machinery Inc | Toledo, OH | Sales |
Category: C-hooks
Seller: D & H Machinery Inc
Location: Toledo, OH
10,000# x 16" C-Hook, -16.5" Long Arm, -30" Vertical Throat, -1.75" Thick Frame, -With Parking Stand, -Overall Size: C-Hook; 27.5" L x 1.75" W x 52" High, Stand; 32.5" L x 18.5" W x 55" ...more
D & H Machinery Inc has 14 more listings in C-hooks.
Carbide, Friction and Cold Saws
2 Results
4" Amada #CM-100-AN, circular cold saw, 14.2" x 1.57" x .10" blade, 2000
D & H Machinery Inc | Toledo, OH | Sales |
Category: Carbide, Friction and Cold Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Amada
Model: CM-100-AN
Year: 2000
Amada 4" Round Circular Cold Saw, Year: 2000, -Model: CM 100-AN, -Serial Number: 10500029, -Rounds Cutting Capacity: 0.79" - 4.0" Dia., -Rectangle Cutting Capacity: 0.79" x 0.79" - 3.14" x ...more
Haberle #H-350H, cold saw, (2) bases, clamping wheels
D & H Machinery Inc | Toledo, OH | Sales |
Category: Carbide, Friction and Cold Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Haberle
Model: H-350H
Haberle Cold Saws, -Model: H 350-H Series D Semi-Automatic, -Capacity: at 90 Degree Round Tube 4.7", Round Solid: 2.4", Square Tube: 4.1", Rectangle: 6" x 3", -Capacity: at 45 Degree Round ...more
Chain Hoists, Monorail and Trolley Cranes
1 Result
30 Ton, Zenar, crane trolly, 60' lift, 100 HP, spare hoist motor, many spare parts, 1988
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Zenar
Year: 1988
-60,000# (30 Ton) Capacity, -60' Lift, -60 Ft./Min. Lift Cycle, -112.25" center to center spacing on Wheels, -100 HP Hoist Motor, 1200 RPM, 480 V, Rebuilt in 2007, -Spare Hoist Motor ...more
Behringer #VMS-370A, automatic vertical circular cold saw, 14.5" x 0.118" x 1.57" blade, 2015
D & H Machinery Inc | Toledo, OH | Sales |
Category: Circular Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Behringer
Model: VMS-370A
Year: 2015
Behringer Circular Cold Saw, -Model: VMS 370A Auto Feed, -Miter Range: 45 Left and 60 Right: 45-90-45-60 Degrees, -Capacity Round: 0.39" to 5.1" (10 to 130mm) at 90 Degrees, -Capacity ...more
CNC Beam/Drill Lines
2 Results
Peddinghaus #FDB-2500, drill line, 40" passline, 2005
D & H Machinery Inc | Toledo, OH | Sales |
Category: CNC Beam/Drill Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Peddinghaus
Model: FDB-2500
Year: 2005
Model: FDB 2500, Plate Width: 6" - 96", Plate Thickness: 0.250" - 3", Length Piece: 36" - 240", Minimum Plate Drop Off: 10" (Trailing Edge), Passline: 40", Weight Capacity: 20,125 lbs. ...more
Peddinghaus #TDK-1000/3CHD, 1 spindle beam drilling system, 63" beam length, 4-Axis Control, servo drive
D & H Machinery Inc | Toledo, OH | Sales |
Category: CNC Beam/Drill Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Peddinghaus
Model: TDK-1000/3CHD
Peddinghouse Single Spindle Beam Drilling System, with 4 Axis CNC Control and Servo Drive., Model Number: TDK-1000/3 CHD, -Min. Beam Length: 63", -Max. Width: 40", -Max. Height: 24", -Max. ...more
CNC Cylindrical Grinders
1 Result
25" x 135" Herkules #WS450-8Lx3500, CNC cylindrical grinder, 30" x 3" x 8" wheel, 1997
D & H Machinery Inc | Toledo, OH | Sales |
Category: CNC Cylindrical Grinders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herkules
Model: WS450-8LX3500
Year: 1997
Herkules WS 450-8L x 3500 CNC Cylindrical Grinder, Machine just out of service from Major Aerospace Facility., Grinding Diameter: 25", Maximum Swing: 48", Center Distance: 135", Weights of ...more
CNC Turret Punch Press Machine
1 Result
50 Ton, Amada, turret punch, 58 station, 4 automatic index, 52" throat, 50" x 157" sheet, Fanuc 18P, 2003
D & H Machinery Inc | Toledo, OH | Sales |
Category: CNC Turret Punch Press Machine
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Amada
Year: 2003
-Tonnage: 50 Ton, -# Turret Stations: 58 Station, -Control: CNC (4 Axis), -Weight: 38,000 lbs., -Table Travel: 50" x 78", -Throat Depth: 52", -Max. Sheet Size: 50" x 157", -Max. Ram of ...more
12000 lb. Rowe #BGY-12, coil car, 60" W, hand pendant Control
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Cars
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rowe
Model: BGY-12
Rowe Coil Car, Model BGY-12, -Capacity: 12,000# x 60" Wide, -44" Wide Bed, -Approx. 19" from Floor to bottom of "V" Cradle, -Electric Motor operated Lift and Travel, -Hand Pendant Control ...more
15000 lb. Revolvator #15M, coil car, 60" width, 54" outside dimension, 48" bed width, self contained hydraulic
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Cars
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Revolvator
Model: 15M
Revolvator Coil Car, -Model: 15M, -Capacity: 15,000# x 60" Wide, -Coil O.D.: 54" Max., -Bed Width: 48", -Self Contained Hydraulics, 3 HP AC Motor, 17409 RPM, 208/230 V, -Approx. 5" Bore ...more
20000 lb. Herr, coil car, L type, 60" width, 60" outside dimension, 20" lift, self contained hydraulic, 3 HP
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Cars
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr
-Capacity: 20,000# x 60" Wide, -L Type, -51" Bed Width, -31" from back plate to center of "V", -60" Coil O.D., -20" Approx. Lift, -48" Wide x 7" High removeable Riser Plate for smaller O.D. ...more
D & H Machinery Inc has 14 more listings in Coil Cars.
Coil Cradles and Straighteners
2 Results
5000 lb. Littell #412-CC40, coil cradle & straightener, 12" x .125" capacity, 48" O.D., 12-70 FPM
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Cradles and Straighteners
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Littell
Model: 412-CC40
Littell Combination Coil Cradle & Straightener, -Model: 412-CC40, -Capacity: 12" Wide x 0.125", -Coil Weight: 5,000 lbs. Max., -Coil O.D.: 48" Max., -Straightener Rolls: Approx. 3.125" ...more
5000 lb. Custom, 18" coil cradle, 3.25" diameter x 18.5" face width, driven feed rolls
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Cradles and Straighteners
Seller: D & H Machinery Inc
Location: Toledo, OH
-Width Capacity: 18" Max., -5,000 lb. Capacity, -Driven Feed Rolls, 3.25" Dia. x 18.5" Face Width, -Overall Size: 188" L x 42" W x 106" High, 5,200 Lbs., -In Storage: Rockford, IL.
60" x 0.25" Lee Shaffer, coil end joiner, 64" long welding platen, clamp station, 1993
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil End Joiners
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Lee
Year: 1993
-Capacity: 60" x 0.250", -Welding Platen: 64" Long, -Weld Clamp Station with Dual Weld Clamp Pads, -Weld Carriage Rides on Precision Screw Shaft, driven by Vari-Speed DC Motor., -Exit ...more
66" Behlen Stitcher #WRSJ-66, 66" wide, 1969
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil End Joiners
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Behlen
Model: WRSJ-66
Year: 1969
Behlen Stitcher, Model: WRSJ - 66, -Strip Width:, Max. Joining Width: 66" (1524mm), Max. Strip Clearance between Posts: 70" (1651mm), -Strip Thickness:, (Current owner's use, not full ...more
Coil Handling - Miscellaneous
3 Results
Strand Extensioner, Herr Voss #VSEB 36/1.156-17/5-4HI right hand, 24" wide, R to L, 1000 FPM, 1998
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Handling - Miscellaneous
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Model: STRAND EXTENSIONER
Year: 1998
Model: VSEB 36/1.156-17/5-4HI RH, Materials: Stainless Steel, Max. Width: 24", Thickness Range: 0.008" - 0.035" @ 50,000 PSI Yield, Thickness Range: 0.012" - 0.035" @ 75,000 PSI Yield ...more
Strand Extensioner, Herr Voss #72/1.156-23/5 HI / right hand, 62.5" W, 23, roll 11 over 12
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Handling - Miscellaneous
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Model: STRAND EXTENSIONER
Herr Voss Strand Extensioner 5 HI, -Model: 72/1.156-23/5 HI / RH, -Width Capacity: 62.5" Max., -23 Roll design, 11 over 12, -Minimum Coil Thickness: 0.008", -Maximum Coil Thickness: 0.040" ...more
Strand Extensioner, Herr Voss, 50" x 0.187", 23 rolls, 2.187" dia rolls, 60" roll face
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Handling - Miscellaneous
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Model: STRAND EXTENSIONER
50" x 0.187" Herr Voss Strand Extensioner, -23 Work Rolls, 11 over 12, -Currently running 19 Rolls, 9 over 10, -2.187" Diameter Rolls, -60" Roll Face, -50" Wide Material Capacity, -0.060" ...more
4000 lb. Cady #F442, pallet lifter, 42" long forks, 40" inside to inside forks, 4" width forks, 1989
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Lifters/Tongs
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cady
Model: F442
Year: 1989
-Model: F442, -4,000 Lbs. Capacity, -42" Long Forks, -40" Inside to inside forks, -4" Wide Forks, -Shipping Weight: 712 Lbs., -In Storage: Toledo, OH.
25000 lb. Cady #A2572, pallet lifter, 59" forks, adjustable fork positions, 48" wide max., 1991
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Lifters/Tongs
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cady
Model: A2572
Year: 1991
Cady Pallet Lifter, -Model: A2572, -Capacity: 25,000 lbs., -59" Long Forks, -Size of Forks: 3" Thick x 12" Wide, -Adjustable Fork Positions, Opens to 48" wide max., -Approx. Shipping ...more
40000 lb. Heppenstall, automatic vertical coil tong, 16"-24" ID
D & H Machinery Inc | Toledo, OH | Sales |
Category: Coil Lifters/Tongs
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Heppenstall
Heppenstall Automatic Vertical Coil Tong, -Capacity: 40,000 lbs., -Coil ID range: 16" to 24", -Coil wall max:, -Vertical Rim Type Grab, -Includes Parking Stand, -In Storage: Toledo, OH.
D & H Machinery Inc has 1 more listing in Coil Lifters/Tongs.
21"/53" x 60" Continental, tandem cold rolling mill, 4 Hi 4 Stand, 30"-53" width, 50"-72" OD, 24" ID
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cold Roll Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Continental
Continental 4 Hi 4 Stand Tandem Cold Mill, 21" and 53" x 60" Face, Material grades available on request, Entry Gauges / Thickness: 0.050" - 0.180" Max. (1.3 - 4.6 mm), Exit Gauges / ...more
22" x 40" Lewis non reversing cold mill, 2 Hi 1 stand, payoff reel, coil car, 1950
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cold Roll Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Lewis
Year: 1950
22" x 40" Non-Reversing Cold Mill, Coil Weight: 30,000 lbs. (13,500kgs), Mill Speed: 309 to 618 FPM (90 to 190 MPM), Post Size: 13" x 15.50" (330mm x 340mm), Window Dimension: 2' Wide x ...more
Schumag, drawing machine, 2006
D & H Machinery Inc | Toledo, OH | Sales |
Category: Combined Drawing Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Schumag
Year: 2006
Manufacturing Year: 2006, Aluminum Bar: 22mm - 60mm, Line Speed: 10~40m/min, Cutting Length: 2000~5000mm, -Drawing Machine:, Line max. speed: 40m/min, Motor rated speed: 750rpm(40m/min/ ...more
Conveyor Continuous / Spinner Hanger, Blast Cleaning and Shot Peening
1 Result
Pangborn #ES-1939, monorail shot blasting machine, 1991
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Pangborn
Model: ES-1939
Year: 1991
Pangborn Shot Blast Machine, Model: ES - 1939, -Type of Work: Miscellaneous steel fabrications, excavator booms., -Size Limits: 5' x 7' x 21' Long Minimum, to 35' Maximum ...more
.075" x 36" Famco #P-PC1436, crop shear, 480 V., 3-phase
D & H Machinery Inc | Toledo, OH | Sales |
Category: Crop Shears
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Famco
Model: P-PC1436
Famco Mechanical Shear, For Use In Cut-to-Length Line, -Model: P-PC1436, -Maximum Width: 36", -Maximum Thickness: 14 Gauge (0.075") Mild Steel, -Speed: 300 Strokes/Min., -Air Clutch and ...more
.25" x 54" Loopco, crop shear, 58" long blade, 10" bore hydraulic cylinder, 1974
D & H Machinery Inc | Toledo, OH | Sales |
Category: Crop Shears
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Loopco
Year: 1974
Loopco Crop Shear, -Capacity: 54" x 0.250" (Mild Steel), -58" Long Blade, -Hydra-Mechanical Upcut Type, -10" Bore Hydraulic Cylinder, -Entry Passline Roll, -Spring Loaded Holddown ...more
.25" x 54" Riise, hydraulic crop shear, 3 hydraulic cylinders, 52.5" pass line
D & H Machinery Inc | Toledo, OH | Sales |
Category: Crop Shears
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Riise
Hydraulic Crop Shear, -Capacity: 0.250" x 54", -60" Long Blade, -(3) Hydraulic Cylinders, -52.5" Pass Line (can be reduced to 28.5" by removing base), -Overall Size: 96" L x 34" W x 92" ...more
D & H Machinery Inc has 1 more listing in Crop Shears.
20" AP & T #AKS-500-40, cut-off shear, 40 ton, 1996
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cut Off Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ap & T
Model: AKS-500-40
Year: 1996
Type: AKS-500-40, Shearing Force: 40 Ton (400 kN), Maximum Shearing Width: 20" (500 mm), Approx. Weight: 1,400 lbs., In Storage: Rockford, IL..
12 Ton, Tishken, 2-post cutoff press, 1.5 stroke, 7.75" Shut Height, adj. base, 8.75" between housing, air clutch & brake
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cut-off Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Tishken
-2 Post Cutoff, -Mechanical Flying Cutoff, -12 Ton Capacity, -1.5" Stroke, -7.75" Shut Height, -8.75" Between Posts, -Adjustable Base, -Flying Die, -3 HP AC Motor, 220 / 440 V, -Air Clutch ...more
50 Ton, Tishken, cutoff press, 2 stroke, 8" Shut Height, 96" x24" bed, 8-posts, 10 HP, air clutch & brake
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cut-off Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Tishken
-Mechanical Down Stroke, -50 Ton, -2" Stroke, -8" Shut Height, -96" x 24" Bed, -8 Guide Posts, -14" Between Posts, -Air Clutch and Brake, -10 HP AC Motor, 220/440 V, -Overall Size: 110" L x ...more
60 Ton, Pro-Eco #MCP-60-2-36, cutoff press, 2 stroke, Wichita air clutch
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cut-off Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Pro-Eco
Model: MCP-60-2-36
-Model: MCP-60-2-36, -Serial Number: 3654-8-80, -Capacity: 60 Ton, -37" L-R between Posts, -22" F-B between Posts, -Post Diameter: 3", -16" Ram to Bed with Stroke Up, -2" Stroke (to be ...more
D & H Machinery Inc has 2 more listings in Cut-off Presses.
30" x .09" Rowe, cut to length line, 20000 lb., R to L, coil car, uncoiler, peeler table, straightener, loopong table, roll feeder, shear, stacker, belt conveyor, 1994
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rowe
Year: 1994
-Coil Width: 30", -Coil Weight: 20,000 LBS., -Gauge Range: 0.017" - 0.090", -Sheet Length: 12', -Line Direction: Right to Left, Consisting of the following:, -Coil Car:, Model ...more
32" x .078" Atkin, Cut-To-Length line, 11000 lb., 60" OD, 16"-20" ID, 42" passline, hydraulic power unit, 1996
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Atkin
Year: 1996
Materials: Pre-Painted Steel, Pre-Painted Aluminum, Material Width Range: 6" - 32", Thickness Range: 0.009" - 0.078" @ 70 - 100 FPM (Approx.), Thickness Range: 0.009" - 0.039" @ 140 FPM ...more
36" x .04" Bradbury & Tishken, Cut-To-Length line, 20000 lb., uncoiler, servo roll feed, leveler, hydraulic shear
D & H Machinery Inc | Toledo, OH | Sales |
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Bradbury & Tishken
-Coil Weight: 20,000 lbs., -Coil Width: 36", -Thickness: 0.008" to 0.040", -Line Speed: 100 FPM, Consisting of the following:, -Uncoiler: Rowe, Model: 20030 DS/J, Capacity: 20,000 Lbs. x ...more
D & H Machinery Inc has 12 more listings in Cut-to-length Lines.
DC Motors Electrical, 115-225 Volts
1 Result
100 HP RPM DC Motor
D & H Machinery Inc | Toledo, OH | Sales |
Category: DC Motors Electrical, 115-225 Volts
Seller: D & H Machinery Inc
Location: Toledo, OH
U.S. Electrical Motors DC Motor, -100 HP, -1750/2000 RPM, -500 Volts, -16 Amps, -In Storage: Holland, OH.
DC Motors Electrical, 230-250 Volts
1 Result
30 HP 400/2000 RPM General Electric, stab shunt wound, 240 V
D & H Machinery Inc | Toledo, OH | Sales |
Category: DC Motors Electrical, 230-250 Volts
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: General Electric
-HP: 30, -RPM: 400 / 2000, -Voltage: 240, -Arm Amps: 105, -Stab Shunt Wound, -In Storage: Toledo, OH.
DC Motors Electrical, 255-460 Volts
2 Results
1000 HP 430/1290 RPM GEC Alsthom Largi Machines Ltd., 500 Volts, 1590 Amps., 1991
D & H Machinery Inc | Toledo, OH | Sales |
Category: DC Motors Electrical, 255-460 Volts
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Gec
Year: 1991
1000 HP DC Motor, -GEC Alsthom Largi Machines Ltd., -RPM: 430/1290, -Voltage: 500, -Amps: 1590, -Duty: Cont. H, -Peak Amps: 3975, -Exitator Separate, -Conn's Shunt Compensated, -Encl. ...more
1000 HP 430/1290 RPM GEC Alsthom Largi Machines, 500V., 1590 amps, 1991
D & H Machinery Inc | Toledo, OH | Sales |
Category: DC Motors Electrical, 255-460 Volts
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Gec
Year: 1991
1000 HP DC Motor, -GEC Alsthom Largi Machines Ltd., -RPM: 430 / 1290, -Voltage: 500, -Amps: 1590, -Duty: Cont. H, -Peak Amps: 3975, -Exitator Separate, -Conn's Shunt Compensated, -Encl. ...more
DC Motors Electrical, 475-900 Volts
4 Results
50 HP HP RPM RPM Baldor, Frame 328AT, DPBV, shunt wound, 500 V, 150/300 FV
D & H Machinery Inc | Toledo, OH | Sales |
Category: DC Motors Electrical, 475-900 Volts
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Baldor
-Cat No.: D5050P-BV, -Frame: 328 AT, -HP: 50, -Volts: 500, -Arm Amps: 83.7, -Field Amps: 4-2.6 / 2-1.3, -Field Volts: 150 / 300, -Shunt Wound, -Field Conn: DPBV, -OHMS 25C: 27 / 108, -Insul ...more
75 HP 1750/2100 RPM Cleveland, Frame CD366AT, blower, 500 Volts
D & H Machinery Inc | Toledo, OH | Sales |
Category: DC Motors Electrical, 475-900 Volts
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cleveland
Frame: CD366AT
Electric DC Motor, -75 HP, -1750 / 2100 RPM, -500 V, -With Blower, -Frame: CD 366AT, -In Storage: Toledo, OH.
300 HP 300/1350 RPM General Electric, Frame CD6262, DPFG-SV, 500 VA
D & H Machinery Inc | Toledo, OH | Sales |
Category: DC Motors Electrical, 475-900 Volts
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: General Electric
Frame: CD6262
-300 HP GE DC Motor, -300 / 1350 RPM, -500V, -Type CD 6262, -6" Dia. Drive Shaft, -Passline ("D" Dimension): 21.5", -Overall Size: 84" L x 65" W x 72" High, 12,000 lbs., -In Storage: ...more
D & H Machinery Inc has 1 more listing in DC Motors Electrical, 475-900 Volts.
Grav-I-Flo #GVM-15S, return bend deburr & clean machine
D & H Machinery Inc | Toledo, OH | Sales |
Category: Deburring Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Model: GVM-15S
Grav-I-Flo Return Bend Deburr & Clean Machine, Model: GVM-15S, -In Storage: Toledo, OH.
6000 lb. x 60 outside dimension Braner, downlayer, 3.5" dia x 61" face rolls, in-line discharge
D & H Machinery Inc | Toledo, OH | Sales |
Category: Downlayers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Braner
-6,000 lb. x 60" O.D. Capacity, -In Line Discharge, -3.50" Dia. x 61" Face Rolls with 1" Hex shafts, -Hydraulic Motor Powered Conveyor Rolls, -Approx. 20" Horn Length, -Horn in/out by ...more
6000 lb. x 60 outside dimension Braner, downlayer, 3.5" diameter x 61" face driven conveyor rolls, 2 hydraulic tilt cylinders
D & H Machinery Inc | Toledo, OH | Sales |
Category: Downlayers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Braner
-Capacity: 6,000 lbs. x 60" O.D., -3.5" Dia. x 61" Face Driven Conveyor Rolls, Hydraulic Motor Driven, -In-Line Discharge, -Double Pivot Design, -2 Hydraulic Tilt Cylinders, 4" Bore x 24" ...more
6000 lb. x 60 outside dimension Paxson, pick & place downlayer, 4" dia rolls, right angle discharge
D & H Machinery Inc | Toledo, OH | Sales |
Category: Downlayers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
Paxson Pick and Place Downlayer, -Capacity: 6,000# x 60" O.D., -4" Dia. x 65.5" Face Driven Rolls, -Right Angle Discharge, -Manual Gravity Actuated Horn, -1 Hydraulic Tilt Cylinder ...more
D & H Machinery Inc has 7 more listings in Downlayers.
Netforce One #NF1-03T, drill rig, Kubota Turbo V2403M power unit, hydraulic operation, auger
D & H Machinery Inc | Toledo, OH | Sales |
Category: Drilling Rigs and Equipment
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Netforce One
Model: NF1-03T
-Model: NF1-03T, Power Unit: Kubota Turbo V2403M, Power Rating: 44KW (59 HP) @ 2700 RPM, Battery: 12 Volts DC, Dimensions (Transport):, Track Width: 1.33 m (52.375"), Track Width ...more
Dust Collectors
1 Result
120 cfm BHA, dust system, bag house, 4.15:1 air to cloth, 1990
D & H Machinery Inc | Toledo, OH | Sales |
Category: Dust Collectors
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Bha
Year: 1990
Year of Project: 1990, MFR Industrial Controls (Electrical), Bag house approximately: 120 CFM., Filter Area: 28,907 sq. ft., Air to Cloth Ratio: 4.15 to 1, Temperature Operating: Less than ...more
Cauffiel, edging stand, 12" x .250" capacity, 3 sets of edging dies, V grooves in dies
D & H Machinery Inc | Toledo, OH | Sales |
Category: Edgers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cauffiel
-Capacity: 12" W x 0.250" Thick (estimated), -3 "Sets" of Edging Dies (6 Dies total), with "V" Grooves in Dies., -One side has Hydraulic Motor adjustment., -Opposite side has manual ...more
Custom edging line, 2" x 0.197", L to R, control panel with PLC & speed regulation, 1989
D & H Machinery Inc | Toledo, OH | Sales |
Category: Edgers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Custom
Year: 1989
Thickness: Minimum 2 mm (0.0787"), Thickness: Maximum 5 mm (0.197"), Width: Minimum 10 mm (0.393"), Width: Maximum 50 mm (1.97"), Material: Stainless Steel, Coil O.D.: 1800 mm (70.87") ...more
Rowe, edge trimmer, 60" x .250" capacity, double stub design, powered width adjustment, 42" passline, 1993
D & H Machinery Inc | Toledo, OH | Sales |
Category: Edgers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rowe
Year: 1993
-Capacity: 60" x 0.250", -Double-Stub Design, -64" Max. Width, -Powered Width Adjustment, -Entry Edge Guides on (1) Unit, -Passline: 42", -Less Drive Motors, -Overall Size: 165" L x 58" W x ...more
10" x .2" Cauffiel edging line, L to R, coil lift, uncoiler, Coil to Coil or Coil to Strip, Complete Line
D & H Machinery Inc | Toledo, OH | Sales |
Category: Edging Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cauffiel
-Coil Width: 2" - 10", -Gauge Range: 0.064" - 0.250", -Coil Weight: 10,000 lbs., -Line Direction: Left to Right, -Operation: Coil to Coil or Coil to Strip, Consisting of the following: ...more
Memco #50, embosser, 48" x .060", 50 ton hydraulic pressure, 60" passline rolls
D & H Machinery Inc | Toledo, OH | Sales |
Category: Embossing Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Memco
Model: -50
-Model: 50, -50 Tons Hydraulic Pressure, -Strip Width: 48" Max. (1270 mm), -Strip Thickness: 0.060" Max. Aluminum (Typical), 0.040" Steel (Typical), -Passline Rolls, -Embosser Rolls: 15" ...more
Memco, embosser, 58" W, 60" roll face, 60 HP AC motor, 1782 RPM, 230/460 V., Yaskawa A1000
D & H Machinery Inc | Toledo, OH | Sales |
Category: Embossing Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Memco
Memco Embosser, -58" Wide Capacity, -60" Roll Face, -Seville Pattern, -21" Roll Diameter, -60 HP AC Motor, 1782 RPM, 230/460 V, -SM-Cyclo Reducer w/21:1 ratio, -Yaskawa A1000 Drive ...more
15.5" x 54" LeBlond Makino, servo shift engine lathe, 2.25" hole, 45-1800 RPM, #4MT, digital read out
D & H Machinery Inc | Toledo, OH | Sales |
Category: Engine Lathes
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Leblond
Model: 4MT
Leblond Makino Engine Lathe, 15" Regal Servo Shift, -Swing over Bed and Carriage Wings: 15.5", -Swing over Cross Slide: 9.5", -Distance between Centers: 54", -Spindle Speeds: 12, -Spindle ...more
17" x 120" Clausing engine lathe, geared head, inch/metric, 3 & 4-jaw chuck, tailstock
D & H Machinery Inc | Toledo, OH | Sales |
Category: Engine Lathes
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Clausing
Clausing Colchester Engine Lathe, -17" Swing x 120" Centers, -Geared Head, -20 to 1600 RPM, -3" Dia. Spindle Hole, -Inch and Metric, -Threading Dial, -Tailstock, -Chuck Guard, -3 Point ...more
Oak #CSE-M590-950, vertical expander, 2004
D & H Machinery Inc | Toledo, OH | Sales |
Category: Expanders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: CSE-M590-950
Year: 2004
Oak Vertical Expander, Model: CSE-M590-950, Capacity: 108" Max. Coil between End Plates, 48" Min. Coil between End Plates, 50" Max. Fin Length, Pattern: 0.375" - 1.000" x 0.866" Staggered ...more
620 Ton, Herlan #P-9, extrusion press, 17.3" stroke, 50 HP, 1967
D & H Machinery Inc | Toledo, OH | Sales |
Category: Extrusion Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herlan
Model: P-9
Year: 1967
Herlan Extrusion Press, -Model: P9, -Upgrades: Replaced Air Clutch and Brake (2006), Rebuilt Ram Ways, Added Ejector Safety Equipment, -Nominal Power:, 620 Metric Tons, -Stroke Length:, 440 ...more
4200 Ton, Southwark, extrustion press, PLC SLC 500, 1960
D & H Machinery Inc | Toledo, OH | Sales |
Category: Extrusion Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Southwark
Year: 1960
-4000 Ton, -Max. Billet Size: 12" x 38", -Die Stack is 20" x 23.5", -Modern Die Shuffle, -Oilgear Pumps PVV200, -300 HP Motors, -Hydraulics upgraded in 2010 (Cost $680,000. USD), -PLC SLC ...more
Feeding and Straightening Machines
1 Result
12" x .125" RBI #SP2-12-7, feeder straightener, 7-roll, 24" feed length, entry side guides
D & H Machinery Inc | Toledo, OH | Sales |
Category: Feeding and Straightening Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rbi
Model: SP2-12-7
Red Bud Feeder Straightener, Capacity: 12" Wide x 0.020" - 0.125" (Mild Steel), Straightener:, -Model: SP2-12-7, -S/N: SPH90-M0344, -7 Roll Straightener, -Pull Thru 3 over 4, -Independent ...more
100 Ton, Oak #FDM-717, die fin, 36 rows, 0.500" x 1.25" x 1.083", 1985
D & H Machinery Inc | Toledo, OH | Sales |
Category: Fin Dies
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: FDM-717
Year: 1985
Oak Fin Die, Model: FDM-717, -Fin Pattern 0.500" x 1.25" x 1.083", -Number of Rows: 36, -4 Draw, -4 Progression, -Staggered Ribbon, -Lanced, V-Waffle, -Material: 0.005" - 0.006", -Collar: ...more
100 Ton, Oak #FDM-9+75-1, die fin, .375" x 1" x .866" staggered draw type, 1993
D & H Machinery Inc | Toledo, OH | Sales |
Category: Fin Dies
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: FDM-9+75-1
Year: 1993
Oak Fin Die, Model: FDM-975-1, Fits in an Oak FP3-54 100 Ton Fin Press, Die Type: Draw, Pattern: 0.375" x 1.00" x 0.866" Staggered, Style: Ribbon, Size: 48 Rows x 4 Holes per row per ...more
Oak, die fin, .250" x .8" x .0693", 2 progression, 18 rows, 2001
D & H Machinery Inc | Toledo, OH | Sales |
Category: Fin Dies
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Year: 2001
Oak Fin Die, Model: FDM-1397-1, -Fin Pattern 0.3125" x 0.800" x 0.693", -2 Progression, -18 Rows, -Designed for an Oak FP-1A Fin Press, -In Storage: Toledo, OH, A typical and thorough ...more
D & H Machinery Inc has 4 more listings in Fin Dies.
60 Ton, Oak #FP2-42-108, fin press, 1.5" stroke, 9"-12" Shut Height, 133-350 SPM, 1966, rebuilt 1995
D & H Machinery Inc | Toledo, OH | Sales |
Category: Fin Press Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: FP2-42-108
Year: 1966
OAK FIN PRESS, MODEL: FP2-42 108, PRESS WAS MANUFACTURED IN 1966., SHIPPED TO OAK AND TOTALLY REBUILT IN 1995., CAPACITY: 60 TONS, STROKE: 1.5", SHUT HEIGHT: 9" TO 12" OVER A 3.836" ...more
60 Ton, Oak #FP2-48-717, fin press line, 1.5" stroke, 9"-12" Shut Height, 100-300 SPM, Oak uncoiler, Fin Stock Lube Tank, rebuilt 1995
D & H Machinery Inc | Toledo, OH | Sales |
Category: Fin Press Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: FP2-48-717
Model: FP2-48-717, Rebuilt in 1995 by Oak Press Solutions, Capacity: 60 Tons, Stroke: 1.50", Shut Height: 9" to 12" on 3.875" Bolster, Withdrawal Travel: 9" to 13", Die Area: 46" L-R x 34" ...more
100 Ton, Oak #FP3-54-366, fin press, 1.5" stroke, 150-300 SPM, lube tank, die table, stacker
D & H Machinery Inc | Toledo, OH | Sales |
Category: Fin Press Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: FP3-54-366
Oak Fin Press, -Model: FP3-54-366, -100 Ton, -Stroke: 1.50", -Strokes per Min.: 150 - 250, -:, -Lube Tank, -Die Table, -Fin Suction Unit, -Stacker, -In Storage: Rockford, IL.
D & H Machinery Inc has 2 more listings in Fin Press Machines.
Flat and Shape Straighteners for Coil Handling
1 Result
72" x 4" Rowe, straightener, 76" roll face
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rowe
-4" Dia., Chromed Rolls, -76" Roll Face, -1 Row of backups cams on center, -3 over 4 Roll Configuration, -Entry Set of Pinch Rolls, -Upper Roll is coated, lower roll is non-coated, -Left to ...more
Forklifts
1 Result
30000 lb. Autolift #L5-300-24, LP forklift, 24" load center, 100" lift height, air brakes
D & H Machinery Inc | Toledo, OH | Sales |
Category: Forklifts
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Autolift
Model: L5-300-24
-Model: L5-300-24, -30,000 Lb. Maximum Lift Capacity, -24" Load Center, -100" Lift Height, -LP Gas, -Cushion Tire, -48" Coil Stub (Ram), -Air Brakes, -2111 Hours on Hour Meter, -Tires 80% ...more
Gearboxes (Gear Reducers - No Driving Unit)
2 Results
129 HP, Delroyd #E120, speed reducer
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Model: E120
Delroyd Speed Reducer, -Model E120, -Single Reduction W/9.75:1 Ratio, -Rated at 129 HP at 1750 RPM IN, -Output Torque: 43,100 In. Lbs., -Output RPM: 179, -Input Shaft: 2.5" Dia., -Output ...more
176 HP @ 1750 RPM, Delroyd #E120, 342 RPM output, single reducer, 11.00 :1 ratio
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Delroyd
Model: E120
Delroyd Speed Reducer, -Model E120, -Single Reduction W/5.11:1 Ratio, -Rated at 176 HP at 1750 RPM IN, -Output Torque: 31,200 In. Lbs., -Output RPM: 342, -Input Shaft: 2.5" Dia., -Output ...more
H Frame Hydraulic Press Machines
2 Results
125 Ton, Dake #125-H, hydraulic H-frame press, 8" ram travel,
D & H Machinery Inc | Toledo, OH | Sales |
Category: H Frame Hydraulic Press Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dake
Model: 125-H
Dake H Frame press, Mod; 125 H, Capacity 125 ton, Width between uprights 48", Width between table channels 12.125", Minimum ram to table 5", Maximum ram to table 25", Ram travel 8", Screw ...more
Custom, H-Frame shop press, 12" diameter x 8" stroke hydraulic cylinder, 19" x 33" adjustable bed, 41" between frames, 5 HP, 1725 RPM
D & H Machinery Inc | Toledo, OH | Sales |
Category: H Frame Hydraulic Press Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Custom
-12" Dia. x 8" Stroke Hydraulic Cylinder, -19" x 33" Adjustable Bed, -12" x 3.5" I-Beam Side Frames, -41" Between Frames, -5 HP Hydraulic Pump, 1725 Rpm, 230 V, -Approx. Size: 60" L x 56" W ...more
Burr Oak #DVBHB-M123-17LH, double vertical bend hairpin bender, LH machine,,uncoiler, 1994
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hairpin Benders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Burr Oak
Model: DVBHB-M123-17LH
Year: 1994
Burr Oak DVBHB-M123-17LH Double Vertical Bend Hairpin Bender, -Left Hand Machine, -Feed Unit: DCFCL M5 21, -Cutter Head: DMTCO M5 25HL, -Length of Hairpins: 5" Min. - 36" Max., -Oak 12 Reel ...more
Burr Oak #DVBHB-M124-4RH, double vertical hairpin bender, right hand machine, uncoiler, 1995
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hairpin Benders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Burr Oak
Model: DVBHB-M124-4RH
Year: 1995
Burr Oak DVBHB-M124-4RH Double Vertical Hairpin Bender, -Right Hand Machine, -Feed Unit: DCFCL-M5-23 (Double Coil Feed and Coil Loader), -Cutter Head: DMTCO-M5-27 HL, -Length of Hairpins: ...more
Burr Oak #UTB-M319-33, universal tube bender, 2003
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hairpin Benders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Burr Oak
Model: UTB-M319-33
Year: 2003
Burr Oak Tube Bender, -Model: UTB-M319-33, -Universal Tube Bender, -For Automotive (Brake Lines, Fuel Lines, etc)., -For HVAC (Connector Tubes, Compressor Feeder Lines, etc.), - Tube ...more
Wilson Rockwell #524S, hardness tester, 6.2" throat, 2006
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hardness Testers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Wilson Rockwell
Model: 524S
Year: 2006
-Model 524S, -Vertical Capacity: 11", -Throat Depth: 6.2", -Hardness Parameters: Rockwell Superficial Scales, -Standards Compliance: Exceeds ASTM E18-03 and EN-ISO 6508, -Power Supply: 110 ...more
.25" x 72" Stamco hi-speed shear, new clutch & brake in 2016, #10357
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hi-speed Shears
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stamco
Stamco High Speed Shear, -For use in Cut-to-Length Line, -Capacity: 0.055" - 0.250" x 72" (65,000 PSI), -SPM: 150 (was in CTL Line running 150 FPM), -Air Clutch and Brake, -30 HP AC Motor ...more
.312" x 60" Wysong #630RKB, hi-speed shear, 60 SPM, Wichita air clutch & brake
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hi-speed Shears
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Wysong
WYSONG CUT-TO-LENGTH LINE SHEAR, MODEL: 630RKB, CAPACITY: 0.312" MILD STEEL, 0.210" STAINLESS, -72" WIDE CAPACITY, -60 STROKES PER MINUTE, -20 CUTS PER MINUTE, -BOW TIE TOP BLADE, 74" LONG ...more
Horizontal Band Saws
4 Results
9" x 18" W.F. Wells #W-9, horizontal bandsaw, variable speed, manual vise, fully guarded
D & H Machinery Inc | Toledo, OH | Sales |
Category: Horizontal Band Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: W.F. Wells
Model: W-9
W.F. Wells Horizontal Bandsaw, -Model: W-9, -9" x 18" capacity at 90 degree cut, -9" high x 8" wide at 45 degree cut (mitering not possible with barfeeding), -With Barfeed. Approx. 60" or ...more
10" x 17" W.F. Wells #W-10-2, horizontal band saw, semi-auto twin post design, 1991
D & H Machinery Inc | Toledo, OH | Sales |
Category: Horizontal Band Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: W.F. Wells
Model: W-10-2
Year: 1991
W.F. Wells Horizontal Bandsaw, Model: W-10-2, -Semi-Automatic Twin Post Design, -Capacity: 10" H x 17" W, 10" Diameter, -Table Capacity: 5,000 Lbs., -Blade Speed: 60 - 500 SFPM, -Blade ...more
11" x 9" Hem #750A, automatic horizontal band saw, 11' x .750" x .035" blade, 2008
D & H Machinery Inc | Toledo, OH | Sales |
Category: Horizontal Band Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Hem
Model: 750A
Year: 2008
-Model: 750A, -Rect Capacity (H): 11", -Rect Capacity (W): 9", -Rounds Capacity: 10", -Type (Auto, Manual, Semi): Automatic, -Blade Width: 0.75", -Blade Thickness: 0.035", -Cap Rect: 11" x ...more
D & H Machinery Inc has 1 more listing in Horizontal Band Saws.
7.5 /10 HP Hydraulic power units, 230/460 V., with air cooler (2 available)
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Power Units
Seller: D & H Machinery Inc
Location: Toledo, OH
-Two Units Available, -No. 1 - Motor: 7.5 HP, 1165 RPM, 230/460 V, with Valving, 45 Gallon Reservoir (approx.), -No. 2 - Motor: 10 HP, 1745 RPM, 230/460 V, 45 Gallon Reservoir (approx.) ...more
10 HP Rexroth Hydraulic Power Unit, 95 G/MIN and 45 G/MIN pump capacity, 115 HP, Hydraulic Oil Reservoir: 581 gal.,20 liter
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Power Units
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rexroth
Hydraulic Power Unit, Pump Units:, Pump Capacity (Hp1): 95 G/Min (360 L/Min), Pump Capacity (Hp2): 45 G/Min (170 L/Min), Motor (M1): 115 Hp (86 Kw), Pump Capacity (Hp3): 95 G/Min (360 ...more
15 HP Lincoln, hydraulic power unit, 1760 RPM, 230/460 V.
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Power Units
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Lincoln
Hydraulic Power Unit -15 HP Lincoln AC Motor 1760 RPM, 230/460 V, 40/20 Amp -Vickers Pump, V201P9P-15-1800 -Accumulator -Filter -60 Gallon Reservoir -Overall Size: 50" L x 39" W x 62" High ...more
D & H Machinery Inc has 3 more listings in Hydraulic Power Units.
25 Ton, Dreis & Krump #285, mechanical press brake, 6' overall, 62" between housing, manual ram adj., 1962
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Press Brakes
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dreis & Krump
Model: 285
Year: 1962
DREIS & KRUMP MECHANICAL PRESS BRAKE, MODEL 285, -CAPACITY: 25 TON, -BED LENGTH OVERALL: 6', -BETWEEN HOUSINGS: 62", -1.5 HP AC DRIVE MOTOR, -MECHANICAL CLUTCH, -MANUAL RAM ...more
25 Ton, Dreis & Krump #285, press brake, 10' overall, 62" between housing, 2" stroke, 3" Shut Height, 9" die space, 20-50 SPM
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Press Brakes
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dreis & Krump
Model: 285
Dreis & Krump Press Brake, Model 285, Capacity: 25, Overall Bending Length of Bed & Ram: 10', Distance Between Housings: 62", Stroke: 2", Shut Height Adj: 3", Die Space (SDAD): ...more
165 Ton, Haco #PPS165-12, hydraulic press brake, 12' overall, 122" between housing, 3-Axis CNC Back Gauge, 1998
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Press Brakes
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Haco
Model: PPS165-12
Year: 1998
-MODEL: PPS165-12, 165 Ton, -12' BED, -122" BETWEEN HOUSINGS, -3 AXIS CNC BACK GAUGE HIGH SPEED, -BC 45 CONTROLLER, -6" STROKE, -12" SHUT HEIGHT, -10" THROAT, -MERLIN LIGHT CURTAINS ...more
20 Ton, Denison Multipress #FD20-20H404TDD, 12" stroke, 21" daylight, 4.5" cylinder diameter, 1980
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Denison
Model: FD20-20H404TDD
Year: 1980
-Model Number: FD20-20H404TDD, -Tonnage: 20 Ton, -Stroke: 12", -Daylight: 21", -Cylinder Diameter: 4.50", -Advance: 550 IPM, -Pressing: 250 IPM, -Return: 500 IPM, -Bed Size: 18" x 26", -In ...more
25 Ton, Denison Multipress #F2L-35, 15" stroke, 25" daylight, 6" cylindrical diameter, 1988
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Denison
Model: F2L-35
Year: 1988
-Model Number: F2L-35, -Tonnage: 35 Ton, -Stroke: 15", -Daylight: 25", -Cylinder Diameter: 6", -Advance: 525 IPM, -Pressing: 240 IPM, -Return: 500 IPM, -Bed Size: 20" x 30", -In Storage: ...more
25 Ton, Denison Multipress, 12" stroke, 24.7" daylight, 4.5" cylinder diameter, 1986
D & H Machinery Inc | Toledo, OH | Sales |
Category: Hydraulic Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Denison
Year: 1986
-Model Number: Dual 25 Ton, -Tonnage: 25 Ton / 25 Ton, -Stroke: 12", -Daylight: 24.750", -Cylinder Diameter: 4.50", -Advance: 525 IPM, -Pressing: 240 IPM, -Return: 500 IPM, -Bed Size: 33" x ...more
D & H Machinery Inc has 7 more listings in Hydraulic Presses.
Bathy' s, strip cleaning system, 8" strip width, (2) entry rinse tanks, electrostatic cleaning tank, (4) exit rinse tanks
D & H Machinery Inc | Toledo, OH | Sales |
Category: Immersion Parts Washers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Bathy's
Strip Cleaning System, Strip Width: 12", Consisting of the following:, -Entry Rinse Tanks (2):, Top and Bottom Spray Head in each Tank., Strip Air Wipe on Exit Side of each Tank. ...more
Miscellaneous Packaging Equipment
1 Result
Core Cutter, Appleton #S-20-10, 12", 16" and 20" ID, 1977
D & H Machinery Inc | Toledo, OH | Sales |
Category: Miscellaneous Packaging Equipment
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Appleton
Model: CORE CUTTER
Year: 1977
Appleton Core Cutter, -Model S-20-10, -Capcity: 12", 16" and 20" I.D., Approx. 8' Long Cores, -Main Motor: 5 HP AC, 1740 RPM, 230/460 V, -Overall Size: 158" L x 30" W x 85" High, -In ...more
Miscellaneous Rolling Mill Equipment
1 Result
Sendzimir Lewis, 6 Hi rolling mill, 2000
D & H Machinery Inc | Toledo, OH | Sales |
Category: Miscellaneous Rolling Mill Equipment
Seller: D & H Machinery Inc
Location: Toledo, OH
Year: 2000
This mill is sold as a mill stand and internals only. Drives and winders, will be custom engineered per customer requirements., Operation: Z-High Cold Rolling, Material: Low Carbon ...more
Overhead-Bridge Cranes
1 Result
60 Ton, Konescranes, 36.5' Span, 40' lift, 120' L rails, 65 FPM trolley, remote Control (2 available)
D & H Machinery Inc | Toledo, OH | Sales |
Category: Overhead-Bridge Cranes
Seller: D & H Machinery Inc
Location: Toledo, OH
-60 Ton, -Rails: 120' Long (everything is for sale), -36.5' Span, -Remote Control, -40' Lift - 10/1.5 FPM with Auxiliary Hoist, -65 FPM Trolley - Inverter, -Walkway, -Lights ...more
Paint and Powder Systems
1 Result
Paintline, Hunter, 60" Wide x 0.072", aluminum, 500 FPM, variable speed, 80-150 HP, line tensioners, GE drives
D & H Machinery Inc | Toledo, OH | Sales |
Category: Paint and Powder Systems
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Hunter
Model: PAINTLINE
Hunter Paint Line, Material: Aluminum, Line Speed: 125 FPM Min, 500 FPM Max., Entry Section Speed: 125 FPM Min, 650 FPM Max., Exit Section Speed: 125 FPM Min, 650 FPM Max., Thread Speed: 50 ...more
Hendricks #Patriot-SRP, panel saw, 126" capacity, 0-130 FPM, 4" blade projection, 1998
D & H Machinery Inc | Toledo, OH | Sales |
Category: Panel Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Hendricks
Model: PATRIOT-SRP
Year: 1998
-Model: Patriot SRP, -Cutting Length & Pull Back Capacity: 3200 mm (126"), -Carriage Travel Speed: 0 - 130 FPM, -Blade Projection: 4", -Volts: 480, -Phase: 3, -Condition: Good.
SCM Sigma #115, panel saw, 1999
D & H Machinery Inc | Toledo, OH | Sales |
Category: Panel Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Scm
Model: 115
Year: 1999
-Model: 115.
Loopco, peeler, 48" wide, extended blade
D & H Machinery Inc | Toledo, OH | Sales |
Category: Peelers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Loopco
Loopco Peeler Table, -Was used in a 48" Wide Slitting Line, -Extending Blade Type, -In Storage: Toledo, OH.
Rowe #PT/HD-60, peeler table, 60" wide x .250", hydraulic cylinders for up/down & in/out, 1993
D & H Machinery Inc | Toledo, OH | Sales |
Category: Peelers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rowe
Model: PT/HD-60
Year: 1993
Rowe Peeler Table, Model PT/HD-60, -Capacity: 60" W x 0.250", -(2) Hydraulic Cylinders for Up / Down Movement, -(1) Hydraulic Cylinder for In / Out Movement of Peeler Blade, -Overall Size: ...more
Sesco, 60" W x .100" peeler table
D & H Machinery Inc | Toledo, OH | Sales |
Category: Peelers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Sesco
Sesco Peeler Table, -Capacity: 60" Wide x 0.100", -Hydraulic Cylinder Actuated, -In Storage: Toledo, OH.
D & H Machinery Inc has 2 more listings in Peelers.
60" x .250" Rowe, pinch roll, 62.5" between housing, 7" diameter rolls, 25 HP DC, 1750 RPM, 1993
D & H Machinery Inc | Toledo, OH | Sales |
Category: Pinch Roller
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rowe
Year: 1993
-Capacity: 60" x 0.250", -60" Face x 7" Dia. Rolls, -62.5" Between Housings, -Air Cylinder Loaded, -25 HP DC Motor with Blower, 1750 RPM, 500V, Less Solid State Drive, -In-Line Gear ...more
64" Machine Concepts, Pinch Rolls, 8" diameter x 68" Face, top roll driven, bottom roll idler, 5 HP, 1725 RPM, 1995
D & H Machinery Inc | Toledo, OH | Sales |
Category: Pinch Roller
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Machine Concepts
Model: MC-9534
Year: 1995
Driven Pinch Rolls, Model MC-9534, Capacity: 64" Wide, Consisting of:, -8" Dia. x 68" Face Width Rolls, Neoprene Covered, -Top Roll Driven, Bottom Roll Idler, -Air Bag Lift to Bottom Roll ...more
Stamco, pinion stand
D & H Machinery Inc | Toledo, OH | Sales |
Category: Pinion Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Monarch Stamco Right Angle Pinion Stand, S.O. 18830, Machine No. 2979, Ratio 20:1, Input Flange O.D. 6", Input Drive Shaft 2.0", Output Drive Shaft 2.50", Output Shaft Spacing 8" center to ...more
Stamco, pinion stand
D & H Machinery Inc | Toledo, OH | Sales |
Category: Pinion Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Ratio: 1:1, Input Flange OD: 11", Input Drive Shaft: 2.50", Output Drive Shaft: 2.750", Output Shaft Spacing: 8" Center to Center, Input Motor HP: 75 HP, Overall Size: 28" L x 21" W x 28.5" ...more
Pipe Threaders (Includes Nipple Machines, Pipe and Tube Cutters)
1 Result
Sesco, 60" width x 0.100" pneumatic pit threading table
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Sesco
Sesco Pit Threading Table, Capacity: 60" Wide x 0.100", Pneumatic Pit Threading Table, In Storage: Toledo, OH.
Savage #WJS-20, aluminum plate saw, 7.25" thick, 24" blade diameter, powered blade elevation, blade traverse, 1999
D & H Machinery Inc | Toledo, OH | Sales |
Category: Plate and Block Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Savage
Model: WJS-20
Year: 1999
Savage Aluminum Plate Saw, Model: WJS-20, 7.25" Cut Thickness, 19' Long Table, 24" Dia. Blade, 14' Cutting Length, 9' Front Back Travel, 14" Vertical Head Travel, Table rotates ...more
Savage, aluminum plate saw, 7.25" thickness, 24" blade diameter, 4 hold downs, 1999
D & H Machinery Inc | Toledo, OH | Sales |
Category: Plate and Block Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Savage
Year: 1999
Savage Aluminum Plate Saw, -7.25" Maximum Thickness, -24" Blade Diameter, -12' Cutting Travel, -48" Power Gauging, -4 Holddowns, -6" x 12" Cutting Table, -Powered Feeds, -Newer Controls ...more
1.5" x 90" Custom plate shear, 1942
D & H Machinery Inc | Toledo, OH | Sales |
Category: Plate Shears
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Custom
Year: 1942
Custom Plate Shear, -Capacity: 1.5" x 90", (Can Shear up to 2" Thick Depending on Material Temperature), -Was used on a Hot Mill.
Polishers (Including Buffing Jacks)
1 Result
Ramco, 30" wide x 0.048" coil polishing line, 72" OD, 16"-20" ID, 150 FPM, hydraulic expansion
D & H Machinery Inc | Toledo, OH | Sales |
Category: Polishers (Including Buffing Jacks)
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ramco
Coil to Coil Polishing Line, Materials: Stainless Steel, Maximum Coil Width: 30", Maximum Thickness: 0.048", Maximum Coil Weight: 15,000#, Maximum Shear: 45,000 PSI, Maximum Yield: 45,000 ...more
Power Generation Plants and Equipment
1 Result
Steel service center, 6000 sq.ft warehouse, 1000 sq.ft. office
D & H Machinery Inc | Toledo, OH | Sales |
Category: Power Generation Plants and Equipment
Seller: D & H Machinery Inc
Location: Toledo, OH
Model: STEEL SERVICE CENTER
Real Estate: Leased, Building Sq. Ft: 6000 sq. ft. Warehouse, 1000 sq. ft. Office, This established 30 Year Old Small Steel Service Center is known, for it's expertise and proficiency ...more
Power Squaring Shears (Inch)
16 Results
.036" x 4' Strilich hydraulic shear, 170 SPM, 2000
D & H Machinery Inc | Toledo, OH | Sales |
Category: Power Squaring Shears (Inch)
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Strilich
Year: 2000
-Strip Width: 48", -Material Thickness: 0.036" Maximum, 0.015" Minimum, -Maximum Yield: 35,000 psi, -Four (4) side high carbon - high chrome shear blades, upper bowtie, lower straight rake ...more
.075" x 5' Famco #E13606-P-PC127, cut to length shear, 5 HP, 190 SPM
D & H Machinery Inc | Toledo, OH | Sales |
Category: Power Squaring Shears (Inch)
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Famco
Model: E13606-P-PC127
Model: E13606-P-PC127, -Capacity: 60" x 0.075" (14 Ga.), -Blade Length: 74", -Bow Tie Bottom Blade, -Main Motor: 5 HP AC, -Under Drive Design, -Air Clutch & Brake, -Speed: 190 SPM ...more
.075" x 6' Wysong #1472, power squaring shear, 60 SPM, 2 HP
D & H Machinery Inc | Toledo, OH | Sales |
Category: Power Squaring Shears (Inch)
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Wysong
Model: 1472
Wysong Shear with Rowe Entry Pinch Roll Assembly, Wysong Shear:, -Model: 1472, -Capacity: 0.075" x 72" (Mild Steel), -73" Face Blade (Straight Blade), -Strokes Per Min: 60 (Approx.), -2 HP ...more
D & H Machinery Inc has 13 more listings in Power Squaring Shears (Inch).
Precision Roller Levelers
10 Results
4.7" x .004" -.060" Kohler #12-120-B, precision leveler, 19 work rolls, 9 over 10,1982
D & H Machinery Inc | Toledo, OH | Sales |
Category: Precision Roller Levelers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Kohler
Model: 12-120-B
Year: 1982
-Model: 12-120-B, -Capacity: 4.72" x 0.004" - 0.060", (120 mm x 0.1 - 1.5 mm), -19 Work Rolls, 9 over 10, 0.472" Dia. x 5" Face Rolls, (12 mm Dia. x 127 mm Face), -2 Flights of Back-Ups ...more
30" x 0.071" Herr Voss, 0.028"-0.071" @ 140000psi, 17 rolls, 1.500" dia x 32" face rolls, 1986
D & H Machinery Inc | Toledo, OH | Sales |
Category: Precision Roller Levelers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Year: 1986
Herr Voss Leveler, -30" Maximum Width Capacity, -Material Thickness: 0.028" - 0.071" @ 140,000 PSI Yield, -17 Work Rolls, -1.500" Diameter x 32" Face Rolls, -(3) Flights of Backups, Center ...more
48" x .02" -.075" Herr Voss, leveler, 17 rolls, 1.5" dia x 54" face rolls, 30-210 FPM, LR
D & H Machinery Inc | Toledo, OH | Sales |
Category: Precision Roller Levelers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Herr Voss Leveler, -Capacity: 48" x 0.020" - 0.075", -Material: 45,000 psi Yield Strength, -17 Rolls, -1.5" Dia. x 54" Face Rolls, -5 Flights of Backups, 3 Flights motorized, -Line Speed: ...more
D & H Machinery Inc has 7 more listings in Precision Roller Levelers.
Reciprocating Surface Grinders - Horizontal Spindle
1 Result
20" x 60" Chevalier #FSG-2060ADII, surface grinder, 14" x 2" x 5" grinding wheel, dresser
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Chevalier
Model: FSG-2060ADII
-Model Number: FSG-2060 ADII, -20" x 60" Magnetic Chuck Size, -19.625" x 59" Table Size, -2,420 Lbs. Max. Table Capacity, -14" x 2" x 5" Standard Grinding Wheel, -63" Longitudinal Travel ...more
1000 lb. Ruesch, dual head recoiler, 12" dia x 20" face drum, manual expansion, disc brake
D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch Dual Head Recoiler, -N2729D 6042, -1,000 lb. Capacity Each Head, -1st Head - 12" Dia. x 20" face Drum, Manual Expansion, Material Slot (No Gripper), Disc Brake, Electric Clutch, -2nd ...more
2000 lb. Progressive #620-SM-RH, traverse wind recoiler, 10.5" W, 30" OD, 15" ID
D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Progressive
Progressive Machine Co. Traverse Wind Recoiler, Model: 620-SM-RH, Serial Number: 17060620, Spooler Machine No.: SO# 37370, Maximum Coil Weight: 2,000 Lb., Spool Size:, O.D.: 30" (762mm) ...more
10000 lb. Paxson, recoiler, 36", 16" diameter x 42" face drum, manual clamp & expansion
D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
Paxson Recoiler, -Capacity: 10,000# x 36", -16" Diameter x 42" Face Drum, -Manual Clamp and Expansion, -Hydraulic Pushoff, -Overarm Separator, -40 HP AC Motor, 1775 RPM, 230/460 V, Eaton ...more
D & H Machinery Inc has 23 more listings in Recoilers.
20" x .118" Cattaneo #AE95-500, roll feeder, 2-rolls, 3.7" roll diameter, servo drive, 98 FPM, 1996
D & H Machinery Inc | Toledo, OH | Sales |
Category: Roll Feeders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cattaneo
Model: AE95-500
Year: 1996
Roll Feeder, Model: AE 95-500, Maximum Coil Width: 20" (500 mm), Material Thickness: 0.118" Steel, 0.157" Aluminum, Number of Rolls: 2, Roll Diameter: 3.7" (95 mm), Driving Force: Servo ...more
24" x 96" Landis #3RH, roll grinder, automatic infeed, 4-jaw 18" chuck, Bijur lube, coolant
D & H Machinery Inc | Toledo, OH | Sales |
Category: Roll Grinders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Landis
Model: 3RH
-Model: 3RH, -Nominal Grinding Capacity: 24" Dia. x 96" Long, -Actual Swing Over Table: 25.50" Dia., -Grinding Wheel Size: 14" x 1.50" x 5", -Grinding Wheel Speeds: (2) - 1720 & 2185 ...more
Planet #495-E, deformation generator for bar 3-18, 0.375"-1" round, 1"-2" square, manuals
D & H Machinery Inc | Toledo, OH | Sales |
Category: Roll Lathes
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Planet
Model: 495-E
Year: 1972
14" Diameter Roll Lathe "Deformation Generator", Mfg: Planet Products Corp., Model: 495-E, Capacity: Up to 14" Diameter Rolls, Motor: 3 HP AC, Makes Steel Mill Rolls to be used in the ...more
2 Stand, Custom, channel punch line, 18-16 coil gauge, 34" roll spacing, 1.5" roll shift diameter
D & H Machinery Inc | Toledo, OH | Sales |
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Custom
-Coil Gauge: 18 - 16, -Number of Stands: 2 Stands, 4 Satallite, -Roll Spacing: 34", -Roll Shift Diameter: 1.50", -Machinery Length: 8', - of Parts Made: Punch Only 2.50" Thick.
7 Stand, Dahlstrom, rollformer, 28" roll space, 3" arbor diameter, 8"-12" vertical adjustment, 60 HP
D & H Machinery Inc | Toledo, OH | Sales |
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dahlstrom
7 Stands on 12 Stand Base, -Capacity: 10 - 12 Gauge, -Roll Space: 28", -Arbor Diameter: 3.00", -Vertical Adj: 8.00" - 12.00", -Horizontal Centers: 22", -Motor: 60 HP, -Dimensions: 24'6" ...more
8 Stand, Dahlstrom #400-8-OB, 1.5" shafts, 10" roll space, 30-125 FPM, #7679
D & H Machinery Inc | Toledo, OH | Sales |
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dahlstrom
Model: 400-8-OB
Model: 400-8-OB Geared Head Rollformer, Number of stands: 8 on a 10 Stand Base, Diameter of shafts: 1.5", Roll Space: 10", Vertical Distance between centers: 4" to 7", Horizontal distance ...more
D & H Machinery Inc has 5 more listings in Rollformers.
54" McKay, pinch rolls, entry & exit passline rolls, 4.5" diameter x 56" face rolls, 52" passline
D & H Machinery Inc | Toledo, OH | Sales |
Category: Rolls
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: 4.50
Model: 56.00000
McKay 54" Wide Pinch Rolls, -Driven Pinch Rolls:, Entry and Exit Passline Rolls, 9" Dia. x 56" Face Rolls, Polyurethane Covered, Top Roll is Open/Closed by Hydraulic Cylinder, Bottom Roll ...more
Rotary Screw Air Compressors (Positive Displacement)
1 Result
Phillips, piston air compress, 10 HP AC motor, 1740 RPM
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Phillips
-Piston Type Air Compressor, -10 HP AC Motor, 1740 RPM, 208/220-460V, -5950 SO Western PR-8-1100, -Overall Size: 64" L x 29" W x 63" High, 900 lbs., -In Storage: Toledo, OH.
Scrap Winders for Coil Handling
15 Results
Stamco, scrap winder
D & H Machinery Inc | Toledo, OH | Sales |
Category: Scrap Winders for Coil Handling
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stamco
-250" Mild Steel Capacity, -Oscillating Level Wind, -Powered Scrap Dump-Spool divides hydraulically to dump the, wound scrap behind., -Self Contained Hydraulic Unit.
Loopco, scrap winder, 24" W x 44" diameter spool
D & H Machinery Inc | Toledo, OH | Sales |
Category: Scrap Winders for Coil Handling
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Loopco
-24" Wide x 44" Dia. Spool, -Oscillating Design for Level Wind, -Hydraulic Driven, -77" L x 52" W x 47" H = 1,500 lbs.
Loopco, scrap winder, 13" W x 44" spool
D & H Machinery Inc | Toledo, OH | Sales |
Category: Scrap Winders for Coil Handling
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Loopco
-Oscillating Design for Level Wind, -Hydraulically Driven, -13" Wide x 44" Spool, -Shipping Dimensions: 56" L x 44" W x 57" H.
D & H Machinery Inc has 12 more listings in Scrap Winders for Coil Handling.
Sendzimir Rolling Mills
1 Result
52" DMS #ZR22BBS52 Sendzimir Rolling Mill, 20 Hi 1 Stand
D & H Machinery Inc | Toledo, OH | Sales |
Category: Sendzimir Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dms
Model: ZR22BBS52
Type: ZR22BBS52, Annual Tonnage Previously Rolled: 250,000 MT, -Materials: HCS, LCS, Stainless, -Maximum Coil Width: 52" (1320mm), -Minimum Coil Width: 23.6" (600mm), -Input Max. Gauge: ...more
36" x .048" CWP #SMX36, servo feeder, pilot release, ServoMax II Control, 2000
D & H Machinery Inc | Toledo, OH | Sales |
Category: Servo Feeders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cwp
Model: SMX36
Year: 2000
-Model: SMX36, -Capacity: 36" x 0.048", -Feed Length: 999", -Pilot Release, -Catenary Rolls, -Manually Adjustable Side Guides, -Trabon Lube, -ServoMax II Control w/Digital Touchscreen, -In ...more
36" x .135" Mecon #400F-I Series, Precision Servo Feeder, 37" Face x 4" diameter Rolls, 1995
D & H Machinery Inc | Toledo, OH | Sales |
Category: Servo Feeders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Mecon
Model: 400F-I
Year: 1995
Mecon Precision Servo Feeder, 400F-I Series, -36" Wide Capacity, -37" Face x 4" Dia. Rolls, Air Cylinder Loaded, -Thickness capacity, 12" x.255" thick max to 30" x.160" and 36" x.135" ...more
48" x .075" G. Macicania, servo feeder, 49" roll face, 5" diameter, entry catenary rolls, 2002
D & H Machinery Inc | Toledo, OH | Sales |
Category: Servo Feeders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: G. Macicania
Year: 2002
-48" Wide x 0.075" Servo Feed, -49" Roll Face, -5" Diameter Roll, -Entry Catenary Rolls, -Adjustable Side Guides, -1.45 KW, 3000 RPM Servo Drive Motor, -In Storage: Toledo, OH.
D & H Machinery Inc has 1 more listing in Servo Feeders.
Shear Blade Die, 54" wide blade, bump type die
D & H Machinery Inc | Toledo, OH | Sales |
Category: Shear Blades
Seller: D & H Machinery Inc
Location: Toledo, OH
Shear Blade Die, -54" Wide Blade, -Bump Type Die, -Overall Dimensions: 13.5" Wide x 62" Long x 9" High, -In Storage: Toledo, OH.
Shear End Welders
1 Result
10" x .135" Guild #PSA135-10, end welder, 10" wide x .135" thick, 460 V., 30 amp
D & H Machinery Inc | Toledo, OH | Sales |
Category: Shear End Welders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Guild
Model: PSA135-10
-Model: PSA 135-10, -10" Wide x 0.135" Thick, -460 V, 30 A, -No Welder Power Supply.
Sheet and Strip Straighteners
11 Results
20" x .118" Cattaneo #RMA60-500, straightener, 1996, #10785-HK
D & H Machinery Inc | Toledo, OH | Sales |
Category: Sheet and Strip Straighteners
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cattaneo
Model: RMA60-500
Year: 1996
Model: RMA60-500, Coil Width: 20" (500 mm), Maximum Thickness: 0.118" Steel, 0.157" Aluminum, Number of Feed-In Rolls: 2, Number of Straightening Rolls: 9, Roll Diameter: 2.4" (62 mm) ...more
24" x .25" Herr, sheet & strip flattener, 30" roll face, 5 rolls, 6" dia work rolls, 15 HP
D & H Machinery Inc | Toledo, OH | Sales |
Category: Sheet and Strip Straighteners
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr
Herr Sheet and Strip Flattener, Capacity: 24" x 0.250" (Mild Steel), -30" wide roll face, -5 Rolls - 2 over 3, -6" Diameter Work Rolls, -Manual Side Guides, -15 HP AC Feedup Motor, -Removed ...more
36" x .04" Bradbury & Tishken, leveler, 5 HI, 11 rolls, 100 FPM, 40" passline, 1994
D & H Machinery Inc | Toledo, OH | Sales |
Category: Sheet and Strip Straighteners
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Bradbury & Tishken
Year: 1994
Bradbury Auto-Corrective Hydraulic Leveler - 5 HI, Material Width: 6" - 36", Material Thickness: 0.008" to 0.040", Material Yield: 50,000 PSI Maximum, 30,000 PSI Minimum, Work Roll Number: ...more
D & H Machinery Inc has 8 more listings in Sheet and Strip Straighteners.
Sheet Metal Duct Machinery
1 Result
Spiromatic Spiral Duct Former #600, 3.94" - 49.21" duct diameter range, 65 FPM, double end uncoiler, saw blade duct cutoff
D & H Machinery Inc | Toledo, OH | Sales |
Category: Sheet Metal Duct Machinery
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Spiromatic
Spiromatic Spiral Duct Former, Model: 600, Duct Diameter Range: 100mm - 1250mm (3.94" - 49.21"), Gauge range: 0.4mm - 1.0mm TO DW144 (0.0157" - 0.0394"), Max strip speed: 65 FPM, Double-end ...more
Miller-moorehead #4800, sheet slitter,
D & H Machinery Inc | Toledo, OH | Sales |
Category: Sheet Slitters
Seller: D & H Machinery Inc
Location: Toledo, OH
Model: 4800
-Model: 4800, -Variable Speed, -On Switch, -Start Switch, -Jog Switch, -Motorized, -1.50 HP, -1750 RPM, -400 Max. Amp, -Ratio: 4 to 1, -Extra Rollers: 2 Sets, -In Storage: Toledo, OH.
Single Crank OBI Flywheel Press Machines
2 Results
45 Ton, Bliss, OBI press, 3" stroke, 12" Shut Height, 3" adj., 29.5" x18" bed, air clutch, 1976
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Bliss
Year: 1976
Capacity: 45 Ton, Flywheel Driven, Air Clutch, Stroke: 3", Adjustment: 3", Shut Height: 12", Bed Area: 29.50" L-R x 18" F-B, Bolster: 2.50" Thick, Ram Area: 15" L-R x 8" F-B Approx., Not ...more
45 Ton, L & J, OBI flywheel press, 4" stroke, 11-1/8" Shut Height, 3" adj., 28" x18" bed, air clutch
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: L & J
Capacity: 45 Ton, Stroke: 4", Adjustment: 3", Shut Height on Bed: 11 1/8", Bed Area: 28" L-R x 18" F-B, T-Slotted Bolster: 2" Thickness, Ram Area: 18" L-R x 12" F-B, Flywheel Driven, Air ...more
Slear Lines (Cut-to-length and Slit To Width)
1 Result
60" x .06 Iowa, slear line, 20000 lb., 64" outside dimension, 20"-24" ID, uncoiler, 2004
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Iowa
Year: 2004
-Model Number: Iowa Precision Slear 1, -Materials: CRS, Alum, Galv, Pre-Paint, -Min./Max. Coil Width: 6" - 60", -Thickness Range: 0.015" - 0.064", -Maximum Shear: 45,000 PSI, -Maximum ...more
13" x 2.875" Ruesch #76, precision slitter head, non-driven pinch rolls, #10733
D & H Machinery Inc | Toledo, OH | Sales |
Category: Slitters
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Model: 76
Ruesch Precision Slitter Head, Model: 76, Width: 13", Arbor Diameter: 2.875", -Swing Away Entry Unit, Adjustable Side Guides, Passline Roll, Non Driven Pinch Rolls, -Independent Arbor ...more
16" x 4" Herr, slitter head
D & H Machinery Inc | Toledo, OH | Sales |
Category: Slitters
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr
Herr Slitter Head, -16" Wide, -4.00" Dia. Arbors, -Entry Side Guides, -Parallel Arbor Adjustment, Powered, -AC Threading Drive Motor, -No Tooling, -Passline: Approx. 41", -Overall Size: ...more
24" x 3" Stanat Slitter Head
D & H Machinery Inc | Toledo, OH | Sales |
Category: Slitters
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stanat
Stanat Slitter Head, -30" Face x 4" Dia. Arbors, -Parallel Arbor Adjustment, -AC Motor Driven thru Manual Transmission, Belt driven to Arbors., -Passline: 44", -Small Amount of Tooling ...more
D & H Machinery Inc has 15 more listings in Slitters.
9" x 2.5" National Standard, pull thru line, dual recoilers, L to R
D & H Machinery Inc | Toledo, OH | Sales |
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: National
National Standard Slitting Line, Pull Thru Slitting Line with Dual Takeups, -Capacity:, Material Width: 9", Thickness Range: 0.005" (0.127mm) - 0.062" (1.6mm), Number of Cuts: 9 Cuts 0.005" ...more
12" x 2.5" Ruesch #76, slitting line, 1000 lb., scrap winder, dual recoilers
D & H Machinery Inc | Toledo, OH | Sales |
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Model: 76
-Ruesch Model Number: 76, -Type Slitter: Pull Through Finger Set Up, -Line Direction: Right to Left, Material:, Type: Beryllium Copper, High Carbon and Stainless Steel, Width: 2" to 12" ...more
12" x 4" Yoder, slitting line, installed and running
D & H Machinery Inc | Toledo, OH | Sales |
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Yoder
Consisting of the following:, -Uncoiler:, 12" Wide, 16" - 20" I.D., Hydraulic wedge type expansion, Air Operated Band Brake, Hydraulic slide base, -Slitter Head:, Yoder M2 1/2, 4" Dia. ...more
D & H Machinery Inc has 36 more listings in Slitting Lines.
Squirrel Cage AC Electric Motor
7 Results
20 HP RPM Allis-Chalmers Motor
D & H Machinery Inc | Toledo, OH | Sales |
Category: Squirrel Cage AC Electric Motor
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Allis-Chalmers
-In Storage: Holland, OH.
50 HP 1775 RPM Motor, 230/460 Volts
D & H Machinery Inc | Toledo, OH | Sales |
Category: Squirrel Cage AC Electric Motor
Seller: D & H Machinery Inc
Location: Toledo, OH
-50 HP AC Motor, -1775 RPM, -230 / 460 V.
125 HP 1194 RPM A.O. Smith, Frame 449T E-Plus Series, tefc, 1.15 service factor, 460 Volts
D & H Machinery Inc | Toledo, OH | Sales |
Category: Squirrel Cage AC Electric Motor
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: A.o. Smith
Frame: 449T
-E-Plus Series, -Cat. No.: E843, -Part: C-393103, -Frame: 449-T, -HP: 125, -Volts: 460, -Freq: 60, -Amps: 153, -RPM: 1194, -Phase: 3, -Enc. Tefc, -Cambient/Ins.: 40 Deg. C, -Drv. Brg: ...more
D & H Machinery Inc has 4 more listings in Squirrel Cage AC Electric Motor.
Cincinnati, 48" w x 10' l stacker
D & H Machinery Inc | Toledo, OH | Sales |
Category: Stackers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cincinnati
Cincinnati Stacker, Capacity: 48" W x 10 Ft Long, -Mounted to back of Shear, -Skate Roll Supports, -Bombay Drop Type, -Side Discharge, -Powered End Stop, -Exit Conveyor, -Installed.
60" Pro-Eco, Banding Line Stacker, 60" OD power split conveyor, 36" pass height
D & H Machinery Inc | Toledo, OH | Sales |
Category: Stackers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Pro-Eco
Pro Eco Banding Line Stacker, -60" O.D. Capacity, -O.D. Grab Design, -In Line Discharge, -Powered Split Conveyor, -36" Min. Pass Height, but presently on an 18" Riser to make it 54", -76.5" ...more
72" x 0.375" Automatic Feed Stacker, 1976
D & H Machinery Inc | Toledo, OH | Sales |
Category: Stackers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Automatic Feed
Year: 1976
Automatic Feed Stacker, Model: 72 - 240, -Width Capacity: 18" Min. to 74" Max., -Material Thickness: 0.060" to 0.375", -Sheet Length: 12" Min. to 240" Max., -Stack Height: 18" Max., -End ...more
D & H Machinery Inc has 2 more listings in Stackers.
Steel Slat and Chip Conveyors
3 Results
6" x 93" Chip Conveyor, powered belt, single speed, AC motor, 110 V., 1-phase, 2007
D & H Machinery Inc | Toledo, OH | Sales |
Category: Steel Slat and Chip Conveyors
Seller: D & H Machinery Inc
Location: Toledo, OH
Year: 2007
Chip Conveyor, -Width: 6", -Length: 93", -Powered Belt, -Single Speed, -AC Motor Driven, -Voltage: 110 V, Single Phase, -In Storage: Toledo, OH..
6" x 142" Chip Conveyor, powered belt, 110 V., 1-phase, mounted on casters
D & H Machinery Inc | Toledo, OH | Sales |
Category: Steel Slat and Chip Conveyors
Seller: D & H Machinery Inc
Location: Toledo, OH
Inclined Chip Conveyor, -Width: 6", -Length: 142", -Powered Belt, -Single Speed, -AC Motor Driven, -Voltage: 110 V, Single Phase, -Mounted on Casters, -Overall Size: 142" Long x 88" High ...more
12" x 108" Chip Conveyor, powered belt, variable speed, 110 V., 1-phase, .5 HP Baldor motor, 1750 RPM, 2007
D & H Machinery Inc | Toledo, OH | Sales |
Category: Steel Slat and Chip Conveyors
Seller: D & H Machinery Inc
Location: Toledo, OH
Year: 2007
Inclined Chip Conveyor, -Width: 12", -Length: 108", -Powered Belt, -Variable Speed, -AC Motor Driven: Baldor 0.5 HP, 1750 RPM, -Voltage: 110 V, Single Phase, -Overall Size: 108" Long x 82" ...more
Straight Side Double Crank (Single Action) Press Machines
1 Result
100 Ton, Oak #FP3-54-1152, fin press line, 1.5" stroke, 9" Shut Height, 51" x48" die area, 5" bolster, reconditioned 2017
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: FP3-54-1152
Oak FP3-54-1152 Fin Press Line, Tonnage: 100, Die Area: 51" l-r x 48" f-b, Stroke: 1.50", Shut height: 9" - 12", Bolster: 5", Withdrawal Travel: 9" - 14", Speed: 133 - 300 spm, Electrics: ...more
Taylor-Winfield strip welder, 76" W, new never used, electrical control system
D & H Machinery Inc | Toledo, OH | Sales |
Category: Strip Welders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Taylor-Winfield
Taylor Winfield 76" "C" Flat Seam Welder, New, Never Used, Consisting of the following:, -Entry and Exit Deflector, -In/Line P W H T System, -Electrical Control System, -Weld Control & ...more
Taylor-Winfield, strip welder, 200 KVA, 460 V., .090" @ 50000 psi, 1995
D & H Machinery Inc | Toledo, OH | Sales |
Category: Strip Welders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Taylor-Winfield
Year: 1995
TAYLOR WINFIELD STRIP WELDER, -200 KVA, -TYPE: 76 HORIZONTAL PREP/LAP, -MACHINE NO.: 940209, -VOLTAGE: 460V, -MAXIMUM MATERIAL THICKNESS: 0.090" @ 50,000 PSI YIELD, -MACHINE WEIGHT: 75,000 ...more
24" Custom, tension stand, drag board, air clamp, entry separator shaft, roll tension unit
D & H Machinery Inc | Toledo, OH | Sales |
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Custom
Combination Tension Stand, -Drag Board:, Air Clamp, Entry Separator Shaft, -Roll Tension Unit:, 30" Face x 10" Diameter, Both Rolls have Eaton Water Cooled Brakes.
26" Ruesch, tension stand, hydraulic cylinder for retraction, pad type
D & H Machinery Inc | Toledo, OH | Sales |
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch Tension Stand, -Hydraulic Cylinder for Retraction, -Pad Type, -Removed and in storage: Toledo, OH.
48" x .135" Nova, entry/exit pit tables, 1990, #8893
D & H Machinery Inc | Toledo, OH | Sales |
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Nova
Year: 1990
Nova Tension Stand, Capacity: 48" x 0.135", -Exit Pit Table, Raised and Lowered by Hydraulic Cylinder, -Entry Passline Rolls, -Entry Separator Tooling Bar, -Pad Tension Device, Air ...more
D & H Machinery Inc has 8 more listings in Tension Stands.
Tooling and Accessories - Miscellaneous
3 Results
Holddown Device, McKay, under drum, 6" diameter rolls (2), 22" stroke, 25" floor to roll
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Mckay
Model: HOLDDOWN DEVICE
-Under Drum Design, -Twin 6" Dia. Urethane Rolls for holding Coil, -Hydraulic Cylinder Actuated, Approx. 22" stroke, -25" from floor to center of Rolls, -Overall Size: 60" L x 24" W x 28" ...more
Pinion Box Rebuild Parts, for Herr Voss Leveler
D & H Machinery Inc | Toledo, OH | Sales |
Seller: D & H Machinery Inc
Location: Toledo, OH