Buy or Sell Your Hauser Machines

VERTICAL MACHINING CENTERS HSM 300 54k RPM BLUM laser tool measuring RENISHAW OMP400 touch probe Preparation for robot automation.

Item 1141: 8″, Diameter x 60″Long carbon steel Screw Conveyor with stainless steel top, 2HP, 230/460V, 3 ph motor and drive., Current auger speed = 36 RPM..

10’ X 40’ 12,000 Watt Laser Cutting System with FSCUT 8000 CNC Control System, Water Chiller, Transformer, Voltage Regulator, Enviromental Cabinet for Laser Resonator, Two Year Warranty, Onsite Installation and Training., Model Number: Wind 12030 (open top single bed with side shield), Laser Table: 10' ...more

Model: AMADA FO3015NT, Laser Power: 4KW, Laser Type: Flying Optic, Max Sheet Size: 120” X 60", Shuttle Table: Yes, Z Axis Travel: 7.8", X Axis Travel: 61”, Y Axis Travel: 122”, Combined Max Speed: 4454 IPM, Control: AMADA AMNC-PC, Resonator: Fanuc, Approx. Weight: 30,000 LBS, Year New: 2007.

Model: Pulsar 1212XL, Laser Power: 2.0 KW, Laser Type: High Bred, Max Sheet Size: 4’ X 100”’, Reposition: Yes, Z Axis Travel: 11.8”, X Axis Travel: 50”, Y Axis Travel: 50", Max Sheet Weight: 484 LBS, Control: Fanuc 16iL, Resonator: Fanuc C2000, Dust Collector: Yes, Chiller: Yes, Work ...more

9in Dia. x 10ft Long Center-Feed Auger, Size: 9in Dia. x 10ft LongConstruction: Carbon SteelType: Screw Auger ConveyorPitch: Standard PitchFlighting: 3/8" FlightingOutlets: (2) 10in x 10in Outlets, (1) on Driven End, (1) on Non-Driven End Center of Inlet to Center of Outlet (Non-Driven End): 36inCenter of Inlet to ...more

one(1) used Chemat Technologies Dip Master Test Cabinet Model DM-201 Serial number 5104 Approx. dimensions 18" x 18" x 33.5" tall Front hinged door Side mounted control panel Single phase, 115 voltage power on/off motor control for raising and lowering hanger Heater controls with timer 2 heaters Unit ...more

California Pellet Mill, Model CL, Laboratory size pellet Mill. Rated from 30 to 200 pounds of pellets per hour – depending on materials, application and machine configuration. 17" long x 13" wide x 17" deep product hopper, 4" wide x 20" long vibratory feeder, 36" long x 4" OD ...more

Brand: L&A ENGINEERING, Condition: USED, "AS-IS", Model: T-1003, Capacity: 350 GALLON, Serial: 10227, Power Rating: -, Weight: APPROXIMATELY 2,000 LBS. W/ SKID, Category: COOKERS, ERC #: MO-2522, Job #: 069, Additional Notes: BATCH KETTLE BLENDING COOKER THAT WAS BEING USED FOR JAMS AND JELLIES. UNIT IS A COOKER ...more

, Feeds right to left, 72 shuttle feed, Full CNC programmable control, 4 canted head, Powered guide arm, Hydraulic vises, hydraulic feed, Coolant system, Manual chip auger, Bundle cylinders.

APV Crepaco Model S430 Stainless Steel Fruit Feeder, Serial number N-0232. Includes 16" x 17" x 16" deep stainless steel hopper. Hopper includes 1-1/2" diameter agitator shaft with (4) 1/2" diameter curved rods/paddles, mounted above 4" diameter X 20" long bottom auger with 13/16" spacing between flights, discharging ...more

Inventory No. 0822-285-0004 Manufacturer Supertec Model No. G32P-50CNC Name Supertec G32p-50cnc Used CNC Od Grinder Arrival Date 12-02-2024 Dimensions L x W x H (inches) Unavailable Capacity 13" SWING Weight (lb.) 10000 Category CNC Condition Used, tested Available Quantity 1 Make Year 2012 Item Fanuc 0i-mate Td CNC ...more

10’ X 39’ 30 KW Fiber Laser with Beckhoff CNC Control, Nesting Software Lantek, Transformer, Voltage Regulator, Environmental Cabinet for IPG Laser Resonator, Zoned Downdraft Dust Collection System (2 Collectors), Chiller, On Site Installation and Training and 3 Year Warranty., Laser Table Size: 10’ ...more

Used 50 cu ft Burton Mixer rotary blender, model C10-10, carbon steel construction, rated 35#/ cu ft material density, with auger discharge, 5 hp motor.

Per-Fil MF micro-filler auger dosing system for precision powder filling applications. Previously used to produce organic baby powder and maintained in excellent condition. Designed to handle a 0.51000 gram fill range across various container sizes, making it suitable for small to mid-scale powder packaging operations ...more

19' 8” X 8.66 Tube Cutting Fiber Laser with FastCut CNC Control, Tube Pro Nesting Software, Air Blower, Transformer for 3,000 Watt Fiber Laser, Two Year Warranty, Installation and Training., Max Loading Length: 98.42” ~ 236” Auto Length DetectionCircular Tube Cutting Diameter Range:.5” - ...more

Multi-Sensing Wide Board Scanner w/ Defect Optimization Using Scatter, Color, and 3-D Profiling Ulti-Vision Software Provides Ability to Produce Rip Solutions while Considering the Cut-Off Solutions at the Same Time! Ulti-Vision Displays Color Images with Actual Defects and Real-Time Solutions, so the Operators See ...more

Brand: L&A ENGINEERING, Condition: USED, "AS-IS", Model: T-903, Capacity: 350 GALLON, Serial: 10227, Power Rating: -, Weight: APPROXIMATELY 2,000 LBS. W/ SKID, Category: COOKERS, ERC #: MO-2521, Job #: 069, Additional Notes: BATCH KETTLE BLENDING COOKER THAT WAS BEING USED FOR JAMS AND JELLIES. UNIT IS A COOKER ...more

6K Laser| 5x10 worker area, Laser Power: 6,000 W (6kW, Laser Source: Fiber, Work Area: 5' x 10', X-axis: 120 in., Y-Axis: 60 in., Z-axis: 2.75 in., Steel (max. cutting sheet thickness):.98 in, Stainless steel (max. Cutting sheet thickness): 1.2 in, Aluminum (max. cutting sheet thickness): 1.2 in, Max Workpiece ...more

BOILERSMITH 400 HP BOILER, WOOD-FIRED -- Wood-Fired BOILERSMITH Boiler fitted with CHALLENGER Combustion Unit. -- Complete with the following major components and s: -- 250 PSIG design pressure. -- BOILERSMITH Boiler Model HRT2H8-2600SF-XW-250 with 2600 Sq. Ft. boiler surface area. -- Fuel can vary in moisture up to ...more

, Average Positional Spread +/- 0.001", Dimensions (L x W x H) 385.82" x 208.66" x 78.74", Laser Output 4000W, Max Material Thickness 0.787", Max Travel In X 122.20", Max Travel In Y 62.20", Max Travel In Z 4.80", Overshoot Range In X -0.630" to 3.465", Overshoot Range In Y -0.748" to 2.401", Overshoot Range In Z ...more

FIBER LASER CUTTING MACHINE Laser Power 6KW Centrifugal Fan Included Freight&Tariff Included Installation & Training Cost Included Spare laser headed Included Air Compressor Included Transportantion By Sea dust collector with spark trap Included consumable pack Included Loading Container 1*40'HQ Payment ...more

Item #: BV6674 BAUERMEISTER UT-02 UNIVERSAL GRINDING MILL, -- SERIAL: 740393 -- 10HP -- 10,250 RPM -- PREMIER ROTARY AIRLOCK -- AUGER FEEDER -- WGT: PRICE: FOB CLEVELAND, OH - - - $8,350.

Catalog :, 3 Axis Servo (Feed, Camshaft, Slide)Easydor Multivision GageLaser Probe2 Plane Straightener, Location: Lake Forest.

This is a package deal that includes a beautiful ABS blast booth with U shaped partial floor recovery system-16'W x 14'H x 18'D. Under power and running, all documentation available., Manufacturer ABS/GFS Model Blast Room Year 2019 Condition Good Stock Number BR 6003 # of Nozzles 1 Reclaim Type Auger U ...more

Work Envelope, Cutting area: 51 × 51 (1300 × 1300 mm), Z-axis travel: 4 (100120 mm), Laser System, Laser power: 2000W (options 15004000W typical), Laser type: Continuous wave fiber laser (~1.07 m wavelength), Laser source: IPG / Raycus / Max Photonics (varies by build), Beam quality.

Pre Owned Cincinnati CL6 Laser, Serial Number 48891, Maximum Sheet Size 4’ X 8’, Sheet Configuration Dual Pallet, Laser Design Flying Optic, Resonator Wattage 1500 W, Fanuc 16L Control, Fanuc C1500 Laser Fast Axial Flow Resonator, Dynamic Power Control, Auto Lube, Fume Blower, Lasermech Non-Contact Cutting ...more

GORBEL GLCS 1000-20-30 1/2 Ton Bridge Crane System w/ HARRINGTON EQ HoistGorbel ceiling supported bridge crane system with the following: -- 30’+/- Runways and (1) 1/2 Ton steel bridge girder at 20’ +/- OAL -- (6) Hanger Assemblies -- Festooning and Festoon Trolley -- Hoist Trolley -- End Trucks.Includes: ...more

, Heidenhain iTNC 530 ERGOline control with a 19" screen, Electronic hand wheel for control, BLUM laser tool measuring, Rinsing pistol, 580 PSI CTS (Coolant thru the spindle) with paper band micro filter, Chip conveyor, Machine is offered subject to availability, prior sale, and terms & conditions of FRANKE CNC ...more

Washer 3 stage : wash,rinse,dry Auger Type Drum 15" dia. Drum 9 1/2' L Pitch 6" Helix 1 1/2" Hole Perforations 3/16" Electrics AC Motor and Controls.

Year: 2005, Make: Bystronic, Model: BySprint Pro 3015, Laser Power: 4400 WattMaximum Sheet Size: 60" x 120"X Travel: 120"Y Travel: 60"Weight: TBDDimensions: TBD, Bystronic Control, 4400 Watt Resonator, Chiller, Dust Collector, Shuttle Table, Load/Unload Automation System, *Personal inspection of ...more

CAPACITY:, Laser Output: 5000 Watts, X-Axis Travel: 160", Y-Axis Travel: 80", Z-Axis Travel: 4.5", Max. Material Thickness (Mild Steel). 1": 1", Max. Material Thickness (Stainless): 1", Max. Material Thickness (Aluminum): 1", Max. Material Thickness (Copper/Brass). 0.40":, Max. Positioning Speed (Simultaneous). 11,140 ...more

2023 G3015XPRO-M 20KW RAYCUS Dual Pallet 2G Fiber Laser, RAYCUS 20kw, HSG Control, HSG Nesting, HSG P20 Cutting Head Auto Focus, 5’x10’ Dual Pallet Fiber Laser, Voltage Stabilizer and 480-380V Transformer, Dual Pallet, LOW HOURS:, TOTAL POWER ON TIME 3525, TOTAL LASER ON TIME 562.

WHOLESALE EQUIPMENT RESOURCE, LLC. = AMERICA'S STEAM KETTLE HEADQUARTERS !, "AMERIFAB" CUSTOM S/S BULK FOOD HOPPER HOLDING STORAGE UNIT w/ VARISPEED AUGER DRIVE, (STOCK # 772C)., FAMOUS MAKER "AMERIFAB" CUSTOM BULK FOOD COMMODITY MATERIAL AUGER STAINLESS STEEL HOPPER HOLDING STORAGE UNIT w/ VARISPEED DRIVE, (STOCK ...more

Commercial Manufacturing, 304 stainless steel delumper. a 96" long x 48" wide x 76" deep, 175 ft³, bulk stainless steel product hopper with lift out safety grate, 84" long pin bar agitation with14 – 12" long x 1 1/4" dia pins, 84" long x 12" diameter bottom auger. Pin ...more

Inventory No. 0421-044-0003 Manufacturer Burton Model No. EC30-30 Name Burton Ec30-30 Mixer 100 Cu Ft Arrival Date 05-05-2021 Dimensions L x W x H (inches) Unavailable Capacity 100 CU FT Weight (lb.) 4800 Category Chemical Processing Condition Used, tested Available Quantity 1 Item Used 100 Cu Ft, Carbon Steel ...more

Toresani Pavan Model MT600 is a tortellini pasta machine designed to produce small tortellini pastas. It s a nine-punch system and is constructed with mild steel dough sheet rollers. The unit comes with a hopper feeder for easy dough input and two sets of double dough sheet rollers, measuring 4.687" diameter X 23.5" ...more

ENERPAT Car Recycling Plant is a complete 20-30 TPH solution designed for processing depolluted end-of-life vehicles (ELVs), vehicle bodies and automotive scrap. The system combines powerful shredding technology with multi-stage metal separation to recover valuable ferrous and non-ferrous metals while reducing ...more

Ligna 20" x 36' Top Arbor Gang Saw, Quick change door, Chrome press rolls, 14' Infeed with positioning system, Cant turner, Liaser lights with controls, The first photos shown are of the system installed. The resaw has been dismantled and ready to load, as shown in the last photos.

1500 Watts2500 Watts74.2"Up to 300 Hz.

used- southern packaging model im7-12 horizontal form fill seal. pouch size range: 2.25"-5.75"w x 2"-9.5"h. speed rated up to 100 ppm. last used in pharmaceutical application. includes auger filler.

Inspect in plant under power by appointment, 36 position tool changer, BLUM Laser tool measurement, 7 station Dynafix Pallet changer, Step-Tec Swiss made 42,000 rpm HSK-E40 spindle, HEIDENHAIN iTNC 530 CNC control, Preparation for graphite extraction.

, used Sweco Rotary/Centrifugal Sifter model K300C. Screen is approx. 5" dia x 12" L. 4" inlet, 4" screw auger feeder. Unit comes with MAC hopper with level indicators, bin vibrator and impulse valve. Previously used in sanitary application for coffee grinds., SWECO K300C, Type Unit. ROTARY SIFTER, Material. Stainless ...more

Selling one (1) new unused Falltech 4' to 6' adjustable restraint lanyward with steel snap hooks. Model: 8209., Static Strength5,000 lb min. ANSI User Capacity130 to 310 lb max. OSHA User Capacity130 to 425 lb max. WebbingPolyester; 5,000 lb min. static strength ConnectorsPlated alloy steel; 5,000 lb min. static ...more

12.6” Diameter X 29.5’ Long Automated Fiber Tube Laser Cutting System with the Fastcut CNC Control System, 2KW, 3KW, 4KW and 6KW IPG Laser Power Source Options, Standard with 3 Chucks Instead provides for additional Length Capability and NO Remnant. Tubes Up To 8.86" and Optional 12.2" Round Tube Diameter ...more

Stock #: JB-B-220030, Location: Southeast, Brand: HK, Model: FL3015, Year: 2017, Crating Fee: Not Available, Loading Fee: Rigging Required, Laser Output: 6000 Watts, Table Size: 5' x 10', X Axis Travel: 120", Y Axis Travel: 60", Z Axis Travel: 7", Siemens Controls, IPG 6000 Watt Fiber Laser Source ...more