Buy or Sell Your Bullard Vtl

G&L 72, TABLE DIAMETER 72″, MAXIMUM TURNING DIAMETER 84″, MAXIMUM HEIGHT UNDER CROSS RAIL 96″, RAM VERTICAL TRAVEL, X-AXIS 62″, VERTICAL TRAVEL OF CROSS RAIL 54″, RAM TRAVEL, LEFT OF CENTER 54.5″, RAM TRAVEL, RIGHT OF CENTER 48.5″, RAM CROSS SECTION 7.875″, TABLE ...more

Giddings & Lewis 108” / 120” Live Spindle VTC, Model: 517 Series, Stock #: 10799-I, Serial No.: 517-0006-93, Year: 1993, Table Diameter.108”, Swing Diameter (max.).120”, Height Under Rail (max.).72”, Table Speeds, (2 gear ranges).To 150 RPM, Rail Elevation Travel.28”, Ram Travel ...more

Max. Swing: 63"Max. Workpiece Height: 43.3"X-Travel: 80.7"Z-Travel: 31.5"ZB-Travel 19.7"Under Rail: 51.2"Max. Spindle Speed Table: 400 RPMTable Diameter: 53.1"C-Axis Increments:.001°Spindle Taper: Capto C8 TaperMax. Live Tooling Spindle Speed: 3000 RPMTool Changer: 24-ATCMain Motor: 50 HPTable Load Capacity: 17600 ...more

Used Summit SC2000. Machine Tool Bids offers plenty of Vertical Turret Lathes and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Summit SC2000 or any of our machines., MACHINE, Table Diameter: 78.74", Maximum Turning Diameter: 82.67", Maximum Height Under ...more

216" O-M CNC Vertical Boring Mill (1995), (Preliminary), Table Diameter: 216", Max Turning Diameter: 236", Max Turning Height: 145", Vertical Travel of Crossrail: 102", Vertical Travel (Z) Ram Head: 79.9", Table Speeds: 0.3 - 45min-1 RPM, Rail Elevation Speed: 250mm/min, Rapid traverse: 196 IPM, Main Motor Drive: 100 ...more

Make: You JI, Model: 1000ATC, Year: 2009, Machine Location: Upon Request, Table Diameter 39.37″, Maximum Swing 53.14″, Maximum Cutting Diameter 43.30″, Maximum Cutting Height 35.43″, Rail Travel 20″, Ram Stroke, Z-Axis 31.49″, Table Weight Capacity 8,800 Lbs, Table Speed, 2-Ranges ...more

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 21i-T CNC Control, 10,691 Hours Cutting ...more

RAFAMET KCF 400, S/N 126-270, M/N KCF 400, TABLE DIAMETER: 142" (3200mm), SWING: 162" (4050mm), HEIGHT UNDER RAIL: 157" (3978mm), VERTICAL TRAVEL OF RAM: 56" (1422mm), TABLE H.P. 75 HP (VARIABLE SPEED DRIVE), MAX RPM: 40 RPM, MAX PART WEIGHT: 25 TONS, CUTTING HEADS: 3-, 2 VERTICAL RAMS, 1 SIDE HEAD, LEFT RAM SWIVELS ...more

Table Diameter: 236.22", Max. Part Swing: 314.96", Ram Stroke: 98.42", Max. Height Under Rail: 196.85", Cross Rail Vertical Travel: 127.95" (9.84" x 13 Steps), Table Speed: 40 RPM, Table Weight Capacity: 60 Ton, Feed Rate, X/Z Axes: 0 - 118.11 IPM, Ram Dimensions: 15.74" x 15.74", Table Motor: 268 HP, Fanuc 31i-A CNC ...more

72", GIDDINGS & LEWIS CNC CONTROL W/MILLING SPINDLE IN RAM, MAKE: G&L (R&D&D) HYPRO DUAL RAM CNC VERTICAL BORING MACHINETABLE DIAMETER: 72"MAX. SWING: 74"UNDER RAIL: 67"MAX. HEIGHT UNDER RAIL: 58"LEFT RAM TRAVEL: 30"RIGHT RAM TRAVEL: 50"LEFT RAM MILLING/DRILLING 20 HPSPEEDS 2 RANGES 5-3000 RPMMILLING ...more

Table Dia 192 ", Swing 204 ", Height 120 ", Age/Rtf 1975, Model 300 Series, Control GE FAUNC 15-TT, Additional Info:, GE FANUC 15-TT CNC Controls Set of Four 14" Face Plate Jaws (For use with Plain Table) RPM Indicator Table load Meter Flood Coolant, Mist Coolant, Chip Conveyor, Chip Guards H. & L.H. Ram Type with ...more

Table Diameter: 86.6", Maximum Swing: 98.42", Maximum Height Under Rail: 72.8", Maximum Height Under Tool Block: 61", Cross Rail Travel: 47.2", Vertical Travel of Ram: 59", Horizontal Travel of Ram: -51.2"/+55.1", Ram Cross Section: 8.26" x 8.26", Table Speeds: Inf Variable: 1 - 300 RPM, Max Cutting Force: 11,240 Lbs ...more

MANUFACTURER Giddings & Lewis MODEL NUMBER 514 YEAR OF MANUFACTURE 2025 (Originally built in 1988) CHUCK SIZE 84” CHUCK TYPE 84” Tee slotted with 4 top jaws MAXIMUM SWING 96” HEIGHT UNDER RAIL 84” MAIN RAM TRAVEL X-90” z-62” SIDE HEAD RAM TRAVEL X-30” z-75” Spindle ...more

CAPACITY:, Table Diameter: 144", Maximum Swing: 151", Maximum Height Under Cross Rail: 120", Maximum Under Ram or Tool Block. 112": 112", Ram Stroke: 96", Table Capacity: 100 Ton, Table Speeds, Infinitely Variable:.8-50 RPM, Table Speed Ranges: 2, Feeds, Infinitely Variable:.0005-2.0 IPR, Giddings & Lewis 8000 CNC ...more

Product, Table Diameter 192" Maximum Swing 204" Height Under Cross Rail, Max 120" Height Under Cross Rail, Min 24" Maximum Under Ram or Tool Block. 108" 108" Ram Stroke 96" Ram Horz Travel 110" Table Capacity 175 Ton Table Speeds, Infinitely Variable.8-50 RPM Table Speed Ranges 2 Feeds, Infinitely Variable.0005-2.0 ...more

SWING: 63", TABLE DIAMETER: 49", TABLE LOAD CAPACITY: 11,000 LBS., MAXIMUM CUTTING DIAMETER: 53", MAXIMUM CUTTING HEIGHT: 47", MAXIMUM TABLE SPEED: 350 RPM, CROSS RAIL VERTICAL TRAVEL: 29.5", X AXIS TRAVEL: 36.6", Z AXIS TRAVEL: 33.5", FANUC 18-T CNC CONTROL, 12 POSITION ATC, CHIP CONVEYOR, *All are subject to buyer ...more

Table Diameter: 49.21", Maximum Part Swing: 62.99", Maximum Cutting Height: 55.11", Table Speed: 1 - 360 RPM, Table Weight Capacity: 8 Ton, Cross Rail Travel: 27.55", Ram Stroke: 35.43", Milling Spindle Speed: 3,000 RPM, C-Axis Rotation:.001, Ram Cross Section: 8.66" x 8.66", Fanuc 32i-A CNC Control, Ram with 24 ...more

Yama Seiki GV1600 Vertical Turning CenterTABLE DIAMETER: 1,600 MM (62.99 INCH), HEAVY DUTY MANUAL INDEPENDENT 4 HARD JAWS, MAX. SWING DIAMETER: 2,000 MM (78.7 INCH), MAX. TURNING DIAMETER: 1,800 MM (70.8 INCH), MAX. TURNING HEIGHT: 1,300 MM (51.1 INCH), RAM STROKE (Z AXIS): 900MM (35.5 INCH), CROSS RAIL TRAVEL (W ...more

CAPACITY:, Table Diameter: 177.16", Maximum Swing: 216.53", Maximum Turning Height: 157.48", Ram Dimensions: 15.74" x 15.74", Taper in Ram: BT-50, Table Speeds, 2-Range: 1 - 60 RPM, Table Weight Capacity: 110,000 Lbs, Z-Axis Travel, Ram Stroke: 78.74", X-Axis Travel, Cross Travel: 111.81", W-Axis Travel, Rail ...more

Table Diameter: 157.48", Maximum Swing: 196.85", Maximum Work Height: 98.42", Table Speeds, 2-Speeds: 1 to 50 RPM, Table Weight Capacity: 88,000 Lbs, Machine Weight: 255,000 Lbs, TRAVELS:, X-Axis Ram Horizontal: -7.87" to +165.25", Y-Axis Ram Vertical: 59.05", W-Axis Cross Rail:, Ram Cross Section: 13.78" x 13.78" ...more

Yama Seiki GV2000M Vertical Turning Center with Milling, TABLE DIAMETER: 2,000 MM (78.7 INCH), HEAVY DUTY MANUAL INDEPENDENT 4 HARD JAWS, MAX. SWING DIAMETER: 2,050 MM (80.7 INCH), MAX. TURNING DIAMETER: 2,000 MM (78.7 INCH), MAX. TURNING HEIGHT: 1,280 MM (50.3 INCH), RAM STROKE (Z AXIS): 900MM (35.5 INCH), CROSS RAIL ...more

, Twin Vertical Rams, (2) 12-Station Automatic Tool Changers, 60" 3-Jaw Hydraulic Chuck w/ 9 Radial Slots for Top Jaws, Giddings & Lewis 8000 4-Axis CNC Controls, Chip Conveyor, s:, Twin Vertical Rams, (2) 12-Station Automatic Tool Changers, 60" 3-Jaw Hydraulic Chuck, Giddings & Lewis 8000 4-Axis CNC Controls ...more

"Used Gray 144" Series 300 Double Column VTL, manufactured in 1973, available for sale by Silverlight CNC, Inc. With a table diameter of 144" and a swing of 151", this VTL offers impressive capacity. It has a work height of 126" and is powered by a robust 125 hp motor. With a low RPM of 54, it provides precise and ...more

Experience precision engineering with the used 2022 MOMENTUM MVL 16M CNC 3-axis vertical turning center. telescopic guards, chip conveyor, and Fanuc OITC CNC control, this unit s a 63" table diameter and 74 hp main motor AND 30 hp milling spindle at 455 ft-lbs. of torque. Right angel head and through the milling ...more

MANUFACTURER.: GIDDINGS & LEWIS, MODEL.: VTC 3000 [CNC], YEAR.: 2009, TABLE TYPE.: ROHM, TABLE OUTER DIAMETER.: 118.11", MAX. RING OUTER DIAMETER.: 137.8", TABLE BEARING SYSTEM.: HD TAPER ROLLER THRUST, TABLE LOAD CAPACITY.: 132,277 LBS., LOW TABLE RPM RANGE.: 1–37, HIGH TABLE RPM RANGE.: 1–120 ...more

HWACHEON VT 950 CNC Vertical Turning Center, 2019, s 32" table diameter, 43.3" swing, 33.46" turning height, FANUC control, 800 RPM table speed, 40 hp motor, 10 position turret and 16-position ATC. Includes chip conveyor and hand-held MPG, 2019 HWACHEON VT 950, Table Diameter. 32", Swing Diameter. 43.3", Turning ...more

For sale: The O-M NEO-10EXII (Alpha Series with Live Spindle) VTL. s a swing of 55.1", work height of 31.5", and table diameter of 43.3". Capable of handling workpieces up to 6,600 lb. Maximum spindle speed is 2,500 RPM, driven by a 50 hp spindle motor. The table can reach speeds of 420 RPM. Advanced CNC (FANUC) ...more

Stock #: 181250007, Location: Moraine Ohio, Brand: DMG Mori Gildemeister, Model: CTV 160 2nd, Year: 2015, Approx. Shipping Weight: 8,000-9,000 kg (17,600-19,800 lbs), Approx. Shipping Dimensions: Approximate shipping dimensions: Length: 3.4-3.6 m (11.2-11.8 ft) Width: 2.2-2.4 m (7.2-7.9 ft) Height: 2.8-3.0 m (9.2-9.8 ...more

DOOSAN V450, TABLE DIA 15″, SWING 22.83″, POWER 30 hp, RPM 2,500 RPM, CONTROL CNC (CONTROL FANUC 21-TB), CHUCK SIZE 15, CONTROL FANUC 21ITB, RAPID TRAVERSE (X/Z) 787, SPINDLE DIAMETER 3.5, SPINDLE MOTOR CONT. 30, SPINDLE NOSE A2-8, SPINDLE SPEED 2500, SWING 22.83, TABLE SIZE 10 TO 12, TRAVEL (X) 9.45 ...more

Hyundai HITV5R CNC VTL (subject to buyer verification): MAX. TURNING DIAMETER: 21.65″ MAX. TURNING LENGTH: 23.6″ MAX. SWING: 31.5″ CHUCK DIAMETER: 15″ (MAX. 21″) TRAVEL – X AXIS: 12.8″ – Y AXIS: 24.6″ RAPID TRAVERSE RATE (X/Z): 787/709 IPM SPINDLE MOTOR: 30 HP ...more

MANUFACTURE MOTCH & MERRYWEATHER MODEL NUMBER 225D CHUCKS 18" 3- JAW HYDRAULIC HORSEPOWER 50 HP SPINDLE SPEEDS 5 TO 867 RPM AXIS TRAVEL Z - 18”, X - 20” TURRETS 2 INDEPENDENT 6 STATION TURRETS CONTROL FANUC AXIS DRIVES FANUC SWING 35”, FULL ENCLOSURE, 2- FANUC CNC CONTROLS, CHIP CONVEYOR, COOLANT ...more

Maximum Swing: 35", Max Turning Diameter: 31.5", Maximum Turning Length: 31.5", Table Diameter: 18", X-Axis Travel: 17.3", Z-Axis Stroke: 31.9", Spindle Speeds: 2-2000 RPM, Spindle Motor: 40 HP / 29 HP, Spindle Nose: A2-11 (ISO), Milling Spindle Speeds: 3000 RPM, Milling Spindle Motor: 10 HP / 7 HP, C-Axis:.001 ...more

Doosan Puma V8300LVertical Turret LathesFanuc Oi-Plus ControlX Axis – 19.5 inZ Axis – 31 inSpindle Speed – 2000 rpmSpindle HP – 50Shank – BMT-KEYTurret Stations – 12 SlotBoring Bar Diameter – 2.5 inMax Turing Diameter – 32.7 inMax Turing Length – 29.5 inMax Table ...more

MOTCH 135, Manufacturer: Motch, Model No.: 135, Chuck: 30” 3-Jaw, Horsepower: 50 HP, Distance Under Turret: 40” / 16”, Overall Machine Height: 150" (12'-6") approx., Axis Travels: Z = 24”, X = 28”, Turret: (1) 6 Station Turret, Control: Fanuc CNC, Axis Drives: Fanuc AC, Swing: 46” ...more

ACCUWAY UV100 VTL with Milling, CHUCK / TABLE DIA 40″, SWING 43.3″, MAXIMUM CUTTING DIAMETER 39.3 in, MAXIMUM TURNING LENGTH 27.5 in, VERTICAL TRAVEL X 30.1 in, HORIZONTAL TRAVEL Z 31.3 in, RPM 1,200 RPM, POWER 37 kW, CONTROL CNC (Fanuc Oi-TD Control), DIMENSIONS 138″ x 94″ x 160″, WEIGHT ...more

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 31i-MA Series CNC Control, PCMCIA Card ...more

2015 Hyundai WIA LV1100R CNC Vertical Lathe for sale. s 40" chuck, max swing 50", and 12 turret stations. FANUC 32IA control, chip conveyor, and full enclosures. Perfect for heavy-duty machining tasks., 2015 HYUNDAI WIA LV1100R, Table Diameter. 40", Table Load Capacity. 4,400 lb, Swing Diameter. 53.3", Turning Height. ...more

Make: DMTC, Model: CGK5112JD, Year: 2020, Machine Location: Upon Request, Manual Chuck Diameter: 39.37″, Max swing diameter of workpiece: 47.24″, Max Machining Diameter: 47.24″, Max Machining Height:39.37″, Max Workpiece Weight: 11023.11 lbs., Worktable Speed Step: Stepless, Table speed range: ...more

TABLE DIAMETER: 1,250 MM (49.2 INCH), MAX. SWING: 1,450 MM (57 INCH), MAX. TURNING DIAMETER: 1,400 MM (55.1 INCH), MAX. TURNING HEIGHT: 900 MM (35.5 INCH), HEAVY DUTY MANUAL INDEPENDENT 4 HARD JAWS, SINGLE COLUMN FIXED TYPE CROSS RAIL, WORK-PIECE SPINDLE SPEED: 1 ~ 350 RPM, FANUC AC 60 HP (30 MIN) WORK-PIECE SPINDLE ...more

Manufacturer Giddings & Lewis Model number 513-VBM Year of manufacture 2025 3 Jaw hydraulic chuck 60” Max turning diameter 72” Height under tool 72” Spindle motor 75 HP AC VARIABLE SPEED Spindle speeds 10-272 RPM Number of tools 5 Programable axis X 40” LEFT OF CL / 40” RIGHT OF CL / ...more

CAPACITY:, Table Diameter: 59.05", Maximum Turning Diameter: 70.86", Maximum Turning Height: 59.05", Maximum Height Above Table: 67.71", Ram Stroke: 35.43", Table Speeds (2-Ranges): 2-250 RPM, Maximum Weight Capacity: 17,625 lbs, Fanuc 18-T CNC Control, 4-Chuck Jaws, Ram W/ 12 Position Automatic Tool Changer, Chip ...more

Make: Momentum, Model: MVL-16M, Year: 2018, Machine Location: Upon Request, Max Turn Dia: 78.74″, Max Turn Height: 63.18″, Table Diameter: 62.99″, Max Workpiece Weight: 22,000lbs, Spindle Power: 73 HP, Spindle Speed: (Low) 65 RPM / (High) 280 RPM, Milling Spindle Power: 25 HP, Milling Spindle Speed: ...more