Buy or Sell Your Barrett Machines

Brand/Model: Sulzer Bingham 4x6x10 MSB : Used Sulzer Bingham 4x6x10 MSB, API 610, BB3 centrifugal pump with the following s: • Case material: • 6 stage • impeller • 6” 150# RF suction flange • 3” 600# RTJ discharge flange • CCW Rotation • Weight • Dims ...more

Brand/Model: United 4MS-B : Used United 4MS-B, API 610, BB1 pump with the following s: • Carbon steel case material • 2 stage • 10 3/16" 316SS impeller • 6" 300# RF suction flange • 4" 300# RF discharge flange • CW Rotation • Weight • Dims Applications: Dewatering ...more

Used 6" Barrel For Davis Extruder 30:1 L/D Ratio Non-Vented 9.55" OD 176" Long Flanged End.

Used 45mm Theysohn Twin Screw Extruder, model TSK-N-045, co rotating screw, 36:1 L/D ratio, electrically heated, water cooled barrel, (1) feed, (2) top and side vented, (1) top vented, (5) non-vented barrel sections, 500 rpm screw speed, 60 HP dc motor with controller, control panel with (8) barrel zones, (1) die zone ...more

Make: Milacron, Model: MTS 90, Year: 2015, Machine Location: North Carolina, 90 Ton, 9.6oz /272 Gram Barrel, 45mm Feed Screw, Tie Bar Spacing 15.94″x 14.17″, Platen Size 24.02″ x 22.24″, Max Daylight 28″, Prior Use: Nylon and Polypropylenes, Hours 9882, Dimensions: 4.5’ wide x ...more

Fitzpatrick Malaxator, mixer-extruder. 10" diameter X 6-1/2' long sanitary stainless barrel with split opening for cleaning. Model L-800, serial number 121. Last used on continuous mixing of bread dough in a crouton plant. Has capability of direct steam injection and liquid addition. Less main motor and screw ...more

used-b&p process equipment ko-kneader system, model ck-60-12d. system consists of: b&p ko-kneader, 60mm screw diameter, 12:1 l/d, barrel vertically split. cored shaft with segmented screw elements and liners, barrels are water heated cooled. 75 hp dc-motor with drive. screw speed up to 500 rpm; brabender type ...more

Brand/Model: Sulzer Bingham 3x6x9C MSD : Used Sulzer Bingham 3x6x9C MSD, API 610, BB3 pump with the following s: • Carbon steel case material • 7 stage • 9.375" impellers • 6" 300# RF suction flange • 3" 600# RF discharge flange • CCW Rotation • Weight • Dims ...more

2021 Precihole BRVN 12/1-800 Single Spindle Button Rifling Machine - Brand new!, Precihole BRVN 12/1-800 Single Spindle Button Rifling Machine, New: 2021, Rifling Size Range: 0.1" - 0.5", Number of Spindles: 1, Maximum Rifling Depth: 24"/40"/48"/60", Barrel OD Range: 0.47" - 2.16", Barrel Clamping System: 3-Jaw Chuck ...more

One (1) used W & P Twin Screw Extruder. Werner & Pfleiderer Model ZSK-30, built 1980 36" long barrel, 3 top vents 6 kW DC drive Segmented screws Co-rotating die On cabinet, with casters.

Brand/Model: Byron Jackson 3x4x9D-9P- DVMX : Used Byron Jackson 3x4x9D-9P- DVMX Pump, 9 stages, API 610, BB3, with the following s: • Stainless Steel case material • 9-stage • 4" 600# RF suction • 3" 600# RF discharge • CCW Rotation • Weight: 6,680 lbs.- Whole skid • Dims: ...more

SWING OVER BED ------------------------- 16 in, SWING OVER CROSS SLIDE ----------------- 10 in, THROUGH HOLE --------------------------- 1 3/4 in, SPINDLE SPEED (NUMBER) ----------------- 24, SPINDLE SPEED (RANGE) ------------------ 16-1,010, CROSS SLIDE TRAVEL --------------------- 80 in, TAILSTOCK BARREL DIAMETER ...more

Brand/Model: United 10X17 DVS : Used United Pump 10X17 DVS, API 610 BB1 pump with the following s: • S-4 Case material • Single stage • 17.25" impeller • 12" 600# RF suction flange • 10" 600# RF discharge flange • Mechanical Seals • CCW Rotation • Weight 6,800 LBS ...more

Make: American Kuhne, Model: AK 120MM 30:1 Rebuild, Year: 2013, Machine Location: Illinois, -Screw Size: 120 mm, -L/D Ratio: 30:1, -Motor: 200 HP, -Digital Controls, -42″ Centerline Height, -Electrically Heated, -Air Cooled Barrel, -Electrical Requirements: 480 V.

Patterson Kelley Co. Inc. Shell and Tube Heat Exchanger. S/N: 205007 Std.Pa. 31924. Tube material: carbon steel. Number of passes: 5. Number of tubes: 196. Tube dimensions: 5/8 in. dia. x 9 ft. L. Heat transfer surface area: approx. 289 sq. ft. Shell MAWP: 300 PSI @ 250 F, Shell MDMT: 250 F @ 300 PSI. Tube MAWP: 150 ...more

Make: LAARMANN, Model: Ball Mill 150, Year: 2023, Machine Location: Upon Request, Max. volume of grinding barrel: 150 L, Dimensions: 1000 x 1180 x 1250 mm, Weight: Approx. 750 kg, 220 V / 3 Phase / 60 Hz.

Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.

8” Egan / Beringer Pelletizing Line Line Consists Of The Following Pieces: 8” Egan Extruder, 36:1 L/D, 21.36:1 Gearbox Ratio, Lufkin Gearbox, Air-Cooled Barrel, 300 HP Slide Plate Screen Changer Xaloy WRP36S Water Ring Pelletizer, 3 Row Die With 135 Holes, Gala 3016 ECLN Spin Dryer Witte Classifier ...more

Brand/Model: Ingersoll Rand 4x3x8 VOC : Used Ingersoll Rand 4x3x8 VOC Centrifugal pump with the following s: • case material • Single stage • 7.625" impeller • 4" suction flange • 3" discharge flange • CW rotation • Weight • Dims Applications: Dewatering Pump ...more

Used 6" Gloucester water ring pelletizing line, with 6" Gloucester extruder, model 266-001, 30:1 L/D, air cooled with Contracool and blower, jacketed feed section, feed hopper, vented barrel, with control panel, machine serial# 266-33392-01, built 1990. Gneub rotary filter screen changer, model SF90, serial# 1190-866. ...more

Brand/Model: Sulzer Bingham 10x14x16.5 HSB : Used Sulzer Bingham 10x14x16.5 HSB, API 610, BB1 pump with the following s: • case material • Single stage • impeller-Double suction • 14" suction flange • 10" discharge flange • CCW Rotation • Weight 8,000 lbs • Dims ...more

Brand/Model: Sulzer Bingham 3x4x8.75 MSC : Rebuilt/ Unused Sulzer Bingham Pump 3x4x8.75A MSC, API 610 BB3 pump with the following s: • 410 SS case material • 7 stage • 8.71" impellers 10% chrome material (single suction) • 4” ANSI 600# RF suction flange • 3” ANSI 600# RF ...more

Brand/Model: Byron Jackson 4x6 OLMX : Used Byron Jackson 4x6 OLMX, API 610, BB3 pump with the following s: • Cast steel case material • 4-stage • impellers • 6" 900# suction flange • 4" 900# discharge flange • CCW Rotation • Weight • Dims 67"Lx33"Wx49"H ...more

Used 1.25" Killion single screw extruder, 24:1 L/D, electrically heated, air cooled barrel, jacketed feed section, driven by 5 hp DC motor drive, on stand with control panel, includes stainless steel water bath with air wipe, less extruder screw, no blower or pumps, Killion serial# 14280.

CLEAN AIR AMERICA 4,000 cfm WeldStation Dual Booth with Collection System—reconditioned, Model: Weldstation Dual, Welding Booth Dimensions: 116" wide x 41" deep x 124" overall height, (2) work stations with Adjustable Height Work Table, Holds (4) cartridge filters Includes New AirMax Premium Media Cartridge ...more

Used 4 Liter AMK Extrusion Kneader Mixtruder, model VIU4, stainless steel construction, vacuum cover, approximately 8" x 8" x 7.5" deep mixing changer, tangential sigma blades driven by 2.2 kw motor drive, discharge extruder driven by 1.5 kw motor drive, jacketed bowl and extruder barrel, on base, serial# 12202, built ...more

used xchanger inc. aa-2750 air cooled heat exchanger skid dual units, 24" fan, 400 hp motor. aluminum plate-fins. 24" diameter fan, 8", 2" inlets/outlets. includes silencer rated 1.75 bar, driven by an approximate 400hp 3/60/460v 3575rpm motor. birkett 4p6h411422/ds safety relief valves. mounted on carbon steel frame. ...more

Make: Xinda, Model: PSHJ-50, Year: 2007, Machine Location: Ohio, Model: PSHJ-50, Barrel Diameter: 50mm, L/D Ratio: 40:1, Output Capacity: Approx. 500 kg/hr (material dependent), Screw Speed: Up to 500 RPM, Main Motor: 45 kW, Heater Power: 28 kW, Water Pump Power: 0.55 kW, Power: 460V / 60 Hz / 3-Phase, s:, Parallel ...more

Brand/Model: Sulzer Bingham 6x8x11D MSD : Used Sulzer Bingham 6x8x11D MSD, API 610, BB3 pump with the following s: • 12 chrome case material • 7 Stage (No rotating assembly) • 8" 900# RF suction flange • 6" 900# RF discharge flange • Mechanical Seals • CCW Rotation • Weight ...more

Make: Jonsen, Model: SGP800, Year: 2011, Machine Location: Upon Request, Working Width: 31.5, Maximum Part Thickness (Opening): 2″, Feed Speed: 2.6–16.4 FPM, Wide Abrasive Belt Grinding Station, Planetary Abrasive Barrel Station (4 Barrel Heads, 2 Rotate Clockwise, 2 Counterclockwise), Vacuum Conveyor Bed ...more

Brand/Model: Allis Chalmers 6x8x22 : Used Allis Chalmers 6x8x22, API 610, BB1 pump with the following s: • case material • Single stage • impeller • 8" suction flange • 6" discharge flange • CW Rotation • Weight • Dims 58"Lx41"Wx34"H Applications: ...more

Brand/Model: United 4x11 MSN-H : Used United 4x11 MSN-H, 4 stage, API 610, BB3 pump, with the following s: • Steel case material • 4 -stage, double suction • 6" 900# RTJ suction • 6" 900# RTJ discharge • CCW Rotation • Weight: 3,900 lbs. • Dims: 94"(L)x 37"(W)x ...more

Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 (9) 7" long jacketed barrel sections for heating and cooling, 3.5" diameter feed area with ...more

Used 72mm Jiangsu Xinda Twin Screw Extruder, Model PSHJ72 40:1 LD Ratio, 10 Elements, Port in Zone 5, Vent In Zone 8 110 Kw Main Motor(147.5 Hp) With AC Drive 500 RPM Screw Speed Has Clampshell Style Barrel Opening 11 Temp Zone, 1 Die Zone, 1 Pressure Readout 2.2Kw Material Feeder With Control Panel New in 2007 ...more

Used 3" Davis Standard Single Screw Extruder, Model DS-30, New in 1995 24:1 L/D Air Cooled Barrel, 4 Barrel Zone 7.42 Gearbox Ratio, 70hp Capacity with 1.25 Service Factor 40hp Baldor Vector AC Motor, 1180-3000rpm, With AC Drive Novus Temperature Controllers, 4 Barrel Zone, 3 Die Zone Screw Speed & Motor Load ...more

Merrill Model 72-16AH, automatic, stainless steel, inline tablet / capsule dumper, slat counter and filler rated from 20 to 100 bottles per minute – depending materials, size container and count. Will accept (72) x 16" wide slats. 32" long x 20" wide x 13" deep vibratory product hopper, dust ...more

used leistritz zse 18 ph-40d twin screw extruder system pharma lab scale line with k-tron feeder & pelletizer. (2) co-rotating 18 mm diameter side by side screws, 40:1 l/d ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. driven by a 4.7 kw (6.3hp) -400/230-volt ac drive motor ...more

Bonnot single screw extruder, model 4", featuring a mild steel barrel and screw with an approximately 4" diameter x 46" long jacketed barrel. The extruder has an 8" x 16" hopper feed size and is driven by a 15 HP, 230/460 Volt, 3-phase, 60 Hz, 1800 RPM motor through a Dodge gearbox with a 13.66 gear ratio. The system ...more

"60MM Berstorff Co-Rotating Twin Screw Extruder, 34:1 L/D Ratio, 500 RPM Screw Speed 7 Barrel Zones, Vented At Barrel Zone 4 and 6 1 Screen Changer Zone Electrically Heated, Water Cooled 200 HP Reliance VXS AC Inverter Duty Motor S/N 90-2-E0.8765/97 Order Number 1242 HUT New In 1997 No Drive Or Temperature Control ...more

VERSON WHEELON DIRECT ACTING HYDRAULIC Fluid Cell FORMING PRESS, Model 8600R-36-92, FLEX-DIE RUBBER PAD, FLUID FORMING, CAPACITY TONNAGE 8,600, FORMING PRESSURE thru 5,000 P.S.I., TRAYS: Two, BOTH Tray Size at Top 36" x 92", Right Tray Area at a 4½ inch Depth 30.2" x83.2", Left Tray Area at ...more

6” Sterling / Gala Pelletizing Line Line Consists Of The Following Pieces: 6” Sterling Extruder, 38:1 L/D, 9.946:1 Gearbox Ratio, Air-Cooled Barrel, 600 HP Slide Plate Screen Changer Gala Underwater Pelletizer, SLC-6 Cutting Head, Gala 8.2BF Spin Dryer, Tempered Water System Witte Classifier Currently ...more

Cherry Burrell, Model 624 Thermuter, twin tube stainless steel scrape surface heat exchanger with amount of product per minute – depending on materials and application. (4) 1½" tri-clamp product connections, (4) 2" NPT media connections and (2) scrappers per barrel powered by a 5 HP drive with ...more

DISA S-750 Bag House Dust Collection SystemIncludes -- 7-1/2 HP - 1,750 RPM TEFC Motor; (24) cloth material filter bags; (3) plastic waste collection bags; (3) clamps for easy removal of waste bags. -- s -- 243 Sq./ft. of filter media; easy installation, typically (1) hour; quiet operation; (3) waste discharge points; ...more

55MM Leistritz ZSE 50 GG Counter-Rotating Twin Screw Extruder 300 RPM Screw Speed 44:1 L/D Ratio 10 Barrel Sections, Water-Cooled Barrel, Non-Vented 46KW(62HP) Baumuller DC Motor, 112 AMPS DOES NOT INCLUDE DC DRIVE MISSING HALF OF BARREL HEATER IN ZONE 7 10 Barrel Zones, 3 Die Zones Eurotherm 2208e Controllers -SOME ...more

For sale is four (4) new unused Browning Split Taper Bushings. Part number: P1 1 7/16"., Bushing Size P1 Bore Type Inch Bore Diameter 1.4375 in Keyway Size 3/8 x 3/16 Material Sintered Steel or Ductile Iron Flange Outside Diameter 3.0000 in Flange Thickness 13/32 in Flange Type Solid Flange Length Through Bore 1.9375 ...more