Buy or Sell Your 600 Ton Presses

Pressing Force: 180 TonStroke Length: 5.9"Stroke Speed Range: 70 - 200 SPMShut Height Adjustment: 3.9"Shut Height on Bed (SDAU): 20.6"Bed Area (L-R x F-B): 74.8" x 33.5"Upright Opening: 24.8"Slide Area (L-R x F-B): 74.8" x 33.5"Motor Power: 75 HP, Willet Transfer SystemFour Piece High Tensile Cast Iron FrameMounting ...more

3" HILL ACME XN UPSETTER, S/N M17010, YEAR 1942, DIE DEPTH. 22", DIE WIDTH. 14", DIE LENGTH. 19-1/4", DIE OPENING. 5", TOOL HOLDER POCKET WIDTH. 5", STOCK GATHER. 7-5/8", HOLD. 2", STROKE. 12", HEADER SLIDE LENGTH. 80", HP. 30, LBS. 95,000, FORGING PRESSURE. 630 TONS, L x W x H. 184" x 101" x 85".

ONE PREOWNED 1000 TON SOUTHWARK HYDRAULIC PRESS, S/N 6478-2, Capacity 1000 tons, Bed Area 46” x 55”, Ram Area 24” Cylinder, Bolster Area F-B, L-R 48” x 42”, Stroke 32”, Daylight-Ram to Bolster 54”, Speed-Advance Down 40 IPM, Speed-Advance Up 30 IPM, Main Motor 125 HP, Press ...more

Scotchman 110 Ton Hydraulic Wide H-Frame Press, Model ProPress 110W, SKU # 3014002, Capacity 100 Tons, Motor 3 HP, RPM 3000, Ram Speed – Approach 17 ipm, Ram Speed – Press 5 ipm, Ram Speed – Return 21 ipm, Open Height, Minimum 5”, Open Height, Maximum 34 3/4”, Stroke 15”, Lateral ...more

BLOW 400 TON SSDC PRESS, STOCK# 14434J, MDL# SC2-400-60-42, S/N# SDG-400-431-97, NEW 1997, CAPACITY 400 TON, STROKE: 14", SHUT HEIGHT OVER BOLSTER : 24", SLIDE ADJUSTMENT 14" (MOTORIZED), BED SIZE: 60" LR X 42" FB, SLIDE AREA 60" LR X 42" FB, SPEED 25-45 SPM, WINDOWS 28", EQUIPPED W/, LINK OMNILINK PRESS CONTROLS, AIR ...more

2014 Dayton Heavy Duty Pneumatic Die Cushion, Model HC36, 102 tons, 12" stroke. s 200 PSI max pressure, 55"L x 40"W x 44"H, and comes with a 500-gal Manchester tank. Like-new condition with a 36" cast iron piston., Tonnage: 102 @ 200 PSI, Maximum Pressure: 200 PSI, Pin Pad Size: 41", square Mounting Holes: 48"c.c. x ...more

MINSTER E2-300 SSDC PRESS, S/N 18290, STOCK# 14145J, MODEL E2-300, S/N 18290, 300 TON, STROKE 8", RAM ADJUSTMENT 6", SHUT HEIGHT 29", BED AREA 72" L-R X 42" F-B, SLIDE AREA 72" L-R X 42" F-B, T-SLOTTED, T-SLOTTED BOLSTER, SPEED 50-00 SPM, SCRAP CONVEYOR, WORK PLATFORM, AIR CLUTCH & BRAKE, AIR COUNTERBALANCES ...more

VERSON Straight Side Press for Sale Manufacturer: Verson Model: Verson 100-B2-96 Press Condition: Very Good Location: Columbia, TN Warehouse Year: 1975 Machine #: 6002 CAPACITY: 100 TON STROKE: 4″ SHUT HEIGHT TO BED: 16″ (SDAU) BED AREA: 96″ X 30″ (RL X FB) SPEED: 55 SPM RAM ADJUSTMENT: ...more

CAPACITY200 TON STROKE6" MAX SHUT HEIGHT TO BED21" SDAU BED AREA60" X 48" (RL X FB) SPEED60 - 120 SPM SLIDE ADJUSTMENT6" MOTORIZED SLIDE AREA60" X 48" (RL X FB) T-SLOTTED BOLSTER PLATEAPPROX. 5" THICK X 60" X 48" (RL X FB) T-SLOTTED PLATE DISTANCE BETWEEN UPRIGHTS60" DISTANCE FLOOR TO BED32" WINDOW SIZE25" WIDE ...more

TONNAGE ------------------------------------------- 100, TONS, DISTANCE BETWEEN HOUSINGS ------------------------- 10 ft5 in, BED/RAM OVERALL LENGTH ---------------------------- 12 ft, HEIGHT ABOVE FLOOR -------------------------------- 108 in, WEIGHT -------------------------------------------- 21,000, LBS, BED WIDTH ...more

300 TON PRESSMASTER ROLL-IN TABLEFULL 4 AXIS POWERED STRAIGHTENING PRESS RATED CAPACITY.″00 TONSWIDTH BETWEEN UPRIGHTS. 60"DEPTH BETWEEN POSTS. 24-1/4"MAXIMUM RAM TO TABLE.″1.6"STROKE. 20"TABLE TRAVEL.″3"FLOOR TO TABLE TOP. 26-3/4"CYLINDER BORE SIZE. 14"PRESSING ...more

110 Ton X 10’ 2” Hydraulic 3 - Axis CNC Press Brake with NC-9EX Controller (3 - Axis), Backgauge, Full Length Foot Treadle, Flush Floor Design and Remote Handwheel., Capacity: 110 Tons, Overall Bending Length: 122”, Distance Between End Frames: 100”, Stroke: 3.9”, Open Height: ...more

max. capacity 300 ton - lifting capacity - 38 tons, max. stroke 26", daylight to bed 14" TO 40", bed area 72" x 48" (RL X fb), ram AREA 67" x 42" (RL X FB), speeds (INCHES PER MINUTE) 960 RAPID ADVANCE / 104 PRESSING / 830 RETURN, cylinder size 17.5" dia. BORE, FLOOR TO BED HEIGHT 27", PRESS CONTROLS ALLEN-BRADLEY ...more

Capacity200 Ton stroke6" shut height to bed22" sdau bed area54" X 30" (RL X FB) Speed35 spm SLIDE AREA36" x 24" (RL X fb) (t-slot) SLIDE ADJUSTMENT8" (air motor) bolster size4.75" x 54" X 30" (H X RL X FB) (T-slot) Distance between uprights32" distance floor to bed38" THROAT DEPTH16" clutchFEDERAL air clutch & ...more

Make Proserv Crane (www.proservcrane.com) Capacity 120 / 25 Tons Capacity (Bridge) 120 Tons Capacity (Main Hoist) 120 Tons Capacity (Aux Hoist) 25 Tons Span 76' 0" Available Lift 30' Class D Crane Headroom 123" Wheelbase 72" Bogeys, 264" Total Overall End Truck Length 324" Total Year 2014 Control Radio w/ Backup ...more

CAPACITY 100 TON, STROKE 8", MAX. SHUT HEIGHT TO BED 20" SDAU, BED AREA 60" X 36" (RL X FB), SPEED 40-80 SPM W/REEVES DRIVE, RAM AREA 60" RL X 36" FB T-SLOTTED, RAM AJUSTMENT 6" MOTORIZED ADJ., BOLSTER SIZE 60" X 36" (RL X FB) X 4" THICK T-SLOTTED BOLSTER PLATE, WINDOW SIZE 19" WIDE X 15" HIGH, CLUTCH CLEARING AIR ...more

, Retractable tie bars, Operational Conditions Good, Imperial Metric Tonnage 2,200 T 1,995.809 t Shot Size 413 oz 11,708.3 g Year 1997 1997 Control CNC (Camac 486C) CNC (Camac 486C) Tonnage 2200 ton, Shot Size (Oz) 413 Oz, Tie Bar Spacing 72.4" x 63.7", Platen Size 101.18" x 92.72", Max Daylight 135.43", Corepull 2 ...more

SERIAL. 1751MODEL. 150CAPACITY. 150 TONSTROKE. 18-1/8"AREA OF BED. 57-1/2" X 12-1/4"OPENING IN BED. 10"DISTANCE BETWEEN UPRIGHT. 48"OPENING IN UPRIGHTS FRAMES. 12-1/2"BED ADJUSTMENT. 11"HEAD TRAVEL LEFT & RIGHT. YESOPEN HEIGHT. 0 TO 62"ROD DIAMETER. 3-3/4"PENDANT CONTROLS. YESPHASE. 3MOTOR HORSEPOWER. 3.

Tonnage 300, Stroke 16 inches, Shut Height 39 inches, Adjustment 8 inches, Bed Size 96" LR x 48" FB, Ram Area 96" LR x 48" FB, SPM 20-40 VSPM, Standard, 300 ton Capacity, 16" Stroke, 39" Shut Height, 8" Motorized Adjustment, 96" LR x 48" FB Bed Area, 96" LR x 48" FB Slide Area, 20-40 VSPM, Equipment and s, Air Clutch ...more

Tonnage 160, Stroke 5.12 inches, Shut Height 18.4 inches, Adjustment 3.9 inches, Bed Size 75" LR x 27.6" FB, Ram Area 59" LR x 22.8" FB, SPM 40-85 VSPM, Standard, Aida Press Model NC2-160 (1), 160 ton Capacity (Metric), 5.12" Stroke, 18.9" Shut Height on Bed, 12.4" Die Height on Bolster, 3.9" Motorized Adjustment ...more

110 Ton Single End Punch with 30” Throat Depth., Tonnage: 110 Tons, Throat Depth: 30”, Diameter Hole: 1.375” in 15/16”, Working Height: 44”, Stroke: 0 - 2.75, Full Stroke Per Min.: 12, Voltage: 220 / 440, Hyd. Oil Capacity: 24 Gal, Dimensions: 76” X 30” X 78” H, Weight: ...more

TONNAGE FORMING/PUNCHING 100/66 DISTANCE BETWEEN HOUSINGS 6' - 5" BED/RAM LENGTH 8 feet BELOW GRADE no WEIGHT 15000 pounds TOP BED HEIGHT 35 inches BED WIDTH 4 inches THROAT DEPTH 6 inches RAM STROKE (FULLY ADJUSTABLE) 6 inches OPEN HEIGHT 13 inches CLOSED HEIGHT 7 inches HORSEPOWER 15 HP RAM SPEEDS (IN INCHES PER ...more

Used Hitachi "H Series" air cooled chiller model RCUG 150AHYZ1. 103 tons. New 2011. Chiller utilizes R407C refrigerant, 380, 415 volt/50 Hertz electric. Unit is rated at 363 kW, 103 US rated tons, and 312,000, 180 kcal/hour. Has semi-hermetic screw type compressor model 60ASCCW-Z(2)., HITACHI RCUG 150AHYZ1.

Make: Accurpress, Model: 7606, Year: 1998, Machine Location: Texas, Capacity: 60 Ton x 72″, Distance Between Housing: 52″, Ram Stroke: 8″, Open Height: 14″, Closed Height: 6″, Throat Depth: 8″, Speeds: 130 IPM (Fast) / 25IPM (Slow), Motor HP: 10, Electrical: 230V / 3PH, Approx. ...more

Tonnage 60, Stroke 6 inches, Shut Height 17 inches, Adjustment 2.75 inches, Bed Size 32" x 21", Ram Area 24" x 14.25", SPM 90, Standard, Model# 6SS, 60 ton Capacity, 6" Stroke, 17" Shut Height on Bed, 2.75" Motorized Adjustment, 32" LR x 21" FB Bed Area, 24" LR x 14.25" FB Slide Area, 90 SPM, Equipment and s, Air ...more

1800 Ton 7-1/2" National Heavy Duty Upsetter MACHINE, MODEL NO. 7 ½, S/N 16155, SINGLE TOGGLE Capacity: (Metric Ton): 1800 Upset Rated Bar Diameter: 7 ½” 190.5mm Strokes Per Minute: 25 Stock Gather: 13" 330.2mm Hold: 6 ¼” 158.75mm Grip Opening: 9.5" 288.6mm Length x Height of Die ...more

used- 103 ton hitachi "h series" air cooled chiller model rcug 150ahyz1. chiller utilizes r407c refrigerant, 380, 415 volt/50 hertz electric. unit is rated at 363 kw, 103 us rated tons, and 312,000, 180 kcal/hour. has semi-hermetic, screw type compressor model 60asccw-z(2). built 2011. our freight specialists can ...more

1000Ton CMC Bliss with Colt Feedline Press Press Make – CMC Bliss Press Model – SE4-1000-144-72 Press Serial Number – H9875 Press Tonnage – 1000 Front to Back – 72” Left to Right – 144” Shut Height – Max 49” Min 34” with out Ram Riser Shut Height ...more

EquipmentIronworkersSunrise IW-110S Hydraulic IronworkerSunrise IW-110S Hydraulic IronworkerHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionNewQuantity1 availableRequest QuoteLoading.NewHave one to sell?Sell NowOverviewType:IronworkersManufacturer:SUNRISEModel:IW-110SStatus:For SaleThis model is in ...more

Straight Side Press • Used 500 Ton Press for Sale Manufacturer: Minster Model: Minster E2-500-48-48 Press Condition: Very Good Location: Columbia, TN Warehouse Year: 1972 Machine #: 8027 CAPACITY 500 TON STROKE 12″ MAX SHUT HEIGHT TO BED 28″ SDAU BED AREA 48″ X 48″ (RL X FB) SPEED 28 SPM ...more

MODEL E-150, CAPACITY 150 TON, BED SIZE 50"X 30", RAM SLIDE AREA 34" X 24", Y- SLOTTED BOLSTER 48" X 33" X 5" THICKNESS, BOLSTER 5", STROKE 6", MAX RATED CAPACITY.25 ABOVE BOTTOM STROKE, SPM 35, SHUT HEIGHT 20.5", MOTORIZED AIR RAM ADJUSTMENT 6", FLOOR TO TOP OF BOLSTER 41", HYDRAULIC OVERLOAD, OPERATOR CONTROL ...more

Table Diameter: 236.22", Max. Part Swing: 314.96", Ram Stroke: 98.42", Max. Height Under Rail: 196.85", Cross Rail Vertical Travel: 127.95" (9.84" x 13 Steps), Table Speed: 40 RPM, Table Weight Capacity: 60 Ton, Feed Rate, X/Z Axes: 0 - 118.11 IPM, Ram Dimensions: 15.74" x 15.74", Table Motor: 268 HP, Fanuc 31i-A CNC ...more

SERIAL. H70288, MODEL. C-110, CAPACITY. 110 TON, AREA OF BED. 26" X 42", AREA OF T SLOTTED RAM. 38" X 21", BOLSTER PLATE. T SLOTTED, STROKE. 6", SHUT HEIGHT. 17", RAM ADJUSTMENT. 4", STROKES PER MINUTE. 30-60, OPENING IN BACK. 23-1/2", AIR CLUTCH. YES, AIR BRAKE. YES, AIR COUNTER BLANCES. YES, AUTO LUBE. YES, PALM ...more

CAPACITY200 TON STROKE3" SHUT HEIGHT TO BED29-1/2" (SDAU) BED AREA72" X 36" (rl x FB) speed50 - 170 SPM slide adjustment8" (MOTORIZED) slide area72" RL X 36" FB (T-SLOTTED) BOLSTER SIZE6-1/2" X 72" RL X 36" FB(T-SLOT) WINDOW SIZE20" FB X 18" H DIST UPRIGHTS / FLOOR TO BED78" / 38" CLUTCHAIR CLUTCH & BRAKE ...more

Capacity 150 tons Max Rated Capacity (Above Bottom of Stroke) 172 Stroke 5 inches Shut Height 17.5 inches Slide Adjustment 5 inches Bed Area (L-R X F-B) 72" X 48" Slide Area (L-R X F-B) 72" X 48" Strokes per Minute 30 Rated Air Pressure 60 PSI Min. Air Pressure 35 PSI, * SHADOW II LIGHT CURTAINS, * FLOOR MOUNTS, * ...more

CAPACITY:UP TO 1000 TONS PER HOUR, CASTING:75 FEET, COMPATIBLE WITH 938K/M/NEXT GEN, CUTTING HEIGHT UP TO 55 INCHES, DRIVE: RUNS OFF CARRIER VEHICLE HYDRAULICS, 3700 PSI @ 50 GPM, FLAT CAST: RIGHT, 135-DEGREE ROTATION TO THE LEFT, FUSION INTERFACE, Online Owner's Manual, SIZE: 36 DIAMETER; 12 DEEP MINIMUM FAN ...more

Punching Force: 100 TonsPositioning Area (X x Y): 170" x 96"Max. Positioning Speed: 1200 IPMPositioning Accuracy: +/-0.005"Max. Blank Size w/o Extended Tables: 96" x 120"Max. Punching Diameter: 3"Max. Material Thickness: 1"Max. Workpiece Weight: 4900 lb.Punching Hit Rate on 1" Centers (10 Ga. Steel): 125 HPMTooling: ...more

Straight Side Press • Used 200 Ton Press for Sale Manufacturer: Niagara Model: Niagara SC1-200-30-36 Press Condition: Very Good Location: Columbia, TN Warehouse Year: 1966 Machine #: 8028 CAPACITY 200 TON STROKE 10″ MAX SHUT HEIGHT TO BED 26″ SDAU BED AREA 30″ X 36″ (RL X FB) SPEED 30 SPM ...more

FUKUI TTD1100T2 straight side press from 1990, offering 1,100 tons of power. s include air brake, clutch, counterbalance, and more. Bed size 157.48"x43.3", stroke length 11.81", and motor 200 HP., Brand: Fukui, Model: TTD1100T2, Tonnage: 1,100 tons, Stroke length: 11.81" (300mm), Die height: 27.55" (700mm), Slide ...more

AB500-12 PRESS BRAKE, KEY :, TONNAGE FORMING/PUNCHING: 500/330 DISTANCE BETWEEN HOUSINGS: 10’-5” BED/RAM LENGTH: 12’ WEIGHT: 75,000 LBS BED WIDTH: 14” BED HEIGHT: 38” OVERALL HEIGHT: 160” THROAT DEPTH: 10” RAM STROKE: 10” (FULLY ADJUSTABLE) OPEN HEIGHT: 20” ...more

CAPACITY200 TON STROKE8" MAX SHUT HEIGHT TO BED21" SDAU BED AREA48" X 30" (rl x FB) SPEED40 - 80 SPM SLIDE ADJUSTMENT10" MOTORIZED SLIDE AREA48" RL X 30" FB BOLSTER PLATEAPPROX 5" H X 48" RL X 30" FB DISTANCE BETWEEN UPRIGHTS48" DISTANCE FLOOR TO BED32" WINDOW SIZE25" W X 20" H CLUTCHINDUSTRIAL AIR CLUTCH & BRAKE ...more

SERIAL. PB51-114, MODEL. 150-12, CAPACITY. 150 TON, OVERALL LENGTH OF BED. 14', DISTANCE BETWEEN HOUSING. 12'6", STROKE OF RAM. 3", POWER RAM ADJUSTMENT. 5", DIE SPACE / OPEN HEIGHT (SDAU). 12", DEPTH OF THROAT. ** 18" **, STROKES PER MINUTE. 30, BACKGUAGE CONTROL. DYNABEND 3, LENGTH OF BACKGUAGE. 30", *** ...more

Tonnage 400 tons Hyd/Mech hydraulic Punching 260 BH (Distance Between Housings) 10' 5" Bed/Ram Length 12 feet Below Grade no Weight 58000 pounds Bed Height 38 inches Bed Width 10 inches Overall Height 144 inches Throat Depth 10 inches Ram Stroke (Fully Adjustable) 10 inches Open Height 20 inches Closed Height 10 ...more

Bending Capacity: 110 Tons Overall Length: 102" (Shorter/Longer Lengths Available) Distance Between Housings: 84" Stroke: 10" (Longer Stroke Available) Daylight: 18" (Larger Daylight Available) Throat Depth: 16" (Larger Throat Available) Approach Speed: 472 IPM Working Speed: 39 IPM Return Speed: 319 IPM Oil Tank: 45 ...more

AMADA RG 100-30, 110 Tons, 3 Axis, 122” Max Bend Length, Amada NC9EXII Control, Year New: 2000, Model: RG 100-30, Tonnage: 110, Max Bend Length: 122”, Max Stroke Length: 3.9”, Open Height: 14.57”, Throat Depth: 15.75”, Distance Between Frames: 100.39”, Control: Amada NC9EXII, Axis: ...more

Capacity: 150 Tons @ ½ ” off bottom, Model Number: SC2-150-72-36, Serial Number: 50559, Bed Area: 72” x 36”, Slide Area: 72” x 36”, Stroke: 8”, Adjustment: 9”, Shut Height: 25” SDAU, Strokes per Minute: 35-70, Windows: 22” wide x 15” high, Bolster ...more

8'x 12 GA ACCURPRESS 7608 60-TON CNC HYDRAULIC PRESS BRAKE - Accurpress 2-Axis CNC Back Gauge - Pedestal Control Stand w/Ram Control - 76" Between Housings - 8" Stroke - 10 HP Motor, 8 ACCURPESS 60-TON CNC HYDRAULIC BRAKE, Serial No 2958, Model 7608, ACCURPRESS 2-Axis CNC Controlled Back Gauge, Pedestal Control ...more