Buy or Sell Your 2500 KW Generators

2010 CAT C15 Heavy Duty Diesel Generator Set 500kW Tier 2 EPA Standby Rated 347/600V 1800RPM 60Hz 3Ph Factory Sound Attenuated Enclosure CAT EMCP 3.2 Control Panel, Oversized Batteries, Jacket Water Heater, Space Heater, Permanent Magnet Excitation, 10A Battery Charger, 800A UL 3 Pole CB, CSA Certified. TSSA Approved ...more

Caterpillar 2000 kW standby (1825 kW prime) diesel generator set, SN-SBJ00406. CAT 3516C engine rated 2937 HP at 1800 RPM, SN-SBJ00406, EPA Tier 2 emissions. 3/60/277/480V. 3000 Amp main-line circuit breaker. UL 2200 listed packaged gen set. EMCP 3.3 digital control panel. EnerGenius battery charger 20 Amp. Dual ...more

ID: 48" DIA X 48" HIGH, 2200 F, 440 VOLTS 250 KW 3 PHASE DIGITAL CONTROLS, BOTTOM LOAD VERTICAL VACUUM FURNACE WITH METALLIC HOT ZONE AND HEATING ELEMENTS HAVING A CAPACITY OF 1000 LBS @ 1000 C. HEATING ELEMENTS ARE MOUNTED IN THE FLOOR BELOW HEARTH, ON ROOF & SIDE WALL. POWER TO HEATING ELEMENTS IS THROUGH LOW ...more

Used Kohler 500REOZJB Generator Set; 2015 Model – 502 Hours Since New; 500kW Standby Rated; 480V; Sound Attenuated Enclosure; Digital Control Panel; 800A Breaker; John Deere 6135HFG75A Tier 3 Engine; Standby Accessories; Load Tested – In Stock, Generator Set: Manufacturer : Kohler Package Model : 500REOZJB ...more

This new Cummins DFEK diesel generator set is a modern industrial standby power system engineered for commercial, municipal, and mission-critical emergency power applications. The unit is rated 500 kW standby at 60 Hz, operating at 1,800 RPM, and produces 277/480V, three-phase power with a reconnectable alternator for ...more

SCM - ACTION TF 2500: Case Clamp (Automatic Feed Through) -- Max. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31.5") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 250 mm (9.8") high x 250 mm (9.8") depth. -- Working table height: 600 mm (23.6"). -- Max. ...more

2000kW Jenbacher J612 Natural Gas Generator, Make: JenbacherModel: J612Type: Natural Gas GeneratorYear: 2019 Hours: 17,000 Hours on MeterCondition: Used ConditionPortable/Stationary: StationaryEnclosure: (3) 40ft Long ContainersEngine: Jenbacher JMS612 GS-N.L, Generator: kW/kVA: 2MWRotation Speed: 1200RPMVoltage: 600 ...more

Cummins 1000 kW standby (900 kW prime) diesel generator set, model DQFAD, SN-I070105722. Cummins QST30-G5 NR2 engine rated 1490 HP at 1800 RPM, EPA Tier 2 emissions, SN-37226817. 3/60/277/480V. 1600 Amp main-line circuit breaker. PMG - permanent magnet generator. Oversized generator end rated 1150 kW. UL 2200 listed ...more

Cummins 500 kW standby (455 kW prime) diesel generator model DFEK SN-F130525884. Cummins QSX15-G9 engine rated 755 HP at 1800 RPM, SN-79669919, EPA Tier 2 emissions. 3/60/120/208V, 12 lead reconnectable to other voltages. 1600 Amp main-line circuit breaker. PMG permanent magnet generator. Oversized generator end rated ...more

Cat XQ2280 power module provides (NEW 2024 345 HOURS) up to 2 MW of standby power or 1825 kW of prime power. 277/480V, 60Hz, 3 Phase, @1800RPM. Includes: EMCP 4.4 Digital Controller, 4000Amp Circuit Breaker, Heavy Duty Air Cleaner, Turbocharger, Battery Charger, Charging Alternator, 1050 Gallon Double Walled Fuel ...more

This unit was built to heat large volumes of water on a temporary site. It can provide steam at a rate of 4,770 kW, or heat a liquid at a rate of 2,051 kW, or a combination of the two. The Power Flame boiler runs on No. 2 Oil or Natural Gas, providing flexibility., The unit is ideal for plant shutdowns, sea ring ...more

Automatic Downfeed CNC Touch Screen Milling Machine Model: MG-1000, It is Mech-Electrical highly integrated machine uses touch key and screen display. The milling plate longitudinal movement by servo motor, the spindle vertical movement and rotation controlled by servo motor, three axis linkage control, high ...more

Overview, This Caterpillar SR-4B Diesel Generator is a heavy-duty industrial power generation system designed for mission-critical applications requiring reliable standby or prime power. Manufactured by Caterpillar Inc., this sound-attenuated generator set s robust construction and professional-grade components for ...more

Available September 2025:, BlueStar MD1000-01 1000kW Standby Diesel Generator Set Mitsubishi S12H-Y2PTAW-1 - Tier 2 Engine 600/347V, 3-Phase 60Hz, 0.8Pf, Stamford S6LD-F-4 Alternator, AVR with PMG Excitation BlueStar DCP7310 Controller Level 2 Sound Attenuated Enclosure, 1200amp 3 pole 600Volt Breaker Block Heaters ...more

Hours: 2557 Condition: Used Make: Cummins Model: DQGAA kW: 1250 Rating: Standby Voltage: 347-600V Fuel: Diesel Make Year: 2010 1250kW Standby/1100kW Prime 347/600V, 3Ph, 60Hz, 1800RPM, Cummins Diesel Generator Set, C/W Cummins QSK50-G5 Tier 2 Engine, Genset Mounted Breaker, Cummins PowerCommand PCC2100 Genset Control ...more

This new 2025 Cummins DQFAD diesel generator set is a high-capacity industrial power system engineered for commercial, municipal, and mission-critical standby power applications. The unit is rated 1,000 kW standby at 60 Hz, operating at 1,800 RPM, and produces 277/480V, three-phase power. It is powered by a Cummins ...more

##SHREDDER##, 600mm x 500mm Shredding Chamber, (2) 15kW Electric Motors (30kW Total), (3) 220mm Blades, Model YYS-600, Approx 1TPH Per Factory (Material Dependent), ##HAMMERMILL##, 600mm Wide Crushing Chamber, Up to 1000kg/hr Capacity (Material Dependent), 1500Kg Approximate Overall Weight, ##AIR GRAVITY SEPARATOR## ...more

Year of Installation: 1978, Material width: 300 mm to 590 mm, Max Diameter: 2300mm, Thickness:.3 mm - 4 mm, Speed: 600 meters per minute, Winder Block I.D: 500 mm, Coil Weight: 15 ton, Separation force: 180 ton, Max Tension: 2000 kg.

250kW Cummins Diesel Generator, Make: CumminsModel: 250DFACCondition: Good Used ConditionHours: 942.2 HoursDuty: StandbyFuel: DieselStationary/Portable: Stationary - Skid Mounted, Engine: Cummins Diesel Engine Model LTA10-G1 (380HP@1800RPM)Year: 1992Oil: Capacity - 36 Liters (38 Qts.)Radiator: Air to Air, Coolant ...more

New Surplus Year 2017 Kohler 2MW Generator End, 1800 RPM / 60 HZ (1850KW CONT, 2025KW Standby), 1500 RPM / 50 Hz (1500 KW CONT, 1650 KW Standby), Multiple Voltages, -12470 / 13200 / 13800 Volts 60 HZ 1800 RPM, -11000 V 50 HZ 1500 RPM, Condition: New Surplus, Year 2017, FOB: Belgium, Wisconsin 53004 USA, Manufacturer: ...more

Cummins 250 kW standby (225 kW prime) diesel generator set model DQDAA, SN-D130490581. Cummins QSL9-G7 engine rated 464 HP at 1800 RPM, SN-73516878, EPA Tier 3 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 600 Amp main-line circuit breaker. PMG - permanent magnet generator. Oversized generator end ...more

2019 EYHER mobile hydraulic lift table, 5,000 kg capacity, IP55 industrial rating, heavy-duty European build ideal for production, assembly, or material handling environments., -YEAR 2019 REF. 6.30, -MOBILE CONFIGURATION, -CAPACITY: 5000KG 11023LBS, -MAX WORK PRESS: 120 BAR, -IP: 55, -WEIGHT: 2500KG, -TABLE WIDTH: ...more

Notes. Cummins 2 Yr 1000 Hr limited warranty. EPA Stationary Emergency rated for Standby use only.PowerCommand 1.1 digital control panel. EnerGenius battery charger. Coolant heater. Aluminum sound attenuated level 2 enclosure 180 MPH wind rating w/critical grade muffler., EngineBrandCumminsModelQSB7-G5 NR3Manufacture ...more

New Cummins 1000 kW standby (900 kW prime) diesel generator set, model DQFAD, SN-L250516246. Cummins QST30-G5 NR2 engine rated 1490 HP at 1800 RPM, SN-37297058, EPA Tier 2 emissions. 3/60/277/480V, 4 wire non-reconnectable to other voltages. 1600 Amp 100% rated main-line circuit breaker. PMG permanent magnet ...more

Quantity: 2 Units, Manufacture: Cummins WartsilaType: 18V.180Fuel: Natural GasDuty: Prime DutyYear: 1998Hours: Approx. 30,000 HourskW/kVA: 1250kW (1562kVA)Voltage: 347/600 VoltCurrent: 1503 AmpsFrequency: 60HzPhase: 3-PhaseCummins QSV91 Engines 1200 RPMNewage Stamford Generator EndsComes with: Main Panel Control Box ...more

YEAR: 2012, MANUFACTURER: Cummins, GENERATOR MODEL: 1000DQFAD, GENERATOR S/N: C120311657, ENGINE MODEL: QST30-G5 NR2, ENGINE S/N: 37253301, KW: 1000, KVA: 1250, VOLTAGE: 277/480v 3 Phase ~ 12 LEAD, AMPS: 1503.6, RPM: 1800, HZ: 60, HOURS: 2000, EPA: Tier 2, ENCLOSURE: Power Module, Load Bank Test Passed, Cummins 1000 ...more

- 300 HP dry grinding circuit - 12 TPH throughput- 300 TPD Production- Consists of sizer, screen, ball mill, classifier, and baghouseBritish Rema Ball Mill:- 2.5m x 3.8 m ( 8.2 x 12.5 ft)- Steel liners- End overflow discharge- 250 kW Motor with reducer drive and controls- Lubrication systems for gears and bearings ...more

NEW Caterpillar Model C15 Package Diesel Generator Set, EPA Standby, 277/480V or Change to 120/208V, EMCP 4.2 Generator Control Panel, Auto Start/Stop, Engine Safety Shutdowns, CAT LC7024J Permanent Magnet Generator, 12 Lead 105 Degree C with Space Heater, 2 x 800A LSI, 1 x 250A LSI Circuit Breakers, Electronic ...more

904708.008, Used Atlas Copco Model G110-8.5 air compressor., Pmax: 8.5 bar, 123 psi, 0.85 MPa, Qv: 313.3 l/s, 664 cfm, 18.8 m3/min, P motor: 110kw, 148 hp, N motor: max 3575, M net: 2000kg, 4409 lbs..

40" (1000 MM) LOEWER DISCMASTER 4TB-1000 THROUGH FEED ABRASIVE BELT DEBURRING & EDGE ROUNDING DISC GRINDER SANDER- 2012 - (4) 10 Motorized Disks - (2) Infeed Deburring & (2) Outfeed Edge Rounding, 40 (1000 MM) LOEWER DiscMaster THROUGH FEED ABRASIVE BELT, DEBURRING & EDGE ROUNDING DISC GRINDER SANDER, New ...more

Rasch, Model TR, tempering machine rated 200 to 2000 Kg capacity per hour – depending on materials and application. 38" diameter x 15" deep mixing chamber (70 gal), bridge mounted 1½ Hp auger / scrape mixer, with lift off cover, 10 Hp bottom auger drive and 1½" NPT discharge. Control ...more

Trefa Model 2000, dual head, stainless steel, continuous, mixing / aerating system rated from 100 to 2000 kg per hour, per head – depending on materials and application. 15-1/2" long x 10" ID dual, jacketed pin style rotor / stator closed production mixing heads used for higher degree of sanitation and ...more

used siemens stc-sv (08-8)-b two-stage centrifugal gas compressors 1479 kw, 12,327 m/h, 9 bar max. rated power 1479 kw. rated capacity 12,327 m3/hour. 0.2 barg inlet pressure. 3.7 discharge pressure 9 bar (135 psi) maximum allowable discharge pressure. driven via a flender tx45/6c1gearbox by an 1800kw motor, gas ...more

Swiss Type Automatic Screw Machine, 5-axis, used. Featuring 10,000 RPM main spindle, 5,000 RPM sub spindle, bar feed, LNS HydroBar, and three live tools. Power: 5 hp. Spindle hole dia: 0.709"., Material capacity: 3mm-18mm, Main spindle is full C axis, Main spindle speed: 200-10,000 RPM, Sub spindle speed: 200-5,000 ...more

NotesMultiple units are available., EngineBrandMTUModel12V4000Serial Number562000763Manufacture Date5/2001Fuel TypeDieselGovernorElectronicAir CleanerDry TypeStarter24 Volt Electric StarterAlternator24 Volt AlternatorCoolingRadiator CooledTier Rating1GeneratorBrandMarathonKW1300kVA1625RatingStand ByEnclosureSound ...more

Year: 1995, Production Capacity: 270,000 Tons / Year., Reheating Furnace: 50 Ton / H., Mill Arrangement: Horizontal, Billet Size:120 X 120 / 130x130 / 140x140 / 130x190 X 6000 Mm, Finished Products: 10mm to 32mm, Round Deformed Bar, COMPONENTS:, REHEATING FURNACE, (1) Pusher Type, Natural Gas, DANIELIi ROUGHING MILL ...more

ROTOX SMK 504 + RKS 32-23 + EPA 472 + WT 427 CNC Window Production LineGerman engineered CNC welding and cleaning line for PVC window production. Suited for mid to large production manufacturing environments and compatible with all PVC window profiles.Capable of all known profiles: rebate seal systems, middle seal ...more

New Cummins 500 kW standby (455 kW prime) diesel generator set, model DFEK, SN-F260563041. Cummins QSX15-G9 engine rated 755 HP at 1800 RPM, SN-80810250, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 800 Amp 100% rated main-line circuit breaker. PMG permanent magnet generator. Engine ...more

12 x 6.5 ft (4 x 2 m) ASEA single drum mine hoist, – Type HTDE-144 inch, – ASEA 2,100/4,080 kW, 1000 VDC drive hoist motor, – 2,000 feet per minute, – 3,000 foot depth, – For 1.75 inch diameter rope, – 66,000 Lbs. maximum static rope stress, – Double disc brakes on drum with ...more

Make: Atlas Copco, Model: ZT75FF, Year: 2016, Machine Location: Iowa, Equipment Overview, The Atlas Copco ZT75FF is a fixed-speed, oil-free rotary screw air compressor designed for continuous-duty, high-purity air applications. The FF (Full ) designation indicates an integrated air dryer for turnkey air quality ...more

New Blue Star Power Systems / John Deere 250 kW standby (225 kW prime) diesel generator set model JD250-02, SN-124223-1-3. John Deere 6090HF484 engine rated 422 HP at 1800 RPM, EPA Tier 3 emissions, SN-RG6090L155897. 3/60/120/208V, 12 lead reconnectable to 480V and other voltages. 1000 Amp circuit breaker. PMG - ...more

NotesCummins 2 Yr 1000 Hr limited warranty. EPA Stationary Emergency rated for Standby use only.PowerCommand 1.1 digital control panel. EnerGenius battery charger. Coolant heater. Aluminum sound attenuated level 2 enclosure 180 MPH wind rating w/critical grade muffler., EngineBrandCumminsModelQSB7-G5 NR3Manufacture ...more

NotesRebuilt Caterpillar 3512C 1100kW, 346/600 Volt, 0 Gallon Fuel Tank, None, EPA Tier 2, CAT Warranty, Kato Gen End is rated at 1365kW, 1950 kVA, at 1200RPM., EngineBrandCaterpillarModel3512CSerial NumberLLA01078-RFuel TypeDieselGovernorElectronicAir CleanerDry TypeStarterAir StarterAlternatorNoneCoolingRadiator ...more

MTU Onsite DS00500 Diesel Generator Set Year: 2011Condition: UsedHours: 610, Power & Electrical Standby Rating: 500 kW, Prime Rating: 455 kW, Phase: 3 Phase, Voltage: 480 V, Frequency: 60 Hz, Speed: 1800 RPM, Digital Panel, Auto Start/Stop, Battery Charger, Circuit Breakers, Configuration Open skid, Cooling & ...more

NotesDOM 7/1996. Unit has a 50 gallon UL listed Day tank. Genset will be cleaned, inspected, and load-tested., EngineBrandCumminsModelVTA28-G5Serial Number25218460Fuel TypeDieselGovernorElectronicEngine Arrangement1651Air CleanerDry TypeStarter24 Volt Electric StarterAlternator24 Volt AlternatorCoolingRadiator ...more

Green Industrial purchased this 1944HP Kohler KD Generator Drive Engine as new surplus. This engine has been stored in a temperature controlled warehouse since new. Never installed., CONDITION: New Surplus Diesel Generator Engine, 1800 RPM or 1500 RPM 60 HZ or 50 HZ Capable (Set for 1800RPM 60HZ), FOB: 281 Commerce St ...more

CAPACITY 3 MM - 8 MM @ 600N/MM2, ROTATION INFINITE, FEED SPEED UP TO 120 M/MIN, BEND BACK CLEARANCE 600 MM, BENDING HEAD UP/DOWN STROKE 120 MM, BENDING HEAD STROKE TO TOP MAX 25 MM, AHL 41 B POWER PAYOFF, -1500 KG CAPACITY, -0-80 RPM, -1000MM TOP PLATE DIAMETER, -MAXIMUM WIRE DIAMETER 10MM, VARIOUS SPARE PARTS AND ...more

New Cummins 1000 kW standby (900 kW prime) diesel generator set, model DQFAD, SN-F260561167. Cummins QST30-G5 NR2 engine rated 1490 HP at 1800 RPM, SN-37299440, EPA Tier 2 emissions. 3/60/277/480V, 4 wire non-reconnectable to other voltages. 1600 Amp 100% rated main-line circuit breaker. PMG permanent magnet ...more

Brand/Model: SolarSet 32-GTP-22.34-0-2-F : 32- Panel 22.34 kW Premium Grid-Tie Solar System • (32) 698 Watt (BSTC), Bifacial Monocrystalline Solar Panels, Industrial Grade. • (1) Fronius Inverter, UL 1741 Certified, Nema 4x, Includes DC disconnect. Capable of online monitoring if connected to the internet. ...more