Buy or Sell Your 200 HP VFD

New York Blower Size 34512, Type STL, Model AF-40, air inlet 18", outlet 14". Rated at 8,891 CFM at 91.1" SP at 59 degrees at 0.074 air density at 186 BHP. Driven by 200 HP, 3,575 RPM, 460- Volt motor with Frame 444TS. Mild steel construction, CW rotation orientation. Manufactured in 2013. Shop number 2013-022643-03. ...more

TRIpack Model ST175 Stainless Steel Shrink Steam Tunnel with 9.50" wide X 24 high chamber opening. Chamber is dual zone and measures 80 long, including (3) rows of (2) spray bars in each zone, spray bars are adjustable. Tunnel includes top mounted blower driven by 1 HP, 230/460 V, 3435 RPM, 3/60 Hz motor. Tunnel Model ...more

Stock #: 92499 Category: DC Motors HP: 800 RPM: 1150 Frame: B687ATZ Enclosure: DPFVBB Make: Reliance Arm Volts: 500 Field Volts: 300 Field Amps: 5.14/4.41 Field Winding: Stab Shunt Condition: Electrically O.K. Location: -, NC.

Siemens SINAMICS Multi-Drive Cabinet – 600A Main – (10) 37 kW VFDs – 2020, Late-model (2020) Siemens SINAMICS multi-drive control cabinet featuring ten (10) 37 kW variable frequency drives in a professionally engineered industrial enclosure., This is a complete, high-capacity drive lineup designed to ...more

Used Unique Mixers & Furnaces PVT mixtruder, type Masticator Mixer Extruder, 316 stainless steel product contact surfaces, 304 stainless steel non contact surfaces, model MME-3, 6 liter(1.58 gallon) total capacity, 3 liter(.80 gallon) working capacity, masticator blades, jacketed bowl rated 4 kg/sq centimeter(56 ...more

CONCEPTION CRP-180 Short Block Feeder Infeed Conveyor: -- About 4 m long X 1.2 m wide, 2-ply rubber belt, friction back with Photocell for automatic operation -- Short Block Feeder; Blocks to be 25mm longer than width -- 14' rotating carousel with adjustable speed via VFD with Motorized wheel to avoid blockage -- ...more

FES Package: Contract No: 96079132, Model No: 16S, Serial No: 96079132. FES Compressor: Model -16S,Serial No: 16S167LS, Test Pressure- PSIG, Leak: 313, HYD: 470. Ram Industries High-Efficiency Motor - Serial No: 1200361-01-PS-P, HP: 200, Volts: 230/460, Amps: 470/235, PH: 3, Hertz: 60, Duty: Cont, Bearing No: 63303 ...more

Stock #: 84026 Category: DC Motors HP: 600 RPM: 1750 Frame: 35509 Enclosure: DPFVBB Make: D-line Arm Volts: 500 Field Volts: 300 Field Amps: 4.4 Field Winding: Stab Shunt Condition: Electrically O.K. Location: Toledo, OH.

Brand/Model: Union TX-200 : Used Union TX-200 Pump make and model, pump with the following s: • 5” Stroke • 200 HP • Steel Billet fluid end material • 2.75" Steel plungers • 4” 150# RTJ suction • 3” 1500# RTJ discharge • 5.765:1 Ratio • Weight: • ...more

The IRM 8010 8 × 10 2-High Laboratory Rolling Mill is a precision-engineered rolling solution designed specifically for research, development, and small-batch production environments. Built on a robust industrial platform with laboratory-grade control and flexibility, this mill delivers repeatable, high-accuracy ...more

30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warranty—if it doesn’t work as described, we’ll make it right., Shipping & Freight Logistics, Freight Handling: Average lead time is 5 ...more

used ABB 20hp AC drives, ACH550-UH-031A-4, frequency drive 15kw/20 HP, amps 31, 480 volt, 3 phase, serial# 2083301888, UL listed, test run video available, 2 available.

Brand/Model: Bethlehem B-200-L : Used complete pump, power end is disassembled, has timing chain case approximately 3:1, 23" centers, steel billet fluid end with 3.25" colmonoy plungers. Capable of 344gpm @ 905psi with 3 3/4" plungers or 153gpm @ 2037psi with 2 1/2" plungers. Applications: Well ...more

Used 15 gallon Lee tri shaft Turbo Emulsifier reactor, model 15D12T, 316 stainless steel construction, approximately 18" diameter x 13" straight side, dish top, hemispherical bottom, rated 30 psi and full vacuum at 275 f internal, jacketed for 125 psi at 353 f, top entering twin motion agitator with sidewall scrappers ...more

SKU: 147156, Model: 20BE027A0AYNAND0, Condition: Used - Like New, Electrical :, Horsepower: 25 hp, Voltage: 600 volts, Phase: 3-phase, Amps: 27 amps, Dimensions: 16.00 (H) x 16.00 (W) x 46.00 (L) inches, Additional :, VFD: 20BE027A0AYNAND0, Time Delay Relay: 700-HTF22300MU120, Control Relay: 700-CF220, Fuse: AJT45.

SKU: 147155, Model: 20BE041A0AYNAND0, Condition: Used - Like New, HP Rating: 40 hp, Electrical :, Max. Voltage: 600, Dimensions: 13.00 (H) x 16.00 (W) x 46.00 (L) inches, Additional :, VFD: 20BE041A0AYNAND0, Time Delay Relay: 700-HTF22300MU120, Control Relay: 700-CF220, Fuse: AJT70.

30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warranty—if it doesn’t work as described, we’ll make it right., Shipping & Freight Logistics, Freight Handling: Average lead time is 5 ...more

Allen-Bradley ControlLogix PLC Cabinet – Logix5571 – EtherNet/IP – Thermocouple & Analog I/O – PanelView HMI, Industrial Allen-Bradley control cabinet featuring a ControlLogix Logix5571 PLC platform and PanelView operator interface., Configured for networked industrial process control with ...more

Round work capacity 22" Square work capacity 22" x 22" Table height 31" Max blade size 270" x 2" Blade speeds 40 - 300 SFM Drive motor 10 HP VFD Coolant capacity 30 Gallons Auto multi-indexing 0 - 34" Electrics 240 Volt, 3 Phase Approx. machine dimensions 141"L x 90"W x 96"H Approx. weight 12,500 lbs, Hyd-Mech Mit. ...more

Item 6205 - One (1) Used Farrel 15" Dump Extruder, drop extruder, hot feed extruder, feed opening 36" wide x 24.5" deep, stuffer 35" wide x 8" thick with 13" stroke, 95:1 total gearbox reduction (19.4:1 primary gearbox X 4.93 secondary gearbox), GE 200hp 1150/1800 RPM 500 VDC motor, enlarged feed section, pneumatic ...more

Allen-Bradley Circuit Breaker Style Soft Start, Serial No: 6504180832/400, Horiz Power: 1200, Type 12 Encolsure, 600 VAC, 3 Phase, C/W, 1- Allen-Bradley Breaker, 140G-M0X3, 600V, 800A Frame w/ 600A trip, 1- 400A Fuse Block, 1- SMC-Flex, Solid State Controller, Cat: 150-F251NCD, 200 HP.

Brand/Model: Benshaw Soft Start : Used Benshaw Soft Start, 150 HP at 480 volts, 180 amps, enclosure 4Dims (31"L x 16"W x 49"H) HP: 150 RPM: Volts: 460 Phase: 3.

OVERVIEW, NOTE: This is a Trane Ascend™ Air-Cooled Screw Chiller, 551 nominal tons of cooling capacity, manufactured by Trane Technologies. The unit is new and has never been installed. s two independent refrigerant circuits with R-513A refrigerant, 22 VFD-controlled condenser fan motors, and an IPLV of 18.92 ...more

Stock Width Capacity 24 inches, Max Stock Thickness Capacity At Full Width.125 inches, Stock thickness capacity:.125" x 24" Wide, Stock thickness capacity:.187" x 12" Wide, Entry and exit pinch rolls, Air operated entry pinch roll adjustments, Seven straightening rolls x 2.75" diameter, Adjustable stock width edge ...more

Used Cleaver Brooks Steam Boiler,Approx. 6,900 steam lbs/hr, 9,414,000 BTU/hr, Model CB-200-225S, 200 HP, MAWP 150 PSI, Fuel Natural Gas/Oil, Serial No L-102393, Boiler Weight 16,300 lbs, Built 2002, Cleaver Brooks 200 HP 150 PSI High Pressure Steam Boiler, Equipment, Manufacturer: Cleaver Brooks, Model: CB-200-225S ...more

used- cmd packaging systems model icon 380 vertical form fill & seal bagger. capable of speeds up to 120 cycles per minute. has a bag size range (with changeparts): 2.36" - 15.76" or 60mm - 400mm (width) x 2.36" - 19.6" or 60mm - 500mm (length). haas film registration and pull belt film drives. allen bradley logix ...more

Brand/Model: Hermetic CAM 60-3 : UNUSED SURPLUS Hermetic 3 stage centrifugal butane pump or propane pump in sealless can with 9.3" carbon steel impeller and integral 200 HP 3 phase, 460v, 3500 RPM electric motor. Applications: Dewatering Pump, Pipeline Filling Pump, Water Transfer Pump, Frac Water Supply Pump ...more

ORIGINAL 3579-22L Metal Cutting Radial Arm Saw (SD Series)SD Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass ...more

ITEM 2819: 20 HP SIEMENS ELECTRIC MOTOR FRAME 286T VFD RATED 1180 RPM, 20 HP, 230/460 V 3 PH 60 HZ, 54/27 A, 1180 RPM, 286T FRAME, VFD RATED, 506 LBS, PRICE FOB HAW RIVER, NC…………. $ 750.00.

Stock #: H0886 Category: DC Motors HP: 400 RPM: 1700 Frame: 250P Enclosure: DPFVBB Make: ABB Arm Volts: 485 Field Volts: 310 Field Amps: 5.0 Field Winding: Shunt Condition: Electrically O.K. Location: Toledo, OH.

Stock #: 82703 Category: DC Motors HP: 400 RPM: 300 Frame: 4566 Enclosure: DPFVBB Make: Electric Arm Volts: 500 Field Volts: 300/150 Field Amps: 25.7/7.8 Field Winding: Shunt Condition: Electrically O.K. Location: Toledo, OH.

used- gryphon biomass hot air belt dryer. model a.318 gas fired recirculating counter current air dryer; approx. 213 lbs/hr water evaporation rate; 18 l x 3 w dryer section; used for drying hemp w/ inlet moisture of 50-80% and outlet moisture of 7% to 11% moisture running at 3,000 lbs per 24 hours inlet and ...more

CADILLAC 40”/60” x 80”cc Gap Lathe 4” Bore #7861, ImperialMetricSwing 40" 1,016 mm Centers 80" 2,032 mm Spindle Bore 4" 101.6 mm RPM 400 RPM 400 RPM Dimensions 146” x 64” x 72” H 146” x 64” x 72” H Weight 14,000 Lbs. 14,000 Lbs. CADILLAC ...more

unused - abb acs880-37 ultra low-harmonic cabinet drive, model acs880-37-1110a 5+c129+g307+h359+k475+l505+r700. all-compatible industrial drive designed to tackle any of your motor-driven applications, in any industries, whatever the power range. compatible with virtually all of your processes, automation systems ...more

Capacity: 2000 TonStroke: 11.8"Shut Height: 43.3"Pressing Speed: 20 SPMIdling Speed: 60 SPMBottom Ram Size: 44.1" x 54.7"Main Wedge Top Surface: 40.9" x 55.3"Main Wedge Adjustment: 0.5"Mechanical Upper Ejector (Ram) Capacity: 10 TonMechanical Upper Ejector (Ram) Stroke: 1.2"Hydraulic Lot Ejector (Table) Capacity: 25 ...more

Technical, Capacity, Rectangular (h x w), Round, 90°, 20” x 30”, 20”, 45°, 20” x 19”, 20”, 30°, 20” x 12”, 14”, WE WILL WORK WITH HYDMECH DEALERS +ON THIS STOCK MACHINE Blade Size, 1 1/2” x 20’ 6”, Work Load, 8,000 lbs., Blade Drive ...more

Stock #: 81629 Category: DC Motors HP: 250 RPM: 1750 Frame: 506AY Enclosure: DPFVBB Make: Electric Arm Volts: 500 Field Volts: 300/150 Field Amps: 5.45/4.43 Field Winding: Shunt Condition: Electrically O.K. Location: Toledo, OH.

RT-200A Mobile Boiler Room, 200 HP, 150 PSIG, Natural Gas, No. 2 Fuel Oil Fired, Complete boiler room package is designed to be placed in service at customer specified location with minimal, on-site work., INCLUDES:, • 48' Enclosed semi-trailer, • (1) 200 HP York-Shipley firetube steam boiler, • 150 PSI ...more

70,000# x 72" Red Bud Recoiler and Coil Car, Model: RC 39-80, 20" Dia. x 79.5" Face Drum, Pads For 24" I.D., Hydraulic Grip & Expand, 250 Hp DC Motor (Less Controls), With Parker 400 HP Rated Solid State Drive, Brad Foote Reducer Rated At 300 Hp, 91.19:1 Ratio, Powered Holddown Roll, Sliding Base, Outboard Support ...more