Buy or Sell Your 1000 Ton Press Brake

MODEL #: 45G, SERIAL #: PN0168, 3" STROKE, 11" SHUT HEIGHT, 2.5" RAM ADJUSTMENT, 68 SPM, 28" x 18" BED, 17" x 13" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, INCH SINGLE AND CONTINUOUS MODES, YEAR: 2000, GOOD CONDITION.

MACHINE, Press Capacity: 50 US tons, Maximum bend length: 78.8", Vertical stroke of lower beam: 3.937", Between Housings: 59.9", Throat: 15.76", Stroke: 3.94", Open Height: 14.58", Hydraulic Capacity: 13.46 gallons, Rising speed of lower beam (in. /sec) at 60Hz: 2.323", Bending speed of ...more

Pre Owned Wysong MTH 350-144 Hydraulic Press Brake, Capacity 175 Tos, Overall Length of Bed & Ram 12’, Distance Between Housings 10’6”, Open Height 19”, Stroke 10”, Shut Height (SDAU) 9”, Throat 10”, Oil Capacity 99 US Gallons, Speeds, Rapid Approach 250 IPM, Press 15 IPM ...more

ORDER 45, 6' BED, 62" BETWEEN HOUSINGS, 3" STROKE, 12" SHUTHEIGHT, 3" POWER RAM ADJUSTMENT, 2 SPEED, MANUAL BACK GAGE SUPPORT, 30-45 TONS, AIR CLUTCH, AIR BRAKE, FOOT PEDAL, 3HP 230/460, 102" X 49" X 88" T APPROX, 7500 LBS APPROX..

CAPACITY39 US TON STROKE3.15" MAX DIE HEIGHT8.3" SDAU OVER 3.4" H BOLSTER BED AREA27.6" X 15.8" (rl x FB) SPEED100 SPM SLIDE ADJUSTMENT2.2" - MOTORIZED SLIDE AREA13.8" RL X 11.8" FB BOLSTER PLATE3.4" H X 27.6" RL X 15.8" FB DISTANCE BETWEEN UPRIGHTS / FLOOR TO BED17.25" / 28" CLUTCHKOMATSU AIR CLUTCH / BRAKE ...more

MODEL: 180 ST, SERIAL #: 180ST-10, 4" STROKE, 15" SHUT HEIGHT, 3.5" RAM ADJUSTMENT, 90 STROKES PER MINUTE, 50" x 28-1/2" BED AREA, 30" x 15-1/2" RAM AREA, AIR CLUTCH & BRAKE, PALM BUTTONS, 3.5" THICK BOLSTER, AIR COUNTERBALANCE, YEAR: 1977, RECIRCULATING LUBE SYSTEM, LINCOLN MODEL LBM-101 BRAKE MONITOR, INCH ...more

Make: Piranha, Model: Pro 2 100-8, Year: 2006, Machine Location: Texas, Capacity: 100 Ton, Bending Length: 96″, Distance Between Housings: 78″, Stroke: 8″, Open Height: 14″, Closed Height: 6″, Approach Speed: 210 IPM, Form Speed: 25 IPM, Return Speed: 225 IPM, Throat Depth: 10″ ...more

STANDARD INDUSTRIAL AB150-10 Hydraulic Press Brake: -- Forming / Punching 150 / 100 Tons -- Bed/Ram Length 10 ft -- Between Frames 8'-5" -- Open Height 13 in. -- Stroke 6 in. (fully adjustable) -- Closed Height 7 in. --Throat Depth 10 in -- Bed width 5" -- Bed height 38" -- Horsepower 20 -- Ram speed approach 109 ...more

SERIAL. 9461, MODEL. JL55-8, CAPACITY. 55 TON, OVERALL LENGTH OF BED & RAM. 8', DISTANCE BETWEEN HOUSING. 6'6-3/4", STROKE. 6", OPEN HEIGHT. 12", CLOSED HEIGHT. 6", THROAT DEPTH. 6", BED WIDTH. 4", PASS LINE HEIGHT. 32", ELECTRIC FOOT PEDAL. YES, DUAL PALM BUTTONS. YES, RAN SPEED RAPID ADVANCE. 130 IPM ...more

PROMECAM RG-80-30 used hydraulic brake available. Ideal for precision sheet metal bending tasks. Well-known for its reliability and performance in demanding environments. Secure this essential tool for your workshop today., Brand: Promecam, Model: RG 80-30, Capacity: 88 tons, Bending length: 10', Distance between ...more

Pre Owned Toyokoki HYB-17540 CNC Hydraulic Press Brake, Capacity 190 Tons, Overall Length of Bed & Ram 157.48”, Distance Between Housings 139.875”, Open Height 13.38”, Stroke 7.87”, Throat 15.748”, Working Height 35.9”, Bed Width 7.5”, Back Gauge Range, Speeds, Rapid ...more

SERIAL. 2341, MODEL. 710012, CAPACITY. 100 TON, YEAR. 1993, LENGTH OF BED AND RAM. 12', DISTANCE BETWEEN HOUSINGS. 10'6", BED HEIGHT. 34", STROKE. 8", OPEN HEIGHT. 16", CLOSED HEIGHT. 8", STROKES PER MINUTE. 13 @ FULL STROKE, THROAT. 10", RAM SPEED (FAST APPROACH). 115 IPM, RAM SPEED (SLOW BEND). 24 IPM, RAM ...more

Pre Owned Toyokoki HYB-60-20 CNC Hydraulic Press Brake, Capacity 72 Tons, Overall Length of Bed & Ram 78.74”, Distance Between Housings 66.3”, Open Height 11.4”, Stroke 5.9”, Throat 16.14”, Working Height 35”, Back Gauge Range, Speeds, Rapid Approach 22 - 4.2” Per Sec ...more

MODEL #: E-75, SERIAL #: 47509, 6" STROKE, 18" SHUT HEIGHT, 4" POWERED RAM ADJUSTMENT, 37" x 24.25" BED, 24" x 19.5" T-SLOTTED RAM, 2" T-SLOTTED BOLSTER, AIR CLUTCH & BRAKE, AIR COUNTERBALANCE, TRIAD BRAKE MONITOR, PALM BUTTONS, 90 SPM, MOTOR: 10 HP 230/460/3/60, 53" LR x 77" FB x 137" TALL, APPROXIMATE WEIGHT ...more

Weight29000 pounds, 230 TON X 10' CINCINNATI MODEL #230-8AS HYDRAULIC CNC PRESS BRAKE W/ UPGRADED CONTROLS: STOCK #19386 SERIAL. 43973 MODEL. 230ASX8 YEAR NEW. 1985 UPDATED TOUCHSCREEN CONTROLS. 2011 CAPACITY. 230 TON OVERALL LENGTH OF BED AND RAM. 10' DISTANCE BETWEEN HOUSING. 8'6" STROKE OF RAM. 10" OPEN ...more

Make: Accurl, Model: GP350T, Year: 2025, Machine Location: Upon Request, Delem DA58T CNC Control, X/R Servo Backgauge, Upgraded ECO Energy Savings Drive Standby Inverter, CNC Crowning System, Complete Set of Upper AND Lower tooling (4-way die), Quick release Style Clamps, Laser Safe system in front, and rear., Working ...more

Model 4000-17200 MX Tonnage 4000 tons, Model: 4000-17200 MX, Low Hours, Die change table included, Automation cell & robots included, Located in Spring Hill, Tennessee.

Remanufactured By Federal 11/2000, Serial#6A-672, Capacity: 70 Ton, Stroke: 4”, Adjustment: 3”, Bed Size: 33” lr x 25.5” fb, Ram Size: 24” lr x 12” fb, Air Clutch, Air Brake, Shut Height: 13.5, Speed: 95 SPM, Throat Depth: 13.5”, Precision Industries Brake Monitor.

Tonnage 32 tons Stroke 2 inches Ram Adjustment 2.25" Shut Height 9.5 inches Bed Size 30" x 16" x 2.5" Thick Bolster / 24" x 15" Bed Ram Size 15" x 10.5" SPM 100-200 Air Clutch (Yes/No) yes Air Brake yes Dual Palm Buttons yes Type (BG, Double Action, FW) flywheel Crank (Single/Double) single Type of CNC Control Inch ...more

4" STROKE, 13.5" SHUT HEIGHT, 3" RAM ADJUSTMENT, 75 SPM, 24" X 12" RAM, 25.5" X 33" BED, AIR CLUTCH, AIR BRAKE, 13.5" THROAT, 1975.

MODEL #: 810L, SERIAL #: L16104, 10' OVERALL BED LENGTH, 8'6" DISTANCE BETWEEN HOUSINGS, AIR CLUTCH & BRAKE, FOOT PEDAL, INCH / SINGLE / CONTINUOUS MODES, E-STOP, UPPER AND LOWER DIE HOLDERS, DRC BACK GAUGE, GOOD CONDITION.

SERIAL. 133612, MODEL. 10-240T, YEAR NEW. 2012, CAPACITY. 240 TON, OVERALL LENGTH OF BED. 120", DISTANCE BETWEEN HOUSINGS. 102", STROKE. 6", OPEN HEIGHT. 16", CLOSED HEIGHT. 10", THROAT. 8", WIDTH OF BED. 5", POWER FRONT READING BACK GAUGE. 5 TATION NC GO TO POSTIONER, POWER RAM ADJUSTMENT. 5", RAPID ADVANCE SPEED. 50 ...more

Durma 10′ x 192.5 Ton CNC Press Brake, AD-R 30175, Inventory # 9778-P, Model: AD-R 30175, S/N: 7333149384 “2014”, View the AD-R Series Here, Bending Force: 192.5 Tons, Bending Length: 10′ (120″), Distance Between Centers: 8′ 6″, Stroke (Adjustable): 10.4″, Open Height: ...more

Model 5, Capacity: 60 Ton Stroke: 4” Adjustment: 2.5” Bed Size: 29.5” lr x 18.5” fb Ram Size: 16” lr x 10” fb Shut Height: 12.5” Speed: 90 SPM Throat Depth: 10”, Air Clutch, Air Brake.

Capacity 70 Ton x 6' Tonnage 70 Ton Distance Between Housing 54-1/2" Type Hydraulic Stroke 6" Open Height 12" Closed Height 6" Ram Speed: Approach 44 IPM Ram Speed: Return 63 IPM Ram Speed: Press 0 - 44 IPM Bed Height 28" Throat 8" Back Gauge Travel 24" Safety Curtains No Hydraulic Pressure 2750 psi Horsepower 10 H.P. ...more

STANDARD INDUSTRIAL AB325-12 Press Brake: -- Forming / Punching Capacity: 325 / 230 Tons -- Distance between housings: 10'-5" -- Bed/Ram length: 12' -- Below grade: No -- Top bed height: 39" -- Bed width: 12" -- Throat depth: 10" -- Ram stroke: 8" (fully adjustable) -- Open height: 16" -- Closed height: 8" -- ...more

Preliminary :, 5.91" STROKE, 3.15" POWERED RAM ADJUSTMENT, 13" SHUT HEIGHT OVER BOLSTER, 35-80 SPM, 22.05" X 21.65" BED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, HYDRAULIC OVERLOAD, PALM BUTTONS, 1999, LIGHT CURTAINS, WELL MAINTAINED, CAME OUT OF RUNNING SERVICE!, AVAILABLE FOR INSPECTION UNDER POWER, AVAILABLE ...more

Overall Bed Length 16', Dist. Between Housings 12' 6", Bending Capacity 400 Tons, Capacity 10' X 1/2", Stroke 12", Ram Speed (Fast Press) 64 Ipm, Ram Speed (Full Tonnage) 27 Ipm, Ram Speed (Return) 51 Ipm, Open Height 20", Closed Height 8", Bed Height 32", Main Motor 40 Hp, Weight Approx 58,500 Lbs. ...more

MODEL: 90, SERIAL #: 67235, 6" STROKE, 13.5" SHUT HEIGHT, 4" RAM ADJUSTMENT, 44 SPM, 42" x 27" BED, 4" DRILLED & TAPPED BOLSTER, AIR CLUTCH & BRAKE, LIGHT CURTAINS, GOOD CONDITION, 121" T.

SERIAL. 46466, MODEL. 90AFX10, YEAR NEW. 1990, OVERALL LENGTH OF BED. 12', DISTANCE BETWEEN HOUSINGS. 10'6", STROKE. 10", OPEN HEIGHT. 17", CLOSED HEIGHT. 7", THROAT. 8", RAM SPEED RAPID. 380 IPM, RAM SPEED RETURN. 1 TO 405 IPM, RAM SPEED PRESSING. 1 TO 120 IPM, CINCINNATI AUTO FORM CNC BACK GAUGES. 6 AXIS ...more

Serial#5A-2457 Capacity: 60 Ton Stroke: 4” Adjustment: 2.5” Bed Size: 32” lr x 21” fb Ram Size: 14” lr x 10” fb Shut Height: 12.25 Speed: 90 SPM, Air clutch, Air Brake Throat Depth: 11.5”.

MODEL #: 45G, SERIAL #: PN0122, 3" STROKE, 2.5" RAM ADJUSTMENT, 11" SHUT HEIGHT, 68 SPM., 28" x18" BED AREA, 17" x 13" RAM AREA, AIR CLUTCH & BRAKE, PALM BUTTONS, INCH, SINGLE, CONTINUOUS MODES, GOOD CONDITION.

, Explore precision with the 121 TON AIDA "NC2-110(1)" double-crank gap-frame press. air clutch, variable speed drive, and hydraulic overload protection. : 121T, 15 HP, 74"x20.4" bed. Available now at our Cincinnati warehouse., Spec Sheet:, 121 TON AIDA DOUBLE-CRANK GAP FRAME PRESS, Serial No 00511-1422, Model NC2-110 ...more

Make: Accurl, Model: Master, Year: 2025, Machine Location: Upon Request, Upgraded Delem DA66S CNC Control, Upgraded Open Height & Stroke, Upgraded ECO Energy Savings Drive Standby Inverter, Y1/Y2 Upper Ram, X/R, Z1/Z2 Servo Backgauge, CNC Crowning System, Complete Set of Upper AND Lower tooling (4-way die) ...more

TONNAGE FORMING/PUNCHING 500/330 DISTANCE BETWEEN HOUSINGS 18-5 BED/RAM LENGTH 20 feet BELOW GRADE yes WEIGHT 140000 pounds BED HEIGHT 36 inches BED WIDTH 14 inches THROAT DEPTH 12 inches RAM STROKE (FULLY ADJUSTABLE) 10 inches OPEN HEIGHT (MAXIMUM HEIGHT) 20 inches CLOSED HEIGHT (MINIMUM HEIGHT) 10 inches HORSEPOWER ...more

Capacity: 45 Ton Stroke: 4” Adjustment: 3” Shut Height: 11.25” Bed Area: 29.5” lr x 18” fb 90 SPM, AIR CLUTCH, AIR BRAKE, FOOT PEDAL, Light Curtains DUAL PALM BUTTONS Approx Weight: 8,000#.

Gap Frame Press • Used 220 Ton Press for Sale Manufacturer: Aida Model: Aida NC1-2000(1)E Press Condition: Very Good Location: Columbia, TN Warehouse Year: 2014 Machine #: 8132 CAPACITY 220 US TONS / 176 US TON BLANKING CAPACITY STROKE 6.3″ MAX DIE HEIGHT 16.1″ SDAU OVER BOLSTER PLATE RAM ADJUSTMENT ...more

(1) 600 Ton Verson Model S2-600-108-60T Straight Side Press, Capacity: 600 Ton, Stroke: 16", Shut Height: 48", Slide Adjustment: 10", Bed Area: 108" L-R x 60" F-B, Speed: 14 SPM, Windows: 36" Wide, Floor Standing, Air Clutch & Brake, Capacity: 600 Ton, Stroke: 16", Shut Height: 48", Slide Adjustment: 10", Bed ...more

Pre Owned Toyokoki HYB-125-30 CNC Hydraulic Press Brake, Serial Number: 4824, Capacity 110 Tons, Overall Length of Bed & Ram 118”, Distance Between Housings 100.3”, Open Height 13.38”, Stroke 7.87”, Throat 16.14”, Working Height 37”, Bed Width 7.4”, Back Gauge Range ...more

, MAKE. MINSTER, MODEL. 70-4A, SERIAL NUMBER. 70-4A-1586, AGE (YEAR). 1965, CAPACITY. 40 TONS, BOLSTER SIZE. 32" X 29", STROKES / MIN. 300, STROKE. 1.5", SLIDE ADJUSTMENT. 3", SHUT HEIGHT. 14", ELECTRICS., DIMENSIONS., WEIGHT., 4" x.080 P/A INDUSTRIES SFR-4 SERVO FEEDER, AIR CLUTCH, AIR BRAKE, DUAL PALM, DOUBLE ROSS ...more

Make: Accurpress, Model: 710010, Year: 1996, Machine Location: Washington, Tonnage: 100 Tons, Overall Bed Length: 10′, Distance Between Housing: 102″, Stroke: 8″, Throat Depth: 10″, Open Height: 16″, Closed Height: 8″, Ram Speed (Fast Approach): 115 IPM, Ram Speed (Slow Bend): 24 ...more

Coil weight capacity: 10000 pounds, Coil width capacity: 42 inches, Minimum expansion range: 20 inches, Maximum expansion range: 24 inches, Coil O.D. capacity: 60 inches, Coe Press Pull Off Coil Reel Uncoiler :, Coil weight capacity: 10,000 Lbs., Coil width capacity: 42", Expansion range: 20" - 24" (To be confirmed) ...more

NEW 22 TON x 4" US INDUSTRIAL MODEL USHB22-4 HYDRAULIC PRESS BRAKEBase Price PORSTANDARD EQUIPMENTPower Front Operated Back Gauge, Motorized With Fine Adjustment Hand WheelPower Ram Depth Control, Motorized With Fine Adjustment Hand WheelDigital Displays For Backgauge Position and Ram PositionAll Steel ...more

Platen Size: 51.0” x 39.0” Pressing Capacity: 100 Ton Maximum Mold Weight: 12,000 lbs Upper Mold Half Maximum Weight: 6,000 lbs Stroke w/ Bolsters Installed: 38.4” Daylight w/ Bolsters Installed: 41.2” Hyd. Motor Horsepower: 10 Hp Mold Top Half Inversion: +/- 180° Voltage: 480/3/60 Floor ...more

Capacity 350 tons Bed & Ram Length 168 inches Distance Between Housing 12' 5" Adjustable Stroke 10 inches Maximum Open Height 20 inches Closed Height 10 inches Throat (gap) 10 inches Three Working Speeds Fast Approach: 200 ipm, Pressing Speed: 25 ipm, Return Speed: 200 ipm Approx Dimensions (L x W x H) 180" x ...more

Press Tonnage 60 tons Max. Bending Length 82.7 inches Distance Between Frames 86.6 inches Max. Open Height 19.7 inches Stroke Length (Y-Axis.) 11 inches Y- Axis Working Speed 23.6 IPM Y- Axis Max. Speed 236 IPM Y- Axis Repeating Accuracy +/- 0.0000787 X- Axis Movement 23.6" X- Axis Speed 19.69 IPS X- Axis Repeating ...more

Manufacturer Niagara Model SC-100-36-30 Condition Used Stock Number 10596 Capacity 100 ton Bed area 36"x30" Stroke length 4" Shut height (sdau over bed) 14" Slide adjustment (powered) 3" Windows (opening in side columns) 19 Strokes per minute 50-125 Helm PLC based operator interface, Helm four point Tonnage ...more