Wabash Power Equipment Co
444 Carpenter Av
Wheeling, IL 60090-6014
Wheeling, IL 60090-6014
Platinum Level Dealer
Surplus Record Dealer Since 1955
Contact
About
Wabash Power Equipment Co., is your primary source for the purchase or rentalof new and used firetube boilers, watertube boilers, diesel generators, gas
turbine generators, pulverizers, pumps and related equipment.
Products & Services
- Boilers
- Gear Reducers
- Generators
- Pulverizers & Hammermills
- Pumps
- Turbines
Associations & Affiliations
| Additional Contacts | Address | Phone |
|---|---|---|
| Michael Pfeiler | Chicago, IL | 800-704-2002 |
154 listings in 25 categories
1400 KW Caterpillar #D3606, diesel generatory, 277/480 Volts, 3-phase, 6836 hrs, 900 RPM, skid mounted, 1986
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: 60 Hz Diesel Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Caterpillar
Model: D3606
Year: 1986
Used 1400KW continuous Caterpillar skid mounted diesel generating unit, With Cat D3606 engine and Kato brushless synchronous AC generator rated 1750KVA, 1400KW continuous, 3 phase, 60 hz. ...more
60 Hz Three Phase Transformers
6 Results
1500 KVA 4160 Delta Pri. 480Y/277 Sec., Square D, oil filled, Class OA/FFA, 1994
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: 60 Hz Three Phase Transformers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Square D
2000 KVA 13200 Primary, 480 Secondary, Alstom, oil filled (8 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: 60 Hz Three Phase Transformers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Alstom
2500 KVA McGraw-Edison, substation oil filled transformer, class OA
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: 60 Hz Three Phase Transformers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
2500 KVA McGraw Edison Substation Oil Filled Transformer Class OA. High Voltage 2400 Delta/4160 wye/2400. Low voltage 480 Delta, with 2-2.5% A & B taps, 65 degree C rise, standard ...more
2800 KVA 4160 Primary, 480Y/277 Secondary, Square D, class OA transformer (2 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: 60 Hz Three Phase Transformers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Square D
Year: 1990
One (1) 2500/2800 KVA Sqaure D Class OA Transformer. Identified by S/N 900308-A1, Manufactured in 1990, 3 phase, 60 cycle. High Voltage: 4160 Delta, Low Voltage: 480Y/277, KVA rating ...more
3750/5250 KVA 13800 Primary, 4160/2400 Secondary, Square D, oil filled, taps
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: 60 Hz Three Phase Transformers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Square D
36/48/60 MVA 138000 Primary, 13200 Secondary, General Electric Prolac transformer, fan cooled, taps, unused, 1999
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: 60 Hz Three Phase Transformers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Year: 1999
1 (One) unused 36/48/60/67.2 MVA GE PROLEC generator step-up transformer, 3 phase, 60 hertz, 55/65 deg. C rise, class OA/FA/FA/FA, 11% imp., copper windings, 3 x HV 600:5 MRCT'S, 3 x HV ...more
1563 KVA, 900 RPM, General Electric, type AT1, Frame 9278, 7620/13200 Volts, reconditioned
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: AC Generator Ends
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
More Info, (One) reconditioned 1563 KVA / 1250 KW G.E. generator, Type AT1, Frame 9278, 3/60/7620-13,200 V, 900 RPM, 80% PF, 80C temp rise stator and rotor. Direct connected to 13 KW ...more
2500 KW, 900 RPM, Beloit, Frame 956-34, 1-bearing, rebuilt, 3/60/4160 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: AC Generator Ends
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Beloit
2500 KW, 900 RPM, Ideal, SAB, Frame 21320, 2 bearing, 0.8 S.F.,480 Volts, 1250 hours, Frame BE-14-5 rated KW output, Brushless exciter type FRBA, 1973
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: AC Generator Ends
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ideal
Year: 1973
100 HP Toshiba, EXE2-410K100, 460 V.,stored indoors, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: AC Variable Frequency Drives
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Toshiba
Model: EXE2-401K100
400 HP Allen-Bradley, 1336 Plus II, 460 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: AC Variable Frequency Drives
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Allen-Bradley
Model: 1336 PLUS II
Economizers, ECO, 40000-250000 PPH, 490-935 psig, 700 Degrees Temp.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Accessories
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Eco
Model: ECONOMIZERS
More Info, Wabash Power works with Eco, Inc out of Tulsa, OK to build Economizers that are paired with our rental boilers. Economizers take energy from flue gas, which would otherwise vent ...more
Mobile SCR System, Anhydrous Ammonia Process Control Unit, 3' x4' x8', Stainless Steel Skid Package
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Accessories
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Model: MOBILE SCR SYSTEM
Anhydrous Ammonia Process Control Unit, 3x4x8 Stainless Steel Skid Package Includes:, Bottle rack for storage of (8) 150# or 300# anhydrous ammonia compressed bottles (Enduser to supply ...more
60 GPM @ 110' TDH, Worthington #11/2CN52, 5 HP, 3480 RPM, 230/460 V., new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Feedwater Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Worthington
Model: 11/2CN52
65 GPM @ 40' TDH, Durco / Flowserve #1.5x1x8, 2 HP, 1800 RPM, 230/460 V., new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Feedwater Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Durco
Model: 1.5X1X8
88 GPM @ 875' TDH, Ingersoll-Rand #GTB, 60 HP, 230/460 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Feedwater Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Model: GTB
150 GPM @ 174' TDH, Dean Brothers #DL236, 15 HP, 3500 RPM, 220/460 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Feedwater Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Dean Brothers
Model: DL236
160 GPM @ 1800' TDH, Pacific #JTC-8, 3600 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Feedwater Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Pacific
Model: JTC-8
175 GPM @ 1090' TDH, Wilson Snyder, vertical, 2 stage, 3550 RPM, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Feedwater Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Wilson Snyder
270 GPM @ 1362' TDH, Ingersoll-Rand #2CNTA, 6 stage horizontal (skid mounted)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Feedwater Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Model: 2CNTA
300 GPM @ 2650' TDH, Ingersoll-Rand, feed pump, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Boiler Feedwater Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Centrifugal Compressors and Gas Compressors, Reciprocating, Turbine Driven
1 Result
Frick #RWB-II-60+, skid mounted fual gas screw compressor, 200 HP, 345 acfm, 1270 scfm
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Frick
Model: RWB-II-60+
1 (One) 345 ACFM, 1270 SCFM Frick skid mounted Fuel Gas Screw Compressor, model RWB II 60+, methane gas service. Capacity - 3224 #/hr @ 54.4 psia, 60F suction, 263.6 psi discharge at 120F. ...more
180 GPM @ 1950' TDH, Flowserve #2WDXE-D, 8 stage, 316SS impellers, Carbon Steel casing, 200 HP
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Flowserve
Model: 2WDXE-D
200 GPM @ 940' TDH, Flowserve #WDE32, 3550 RPM, rebuilt
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Flowserve
Model: WDE32
200 GPM @ 1000' TDH, Flowserve #WDE16-IND, 8 stage, 75 HP, 3600 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Flowserve
Model: WDE16-IND
211 GPM @ 460' TDH, Worthington #4LR-11A, 3560 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Worthington
Model: 4LR-11A
225 GPM @ 1760' TDH, Ingersoll-Rand #21/2RTM4, 4600 RPM, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Model: 21/2RTM4
240 GPM @ 3313' TDH, Ingersoll-Rand, w/400 HP motor, 3/60/460 V., 3600 RPM, 1990
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Year: 1990
400 GPM, Grundfos skid assemblies, variety F pump sizes, stored indoors
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Grundfos
425 GPM @ 25' TDH, Bell & Gossett #U4A-6-3/8BFS, 3/60/240-480 V., 1750 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Bell & Gossett
Model: U4A-6-3/8BFS
455 GPM @ 345' TDH, Deming #D814, 3600 RPM, unused
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Deming
Model: D814
500 GPM @ 100 psi, Peerless fire pump, 49 HP, 1750 RPM, 11-1/2" impeller
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Peerless
550 GPM @ 3000' TDH, Pacific #BFJTC, 10 stage, 460 HP, 3600 RPM, 2300 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Pacific
Model: BFJTC
600 GPM @ 1080' TDH, Ingersoll-Rand #DA3x10x4, horizontal, 3600 RPM, 1050 psig
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Model: DA3X10X4
657 GPM @ 2980' TDH, United #W/3x9W MSNH-1, 800 HP, 3600 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: United
Model: W/3X9W
700 GPM @ 370' TDH, Ingersoll-Rand #4SC 375 HVD.T, 3550 RPM, 4SC pump, 100 HP, GE Model 5K405SK113, Fr. 405TS, 460V, 3560 RPM, ser.0J353065
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Model: 4SC
1000 GPM @ 140 psig, Gorman Rupp, 3/60/460 V., 1750 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Gorman Rupp
2280 GPM @ 2870' TDH, United #8BFH-C, 1750 HP motor, 3570 RPM, 4160 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: United
Model: 8BFH-C
3050 GPM @ 600' TDH, Ingersoll-Rand #1B2A15, HVC centrifuge type, 1780 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Model: 1B2A15
5000 GPM @ 715' TDH, Ingersoll-Rand/Flowserve, 1B 2A15, 1780 RPM, 990 psig, 10 Shut Height, Size 10 SH, steel case, bronze fitted, 2005
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ingersoll-Rand
Model: 1B
Year: 2005
5850/8750 GPM @ 920/760' TDH, Bingham Williamette
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Centrifugal Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Bingham
Model: WILLIAMETTE
Condensing Steam Turbine Generators
2 Results
6000 KW Worthington (DR), 400 psig @ 720 Degrees Fahrenheit w/2.5" HG ABS, 3/60/12400-13800 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Condensing Steam Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Worthington
20000 KW General Electric, 850 psig @ 900 Degrees Fahrenheit, 15 stage, 32 MVA generator, 13800 Volts, 1965
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Condensing Steam Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Year: 1965
Deaerators
6 Results
BFS #Zer-O-Pac, 42000 pph, spray type unit, (2) 110 GPM @ 743 TDH, (2) 40 HP motors
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Deaerators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Bfs
Model: ZER-O-PAC
BFS #Zer-O-Pac-24MS-530, 24000 pph spray type deaerator, (2) 75 HP motors, 50 psig
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Deaerators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Bfs
Model: ZER-O-PAC-24MS-530
Year: 2005
BFS Industries, 300000 deaerator, tray type, stored indoors
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Deaerators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Bfs
Cochrane #T-54, 165000 pph, tray type, stored indoors
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Deaerators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cochrane
Model: T-54
Crane #T-48 tray type, 115000 pph, 30 psi, 2005
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Deaerators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Crane
Model: T-48
Year: 2005
Kansas City #HS5512, 80000 pph, spray type, stored indoors, available immediately
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Deaerators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Kansas City
Model: HS5512
2000 GPM @ 120 psi, ITT, 200 HP, 460 V., 1994
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Fire Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Itt
Year: 1994
800 HP Cleaver-Brooks #CBR-200-800-250, Mobile Steam Plant, complete portable boiler room w/C-B firetube boiler, 27600 PPH, 75 HP Blower, 30 PPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Firetube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: CBR-200-800-250
800 HP Cleaver-Brooks, mobile steam plant, 250 psig, gas/oil, recirc. components, 30 PPM, Natural Gas / Oil
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Firetube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
5200 KW Solar Taurus #60-7301, LFG & natural gas turbine generator set, 4160 Volts, 2001 (2 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Gas Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Solar
Model: TAURUS 60
8820 KW Solar #Mars 90, 12000, Ideal gen., 4160 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Gas Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Solar
Model: MARS 90
9500 KW Solar #Mars 90.T13002S, enclosed, Natural Gas SoLoNOx, 3/60/4160 Volts, 1987, 2001 (2 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Gas Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Solar
Model: MARS 90
Year: 2001
15600 KW General Electric #S424-C gear reducer
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Gas Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Model: S424-C
18000 KW General Electric #5001M, 2-stage power turbine, nat gas/2 oil, 10287 hours
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Gas Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Model: 5001M
19600 KW General Electric #S524, from a gear reducer from GE Fr.5LA, 5105/3600 RPM, 1800 total life hours
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Gas Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Model: S524
28000 KW General Electric, Frame 5P, 3/60/13800 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Gas Turbine Generators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Gearboxes (Gear Reducers - No Driving Unit)
16 Results
117 HP @ 4500 RPM, Terry #O, 5.11:1 ratio
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Terry
Model: O
200 HP @ 4320 RPM, Elliott #C5, 6.00 :1 ratio
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Elliott
Model: C5
250 HP @ 1750 RPM, Flender #GE120, 28.18 :1 ratio, reconditioned
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Flanders
Model: GE120
255 HP @ 4000 RPM, Philadelphia #3418MBTS, 4.45:1 ratio
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Philadelphia
Model: 3418MBTS
300 HP @ 5370 RPM, General Electric #300-5370, Centrifuge Type S-55-G-5.57
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Model: 300-5370
450 HP @ 770 RPM, Worthington #450-770, J3 centrifuge type
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Worthington
Model: 450-770
2253 HP @ 10800 RPM, Westech, gear reducer, 1987
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Westech
Year: 1987
3000 HP @ 13800 RPM, Falk #MO6-575002, 15.38 :1 ratio
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Falk
Model: MO6-575002
4000 HP @ 22536 RPM, Cincinnati BHS #WGD2-170, 12.52:1 ratio, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cincinnati
Model: WGD2-170
20000 HP @ 5105 RPM, General Electric #S1424RC, (15.6 MW), 1.41 :1 ratio, recond.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Model: S1424RC
20000 HP @ 10957 RPM, Allen-Bradley #ASG-33, 6.08 :1 ratio, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Allen-Bradley
Model: ASG-33
20280 HP @ 5105/3600 RPM, General Electric
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
20300 HP @ 5086 RPM, General Electric #S-36-C2, 1.41 :1 ratio, reconditioned
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Model: S-36-C2
22000 HP @ 5086 RPM, General Electric #S-36-C2, (17 MW), 1.41 :1 ratio, recond.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Model: S-36-C2
22300 HP @ 5086/3600 RPM, General Electric
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
25000 HP @ 5105 RPM, General Electric #S-524, (19.6 MW), 1.41 :1 ratio
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Model: S-524
Indoor Type Vacuum Circuit Breakers
1 Result
1200 Amps, Square D, VR-05025-12, Master Clad, 5000 Volts, new (2 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Indoor Type Vacuum Circuit Breakers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Square D
Model: VR-05025-12
Modine engine fan driven radiators off 2000KW, DDC-MTU Spectrum/Kohler generating units
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Industrial Radiators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Modine
Young #85V30, horizontal remote radiator type HC, 30 HP, 1750 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Industrial Radiators
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Young
Model: 85V30
Used Young horizontal remote radiator type HC horizontal core, Model 85V30, P/N 267133, Young order # B-163235. Vertical air flow, fan driven by Allis Chalmers motor, S/N 51-331-968, Model ...more
357 GPM, Sulzer #2, 4100' TDH, 600 HP, 3600 RPM, 4160 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Positive Displacement Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Sulzer
Model: 2
Pulverizers and Hammermills
28 Results
Raymond #40, Impact Hammermill, 40 HP, 1800 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -40
Raymond #43, Impact Hammermill, double whizzer, 25 HP, 1800 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -43
Raymond #51, Impact Hammermill, 150 HP, rotary airlock feeder, grinding chamber
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -51
Raymond #63, Impact Hammermill, 250/150 HP, 1800 RPM, rotary airock feeder, horz.shaft
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -63
Raymond #352, bowl mill, 4450 lb./hr., 50 HP, 1800 RPM, 440 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -352
#352 C-E Raymond Bowl Mills, nominally rated at a base capacity of 4,450#/hr. for 55-grindability coal pulverized to 70% minus 200 mesh, (capable of grinding down to 90% minus 200 mesh at a ...more
Raymond #372, bowl mill, 6200 lb./hr., 75 HP, 1800 RPM, 2300 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -372
Reconditioned 372 C-E Raymond Bowl Mill Coal Pulverizer rated at a base capacity of 6,200 Lbs/Hr. on 55 grindibility coal pulverized to 70% minus 200 mesh. Mill is capable of grinding down ...more
Raymond #412, bowl mill, 8000 lb./hr., 100 HP, 1200 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -412
More Info, (One) Reconditioned #412 C-E Raymond Bowl Mill rated at a base capacity of 8,000 Lbs/Hr. on 55 grindibility coal pulverized to 70% minus 200 mesh.Mill is capable of grinding down ...more
Raymond #452, bowl mill, 9700 lb./hr., 100 HP, 1200 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -452
More Info, (One) Reconditioned #452 C-E Raymond Bowl Mill Coal Pulverizer rated at a base capacity 9,700 Lbs/Hr. on 55 grindibility coal pulverized to 70% minus 200 mesh. (Mill is capable ...more
Raymond #453, bowl mill, 11500 lb./hr., 125 HP, 1200 RPM (2 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -453
Unit Assembly, Each Mill is all internal related grinding components; millbase; gear housing with worm gear and worm shaft, vertical shaft with bowl and grinding rings; millside with ...more
Raymond #493, bowl mill, 16800 lb./hr., 100/60 HP, 1200 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -493
More Info, 6 (Six) Reconditioned #493 C-E Raymond Bowl Mill Coal Pulverizers rated at a base capacity of 16,800Lbs/Hr on 55 grindibility coal pulverized to 70% minus 200 mesh. Mill is ...more
Raymond #533, bowl mill, 20300 lb./hr., 200 HP, 1200 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -533
More Info, 4 (Four) Reconditioned #533 C-E Raymond Bowl Mill Coal Pulverizers rated at a base capacity of 20,000#/hr. on 55 grindibility coal pulverized to 70% minus 200 mesh. Mills are ...more
Raymond #533A, bowl mill, 22300 lb./hr., 250 HP, 1160 RPM, 2300 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -533A
Raymond #573, bowl mill, 26500 lb./hr., 250 HP, 900 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -573
More Info, (Three) Reconditioned Center Feed #573 C-E Raymond Bowl Mill Coal Pulverizers rated at a base capacity of 26,500#/hr. on 55 grindibility coal pulverized to 70% minus 200 mesh. ...more
Raymond #593, bowl mill, 28200 lb./hr., 300 HP, 900 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -593
Raymond #613, bowl mill, 32700 lb./hr., 300 HP, 900 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -613
#613 C-E Raymond Bowl Mill Coal Pulverizer, nominally rated at a base capacity of 32,700#/hr. on 55 grindability coal pulverized to 70% minus 200 mesh, (capable of grinding down to 90% ...more
Raymond #753, bowl mill, 59000 lb/hr, 450 HP, 900 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -753
Raymond #923, bowl mill major components
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: -923
Raymond #4237, roller mill with double whizzer, 60/30 HP
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 4237
More Info, (One) Reconditioned #4237 C-E Raymond High Side Roller Mill driven by a 60 HP 3/60/440V motor. Unit is all internal related grinding components; rebuilt gear housing with gear; ...more
Raymond #5048, hide side roller mills, w/dbl whizzer, 75/50 HP, horizontal shaft w/pinion (2 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 5048
(2) Used CE Raymond Roller Mills Model 5048, IMMEDIATELY AVAILABLE : (Two) Used #5048 C-E Raymond High Side Roller Mills. Units are all internal related grinding components; gear housing ...more
Raymond #5057, roller mill, w/double whizzer, 100/75 HP
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 5057
1-Reconditioned #5057 C-E Raymond High Side Roller Mill driven by a 60HP, 3/60/440V. Electric motor. Unit is a rebuilt gear housing assembly, rebuilt horizontal shaft with pinion; mill ...more
Raymond #5448, roller mill V belt driven, internal grinding, new oil wicking, 150HP/125HP
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 5448
Raymond #6058, roller mill with double whizzer, 200 HP/150 HP
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 6058
Raymond #6659, roller mill w/double whizzer, 250 HP/150 HP, 5 new plow bodies & tips
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 6659
Raymond #6669, roller mill, w/double whizzer, 300/150 HP, 6 new plow bodies & tips
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 6669
The #6669 mill is a suspended six-roller type with an air separating system built-in, which makes an integral system for both grinding and classifying materials. Size reduction of material ...more
Raymond #73412, roller mill, w/single whizzer, 350/150 HP
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 73412
Raymond #73612, roller mill, w/double whizzer, 500/200 HP
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Model: 73612
Raymond, 18" vertical hammermill, 20 HP, 3600 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Raymond
Williams Standard 4 roll roller mill with double whizzer 100/175 HP
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Pulverizers and Hammermills
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Williams
Squirrel Cage AC Electric Motor
3 Results
200 HP 3600 RPM General Electric, Frame 445TS, TEFC, 460 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Squirrel Cage AC Electric Motor
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
Frame: 445TS
500 HP 1200 RPM Reliance, Frame G400JZ, TEFC/API, 4000 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Squirrel Cage AC Electric Motor
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Reliance
Frame: G400JZ
1250 HP 3589 RPM Reliance, Frame 17A6809S, OPD, 2300 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Squirrel Cage AC Electric Motor
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Reliance
Frame: 17A6809S
Steam Turbine Generators - Non Condensing
1 Result
510 KW Dresser /Turbodyne, 600/650psig, 700 Degrees Fahrenheit /125psig exhst, 6" Inlet Flange, 3/60/2400/4160 Volts
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Dresser
Turbine, Capacity 510 KW, Stages Single, Initial Steam Conditions 600-650 psig @ 700°F, Exhaust 125 psig, RPM 1800, Governor Trisen TS-310, Inlet Flange 6", Exhaust Flange 8" ...more
Steam W/Out Generator Turbines
20 Results
70 HP Terry type ZS-1, 425 psig, 3500 RPM, 5 psig exhaust pressure, CCW rotation
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Terry
1 (One) 70 HP Terry steam turbine, Type ZS-1, 425 psig, 5# BP, 3500 RPM, CCW rotation, S/N 25320.
75 HP Terry /SA 520, 185 psig inlet, 3728 RPM, saturated, 65 psig exhaust, CC
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Terry
More Info, (One) 75HP Terry Steam Turbine Type SA520, 185 psig @ 150F with 65# B.P. exhaust, 3018-3728 RPM. C.C. rotation from governor end. This is a gas expander but could be operated as ...more
90 HP Worthington /R2R, 160 psig inlet, 3550 RPM, 450 Degrees , 8 psig exhaust, CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Worthington
147 HP Terry /GS, 300 psig inlet, 3600 RPM, saturated, 25 psig exhaust, CW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Terry
200 HP Terry, non-cond., 600 psi inlet, 4 psig exh., 3550 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Terry
250 HP General Electric / 7THRY, 175/400 psig inlet, 3560 RPM, 20 psig exh., 377/750 Degrees , CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
300 HP General Electric / D-5851-1, 200 psig inlet, 1800 RPM, 10 psig exh., saturated, CW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: General Electric
450 HP Worthington / S2RJ3, 400 psig inlet, 4937 RPM, 45 psig exh., 650 Degrees , CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Worthington
800 HP Coppus Lufkin, non-condensing, 544 psig @ 504 Degrees Fahrenheit, 55# BP exch., 3558 RPM, 47-55 Exhaust Pressure
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Coppus
813 HP Coppus / MN type, 493 psig inlet, 1750 RPM, 55 psig exhaust, 507 Degrees , CW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Coppus
1200 HP Murray / 142UV2, 250 psig inlet, 3800 RPM, 15 psig exhaust, 500 Degrees , CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Murray
1224 HP Elliott DYR PE IVB, non cond., 700 psig @ 719 Degrees Fahrenheit, 5698 RPM, 50 BP exhaust, 1224 HP, 2009
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Elliott
Year: 2009
More Info, FOR SALE ONE (2) NEW 1224HP ELLIOTT-LUFKIN NON COND. GEAR REDUCING MECH. STEAM TURBINES BUILT 2009 700 PSIG @ 719F 50# B.P. EXH FRAME: DYR PE IVB SPEED: Rated 4698 rpm Maximum ...more
1300 HP Terry / CS1, 850 psig inlet, 3560 RPM, 150 psig exhaust, 900 Degrees , CW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Terry
1314 HP Terry / GABS, 150 psig inlet, 3800 RPM, 15 psig exhaust, 900 Degrees , CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Terry
1800 HP Murray / 142UV2, 250 psig inlet, 3600 RPM, 15 psig exhaust, 500 Degrees , CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Murray
2000 HP Hayward-Tyler / TN24, 1000 psig inlet, 3560 RPM, 100 psig exhaust, 546 Degrees , CW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Hayward-Tyler
More Info, One (1) New Hayward Tyler Steam Turbine, Type TN24, 1000 psig initial pressure, 546F, with 100 psig B.P. exhaust, CW rotation from governor end, 3560 RPM.
2220 HP Murray / R type, 545 psig inlet, 3600 RPM, 15/65 psig exhaust, 610 Degrees , CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Murray
Steam Turbine Type: Without Generator, More Info, 1 (One) reconditioned 2200 HP Murray Non-Condensing Steam Turbine, Type R, Frame R-2-J, Initial 545 psig @ 610 TTF, exhaust 13 psig, inlet ...more
2420 HP Elliott / RV6, 350 psig inlet, 9550 RPM, 4" HGS, 610 Degrees , CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Elliott
More Info, One (1) 2420HP Elliott condensing, extraction, 6 stage, Type RV-6, Built in 1958. Serial Number U-4307 Initial steam conditions are 350 PSIG at 610F with 4" HG abs, 9550 RPM. ...more
2800 HP Murray / 142UV2, 395 psig inlet, 4670 RPM, 45 psig exhaust, 700 Degrees , CCW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Murray
More Info, 1 (One) reconditioned 2800 HP Murray non-condensing steam turbine, model 142UV2, 3-stage (composed of (1) Curtis, and (2) Rateau stages). Carbon steel case construction. 395 psig ...more
9495 HP Dresser / 5QT, 400 psig inlet, 8000 RPM, 2.5" HGS, 720 Degrees , CW
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Steam W/Out Generator Turbines
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Dresser
New / Unused 9495 HP (7100KW) Dresser-Rand (Terry) condensing steam turbine, 400 psig @ 720 deg. F, with 2.5" HG ABS, 63,863#/Hr exhaust., S/N D-1691, S.O. U-25181, Model 5QT, multi-stage ...more
Synchronous Generators AC
3 Results
1400 KW, 1800 RPM, Ideal #1750-1400, type SAB, 3/60/4160V
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Synchronous Generators AC
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ideal
2500 KW, 900 RPM, Ideal #21320, type SAB, 2-bearing, continuous, 0.8 service factor, 3/60/277/480V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Synchronous Generators AC
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Ideal
5700 KW, 1500 RPM, Kato #AA28154000, 6 wire, .85 PF, 50 hz., 7621/13200 Volts, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Synchronous Generators AC
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Kato
More Info, (1) New/unused 5700KW, 6706KVA Kato AC synchronous generator, Model AA28154000; code 4P10.7-3600; S/N: 20683-06; 3 phase, 50 hz, 7621/13,200V, 1500 RPM;.85 P.F.; 6 wire, 293 amp; ...more
Turbo-centrifugal Blowers
1 Result
11250 cfm @ 42 psi, Illinois Tool Works Works, 625 Deg., 150 HP, 1800 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Turbo-centrifugal Blowers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Illinois Tool Works
282 GPM @ 1173' TDH, Allis-Chalmers #MM-3, 125 HP, 3550 RPM, 2300 V.
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Vertical Turbine Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Allis-Chalmers
Model: MM-3
300 GPM @ 58' TDH, Deming #2-1/2 Type SA-1, 3500 RPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Vertical Turbine Pumps
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Deming
Model: 2-1/2
40000 PPH Cleaver-Brooks / Nebraska, trailer mounted, 350 psi, gas/oil (8 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: NOS-1A-53
Three (3) 40,000#/Hr. Nebraska Mobile Trailer Mounted Package Watertube Boilers, 350psig D.P., Model NOS-1A-53. Each boiler is capable of operating at pressures between 125-335psig. The ...more
40000 PPH Cleaver-Brooks #NOS-1A-53, 350 psi, trailer mounted, lox NOx Natcom boiler
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: NOS-1A-53
/, 40,000 lb/hr O-Type Watertube Boiler 350 PSI Design, Manufacturer Cleaver Brooks / Nebraska Boiler, Model NOS-1A-53, Year Built 2008 and Newer, Burner Manufacturer NATCOM or COEN/TODD ...more
50000 PPH Cleaver-Brooks #NOS-2A-53, packaged watertube boiler, 500 psig, gas, 52' - 4" L x 10' - 7" W x 13'- 9" H, lox NOx
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: NOS-2A-53
60000 PPH Cleaver-Brooks / Nebraska #NOS-2A-58, 350 psi, low NOx, gas/oil, 2001
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: NOS-2A-58
Year: 2001
75000 PPH Cleaver-Brooks/Nebraska #NOS-2A-67, WT, 350 psig drip proof, low NOx, gas/oil, trailer mounted, NOx with FGR 30 PPM
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: NOS-2A-67
New 75,000#/hr. Nebraska, 350psig D. P., Mobile, Trailer-Mounted Package Watertube Boilers, Model NOS-2A-67. Operating pressures: 125-335psig. The boilers are a 2-drum, bent tube type ...more
75000 PPH Cleaver-Brooks #NOS-2A-67, 350 psi, trailer mounted, lox NOx burner
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: NOS-2A-67
75,000 lb/hr O-Type Watertube Boiler; Superheated Steam, Manufacturer Cleaver Brooks / Nebraska Boiler, Model NOS-2A-67, Year Built 2008 and Newer, Burner Manufacturer NATCOM or COEN/TODD ...more
75000 PPH Optimus / Chaunte, pkg watertube boiler, Saturated Steam, 750 psi @ 750 Degrees F, low NOx, gas/oil, 95' -0" L x 11' -6" W x 14' -4" H, 480V/l20V control circuit transformer
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Optimus
Model: OPTIMUS
82500 PPH Cleaver-Brooks / Nebraska ##NOS-2A-67, pkg boiler, 350 psig, gas/oil, low NOx, 54' -0" L x 10' -7" W x 14' -4" H, Natural Gas / Oil, type NOS-2A-67
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: NOS-2A-67
82500 PPH Optimus, 399 psi, NG/oil, low NOx burner, 125-335 psig operating pressure, 54' -0" L x 10' -7" W x 14' -4" H, Low_NOx natural gas/#2-6 oil firing
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Optimus
115000 PPH Nebraska #N2S-6-080, skid mounted watertube boiler, 400 psi, low NOx Natcom Burner, gas/oil, 30 PPM, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Nebraska
Model: N2S-6-080
One (1) New 100,000-115,000#/hr. Nebraska, 350 psig D.P., Package Watertube Boiler, Type NS-F-89. The boiler is a 2-drum bent tube type, referred to as a "D" design, composed of a 48" I.D. ...more
150000 PPH Nebraska #N2S-7-89, 350 psig, saturated steam temp., Natural gas/oil, 30 PPM, 300 HP, TEFC motor, (2 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Nebraska
Model: N2S-7-89
150000 PPH Nebraska #N2S-7/S-104SH, pkg watertube boiler, 750 psig @ 750 Degrees Fahrenheit, gas/oil, low NOx, 47' - 0" L x 12' -5" W x 16' -6" H, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Nebraska
Model: N2S-7/S-104SH
150000 PPH Nebraska #N2S-8/S3-97SH, pkg watertube boiler, 1025 psi, 900 Degrees TTF, gas/oil, 40' - 0" L x 12' -10" W x 17' -0" H, 30PPM, low NOx package burner, new
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Nebraska
Model: N2S-8/S3-97SH
250000 PPH Nebraska #N2SS-8/S-124-SH, pkg watertube boiler, 750 PSIG @ 750 Degrees Fahrenheit, 50' -9" L x 12' -10" W x16' -8" H, Natural Gas/Oil, 30PPM, new (2 available)
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Nebraska
Model: N2SS-8/S-124-SH
250000 PPH Nebraska type NB-701D-130, pkg.WT boiler, 800 psig @ 750 Degrees Fahrenheit, gas/oil, low NOx, 30 PPM, D type, 800 PSIG, 2011
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Nebraska
Year: 2011
300000 PPH Cleaver-Brooks / Nebraska #NB-ED-120-875-SH-EC-AL, pkg watertube boiler elevated Drum type, 875 psig Superhead, Natural gas
Wabash Power Equipment Co | Wheeling, IL | Michael Pfeiler |
Category: Watertube Boilers
Seller: Wabash Power Equipment Co
Location: Wheeling, IL
Mfr: Cleaver-Brooks
Model: NB-ED-120-875-SH
