back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Trader Machinery Inc

63 Maplecrete Rd
Concord, ON L4K1A5 Canada
Platinum Level Dealer
Surplus Record Dealer Since 2004

About

Trader Machinery Inc.,specializes in buying & selling new and used metalworking equipment, metal fabricating, and tool room equipment.
Their staff are highly trained and prepared to answer any and all questions you have about our metalworking services. If you require new or used metalworking equipment, they can assist you. Trader Machinery is a leader in dealing used metalworking equipment in Canada.

Trader Machinery Inc.,since 2004, buying and selling quality new and used metalworking machinery worldwide.

Trader Machinery Inc. is a Surplus Record Gold Level Dealer:

1. Stocking dealers with real inventories they own or control.
2. Have met Surplus Record's standards for ethical dealings with their customers since 1993.
3. Have been visited in-person by Surplus Record staff every year.
4. Enjoy nearly 18 years listing with Surplus Record without unresolved complaint or incident.

Products & Services

  • Brakes, Press
  • CNC Machinery
  • Drills
  • Electrical Discharge Machines Ram/Wire
  • Grinders
  • Lasers
  • Lathes
  • Milling Machinery
  • Presses
  • Saws
  • Shears
  • Turret Presses

Associations & Affiliations

101 listings in 41 categories

2" x 2" x 3/16" Tauring #SAF-DS-50-HV, hydraulic angle rolls, 2-speed motor, new, #2470

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Tauring
Model: SAF-DS-50-HV
ManufacturerTAURINGModelSAF DS 50 HVStock Number2470Shaft Diameter1.57" ( 40 mm)Shaft Usable Length3.74" ( 95 mm)Roll Diameter5.74"Shaft Speed10 RPM / ...more

Darbert #Microcut, vertical milling machiune, 10" x50" table, 3 HP, R-8,2-Axis digital read out, 1 shot lube

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Darbert
Model: MICROCUT
ManufacturerDARBERTModelMICROCUTStock Number4276TABLE AREA10" X 50"SPINDLE SPEED RANGE60 - 4200 RPMSPINDLE TAPERR8MOTOR HP3 HPELECTRICS600V/3/60. 2-AXIS HEIDENHAIN DIGITAL READOUTX-AXIS POWERFEEDONE ...more

First #LC-20VSG, vertical milling machine, 10" x51" table, 5 HP, Heidenhain 3-Axis digital read out

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: First
Model: LC-20VSG
ManufacturerFIRSTModelLC20-VSGStock Number4314Table size10" X 51"Travel x axis31"Travel y axis16.5"Travel z axis (knee)16.5"Feed rate x axis0.086 - 27"/MINRapid x ...more

First #LC-185VS, vertical milling machine, 10" x50" table, 3 HP, Heidenhain 2-Axis digital read out

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: First
Model: LC-185VS
ManufacturerFIRSTModelLC-185VSSerial Number30801329Stock Number4326WORKING SURFACE10" X 50"LONGITUDINAL TRAVEL31"CROSS TRAVEL16.3"VERTICAL TRAVEL (KNEE)15.3"VERTICAL FEEDS (KNEE)RAPIDSPINDLE SPEEDS4500 RPM, VARIABLESPINDLE TAPERR8QUILL TRAVEL5"OVERARM TRAVEL18.5"SPINDLE ...more

First #LC-B185VS, vertical milling machine, 10" x50" table, 3 HP, Heidenhain 2-Axis digital read out

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: First
Model: LC-B185VS
ManufacturerFIRSTModelLC-B185VSSerial Number30801329Stock Number4325WORKING SURFACE10" X 50"LONGITUDINAL TRAVEL31"CROSS TRAVEL16.3"VERTICAL TRAVEL (KNEE)15.3"VERTICAL FEEDS (KNEE)RAPIDSPINDLE SPEEDS4500 RPM, VARIABLESPINDLE TAPERR8QUILL TRAVEL5"OVERARM TRAVEL18.5"SPINDLE ...more

H.H. Roberts #TW-50-MQWVFRG, bed type vertical milling machine, 18" x69" table, 5 HP

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: H.h. Roberts
Model: TW-50-MQWVFRG
ManufacturerHH ROBERTSModelTW-50-MQWVFRGYear2007Stock Number4305TRAVEL - X50"TRAVEL - Y22"TRAVEL - Z24"TABLE SIZE18" X 68"QUILL TRAVEL5.5"SPINDLE NOSE TO TABLE27"SPINDLE TAPERISO 40MOTOR ...more

Magnum-Cut #3VS, vertical milling machine, 10" x54" table, 3 HP, one shot lube, new

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Magnum-Cut
Model: 3VS
ManufacturerMAGNUM-CUTModel3VSStock Number3477TABLE SIZE10" X 54"LONGITUDINAL TRAVEL37"CROSS TRAVEL (SQUARE CROSSWAYS)17"VERTICAL TRAVEL OF KNEE16.5"SPINDLE TAPERR8SPINDLE SPEEDS (VARIABLE)60 - 4000 RPMQUILL ...more

Magnum-Cut #4VS, 10" x54" table, 5 HP, ISA 40, one shot lube, Meehanite castings, new

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Magnum-Cut
Model: 4VS
ManufacturerMAGNUM-CUTModel4VSStock Number4064TABLE SIZE10" X 54"LONGITUDINAL TRAVEL ( MANUAL )35.9"CROSS TRAVEL17"VERTICAL KNEE TRAVEL16.5"SPINDLE MOTOR5 HPSPINDLE TAPERISA 40SPINDLE SPEEDS ( ...more

Maximart #2VS, vertical mill, 9" x49" table, 3 HP, R-8, one shot lubrication system, new, #3472

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Maximart
Model: 2VS
ManufacturerMAXIMARTModel2VSStock Number3472TABLE SIZE9" x 49"LONGITUDINAL TRAVEL38"CROSS TRAVEL14"QUILL TRAVEL5"VERTICAL KNEE TRAVEL14"SPINDLE TAPERR-8SPINDLE MOTOR3 HPELECTRICS575V/3/60SPINDLE SPEEDS ( VARIABLE )75 - ...more

C Frame Hydraulic Press Machines (Gap Frame)

3 Results

6 Ton, Denison #Multipress, 10" stroke, 16" daylight, 2" ram diameter, 11-1/2" x17" bed area, 5 HP

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Denison
Model: MULTIPRESS
ManufacturerDENISONSerial Number19087Stock Number4306TONNAGE6 TONBED AREA11-1/2" X 17"STROKE10"THROAT DEPTH6"DAYLIGHT16"RAM DIAMETER2"MOTOR5 HPELECTRICS550V/3/60. PALM BUTTON CONTROLELECTRONIC STROKE CONTROL ...more

15 Ton, Denison #FWH150M, hydraulic press, 16" x24" bed, 15 HP, palm button controls

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Denison
Model: FWH150M
ManufacturerDENISONModelFWH150MStock Number4309TONNAGE15 TONAREA OF BED16" X 24"MOTOR15 HPELECTRICS575V/3/60MAX PSI2390 . PALM BUTTON CONTROLS.

20 Ton, RK Machinery #CFP-20, hydraulic C-frame press, 12" stroke, 18" daylight, 10" throat, 10 HP

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Rk Machinery
Model: CFP-20
ManufacturerRK MACHINERYModelCFP-20Stock Number4308CAPACITY - TONNAGE20 TONSAPPROACH SPEED172 IPMPRESSING SPEED51 IPMRETURN SPEED248 IPMTABLE AREA20" X 12"DAYLIGHT18"ADJUSTABLE STROKE12"THROAT DEPTH10"MOTOR HP10 ...more

CNC Cylindrical Grinders

1 Result

13.8" x 39.4" Studer #S-40, Fanuc 16T CNC, 20" dia. wheel, 41.4" X, 10.8" Y, 1997, #3820

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Studer
Model: S-40
Year: 1997
ManufacturerSTUDERModelS-40Year1997Stock Number3820SWING13.8"CENTERS39.4"PLAIN OR ANGLE HEADPLAINGRINDING WHEEL DIAMETER20"PLUNGE ( YES / NO )YESDRESSER ( YES/NO )YESCNC CONTROLYESTYPE OF CNC ...more

Haas #DT-1, drill & tap machine, 15" x26" table, BT-30, brand new, never installed, 2021

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: DT-1
Year: 2021
ManufacturerHAASModelDT-1Year2021Stock Number4328TABLE AREA15" x 26"X-AXIS TRAVEL20"Y-AXIS TRAVEL15"Z-AXIS TRAVEL15.5"SPINDLE NOSE TO TABLE21.5" Max 6" minNO. OF STATIONS ON ATC20 ...more

CNC Gear Hobbing Machinery (Hobbers)

1 Result

Hurth Modul #WF300, CNC gear hobbing machine, Siemens CNC, 12.99" workpiece diameter, 1996

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Hurth
Model: WF300
Year: 1996
ManufacturerHURTH MODULModelWF300Year1996Stock Number4339MAX. WORKPIECE DIAMETER12.99" ( 330 MM )WORKPIECE SHAPEDISK-SHAPED WITH BORE OR PINION SHAFTSWORKPIECE RECEPTOR2MAX. WORKPIECE WEIGHT ...more

CNC Lasers

4 Results

Amada Lasmac #LC2415A-III, 2000 watt laser, Fanuc 160iL, 5' x 8' table, chiller, 1999

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: CNC Lasers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Amada
Model: LC2415A-III
Year: 1999
ManufacturerAMADAModelLC-2415 IIIYear1999Serial Number25580419Stock Number4310WATTAGE2000 WATTSTABLE WIDTH5'TABLE LENGTH8'MAXIMUM SHEET SIZE W/REPOSITION60" x 198"MAXIMUM WORKPIECE WEIGHT770 LBSWEIGHT14 300 LBS. FANUC ...more

Hymson #HF4020G-6000I, 6000 watt high effeciency CNC fiber optic laser, 157" x78", 2019

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: CNC Lasers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Hymson
Model: HF4020G-6000I
Year: 2019
ManufacturerHYMSONModelHF 4020G-6000IYear2019Stock Number4344Processing Range157.4" x 78.7" (4000 mm x 2000 mm).Z-Axis Travel9.4"Positioning Accuracy+ 0.0011" per 40" (+ 0.03 ...more

Trumpf #L3050, CNC laser, 5000 watt, Siemens Sinumerick 840 CNC, 5' x 10' table, 2008

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: CNC Lasers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Trumpf
Model: L3050
Year: 2008
ManufacturerTRUMPFModelL3050Year2008Stock Number4241LASER RATED OUTPUT5000 WATTWORKING AREA, X, Y , Z63" x 123" x 4.5"WORKING TABLE5' x 10'WORKPIECE WEIGHT1,984 ...more

Trumpf #TruLaser-Weld-5000, CNC laser welding system, 6-Axis, chiller, vacuum unit, 2018

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: CNC Lasers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Trumpf
Model: TRULASER-WELD-5000
Year: 2018
ManufacturerTRUMPFModelTRULASER WELD 5000Stock Number4285No. of Axes6Repeatability+/- 0.05 mmTurnover positioner, typical max. part size4000mm x 1500mm x 1000 mmMax. ...more

CNC Lathes and Turning Centers

11 Results

Cincinnati #Hawk-250, Acramatic 2100 CNC, 20.8" swing, 3" bar, 3-jaw 10" chuck, 1998

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Cincinnati
Model: HAWK-250
Year: 1998
ManufacturerCINCINNATIModelHAWK 250Year1998Stock Number4251MAX. SWING OVER BED20.86"TURNING LENGTH27"BAR CAPACITY3.03"SPINDLE SPEED3,300 RPMSPINDLE NOSEA2-8TAILSTOCK QUILL TAPERMT#5APPROX. WEIGHT10,500 LBS. ACRAMATIC 2100 CNC ...more

Haas #HL-2BB, CNC lathe, Big Bore option, 24" swing, 2.5" bar, 10 station turret, 30/22 HP

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: HL-2BB
ManufacturerHAASModelHL-2BBStock Number4216MAX. SWING OVER BED22"MAX. SWING OVER SADDLE9.5"MAX. TURNING DIAMETER10"MAX. TURNING LENGTH20"SPINDLE SPEEDS3,400 RPM MAX.SPINDLE DRIVE MOTOR30/22 HPMAX. ...more

Haas #ST-20Y, CNC lathe, 21" swing, 2.5" bar, hydraulic 10" chuck, rigid tap, live tooling, 2017

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: ST-20Y
Year: 2017
Manufacturer HAAS. Model ST-20Y. Year 2017. Stock Number 4347.

Haas #ST-25, CNC lathe, 21" swing, 3" bar, live tooling, Macro option, rigid tap, 2021, #4253

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: ST-25
Year: 2021
ManufacturerHAASModelST-25Year2021Stock Number4253Max. Part Swing21"Max. Cutting Diameter11.75"Max. Cutting Length22.5"Bar Capacity3"Travels - X-axis8.4"Travels - Z-axis22.5"Rapid Feedrate on X945 ipmRapid Feedrate ...more

Haas #ST-30T, CNC lathe, 30" swing, 3" bar, programmable hydraulic tailstock, chip auger, 2006

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: ST-30T
Year: 2006
Manufacturer HAAS. Model SL-30T. Year 2006. Stock Number 4348. DATE OF MFG. 09/2006.

Haas #ST-30T, CNC lathe, 31.7" swing, 3" bar, 10" chuck, programmable hydraulic tailstock, 2015

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: ST-30T
Year: 2015
Manufacturer HAAS. Model ST-30. Year 2016. Stock Number 4346.

Hyundai Wia #E160LMC, slant bed CNC lathe, Fanuc i, 18.9" swing, 3-jaw 8" chuck, 2" bar, 2017

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Hyundai Wia
Model: E160LMC
Year: 2017
ManufacturerHYUNDAI-WIAModelE 160LMCYear2017Stock Number4265PURCHASED2019SWING OVER BED18.9"SWING OVER CARRIAGE/CROSS SLIDE11.2"MAX. TURNING DIAMETER7.48"MAX. TURNING LENGTH17.71"SPINDLE NOSEA2-6SPINDLE SPEED MAX.4000 RPMSPINDLE BORE / ...more

Mazak #Cybertech-Turn-4500M/3000 Big Bore CNC lathe, 33.8" swing, 24" chuck, 2006

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Mazak
Model: CYBERTECH-TURN-4500M/3000
Year: 2006
ModelCYBERTECH TURN 4500M/3000Year2006Stock Number4328CHUCK SIZE24"MAXIMUM SWING / OVER CARRIAGE33.88" / 27.5"MAXIMUM CUTTING DIAMETER31.88"MAXIMUM CUTTING LENGTH120"X-AXIS TRAVEL21.375"Y-AXIS TRAVEL123.25"C AXIS ...more

Mazak #Integrex-i-400SLW/2500, multi-taksing turning center, 30" swing, 10" chuck, 2017

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Mazak
Model: INTEGREX-I-400SLW/2500
Year: 2017
ManufacturerMAZAKModelINTEGREX i-400SLW/2500Year2017Stock Number4329SWING OVER BED30"TURNING DIAMETER26" - 30" USING Y AXISTURNING LENGTH98.5"DISTANCE BETWEEN SPINDLES100.75"CHUCK SIZE 1, 210", 10"SPINDLE ...more

Milltronics #ML-22, CNC lathe, Centurion 7, 23" swing, 12.1" swing over cross slide, 3-jaw 10" chuck, 2006

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Milltronics
Model: ML-22
Year: 2006
ManufacturerMILLTRONICSModelML22Year2006Stock Number4293SWING OVER BED23"SWING OVER GAP31"SWING OVER CROSS SLIDE12.1"X-AXIS ( CROSS SLIDE ) TRAVEL15"Z-AXIS TRAVEL63.5"SPINDLE NOSEA2-8SPINDLE SPEEDS VARIABLE40 ...more

SMTCL #HTC2050, Fanuc 0i Mate TC, 9.8" swing, 3-jaw 8" chuck, 1.96" spdl bore, 2007, #4015

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Smtcl
Model: HTC2050
Year: 2007
ManufacturerSMTCLModelHTC2050Year2007Stock Number4015MAXIMUM SWING9.84"MAX. SWING OVER SLIDE5.9"SPINDLE SPEED RANGE10 - 4000 RPMX-AXIS TRAVEL5.9"Z-AXIS TRAVEL23.6"TAILSTOCK SLEEVE DIAMETER3.14"SPINDLE BORE DIAMETER1.96"TAILSTOCK SLEEVE ...more

CNC Press Brakes

10 Results

60 Ton, Wysong #TH5-118, hydraulic brake, 6' overall, 61-1/2" between housing, Automec CNC 300 Autogauge

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Wysong
Model: TH5-118
ManufacturerWYSONGModelTH5-118Stock Number4101TONNAGE60 TONSOVERALL BENDING LENGTH72"BENDING CAPACITIES6' X 10 GA. / 5' X 7 GA.DISTANCE BETWEEN FRAMES61-1/2"STROKE6"ADJUSTMENT9"MAX. DIE SPACE15" ...more

93 Ton, Trumpf #V85, CNC hydraulic press brake, 6.8' overall, 68.8" between housing, 8.4" stroke, 16.1" throat

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Trumpf
Model: V85
ManufacturerTRUMPFModelV85Year1998Stock Number3937MAX. PRESSURE FORCE93 TON ( 85 METRIC )OVERALL BENDING LENGTH80"DISTANCE BETWEEN FRAMES68.8"MAX. STROKE8.4"OPEN HEIGHT15.1"THROAT DEPTH16.1"FAST APPROACH SPEED200 ...more

95 Ton, Allsteel #95-8, CNC hydraulic press brake, 3-Axis Automec CNC 300, 8' overall, 78" between housing

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Allsteel
Model: 95-8
ManufacturerALLSTEELModel95-8Stock Number4267CAPACITY95 TONSOVERALL BED LENGTH8'DISTANCE BETWEEN UPRIGHTS78"THROAT DEPTH8"VARIABLE STROKE0 - 6"OPEN HEIGHT15"APPROACH SPEED190 IPMRETURN SPEED190 IPMVARIABLE PRESSING SPEED10 ...more

130 Ton, Accurpress Absolute #313010, hydraulic, Delem DA-56 CNC, 10' overall, 106" between housing, #2617/18

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Accurpress
Model: 313010
ManufacturerACCURPRESSModelABSOLUTE 313010Stock Number2617RAM FORCE (TONNES)130LENGTH OF BED120"DISTANCE BETWEEN FRAMES106"BED HEIGHT34"BED CAP. WIDTH7"LENGTH128"HEIGHT102DEPTH69STROKE10"RAM OPEN HEIGHT18.5"RAM CLOSED HEIGHT10.5"THROAT DEPTH18FAST APPROACH307"/MIN.SLOW ...more

130 Ton, Accurpress #713010, CNC press brake, 10' overall, 100" between housing, ETS 200 Control, 15 HP, 2011

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Accurpress
Model: 713010
Year: 2011
ManufacturerACCURPRESSModel713010Year2011Stock Number4322TONNAGE CAPACITY130 TONSLENGTH OF BED10'DISTANCE BETWEEN FRAMES100"BED HEIGHT34"STROKE8"OPEN HEIGHT14"CLOSED HEIGHT6"THROAT DEPTH10"FAST APPROACH SPEED115 IPMSLOW BEND SPEED24 IPMFAST ...more

160 Ton, Allsteel #160-20, CNC hydraulic brake, 20' overall, 222" between housing, 1-Axis Autogauge CNC Back Gauge Control

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Allsteel
Model: 160-20
ManufacturerALLSTEELModel160-20Stock Number4302TONNAGE160 TONSOVERALL BENDING LENGTH20'DISTANCE BETWEEN FRAMES222"BENDING CAPACITIES10 GAUGE X 18', 3/16" X 14', 1/4" X 10'MOTOR30 HPAPPROX. ...more

175 Ton, Accurpress Edge #417512, CNC hydraulic press brake, 12' overall, 126" between housing, new, #3250

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Accurpress
Model: 417512
ManufacturerACCURPRESSModelEDGE 417512Stock Number3250TONS175 TONLENGTH OF BED144"DISTANCE BETWEEN FRAMES126"BED HEIGHT34"TOP BED WIDTH6"LENGTH OF RAM STROKE10"RAM OPEN HEIGHT18"RAM CLOSED HEIGHT8"THROAT ...more

175 Ton, Wysong #MTH175-144, CNC hydraulic press brake, 12' overall, 126" between housing, 8" stroke, 1999

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Wysong
Model: MTH175-144
Year: 1999
ManufacturerWYSONGModelMTH 175-144Year1999Stock Number4273TONNAGE175 TONOVERALL BENDING LENGTH144"DISTANCE BETWEEN FRAMES126"STROKE8"OPEN HEIGHT19"CLOSED HEIGHT9"MOTOR15 HPELECTRICS575 V/3/60APPROX. WEIGHT25,800 LBS.THROAT DEPTH8"APPROACH SPEED300 IPMPRESS SPEED22 ...more

250 Ton, Accurpress #425012, hydraulic, 12' overall, 126" between housing, 12" stroke, Vision P12 CNC, new in stock

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Accurpress
Model: 425012
ManufacturerACCURPRESSModel425012Stock Number4066TONNAGE250 TONOVERALL BENDING LENGTH144"DISTANCE BETWEEN FRAMES126"STROKE12"OPEN HEIGHT20"CLOSED HEIGHT8"APPROX. APPROACH SPEED320"/MIN.APPROX. BENDING SPEED24"/MIN.APPROX. RETURN SPEED260"/MIN.BED HEIGHT36"TOP BED WIDTH5"THROAT ...more

250 Ton, Wysong #MTH250-144, CNC hydraulic press brake, 12' overall, 126" between housing, 10" stroke

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Wysong
Model: MTH250-144
ManufacturerWYSONGModelMTH250-144Serial NumberMT19-132XStock Number4336TONNAGE CAPACITY250 TONLENGTH OF BED144"DISTANCE BETWEEN FRAMES126"STROKE10"MAX. DAYLIGHT19"MIN. DAYLIGHT9"THROAT DEPTH10"ADVANCE SPEED250 IPMPRESSING SPEED20 IPMRETURN SPEED200 IPMMAIN ...more

CNC Punch Press - Miscellaneous

1 Result

30 Ton, Euromac #BX-Autoindex-1000/30, CNC hydraulic punch,.02"-.27" thick, 2008

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Euromac
Model: BX-AUTOINDEX-1000/30
Year: 2008
ManufacturerEUROMACModelBX AUTOINDEX 1000/30Year2008Stock Number4319MAX. PUNCHING FORCE30 TONY-AXIS TRAVEL W/MULTI-TOOL/MONOPUNCH39"POSITIONING ACCURACY=/- 0.05 MMOPENINGS OF CLAMPS (MM) - STANDARD.43"THICKNESS RANGE.02" ...more

Haas #GR-510, CNC router, 53" x 122" table, 121" X, 61" Y, 17" Z, 10000 RPM, coolant, 2003

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: CNC Routers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: GR-510
Year: 2003
ManufacturerHAASModelGR-510Year2003Stock Number4303TABLE WIDTH53"TABLE LENGTH122"NUMBER OF AXIS3X-AXIS TRAVEL121"Y-AXIS TRAVEL61"Z-AXIS TRAVEL11DISTANCE BETWEEN COLUMNS62"SPINDLE SPEED10,000 RPMTOOL CHANGER20 STATIONSPINDLE NOSE TO TABLE13.5" ...more

CNC Turret Punch Press Machine

3 Results

22 Ton, Strippit LVD #Delta-1000DK, 20 pos., 49" x39" sheet, Autocon Tech MNC 32000

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Strippit
Model: DELTA-1000DK
ManufacturerSTRIPPITModelDELTA 1000 TKYear1999Stock Number3968PUNCHING CAPACITY22 TONMAX. SHEET SIZE49" X 39"X-AXIS TRAVEL49"Y-AXIS TRAVEL39"X-AXIS TRAVEL WITH SHEET REPO.101"MAX. SHEET THICKNESS1/4"PUNCHING ...more

30 Ton, Euromac #MTX1250, CNC hydraulic turret punch, 6 station, tooling, 2008

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Euromac
Model: MTX1250
Year: 2008
ManufacturerEUROMACModelMTX 1250Year2008Stock Number4318X-AXIS TRAVEL49.2" / 88.6" / 98.43"Y-AXIS TRAVEL W/ MULTI-TOOL49.2" / 51.2"Y-AXIS TRAVEL W/ MONO PUNCH49.2" / ...more

33 Ton, Amada #Vipros-357-Queen, Fanuc 18P, 50" throat, 45 station thick turret, 2000

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Amada
Model: VIPROS-357-QUEEN
Year: 2000
ManufacturerAMADAModelVIPROS 357 QUEENYear2000Stock Number3935Max. tonnage capacity33 TONSMax. sheet size ( without repo)50" X 72"Max. sheet size w/repo50" X ...more

CNC Vertical Bed Mills

1 Result

Milltronics #RH20, CNC milling machine, Centurion 7 Control, 16" x54" table, 24/15 HP, 2005

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Milltronics
Model: RH20
Year: 2005
ManufacturerMILLTRONICSModelRH20Year2005Stock Number4317Table size16" X 54"Max. feedrate.0 TO 300 IPMSpindle motor24 / 15 HPSpindle taperCT40Approx. weight8,000 LBS.Spindle speeds50 - ...more

Coordinate Measuring Machines (CMM)

1 Result

Brown & Sharpe #ONE-7/10/7, coordinate measuring machine, 27.6" X, 39.4" Y, 25.6" Z, PC DMIS CAD s/w, 2005

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Brown & Sharpe
Model: ONE-7/10/7
Year: 2005
ManufacturerBROWN & SHARPEModelONE 7.10.7Year2005Stock Number4187X-AXIS27.6"Y-AXIS39.4"Z-AXIS25.6"CAPACITY1,100 LBS. PH10T RENISHAW PROBEPC-DMIS CAD SOFTWARECOMPUTER SYSTEM ...more

Deburring Machines

1 Result

Timesavers #Series-3100, wet type, 37" x60" belt, 15-45 FPM, 38" passline, coolant tank, 2009

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Timesavers
Model: SERIES-3100
Year: 2009
ManufacturerTIMESAVERModel3121-13-04Year2009Serial NumberSN31624Stock Number4075CAPACITY37"FEED SPEED15 - 45 FPMPASSLINE38"BELT LENGTH37" X 60". 6" DIAMETER DRUM - 20 HP6" DIMAETER BRUSH ...more

18" x 60" Powerturn lathe, 10.4" swing over cross slide, 2.283" spindle bore, 3-jaw 10"chuck, 4-jaw 12"chuck, Steady Rest, follow rest, 7.5 HP, 25-2000 RPM, #3996

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Engine Lathes
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Powerturn
ManufacturerPOWERTURNStock Number3996SWING OVER BEDWAYS18"SWING OVER CROSS SLIDE10.4"SWING IN GAP27"WIDTH OF BED11.85"CENTER DISTANCE60"SPINDLE NOSE CAMLOCKD1-6SPINDLE BORE2.283"SPINDLE SPEEDS (12)25 - ...more

18" x 60" Powerturn, preciison lathe, 10.4" swing over cross slide, 3.14" spindle bore, 3 & 4-jaw chucks, new

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Engine Lathes
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Powerturn
ManufacturerPOWERTURNStock Number4343SWING OVER BEDWAYS18"SWING OVER CROSS SLIDE10.4"SWING IN GAP27"WIDTH OF BED11.85"CENTER DISTANCE60"SPINDLE NOSE CAMLOCKD1-8SPINDLE BORE3.14"SPINDLE SPEEDS (12)25 - ...more

20" x 80" Acraturn #CS20" GC, heavy duty engine lathe, AcuRite 2-Axis digital read out, 3 & 4-jaw chuck

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Engine Lathes
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Acraturn
Model: CS20GC
ManufacturerACRATURNModelCS20"GCStock Number4340SWING OVER BED20"DISTANCE BETWEEN CENTERS80"SPINDLE SPEEDS36 - 1600 RPMSPINDLE BORE4-1/8"ELECTRICS575V/3/60SWING IN GAP29". EQUIPPED WITH:. 2-AXIS ACU-RITE DIGITAL ...more

20" x 80" Cy-Drummond #CY20B, engine lathe, 12" swing over cross slide, 3 & 4-jaw chucks, 2-Axis digital read out

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Engine Lathes
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Cy-Drummond
Model: CY20B
ManufacturerCY-DRUMMONDModelCY20BStock Number4151SWING OVER BED20"SWING IN GAP28"SWING OVER CROSS SLIDE12"EFFECTIVE LENGTH IN GAP9-1/2"MAX. DISTANCE BETWEEN CENTERS80"SPINDLE THRU BORE DIAMETER3-7/32"SPINDLE ...more

20" x 80" Tos #SUI50/2000, engine lathe, 10" chucks, inch/metric, quick change tool post, 11 HP

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Engine Lathes
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Tos
Model: SUI50/2000
ManufacturerTOSModelSUI 50/2000Stock Number4103SWING OVER BED20.5DISTANCE BETWEEN CENTERS80"SWING OVER CROSS SLIDE12-1/2SPINDLE SPEEDS14 - 2240 RPMSPINDLE BORE2-3/8"ELECTRICS575V/3/60HORSEPOWER11 HPAPPROX. WEIGHT8,000 LBS. ...more

22" x 78" Whacheon #WL580X2000, engine lathe, 3 & 4-jaw chuck, 2-Axis Fagor digital read out

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Engine Lathes
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Whacheon
Model: WL580X2000
Year: 2007
ManufacturerWHACHEONModelWL580X2000Stock Number4275SWING OVER BED22"DISTANCE BETWEEN CENTERS80"SPINDLE BORE3-1/8"SPINDLE SPEED RANGE28 - 1350 RPMELECTRICS550V/3/60MAIN MOTOR HP15 HP. 2-AXIS FAGOR DIGITAL ...more

Nicolas Correa #Euro-2000, gantry type, 78.7" X Travel, 49.2" Y Travel, 25.5" Z, 10k RPM, 24 automatic tool changer, 1998

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Nicolas Correa
Model: EURO-2000
Year: 1998
ManufacturerNICOLAS CORREAModelEURO 2000Year1998Stock Number4004TABLE AREA78.7" X 39.3"X-AXIS TRAVEL78.7"Y-AXIS TRAVEL49.2"Z-AXIS TRAVEL25.5"SPINDLE SPEEDS10 000 RPMMAIN SPINDLE MOTOR35 HPSPINDLE TAPERCAT 40 ...more

Gear Head Drills

1 Result

Drillmaster #Z5035, geared head drill, 1-3/8" cap., 22" x15" tbl, 2 HP, coolant system, new, #3473

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Drillmaster
Model: Z5035
ManufacturerDRILLMASTERModelZ5035Stock Number3473DRILLING CAPACITY - MILD STEEL1-3/8"DRILLING CAPACITY - CAS1-1/2"TAPPING CAPACITY IN MILD STEEL1"SPINDLE TRAVEL7-1/8"SPINDLE SPEEDS120- 1740 RPMSPINDLE TAPERSMT ...more

H Frame Hydraulic Press Machines

1 Result

50 Ton, RK Machinery #HFP-50T, hydraulic H frame press, 12" stroke, 6" bore, 10 HP

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Rk Machinery
Model: HFP-50T
ManufacturerRK MACHINERYModelHFP-50TStock Number4320CAPACITY ( TONS )50 TONSSTROKE12"BORE6"DISTANCE BETWEEN FRAMES32"TABLE WIDTH10"ELECTRICS600V/3/60MOTOR10 HP. PALM BUTTON PEDESTAL CONTROLADJUSTABLE BED - MANUALPRESSURE ...more

Phoebus #PBM-GEVS500A, vertical & horizontal milling machine, 14-1/2" x 58" table, 2012

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Phoebus
Model: PBM-GEVS500A
Year: 2012
ManufacturerPHOEBUSModelPBM-GEVS500AYear2012Stock Number4256TABLE AREA14-1/2" X 58"X-AXIS TRAVEL36.2"Y-AXIS TRAVEL20.4"Z-AXIS TRAVEL17.3"SPINDLE TAPER#40SPINDLE SPEEDS - VERTICAL60 - 3600 RPM - VARIABLE ELECTRICSPINDLE ...more

13.7" x 13.7" Sawmaster #BS350Z, swivel frame, dual post, semi-auto horizontal mitering band saw, new

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Sawmaster
Model: BS350Z
ManufacturerSAWMASTERModelBS350ZStock Number4135Cutting Capacity: 90 Deg. Rounds13.77"90 Deg. Square13.77" x 13.77"45 Deg. Rounds10.62"45 Deg. Square10.62" x 10.62"Blade Size178" x ...more

16" x 16" Hyd-Mech #H16A, automatic band saw, PLC-100 programmable Control, coolant system

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Hyd-Mech
Model: H16A
ManufacturerHYD-MECHModelH16AStock Number4228CAPACITYROUND 16" DIAMETER / SQUARE 16" X 16" BLADE1 1/2" WIDTH BLADE SPEED75-400 SFM (VARIABLE ...more

Horizontal CNC Machining Centers

3 Results

Daewoo Doosan #DHP-4000, Fanuc 18i, 23.6" X, 22" Y, 23.6" Z, 14000 RPM, 120 automatic tool changer, coolant thru spindle, 2007

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Daewoo Doosan
Model: DHP-4000
Year: 2007
ManufacturerDOOSANModelDHP-4000Year2007Stock Number4324X-AXIS TRAVEL23.6"Y-AXIS TRAVEL22.05"Z-AXIS TRAVEL23.6"NO. OF STATIONS ON ATC120SPINDLE TAPERCAT -40MAX. SPINDLE SPEED14 000RAPID FEED RATE - X ...more

Daewoo Doosan #HC-400, horizontal machining center, Fanuc 32i, 23.6" X, 22" Y, 22.2" Z, 10000 RPM, 60 automatic tool changer, coolant thru spindle, 2013

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Daewoo Doosan
Model: HC-400
Year: 2013
ManufacturerDOOSANModelHC-400Year2013Stock Number4323TRAVELS23.62" x 22.05" x 22.24"SPINDLE TAPERCAT -40SPINDLE SPEED10 000 RPMPALLET SIZE15.75" x 15.75"PALLET INDEXINGFULL 4TH AXIS. FANUC ...more

Makino #MCC2013, die/mold horizontal machining center, Pro 3, 78.7" X, 53.1" Y, 39.4" Z, 15000 RPM, 30 automatic tool changer, 2002

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Makino
Model: MCC2013
Year: 2002
ManufacturerMAKINOModelMCC2013Year2002Stock Number4282CONTROL TYPEMAKINO PROFESSIONAL 3TABLE SIZE86.6" X 39.4"MAX. WORKPIECE SIZE98.4" X 43.3" X 66.9"CROSS TRAVEL (X)78.7"VERTICAL TRAVEL (Y)53.1"LONGITUDINAL ...more

Hydraulic Press Brakes

2 Results

35 Ton, Allsteel #35-6, hydraulic press brake, 6' overall, 62" between housing, 0-4" variable stroke, 7.5 HP

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Allsteel
Model: 35-6
ManufacturerALLSTEELModel35-6Serial Number35576Stock Number4288TONNAGE35 TONOVERALL BENDING LENGTH72"BENDING CAPACITY14 GA. X 6' MILD STEELDISTANCE BETWEEN FRAMES62"STROKE0 - 4" VARIABLEOPEN HEIGHT11.5"MOTOR7.5 ...more

65 Ton, Piranha / Allsteel #6508, hydraulic press brake, 8' overall, 78" between housing, 6" adj stroke

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Piranha
Model: 6508
ManufacturerPIRANHA / ALLSTEELModel6508Serial Number1031Stock Number4290Capacity65 TONSOpen height15"Press speed.25 IPSReturn speed.75 IPSThroat depth8"Closed height9"Approach speed.75 IPSStroke, adjustable6"Bed height from ...more

4500 lb. Presto lifts, self leveling pallet carousel & skid positioner, 35-3/4" x36-1/2"

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Presto
ManufacturerPRESTO LIFTSStock Number4178LENGTH35-3/4"WIDTH36-1/4"CAROUSEL OUTSIDE DIAMETER43-5/8"LOWERED HEIGHT9-1/2"MAX. CAPACITY4,500 LBS.MIN. CAPACITY400 LBS.RAISED HEIGHT27-3/4"APPROX. WEIGHT OF MACHINE400 LBS. SELF-LEVELINGREINFORCED RUBBER AIRBAGFORK ...more

Notching Machines

2 Results

1/8" x 6" x 6" Pierce-All, hydraulic notcher, 3 HP, electric foot pedal control

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Pierce-All
ManufacturerPIERCE-ALLStock Number4297CUTTING CAPACITY6" X 6"CUTTING THICKNESS1/8"ELECTRICS575V/3/60MOTOR3 HP. ELECTRIC FOOT PEDAL CONTROL.

1/4" x 7.87" x 7.87" FIM #GOAL-200/6, hydraulic corner notcher, foot pedal operation

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Fim
Model: GOAL-200/6
ManufacturerFIMModelGOAL 200/6Stock Number4291CUTTING THICKNESS6 MMNOTCHING CAPACITY7.87" X 7.87". FOOT PEDAL CONTROLANGLE GUIDES & SLIDES.

16 gauge x 4.4' Wysong #H-1652, hydralic shear, 26" rear operated manual back gauge, squaring arm, support arm

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Wysong
Model: H-1652
ManufacturerWYSONGModelH-1652Stock Number4287CUTTING CAPACITY16 GA. - MILD STEELCUTTING LENGTH52"BACK GUAGE RANGE - MANUAL26". REAR OPERATED MANUAL BACKGAUGESQUARING ARMSUPPORT ARMFOOT ...more

.25" x 10' Accurshear #625010, hydraulic shear, 16 hold downs, 10' squaring arm, new, #3202

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Accurshear
Model: 625010
ManufacturerACCURSHEARModel625010Stock Number3202CUTTING CAPACITY1/4"LENGTH10'KNIFE SIZE INCHES1" X 3" X 124"NO. OF HOLD DOWNS16HOLD DOWN TONNAGE16CYCLES PER MINUTE - FULL ...more

1/4" x 12' Accurshear #625012, hydraulic shear, 36" Back Gauge, 10' sq arm, 19 holddowns, 20 HP, new

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Accurshear
Model: 625012
ManufacturerACCURSHEARModel625012Stock Number4067CUTTING CAPACITY1/4"LENGTH12'KNIFE SIZE INCHES1" X 3" X 148"NO. OF HOLD DOWNS19HOLD DOWN TONNAGE19CYCLES PER MINUTE - FULL ...more

5/16" x 10' Gasparini #CO-3006, hydraulic shear, 17 hold downs, Delem DAC 310 Back Gauge, 2005

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Gasparini
Model: CO-3006
Year: 2005
ManufacturerGASPARINIModelCO 3006Year2005Stock Number4203CUTTING CAPACITY5/16"( 8 Mm) LENGTH10'NO. OF HOLD DOWNS17THROAT DEPTH19". EQUIPPED WITH:. DELEM DAC 310 BACK GAUGE ...more

3/8" x 10' Pearson, hydraulic shear, squaring arm, support arms, spare set of blades

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Pearson
ManufacturerPEARSONStock Number4245CUTTING CAPACITY3/8"LENGTH10'. SQUARING ARMSUPPORT ARMSSPARE SET OF BLADESNO BACKGAUGE ON THIS MACHINE.

Precision and Second Operation Lathes

3 Results

Powerturn, precision lathe, 18" swg, 40" cc, 10.4" SOCS, 2.125" bore, 7.5 HP, #4MT, new, #3474

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Powerturn
ManufacturerPOWERTURNStock Number4342SWING OVER BEDWAYS18"SWING OVER CROSS SLIDE10.4"SWING IN GAP27"WIDTH OF BED11.85"CENTER DISTANCE40"SPINDLE NOSE - CAMLOCKD1-6"SPINDLE BORE2.283"SPINDLE SPEEDS (12)25 ...more

Powerturn, precision lathe, 22" swing, 80" centers, 13-3/4" swing over cross slide, 4-1/8" bore, 10 HP, #5MT, new, #3119

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Powerturn
ManufacturerPOWERTURNStock Number3119SWING OVER BEDWAYS22"SWING OVER CROSS SLIDE13-3/4"SWING IN GAP31"CENTRE DISTANCE80"SPINDLE BORE4-1/8"SPINDLE NOSE - CAMLOCKD1 - 8"SPINDLE SPEEDS (12)26 ...more

Powerturn, precision lathe, 20" swg x 60" cc, 12" swing over cross slide, 3-1/8" spindle bore, new, in stock

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Powerturn
ManufacturerPOWERTURNStock Number4025SWING OVER BEDWAYS20"MAX. SWING OVER CROSS SLIDE12"SWING IN GAP28-1/2"CENTER DISTANCE60"SPINDLE BORE3-1/8"SPINDLE NOSE - CAMLOCKD1-8SPINDLE SPEEDS25 - 1600 ...more

Radial Drills

2 Results

3.4' MAS #VR2, 16" x20-1/2" work table, power elevatiopn, coolant, 90-4500 RPM, #4153

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Radial Drills
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Mas
Model: VR2
ManufacturerMASModelVR2Stock Number4153SPINDLE SPEEDS90 - 4500 RPMMORSE TAPER3 MTMAX. SPINDLE CENTER TO COLUMN31.9"ARM LENGTH40"APPROX. WEIGHT3,500 LBS. 16" x 20-1/2" ...more

4' -11.81" Kao Ming #KMR-1100S, radial arm drill, #MT4,20" x29" box table, coolant

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Radial Drills
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Kao Ming
Model: KMR-1100S
ManufacturerKAO-MINGModelKMR-1100SStock Number4333SPINDLE HEAD LONGITUDINAL TRAVEL30.25"VERTICAL ARM TRAVEL27.55"SPINDLE CENTER TO COLUMN CENTER19.88" - 49.21"SPINDLE CENTER TO COLUMN FACE13.97" - ...more

Reciprocating Surface Grinders - Horizontal Spindle

5 Results

6" x 12" Targa #612, manual surface grinder, magnetic chuck

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Targa
Model: 612
ManufacturerTARGAModel612Stock Number4159TABLE TRAVEL LONGITUDINAL12-5/8"CROSSFEED TRAVEL6-11/16"APPROX. WEIGHT500 LBS. 6" X 12" MAGNETIC CHUCK.

6" x 18" Chevalier #FSG-618M, manual surface grinder, magnetic chuck, 3 HP, 3450 RPM

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Chevalier
Model: FSG-618M
ManufacturerCHEVALIERModelFSG-618MStock Number4212Table size5.75" x 18"Max grinding width6"Grinding wheel bore1.25"Longitudinal travel (x axis)19"Max grinding length18"Grinding wheel width0.5"Grinding wheel diameter8"Crossfeed ...more

6" x 18" Chevalier #FSG-618M, manual surface grinder, 8" x .5" grinding wheel, 3 HP

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Chevalier
Model: FSG-618M
ManufacturerCHEVALIERModelFSG-618MStock Number4334Table size5.75" x 18"Max grinding width6"Grinding wheel bore1.25"Longitudinal travel (x axis)19"Max grinding length18"Grinding wheel width0.5"Grinding wheel diameter8"Crossfeed ...more

6" x 18" Jones & Shipman #540P, precision hydraulic surface grinder, electromagnetic chuck, power rapid

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Jones & Shipman
Model: 540P
ManufacturerJONES & SHIPMANModel540PStock Number4338WIDTH & LENGTH GROUND6" X 18"LONGITUDINAL TABLE TRAVEL19"CROSS TRAVEL6-3/4"LONGITUDINAL TABLE SPEED5' TO 60' FPMONE REV. ...more

12" x 24" Perfect #3060AH-D4, fully automatic surface grinder, electromagnetic chuck, digital read out, coolant system, #3684

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Perfect
Model: 3060AH-D4
ManufacturerPERFECTModel3060AH-D4Stock Number3684GRINDING SURFACE OF TABLE12" X 24"MAX. GRINDING SURFACE12" X 24"MAX. DISTANCE CENTER OF SPINDLE TO TABLE21.6"TOTAL MAX. ...more

25 KVA Sip #4643R, spot welder, 22" throat, foot pedal Control, 230 V., 60 Hz, 1 phase

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Sip
Model: 4643R
ManufacturerSIPModel4643RStock Number4194CAPACITY25 KVATHROAT DEPTH22"VOLTS230V / 60 Hz / PH 1SHORT CIRCUIT SECONDARY CURRENT18000. FOOT PEDAL CONTROL.

Gardner-Denver #L75, Gardner Denver fixed speed rotary screw air compressor, 100 HP, 14350 hours, 2018

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Gardner Denver
Model: L75
Year: 2018
ManufacturerGARDNER DENVERModelL75Year2018Serial NumberS558910Stock Number4223HORSE POWER100PSI100/125/190ACFM485/439.1/368.2DBA75APPROX. WEIGHT3,900 LBS.ELECTRICS575V/3/60DISCHARGE PRESSURE130 PSIG. STANDARD TEFC MAIN MOTORSWYE-DELTA STARTERSGD PILOT TS MICROPROCESSOR CONTROLLERSQUIET ...more

12.2" Haas #HRT-310, 4th axis rotary table, 6 precision t-slots, new, 2021

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Rotary Tables
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: HRT-310
Year: 2021
ManufacturerHAASModelHRT-310Year2021Stock Number4270PLATTER DIAMETER12.2"MAX. WEIGHT ON PLATTER (W/SUPPORT)435 LBS.MAX. WEIGHT ON PLATTER (UNSUPPORTED)218 LBS.NUMBER OF STD. T-SLOTS6 @ 60MAX. ...more

Automec, CNC front guaging system for shears, #3718

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Shear Blades
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Automec
ManufacturerAUTOMECStock Number3718SQUARING ARM10'2 x AUXILLARY ARMS5' EACH. All three drives can be programmed independently for angle cuttingSlope angle ...more

Single Crank OBI Flywheel Press Machines

1 Result

40 Ton, Brown & Boggs #15LW, OBI punch press, 2-1/2" stroke, 8 - 10-1/4" Shut Height, air clutch & brake

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Brown & Boggs
Model: 15LW
ManufacturerBROWN BOGGSModel15LWStock Number4298Motor3 HPSpeed100 SPMStroke2-1/2"Tonnage40 TONSElectrics550 V/ 3 / 60Adjustment2-1/2"Shut height8 - 10-1/4"Bed l-r x f-b28-1/4" X 18-1/2"Ram ...more

Straight Side Double Crank (Single Action) Press Machines

1 Result

60 Ton, Rousselle #6B-60, straight side press, 4" stroke, 13-1/2" Shut Height, 50 SPM, air clutch & brake

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Rousselle
Model: 6B-60
ManufacturerROUSELLEModel6B-60Serial Number17746Stock Number4246BED AREA60" X 30"RAM AREA48" X 16"TONNAGE60 TONSTROKE4"SHUT HEIGHT13-1/2"ADJUSTMENT3"STROKES PER MINUTE50. PALM PEDESTAL CONTROLSAFETY LIGHT CURTAINSAIR ...more

10000 lb. Mecon #10024, motorized uncoiler, 60" outside dimensions, 18" ID, 6 keeper arms, manual expansion

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Mecon
Model: 10024
ManufacturerMECONModel10024Serial Number108507Stock Number4224MAX. COIL WEIGHT10,000 LBS.MAX. COIL O.D.60"MAX. I.D.18". . 6 KEEPER ARMSMANUAL EXPANSIONMANUAL SPEED CONTROL ...more

Universal Cylindrical Grinding Machines

1 Result

14" x 59" Kellenberger, cylindrical grinder, 8.8" x .787" grinding wheel, 68.89" long travel

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Kellenberger
Manufacturer KELLENBERGER. CENTER HEIGHT 6.89" ( 175 MM ). DISTANCE BETWEEN CENTERS 59" ( 1500 MM ). GRINDING ...more

Vertical CNC Machining Centers

8 Results

Breton Eagle #1500/2T-SK60, 5-Axis gantry vertical machining center, 236" X, 98.4" Y, 59" Z, 28000 RPM, 30 automatic tool changer, 2018

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Breton
Model: 1500/2T-SK60
Year: 2018
ManufacturerBRETONModel1500/2T SK 60Year2018Stock Number4008TABLE AREA255" x 78"X-AXIS TRAVEL236"Y-AXIS TRAVEL98.4"Z-AXIS TRAVEL59"MAX. TABLE LOAD1,322 LBS.NO. OF STATIONS ON ATC30SPINDLE TAPERHSK ...more

Dah Lih #DL-MCV1020BA, CNC vertical machining center, Fanuc 18M, 40" X, 21" Y, 22" Z, chip auger

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Dah Lih
Model: DL-MCV1020BA

Dah Lih #DL-MCV2100, vertical machining center, Fanuc 18iM, 82.7" X, 33.5" Y, 29.9" Z, 6000 RPM, 32 automatic tool changer, 2004

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Dah Lih
Model: DL-MCV2100
Year: 2004
ManufacturerDAHLIHModelDL-MCV2100Year2004Stock Number4337TABLE AREA90.5" L x 38" WX-AXIS TRAVEL82.7"Y-AXIS TRAVEL33.5"Z-AXIS TRAVEL29.9"MAX. TABLE LOAD6600 LBS NO. OF STATIONS ON ATC32SPINDLE ...more

Elumatec #SBZ-122/30, aluminum profile CNC machining center, 137.7" X, 13.7" Y, 11" Z, 21000 RPM, 3-Axis, 2006

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Elumatec
Model: SBZ-122/30
Year: 2006
ManufacturerELUMATECModelSBZ 122/30Year2006Stock Number4277X-AXIS TRAVEL137.7"Y-AXIS TRAVEL13.7"Z-AXIS TRAVEL11"SPINDLE SPEED21,000 RPMTRAVERSE SPEED X-AXIS262 FPMTRAVERSE SPEED Y-AXIS164 FPMTRAVERSE SPEED Z-AXIS164 FPMAPPROX. WEIGHT ...more

Haas #VF-3, CNC vertical machining center, 20 automatic tool changer, 40" X, 20" Y, 25" Z, 7500 RPM, #40, chip auger, 1998

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: VF-3
Year: 1998
ManufacturerHAASModelVF-3Year1998Stock Number4252X-AXIS TRAVEL40"Y-AXIS TRAVEL20"Z-AXIS TRAVEL25"TABLE AREA48" X 18"RAPID TRAVERSE RATE710 IPMCUTTING FEED RATE500 IPMSPINDLE NOSE TO TABLE4" - ...more

Haas #VR-8, CNC vertical machining center, 64" X, 40" Y, 30" Z, 15000 RPM, 32 automatic tool changer, Cat 40,30 HP, 2007

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: VR-8
Year: 2007
ManufacturerHAASModelVR-8Year2007Stock Number4304X-AXIS TRAVEL64"Y-AXIS TRAVEL40"Z-AXIS TRAVEL30"SPINDLE SPEED15,000 RPMSPINDLE TAPERCAT 40SPINDLE MOTOR30 HPTOOL MAGAZINE CAPACITY32 ATC. HAAS CNC CONTROLLINEAR SCALESSPINDLE ...more

Matsuura #MC-500V2, 20" X, 14" Y, 17.7" Z, 6000 RPM, 20 automatic tool changer, 15" x34" table, BT35, #3713

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Matsuura
Model: MC-500V2
ManufacturerMATSUURAModelMC-500V2Year1985Stock Number3713X-AXIS TRAVEL20"Y-AXIS TRAVEL14"Z-AXIS TRAVEL17.7"TABLE SIZE15" X 34"SPINDLE TAPERBT35SPINDLE SPEED6000 RPMSPINDLE MOTOR7 HPTOOL CHANGER CAPACITY20APPROX. WEIGHT8,000 LBS ...more

Milltronics #TT24, vertical machining center, 24" X, 25" Y, 20" Z, 10000 RPM, 26" x22" tbl, 24 HP, Milltronics 7200

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Milltronics
Model: TT24
ManufacturerMILLTRONICSModelTT-24Year2007Stock Number3883TABLE SIZE26" X 22"MAX TABLE LOAD2000 LBSX-AXIS24"Y AXIS25"Z AXIS20"RAPID TRAVERSE1600 IPMSPINDLE MOTOR24 HPSPINDLE SPEED10 000 RPMMACHINE WEIGHT16 ...more

Diversitech, 3' x 4' downdraft table

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Welding Table
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Diversitech
ManufacturerDIVERSITECHStock Number4301.

Fanuc #Robocut-Alpha-OB, CNC wire Electrical Discharge Machine, Fanuc 16W CNC Control, 11.8" X, 7.9" Y, 5.9" Z, 1994

Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Fanuc
Model: ROBOCUT-ALPHA-OB
Year: 1994
ManufacturerFANUCModelALPHA--OBYear1994Stock Number4300INSIDE TANK DIMENSIONS35.2" X 25.5"MAX. WORKPIECE SIZE25.6" X 16.5" X 5.9"TRAVELS (X,Y,Z)11.8", 7.9", 5.9"TAPER ANGLE0 - 15 ...more