Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

SERIAL. 896A-108-01, MODEL. 6A, PUNCHING CAPACITY. 105 TONS, PUNCHING SIZE. 1-5/16" HOLE THUR 1" THICK, DEPTH OF THROAT. 24", ANGLE SHEARING. 6" X 6" X 1/2", PLATE. 1/2" X 21" TO 3/4" X 10", ROUNDS. 2-1/4", SQUARES. 2", TEES. 4" X 4" X 1/2", COPING CAPACITY. 3-1/4" X 3-1/4" X 1/2", NOTCHING CAPACITY. 3-1/4" X 4-1/2" X ...more

Rohrer Crop Shear, -Capacity: 0.375" x 60", -Blade Length: 68", -(2) Mechanical Screw Jack Operated, Duff-Norton SK 1850-1, -Motor Missing to Operate Screw Jacks, -Passline Height: 15.5", -Overall size: 119" L x 28" W x 89" High, -In Storage: Toledo, OH..

Make: Cincinnati, Model: 500HS-10, Year: 1990, Machine Location: Illinois, Capacity: 10′ x 1/2″, Cutting Length: 122-3/4″, Maximum Rake: 1/2″ Per Foot, Hold Downs: 13, Hold Down Force: 20.6 Tons, Speed: 19 to 53 Strokes Per Minute, Electrical: 480V/3PH, Approx. Shipping Weight: 25,000 Lbs. ...more

SERIAL. 326888T, MODEL. HS414, LENGTH OF BLADES. 52", CAPACITY, MILD STEEL. 14 GAUGE, CUTS PER MINUTE. 40, HYDRAULIC MOTOR. 3 HP, MACHINE PRICED LESS HYDRAULIC MOTOR.

SKU: 129255, Model: ED9-IW100-1P230-A, Condition: New, Electrical :, Voltage: 230 volts, Phase: Single-phase, Tons: 100 ton, Dimensions: 67.00 (H) x 69.00 (W) x 46.00 (L) inches, Additional :, Stocker Number: ED9-IW100-1P230-A, Amperes: 22 Amp, Angle Shear Max Capacity 1/2": 6 x 6, Angle Shear Work Height: ...more

4 Foot Mechanical Shear - 12Ga. Electric Shearing Machine - Single Phase, SKU: EPS-0412M-1PH, Shop our 4 foot mechanical shears that are capable of cutting up to 12 gauge mild steel and 16 gauge stainless. Our sheering machines are designed as a low maintenance design with an array of s that will add value to any ...more

Used Pfaudler model 5RW drive. 15 HP, 230/460 volt motor, vari-speed. 20:1 ratio, 117 rpm output speed. Mechanical seals., PFAUDLER 5RW.

Used 3 HP Lightnin agitator drive, model 82-S-3, right angle design, 155 RPM output, 11.5:1 ratio, mechanical seal, explosion proof, serial# 716382.

Brand: CaterpillarModel: D3306B DITAPower:225KWCondition: UsedSerial #:9NR01122Ref #: UC2269, D3306 B DITA CAT Gen Set; Mechanical Safety Shutoffs, Sr4 Generator, Open skid, Unit was tested, Repaired, Serviced and Painted. Represented as a good runner.

, 48” BG programmable w/ LED display, Auto swing up back stop, 12’ left hand squaring arm, Ball transfer table, Power blade clearance adjustment, Manufacturer Accurpress 16' x 1/2" Hydraulic Accurshear Model 850016 Year 1989 Condition Used Serial Number 1020 Stock Number 10552 Capacity 1/2" ...more

-Cut To Length Shear, -Capacity: 0.135" x 48", -Bow Tie Top Blade, -Blade Length: 54", -10 HP AC Drive Motor, 1755 RPM, 230/460 V, -Air Clutch & Brake, -48" Passline Height from Floor to top of bottom blade., -No spare blades, -Overall Size: 113" L x 54" W x 79" High, -In Storage: Toledo, OH.

Make: Mansteel, Model: MSH-10250, Year: 1900, Machine Location: Alberta, Canada, – Cutting Capacity: 1/4″ (6.35mm) mild steel, – Cutting Length: 10’6”, – Throat Depth: 5-7/8”, – Rake Angle: 1°30’, – Motor: 15 HP, – Weight: ~16,100 lbs, – ...more

Stock #: 121250002, Location: Utah, Brand: Accurl, Model: MS8-6x3200, Year: 2022, Approx. Shipping Weight: 20,000 lbs, Approx. Shipping Dimensions:, Loading Fee: Rigging Required, Cutting Capacity: 1/4" MS, Cutting Length: 10', Rake Angle: 0.5°~2.5°, Throat Depth: 5", Working Table Height: ...more

, 36” front operated power back gauge, Over rake for thicker material, Light curtains by front hold downs, Manufacturer Cincinnati 12' x 3/8" Hydraulic Shear Model 3DL12 Condition Used Serial Number 38644 Stock Number 10932 Overall cutting length 148" Distance between uprights 12' 3" Cut ...more

SERIAL. P30-620, MODEL. 1048, CAPACITY MILD STEEL. 12 GA, OVERALL LENGTH OF BLADES. 50, CUTTING LENGTH. 48", MANUAL BACKGAUGE. 24", STROKES PER MINUTE. 60, HOLD DOWNS. 8, FRONT ARM SUPPORTS. YES, FULL LENGTH FOOT TRIP. YES, MOTOR. 3 HORSEPOWER.

Stock #: 133250022, Location: UT, Brand: Accurl, Model: MS8-6x3200, Year: 2020, Approx. Shipping Weight: 20,000 lbs, Loading Fee: Rigging Required, Cutting Capacity: 1/4" MS, Cutting Length: 10', Rake Angle: 0.5°~2.5°, Throat Depth: 5", Working Table Height: 33.8", Blade Length: 129.9" ...more

Punching Station:, Capacity: 120 US Tons, Ø1-1/2” in 3/4” or Ø 1-1/4” in 1”, Maximum Round Punch that can be held Ø1-9/16”., Optional Attachments up to 4”, Throat Depth: 24”, Working Height: 45-1/2”, Safety:, •2 Stage foot pedal with low ...more

Punching Capacity 65 Ton Type Hydraulic Throat Depth 9" Capacity. Flat Bar Shear 24" Length Angle Shear. 90 Degrees 6" x 6" x 3/8" 45 Degrees 3" x 3" x 3/8" 45 Degrees With Bar Shear 4" x 4" x 1/2" Pipe Notcher (Schedule 40 I.D.) 3/4", 1", 1-1/4", 1-1/2", 2" Rectangle Notcher 2" x 2-1/2" x 3/8" 90 Degree V. Notcher 6" ...more

PUNCHING Max 1-1/16" thru 3/4" thick material or 65 tons Platen Surface 11" x 38" Capacity 65 tons COPING/NOTCHING 3 1/2" X 5" X 3/8" BLADE PLATE SHEAR 18" X 1/2", 12" X 3/4", 8" X 1" ANGLE SHEAR 5" X 5" X 1/2", Pre-Owned PIRANHA Ironworker, The PIRANHA PII-65 is a powerful and reliable ironworker, perfect for various ...more

Punching Capacity 120 Ton Special Tooling 4" Max. Dia. Throat Depth 12" Flat Bar Shear 24" Angle Shear 90 Degrees 6" x 6" x 1/2" Angle Shear 45 Degrees (With Bar Shear) 3" x 3" x 3/8" Brake 12" 75 Ton Brake 24" 55 Ton Open End Brake Max. 1/4" x 6" Pipe Notcher 3/4", 1" Schedule 40 1- 1/4" 90 Degrees V-Notcher 6" x 6" ...more

Capacity: 10' x 1/2"Overall Blade Length: 12"Distance Between Housings: 124"Floor to Top of Bed Distance: 35"Number of Hold Downs: 16Motor: 29 HPElectrical: 550V/3ph/60Hz, Front Operated Powered Backgauge w/ Mechanical Readout60" Squaring Arm w/ Support Leg(2) Front Support ArmsFlip Up Blade Safety GateMotorized ...more

Product Roper Whitney Pexto No. 455 Combination Angle Iron Shear, Notcher, BenderShear Capacity- 2″ x 2″ x 1/4″, Weight- 200 lbs, Blades are in good shape. Overall a good working unit..

Amada Marvel Spartan Ironworker, Heavy-Duty, Dual Cylinder, Completely Integrated, 126 Ton Capacity, 15 H.P., D 14" Throat, DX 24" Throat, 5 Work Stations, Simultaneous Dual Operation, Standard Work stations, Punching Station Punch station, Round and Square bar station, Angle shear station, 45 degree angle ...more

YEAR NEW. 2000, CAPACITY. 3/4" TO 1.75", CUTTING FORCE. 130 TONS, SHEAR LENGTH. 12" TO 36", MAXIMUM BAR LENGTH. 43' (3 - 15' BAR FEEDS), HYDRAULIC UNIT MOTOR. 100 HORSEPOWER, AUTO CYCLE. YES.

SCOTCHMAN HYDRAULIC IRONWORKER, MODEL: 50514-EC, STANDARD S, 50 Ton Punch Station, Keyed Punch Ram For Safety, 2" Die Holder, Punch Nut With Wrench and Stripper, One Round Punch & Die: Maximum Diameter 1", Adjustable Electric Stroke Control With Scale, Electric Remote Foot Pedal, 14" Flat Bar Shear With 4-Way ...more

Capacity (Mild Steel): 3/4", Cutting Length: 14', Strokes Per Minute (Full Stroke): 14, Strokes Per Minute (Short Stroke): 34, Back Gauge Range: 48", Number of Hold Downs: 22, Main Motor: 60 H.P., Approximate Dimensions: 301" x 110" x 106", Approximate Shipping Weight: 65,000 Lbs., Shear Control with LED Display ...more

Standard s:, ISO 9001 certifiedTaiwan machines24” SIKO Front Operated power back gauge w/ micro adjustment 0.004”, inch/mm digital displayQuick Change Blade Gap Adjustment (BGA), with gap dialCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate ...more

, Backgauge w/DRO, (2) Squaring Arms, (2) Support Arms, Manufacturer Heller Model HSC630 Year 2004 Condition Used Stock Number 12683 Overall Cutting Length 120" Maximum Cutting Capacity 1/4" Speed 22 SPM Throat 12 Front Operated Power Back Gauges 36" Passline 30" Motor 15 HP.

SCOTCHMAN 9012 Hydraulic Ironworker #7906 #1, SPECIFCIATIONS:, Punch capacity: 90 ton, Throat depth: 12", Flat bar shear: 24" x 1/4", 16" x 1/2", 12" x 3/4", 8" x 1", Angle shear: 6" x 6" x 1/2", Stroke: 45 SPM, Motor: 5 HP, 230V, 3 PH, Machine Dimensions: 77" x 31" x 72", Machine weight: 4,300 LBS, Punching Station ...more

41" x 63" Cutting Chamber, Mechanical Drive, 200HP 3/60/460v Electric Motor, Shock Load Protection, Auto-Reverse, Feed Hopper & Stand Mounted.

Cincinnati Stacker, Capacity: 48" W x 10 Ft Long, -Mounted to back of Shear, -Skate Roll Supports, -Bombay Drop Type, -Side Discharge, -Powered End Stop, -Exit Conveyor, -Installed.

GMC 4′ x 10 Gauge Electro-Mechanical Power Shear, EPS-0410M, Inventory # 9428, Model: EPS-0410M, Cutting Capacity:, Mild Steel: 4′ x 10 Gauge, Stainless Steel: 4′ x 14 Gauge, Blade Length: 52″, Strokes per Minute: 30 SPM, Worktable Height: 32″, Front Support Arm: 36″, Blade Rake ...more

Rogers 10 Ton Power Ironworker, Bantam, Inventory # 8229, Model: Bantam, Made in USA, Punch Capacity: 10 Tons, Angles: 2″ x 2″ x 1/4″, Rounds: 3/4″, Squares: 3/4″, Flats: 1/4″ x 4″, Channels: 2″ x 1/2″ x 1/8″, Punch: 1/2″, Round Hole Thru 1/4″ ...more

1/4" x 6' AMADA MECHANICAL SHEARMODEL M-2060… S/N 2600432… NEW 1983 MAX. CUTTING LENGTH… CAPACITY. 78.74" x.236" THICKNESSBLADE LENGTH. 90.5"GAP DEPTH. 2.56"RAKE ANGLE. 1 DEGREE 28'STROKES PER MINUTE. 60 SPMNUMBER OF HOLDDOWN UNITS. 9 BACKGAUGE - MOVEMENT RANGE.39 ...more

Used 3" Viking rotary gear pump, model LL123, carbon steel construction, nominally rated 140 gpm at 520 rpm rotor speed, mechanical seal on base with 7.5 hp xp motor, serial# 10347766.

Used 0.75 cu ft Baker Perkins double cone vacuum dryer, stainless steel product contact surfaces, approximately 16" diameter x 5" straight side with 10" cones inside dimensions, rated 20 psi and full vacuum internal, jacketed for 20 psi, 6" inlet with cover, 6" outlet with butterfly valve, on stand with 2 hp, 230/460 ...more

Make: Accurl, Model: Mastercut 13.5, Year: 2025, Machine Location: Upon Request, DELEM 360 touch control, AUTO Blade gap & AUTO Rake Angle adjustment, Servo driven 40″ back gauge, 4-Sided blades, Bosch Hydraulics, Siemens Motor/Schneider electrical., The Master-Cut is a 360T CNC Control which levers ...more

, Gauging table on punch end, Electric foot switch on punch end, Mechanical foot switch on notche end, Miscellaneous punches and dies, Manufacturer Piranha PII88 Dual Operator Ironworker Model PII88 Condition Used Serial Number PII88-140 Stock Number 10990 Punch capacity 88 ton Throat depth 9" Open height ...more

New GMC 10' x 10 Ga. Hydraulic Metal Shear - Shearing Machines HS-1010M, - ISO 9001 certified, - Taiwan machines, - HS-1010M comes with 24 manual back gauge, one side handwheel operate ), - adjustment 0.004, inch/mm digital display, - Quick Change Blade Gap Adjustment (BGA), with gap dial, - Shadow line for ...more

SERIAL. S65201, MODEL. IF-10-1/4 II, YEAR NEW. 1991, CAPACITY. 1/4" MILD STEEL, CAPACITY STAINLESS. 3/16", OVERALL LENGTH OF BLADES. 10-2-1/2", RAKE ADJUSTMENT (POWER). 3/8 IPF, FRONT OPERATED POWER BACK GAUGE. 36", FRONT ARM SUPPORTS. 2 @ 24", BACK GAUGE CONTROLLER. MPC 2100, STROKE LENGTH. VARIABLE, STROKES PER ...more

, 36” digital power backgauge, Inch and mm display, Work light, 1 shot lubrication, Variable rake angle, Variable blade clearance, Swing away backgauge, Electric foot pedal, Hydraulic hold down, Manufacturer Betenbender 2' x 3/8 Hydraulic Shear Model 2-375 Condition Used Serial Number 241415R Stock Number ...more

Material Capacity Mild Steel. 1/2" X 20': 1/2" X 20', Length Between The Housing: 20' 3", Throat Depth: 18", Number Of Holdowns: 23, Back Gauge Range: 60", Main Motor: 40 H.P., Strokes Per Minute: 7-28, Approx. Shipping Weight: 77,000 lbs., 60" Power Back Gauge, Electric Foot Switch, Pit Required, NOTE: ...more

¼” X 13’ Hydraulic Shear with Durma ENC100M Digital Control, 39” Motorized Backgauge, Adjustable Blade Gap, Electronic Stroke Adjustment, Foot Pedal for Single Stroke, Cutting Line Illumination and Pneumatic Rear Material Supports., Cutting Length: 160”, Cutting Capacity (Mild Steel): ...more

Geka Hydraulic Ironworker – SEMI PAXY – CNC, Model 110SD w/ Productivity Package, New 2008, Capacities:, Punch Tonnage: 120, 1-1/4″ thru 1″ or 1-1/2″ thru 3/4″, Throat Depth: 24″, Angle Shear: 6″ x 6″ x 1/2″, Plate Shear: 24″ x 5/8″, 16″ x ...more

1/4" X 10' WYSONG POWER SQUARING SHEARMODEL 1025… S/N P37-839… NEW 1983 CAPACITY - MILD STEEL. 1/4" - STAINLESS STEEL. 7 GA.CUTTING LENGTH. 120"RAKE OF UPPER BLADE.″/8"… NO. HOLD-DOWN FEET. 16… T-SLOTS IN BED. 6… MOTOR. 15 HP, 1800 RPM STROKES PER ...more

1/4" x 10' Shear with SP 9 Front Operated Motorized Back Gauge, Squaring Arm, Hold Downs, Blade Gap Adjustment, 1 Position Pre-Selection Control From the Back Gauge with Digital Readout, 7-Segment LED Displays, Pre-Selection of Electro-Hydraulic Cutting Angle Setting with Read-Out, Pre-Selection of Cutting Length ...more