Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

**, Shear Opening: 33", Throat to Tip: 37", Reach: 13'6", Shear Force @ Throat: 1,000 Ton, Shear Force @ Main Blade Center: 422 Ton, Shear Force @ Tip: 164 Ton.

Punching (110 Tons) 1 7/16" diameter through 1" plate Throat Depth 12 inches Bending (Optional) 12" up to 24" w/4-way die block Round Bar Shear 1/2" through 2" Square Bar Shear 1/2" through 1 3/8" Flat Bar Shear 20" x 1/2", 18" x 3/4", 12" x 1" Angle Shear 6" x 6" x 5/8" Coping/Notching 4" x 6" x 3/8" Motor 10 HP ...more

, -60" x 0.135" Capacity, -Model: G18L-60, -Hydraulic Actuated, -Blade Length: 61", -Overall Size: 84" L x 27" W x 83" High.

Very good condition Geka Hyrocrop 110 ton ironworker, with tone of tooling and "C" channel blades as well as rod shear angle shear, flat bar shear, coper/notcher and of course punch station, two foot pedals, Boxes of tooling, Electric Stop and cut length gauge, note tooling on wood table same as tooling in green box ...more

Punching (88 Tons) 1-1/16 diameter through 1 plate Throat Depth 9 inches Bending (Optional) 24, 36, 48 w/4-way die block Round Bar Shear 1/4" through 1-1/2" Square Bar Shear 1/2 through 1 Flat Bar Shear 8 x 3/4, 12 x 5/8, 24 x 1/4 Angle Shear 5 x 5 x 3/8 Coping/Notching 2-3/4 x 4 x 1/4 Motor 10 HP Weight 4700 pounds ...more

SERIAL. 326888T, MODEL. HS414, LENGTH OF BLADES. 52", CAPACITY, MILD STEEL. 14 GAUGE, CUTS PER MINUTE. 40, HYDRAULIC MOTOR. 3 HP, MACHINE PRICED LESS HYDRAULIC MOTOR.

SERIAL. 47153 MODEL. 0806 CAPACITY. 6' X 1/2" MILD STEEL DISTANCE BETWEEN HOUSINGS. 6'4" BLADE THICKNESS. 1-1/8" BLADE RAKE PER FOOT. 3/8" THROAT DEPTH. 18" SPEED. 40 SPM NUMBER OF HOLDDOWNS. 7 TOTAL HOLD DOWN PRESSURE. 11-3/4 TONS BED HEIGHT ABOVE FLOOR. 32" FRONT OPERATED POWER BACK GAUGE. 36" FLUSH FLOOR ...more

ORDER 65, 65 TON PUNCH, 1-1/16" DIAMETER HOLE IN 3/4", 38" X 11" BED, SHEAR, 3/4" X 8" FLAT BAR, 5/8" X 12" FLAT BAR, 1/4" X 24" FLAT BAR, 5" X 5" X 3/8" ANGLE, 1.5" ROUND BAR, 1" SQUARE BAR, COPER / NOTCHER, 2-3/4" X 4" X 1/4", ASSORTED TOOLING (SEE PICTURES), (4 WAY DIE ECT.), RATED AT 60,000 PSI TENSILE STRENGTH ...more

55 Ton Ironworker with Foot Pedal Control, Punching, Notching, Angle Shearing, Flat Bar Shearing, Round & Square Shearing and 2 Simultaneous Work Stations., Flat Bar Shearing: 8” X ¾”, Length of Blade: 12”, Angle Shear at 90°: 4” X 4” X ½”, Angle Shear at ...more

Make: Geka, Model: Hydracrop 165SD, Year: 2026, Machine Location: Upon Request, Two Cylinder Ironworker, SD Version: 610 mm Extended Throat, Punching Power: 185 Ton, Maximum capacity: Ø 40 x 30 mm, Ø 34 × 34 mm, Shearing of Angles at 90°:205 x 205 x 18mm, Shearing of Flat Bars: 750 x 20 mm, 400 ...more

Max. Cutting Length 120" Back Gauge Range 27" Throat 13 1/2" Type Hydraulic Number of Hold Downs (Hydraulic) 13 Strokes Per MInute 21 Horsepower 10 H.P. Dimensions (L x D x H) 145" x 72" x 62" WEIGHT 11,000 Lbs. s Front Operated Power Back Gauge With Indicator Square Arm (2) Front Supports Ball Transfer Table Electric ...more

WYSONG MODEL 1052 LINE SHEAR, MODEL 1052 RKB, CAPACITY: 12 GA., 52" WIDTH, AIR CLUTCH, BOW TIE BLADE, MOTOR: 15 HP 230/460V 3PH.

Stock #: 121250002, Location: Utah, Brand: Accurl, Model: MS8-6x3200, Year: 2022, Approx. Shipping Weight: 20,000 lbs, Approx. Shipping Dimensions:, Loading Fee: Rigging Required, Cutting Capacity: 1/4" MS, Cutting Length: 10', Rake Angle: 0.5°~2.5°, Throat Depth: 5", Working Table Height: ...more

½” X 12’ Hydraulic Shear with CNC Control and Swing-Away Backgauge., Mild Steel Capacity: ½”, Length of Cut: 146”, Front Operated Power Back Gauge: 48”, Rake Angle: ½ IPF, Number of Hold Downs: 15, Hold Down Force: 23.8 Tons, Strokes Per Minute at 12’: 17 ...more

Make: Mansteel, Model: MSH-10250, Year: 1900, Machine Location: Alberta, Canada, – Cutting Capacity: 1/4″ (6.35mm) mild steel, – Cutting Length: 10’6”, – Throat Depth: 5-7/8”, – Rake Angle: 1°30’, – Motor: 15 HP, – Weight: ~16,100 lbs, – ...more

Overview, Type:IronworkersManufacturer:GEKAModel:HYDRACROP 55/AStock #:120669Status:For SaleSerial #:15752Country:United States, Punch Capacity: 1-1/2" x 3/8", Punch Throat Depth: 10", Flat Plate Shear Cutting Capacity: 12" X 5/8", Angle Cutting Capacity: 4-1/2" x 4-1/2" x 3/8", Angles ...more

Make: Cincinnati, Model: 500HS-10, Year: 1990, Machine Location: Illinois, Capacity: 10′ x 1/2″, Cutting Length: 122-3/4″, Maximum Rake: 1/2″ Per Foot, Hold Downs: 13, Hold Down Force: 20.6 Tons, Speed: 19 to 53 Strokes Per Minute, Electrical: 480V/3PH, Approx. Shipping Weight: 25,000 Lbs. ...more

16 GA. - MILD STEEL52"26".

12 GA x 4' PEXTO POWER SQUARING SHEAR, MODEL 12-U-4F S/N 596654 NEW 1959, CAP. MILD STEEL. 12 GA, CAP. STAINLESS STEEL. 14 GA, CUTTING LENGTH. 48", HEIGHT. 48", RAKE PER FOOT.375, BACK GAUGE RANGE. 24", FRONT GAUGE. 36", STROKES PER MINUTE. 62, MOTOR. 1,800 RPM / 5 HP / 220/440 / 3 PHASE, FLOOR SPACE. 79" x 77" ...more

ANGLE SHEAR:, in NON-DEFORM CUT in WITH NO MATERIAL LOSS, ANGLES SQUARE -------------------------- 5 in X 5 in X 1/2 in OR, 6 in X 4 in X 1/2 in, ANGLES ON 45 DEGREE MITRE (LEG IN) ----- 3 in X 3 in X 5/16 in, BAR SHEAR:, ROUND BARS ----------------------------- 1-3/4 in, SQUARE BARS ---------------------------- 1-3/4 ...more

Capacity: 10' x 1/2"Overall Blade Length: 12"Distance Between Housings: 124"Floor to Top of Bed Distance: 35"Number of Hold Downs: 16Motor: 29 HPElectrical: 550V/3ph/60Hz, Front Operated Powered Backgauge w/ Mechanical Readout60" Squaring Arm w/ Support Leg(2) Front Support ArmsFlip Up Blade Safety GateMotorized ...more

” X 10’ Refurbished Shear with SP9 CNC Control, 40” Squaring Arm, Finger Protection Grid, Mobile Foot Control, Sheet Metal Clamps and 40” Motorized Rear Gauge, Working Length: 10’, Capacity of Mild Steel: ”, Min. Cutting Angle: 0.5°, Max. Cutting Angle: 3°, Number of Sheet ...more

Strokes Per Minute (Adjustable) 26 Front Support Arm 24" Voltage 220/440V ~ 3 Phase Weight (Lbs.) 7,500 LBS. S: German Logic Quiet Hydraulic System Adjustable Stroke 60" Long Squaring Arm With Inch/mm Scale Work Light With Shadow Line.

CINCINNATI 1812 SHEAR, Length of knives 12' 4", Blade size 1" X4", Distance between housings 12' 3", Gap 18", Rake angle 1/4", Number of holddowns 13, Holddown to knife edge 5/8", Distance under holddown 1/2", Floor to top of bed 32-1/2", 6" in Floor, Motor 10 HP / 1770 RPM, Volts 230 /3Phase, Approximate ...more

SERIAL. P15-551, MODEL. 1472, CAPACITY MILD STEEL. 14 GA, CAPACITY STAINLESS. 16 GA, BACK GAUGE RANGE. 24", STROKES PER MINUTE. 60, HOLD DOWNS. 12, SQUARING ARM. YES, RAKE. 3/8", FULL LENGTH FOOT TREADLE. YES, MOTOR. 2 HORSEPOWER.

Distance between housings. 8'3" LR, Holddowns. 9, Holddown total pressure (tons). 23, Rake. 1/2 IPF, Four-Edge knife size (L x Face x W). 8' x 4" x 1", Throat. 18", Distance floor to pass line. 34-3/4", Back Gauge Range. 36", Weight. 26.000 lbs., O.A. Dimensions.(lr x fb x high). 7'6" x 10'4" x 9' ...more

-Capacity: 0.105" x 72" (Mild Steel), -Model 1272, -Spring Actuated Holddowns, -Finger Guard, -73" Long Blade, -Straight Raked 4 Edge Blades, -Approx. 60 Strokes/Min., -Passline: 47" (On 14" High Removable Riser), -Cam Operated Brake, -One Shot Lube, -3 HP AC Main Motor, 230/460 V, 3 PH, 60 HZ., -Overall Size: 114" L ...more

12' X 1/4" NIAGARA HYD. POWER SQUARING SHEARMODEL SP-12-1/4… S/N S-65655… YEAR 1990 Max. Thickness. 1/4"Max. Thickness in Stainless.″/16"Length Of Blade. 12'… Back Gauge Range.″6"Number of Holddowns. 12Motor HP. 7.5 OVERALL DIMENSIONS 178" X ...more

SERIAL. 539, MODEL. PII-88, PUNCHNG CAPACITY, TONNAGE. 88 TON, ANGLE SHEAR CAPACITY. 5" X 5" X 3/8", THROAT DEPTH. 10", ANGLE SHEAR. 5" X 5" X 3/8", ROUND BAR SHEAR (MIN. TO MAX.). 1-1/2", SQUARE BAR SHEAR (MIN. TO MAX.). 1" X 1", PLATE SHEAR, BLADE LENGTH. 24", PLATE SHEAR (MIN. TO MAX.). 3/4" X 8" TO 1/4" X 24" ...more

Make: Accurshear, Model: 625012, Year: 2021, Machine Location: Upon Request, Capacity: 1/4″, Cutting Length: 12′, Blade Dimensions: 1″ x 3″ x 148″, Hold Downs: 19, Cycles Per Minute: 20-46, Motor: 20 HP, Back Gauge Range: 0-36″, Machine Weight: 21,000 LBS, Accurshear Control ...more

SERIAL. 46890, MODEL. 2500 X 12 FSU II, CAPACITY. 1/4", LENGTH OF CUT. 144", Back Gauge. 48” @ 120 IPM, Number of Hold Downs. 15 Under Hold Downs. ½” SPEED. 32 TO 70 SPM MOTOR. 25 HP, Programmable Control (Programs: Cut Length, Rake Angle, Blade Gap and 0 - 48” ...more

1/2" X 13', 42" CNC Powered Back Gauge, 10' Squaring Arm, Sheet Supports, Foot Pedal, Spare Blades and Roller Bearing Table, Number Of Hold Downs: 25, Bore Of Hold Downs: 3", Maximum Cutting Width: 13' 6", Motor: 30 HP 460/230/60/3, Approx. Weight: 40,000 LBS, Approx Dimensions: 14' 6" LR X 72" FB X ...more

SERIAL. 5411, MODEL. MK-20, PUNCH CAPACITY:. 1-3/16" THRU 3/4", PUNCHING CAPACITY. 1" THRU 7/8", DEPTH OF THROAT. 20", SHEAR CAPACITY PLATE. 3/4", SHEAR CAPACITY FLATS. 6" X 3/4", SHEAR CAPACITY ROUNDS. 2-1/8", SHEAR CAPACITY SQUARES. 2", 90 DEGREE ANGLES. 6" X 6" X 1/2", 45 DEGREE ANGLES. 4" X 4" X 1/2", NOTCHER. 3" ...more

CAPACITY (TENSILE STRENGTH 55,000 lbs. @ RATED CAPACITY), (MILD STEEL) --------------- 10 GAUGE 3.4MM, (STAINLESS STEEL) ---------- 14 GAUGE 2MM, STROKES PER MINUTE ------------------ 40, CUTTING LENGTH ---------------------- 49 in, SHIPPING WEIGHT --------------------- 3,600 LBS, FLOOR SPACE W/GAUGES ---------------- ...more

SERIAL. 856A0.901541056, MODEL. 6A, PUNCHING CAPACITY. 105 TONS, PUNCHING SIZE. 1-1/4" THROUGH 1" THICK, DEPTH OF THROAT. 24", ANGLE SHEARING. 6" X 6" X 1/2", ANGLE SHEARING, 45 DEGREE. 5" X 5" X 1/2", PLATE. 1/2" X 21";3/4" X 10-1/2";1" X 8", ROUNDS. 2-1/4", SQUARES. 2", COPING CAPACITY, SQUARE. 2-1/2" X 3-1/2" X ...more

Pearson 10'/.25MS Hydraulic Power Squaring Shear 10' x 1/4" #6934 #2, Capacity, Mild Steel: 1/4", Length of Knives: 122", Rake Angle, Taper Per Foot: 5/16", Number of Hold Downs: 11, Floor to Table Top: 32", Strokes per Minute: 18 to 50, Motor: 10 HP / 1150 RPM, Volts: 230 / 460, Phase: 3, Cycles: 60, Amps: 25 ...more

Weight8000 pounds, SERIAL. 3474 NEW. 08/1999 MODEL. 61356 CAPACITY. 10 GAUGE MS LENGTH OF CUT. 6’, BACK BAUBE. MOTORIZED, BACK GAUGE CONTROL. PROGRAMMABLE DIGITAL, STROKE CONTROL. VARIABLE KNIVES. 1" X 3" X 76" HOLD DOWNS. 10, HOLD DOWN TONNAGE. 10 TONS, SPEED, FULL STROKE. 34 SPM, SPEED, SHORT STROKE. ...more

1/4" x 10' Shear with SP 9 Front Operated Motorized Back Gauge, Squaring Arm, Hold Downs, Blade Gap Adjustment, 1 Position Pre-Selection Control From the Back Gauge with Digital Readout, 7-Segment LED Displays, Pre-Selection of Electro-Hydraulic Cutting Angle Setting with Read-Out, Pre-Selection of Cutting Length ...more

Denro Crop Shear, -Capacity: 0.187" x 78" wide, -Max. Shear Blade Length: 82.5", -Hydraulic Cylinder Actuated, 4.5" Bore x 10" Stroke cylinders, -Spring Loaded Holddown, -17" from Floor to Top of Bottom Blade, -No Valves or Controls, -Less Shear Blades, -In storage: Toledo, OH..

Pre Owned 2014 Atlantic Model HDE 101/4 Hydraulic Power Squaring Shear, Capacity (Mild Steel) 1/4” X 122”, Angle Adjustment 1-3”, Strokes Per Minute 10 – 25, Number of Holddowns 18, Back Gauge Range 39”, Main Motor Horsepower 15, Stroke Length Control, Electric Foot Switch, Rear Parts ...more

Voltage 440v, 3 Phase Maximum Cutting Length 120" Number of Hold Downs (Hydraulic) 13 Throat 14" WEIGHT 11,000 Lbs. Dimension (L x D x H) 140" X 60" X 96" s Foot Pedal Front Operated Power Back Gauge W/Indicator Supports Squaring Arm Hydraulic Hold Downs.

Capacity3/4" to 1.75" Cutting Force130 Tons Shear Length12" to 36" Maximum Bar Length43" (3-15" Bar Feeds) Hydraulic Unit Motor100 Horsepower Auto CycleYes.

SERIAL.431-303, MODEL. NH5216, YEAR NEW. 2003, CAPACIITY. 16 GAUGE, CAPACITY STAINLESS. 20 GAUGE, LENGTH OF BLADES. 52", STROKE PER MINUTE. 25, SQUARING ARM. YES, FRONT ARM SUPPORTS. 2, BACK GAUGE. 26", FOOT PEDAL. YES, MOTOR HORSEPOWER. 3, HARDLEY USED. LIKE NEW.

Make: Cincinnati, Model: 1812, Year: 1900, Machine Location: Ohio, Cutting Capacity: 12′ x 1/4″ mild steel, Length Between Housings: 12′ 3″, Blade Length: 12′ 4″ to 12′ 6″, Overall Dimensions: Approximately 15′ 2″ x6′ x6′ 3″, Strokes Per ...more

Capacity (Mild Steel): 3/4", Cutting Length: 14', Strokes Per Minute (Full Stroke): 14, Strokes Per Minute (Short Stroke): 34, Back Gauge Range: 48", Number of Hold Downs: 22, Main Motor: 60 H.P., Approximate Dimensions: 301" x 110" x 106", Approximate Shipping Weight: 65,000 Lbs., Shear Control with LED Display ...more

Punching capacity 66 Tons 7/8'' in 3/4'' -- 2'' in 5/16'' Depth of Throat 12'' Angle Shear 5'' x 5'' x 1/2'' - 3'' x 3'' x 3/8'' Miter Plate Shear 14'' x 9/16'' or 10'' x 3/4'' Notcher 2'' x 3-1/2'' x 3/8'' HP 7.5 Power 3 Ph / 60 Hz / 240 V Machine Size S Model 67'' x 32'' x 68'', SUNRISE Model IW Dual Cylinder ...more

Used Met-Fab 3/8 X 10 Shear Conveyor with pneumatic supports. s 6 belts, portable foot pedal, extra belts, and a new motor. Operates on 220/440V 3-phase power. Efficient material handling with pneumatic support arms., Brand: Met-Fab, Model: 3/8x10, 6 belts, 220 / 440 volt 3 phase, Pneumatic sheet support system ...more