1 - 50 of 190 listings
Featured
28" Yoder Slitter, pull thru, 16" recoiler, 20" uncoiler
Holmes Manufacturing | Killbuck, OH
Category: Slitting Lines
Seller: Holmes Manufacturing
Location: Killbuck, OH
Mfr: Yoder
Yoder 28" Slitting line. 208 Volts 3 phase., Comes with extra shafts and knifes. Will slit up to 28" coil., It is a pull through. The uncoiler is not power driven. The uncoiler is powered by a hydralic unit in case your coil has oscillation with sensors on the slitter. OD on recoiler is 16" and OD on uncoiler is 20". ...more
Featured
62" x .135" B & K, 50000 lb., 20" & 24" ID at recoiler
American Steel Products Co | Toledo, OH
Category: Slitting Lines
Seller: American Steel Products Co
Location: Toledo, OH
Mfr: B & K
8" x .062" Stanat Design slitting line w/banding line, 2000 lb., mandrel uncoiler, slitting head
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Stanat
Brand STANAT, Stock #102068A, Condition Used, Width 8 inches, Thickness.062 inches, Capacity 2000 pounds, Gauge Range: 0.001" -.062", Complete Line with The Following:, Mandrel Uncoiler, Slitting Head, Entry Guide Parallel Adjustment of Top Arbor, Arbor Diameter: 2.625", Knife Diameter: 7", Spacer Diameter: 4.5" ...more
9" x 2.5" National Standard, pull thru line, dual recoilers, L to R
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: National
National Standard Slitting Line, Pull Thru Slitting Line with Dual Takeups, -Capacity:, Material Width: 9", Thickness Range: 0.020" (0.508mm) - 0.062" (1.57mm), Number of Cuts: 9 Cuts 0.020" (0.508mm) approx., 6 Cuts 0.062" (1.57mm) approx., Line Direction: Left to Right, Consisting of:, -Uncoiler:, Type: Non-Driven ...more
10" x 2-5/8" National Standard slitting line, finger set up, #12674
Machinery International Corp | Woodridge, CT
Category: Slitting Lines
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: National
MACHINE# 12674, MANUFACTURER: NATIONAL STANDARD, TYPE SLITTER: PULL THRU FINGER SET UP, ARBOR SIZE: 10" (254mm) x 2 1/2" (63.5mm), CAPACITY:, THICKNESS RANGE: 0.005" (.127mm) - 0.062" (1.6mm), NUMBER OF CUTS: 9 CUTS 0.005" (.127mm) - 6 CUTS.062" (1.6mm), DRIVE MOTOR: 15 HP REEVES, 44/22 AMPS ...more
10" x 4" Ruesch, Ring Slitter, 11" face width, entry guides
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
ITH BLADES, -MANUFACTURER: RUESCH, -TYPE: RING SLITTER, -SIZE: 10" (254mm) WIDE, -ARBOR, -DIAMETER: 4" (101.6mm), -FACE WIDTH: 11" (279.4mm), -DRIVE MOTOR: ELECTRIC GEARMOTOR, 7 1/2" HP (5.6Kw) 1760 RPM, 220/440 VOLT 3 PHASE 60 HERTZ, 20.6/10.3 AMPS, 58.62/1 RATIO, NOTE: SLITTER IS ENTRY GUIDES., -WINDER, -TYPE: ...more
12" x .008" -.125" General Electric Littell-Bliss, slitting line, 4000 lbs, 16HP recoiler, transformer, parts & cart
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: General Electric
INCOMING COIL (MILD STEEL): 008" -.125" THICKNESS 750" -12.00" WIDTH 16" -24" ID / 72" MAX OD 4,000 LB. MAX COIL WT. FINISHED PRODUCT : 008" -.125" THICKNESS 125 GA-MAX 4 CUTS/.500"-12.00" WIDTH 030-.060 GA-6-8 CUTS/.500"-12.00" WIDTH 16" OR 20" ID / 72" MAX OD 4,000 LB. MAX WEIGHT ON RECOILER MANDREL LINE INCLUDES: ...more
Get email updates for newly added Slitting Lines
Slitting Lines (also known as slitting systems) are production lines used to cut wide coils of material, such as metal or plastic, into narrower strips with precision. These lines typically include decoilers, slitters, and recoilers to streamline the process. Commonly used in industries like metal fabrication, automotive, and manufacturing, they are ideal for high-volume operations requiring consistent strip dimensions. Slitting lines are essential for efficient, large-scale material processing.
12" x .032" B+S, Precision Traverse Winding Slitting Line, LR, 656 FPM, 480 V., 2022
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Year: 2022
, Manufacturer: B+S, Material Thickness: 0.005” – 0.032”, Coil Width (Master): 3” – 12”, Slit Strip Width: 0.375” – 0.750”, Tensile Strength: 40,000 – 70,000 KSI, Elongation (Max): 20%, Line Direction: Left To Right, Line Speed (Max): 656 FPM, Jog Speed ...more
12" x .125" Bliss slitting line, 4000 lb., knives & tooling, complete
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Bliss
Make: Bliss, Material Width:.075" - 13", Material Thickness:.008" -.125", Weight Capacity: 4,000Lb, Coil ID: 16" - 20", Coil OD: 72", Direction: Right to Left, Mandrel Uncoiler, Make: Littell, Mandrel Width: 18", Manual Expansion, Drag Type Brake, Slitting Head, Arbor Diameter: 3", Manual Arbor Adjustment, Sliding ...more
12" x .125" Bliss, slitting line, 4000 lbs., R to L
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
, MAKE: BLISS, MATERIAL WIDTH:.075" - 12", MATERIAL THICKNESS:.008" -.125", WEIGHT CAPACITY: 4,000LB, COIL ID: 16" - 20", COIL OD: 72", DIRECTION: RIGHT TO LEFT, MANDREL UNCOILER, MAKE: LITTELL, MANDREL WIDTH: 18", MANUAL EXPANSION, DRAG TYPE BRAKE, SLITTING HEAD, ARBOR DIAMETER: 3", POWERED ARBOR ADJUSTMENT, SLIDING ...more
12" x .157" Nobs Slitting Line, 500 kg, uncoiler, recoiler, auxiliary recoiler
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
AGE: 1969, Previously used for Stainless Steel, CAP. -.157" (4mm) THICK, 12" WIDTH, ARBOR DIA. - 2-1/2" DIA. x 12" L, UNCOILER - 13-3/4" FACE x 14" DIA. (COLLAPED) 17" EXPANDED, RECOILER - 19" FACE x 15" DIA (MANUAL EXPANSION), AUX. RECOILER - 19" FACE x 9" DIA, DRIVE: 500 V 50 HZ AC, HYD. MOTOR - V.S MOTOR DRIVE ...more
12" x 2.5" Ruesch #76, slitting line, 1000 lb., scrap winder, dual recoilers
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Model: 76
-Ruesch Model Number: 76 (N1966), -Type Slitter: Pull Through, Finger Set-Up, -Line Direction: Right to Left, Material:, Type: Beryllium Copper, High Carbon and Stainless Steel, Width: 2" to 12" (50mm - 305mm), Thickness: Per Original : 0.001" - 0.020" (0.025mm - 0.508mm), As Used: 0.003" - 0.025" (0.076mm - 0.625mm) ...more
12" x 2.5" Stanat #S-180-12, Slitting Line
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stanat
Model: S-180-12
Stanat Slitting Line, Model S-180-12, Capacity: 12" Wide x 4,200 lbs., Consisting Of:, -Less Uncoiler:, -Slitter: Stanat, 2.50" Dia. x 13" Face Arbors, Parallel Arbor Adjustment, Entry Passline Roll, Entry Side Guides, Manual Adjustment, Exit Driven Pinch Rolls, Built-In Scrap Winder, Oscillate Wind, 2 HP AC Motor ...more
12" x 2-5/8" Ruesch #76, dual arm take up common base, #12673
Machinery International Corp | Woodridge, CT
Category: Slitting Lines
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Ruesch
Model: 76
MACHINE# 12673, MANUFACTURER: RUESCH MACHINE CO, SERIAL NUMBER: N1966 5309, TYPE SLITTER: PULL THRU FINGER SET UP, ARBOR SIZE: 14" (355mm) x 2 5/8" (6.67mm) DIAMETER, THICKNESS CAPACITY:, AS PER MANUFACTURER'S :, 0.050" (1.27mm) MAXIMUM MILD STEEL, AS USED:, 0.025" (0.635mm) MAXIMUM THICKNESS ...more
12" x 4" N Ferrara #2187/4SH-75-5TR-V-R29-0107, 4" hi precision slit.line w/traverse winder
N Ferrara Inc | Somerset, MA
Category: Slitting Lines
Seller: N Ferrara Inc
Location: Somerset, MA
Mfr: N Ferrara
Model: 2187/4SH-75-5TR-
-Material: Gold, Silver, Steel, Brass, Wire Mesh, Copper, -Traverse Winder: 203,000' Cap. Max., -Starting Width: 3'' Maximum, -Thickness Range:.012"Wide min 0.002''/0.020'', -Weight Capacity: 90 lbs Maximum per coiler, -Speed Range: 0-500 F.P.M., -Volts: 220, -PH: 3, -CY: 60, Uncoiler ...more
12" x 5.625" Stanat, slitting line, 7500 lb., hydraulic expansion, entry pinch rolls
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stanat
-12" Wide Slitter, -Variable Speed Drive, -7,500 lb. Coil Weight Capacity, -Slits as narrow as 0.375" Wide x 0.105" Thick Mults, Consisting of:, -Uncoiler:, Manual Expansion, 16" - 20" I.D., -Slitter Head:, 5.625" Dia. Arbors, Steel Stripper Ring Assembly, Entry Driven Pinch Rolls, 30 HP Drive Motor, -Scrap Winder: ...more
12" AKV, loop slitting line with packaging line, entry coil car, electric lift, slitting head
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Akv
ENTRY COIL CAR, Electric Lift, UNCOILER, Mandrel Type, Mfg. AKV, Coil Weight Max.5 Ton, Coil OD Max.1300mm, Mandrel ID Range.500mm to 620mm, Mandrel face.320mm, DC Motor Drive.__Kw, 380, 50 cy, Hydraulic Expansion, Traverse, STRIP LOOP CONTROL STAND, SLITTING HEAD, Mfg. AKV, Entry Deflector Roll and Side Guide, Shaft ...more
12" Amermac #1100, Stripper Ring Lathe, 12" width x 5.5"/6.5"/7.5"/8.5"/9.5" diameter Mandrels, 1/3 HP, 110 V
Met-Pro Machinery Inc | Detroit, MI
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Amermac
Model: 1100
, MFG: AMERMAC, Model: 1100, S/N: 155, Model 1100 Stripper Ring Lathe, 12" wide Mandrels, 5.5", 6.5", 7.5", 8.5", 9.5" diameter Mandrels, GE drive motor, 1/3 HP, 110V., 1PH, 60hz, 1725 RPM, 15.3 Amps, With thirty years experience in the manufacture and marketing of tire, truing equipment ...more
12" Loopco #12-4SL, 8000 lb. W/ 16" ID
AMM Industries, LLC | Sylvania, OH
Category: Slitting Lines
Seller: AMM Industries, LLC
Location: Sylvania, OH
Mfr: Loopco
Model: 12-4-SL
Year: 1985
Uncoiler, Peeler Table, Swinger Ring Type Slitter Head, Entry Crop Shear, Entry Pinch Roll & Edge Guide, 4" Dia Arbor, Asko Tooling, 50 HP DC Motor, Pit Cascade Rolls, Scrap Winder, Hydraulic Oscillation, 5 HP Motor, Pit Table, Tension Stand, Pit Cascade Rolls, Drag Wipe Design, Recoiler, Hydraulic Grip & ...more
12" Torrington, slitter
Universal Tube & Rollform | Perrysburg, OH
Category: Slitting Lines
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Torrington
UTUBE NUMBER: 1359, MANUFACTURER: TORRINGTON COMPANY, SERIAL NUMBER: 41609, Maximum Strip Width: 12″, Arbor Diameter: To Be Determined, Recoiler Arbor 12″ (Built on Slitter), Motor, OVERALL DIMENSIONS: 5′ x 5′ x 5′, APPROXIMATE WEIGHT: 4,000 Lbs., LOCATION: Universal Warehouse ...more
13.78" Frohling, 350mm precision ring slitting line, double loop, operator Control consoles, tooling
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Frohling
WIDTH RANGE -.10MM - 350MM, THICKNESS CAPACITY.0.04MM - 0.60MM, SPEED:. ____________, ENTRY, COIL ID ENTRY. 200MM / 300MM / 400MM, COIL ID EXIT.200MM / 300MM / 400MM, COIL WEIGHT ENTRY.5 TON, COIL WEIGHT EXIT.2.5 TON / 3 TON / 5 TON, LINE EQUIPMENT, PAPER WINDER, UNCOILER, HYDRAULIC EXPANSION, PIT, ENTRY GUIDE RAMP ...more
14" x .06" Ruesch slitting line, 6000 lb.
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Ruesch
Ruesch Precision Slitting Line, Model 149 Integral Slitter - Recoiler Assembly, SERIAL #: 5867, Capacity: 14" x 0.005" - 0.060", Line Direction: Right to Left, Consisting of:, -Uncoiler: Rowe, Capacity: 7,500 lbs, Model: 7520-DS/L, Manual Expansion: 17" - 20", 27.5" Face Mandrel, (4) Segment Mandrel, Link Type ...more
14" x .125" Loopco, complete, looping, 8000 lb., 1200 FPM, Shimless Tooling
CJE Machine | Cumming, GA
Category: Slitting Lines
Seller: CJE Machine
Location: Cumming, GA
Mfr: Loopco
Year: 1985
14" x 2.875" Ruesch #149-Integral, slitting line, 6000 lb., 60" OD, 20"-24" ID, 4-kepers, Wichita clutch, reconditioned 2021
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Model: 149-INTEGRAL
Ruesch Precision Slitting Line, Model 149 Integral Slitter - Recoiler Assembly, Completely Reconditioned in 2021, Capacity: 14" x 0.005" - 0.060", Line Direction: Right to Left, Consisting of:, -Uncoiler: Rowe, Model 16040-DS/L, Capacity: 16,000# x 40", 20" - 24" Coil I.D. Range, Powered Expansion, 1.5 HP AC Motor, 4 ...more
14" x 4.25" Ruesch #146, Precision Slitting Line w/Tooling
International Rolling Mills | Pawtucket, RI
Category: Slitting Lines
Seller: International Rolling Mills
Location: Pawtucket, RI
Mfr: Ruesch
Model: 146
Ruesch Model 146 Precision Slitting Line, ideal for medium-gauge materials. Used condition with tooling included. s a max width of 14 inches, ensuring efficient and precise slitting for your production needs., RUESCH 146, Max Width. 14".
15.75" AKV, plug-in pull thru slitting line, uncoiler, slitting head, scrap winder, recoiler
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Akv
UNCOILER, Mandrel Type, Mfg. AKV, Coil Weight Max.5 Ton, Coil OD Max.1300mm, Mandrel ID Range.500mm to 620mm, Mandrel face.400mm, Hand Expansion, Coil Keeper Arms, Snubber roll Arm (missing cylinder), SLITTING HEAD, Mfg. AKV, Entry Deflector Roll (tension?) and Strip Guide, Shaft Diameter.100mm, (2) Drive Motors,. ...more
17-1/2" x 2-1/2" KZ Slitting Line, 2200 lb., 17 cuts, 240 MPM, 500mm housing distance, 170mm slitting knife
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Previously used for Stainless Steel, Strip Width: 8-320mm, Thickness: 0.20 -3.0mm, Number of Cuts: 17, Cutting Speed: 240M/Min, Max. Distance between Housing: 500mm, Arbor Diam.x Width: 80mm x 380mm, Slitting Knife Diam.: 170mm, With:, Decoiler, Mandrel Diam.: 450mm, Mandrel Width: 500mm, Coil Weight: 1000KG ...more
18" x .003" -.025" Ruesch #194, ring type precision double loop slitting line, 8000 lb., 2.875" arbor
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Ruesch
Model: 194
Width 18 inches, Thickness.025 inches, Coil Weight 8000 pounds, Arbor Size 2.875 inches, Model: N2799, S/N: 6109, Min. Width:.210, Max. Width: 18, Thickness Capacity:.003.025", Speed: 1000 Ft./Min., Min. Slit Width:.500, Max. Slit Width: 17.750, Includes:, Ruesch Uncoiler, Model: N2799B, 8000# Capacity, Min. Dia.: 16 ...more
18" x 2.625" Ruesch, ring type slitting line, Ruesch 6000 lb., 2.625" thickness, 72" entry coil OD, 16" entry coil ID
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Ruesch
Max Coil Weight Capacity: 6000#, Entry Coil ID: 16", Entry Coil OD: 72", Exit Coil ID: 6", 8", 12", and 16", Exit Coil OD: 60", Maximum Width: 18", Complete Line with the Following Components:, Paper Unwinder, Ruesch Uncoiler, Entry Edge Guides, Deburring Roll, Ruesch Slitter Head ...more
18" x 2.625" Ruesch, Ring Type Slitting Line, 6000 lb., 16" /68" ID/OD entry coil, slitting head, scrap winder, recoiler
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
Specifiations:, Max Coil Weight Capacity: 6000#, Entry Coil ID: 16", Entry Coil OD: 72", Exit Coil ID: 6", 8", 12", and 16", Exit Coil OD: 60", Maximum Width: 18", Complete Line with the Following Components:, Paper Unwinder, Ruesch Uncoiler, 32" Mandrel Face, Four Leaf Hydraulic Expansion, Disc Brake, Feed Up Drive ...more
18" x 2.625" Ruesch, Ring Type Slitting Line, 6000 lb., 16" /68" ID/OD entry coil, slitting head, scrap winder, recoiler
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
Specifiations:, Max Weight Capacity: 6000#, Entry Coil ID: 10"-16", Entry Coil OD: 68", Exit Coil ID: 4", 12", and 16", Exit Coil OD: 60", Maximum Width: 18", Complete Line with the Following Components:, Paper Unwinder, ASL Uncoiler, 25" Mandrel Face, Model 1000, S/N: 7970 3737, Hydraulic Expansion, Powered Hold Down ...more
18" x 2-7/8" Ruesch #146, Double Loop Precision Ring Type Slitting Line, 1000 FPM, R-L, 1979
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
Model: 146
Year: 1979
Manufacturer - Ruesch, Type - Precision Double Loop Slitting Line, Model: N2799, S/N: 6109, Width Range -.210" - 18", Thickness Capacity:.003" -.025", Speed: 1000 Ft./Min., Min. Slit Width:.500", Max. Slit Width: 17.750", Includes:, Ruesch Uncoiler, Model: N2799B, 8000# Capacity, Min. Dia.: 16" 20" 24", Hydraulic ...more
18" x 2.875" Ruesch, 3000 lb., 25 HP, steel stripper rings
Met-Pro Machinery Inc | Detroit, MI
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
18" x 2.875" Ruesch, slitting line, 6000 lb., 250 FPM, hydraulic expansion, 3 segment mandrel, 12"-16" ID w/ pads
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Diameter of Arbors: 2.875", Maximum Coil Width: 18", Maximum Coil Weight (Uncoiler): 6,000 lbs., Maximum Coil Weight (Recoiler): 6,000 lbs., Thickness Capacity (Mild Steel): 0.005" - 0.060", Cutting Capacity (Mild Steel): 16 Cuts in 0.010", 6 Cuts in 0.040", Line Speed: 0 - 250 FPM, Line Direction: Right to Left ...more
18" x 2.875" Ruesch, slitting line, 4000 lb, 60" outside dimension, 16"-20" ID
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
18" Ruesch Slitting Line, -Line Direction: Left to Right, -Main Motor: 30 HP DC, -DC Drive: Variable Speed, Consisting of the following:, -Littell Uncoiler:, Model: 40-12, Coil Width: 12", Coil Weight: 4,000 lbs., Coil I.D.: 16" - 20", Manual Expansion, Coil O.D.: 60", AC Drive Motor thru Right Angle Reducer, -Slitter ...more
18" x 2.9" Ruesch, Slitting Line, 6000 lb. capacity, 28" face Uncoiler, 36" Deck Lift Cart, 16" ID Recoiler
Met-Pro Machinery Inc | Detroit, MI
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
, MFG: RUESCH, Uncoiler, Model: N3022B S/N: 6195, 6,000# capacity, 28" face, Slide Base, Hydraulic Expansion, 12" dia. to 16" ID with pads, Lift Cart: 36" Deck, Guild Butt end Welder, Roll type Crop Shear, Edge Guides: 22: Max. Opening, Slitter heads(Two), Model: N3022E S/N: 6195 model 149 heads ...more
18" x 3" Production Machinery, Slitting Line, 9000 lb., .012" - .088" Gauge Range, 60" outside dimension, 16" ID, 24" width mandrel Uncoiler, 25" Face x 16" diameter Recoiler, L-R
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Production Machinery
Model: 18 X .088 PRODUCTION MACHINERY SLITTING LINE (US
, Manufacturer: P.M., Width Capacity: 18", Weight Capacity: 9,000Lbs Entry; 6,000 Lbs Exit, Gauge Range:.012" -.088", Max ID: 16", Max OD: 60", Line Direction: Left to Right, Line Includes:, Uncoiler, -24" Wide Mandrel, -9,000 Lbs Weight Capacity, -15 HP Feed-Up Motor, Slitter Head, -20" x 3" Diameter, -20 HP Motor ...more
18" x 3" Ruesch #N2818 slitting line, 3" arbors, 5000 Lbs., Excellent Condition
Johnston Machinery Corp | Des Plaines, IL
Category: Slitting Lines
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Ruesch
Model: N2818
18" x 3" Stanat #S-180, mandrel type uncoiler, 4500 lbs. capacity, 15 HP
Yoder Brothers Machinery | Toledo, OH
Category: Slitting Lines
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Stanat
Model: S-180
SERIAL. 58858, MODEL. S-180, WIDTH CAPACITY. 18", ARBOR DIAMETER. 3", CONSISTING OF:, MANDREL TYPE UNCOILER, CAPACITY. 4500 LBS, BAND TYPE DRAG BRAKE. YES, SLITTER HEAD, WIDTH CAPACITY. 18", ARBOR DIAMETER. 3", ENTRY PASS LINE ROLLS. YES, SINGLE POINT ADJUSTMENT. YES, VARIABLE SPEED MOTOR. 15HP, FINGER BOARD ...more
18" x 3" Yoder #M2, Pull Through Slitting Line, w/Uncoiler, Slitter & Recoiler, 2500 lb. Uncoiler & Recoiler capacity, 6" outside dimension Knives, 150 FPM
Yoder Brothers Machinery | Toledo, OH
Category: Slitting Lines
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Yoder
Model: M2
AMERICAN ASC UNCOILER COIL REEL, SERIAL. 2550, CAPACITY. 2,500 LBS, MANDREL WIDTH. 22", ID EXPANSION. MANUAL, NON MOTORIZED. YES, YODER SLITTING HEAD, MODEL. M2, WIDTH. 18", ARBOR. 3", KNIVES. 6" OD, CAPACITY. 8 CUTS OF.078"; 19 CUTS OF.031", CAPACITY. 14 CUTS OF.044"; 12 CUTS OF.062", SPEED. 150 FPM, RECOILER COIL ...more
18" x 3-1/2" Wallner #SL-18, precision package slitting line, #70207
Yoder Machinery Sales | Holland, OH
Category: Slitting Lines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wallner
Model: SL-18
MODEL. SL-18-083, MAX WIDTH. 18", COIL WEIGHT. 2000 LBS, CONSISTING OF:, *** WALLNER UNCOILER, SERIAL. 2343, MODEL. RE-18-12, CAPACITY. 2000 LBS, NOMINAL WIDTH. 18", I.D. 10" TO 14", MANUAL EXPANSION. YES, DRAG BRAKE. YES, *** WALLNER SLITTER HEAD, SERIAL. 4360, ARBOR. 18" X 3-1/2", ENCODER DANCER ARM. YES, *** ...more
18" x 5-1/2" Pro-Eco, Slitting Line, 20000 lb., 20"-24" expansion range, hydraulic expansion, 20" face mandrel, Stock # 0519221
G-2000 | Toledo, OH
Category: Slitting Lines
Seller: G-2000
Location: Toledo, OH
Mfr: Pro-Eco
-UNCOILER:, 20" - 24" EXPANSION RANGE, HYDRAULIC EXPANSION, 20" FACE MANDREL, 4 SEGMENT MANDREL, HOLDOWN ARM, AIR OPERATED DISC BRAKE, -SLITTER HEAD:, 5.5" DIA. X 21.5" FACE ARBORS, 6.5" DIA ENTRY PINCH ROLLS, ENTRY SIDE GUIDES, 40 HP AC MOTOR, 1770 RPM, 440 VOLT, GEAR REDUCER W/ 11.4:1 RATIO, 65" PASSLINE HEIGHT ...more
20" x 3-3/4" Paxson, slitting line, 10000 lb.
Universal Tube & Rollform | Perrysburg, OH
Category: Slitting Lines
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Paxson
UTUBE NUMBER: 2030, MANUFACTURER: PAXSON, MODEL NUMBER:, SERIAL NUMBER: 200, YEAR:, PAXSON Slitter Head:, Serial Number: 200, Maximum Strip Width: 20″ (508 mm), Arbor Diameter: 3-3/4″ (95.2 mm), Push Button Console, PAXSON Recoiler:, Maximum Strip Width: 20″ (508 mm), Push – Off Arm, Overhead ...more
20" Wean slitting line with packaging line
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wean
21.5" x 5.5" . Pro-Eco Slitter Head. Stock # 0421423
G-2000 | Toledo, OH
Category: Slitting Lines
Seller: G-2000
Location: Toledo, OH
Mfr: Pro-Eco
Model: 0421423
ARBOR DIAMETER.: 5.5", LENGTH OF ARBOR.: 21.5", ENTRY PINCH ROLL DIAMETER.: 6.5", ENTRY SIDE GUIDES.: YES, 40 HP AC MOTOR, 1170 RPM, 440 VOLT, GEAR REDUCER W/11.4.1 RATIO, 65" PASSLINE HEIGHT, Machine Type.Slitters & Slitting Lines Manufacturer.PRO-ECO Model.N/A Year.N/A Condition.Used.
22" x 4" Tacke Olalde, slitting line, 10000 lb., 20" recoiler, 24" 72" OD, 16"-24" ID, air brake, manual expansion
Universal Tube & Rollform | Perrysburg, OH
Category: Slitting Lines
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Tacke Olalde
UTUBE NUMBER: 2520, MANUFACTURER: TACKE OLALDE, MODEL NUMBER:, SERIAL NUMBER:, YEAR:, Materials: Mild Steel, Shear Strength: 50,000 PSI (22,679 kgs.), Maximum Coil Weight: 10,000 Lbs. (4,535 kgs.), Coil I.D.:, Entry: 16″ – 24″ (406 – 609 mm), Recoiler: 20″ (508 mm), Line Direction: Right ...more
24" x .08" Guida Impianti, Slitting Line w/(2) Packaging L, 15 Ton, PLC, 1985, upgraded 2010
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Year: 1985
YEAR OF MFG:1984-1985, ELECTRICAL UPGRADE ELLETRE MOTOR DRIVES SIEMENS S7 PLC, 2008-2010, SLIT MATERIAL:CARBON STEEL SAE1006, S235-S550, C45-C75, IF, COIL WEIGHT 11 TON, STRIP WIDTH MAX.: 600 MM, STRIP WIDTH MIN.: 15 MM, SLITTING HEADS (2)MOTOR DRIVEN, INJECTOR, SLITTING HEAD SHAFT120MM DIAMETER, THICKNESS:MIN 0.5 MM ...more
24" x .09" Ruesch slitting line, 5000 lb., uncoiler, 31" mandrel face, hydraulic expansion, sliding base
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
, Max Coil Weight: 5000#, Max Coil Thickness:.090", Entry Coil ID: 16"-20", Entry Max Coil OD: 50", Exit Coil ID: 16", Exit Max Coil OD: 60", Complete with the Following Components:, Uncoiler, 31" Mandrel Face, Bolted Leaves for Larger ID, Hydraulic Expansion, Sliding Base, Feed Up Drive, Wichita Water Cooled Brake ...more
24" x .09" Ruesch slitting line, 5000 lb.,4" arbor, uncoiler, pass line roll, edge guides & tension stand
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Ruesch
, Max Coil Weight: 5000#, Max Coil Thickness:.090, Entry Coil ID: 16-20, Entry Max Coil OD: 50, Exit Coil ID: 16, Exit Max Coil OD: 60, Complete with the Following Components:, Uncoiler, Pass Line Roll, Edge Guides and Tension Stand, Ruesch Ring Type Slitter Head (Option for Additional Head with Same ), Exit Pass Line ...more
24" x .09" Ruesch slitting line, 5000 lb., 4" arbor, uncoiler, pass line roll, edge guides & tension stand
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Ruesch
, Max Coil Weight: 5000#, Max Coil Thickness:.090, Entry Coil ID: 16-20, Entry Max Coil OD: 50, Exit Coil ID: 20, Exit Max Coil OD: 60, Complete with the Following Components:, Uncoiler, Pass Line Roll, Edge Guides and Tension Stand, Ruesch Ring Type Slitter Head, Exit Pass Line Roll, Scrap Winder, Recoiler, Hydraulic ...more
24" x .125" Wean slitting line, 6000 lb., uncoiler, slitter, recoiler
G-2000 | Toledo, OH
Category: Slitting Lines
Seller: G-2000
Location: Toledo, OH
Mfr: Wean
Uncoiler:, 6,000 lb, 24" Width, 20" Id, Hydraulic Expansion, Slitter:, 24" Width, Max Thickness:.125", Min Thickness:.025", Recoiler:, 6,000 lb, 24" Width, 20" Id, Manual Expansion, Air Clutch, Slitter Tooling Available., Machine Type.Slitters & Slitting Lines Manufacturer.WEAN UNITED Model.N/A Year.N/A ...more
24" x .2" Emag, slitting line, 15000 lb., 64" OD, 20" ID,.050"-.200" gauge range,.500"-24" width range, 1990
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Emag
Year: 1990
, Manufacturer: Emag, Year: 1990, Max. Coil: 15,000 #, Max. OD: 64”, Coil ID: 20", Gauge Range.050" -.200", Width Range.500 - 24", Min. Width of Master Stock: 2.000, Max width of Master Stock: 24.500, Line Direction: Left to Right, Line Includes:, Exit 2-Arm Turn Stile, Entry L-Type Coil Car, Peeler Pinch Side ...more
