1 / 5
Click to zoom in
1 / 5
For Sale by National Machinery Exchange
Surplus Record Dealer Since 1939
Location: Newark, NJ
Contact Sales / Andreia
Phone Number: 973...> Show Phone Number 973-358-7208
Let the seller know you found their listing on Surplus Record!
Description
SPECIFICATIONSITH BLADES
-MANUFACTURER: RUESCH
-TYPE: RING SLITTER
-SIZE: 10" (254mm) WIDE
-ARBOR
-DIAMETER: 4" (101.6mm)
-FACE WIDTH: 11" (279.4mm)
-DRIVE MOTOR: GENERAL ELECTRIC GEARMOTOR
7 1/2" HP (5.6Kw) 1760 RPM
220/440 VOLT 3 PHASE 60 HERTZ
20.6/10.3 AMPS
58.62/1 RATIO
NOTE: SLITTER IS EQUIPPED WITH ENTRY GUIDES.
-WINDER
-TYPE: MOUNTED ON SLITTER
DRIVEN OFF MAIN SLITTER MOTOR
-MANDREL SIZE
-DIAMETER: 10" (254mm)
-FACE WIDTH: 12" (304.8mm)
-MANUFACTURER: RUESCH
-TYPE: RING SLITTER
-SIZE: 10" (254mm) WIDE
-ARBOR
-DIAMETER: 4" (101.6mm)
-FACE WIDTH: 11" (279.4mm)
-DRIVE MOTOR: GENERAL ELECTRIC GEARMOTOR
7 1/2" HP (5.6Kw) 1760 RPM
220/440 VOLT 3 PHASE 60 HERTZ
20.6/10.3 AMPS
58.62/1 RATIO
NOTE: SLITTER IS EQUIPPED WITH ENTRY GUIDES.
-WINDER
-TYPE: MOUNTED ON SLITTER
DRIVEN OFF MAIN SLITTER MOTOR
-MANDREL SIZE
-DIAMETER: 10" (254mm)
-FACE WIDTH: 12" (304.8mm)
Get Your Price from National Machinery Exchange!
Buyers Who Viewed This Listing Also Viewed:
9" x 2.5" National Standard, pull thru line, dual recoilers, L to R
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: National
National Standard Slitting Line, Pull Thru Slitting Line with Dual Takeups, -Capacity:, Material Width: 9", Thickness Range: 0.020" (0.508mm) - 0.062" (1.57mm), Number of Cuts: 9 Cuts 0.020" (0.508mm) approx., 6 Cuts 0.062" (1.57mm) approx., Line Direction: Left to Right, Consisting of:, -Uncoiler:, Type: Non-Driven ...more
10" x 2-5/8" National Standard slitting line, finger set up, #12674
Category: Slitting Lines
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: National
MACHINE# 12674, MANUFACTURER: NATIONAL STANDARD, TYPE SLITTER: PULL THRU FINGER SET UP, ARBOR SIZE: 10" (254mm) x 2 1/2" (63.5mm), CAPACITY:, THICKNESS RANGE: 0.005" (.127mm) - 0.062" (1.6mm), NUMBER OF CUTS: 9 CUTS 0.005" (.127mm) - 6 CUTS.062" (1.6mm), DRIVE MOTOR: 15 HP REEVES, 44/22 AMPS ...more
12" x 4" N Ferrara #2187/4SH-75-5TR-V-R29-0107, 4" hi precision slit.line w/traverse winder
Category: Slitting Lines
Seller: N Ferrara Inc
Location: Somerset, MA
Mfr: N Ferrara
Model: 2187/4SH-75-5TR-
-Material: Gold, Silver, Steel, Brass, Wire Mesh, Copper, -Traverse Winder: 203,000' Cap. Max., -Starting Width: 3'' Maximum, -Thickness Range:.012"Wide min 0.002''/0.020'', -Weight Capacity: 90 lbs Maximum per coiler, -Speed Range: 0-500 F.P.M., -Volts: 220, -PH: 3, -CY: 60, Uncoiler ...more
12" Loopco #12-4SL, 8000 lb. W/ 16" ID
Category: Slitting Lines
Seller: AMM Industries, LLC
Location: Sylvania, OH
Mfr: Loopco
Model: 12-4-SL
Year: 1985
12" x .032" B+S, Precision Traverse Winding Slitting Line, LR, 656 FPM, 480 V., 2022
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Year: 2022
Line s:, Direct tension between decoiler and slitter, Running of the material at the drive side, Decoiler:, Strip edge control system (EPC), Tension measuring and regulation with force-measuring bearings at the deflection roll, Slitting Shear:, Rubber bonded spacers, Steel stripper rings, Running of the material at ...more
