1 / 4
Click to zoom in
1 / 4
For Sale by Galaxie Corporation
Surplus Record Dealer Since 1992
Location: Wayne, MI
Contact Sales Dept.
Phone Number: 734...> Show Phone Number 734-727-0600
Let the seller know you found their listing on Surplus Record!
Description
Brand STANAT
Stock #102068A
Condition Used
SPECIFICATIONS
Width 8 inches
Thickness .062 inches
Capacity 2000 pounds
EQUIPPED WITH
Gauge Range: 0.001" - .062"
Complete Line with The Following:
Mandrel Uncoiler
Slitting Head
Entry Guide Parallel Adjustment of Top Arbor
Arbor Diameter: 2.625"
Knife Diameter: 7"
Spacer Diameter: 4.5"
Large Amount of Knives
Recoiler
Coil ID: 6" - 16"
Coil OD: 6"
ID: 16"
ID: 36" Max OD
Overarm Separator
25 HP US Motors direct drive - 1150/2000 rpm
Banding Line
Downlayer
20' Exit Conveyor
Signode Banding Head with Turntable
Skid Loading Conveyor
Installed
Stock #102068A
Condition Used
SPECIFICATIONS
Width 8 inches
Thickness .062 inches
Capacity 2000 pounds
EQUIPPED WITH
Gauge Range: 0.001" - .062"
Complete Line with The Following:
Mandrel Uncoiler
Slitting Head
Entry Guide Parallel Adjustment of Top Arbor
Arbor Diameter: 2.625"
Knife Diameter: 7"
Spacer Diameter: 4.5"
Large Amount of Knives
Recoiler
Coil ID: 6" - 16"
Coil OD: 6"
ID: 16"
ID: 36" Max OD
Overarm Separator
25 HP US Motors direct drive - 1150/2000 rpm
Banding Line
Downlayer
20' Exit Conveyor
Signode Banding Head with Turntable
Skid Loading Conveyor
Installed
Get Your Price from Galaxie Corporation!
Buyers Who Viewed This Listing Also Viewed:
8" x .062" Stanat Design slitting line w/banding line, 2000 lb., mandrel uncoiler, recoiler 6-16" ID, 36" outside dimension
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Stanat
The 8” x.062” x 2,000# Stanat Design Slitting Line with Banding Line is a versatile piece of industrial equipment tailored for precise material handling needs. It offers a material thickness range of.001” to.062” and can handle strip widths from.0937” to 8”. The system accommodates ...more
9" x 2.5" National Standard, pull thru line, dual recoilers, L to R
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: National
National Standard Slitting Line, Pull Thru Slitting Line with Dual Takeups, -Capacity:, Material Width: 9", Thickness Range: 0.020" (0.508mm) - 0.062" (1.57mm), Number of Cuts: 9 Cuts 0.020" (0.508mm) approx., 6 Cuts 0.062" (1.57mm) approx., Line Direction: Left to Right, Consisting of:, -Uncoiler:, Type: Non-Driven ...more
10" x 4" Ruesch, Ring Slitter, 11" face width, entry guides
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
ITH BLADES, -MANUFACTURER: RUESCH, -TYPE: RING SLITTER, -SIZE: 10" (254mm) WIDE, -ARBOR, -DIAMETER: 4" (101.6mm), -FACE WIDTH: 11" (279.4mm), -DRIVE MOTOR: ELECTRIC GEARMOTOR, 7 1/2" HP (5.6Kw) 1760 RPM, 220/440 VOLT 3 PHASE 60 HERTZ, 20.6/10.3 AMPS, 58.62/1 RATIO, NOTE: SLITTER IS ENTRY GUIDES., -WINDER, -TYPE: ...more
10" x 2-5/8" National Standard slitting line, finger set up, #12674
Category: Slitting Lines
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: National
MACHINE# 12674, MANUFACTURER: NATIONAL STANDARD, TYPE SLITTER: PULL THRU FINGER SET UP, ARBOR SIZE: 10" (254mm) x 2 1/2" (63.5mm), CAPACITY:, THICKNESS RANGE: 0.005" (.127mm) - 0.062" (1.6mm), NUMBER OF CUTS: 9 CUTS 0.005" (.127mm) - 6 CUTS.062" (1.6mm), DRIVE MOTOR: 15 HP REEVES, 44/22 AMPS ...more
12" x 4" N Ferrara #2187/4SH-75-5TR-V-R29-0107, 4" hi precision slit.line w/traverse winder
Category: Slitting Lines
Seller: N Ferrara Inc
Location: Somerset, MA
Mfr: N Ferrara
Model: 2187/4SH-75-5TR-
-Material: Gold, Silver, Steel, Brass, Wire Mesh, Copper, -Traverse Winder: 203,000' Cap. Max., -Starting Width: 3'' Maximum, -Thickness Range:.012"Wide min 0.002''/0.020'', -Weight Capacity: 90 lbs Maximum per coiler, -Speed Range: 0-500 F.P.M., -Volts: 220, -PH: 3, -CY: 60, Uncoiler ...more
