go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

18" x 5-1/2" Pro-Eco, Slitting Line, 20000 lb., 20"-24" expansion range, hydraulic expansion, 20" face mandrel, Stock # 0519221

Manufacturer: Pro-Eco
Width: 18.0
Arbor or Max Thickness: 5.500
Lbs.: 20000
Stock # 0519221

For Sale by G-2000

Surplus Record Dealer Since 2011
Platinum Level Dealer
Location: Toledo, OH
Contact Evan Yoder
Let the seller know you found their listing on Surplus Record!

Description

-UNCOILER:
20" - 24" EXPANSION RANGE
HYDRAULIC EXPANSION
20" FACE MANDREL
4 SEGMENT MANDREL
HOLDOWN ARM
AIR OPERATED DISC BRAKE

-SLITTER HEAD:
5.5" DIA. X 21.5" FACE ARBORS
6.5" DIA ENTRY PINCH ROLLS
ENTRY SIDE GUIDES
40 HP AC MOTOR, 1770 RPM, 440 VOLT
GEAR REDUCER W/ 11.4:1 RATIO
65" PASSLINE HEIGHT

-SCRAP WINDER:
HYDRAULIC MOTOR DRIVE
OSCILLATE WIND

-TENSION STAND:
DRAG WIPE DESIGN
9' LONG PIT TABLE
ENTRY PASSLINE ROLL
EXIT CROP SHEAR
20" LONG BLADE
HYDRALIC CYLINDER OPERATED
EXIT SEPERATOR TOOLING BAR
EXIT THREADING TABLE TO RECOILER
61" PASSLINE HEIGHT

-RECOILER:
16" DIA. X 21.5" FACE DRUM WITH 20" AND 24" DIA. BOLT ON PADS
MANAUL CLAMP AND EXPANSION
HYDRAULIC PUSHOFF
50 HP AC MOTOR, 1765 RPM, 460 V
3 PHASE INVERTER DUTY AC INDUCTION MOTOR
BELT DRIVEN WITH 1.6:11 RATIO APPROX MAIN GEARBOX WITH HORTON AIR HOLDING BRAKE
53" PASSLINE HEIGHT
OVERAL SIZE: 108" L X 82" W X 83" T

2 ARM TURNSTILE
MANUAL ROTATION
FREE STANDING OVERARM SEPERATOR



Specifications
Machine Type......Slitters & Slitting Lines
Manufacturer......PRO ECO
Model......N/A
Year......N/A
Condition......Very Good

Get Your Price from G-2000!

Buyers Who Viewed This Listing Also Viewed:

18" x 2.625" Ruesch, ring type slitting line, 6000 lb., 32" mandrel face, 4-leaf hydraulic expansion, 8"-16" ID, 60"-72" outside dimension

Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Ruesch
This used Ruesch Ring Type Slitting Line is engineered for industrial efficiency, handling coils up to 6,000 lbs. It accommodates a maximum material width of 18 inches and can process coils with an entry inner diameter of 16 inches and a maximum outer diameter of 72 inches. On the exit side, coil inner diameter ...more

18" x 0.025" PM/Andritz, Oscillating Slitting Line, L to R, 120,000 psi tensile strength, 15 HP mandrel uncoiler, 1500 FPM

Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Material: 1095 High Carbon Steel, Tensile Strength: 120,000 PSI, Shear Strength: 96,000 PSI, Thickness Range:.0045" -.025", Line Direction: Left to Right, Cut Width & Thickness,.0045" = 1/4", 3/8", 1/2", 3/4", 1",.0051" = 3/8", 1/2", 5/8", 7/8",.0062" = 3/8", Line Speed: 1500 FPM, Entry Strip Width: 18' ...more

18" x 2.625" Waterbury-Farrel, slitting line, 2500 lb., 16"-20" ID, 32.5" mandrel face width, 39.5" passline

Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Waterbury-Farrel
18" x 2.625" x 2,500# Waterbury Farrel Slitting Line, -Uncoiler: Littell, 2,500 lb. Capacity, 16" - 20" Coil I.D. Range, Manual "Link Type" Expansion, 32.5" Mandrel Face Width, Air Operated Disc Brake, Sliding Base, Hydraulic Cylinder Actuated, 42" Dia. Back Plate, 39.5" Passline from floor to Center of Mandrel, Note: ...more

18" x 3" Yoder #M2, Pull Through Slitting Line, w/Uncoiler, Slitter & Recoiler, 2500 lb. Uncoiler & Recoiler capacity, 6" outside dimension Knives, 150 FPM

Category: Slitting Lines
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Yoder
Model: M2
AMERICAN ASC UNCOILER COIL REEL, SERIAL. 2550, CAPACITY. 2,500 LBS, MANDREL WIDTH. 22", ID EXPANSION. MANUAL, NON MOTORIZED. YES, YODER SLITTING HEAD, MODEL. M2, WIDTH. 18", ARBOR. 3", KNIVES. 6" OD, CAPACITY. 8 CUTS OF.078"; 19 CUTS OF.031", CAPACITY. 14 CUTS OF.044"; 12 CUTS OF.062", SPEED. 150 FPM, RECOILER COIL ...more

18" x 2.9" Ruesch, Slitting Line, 6000 lb. capacity, 28" face Uncoiler, 36" Deck Lift Cart, 16" ID Recoiler

Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
, MFG: RUESCH, Uncoiler, Model: N3022B S/N: 6195, 6,000# capacity, 28" face, Slide Base, Hydraulic Expansion, 12" dia. to 16" ID with pads, Lift Cart: 36" Deck, Guild Butt end Welder, Roll type Crop Shear, Edge Guides: 22: Max. Opening, Slitter heads(Two), Model: N3022E S/N: 6195 model 149 heads ...more

Share