Buy or Sell Your Circular Cold Saw Machine

Cutoff Diameter 3/16" Shank Length 1" Cutoff Length 1 1/2" Pieces Per Minute 225 Electrics AC Motor and Controls Weight 3750 Lbs. O.A. Dimensions 4 x 6 x 5H.

Maximum Cutoff Diameter 1/4" Maximum Cutoff Length 5 5/16" Maximum Shank Length 4 1/8" Pieces per Minute Up to 100 Electrics AC Motor and Controls Weight 8400 Lbs. O.A. Dimensions 5' x 10', Wire Straightener, AC Variable Speed Drive.

3/8" ASAHI OKUMA MDL# AOT 10B 2 DIE 2 BLOW COLD HEADER, MAXIMUM CUTOFF DIAMETER (100,000 PSI) (.393") - 10MM, MAXIMUM KICKOUT LENGTH ( 3") - 76.2MM, MINIMUM KICKOUT LENGTH (.590") - 15MM, MAXIMUM CUTOTFF LENGTH ( 3.149") - 80MM, PIECES PER MINUTE - 200, ELECTRICS - AC MOTOR AND CONTROLS 200 VOLTS 3 PHASE, WEIGHT - ...more

Cutoff Diameter 9/16" Shank Length 5" Cutoff Length 6" Pieces per Minute 100 Motor and AC Controls 50 HP 280/440 Volts Weight 50,000 Lbs. O.A. Dimensions 18'x 7' x 7'H, Bushing Cutoff, PKO.

Approx. 12” blade, 2-1/2 HP motor, vice for holding materials, 230 volt single phase.

Blade Size 12" Cutting Capacity: Round Tube 3 1/2" Round Solid 3" Square Solid 2 3/8" Blade Speed 1750 RPM WEIGHT 600 LBS s Automatic/Manual Air Vise MEP Control, 350mm Blade.

MODEL. SD24, NUMBER OF CUTTING HEADS. 2, CUTTING LENGTH. 12', CUTTING CAPACITY. 9-1/2" X 4", CUTTING CAPACITY @ 45 DEGREES. 6-1/4" X 4", CUTTING CAPACITY @ 30 DEGREES. 4-1/2" X 4", MITERS. 45 DEGREES BOTH DIRECTIONS, COMPOUND CUTTING. YES.

Max Cutoff Diameter 7.5mm, Max Cutoff Length 180mm, Shank Length 75 – 155, Cutoff Die 20 x 35 (dia x length) Die 50 x 190, 1st Punch 28 x 57, 2nd Punch 40 x 64, 1st Punch KO Stroke 22, 2nd Punch KO Stroke 18, Production Speed 70ppm, Main Motor 7.5kw (4P), Lubrication Oil Reservoir 45 L.

Cutoff Diameter 3/16" Shank Length 1" Cutoff Length 1 1/2" Pieces Per Minute 225 Electrics AC Motor 3HP 220/440 Volts, Reeves Vari Drive Weight 3750 Lbs.

Cutoff Diameter Alloy Steel 6mm Shank Length 75mm Cutoff Length 95mm Pieces Per Minute 100,120 Electrics AC Motor and Controls Weight 7500 Lbs. O.A. Dimensions 8 x 4 x 6H, 2 Plane Straightener.

Cutoff Diameter 8mm 1st Die KO 115mm 2nd Die KO 60mm Pieces Per Minute 50-120 Electrics 15 HP Motor and Controls Weight 22000 Lbs., Exit conveyor, wire straightener, Brankamp Model ECO 600 process monitor.

It is a 2 saw re-rip with one moveable saw and an adjustable fence., Capacities:, Minimum length = 8”, Maximum length = 192”, Minimum width = 1 ½”, Maximum width = 6”, Minimum thickness = 7/8”, Maximum thickness = 1”.

Cutoff Diameter Mild Steel 1/4" Cutoff Diameter Alloy Steel 3/16" Min/Max Shank Length 1/8"-2 1/2" Cutoff Length 2 5/8" Pieces per Minute 200 Motor and AC Controls 15 HP 230/460 Volts Weight 11,000 Lbs., Bushing Cutoff, PKO, RKO, Face of die Stripper.

Carlo Salvi Model RF/ML Semi Tubular Cold Header, Built 1975, 1/4" Cutoff Diameter, 2" Shank Length, 2 1/2" Cutoff Length, 250 Pieces Per Minute, AC Motor and Controls, Weight 7000 Lbs..

Cutoff Diameter 7.0mm Mild Steel Diameter @ High Tensile Steel 6.0mm Cutoff Length 60.0mm Maximum Shank Length 50.0mm Maximum Transfer Length 60.0mm Pieces per Minute 50-200, Impax Unit.

Maximum Wire Diameter 1/8" Maximum Shank Length 5/8" Maximum Cutoff Length 1 1/4" Pieces Per Minute 100 Electrics AC Motor and Controls Weight 1800 Lbs.

Cutoff Diameter 9/16" Die Kickout (1st) 5 1/8" Die Kickout (2nd) 3 9/16" Cutoff Length 4" Pieces per Minute 100 PKO Stroke 21/32" Horse Power 30 Electrics 230/460 Volts AC Motor and Controls Weight 15,200 Kg., Bushing Cutoff, RKO, PKO, Two Plane Straightener.

Cutoff Diameter 7.0mm Mild Steel Diameter @ High Tensile Steel 6.0mm Cutoff Length 60.0mm Maximum Shank Length 50.0mm Maximum Transfer Length 60.0mm Pieces per Minute 50-200, Impax Unit.

CUTOFF DIAMETER 3/16", MAXIMUM SHANK LENGTH 1 3/8", MAXIMUM CUTOFF LENGTH 2 3/8", PIECES PER MINUTE 450, ELECTRICS 10 HORSE POWER AC MOTOR AND CONTROLS 230/460 VOLTS, WEIGHT 8000 LBS., KICK PIERCE MECHANISM FOR MAKING SEMI TUBULAR RIVETS, 5 ROLL SINGLE PLANE STRAIGHTENER.

Cutoff Diameter 8mm 1st Die KO 115mm 2nd Die KO 60mm Pieces Per Minute 50-120 Electrics 15 HP Motor and Controls Weight 22000 Lbs., 2 Plane wire straightener, Exit Conveyor, Brankamp Process Monitor model ECO 600, PKO, DC Vari Drive.

Used 2008 Kasto speed 10. Machine Tool Bids offers plenty of Cold Saws and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Kasto speed 10 or any of our machines., MACHINE, Capacity: 4"x 3", Blade Drive: 14 hp, Cutting Speed: 55 to 575 FPM, Clamping Force: ...more

Blade Size 14" Cutting Capacity: 90 Degree 45 Degree Round Tube (45 Degree) 4-3/4" Square Tube (45 Degree) 3.6" Solids (45 Degree) 2-1/2" Voltage 230v, 3 Phase Dimensions ( L x W x H ) 36" x 26" x 58" WEIGHT 750 Lbs. S: Mitering Head Single Phase Motor Coolant Systerm.

MANUFACTURER - METLSAW, MODEL - CS216-T8, TYPE - ALUMINUM PROFILE EXTRUSION SAW, CAPACITY - 24" W X 8" H, CONTROLS - ALLEN BRADLEY TOUCH SCREEN, BACKGAUGE - 12', CUT LENGTH RANGE - " - UNLIMITED, MOTOR - 30 HP, CARRIAGE CUTTING SPEED - TO 500"/MIN, BACKGAUGE INCREMENT SPEED - TO 500"/MIN, BACKGAUGE REVERSE SPEED - ...more

SERIAL. 9351, MODEL. 16/60/10/H, PNEUMATIC. 350/450, BLADE SIZE. 20" DIAMETER, MITRE GUIDE, TABLE. 27" L-R, TABLE HEIGHT. 32" ABOVE FLOOR, MOTOR 10/20 HP 220/ 440 - 3470 RPM, OVERALL FLOOR AREA 60" L-R X 60" F-B.

Cutoff Diameter 9/16" Die Kickout (1st) 5 1/8" Die Kickout (2nd) 3 9/16" Cutoff Length 4" Pieces per Minute 100 PKO Stroke 21/32" Horse Power 30 Electrics 230/460 Volts AC Motor and Controls Weight 15,200 Kg., Bushing Cutoff, RKO, PKO, TRIM CAPABLE, Two Plane Straightener, 15,200 Kgs.

One Used 5/16" Waterbury Farrel Model #11 Single Stroke Open Die Hand Feed Re-Header, 5/16" Maximum Wire Diameter, 5 1/2" Open Die Cavity, Note this machine does not have a feed box. It was designed to hand feed special long parts and double end parts with upgraded electrics and motor/clutch drive to accommodate hand ...more

FOM BLITZ ALVA 500A DOUBLE HEAD MITRE SAW, NEW 2014, Fom Industrie Blitz Alva 500, Double Heads, 3-Axis, 19.7" Max. Cutting Capacity, 94.5" Mobile Head Roller Table, 2.9 HP Blade Motor, 3 Horizontal Vises, 2 Vertical Vises, Profile Height Measuring Device, Vertical Vises Internal Side of Blade: 2, Electronic Profile ...more

Maximum Cutoff Diameter (85,000 PSI).433" Minimum/Maximum Cutoff Length.394"-3.937" Minimum/Maximum Kickout Stroke.315" - 2.953" Minimum/Maximum PKO Stroke.433"-.984" Pieces per Minute 300 Totoal Heading Load 500 Kn O.A. Dimensions 7'4" W x 15'7" L Weight 26,000 Lbs., Bushing Cutoff, Auto Adjustment of Feed ...more

Used Pedrazolli Brown 60 CDB. This pre-owned is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Pedrazolli we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us today., Max ...more

NUMBER OF DIES - 6, CUTOFF DIAMETER - 33MM, LENGTH UNDER HEAD - 50-250MM, CUTOFF LENGTH 20-300MM, CUTOFF KNIFE LENGTH - 105MM DIA. X 34MM, CUTOFF QUILL LENGTH - 100MM DIA. X 150MM, PUNCH DIA LENGHT - 110MM DIA X 300MM, DIE DIA LENGTH - 150MM DIA X 350MM, CENTER DISTANCE - 168MM, P.K.O STROKE - 50 (62) MM, K.O. STROKE ...more

Cutoff Diameter 8mm Cutoff Length 100mm Transfer Length 85mm 1st Die KO 115mm 2nd Die KO 80mm PKO Stroke 1,2,3 Punch 20,30,10mm Pieces Per Minute 50-150 Electrics 15 Kw AC Motor and Controls Weight 12,000 Kg, Bramkamp model ECO 600 process monitor, 2nd Transfer, 2 Plane wire straighteners.

Make: METLSAW, Model: NF-10, Year: 1900, Machine Location: Kansas, Cut Thickness 10”, Nonferrous Metals, Allen Bradley CNC Control, Shuttle Table.

Cutoff Diameter @ 115,000 PSI.320" Cutoff Length (solid cutter) 11/16" Cutoff Length ( modified cutter) 1-7/32" Pieces per Minute 240 Electrics 11Kw 440 Volts AC Motor and Controls Weight 11,500 Lbs., Bushing Cutoff, AC Vari Drive.

SERIAL. 300-871498, MODEL. 2013-V, PARTS MACHINE MISSING GEAR BOX.

Cutoff Diameter 5/8 (alloy steel) Cutoff Diameter 3/4 (mild steel) Die Kickout 3" Cutoff Length 2 1/2" Pieces per Minute 100-120 Weight 52,000 lbs, Brankamp Process Monitor model ECO 600, Overtop PKO, IFO transfer, 2 Plane wire straightener, Transfer Fixture, SMOG hog air cleaner, 50 Kw Motor.

Maximum Cutoff Diameter 9mm (mild steel) Maximum Cutoff Length 75mm Shank Length 50mm Pieces per Minute 250 Weight 7000 kg, Bushing cutoff, PKO 1s & 2nd timed, Variable speed drive, Brankamp Process Monitor model ECO 600, 2 Plane wire straightener, Exit Conveyor.

WATERBURY MODEL 33 SINGLE DIE DOUBLE STROKE HEADER, SERIAL. 220713, DIAMETER CAPACITY. 1/2", LENGTH OF P0ART DIE NOT RECESSED. 4", LENGTH OF WIRE BLANK. 6-1/4", PRODUCTION PER MINUTE. 60-70 PPM, R.P.M. OF FLYWHEEL. 140-160, STROKE OF CUT OFF. 3-1/4", STROKE OF CUT OFF WITH FIDDLE BOW. 2-11/16", STROKE OF KNOCK OUT. ...more

SERIAL. 42639, MODEL. KSV-630AK, NEW IN. 1980, DIAMETER OF BLADE. 28", CAPACITY RECTANGLES. 12" X 16", CAPACITY SQUARES. 7-1/2", CAPACITY ROUNDS. 9-1/8", CAPACITY H-BEAMS. 16" X 7", CAPACITY CHANNELS. 15"X 3-3/8", CAPACITY ANGLES. 8" X 8", BLADE SPEEDS. 23.6 TO 78.7 SFPM, AUTOMATIC CLAMPING. YES, AUTOMATIC SPEED & ...more

24” Non - Ferrous Saw with 24” Backguage Length., Cutting Window: 24”, Cutting Height: 8” - 14”, Backgauge Length: 12’, Cut Length Range: ½” - Unlimited, Motor: 30 HP, Carriage Cutting Speed: 500”/Min, Backguage Reversse Speed: 800/Min, Power: 460/480 @ 80 Amp ...more

Used 2000 Pedrazolli Brown 60 CDB. Machine Tool Bids offers plenty of and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Pedrazolli Brown 60 CDB or any of our machines., MACHINE, Max Diameter: 2.34", Tooling: 1-1/2" Square.

Cutoff Diameter 5/16″, Shank Length 1 1/2″, Cutoff Length 2 3/4″, Pieces Per Minute 250, Electrics 20 HP 220/440 Volts AC Motor, Bushing Cutoff, PKO, Process Monitor.

SOCCO HIGH SPEED NON-FERROUS AUTOMATIC CUT-OFF SAW, MODEL: MC-350NFA, SERIAL NUMBER: 95MND35001661, Maximum Saw Blade Diameter: 14", Cutting Capacity, Round Solid @ 90 Degrees: 4-1/4", Cutting Capacity, Square Solid @ 90 Degrees: 4" x 4", Cutting Capacity, Round Tube @ 90 Degrees: 4-1/4", Cutting Capacity, Rectangular ...more

, FORGING STATION: 5 STATIONS (INCL. CUTOFF), MAXIMUM CUTOFF DIAMETER: 23mm, MINIMUM CUTOFF LENGTH: 20mm, MAXIMUM CUTOFF LENGTH: 175mm, MAXIMUM KICKOUT LENGTH: 130mm, PRODUCTION (PER MINUTE): 120ppm, PKO: 30mm, FORGING LOAD: 220tons, DIE DIAMETER: 120mm, PUNCH DIAMETER: 100mm, QUILL DIAMETER: 75mm, DIE CENTER ...more

PMI 24″ Automatic High Production Non-Ferrous Cut-Off Saw, PMI-455 L, Inventory # 7894, Model: PMI-455 L, The PMI-455 L is designed for sawing aluminum and other non-ferrous metals. The PMI-455 saw’s powerful 15 HP saw motor allows it to cut extrusion and smaller solids quickly and accurately while ...more

Inventory No. 0110-004-6806 Manufacturer Roll-in-saw Model No. JE1320 Name Vertical Band Saw Arrival Date 11-14-2025 Dimensions L x W x H (inches) 48 x 35 x 82 Capacity 20" Weight (lb.) 850 Category Fabrication Condition Used Available Quantity 1 Serial No. 01004JG Make Year 2001 Item 24" X 24" Table, 1/4" Blade Width.

KASTO (USED) MODEL GKS 400 P COLD SAW, 0.4" SMALLEST POSSIBLE WORKPIECE DIAMETER, 0.4" SMALLEST POSSIBLE CUT-OFF LENGTH, 0.8" MIN REST PIECE LENGTH, 180 DEGREE TABLE ROTATION RANGE, 15.75" SAW BLADE DIMENSION, CUTTING CAPACITY AT 90 DEGREES, - 5.12" ROUND, - 10.24" X 3.15" FLAT, - ...more