Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

Product, Peddinghaus Peddimax 110/140 Hydraulic IronworkerPunch Tonnage: 110 Ton, Punch Stroke: 3/8″ – 2″, Punch Capacity: 1.25″ x 1″, Punch Throat Depth: 20″, Punch Strokes Per Minute: 22, Shear Tonnage: 140 Ton, Flat Bar Shear Capacity: 20″ x 5/8″; 16″ x ...more

Product Information, Ironworkers PRODUCT NEW - ON REQUEST: Type:Hydraulic Work stations:5 1.- Punch:1-1/16" x 3/4" 2.- Bar shear:Round: 1-1/2", Square: 1" 3.- Plate shear:3/4" x 10", 5/8" x 15" 4.- Angle cut:5" x 5" x 3/8" 5.- Notcher:2-3/4" x 4" x 1/4" Voltage / Phase:230, 460 | 3 Weight:2,600 lbs Dimensions:24" x ...more

Model: 500, Year: 1986, Capacity: 1/2", Cutting Length: 144", Front Operated Power Backgauge: 48", Rake Angle: 1/2" IPF, Number Of Hold Down: 15, Hold Down Force: 23.8 Ton, Strokes Per Minute @ 12' : 17, Strokes Per Minute @ 12" : 50, Passline Height: 36", Control: CNC, Motor: 40 Horsepower, 12 Feet1/2" Mild Steel.

¼” X 10’ Hydraulic Shear with Knuth Conversational Controls, Front Operated Backgauge and Blade Gap., Max Thickness:.25”, Length of Blade: 125”, Voltage: 220/440V / 3Ph / 60 Cycle, Dimensions: 160” X 64” X 64”, Weight: 16,000 Lbs, INCLUDES: Knuth Conversational ...more

, -Make: Wysong, -Model: HS-760-RKB, -63" wide, -10 gauge, -20 HP Motor.

1/4" x 6' AMADA MECHANICAL SHEARMODEL M-2060… S/N 2600432… NEW 1983 MAX. CUTTING LENGTH… CAPACITY. 78.74" x.236" THICKNESSBLADE LENGTH. 90.5"GAP DEPTH. 2.56"RAKE ANGLE. 1 DEGREE 28'STROKES PER MINUTE. 60 SPMNUMBER OF HOLDDOWN UNITS. 9 BACKGAUGE - MOVEMENT RANGE.39 ...more

SKU: 138689, Model: 125XS, Year: 1995, Condition: Used, S/N: 698495, Electrical :, Voltage: 230/460 volts, Phase: 3-phase, Tons: 125 ton, Additional :, Punch capacity: 1-3/8" hole through 1" plate, Stroke Length: 3-1/8", Throat: 14", Shearing Flat: 24" x 5/8", Shearing Round: 1/4" to ...more

SERIAL. 1058-0690, MODEL. CC148OH, CAPACITY. 14 GAUGE, LENGTH OF CUT. 80", BACK GAUGE. 24" REAR OPERATED, STOKES PER MINUTE. 40, SQUARING ARM. YES, ELETRIC FOOT PEDAL. YES, MOTOR HORSEPOWER. 3.

Punching (110 Tons) 1 7/16" diameter through 1" plate Throat Depth 12 inches Bending (Optional) 12" up to 24" w/4-way die block Round Bar Shear 1/2" through 2" Square Bar Shear 1/2" through 1 3/8" Flat Bar Shear 20" x 1/2", 18" x 3/4", 12" x 1" Angle Shear 6" x 6" x 5/8" Coping/Notching 4" x 6" x 3/8" Motor 10 HP ...more

Very good condition Geka Hyrocrop 110 ton ironworker, with tone of tooling and "C" channel blades as well as rod shear angle shear, flat bar shear, coper/notcher and of course punch station, two foot pedals, Boxes of tooling, Electric Stop and cut length gauge, note tooling on wood table same as tooling in green box ...more

SERIAL. 46895, MODEL. 76B, CAPACITY. 1/4", OVERALL LENGTH OF BLADE. 74-1/2", STROKES PER MINUTE. 65, REAR OPERATED MANUAL BACK GAUGE. 24", NUMBER OF HOLD DOWNS. 15, SQUARING ARM. YES, RAKE UPPER KNIFE. 5/16" PER FT, FRONT ARM SUPPORT. 1, FOOT TREADLE. FULL LENGTH, PASSLINE HEIGHT. 30", MOTOR. 5 HORSEPOWER.

, -60" x 0.135" Capacity, -Model: G18L-60, -Hydraulic Actuated, -Blade Length: 61", -Overall Size: 84" L x 27" W x 83" High.

Max. Capacity Width: 49.25"Max. Plate Thickness: 0.098"Backgauge Travel: 0.219" - 26.793"Manual Front Gauge: 40", Adjustable Rake and GapAutomatic BackgaugeHydraulic Hold Downs2 Extra Blades.

SERIAL. 326888T, MODEL. HS414, LENGTH OF BLADES. 52", CAPACITY, MILD STEEL. 14 GAUGE, CUTS PER MINUTE. 40, HYDRAULIC MOTOR. 3 HP, MACHINE PRICED LESS HYDRAULIC MOTOR.

ROPER WHITNEY, PH52, 10 GA X 4' SHEAR, 575/3/60, ROPER WHITNEY PH52, Max Gauge. 16 gauge, Length of Blade. 48".

SERIAL. 47153 MODEL. 0806 CAPACITY. 6' X 1/2" MILD STEEL DISTANCE BETWEEN HOUSINGS. 6'4" BLADE THICKNESS. 1-1/8" BLADE RAKE PER FOOT. 3/8" THROAT DEPTH. 18" SPEED. 40 SPM NUMBER OF HOLDDOWNS. 7 TOTAL HOLD DOWN PRESSURE. 11-3/4 TONS BED HEIGHT ABOVE FLOOR. 32" FRONT OPERATED POWER BACK GAUGE. 36" FLUSH FLOOR ...more

Make: Otinus, Model: SMO-3108-C8, Year: 2023, Machine Location: Upon Request, Nominal Motor Power: 15.0 kW, Maximum Cutting Capacity for carbon steel sheets (S235 PN-EN): up to 8.0 mm, Maximum Cutting Length for Carbon Steel: 11′, Shear Angle: 1.8°, Strokes/min 13, Backgauge retract distance: 29″ ...more

Cincinnati Cut-to-Length Line Shear and Stacker, Capacity: 72" Wide x 0.135" Mild Steel, -Mechanical Upcut Shear:, Model: HHS 551, 72" x 0.135" Capacity, Entry Pass Line Rolls, Entry Side Guides, AC Motor, Air Clutch and Brake, -Measuring Table:, 72" Wide, 14' Long, Skate Wheel Conveyor, Mechanical Flag Type Stop ...more

Max. Cutting Length 120" Back Gauge Range 27" Throat 13 1/2" Type Hydraulic Number of Hold Downs (Hydraulic) 13 Strokes Per MInute 21 Horsepower 10 H.P. Dimensions (L x D x H) 145" x 72" x 62" WEIGHT 11,000 Lbs. s Front Operated Power Back Gauge With Indicator Square Arm (2) Front Supports Ball Transfer Table Electric ...more

Throat 7 inches Tonnage 50 tons Angle (L1) 4 inches Power 4 HP, PREOWNED KINGSLAND IRONWORKER, PREOWNED KINGSLAND IRONWORKER, model 50XA, designed for efficient and reliable metalworking in various industrial applications., Brand: KINGSLAND, Model: 50X, Stock #: 86635, Serial #: 788896, Punching Capacity: 38 mm ...more

WYSONG MODEL 1052 LINE SHEAR, MODEL 1052 RKB, CAPACITY: 12 GA., 52" WIDTH, AIR CLUTCH, BOW TIE BLADE, MOTOR: 15 HP 230/460V 3PH.

½” X 12’ Hydraulic Shear with CNC Control and Swing-Away Backgauge., Mild Steel Capacity: ½”, Length of Cut: 146”, Front Operated Power Back Gauge: 48”, Rake Angle: ½ IPF, Number of Hold Downs: 15, Hold Down Force: 23.8 Tons, Strokes Per Minute at 12’: 17 ...more

Make: Mansteel, Model: MSH-10250, Year: 1900, Machine Location: Alberta, Canada, – Cutting Capacity: 1/4″ (6.35mm) mild steel, – Cutting Length: 10’6”, – Throat Depth: 5-7/8”, – Rake Angle: 1°30’, – Motor: 15 HP, – Weight: ~16,100 lbs, – ...more

Make: Cincinnati, Model: 500HS-10, Year: 1990, Machine Location: Illinois, Capacity: 10′ x 1/2″, Cutting Length: 122-3/4″, Maximum Rake: 1/2″ Per Foot, Hold Downs: 13, Hold Down Force: 20.6 Tons, Speed: 19 to 53 Strokes Per Minute, Electrical: 480V/3PH, Approx. Shipping Weight: 25,000 Lbs. ...more

Make: Cincinnati, Serial # 47284, Model: 4SE20-FSU-3, Material Width: 20', Material Thickness: 1/2", Blade Length: 20.5', Throat Depth: 18", Number Of Holdowns: 23, Back Gauge Range: 60", Main Motor: 40 H.P., Max Speed: 28 spm, 60" Power Back Gauge, Electric Foot Switch.

ANGLE SHEAR:, in NON-DEFORM CUT in WITH NO MATERIAL LOSS, ANGLES SQUARE -------------------------- 5 in X 5 in X 1/2 in OR, 6 in X 4 in X 1/2 in, ANGLES ON 45 DEGREE MITRE (LEG IN) ----- 3 in X 3 in X 5/16 in, BAR SHEAR:, ROUND BARS ----------------------------- 1-3/4 in, SQUARE BARS ---------------------------- 1-3/4 ...more

16 GA. - MILD STEEL52"26".

Stock #: 133250022, Location: UT, Brand: Accurl, Model: MS8-6x3200, Year: 2020, Approx. Shipping Weight: 20,000 lbs, Loading Fee: Rigging Required, Cutting Capacity: 1/4" MS, Cutting Length: 10', Rake Angle: 0.5°~2.5°, Throat Depth: 5", Working Table Height: 33.8", Blade Length: 129.9" ...more

Capacity: 10 ft. x 3/8’’ mild steel, Backgauge.: 36’’, Year: 2007, Voltage: 230/460, 3 ph., Motor h.p.: 30, Approx. wt.: 21,700 lbs., Approx. dim.: 150’’L x 91’’W x 90’’T, 36’’ go-to backgauge control, Power blade gap, Adjustable stroke control ...more

” X 10’ Refurbished Shear with SP9 CNC Control, 40” Squaring Arm, Finger Protection Grid, Mobile Foot Control, Sheet Metal Clamps and 40” Motorized Rear Gauge, Working Length: 10’, Capacity of Mild Steel: ”, Min. Cutting Angle: 0.5°, Max. Cutting Angle: 3°, Number of Sheet ...more

Used 48" Famco Shear, 14 Gauge Model E12400, S/N S-170124 30" Table Height 1.5 HP Motor, Control Panel Approximate Dimensions: 110" L x 30" W x 52" H.

Strokes Per Minute (Adjustable) 26 Front Support Arm 24" Voltage 220/440V ~ 3 Phase Weight (Lbs.) 7,500 LBS. S: German Logic Quiet Hydraulic System Adjustable Stroke 60" Long Squaring Arm With Inch/mm Scale Work Light With Shadow Line.

SERIAL. 539, MODEL. PII-88, PUNCHNG CAPACITY, TONNAGE. 88 TON, ANGLE SHEAR CAPACITY. 5" X 5" X 3/8", THROAT DEPTH. 10", ANGLE SHEAR. 5" X 5" X 3/8", ROUND BAR SHEAR (MIN. TO MAX.). 1-1/2", SQUARE BAR SHEAR (MIN. TO MAX.). 1" X 1", PLATE SHEAR, BLADE LENGTH. 24", PLATE SHEAR (MIN. TO MAX.). 3/4" X 8" TO 1/4" X 24" ...more

“This machine is in solid condition but CHEAP!. All the gear teeth have good profile with no missing or chipped off teeth. The motor is warranted in good condition.The shear is painted but a bit dirty. The price reflects our need for space- NOT condition.”, BAR and BILLET SHEAR, ‘Bertram’ 10 ...more

New GMC 10' x 10 Ga. Hydraulic Metal Shear - Shearing Machines HS-1010M, - ISO 9001 certified, - Taiwan machines, - HS-1010M comes with 24 manual back gauge, one side handwheel operate ), - adjustment 0.004, inch/mm digital display, - Quick Change Blade Gap Adjustment (BGA), with gap dial, - Shadow line for ...more

Distance between housings. 8'3" LR, Holddowns. 9, Holddown total pressure (tons). 23, Rake. 1/2 IPF, Four-Edge knife size (L x Face x W). 8' x 4" x 1", Throat. 18", Distance floor to pass line. 34-3/4", Back Gauge Range. 36", Weight. 26.000 lbs., O.A. Dimensions.(lr x fb x high). 7'6" x 10'4" x 9' ...more

Capacity Mild Steel 12' X 1/2" Length Of Knives 162" Gap 163.5 Rake Angle 19.69 Hold-down 0 Degree To 1.5" (adjustable) SPM 40 Floor to top of bed 44-1/2" Pump Hydraulic Motor 40HP Electrical 230/460/360 Dimension (L x D x H) 186" X 96" 102" WEIGHT 36,400 Lbs s Foot Pedal Front Support Amada Controls and Back Gauging ...more

SERIAL. PII505, MODEL. PII-88, PUNCHNG CAPACITY, TONNAGE. 88 TON, ANGLE SHEAR CAPACITY. 5" X 5" X 3/8", THROAT DEPTH. 10", ANGLE SHEAR. 5" X 5" X 3/8", ROUND BAR SHEAR (MIN. TO MAX.). 1-1/2", SQUARE BAR SHEAR (MIN. TO MAX.). 1" X 1", PLATE SHEAR, BLADE LENGTH. 24", PLATE SHEAR (MIN. TO MAX.). 3/4" X 8" TO 1/4" X 24" ...more

Make: Accurshear, Model: 625012, Year: 2021, Machine Location: Upon Request, Capacity: 1/4″, Cutting Length: 12′, Blade Dimensions: 1″ x 3″ x 148″, Hold Downs: 19, Cycles Per Minute: 20-46, Motor: 20 HP, Back Gauge Range: 0-36″, Machine Weight: 21,000 LBS, Accurshear Control ...more

SERIAL. 5411, MODEL. MK-20, PUNCH CAPACITY:. 1-3/16" THRU 3/4", PUNCHING CAPACITY. 1" THRU 7/8", DEPTH OF THROAT. 20", SHEAR CAPACITY PLATE. 3/4", SHEAR CAPACITY FLATS. 6" X 3/4", SHEAR CAPACITY ROUNDS. 2-1/8", SHEAR CAPACITY SQUARES. 2", 90 DEGREE ANGLES. 6" X 6" X 1/2", 45 DEGREE ANGLES. 4" X 4" X 1/2", NOTCHER. 3" ...more

SERIAL. 46890, MODEL. 2500 X 12 FSU II, CAPACITY. 1/4", LENGTH OF CUT. 144", Back Gauge. 48” @ 120 IPM, Number of Hold Downs. 15 Under Hold Downs. ½” SPEED. 32 TO 70 SPM MOTOR. 25 HP, Programmable Control (Programs: Cut Length, Rake Angle, Blade Gap and 0 - 48” ...more

½” X 10’ Hydraulic Shear with ENC100 Controller, 72” Squaring Arm, 39” Capacity Backgauge, Quick Set Blade Gap Adjustment, 4 - Edged Blades and Transfer Balls on Table., Mild Steel Capacity: ½”, Stainless Steel Capacity: ”, Overall Cutting Length: 121”, Strokes ...more

Cutting Length: 122", Cutting Capacity:, Mild Steel 10 ga., Stainless Steel 13 ga., Rake angle: 1 degree, 30', Strokes per minute: 20, Motor Power: 7.5 hp, Front gauge: 24", Back gauge: 24", Shipping weight: 6,600 lbs., Packing size: 150" x 45" x 59".

40” x 11 ga. cap.Options or Upgrades, 24” manual b.g.

Denro Crop Shear, -Capacity: 0.187" x 78" wide, -Max. Shear Blade Length: 82.5", -Hydraulic Cylinder Actuated, 4.5" Bore x 10" Stroke cylinders, -Spring Loaded Holddown, -17" from Floor to Top of Bottom Blade, -No Valves or Controls, -Less Shear Blades, -In storage: Toledo, OH..

Weight8000 pounds, SERIAL. 3474 NEW. 08/1999 MODEL. 61356 CAPACITY. 10 GAUGE MS LENGTH OF CUT. 6’, BACK BAUBE. MOTORIZED, BACK GAUGE CONTROL. PROGRAMMABLE DIGITAL, STROKE CONTROL. VARIABLE KNIVES. 1" X 3" X 76" HOLD DOWNS. 10, HOLD DOWN TONNAGE. 10 TONS, SPEED, FULL STROKE. 34 SPM, SPEED, SHORT STROKE. ...more

1/4" x 10' Shear with SP 9 Front Operated Motorized Back Gauge, Squaring Arm, Hold Downs, Blade Gap Adjustment, 1 Position Pre-Selection Control From the Back Gauge with Digital Readout, 7-Segment LED Displays, Pre-Selection of Electro-Hydraulic Cutting Angle Setting with Read-Out, Pre-Selection of Cutting Length ...more