151 - 198 of 198 listings
64" x 12" McKay, slitting line, 100,000 lb., 1970
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Mckay
Year: 1970
Material: Hr, Cr Steel, Shear Strength: 60,000 PSI, Width: 64" (66" Untrimmed), Thickness: 0.065" To 0.500" (Edge Trim only on 0.625"), Coil Size:, I.D.: 24" To 30" Entry, 30" Exit, O.D.: 90" Entry and Exit, Coil Weight: 100,000 Lbs. Max., Line Direction: Left to Right, Line Speed: Low - 30 FPM to 150 FPM, High - 90 ...more
64.75" Pro-Eco, tension level / slitting line, 50000 lb., 36"-103" OD
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Pro-Eco
64.75" x 50,000# Pro Eco Tension Level / Slitting Line, -Materials: Aluminum Alloys, -Incoming Coil Sizes:, Coil Outside Diameter: 36" Min - 103" Max., Coil Weight: 50,000 lbs. Max., Coil Width Before Slit: 29" Min. - 64.750" Max., Coil Width After Slit: 28" Min. - 62.50" Max., -Width Tolerances:, 1/2 Comm Tolerance ...more
70" x 7" Kampf hi-speed light gage slitting line, 40000 lb.
Manufacturing Improvement | Miamisburg, OH
Category: Slitting Lines
Seller: Manufacturing Improvement
Location: Miamisburg, OH
Mfr: Kampf
2000 Kampf Slitting line, This German built Light gage aluminum Slitting line was built in 2000, Idled in 2012, Moved and reinstalled in 2017 By The manufacturer supervision., This line is designed to run 40,000# coils of Aluminum from.002" to.015" at 2600 FPM., It has a prep Station, a ready stand, Loading ...more
JUST ADDED!
72" x .015" -.135" Stamco Single Loop Slitting Line, 65,000 lbs, 90,000 psi, 36-80" outside dimension, 20-24" ID, 8" arbor, 500/1000 FPM, 1992
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Stamco
Year: 1992
, Manufacturer: Stamco, Material: CRS, HRPO, Hot Dip Galv, Electro Galv, Pre-Painted, Thickness Range:.015” –.135”, Shear Strength: 40,000 – 90,000 PSI, Yield Strength: 35,000 – 90,000 PSI, Max Coil Width: 72” (74” Untrimmed), Min Coil Width: 12”, Max Coil Weight: 65,000 ...more
JUST ADDED!
72" x .054" -.375" Pro-Eco, Slitting Line Components, 80,000 lbs, 80"-84" outside dimension, 16"-30" ID, 10.5" arbor, 150/500 FPM, RL, 1999
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Pro-Eco
Year: 1999
Line : Coil Width Thickness Range:.054" -.500" @ 48".054" -.375" @ 72" Coil O.D.: Entry: 84" Maximum Exit: 80" Maximum Coil I.D.: Entry: 16" - 30" Exit: 24" or 30" Line Speed: Line Includes: Entry Coil Car, Above Floor 80,000 Lbs. 72" Wide 72" O.D. Coils Self Contained Hydraulics Coil Entry Ramp Uncoiler Cone Type ...more
Get email updates for newly added Slitting Lines
Slitting Lines (also known as slitting systems) are production lines used to cut wide coils of material, such as metal or plastic, into narrower strips with precision. These lines typically include decoilers, slitters, and recoilers to streamline the process. Commonly used in industries like metal fabrication, automotive, and manufacturing, they are ideal for high-volume operations requiring consistent strip dimensions. Slitting lines are essential for efficient, large-scale material processing.
JUST ADDED!
72" x .06" -.500" Delta Brands, Dual Injector Head Slitting Line, 60000 lbs, 60k/75k PSI, 11" arbor, 36"-84" outside dimension, 20"-30" ID, 150/300 FPM, updates 2014 & 2019, orig 1992
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Delta
Thickness Range:.500" - 060", Coil Capacity: 60,000#, Yield Strength: 60,000 PSI, Tensile Strength: 75,000 PSI, Arbor size 11", Coil Width Range: 74" - 20", Coil OD Max: 84" Coil OD Min: 36", Coil ID Entry: 20" - 30", Coil ID Exit: 24" - 30", Line Speed Bare Drum: 150 / 300 FPM, New ABB Digital Drives in 2014, Rebuilt ...more
72" x .105" Red Bud #SL572-140, slitter head
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Red Bud
Model: SL572-140
Model Number - SL572-140, Serial Number - SLJ88-M0225, Width - 3" to 72", Thickness.020" to.105", Top and bottom hydraulic driven arbors, Five sets of slitter knives, Motorized knife adjustment, Rubber spacers.
72" x .135" Bradbury, Slitting Line, 40,000 Lb., 20-24" ID, 72" outside dimension, R-L, 1987
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Bradbury
Year: 1987
, Width Capacity: 72", Gauge Range:.018" -.135", Min/Max ID: 20" - 24", Max OD: 72", Weight Capacity: 40,000 Lbs., Line Direction : Right to Left, Line Includes: Coil Car, 53" Wide Bed Uncoiler 70" Wide x 40,000 Lbs. Attached Holddown AC Feed Up Air Clutch Slide Base 14" Shaft 20/24" Hydraulic Drum Peeler Table Pinch ...more
72" x .157" Alcos, Double Loop Slitting & Banding Line, Dual Head, 60000 lbs., 20-24" ID, 8" arbor, 400/1000 FPM, new
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Alcos
, Manufacturer: Altek, Width: 72”, Thickness Range:.015”–.157”, Coil Weight: 60,000 Lb., Coil Width Range: 18”–72”, Coil ID Entry: 20”–24” Expandable, Coil ID Exit: 20” (24” with saddles), Coil OD Max: 72”, Arbor Size: 8”, Line Speed: ...more
JUST ADDED!
72" x .187" Chicago #Maxisota Slitting Line with Two Injector Heads and Braner Turret Stacker Banding Line. 60000 lb.
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Chicago
Model: MAXISOTA
Thickness Range:.010” -.187” Cutting Capacity: 8 Cuts.187” Line Speed: 0 to 1000 FPM, Coil OD: 84" Entry Coil ID: 20” - 24” Exit Coil ID: 20” & 24” Diameter Sleeve Drums, Max Material Width: 74" Entry & 72" Exit, Material: Carbon CRCQ, HR, HRP&O, Stainless: 300 & ...more
JUST ADDED!
72" x .187" Chicago Triple Injector Head Loop Slitting Line with Braner Banding Line, 50000 lb.
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Chicago
Line Direction: Left to Right Thickness Range:.187" -.010" Max Coil Width: 72" Entry Coil ID: 20" - 24" Exit Coil ID: 20" & 24" Coil OD: 72" Line Speed: 1000 FPM Complete Line With: Coiltech L-Type Coil Car Entry 4 Arm Turnstile Entry L-Type Coil Car Paper Winder Mandrel Uncoiler with 4 Leaf Hydraulic Expansion ...more
72" x .187" Chicago Slitting Line, 60000 lb., w/ Two Injector Heads and Banding Line, 1000 FPM, AB PLC, upgrade 2025, 2017
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Chicago
Year: 2017
, Manufacturer: Chicago, Thickness Range:.016” to.187”, Cutting Capacity: 8 Cuts At.187”, Line Speed: 0 to 1000 FPM, Entry Coil ID: 20” to 24”, Exit Coil ID: 20” and 24” Diameter Sleeve Drums, Complete Line Includes:, Entry Turnstile:, Four Arm, Power Rotation, Entry Coil ...more
72" x .187" Paxson, loop slitting line, 50000 lb., 2 slitting heads, driven slitter
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Paxson
Make: Paxson, Material Width: 12" - 72" (Uncoiler 60"), Material Width:.010" -.187", Coil Weight: 50,000Lb, Coil ID: 20" - 24", Coil OD: 72", Speed: 500 /1000 fpm, Direction: Right to Left, Material Strength: 40,000 yield / 50,000 psi shear, Material: CR, HR, Galvanized, Entry Transfer Cart, Mechanical Traverse, Entry ...more
72" x .187" Paxson, slitting line, 60000 lb., 20"-24" ID, 72" OA, Entry Transfer Cart
G-2000 | Toledo, OH
Category: Slitting Lines
Seller: G-2000
Location: Toledo, OH
Mfr: Paxson
, Make: Paxson, Material Width: 12" - 72" (Uncoiler 60"), Material Width:.010" -.187", Coil Weight: 50,000Lb, Coil ID: 20" - 24", Coil OD: 72", Speed: 500 /1000 fpm, Direction: Right to Left, Material Strength: 40,000 yield / 50,000 psi shear, Material: CR, HR, Galvanized, Line Includes:, Entry Transfer Cart ...more
72" x .187" Paxson, slitting line, 60000 lb., R to L, knifes & tooling, 1970' s, updated controls 2000' s
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Paxson
Make: Paxson, Type: Looping Line, Year: 70s / Updated Controls: 2000s, Material Width: 12" - 72", Material Thickness:.020" -.187", Coil Weight: 60,000Lb, Coil ID: 20" - 24", Coil OD: 72", Direction: Right to Left, Entry Coil Car, Floor Standing Design, Hydraulic Lift and Traverse, Cone Type Uncoiler, Pneumatic Clutch ...more
72" x .187" Universal slitting line, 20000 lb., L to R, entry floor standing coil car, L-type dsgn
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Universal
Material Width: 12" - 72", Material Thickness:.015" -.187", Coil Weight: 20,000Lb, Coil ID: 20", Coil OD: 72", Direction: Left to Right, Entry Floor Standing Coil Car, L-Type Design, Hydraulic Lift & Traverse, Mandrel Uncoiler, Powered Hold-Down Roll, Hydraulic Expansion, Air Cooling Brake, Sliding Base, Hydraulic ...more
72" x .25" to .017" x 60000 lb. Pro-Eco, 2 heads, loop type w/banding line
American Steel Products Co | Toledo, OH
Category: Slitting Lines
Seller: American Steel Products Co
Location: Toledo, OH
Mfr: Pro-Eco
72" x .25" Pro-Eco, single loop injector head slitting, 70000 lb., R to L, 2004
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pro-Eco
Year: 2004
, MANUFACTURER - PRO-ECO, YEAR - 2004, LINE DIRECTION - RIGHT TO LEFT, UNCOILING DIRECTION - OVERWIND, RECOILING DIRECTION - OVERWIND OR UNDERWIND, MATERIALS - COLD ROLLED AND HOT ROLLED STEEL (PICKLED OR BLACK), THICKNESS -.010" (0.25 mm) MIN.,.250" (6.35 mm) MAX., COIL WIDTH - 72" (1,829 mm) MAX., COIL WEIGHT - ...more
72" x .25" Production Machinery, Slitting Line, 60000 LBS., partial rebuild
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Production Machinery
, Width Capacity: 72", Weight Capacity: 70,000 Lbs., Gauge Range:.040" -.250", Line Direction: Right to Left, Line Includes:, Uncoiler, Cones, Entry Unit, -Peeler/Pinch/Crop Shear, Slitter Head, (2) Heads, Scrap Winders (2), Pit Carryover Table, Tension Stand, Recoiler, Exit Coil Car, *Mechanically Rebuilt, *Currently ...more
72" x .375" Paxson, loop slitting line, 50000 lb.
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Paxson
Make: Paxson, Material Width: 12" - 72", Weight Capacity: 50,000Lb, Thickness:.050" -.375", Coil ID: 20" - 30", Coil OD: 72", Line Speed: 850 feet per minute, Direction: Right to Left, Entry L-Type Coil Car, Floor Standing Design, Hydraulic Lift & Traverse, Self Contained Hydraulics, Mandrel Uncoiler, Powered ...more
72" x .5" Braner slitting line, 74" width, 76" OD, 20"-24" ID, 120-250 FPM
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Braner
Manufacturer - Braner, Year - 1996, Thickness Range:.500" -.060", Line Speed: 250 FPM High - 120 FPM Low, Max Coil Width: 74", Coil ID: 20" - 24", Coil OD: 76", Max Coil Weight - 70,000#, Cutting Capacity:, 4 Cuts @.500", 9 Cuts @.312", 15 Cuts @.250", 27 Cuts @.187", 40 Cuts @.125", Line Components:, Entry L-Type ...more
72" x 1/2" Pro-Eco, heavy gauge slitting line components, 69000 lb., R to L
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pro-Eco
Note: These slitting line components are inline components from, a pickling line. Certain additional components will need to be added to, complete this line and modify the components to operate as stand alone, slitting line., MANUFACTURER: PRO-ECO, YEAR - 1989, LINE DIRECTION - RIGHT to LEFT, MATERIALS - CARBON ...more
72 x .5 Pro-Eco, heavy duty roller type side guides, R to L
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pro-Eco
72" x .5" Stamco, slitting line with 2 heads, 60000 lb., 1800mm x 12.7mm, 36"-80" OD, Entry Coil ID: 20" - 30", Exit Coil ID: 24"
Galaxie Corporation | Wayne, MI
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Stamco
Strip Width: 20"-72" (508mm-1800mm), Strip Thickness:.075"-.500" (1.9mm-12.7mm), Coil ID: 20"-30" on entry, 24" on Exit (508mm-762mm on entry) (610mm on Exit), Coil OD: 36"-80" (914mm-2032mm), Max Coil Weight: 60,000#, Line Speed: 150 FPM (50 MPM), 4 Cuts of.375" at 80,000PSI, 4 ...more
JUST ADDED!
72" x 0.135" Stamco, Single Loop Slitting Line, L to R, 200 HP uncoiler, 125 HP slitter, 200 HP recoiler, 90,000 psi shear strength, 1000 FPM, 1992
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Stamco
Year: 1992
, MANUFACTURER - STAMCO, YEAR - 1992, LINE DIRECTION - LEFT to RIGHT (TURNSTILES LOAD AND UNLOAD ON DRIVE SIDE), MATERIALS - C.R.S, HRP&O, HOT DIP GALV., ELECTRO GALV., PRE-PAINTED, THICKNESS -.015" MIN.,.135" MAX., SHEAR STRENGTH - 40,000 PSI MIN., 90,000 PSI MAX., YIELD STRENGTH - 35,000 PSI MIN., 90,000 PSI MAX. ...more
72" x 0.187" Braner, Slitting Line, 50,000 lb, RL, 20-24" ID, 72" outside dimension
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Braner
Make: Braner, Material Width: 12" - 72", Material Thickness:.020" -.187", Coil Weight: 50,000Lb, Coil ID: 20" - 24", Coil OD: 72", Direction: R-L, Entry Turnstile, Powered Rotation, Entry L-Type Coil Car, Hydraulic Lift and Traverse, Mandrel Uncoiler, Powered Hold - Down Roll, Hydraulic Mandrel Expansion, Air Cooled ...more
72" x 8" Paxson, slitting line, 50000 lb., 20"-24" ID, 500/1000 fpm
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Paxson
, Make: Paxson, Material Width: 12" - 72" (Uncoiler 60"), Material Width:.010" -.187", Coil Weight: 50,000Lb, Coil ID: 20" - 24", Coil OD: 72", Speed: 500 /1000 fpm, Direction: Right to Left, Material Strength: 40,000 yield / 50,000 psi shear, Material: CR, HR, Galvanized, Line Includes:, Entry Transfer Cart ...more
72" x 9" Paxson Slitting Line, 60000 lb.
Met-Pro Machinery Inc | Detroit, MI
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Paxson
72" wide material, 60,000Lbs capacity, 20" ID, 72" OD, Left to Right Mode of Operation, Coil Car: L&M Equip. S/N-12415-1, 50,000 LBS max. Capacity, 44" Deck, 72" OD, 20" from bottom of "V" to Floor, Paxson Cone Uncoiler, Slide Bases, 57" from Floor to CenterLine of Cones, Whichita Brakes, one on each Mandrel ...more
72" x 9" Paxson, Slitting Line, driven head, 60000 lbs, 20-24" ID x 72" outside dimension, 1970
D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
Year: 1970
Driven Head Loop-Type Slitting Line, Coil Weight: 60,000 lbs., Coil Size: 20" to 24" ID x 72" OD, Line Direction: Left to Right, Year: 1960 - 1970's (Updated Controls), Consisting of the following;, -Entry Coil Car:, Above Ground "L" Type, Self-Contained Hydraulics, Electric Cable Reel, Pushbutton Control ...more
72" x 12" DBI, Slittine Line, 100000 lb., .035" - .500" Guage range, 20" - 32" ID, 80" outside dimension, 500 HP, 2006
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Dbi
Year: 2006
Gauge Range:.035" -.500" Coil I.D.: 20" - 32" Line Includes: Coil Car Uncoiler, Cone Type Holddown/Peeler Unit Flattener Shear Side Guides Pinch Rolls Slitter Head, Single Head 12" Arbors 500 HP, 1950 RPM, Variable Slitter Drive Shimless Tooling Pit Crossover Table Equalizer for Shape Control & Tension Passline ...more
72" Paxson #72-60SL, 60000 lb. capacity, 2 driven heads with shimless tooling coil car thru coil car
AMM Industries, LLC | Sylvania, OH
Category: Slitting Lines
Seller: AMM Industries, LLC
Location: Sylvania, OH
Mfr: Paxson
Model: 72-60SL
Manufacturer: Paxson, Model: 72-60 SL, Condition: Used - Good, Stock #: 1106, Status: For Sale, 60,000 LB Capacity, 2- Driven Heads W/ Shimless Tooling, Coil Car Through Coil Car, - Entry Coil Car, L-Shape Design, - Uncoiler, 20"-24" ID, Hydraulic Expansion & Slide Base, 66" Wide Holddown, Water Cooled Brake ...more
72" Slitting Line w/Automatic Tooling & Knife Setup, 55000 lb., .016" - .125" thickness, 20" - 72" Width, 32" - 78" outside dimension, 20" ID, L-R, 32 - 650 FPM, 2007
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Year: 2007
, Thickness Range:.016"-.125" (.4mm-3.2mm), Width Range: 20"-72", Max Coil Weight: 55,000# (25,000kg), Coil ID: 20" (508mm) with rubber sleeve 24" (608mm), Coil OD Range: 32"-78" (800mm-2000mm), Line Speed: 32-650ft/min (10-200m/min), Line Direction: Left to Right, Line Includes:, Coil Staging Area, Entry Pit Type ...more
75" x 0.625" Braner, Slitting Line, 90,0000 lbs., 20-24" ID coil, 76" outside dimension coil, 2009
VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Braner
Year: 2009
Manufacturer: Braner, Year: 2009, Max Coil Width: 75", Coil ID: 20" - 24", Coil OD: 76", Gauge Range:, Cut Capacity Chart - 90,000 PSI Shear Strength Material, Strip Thickness/inches Push Pull/High Gear Push Pull/Low Gear,.625 inches 3,.500 5,.375 3 9,.312 5 10,.250 8 11,.187 12 12,.150 15 15,.125 18 18, Cut Capacity ...more
78" x .23" Fimi, Loop Slitting Line W/ 2 Heads, 30 Ton, 30" entry ID, 24" exit ID, 86" outside dimension, 400 FPM, 1997
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Year: 1997
76" X 66,000# X 1/4" Fimi Slitting Line, Age: 1997, Thickness Range: 2mm - 6mm, Coil Capacity: 30 Metric Ton, Entry Coil ID: 610mm - 760mm (24" - 30"), Exit Coil ID: 508mm & 610mm (20" & 24"), Max Coil OD: 2200mm (86"), Line Speed: 60 - 120 Meters/Min (200 - 400 FPM), Thickness Cap. - 2.0mm - 6mm ...more
102" x .55" SMS slitting line components, 90000 lb.
Met-Pro Machinery Inc | Detroit, MI
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Sms
102" x.550" x 90,000lbs., MFG: SMS, Yr: Late 1990's, Gauge:.080" Min.-.550 Max., Material Width: 102" Max., Coil Weight: 90,000lbs. Max., Coil ID: 20" & 30", Coil OD: 40" Min.-72" Max., Line Speed(FPM): 45Max, Entry Coil Cart, Uncoiler, 90,000lbs. Max. Weight Capacity, Coil ID: 20" & 30", Coil OD: 40" Min.-72" ...more
114" Custom, panel edge trimmer/slitter
Universal Tube & Rollform | Perrysburg, OH
Category: Slitting Lines
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Custom
UTUBE NUMBER: 3153, MANUFACTURER: CUSTOM, Maximum Strip Width: 114″, Line Direction: Left to Right, Control Panel, Push Buttons, DURANT Counter, LOCATION:, Universal Warehouse, Perrysburg, Ohio, Searching for a Specific Machine? Our inventory is always changing. Contact us for help finding the machinery you ...more
117" Slitting Line
Peterson Machinery Sales | Casa Grande, AZ
Category: Slitting Lines
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Condition Used Stock Number 4134.
120" x 10" PM slitter heads
G-2000 | Toledo, OH
Category: Slitting Lines
Seller: G-2000
Location: Toledo, OH
Mfr: Pm
-(2) Removable Heads, -120" L x 10.00" Dia. Arbors, -Powered Outboard opening for Tooling change, -Pivoting Door Type Outboard, -Powered Double Eccentric Arbor Adjustment, -Less Pinion, Reducer and Main Motor Drive, -Heads are Tooled, but no extra Tooling, Machine Type.Slitters & Slitting Lines Manufacturer.PM ...more
Fisher #SM-1250-8, 1250" mm x 1" mm sheet slitting head, 2023
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Fisher
Model: SM-1250-8
Year: 2023
Number of Cuts: 8, Material Width: 1250mm, Maximum Material Thickness: 1mm, Motor: 1.1Kw, Power Supply 380V.
Talleres LEMU #RoboPlus-210/800, automatic slitter rewinder machine line, 2010
Global Machine Brokers LLC | Guilford, CT
Category: Slitting Lines
Seller: Global Machine Brokers LLC
Location: Guilford, CT
Mfr: Talleres Lemu
Model: ROBOPLUS-210/800
Year: 2010
2010 Talleres LEMU ROBOPLUS-210/800.
BMT #CSL1302 / #CSL1502, Coil Multi Slit & Cutting Line, 2 models, 4 mm x 6 mm x 10 Ton OR 6 mm x 10 mm 15 Ton, new
Bud's Machine Tools | Murray, UT
Category: Slitting Lines
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Bmt
Model: CSL1302
Overview, Type:Coil Slitting LinesManufacturer:BMTModel:Coil Multi Slit & Cutting LineCondition:Build To OrderStock #:1890Status:For Sale, Model Thickness (mm) Width (mm) Weight (ton) Slitting Pcs Stacking Line Speed, CSL1302 0.5 1.5 1300 4 6 10 5 Automatic 25 m / dk, CSL1502 0.5 1.5 1500 6 10 15 5 Automatic 25 m ...more
72" Delta slitting line, .020"-.250" thickness, 40000 lb., 20" ID, 72" OD, R to L, coil car, uncoiler
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Delta
Make: Delta, Material Width: 12" - 72", Material Thickness:.020" -.250", Coil Weight: 40,000Lb, Coil ID: 20", Coil OD: 72", Direction: Right to Left, Entry L-Type Coil Car, Hydraulic Lift and Traverse, Self Contained Hydraulics, Mandrel Uncoiler, Coil ID: 16" - 24", Sliding Base, Powered Hold - Down Roll, Feed Up ...more
48" Loopco, slitting line with 3 slititng heads, 30000 lb., .025"-.312" thickness, water cooled brake
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Loopco
, Thickness Range:.025"-.312" (36" Head for Heavier Gauges), Max Width: 48", Max Coil Weight: 30,000#, Min Cut Strip Width:.75", Complete with the Following Components:, Entry Coil Car, Uncoiler, Feed Up Drive, Wichita Water Cooled Brake, Peeler Hold Down Roll, Crop Shear, 3 Slitter Heads (2 x 48" Wide and 1 x 36" ...more
40000 lb. LoopCo, slitting line, 300/6000 FPM, 60" x0.135", 20-24" ID
Midwest Machinery LLC | Livonia, MI
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Loopco
Width: 60", Weight Capacity: 40,000#, Coil I.D. Entry: 20" - 24", Coil I.D. Exit: 20", Line Speed: 300 and 600 FPM, Line Direction: Left to Right, Loopco "L" Type Coil Car:, Self-Contained Hydraulic Power Unit, Hydraulic Motor Travel, Loopco Mandrel Uncoiler:, Hydraulic Expansion, Powered Overarm Holddown Roll ...more
JUST ADDED!
96" S & S Corrugated Paper Machinery #9875, Slitter/Scorer
HGR24 | Euclid, OH
Category: Slitting Lines
Seller: HGR24
Location: Euclid, OH
Mfr: S&s Corrugated Paper Machinery
Model: 9875
Inventory No. 0126-076-0003 Manufacturer S&s Corrugated Paper Machinery Model No. 9875 Name Slitter/scorer Arrival Date 02-11-2026 Dimensions L x W x H (inches) 125 x 80 x 53 Capacity 96" Weight (lb.) 8960 Category Fabrication Condition Used Available Quantity 1.
JUST ADDED!
Southwestern Industries, Slitter w/Decoiler, 2000
Machine Tool Technologies | Milwaukee, WI
Category: Slitting Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Southwestern Industries
Model: SWI
Year: 2000
Spec, SWI SWI, SWI slitter with decoiler Software Controller and electric updated in 2023, Brand – SWI, Type – Vertical Mills Year – 2000, Condition – Used – Good.
JUST ADDED!
Yoder, Slitting Line, 5 HP, 1730 RPM, Hydraulic Unit, 3/60/230/460 V.
HGR24 | Euclid, OH
Category: Slitting Lines
Seller: HGR24
Location: Euclid, OH
Mfr: Yoder
Inventory No. 0426-148-0001 Manufacturer Yoder Name Slitting Line Arrival Date 04-30-2026 Dimensions L x W x H (inches) 457 x 90 x 96 Electrical 3/60/230/460 Weight (lb.) 22775 Category Fabrication Condition Used Available Quantity 1 Serial No. Y4905-367 Item 13 A, 5 Hp, 1730 Rpm, Hydraulic Unit, Ir Air Dryer. (585#) ...more
BMT #SLT16, Coil Slitting Lines, 63" wide, 5 models, 20-25 Ton, 262-492 FPM, 80-150 m/min, new
Bud's Machine Tools | Murray, UT
Category: Slitting Lines
Seller: Bud's Machine Tools
Location: Murray, UT
Model: SLT16
Overview, Type:Coil Slitting LinesManufacturer:BMTModel:Coil Slitting LinesCondition:Build To OrderStatus:For Sale, With Our Continuously Renewing and Developing Design Studies of our R&D Team, By Increasing the Slitting Speed of Slitting Lines, High Capacity Works Can Be Done and It Enables the Operator to Work ...more
