51 - 100 of 302 listings
2" Welex #200-24-1, single screw extruder
Platinum Asset Services | Scarborough, ON
Category: Extruders and Extrusion Lines
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Welex
Model: 200-24-1
WELEX, 200 24-1, 2", SINGLE SCREW EXTRUDER, WELEX 200 24:-1.
2.16" Leistritz #ZSE-50-GG, counter rotating twin screw extruder, 44:1 L/D, 62 HP Baumuller DC motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE 50 GG
Year: 1997
55MM Leistritz ZSE 50 GG Counter-Rotating Twin Screw Extruder 300 RPM Screw Speed 44:1 L/D Ratio 10 Barrel Sections, Water-Cooled Barrel, Non-Vented 46KW(62HP) Baumuller DC Motor, 112 AMPS DOES NOT INCLUDE DC DRIVE MISSING HALF OF BARREL HEATER IN ZONE 7 10 Barrel Zones, 3 Die Zones Eurotherm 2208e Controllers -SOME ...more
2.36" B & P Process Equipment Ko-Kneader System #CK-60-12D, 12:1 L/D, barrel vertically split
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: B & P
Model: CK-60-12D
used-b&p process equipment ko-kneader system, model ck-60-12d. system consists of: b&p ko-kneader, 60mm screw diameter, 12:1 l/d, barrel vertically split. cored shaft with segmented screw elements and liners, barrels are water heated cooled. 75 hp dc-motor with drive. screw speed up to 500 rpm; brabender type ...more
2.36" Battenfeld Cincinnati #Techbex-1-60-25D, single screw extruder, 25:1 L/D ratio, air cooled, RKC CH402 temperature controllers, 2013
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Battenfeld
Model: TECHBEX 1-60-25D
Year: 2013
Used 60MM(2.36") Battenfeld Cincinnati Extruder, Model Techbex 1-60-25D Single Screw Extruder, 25:1 L/D Ratio, Air Cooled 15.56:1 Nord 6282A2 2XHF/4 Gearbox, 30HP Nord AC Motor With 200XH/4F Drive, 119 Screw RPM, 4 Barrel Zones, 7 Die Zones AMP Gauge, Speed POT RKC CH402 Temperature Controllers Brand New MPI MPC9610 ...more
2.36" Berstorff, co-rotating twin screw extruder, 34:1 L/D ratio, 500 RPM screw speed, 200 HP Reliance VXS AC Inverter Duty motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Berstorff
Model: ZE 60A
Year: 1997
"60MM Berstorff Co-Rotating Twin Screw Extruder, 34:1 L/D Ratio, 500 RPM Screw Speed 7 Barrel Zones, Vented At Barrel Zone 4 and 6 1 Screen Changer Zone Electrically Heated, Water Cooled 200 HP Reliance VXS AC Inverter Duty Motor S/N 90-2-E0.8765/97 Order Number 1242 HUT New In 1997 No Drive Or Temperature Control ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
2.36" Leistritz #ZSE-60-GL, Twin Screw Extruder, liquid cooled, 36:1 L/D, 150 HP, 9 zones, Side Stuffer, extra parts
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-GL
used leistritz zse-60 gl twin screw extruder 36:1 l/d, 150 hp, side stuffer, strand dies, screws & spares. with (9) modular barrel sections. 114 kw / 150 hp baumueller dc motor, 500 rpm max. screw speed, barrels are electrically heated and internally cored for liquid cooling. includes stand-alone electrical ...more
2.36" Leistritz #ZSE-60-GL-36D, twin screw extruder, 36:1 L/D, 121 KW Baumuller Shunt Wound DC motor, 10 zone Control panel w/ Eurotherm 2208 temperature ctrlrs
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE-60-GL-36D
Used 60MM Leistritz ZSE 60 GL-36D Twin Screw Extruder, 121KW(162 HP) Co-Rotating 500 RPM Screw, 36:1 L/D Ratio, 9 Barrel Segments, With 40 MM Side Feeder Vent In Zone 4, Side Feeder In Zone 5 10 Zone Control Panel With Eurotherm 2208 Temperature Controllers 121KW(162) HP Baumuller Shunt Wound DC Motor Allen Bradley DC ...more
2.4" Leistritz #ZSE-60-MAX, Co-Rotating twin screw extruder, 62" L, 400 RPM, 20:1 L/D, liquid cooled, Sinamics Control, w/ wheels & adj feet, 480 V., 3 phase
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAX
used leistritz 60mm zse maxx twin screw extruder, type zse60maxx-20d. (2) co-rotating screws approximately 2.44" diameter x 62" long. speed 400 rpm. approximate 20 to 1 l/d ratio. 4 barrel sections, 1 feed section. liquid heated and cooled. 4-cooling zones. screws driven by a 121kw (160hp), 1600 rpm motor thru a ...more
2.44" Maplan #DSK62, counter rotating conical twin screw extruder, 40 HP, 1990
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maplan
Model: DSK62
Year: 1990
Used 62mm Maplan Counter Rotating Conical Twin Screw Extruder, Model DSK 62 4 Barrel Zones, Oil Zone, 7 Die Zones with Eurotherm 808 Temperature Controllers 72:1 Dorstener NSDEN 160 So Gearbox 40 HP Emerson Motor, ABB DCS 800 DC Drive 1 HP Starve Feeder 460/3/60 - 200 AMP Disconnect 40.5" Centerline Vented Barrel - ...more
2.5" Bonnot, Single Screw Extruder, 48" long jacketed, 1978
Quantum Technology | Shippensburg, PA
Category: Extruders and Extrusion Lines
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Bonnot
Year: 1978
Item Dimensions - L X W X H - 78X36X56Item Weight-500lb1508AAExperience enhanced productivity with the Bonnot Single Screw Extruder, perfect for your manufacturing needs. This robust machine boasts a 2.5-inch diameter by 48-inch long screw, making it ideal for a variety of extrusion processes. The fully jacketed ...more
JUST ADDED!
2.5" Davis Standard #250SII, single screw extruder
Aucto | San Francisco, CA
Category: Extruders and Extrusion Lines
Seller: Aucto
Location: Spring Lake, MI
Mfr: Davis Standard
Model: 250SII
2.5" Davis Standard #25IN25, cold feed rubber extruder, 20:1 L/D, 17.26:1 G/B, 40 HP, 1994
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Model: 25IN25
Year: 1994
One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25, 20:1 L/D, 17.26:1 G/B ratio, Reliance 40 HP 1185 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, forced lube system, clutch driven roller feeder assembly, PFR power feed roll, adjustable scraper blade ...more
2.5" Davis Standard #25IN25, Thermatic Single Screw Extruder, Air Cooled, (4) Barrel Zones, 25:1 L/D, 3.5" x 3.5" Feed Throat, 40 HP, 1985
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 25IN25
Year: 1985
Used 2.5" Davis Standard Thermatic, Single Screw Extruder, Model 25IN25, 24:1 L/D Air Cooled, 4 Barrel Zones 3.5" x 3.5" Feed Throat Gear Reducer, Ratio 17.26:1 Hes 301 System, Dynisco UPR800 Melt Pressure Gauge, Newport Digital Screw RPM And Motor Amp Gauges Speed POT, Start/Stop Push Buttons, Alarm/Silence, Barrel ...more
2.5" Davis Standard #DS2.5MS, extruder, 24:1 L/D, Air Cooled, 40 HP DC motor, 1985
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS2.5MS
Year: 1985
Used 2.5" Davis Standard Extruder, 24:1 L/D, Air Cooled, 40 Hp DC Motor, Belt Driven (60Hp Gearbox Capacity, With 1.25 S.F.) 3 Barrel Zones, 2 Die Zones 42" Centerline Bardac DC Drive, PowerPLX 40/99 7.42/1 Gearbox Ratio 460/3/60, 106A Watlow Temperature Controllers, Mercury Relays, Amp Meter, RPM Gauge With Clamp And ...more
JUST ADDED!
2.5" Davis Standard #SB250, Super Blue Extruder, 24:1 L/D, 40 HP, Air-Cooled, 4 Barrel Zones, SSD Drive, Belt Driven, 2006
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: SB250
Year: 2006
Used 2.5" Davis Standard Extruder, Model SB250, 24:1 L/D Ratio, Air Cooled, SSD Drive 17.26:1 Gearbox Ratio, Belt Driven, 4 Barrel Zones, 2 Die Zone 40 Hp Reliance AC Motor, Dual Speed With Hopper Previously Running PVC Digital Amp And Screw Speed Readouts, Start/Stop, Speed Pot, (4) Eurotherm Temp Controllers, (2) ...more
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, mixing pins
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Mixing Pins 76" Overall Length.
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, Maddox mixer
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Maddox Mixer 76" Overall Length.
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, mixing pins
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Mixing Pins 76" Overall Length.
2.5" Gloucester #2522, single screw extruder, R2, 32:1 L/D, 72" centerline height, 10.73:1 gearbox ratio
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 2522
used-gloucester model 2522 r2 2.5" 32:1 l/d extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. gearbox has a reduction ratio of 10.73:1 and is direct driven by a 60 hp d/c motor with saftronics scr control. manual screen changer mounted ...more
2.5" Gloucester Engineering #25225R2, extruder, 32:1, electrically heated, air cooled, non-vented barrel
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Gloucester
Model: 25225R2
Year: 2011
Used Gloucester Engineering Extruder 2.5", 32:1. Electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor ...more
2.5" Gloucester, single screw extruder, 32:1 L/D, (5) zone air cooled, vented barrel, 45" centerline height
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
used- gloucester 2.5" extruder 32:1 l/d five (5) zone air cooled and vented barrel at a 45" centerline height. top center feed throat. driven by a 50 hp a/c 1750/2100 rpm motor, includes 6 zone temperature control panel and 5-hole strand die.
2.5" NRM #2-5-24, Extruder, single head, electrically heated, 2.5" diameter x 24" L plastic extruder, 40 HP, 1725/2100 RPM, 500 V
Machinery & Equipment Co | Brisbane, CA
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Nrm
Model: 2-5-24
NRM extruder, 2.5" diameter x 24" long plastics extruder, model 2-5-24.1 PM IV RH-1CANVTD, single head carbon steel extruder. Unit is electrically heated, air cooled 4 zone non-vented barrel, water reed throat with hopper. Unit is driven by 40 hp, 500 volt, 1725/2100 rpm motor. Unit includes electrical panel, serial ...more
2-1/2" Royal cold feed extruder, 10:1 L/D, 40 HP 500 VDC motor, roller feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Royal
One (1) Used Royle 2.5" 60mm Cold Feed Rubber Extruder, Model 1A, 16:1 L/D, no motor, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
2.6" Gloucester #25225R2, single screw extruder, 32:1 L/D, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 25225R2
used- gloucester single screw extruder, model 25225r2. 2.5' diameter screw, 32:1 l/d. has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio 13.75:1 and is direct driven in ...more
2.83" Jiangsu Xinda #PSHJ72, twin screw extruder, 40:1 LD ratio, 2007
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Jiangsu-Lianguan
Model: PSHJ72
Year: 2007
Used 72mm Jiangsu Xinda Twin Screw Extruder, Model PSHJ72 40:1 LD Ratio, 10 Elements, Port in Zone 5, Vent In Zone 8 110 Kw Main Motor(147.5 Hp) With AC Drive 500 RPM Screw Speed Has Clampshell Style Barrel Opening 11 Temp Zone, 1 Die Zone, 1 Pressure Readout 2.2Kw Material Feeder With Control Panel New in 2007 ...more
JUST ADDED!
2.95" Cincinnati Milacron #Pak-3, single screw extruder, 24:1 L/D, 60 HP AC, 5 barrel zones, air-cooled, 2004
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: PAK 3
Year: 2004
Used 75MM(3.0") Cincinnati Milacron Single Screw Extruder 24:1 L/D Ratio 60 HP Reliance RPMAC AC Motor Siemens AC Drive 5 Barrel Zones Air-Cooled Barrel 6 Die Zones 55" Centerline Currently On Raised Base With V-Grove Casters Base Can Be Unbolted For 42.5" Centerline 460/3/60, 222 FLA, 300 Amp Disconnect Bunting ...more
JUST ADDED!
2.95" Krauss Maffei #KMD-75/32, Parallel Counter-Rotating Twin Screw Extruder, 32:1 L/D, 51 HP, Air-Cooled, 5 Zones, 480/3/60, 19302 hours, 2006
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Krauss Maffei
Model: KMD 75/32
Year: 2006
Used 75mm Krauss Maffei Parallel Counter Rotating Twin Screw Extruder, Model KMD 72/32, New in 2006 32:1 L/D Air Cooled Parallel Barrel, 5 Zones, Vented with Vacuum System 51hp Direct Drive Reliance AC Inverter Duty Motor, 1770 RPM, 62 Amps Allen-Bradley PowerFlex 700 Drives 9 Downstream Zones, Right to Left ...more
3" Davis Standard #DS-30, single screw extruder, 24:1 L/D, 7.42 gearbox ratio, air cooled, 40 HP AC, 1995
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS-30
Year: 1995
Used 3" Davis Standard Single Screw Extruder, Model DS-30, New in 1995 24:1 L/D Air Cooled Barrel, 4 Barrel Zone 7.42 Gearbox Ratio, 70hp Capacity with 1.25 Service Factor 40hp Baldor Vector AC Motor, 1180-3000rpm, With AC Drive Novus Temperature Controllers, 4 Barrel Zone, 3 Die Zone Screw Speed & Motor Load ...more
3" Hartig Extruder, 4 barrel zones, 24:1 L/D ratio, 75 HP, 3.25" L x 3" width feed throat, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Hartig
Year: 2019
Used 3" Hartig Extruder, 24:1, 75HP 4 Barrel Zones, 24:1 L/D Ratio Feed Throat: 3.25" L x 3" W 8 Downstream Zones Koellman Gearbox Size: PEZS 312 13.95:1 Ratio, Input RPM 1750, Output RPM 125 Rating: 93, Service Factor: 1.0 S/N: 71087348/10 75HP Marathon AC Motor, Blue Max, UVJ365THFS80366UL 460/3/60, 92A (42.5A @ ...more
3" Merritt extruder, 75 HP, vented belt driven w/14:1 gear box ratio, 125 RPM, 5 barrel zones
Machinery Network Inc | Encino, CA
Category: Extruders and Extrusion Lines
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Merritt
75 HP AC MOTOR, VENTED BELT DRIVEN WITH 14:1 GEAR BOX RATIO, 125 MAX RPM, 5 BARREL ZONES, ONE DIE ZONE, HOPPER,SPARE SCREW, BARREL CLAMP AND 14 HOLE STRAND DIE, 42" CENTER HEIGHT.
3" Merritt Davis, extruder w/ 1.25" co-extruder, 24:1 L/D ratio, air cooled, 60 HP AC motor
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Merritt
Used 3" Merritt Davis Extruder with 1.25" Merritt Co-Extruder 60 HP Motor AC Motor, NEW WEG AC Drive On Primary Extruder, 24:1 L/D Ratio, Air Cooled, 4 Barrel Zones, 22:1 Gear Ratio, 1.25" Pedestal Extruder With Tilt and Swing,5 Hp Ac Motor, 23.2:1 Gear Ratio, 12 Total Die Zones For the System, Both Machines With ...more
3" Miotto #EM03/60K, extruder, 60:30 L/D, Atos Control, hopper/feeder, 40 HP, 5 zone, 2004
Inter-Plant Sales | Hugo, MN
Category: Extruders and Extrusion Lines
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Miotto
Model: EM03/60K
Year: 2004
3" Welex #HS-3.0-40D-SV, Single Screw Extruder, water cooled, 40:1 L/D, 1520 RPM, 550 HP VFD Drive, Vented Barrel, 480 V., 2009
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Welex
Model: HS-3.0-40D-SV
Year: 2009
used welex hs 3.0 40d sv single screw extruder | 3" screw | 40:1 l/d | 1520 rpm | 550 hp vfd drive | vented barrel. 1520 rpm max. screw speed. electric heated, air cooled barrel. vented barrel. 57" barrel center line. 3" x 9" oversized water cooled feed throat. touch screen operator control. ...more
3.5" Cincinnati Milacron #Apex-3.5, side feed single screw extruder, 30:1 L/D ratio, 75 HP, water-cooled barrel, GE Fanuc PLC, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: APEX 3.5
Year: 1999
Used 3.5" Cincinnati Milacron Side Feed Single Screw Extruder Model Apex 3.5 30:1 L/D Ratio, 30:1 L/D Special Screw for MuCell Material Side Port Feed Throat for MuCell Material Entry Water-Cooled Barrel Belt Driven Through Flender SZNE-250 18.17:1 Gearbox Rated To 250 HP 6 Barrel Zones, 3 Die Zones ...more
3.5" Davis Standard, extruder, water cooled, 75 HP
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 350H III
Used 3.5" Davis Standard Extruder, Water Cooled, 75HP, Serial #F-8613.
3.5" Davis Standard #MV35IN35, extruder w/dual 1.25" co-extruders, 241:1 L/D, 2012
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Model: MV35IN35
Year: 2012
Stock#: 17744., Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012, Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/3/60 input power. 278 maximum amp load, A Davis standard model MV35IN35 3.5 24:1 L/D ...more
JUST ADDED!
3.5" Davis Standard #MVI-35IN35, extruder, 30:1 L/D, 150 HP AC, 5 barrel zones, air-cooled, Yaskawa A1000 VFD, 1998
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: MVI-35IN35
Year: 1998
Used 3.5" Davis Standard Mark VI Extruder, 30:1 L/D, 150 HP AC Motor Model: MVI-35IN35 Air Cooled Barrel, 5 Barrel Zones, 10 Die Zones 5.5" x 5" Feed Throat Centerline Height: 43" +/- 2" Screw Speed: 100 RPM 150 HP Baldor Reliance AC Motor 1755 RPM @ 60Hz 2000 RPM @ 68.5Hz 460 Volt, 160A DPG-FV Enclosure Davis ...more
3.5" Merritt/Davis Standard, single screw extruder, 5.5" x 5.5" feed throat, 24:1 L/D, air cooled barrel, 5 barrel zones, 2 die zones, 400 Amp GE circuit breaker w/ clamp & screw
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Used 3.5: Merritt/Davis Standard Single Screw Extruder Air Cooled Barrel, 24:1 L/D, 5 Barrel Zones, 2 Die Zones Feed Throat: 5.5" x 5.5" 26.3:1 Gear Ratio Speed: 66.5 RPM 75hp AC Motor/Drive Package Eurotherm 808 Temperature Controllers Speed POT, Start/Stop Button, Extruder AMP/RPM Digital Readouts, Dynisco Pressure ...more
3.5" Egan #Powerflight, extruder, 24/1 L/D ratio, 75 HP DC motor, 4 zones water cooled barrel
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Egan
Model: POWERFLIGHT
Used 3.5" Egan Powerflight Extruder, 24/1 L/D Ratio, 75hp DC Motor, 1750 RPM, With Saftronics Drive, Belt Driven, 4 Zones Water Cooled Barrel, 6 Barber Colman AT580 Temperature Controls, Mercury Relays, Rpm and Amp Gauge, Comes with Barrel Clamp, Hopper and Chrome Plated Screw, S/N 6544.
3.5" Gloucester #35250R2, single screw extruder, 32:1 L/D, 65" centerline height, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 35250R2
used- gloucester model 35250r2 3.5" diameter single screw extruder. 3.5" diameter screw, 32:1 l/d. has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio of 18.17:1 and is ...more
3.5" Gloucester #35250R2, single screw extruder, 32:1 L/D, 65" centerline height, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 35250R2
used- gloucester 3.5" single screw extruder, model 35250r2. 3.5" diameter screw, 32:1 l/d. having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio of 18.17:1 and is directly ...more
3.5" HPM #3.5TMC-24, non-vented extruder, electrically heated, air cooled, Witlock dryer, 1994
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Hpm
Model: 3.5TMC-24
Year: 1994
Used 3.5" 24/1 L/D HPM non-vented extruder. Model 3.5TMC-24, serial #93182. New 1994. Has electrically heated, air-cooled, barrel. Belt driven by a 75 hp brushless DC motor with controls. Flender gearbox type SZNE-250 with a reduction ratio of approximately 13.88/1 rated for up 157 hp. Includes unitized temperature ...more
3.5" HPM #3.5TMC-24, Single Screw Extruder, Air Cooled, 24:1 L/D, 75 HP, 460 V, 1994
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Hpm
Model: 3.5TMC-24
Year: 1994
Used 3.5" HPM Single Screw Extruder, Model 3.5TMC-24, 24:1 L/D, Air Cooled, 75hp, New in 1994 75hp Marathon Blue Max AC Motor 1780 RPM 221 (FT/LBS) Torque 460/3/60, 92 FLA Brand New WEG CFW500 AC VFD Flender Gearbox Type SZNE 250, S/N: D22-306-511-4-5 Ratio: 13.881:1 Driver:1838 RPM, Driven: 60 RPM With Screw & ...more
3.5" Merritt Davis #3.5, extruder, 24:1 L/D ratio, air-cooled barrel, 5 barrel zones, 13.9:1 gearbox ratio, 42" centerline
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Merritt
Model: 3.5
Used 3.5" Merritt Davis Model 3.5 Extruder with 1.5" Merritt Pedestal Extruder System Consists Of The Following Pieces: 3.5" Merritt Davis Extruder, 24:1 L/D Ratio, Air-Cooled Barrel, 5 Barrel Zones 13.9:1 Gearbox Ratio, Direct Driven, 75 HP Eurotherm DC Motor(2000/1150 RPM) With Reliance FlexPak DC Drive, 130 RPM ...more
3.5" Monsanto, 3.5" 90mm cold feed extruder, 16:1 L/D, 100 HP 500 VDC motor
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Monsanto
One (1) Used Monsanto 3.5" 90mm Cold Feed Extruder, 16:1 L/D, 100 HP 500 VDC motor, vacuum vented screw, forced lube system, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
3.5" NRM #Plastiscrew, cold feed, 12:1 L/D rubber extruder
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: Extruders and Extrusion Lines
Seller: DPA Machinery & Appraisals Llc
Location: Akron, OH
Mfr: Nrm
Model: PLASTISCREW
NRM 3 1/2" Plastiscrew cold feed rubber extruder with swing head in good condition. 24.88 to 1 reducer. 75HP DC motor.
3.5" NRM #Profilemaster, extruder, 24:1 L/D, 60 HP, 42.5" centerline, Eurotherm 808 controller
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Model: PROFILEMASTER
Used 3.5" NRM Profilemaster Extruder, S/N: 17749, Vintage: 09/1980 24:1 L/D, Belt Driven, 16.95.1 Ratio NRM Gearbox 42.5 Centerline Height, Round Feed Throat, Air-Cooled Barrel Clamp Barrel Flange, Screw and Hopper Included 60HP DC 1750 RPM Emerson Motor Fan Cooled Emerson Spectrum Drive, 100 Amps, Eurotherm 808 ...more
3.5" NRM, cold feed rubber extruder, 12:1 L/D, 24.9:1 gearbox ratio, 75 HP, 1750/2100 RPM
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 3.5" 90mm Cold Feed Rubber Extruder, 12:1 L/D, 24.9:1 G/B ratio, US Motors 75 HP DC, 1750/2100 RPM, 500 VDC motor, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, S/N T61335.
3.5" NRM, cold feed rubber extruder, 8:1 L/D, 20.64:1 gearbox ratio, 50 HP, 1750/2100 RPM
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) NRM 3.5" 90mm Cold Feed Rubber Extruder, 8:1 L/D, 20.64:1 gearbox ratio, Reliance 50 HP 1750/2100 RPM 500 VDC motor, straight delivery head, forced lube system, non-power feed roll type, S/N T37835.
3.5" NRM, cold feed rubber extruder, 12:1 L/D, 24.88:1 G/B, 75 HP, variable speed drive, 1997
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Year: 1997
One (1) NRM 3.5" 90mm Cold Feed Rubber Extruder, 12:1 L/D, 24.88:1 gearbox ratio, US Motors 75 HP 1750/2100 RPM 500 VDC motor, straight delivery head, forced lube system, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, date 8/1997, S/N T78035.
