CNC Lathes and Turning Centers

Seller: Perfection Industrial Sales

Location: Elk Grove Village, IL

Mfr: Okuma

Model: IMPACT-LU45M

Year: 2008

Swng over Bed 33"Swing Over Saddle 21.85Maximum Turning Diameter 25.59"Maximum Turning Length 118"X- Axis Travel Upper Turret:17.3"Z-Axis Travel Upper Turret:121.6"Spindle Hole 10.24"Spindle Speeds ___ to ___Spindle Nose A2-20Turrets (2)Turret Positions Upper:8, Lower: 10Tailstock Quill 5.12"Tailstock Taper MT ...more

Okuma #LB-10, CNC lathe, 8" chuck, 1.75" bore, 5.9" dia., 9.8" lgth, 12 turret, OSP5000L-G, 1987

MD Equipment Services LLC | Crooked River, OR

541-37... (Show) 541-377-8197

Seller: MD Equipment Services LLC

Location: Crooked River, OR

Mfr: Okuma

Model: LB-10

Year: 1987

OEM: Okuma Machinery Works Ltd. (Japan), Model No.: LB10, Serial No.: 6007.1334, Age (circa): 1987, Electrics: 220-440 Volt, 3 Phase, 60 Cycle, 53-27 Amps, Main Motor: 10 HP, s and :,.CNC Controls: OSP5000L-G,.Turret: 12 Stations,.Chuck Size: 8",.Spindle RPM: 6,000,.Spindle Bore: 1.75",.Max. Turning Length: ...more

Okuma #LB-35II, CNC lathe, 27" swing, 20" chuck, 6" bar, 18" turn diameter, 118" turn length, tailstock, 30 HP, OSP-P200L, 2010

Hillary Machinery LLC | Tulsa, OK

918-23... (Show) 918-236-4843

Seller: Hillary Machinery LLC

Location: Tulsa, OK

Mfr: Okuma

Model: LB-35II

Year: 2010

CHUCK SIZE (in) 20 20 BAR CAPACITY (in) 6 6 SWING OVER BED 27 27 MAX TURNING DIAMETER (in) 18 18 MAX TURNING LENGTH (in) 118 118 TAILSTOCK Yes Yes SPINDLE MOTOR HP 30 30 Control CNC (OSP-P200L) CNC (OSP-P200L).

Okuma #LB-35III, CNC lathe, 27.5" swing, 15" chuck, 3.54" hole, 36.2" centers, 18.11" dia., 33.46" lgth, JIS A2-8, 12 turret, 2016

Machinery Marketing International | Chicago, IL

Seller: Machinery Marketing International

Location: Chicago, IL

Mfr: Okuma

Model: LB-35III

Year: 2016

Swing over Bed: 27.56", Swing Over Carriage: 16.93", DISTANCE BETWEEN CENTERS: 36.22", Max. Turning Diameter: 18.11", Max. Turning Length: 33.46", X-Axis Travel: 12.9", Z-Axis Travel: 36.22", Spindle Nose: JIS A2-8, Spindle Speeds: 14 to 3,200 Rpm, Thru-Spindle Hole Dia: 3.54", Turret, Positions: 12, Rapid Traverse ...more

Okuma #LB-35III, CNC lathe, 27.5" swing, 15" chuck, 3.54" hole, 36.2" centers, 18.11" dia., 33.46" lgth, JIS A2-8, 12 turret, 2016

Machine Tool Bids | Chicago, IL

Seller: Machine Tool Bids

Location: Chicago, IL

Mfr: Okuma

Model: LB-35III

Year: 2016

MACHINE, Swing over Bed: 27.56", Swing Over Carriage: 16.93", DISTANCE BETWEEN CENTERS: 36.22", Max. Turning Diameter: 18.11", Max. Turning Length: 33.46", X-Axis Travel: 12.9", Z-Axis Travel: 36.22", Spindle Nose: JIS A2-8, Spindle Speeds: 14 to 3,200 Rpm, Thru-Spindle Hole Dia: 3.54" ...more

Get email updates for newly added CNC Lathes and Turning Centers

A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.

Okuma #LB-45-II, CNC Lathe, 33.8" Swing, 24" 3-Jaw Chuck, 10" Bore, 78.7" Turn length, 50 HP, 24-2800 RPM, 23657 hours, 1998

Machine Tool Bids | Chicago, IL

Seller: Machine Tool Bids

Location: Chicago, IL

Mfr: Okuma

Model: LB-45 II

Year: 1998

The Okuma LB45-II is a robust CNC horizontal lathe designed for heavy-duty turning operations. It offers a combination of power, precision, and versatility, making it suitable for machining large workpieces. Contact us today for more !, MACHINE, Spindle Bore: 5.12 inches, Swing over Bed: 33.8 inches, Swing Over ...more

4 Photos

Okuma #LB-45II, 33.8" swing, 24" chuck, 3-jaw, 10" bore, 78.7"lgth, A2-11, OSP-7000, 24-2800 RPM, 50 HP, chip conveyor, tailstock, 1998

Machinery Marketing International | Chicago, IL

Seller: Machinery Marketing International

Location: Chicago, IL

Mfr: Okuma

Model: LB-45II

Year: 1998

10-inch Spindle Bore| Chip Conveyor| 50HP Spindle Motor|, The Okuma LB45-II is a robust CNC horizontal lathe designed for heavy-duty turning operations. It offers a combination of power, precision, and versatility, making it suitable for machining large workpieces. Contact us today for more !, Spindle Bore: 5.12 ...more

4 Photos

Okuma #LB-3000-EX-II, CNC lathe, 22.8" swing, 16.14" dia., 19.69" lgth, 30 HP, 5000 RPM, LNS Quickload Servo 80" + bar feed, 2013

Silverlight CNC | Barrington, IL

847-79... (Show) 847-796-6687

Seller: Silverlight CNC

Location: Barrington, IL

Mfr: Okuma

Model: LB-3000-EX-II

Year: 2013

OKUMA LB3000 EX-II CNC Lathe, 2013 model, used condition. s: 22.83" swing, 19.69" machining length, 30 hp, max 5,000 RPM, 16.14" turning diameter. Ideal for precision manufacturing and efficient operations., Capacity, Swing: 13", Distance Between Chucks: 30", Spindle Bore: 4", Bar Capacity: 3.125" ...more

Okuma #LB-3000EX-II-MYW800, OSP-P300LA, Big Bore, Y-Axis, C-Axis, high Press Coolant, Main/Sub Spindle, 2016, #43938

Prestige Equipment Corp | Melville, NY

631-24... (Show) 631-249-5566

Seller: Prestige Equipment Corp

Location: Melville, NY

Mfr: Okuma

Model: LB-3000EX-II-MYW800

Year: 2016

Swing Over Bed 22.83" Swing Over Cross Slide 18.5" Maximum Cutting Diameter 13.39" Maximum Cutting Length 31.5" Distance Between Spindles 42.72" X-Axis Travel 10.24" Z-Axis Travel 39.76" Spindle Bore 3.59" Spindle Nose A2-8 Main Spindle Speed 4,200 RPM Main Spindle Motor 40 HP Sub Spindle Motor 15 HP Sub Spindle Speed ...more

Okuma #LB-3000EX-LI/800BB-MYM, CNC Turning Center, 2011

Universal Automatics | Richfield, OH

234-57... (Show) 234-571-1310

Seller: Universal Automatics

Location: Richfield, OH

Mfr: Okuma

Model: LB-3000EX-LI/800BB-MYM

Year: 2011

SWING OVER BED: 22.83", SWING OVER SADDLE: 18.5", MAX. TURNING DIAMETER: 13.39", MAX. TURNING LENGTH: 37.00, X-AXIS TRAVEL: 10.24", Y-AXIS TRAVEL: 4.72", Z-AXIS TRAVEL: 39", SPINDLE NOSE: A2-8, SPINDLE BORE 3.15, SPINDLE RANGE: 42-4,200 RPM, MILLING SPEED RANGE: 45 - 6,000 RPM, MAIN MOTOR: 30 HP, LIVE MILLING MOTOR: ...more

4 Photos

Okuma #LB-3000EX-M-C1000, CNC turning center with milling, OSP-0P200LA, 22.8" swing, 40.1" centers, 2011

Premier Equipment Inc | Altamonte Springs, FL

Seller: Premier Equipment Inc

Location: Altamonte Springs, FL

Mfr: Okuma

Model: LB-3000EX-M-C1000

Year: 2011

Okuma LB3000EXM/C-1000 CNC Turning Center with Milling (subject to buyer verification):Swing Over Bed: 22.83”Swing Over Saddle: 18.5”Distance Between Centers: 40.16”Max Turning Diameter: 13.39”Max. Turning Length: 39.37”X Axis Travel: 10.24”Z Axis Travel: 41.93”C Axis:.001 ...more

Okuma #LB-3000EX-MY950, 22" swing, 38" centers, 12-station turret,milling,C-Axis, 5000 RPM,OSP-P200LA, 2012, #43018

Prestige Equipment Corp | Melville, NY

631-24... (Show) 631-249-5566

Seller: Prestige Equipment Corp

Location: Melville, NY

Mfr: Okuma

Model: LB-3000EX-MY950

Year: 2012

Swing Over Bed: 22.83", Swing Over Carriage: 18.5", Max. Turing Diameter: 13.39", Distance Between Centers: 38.19", Maximum Cutting Length: 37.4", Main Spindle Speed: 45 - 5,000 RPM, Main Spindle Motor: 30 HP, Milling Spindle Speed: 45 - 6,000 RPM, Milling Spindle Motor: 9.5 HP, Approximate Machine Footprint: 91" x ...more

9 Photos Video

Okuma #LB-3000EXII-450-MYW, with Sub Spindle, 2020

Franke CNC, LLC | Germantown, WI

262-30... (Show) 262-302-3672

Seller: Franke CNC, LLC

Location: Germantown, WI

Mfr: Okuma

Model: LB-3000EXII-450-MYW

Year: 2020

Okuma #LB-3000EXII-850-MYW, with Sub Spindle, 2020

Franke CNC, LLC | Germantown, WI

262-30... (Show) 262-302-3672

Seller: Franke CNC, LLC

Location: Germantown, WI

Mfr: Okuma

Model: LB-3000EXII-850-MYW

Year: 2020

Okuma #LB-3000EXII-MYW/800, mulit-axis CNC turning center, OSP-P300LA, 22.8" swing, 31.5" centers, 2.6" bar, 2022

Premier Equipment Inc | Altamonte Springs, FL

Seller: Premier Equipment Inc

Location: Altamonte Springs, FL

Mfr: Okuma

Model: LB-3000EXII-MYW/800

Year: 2022

Okuma LB3000EXII-MYW x 800 Multi-Axis CNC Turning Center (subject to buyer verification):Swing Over Bed22.83”Swing Over Saddle18.5”Distance Between Centers31.5”Max Machining Diameter13.39”X Axis10.24”Z Axis33.00”Y Axis4.53” (+2.76” / -1.77”)Spindle NoseA2-6Thru ...more

Okuma #LH55, CNC Lathe, 43.3" swing, 24" chuck, 12.9" bar, OSP E100L, chip conveyor, tailstock, 2005

Revelation Machinery | Chicago, IL

816-33... (Show) 816-330-2138

Seller: Revelation Machinery

Location: Chicago, IL

Mfr: Okuma

Model: LH55

Year: 2005

Make: Okuma, Model: Okuma, Year: 2005, Machine Location: Upon Request, Bar Capacity: 12.9″, Chuck Size: 24″, Spindle Speed: 500 RPM, Spindle Motor: 60 HP, X Axis Travel: 26.57″, Z Axis Travel: 118″, Rapid Rate Z Axis: 394 IPM, Turret Tools: 8 Station, Rapid Rate X Axis: 360 IPM, Max Turning ...more

6 Photos

Okuma #LH55-N, CNC Lathe, 26" X, 158" Z, 43" swing, 4.13" spindle bore, A2-11, 60 HP, 1200 RPM, Fanuc OiTD

Toolquip Inc | Lebanon, OH

Seller: Toolquip Inc

Location: Lebanon, OH

Mfr: Okuma

Model: LH55-N

SWING OVER BED. 43", SWING OVER CROSS SLIDE. 26", MAXIMUM TURNING LENGHT. 157", X-AXIS TRAVEL. 26", Z-AXIS TRAVEL. 158", SPINDLE SPEEDS. 20 TO 1200 RPM, SPINDLE BORE. 4.13", SPINDLE NOSE. A2-11, SPINDLE DRIVE. 45 / 37 KW (60 / 49 HP), Quill Diameter. 5.91", Quill Stroke. 7.887", Quill Taper. #6 MT.

Okuma #LH55-N, Flat Bed CNC Lathe, 43.3" swing, 24" chuck, 118" work length, 12.99" bore, 2005

Premier Equipment Inc | Altamonte Springs, FL

Seller: Premier Equipment Inc

Location: Altamonte Springs, FL

Mfr: Okuma

Model: LH55-N

Year: 2005

Okuma LH55N Flat Bed CNC Lathe (subject to buyer verification):Swing Over Bed & Saddle43.3” & 26.97”Travel (X / Z axis): 26.57″ / 119.29″Max. Working Length118” (3 Meters)Spindle Motor60HPSpeeds 500 RPM?Spindle Bore12.99” (subject to buyer verification):OSP-E100L CNC ...more

Okuma #LH55-N, CNC lathe, Fanuc 0iTD, 43" x 157", retrofitted 2018

Abbott Machine Co | Alton, IL

618-46... (Show) 618-465-1898

Seller: Abbott Machine Co

Location: Alton, IL

Mfr: Okuma

Model: LH55-N

Okuma #LOC-650, 4" Axis Horizontal CNC Turning Center, 68" machining length, 40" swing, 25" turning diameter, 33" chuck, 14.7" bar, 60 HP, 500 RPM, OSP 200L CNC, 2011

Harris Machine Tools, Inc. | Houston, TX

713-46... (Show) 713-462-5800

Seller: Harris Machine Tools, Inc.

Location: Houston, TX

Mfr: Okuma

Model: LOC 650

Year: 2011

2011 OKUMA LOC 650, Swing. 31.5", Machining Length. 68.89", Chuck Size. 32", Power. 50 hp, Max RPM. 500 RPM, Weight. 50,000 LBS..

Okuma #LOC-650, 4-Axis CNC Multi-Axis Twin Turret Lathe, 40.5" swing, 25.59" turning diameter, 32" chuck, 22" bar, 60 HP, 500 RPM, tailstock, 2006

Harris Machine Tools, Inc. | Houston, TX

713-46... (Show) 713-462-5800

Seller: Harris Machine Tools, Inc.

Location: Houston, TX

Mfr: Okuma

Model: LOC 650

Year: 2006

CNC Control: yes, Type of CNC Control: OSP E100L CONTROL, # Axis: 4, Chuck Size: 32 inches, Swing: 40.55 inches, Turning Diameter: 25.59 inches, Bar Capacity: 22 inches, Spindle Bore: 22 inches, X Axis Travel: 12.99 / -5.51, 10.04 / -0.59, Z Axis Travel: 80.31", 39.96", Spindle Speed (RPM): 500, Main Motor: 60 HP ...more

Okuma #LT-10M, CNC Lathe, 15.7" swing, 8.27" turning diameter, 5.12" machining length, 6" chuck, 1.6" bar, 2.09" spindle bore, 10 HP, 6000 RPM, 12 tool, OSP 7000L control, live tooling, 1997

Toolquip Inc | Lebanon, OH

Seller: Toolquip Inc

Location: Lebanon, OH

Mfr: Okuma

Model: LT-10M

Year: 1997

MAX DIAMETER BAR CAPACITY. 1.6", MAX SWING OVER BED. 15.75", DISTANCE BETWEEN NOSES. 37.80", MAX TURNING DIAMETER. 8.27", MAX MACHINING LENGTH. 5.12", MAIN MOTOR. 10/7.5 HORSEPOWER, SPINDLE SPEED L/R. 50 - 6,000 RPM, NO OF SPINDLE SPEED RANGES. AUTO 2-STEP, VAC MOTOR WINDING CHANGEOVER, TOOLS. 12 + 12, DIAMETER OF OD ...more

Okuma #LT-200MY, CNC 4 Axis Lathe, 15.7" swing, 2" bar, 37.8" centers, Fully Rebuilt In 2017, 2005

Revelation Machinery | Chicago, IL

816-33... (Show) 816-330-2138

Seller: Revelation Machinery

Location: Chicago, IL

Mfr: Okuma

Model: LT-200MY

Year: 2005

Make: Okuma, Model: LT-200 MY, Year: 2005, Machine Location: Upon Request, Capacity –, Swing / Swing Over Cross Slide: 15.75″ / 12.2″, Maximum Cutting Diameter: 8.27″, Maximum Turning Length: 21.26″, Distance Between Spindle: 37.80″, Main Spindle, Speeds: 45 – 4,500 RPM ...more

Okuma #LT-300M, twin turret, live milling with sub spindle CNC turning center, OSP-P200L Control, 21.6" swing, 2" bar, 2007

Perfection Global | Elk Grove Village, IL

847-42... (Show) 847-427-3333

Seller: Perfection Global

Location: Elk Grove Village, IL

Mfr: Okuma

Model: LT-300M

Year: 2007

Maximum Swing: 21.65"Turning Diameter: 13.78"Distance Between Noses: 39.24"Bar Capacity Right and Left Spindles: 2"Upper Turret Positions: 12Lower Turret Positions: 12Spindle Speeds for Main & Sub: 380 - 5000 RPM, Okuma OSP-P200L CNC ControlLive MillingTwin Collet ChucksTwin TurretSub SpindleCoolant System with ...more

Okuma #LT-2000EX, dual turret lathe, OSP-P300LA Control, 6" chuck, 52mm bar, 8.27" turning diameter, 5.12" turning length, 2019

Absolute Machinery Corp | Worcester, MA

508-79... (Show) 508-792-4305

Seller: Absolute Machinery Corp

Location: Worcester, MA

Mfr: Okuma

Model: LT-2000EX

Year: 2019

Okuma LT2000-EX-2T2M, Big Bore A2, No tooling included, 22hp Upgrade, Auto Touchsetter, Bar feed interface (no Bar Feed), mfg 2019 demo machine sold June 2022 in service approx. 3 years CNC run time 6498 hours, Model: LT2000EX, Max Turning Diameter: 8.28 in, Max Swing: 15.75 in, Chuck Size L R: 8/6 in, Spindle Speed L ...more

Okuma #LT-3000EX, multi-axis CNC turning center, 21.6" swing, 2.5" bar, 13.78" dia., 7.88" lgth, A2-6, 16 turret, rigid tap, OSP-P300L, C-Axis, live tool, 2013

MachineStation | Lake Elsinore, CA

909-91... (Show) 909-919-9600

Seller: MachineStation

Location: Lake Elsinore, CA

Mfr: Okuma

Model: LT-3000EX

Year: 2013

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Okuma OSP-P300L CNC Control, 7,338 Hours Cutting ...more

Okuma #LU-15, CNC Lathe, 20.9" swing, 14.2" diameter x 23.6" L max, 4500 RPM, 30 HP, 10" chuck, OSP-7000L, tailstock, Chip Conv., 2002

Revelation Machinery | Chicago, IL

816-33... (Show) 816-330-2138

Seller: Revelation Machinery

Location: Chicago, IL

Mfr: Okuma

Model: LU-15

Year: 2002

Make: Okuma, Model: LU-15, Year: 2002, Machine Location: Texas, Swing Over Bed: 20.87″, Swing Over Carriage: 14.96″, Maximum Turning Diameter: 14.17″, Maximum Turning Length: ~23.62″, X-axis travel (upper slide): 10.23–10.24″, X-axis travel (lower slide): 5.51″, Z-axis travel ...more

Okuma #LU-15/2SC, 4-Axis CNC Lathe, 22" swing, 14.1" turning diameter, 29.2" machining length, 8" chuck, 2.2" bar, 30 HP, 4500 RPM, OSP U100L, tailstock, 2002

Toolquip Inc | Lebanon, OH

Seller: Toolquip Inc

Location: Lebanon, OH

Mfr: Okuma

Model: LU-15/2SC

Year: 2002

Used CNC Lathe, Swing: 22", Length: 29.2", 4 Axis, 30 hp, Max 4500 RPM, with OSP U100L control, 3 Jaw Chuck, and Chip Conveyor., 2002 OKUMA LU-15/2SC, Swing. 22", Machining Length. 29.2", # Axis. 4, Chuck Size. 8", Bar Capacity. 2.2", Power. 30 hp, Max RPM. 4,500 RPM, Turning Dia. 14.1", Tailstock. Yes, Live Tooling. ...more

Okuma #LU-45, 33" swing, 24" chuck, 10" bore, 10 station turret, follow rest, OSP-E100L, 2002

HTR Global Inc. | Houston, TX

281-37... (Show) 281-376-8950

Seller: HTR Global Inc.

Location: Houston, TX

Mfr: Okuma

Model: LU-45

Year: 2002

OKUMA LU45-N CNC LATHE, SPECIIFICATIONS:, Model LU45, CNC control OSP-E100L, Serial number/YOM 102386 /12 of 2002, Swing over bed 33", Max. turning diameter, XA/XB 23"/18”, Center distance 121”, Travels, Z axis 120", X-axis 26", Turret stations 12 upper/8 lower, Follow rest Yes, on lower turret, Spindle ...more

Okuma #LU-45, CNC lathe, 35.5" swing, 21" chuck, 3.5" bar, 25.98" diameter, 39.34" length, OSP7000L, chip conveyor, tailstock, tool holders, 1995

Machinery Marketing International | Chicago, IL

Seller: Machinery Marketing International

Location: Chicago, IL

Mfr: Okuma

Model: LU-45

Year: 1995

Used Okuma LU-45. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Okuma CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us today. ...more

10 Photos Video

Okuma #LU-45, CNC Lathe, 4-Axis, 35.5" Swing, 21" Chuck, 35" Bar Stock capacity, 39.34" Machining length, 60 HP, 2400 RPM, w/Tool Holders, 1995

Machine Tool Bids | Chicago, IL

Seller: Machine Tool Bids

Location: Chicago, IL

Mfr: Okuma

Model: LU-45

Year: 1995

Used 1995 Okuma LU-45. Machine Tool Bids offers plenty of CNC Lathes and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Okuma LU-45 or any of our machines., MACHINE, Number of Axis: 4, Spindle Speed: 2400 RPM, Spindle Motor (HP): 60 HP, Chuck Size (Inches): ...more

Okuma #LU-45-1500, 33" swing, 21" chuck, 78.7" centers, 25.98" dia., 78.74" lgth, 4.33" bore, OSP7000L, tailstock, dual turret, chip conveyor, 1996

Machnet | Santa Monica, CA

310-90... (Show) 310-909-2020

Seller: Machnet

Location: Santa Monica, CA

Mfr: Okuma

Model: LU-45-1500

Year: 1996

1996 Okuma LU-45-1500 CNC Lathe, Okuma LU-45/1500 Twin Turret CNC Turning Center, New: 1996, Swing Over Bed: 33.07", Swing Over Saddle: 21.85", Distance Between Centers: 78.74", Maximum Turning Diameter: 25.98", Maximum Work Length: 78.74", X-axis Travels: Upper Turret 17.32"/ Lower Turret: 12", Y-axis Travels: Upper ...more

Okuma #LU-45M, Multi-Axis Lathe, 33.4" swing, 4.3" bar, 22.83" turning diameter, 118.11" turning length, 2010

Premier Equipment Inc | Altamonte Springs, FL

Seller: Premier Equipment Inc

Location: Altamonte Springs, FL

Mfr: Okuma

Model: LU-45M

Year: 2010

Okuma LU45-M Multi-Axis Lathe / LU-45M, Max. Swing Over Bed: 33.46″, Max. Turning Diameter: 22.83″, Max. Turning Length: 118.11″, Bar Capacity: 4.33″, Thru Bore: 4.33″, Spindle Speed Range: 3000 RPM, Spindle Motor: 30 HP, Spindle Nose: A2-11, Number of Turrets: 1, Number of Tool ...more

Okuma #LU-45M, 35" swing, 118" centers, lv. milling, C-Axis, 10" bore, tailstock, prog steady, boring bar, OSP-200L, #43991

Prestige Equipment Corp | Melville, NY

631-24... (Show) 631-249-5566

Seller: Prestige Equipment Corp

Location: Melville, NY

Mfr: Okuma

Model: LU-45M

Year: 2009

Swing Over Way Covers 35.55" Maximum Turning Diameter 25.98" Maximum Turning Length 102.36" Distance Between Centers 118.11" Bar Capacity 5.12" Spindle Drive Motor, Main 60 HP Milling Spindle Speed, Maximum 2000 RPM C-Axis Indexing.001 Degrees Live Milling Yes, Okuma OSP-P200L CNC Control (2) 25" 3-Jaw Hydraulic ...more

Okuma #LU-45N, CNC Universal Long Bed 4-Axis Lathe w/Milling, 33" swing, 78.7" centers, 24" chuck, 25.6" turning diameter, 78.74" machining length, 2002

Premier Equipment Inc | Altamonte Springs, FL

Seller: Premier Equipment Inc

Location: Altamonte Springs, FL

Mfr: Okuma

Model: LU-45N

Year: 2002

OKUMA LU45M/2000 CNC UNIVERSAL LONG BED 4 AXIS LATHE WITH MILLING, Swing Over Bed 33.07″, Turning Diameter, Shaft Diameter 25.6″, 21.8″, Machining Length 78.74″, Distance Between Centers 78.74″, Chuck Size 1, 2 24″, Spindle Nose 1, 2 A2 -11, Spindle Bore Diameter 1, 2 5.12″ ...more

Okuma #LU-400/2SC650, 4-Axis CNC lathe, 25.5" swing, 26.5" centers, 3.1"/4.33" bar, 2006

Harris Machine Tools, Inc. | Houston, TX

713-46... (Show) 713-462-5800

Seller: Harris Machine Tools, Inc.

Location: Houston, TX

Mfr: Okuma

Model: LU-400/2SC650

Year: 2006

Capacity: Max Turning Diameter: 16.54″ Max Turning Length: 25.59″ Max Bar Capacity: 3.15/4.33″? Max Swing over bed: 25.59″ Max Swing over carriage: 16.54″ Distance between Centers:26.59″ Max Weight between Centers: 1320 lbs Travels: X Axis Travel Upper: 11.73″ X Axis Travel ...more

Okuma #LU-3000 V8CAM, 4-Axis CNC Lathe, 19" swing, 2.4" bore, 6.3" diameter, 18.9" length, 6000 RPM, A2-6, OSP-E100L, 2004

Wisconsin Metalworking Machinery | Waukesha, WI

262-54... (Show) 262-548-6080

Seller: Wisconsin Metalworking Machinery

Location: Waukesha, WI

Mfr: Okuma

Model: LU-3000

Year: 2004

, MANUFACTURER. OKUMA, MODEL. LU300 V8CAM, SERIAL NUMBER. 111793, AGE. 2004, SWING. 19.69", MAX. TURNING DIAMETER. 6.30", MAX. WORK LENGTH. 18.9", MAX. WORK PIECE WEIGHT. 265 LBS, CONTROL. OSP-E100L, SPINDLE SPEED. 50-6000 RPM, NOSE. A2-6, BORE DIAMETER. 2.44", TURRETS. UPPER AND LOWER, TRAVELS XA & XB. 3.94" ...more

6 Photos

JUST ADDED!

Okuma #LU-35-2SC/850, CNC universal lathe, 29.1" swing, 18" chuck, 3-jaw, 3" bar, 33.4" centers, 21.65" dia., 33.46" lgth, 4-Axis, OSP P100L, 2002

Used CNC LLC | Huntley, IL

224-53... (Show) 224-537-0982

Seller: Used CNC LLC

Location: Huntley, IL

Mfr: Okuma

Model: LU-35-2SC/850

Year: 2002

OKUMA LU 35 2SC / 850 CNC 4 AXIS UNIVERSAL LATHE, 2002 model, used. s 18" chuck, max spindle speed of 3200 RPM, and 50 HP. OKUMA OSP P100L CNC Control and chip conveyor. Machine weight: 20,800 lbs., Swing Over Bed: 29.13", Turning Diameter, Shaft Diameter: 18.90", Machining Length: 0, Distance Between Centers: 0 ...more

Okuma #LU-4000EXMY-2SCx650, CNC lathe, OSP-P300L Control, 650mm turning diameter, 2022

Premier Equipment Inc | Altamonte Springs, FL

Seller: Premier Equipment Inc

Location: Altamonte Springs, FL

Mfr: Okuma

Model: LU-4000EXMY-2SCX650

Year: 2022

2022 Okuma LU 4000 EX – MY 2SC650 CNC Lathe, MFG Date 09/2022, Hours Recorded 3/18/2025, Operating Hours 889, Cutting Hours 857, Spindle Hours 760, LU-4000-EX-MY-2SC/650 WITH OSP P300L CONTROL, Turning:, Max Turning Diameter: Ø650 mm, Max Work Length: 650 mm, Spindle Speed: 45-4200 min-1, Standard Power ...more

JUST ADDED!

Okuma #LU45-M, CNC turning center, 33" swing, 27" chuck, 3-jaw, 5.12" bore, 49.2" centers, A2-11, twin turret, live tooling, OSP-U100L, 2001

Machine Tool Bids | Chicago, IL

Seller: Machine Tool Bids

Location: Chicago, IL

Mfr: Okuma

Model: LU45-M

Year: 2001

The Okuma LU45-M CNC Lathe (2001) with OSP-U100L control is a powerful heavy-duty turning center engineered for efficient machining of mid- to large-sized cylindrical components. Featuring simultaneous 4-axis machining with upper and lower turrets, plus live tooling for drilling, tapping, and milling, it enables ...more

6 Photos

JUST ADDED!

Okuma #LU45-M, CNC lathe, 33" swing, 27" chuck, 3-jaw, 5.12" bore, 49.2" centers, 12-2800 RPM, 50 HP, OSP-U100L, upper/lower turret, live tooling, 2001

Machinery Marketing International | Chicago, IL

Seller: Machinery Marketing International

Location: Chicago, IL

Mfr: Okuma

Model: LU45-M

Year: 2001

Milling| Live Tooling, The Okuma LU45-M CNC Lathe (2001) with OSP-U100L control is a powerful heavy-duty turning center engineered for efficient machining of mid- to large-sized cylindrical components. Featuring simultaneous 4-axis machining with upper and lower turrets, plus live tooling for drilling, tapping, and ...more

5 Photos

Okuma #MacTurn-30, multi Axis CNC lathe, U100L Control, 21.6" swing, 12" chuck, 2001

Asset Exchange Corporation | Elk Grove Village, IL

773-86... (Show) 773-866-9600

Seller: Asset Exchange Corporation

Location: Elk Grove Village, IL

Mfr: Okuma

Model: MACTURN-30

Year: 2001

Overview, Type: Lathes CNC 5 Axis or More Manufacturer: MACTURN 30 Model: MACTURN 30 Year: 2001 Stock #: 92696 Status: For Sale Country: United States, ImperialMetric# Axis 5 5 Swing 21.65" 549.91 mm Machining Length 39.37" 1,000 mm Chuck Size 12" 304.8 mm Power 20 hp 14.9 kW Max RPM 4,500 RPM 4,500 RPM ...more

Okuma #MacTurn-250, CNC Lathe, 9-axis functionality, 21.6" swing, 14.57" turning diameter, 39.37" work length, 8" chuck, 2.7" bar, 30 HP, 5000 RPM, 2005

Toolquip Inc | Lebanon, OH

Seller: Toolquip Inc

Location: Lebanon, OH

Mfr: Okuma

Model: MACTURN-250

Year: 2005

CNC Lathe. 9-axis functionality, 21.65" swing, 30 hp, OSP-P100L Control, ATC, Renishaw Gauging. Used condition., Spindle Bore Diameter 3.15", Bar Diameter Capacity 2.75", Swing Over Bed, Maximum 21.65", Swing Over Saddle 20.87", Work Diameter, Maximum 21.65", Work Length, Maximum 39.37", X-Axis Travel, XA Turret ...more

Okuma #MacTurn-250-2S/1000 Big Bore 5" Axis CNC turning center w/live milling, OSP-P100L Control, 2005

Mohawk Machinery Inc | Cincinnati, OH

513-77... (Show) 513-771-1952

Seller: Mohawk Machinery Inc

Location: CINCINNATI, OH

Mfr: Okuma

Model: MACTURN-250-2S/1000

Year: 2005

OKUMA "MACTURN 250-2S/1000" BIG-BORE 5-AXIS, CNC TURNING CENTER W/LIVE MILLING, New 2005, Serial No 116135, Model Macturn 250-2S/1000, OKUMA "MACTURN 250-2S/1000" BIG-BORE 5-AXIS, CNC TURNING CENTER W/LIVE MILLING, New 2005, Serial No 116135, Model Macturn 250-2S/1000, OSP-P100L CNC Control w/CRT, 44-Position ...more

10 Photos Video

Okuma #MacTurn-250BB-2S/1000, CNC turning center, 21.6" swing, 2.7" bar, 3.15" bore, A2-8, 30 ATC, OSP-P100L, live mill, 2005

Machinery Central | Louisville, KY

502-21... (Show) 502-219-7311

Seller: Machinery Central

Location: Cincinnati, OH

Mfr: Okuma

Model: MACTURN-250BB-2S/1000

Year: 2005

OKUMA "MACTURN 250-2S/1000" BIG-BORE 5-AXIS, CNC TURNING CENTER W/LIVE MILLING, New 2005, Serial No 116135, Model Macturn 250-2S/1000, OSP-P100L CNC Control w/CRT, 30-Position Automatic Tool Changer, 5-Axis Machine Design, 3.15" Spindle Bore - A2-8 Spindle Nose, Collet-Type Chuck w/Kitagawa Hydraulic Actuator ...more

10 Photos Video

Okuma #Macturn-250-2S/1000, 5" Axis CNC Turning Center, 21.7" swing, 39.4" L max, 5000 RPM, 30/20 HP, 3.15" Bore, Live Mill, tailstock, Chip Conv., 2005

Aucto | San Francisco, CA

844-60... (Show) 844-605-1425

Seller: Aucto

Location: Louisville, KY

Mfr: Okuma

Model: MACTURN-250-2S/1000

Year: 2005

THE OKUMA MACTURN 250-2S/1000 IS A BIG-BORE 5-AXIS CNC TURNING CENTER LIVE MILLING CAPABILITIES AND AN OSP-P100L CNC CONTROL. IT S A 30-POSITION AUTOMATIC TOOL CHANGER AND A 5-AXIS MACHINE DESIGN, INCLUDING 360-DEGREE C-AXIS ROTATION (0.001-DEGREE CONTROL ANGLE) AND A 210-DEGREE B-AXIS ANGLE (1-DEGREE INDEXING)., KEY ...more

JUST ADDED!

Okuma #Macturn-250W, CNC lathe, 20.8" swing, 8" chuck, 2" bar, 21.65" dia., 46.06" lgth, 30 HP, 5000 RPM, 5-Axis, OSP-P200L, 2008

Silverlight CNC | Barrington, IL

847-79... (Show) 847-796-6687

Seller: Silverlight CNC

Location: Barrington, IL

Mfr: Okuma

Model: MACTURN-250W

Year: 2008

For sale: 2008 OKUMA MACTURN 250W 5-axis CNC lathe. s include 20.87" swing, 46.06" machining length, and 30 hp with max 5,000 RPM. dual spindle, Okuma OSP-P200L control, parts catcher, and chip conveyor. Ideal for precision machining., 2008 OKUMA MACTURN 250W, # Axis. 5, Swing. 20.87", Machining Length. 46.06", Chuck ...more

Okuma #Multus-U3000-2SW/1500, CNC lathe, 59" centers, 25.59" turn diameter, OSP-P300S-H Control, 2013

Kaste Industrial Machine Sale | Enfield, CT

860-62... (Show) 860-623-5700

Seller: Kaste Industrial Machine Sale

Location: Enfield, CT

Mfr: Okuma

Model: MULTUS U3000 2SW/1500

Year: 2015

Maximum Turning Diameter: 25.59", Maximum Distance Between Centers: 59.05", Main Spindle Speed Range: 5,000 RPM, Milling Speeds: 12,000 RPM, Spindle Nose: A2-6, X-Axis Travel: 25.39", Y-Axis Travel: 9.84", Z-Axis Travel: 62.99", C-Axis Indexing: 0.001 Degree, B-Axis Indexing: -30 to +210/.001 Min Angle, Spindle Bore: ...more