151 - 200 of 209 listings
Nakamura Tome #SC-250, multi-axis CNC turning center, Fanuc 18iT, 2.5" bar, live tooling, 2004
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Nakamura
Model: SC-250
Year: 2004
Nakamura-Tome SC250 Multi-Axis CNC Turning Center (subject to buyer verification):CAPACITYMax Turning Diameter 11.81”Distance Between Spindles max 27” / min 11” with sub spindleMax Turning Length 19.68”Bar Capacity 2.56”AXIS TRAVELSlide travel (X) 7”Slide travel (Z) ...more
Nakamura Tome #Super-NTJX, multi-tasking CNC turning & milling center, Fanuc 31i-A, 2007
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Nakamura
Model: SUPER-NTJX
Year: 2007
Nakamura-Tome Super NTJX Multi-Tasking CNC Turning & Milling Center, (subject to buyer verification):, Capacity, Max. turning diameter / max. turning length 9.64” / 42.91”, Distance between spindles max. 50.78” / min. 8.26”, Bar capacity 2.5”, Axis travel, Slide travel (X1 / X2 / Z1 / ...more
Nakamura #Super-NTMX, CNC multi-axis CNC turning/milling center, Fanuc 31i-A5, 2013
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Nakamura
Model: SUPER-NTMX
Year: 2013
Nakamura-Tome Super NTMX CNC Multi-Axis CNC Turning/Milling Center (subject to buyer verification): CAPACITYBar Capacity ...more
JUST ADDED!
Nakamura Tome #Super-NTY3, CNC lathe, Fanuc 31iB, 12' Iemca Master 80 HF barfeed, 2012
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Nakamura
Model: SUPER-NTY3
Year: 2012
Nakamura Tome Super NTY3 CNC Lathe, Capacity 51mm 65mm (op.), Max. turning diameter 225mm, Standard turning diameter 150mm, Distance between spindles max. 970mm / min. 200mm, Max. turning length 685mm, Bar capacity 51mm 65mm, Chuck size 165mm (6″), Axis travel, Slide travel (X1 / X2 / X3) 160.5mm / 160.5mm / ...more
Nakamura #TMC-18, CNC Lathe, 10 HP, 4500 RPM, 8" Chuck, 2" Bar Capacity, 2-Axis, Fanuc 21-T Control, 15.7" Swing, 1998
AM Metalmaq Inc | Hialeah, FL
Category: CNC Lathes and Turning Centers
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Nakamura
Model: TMC-18
Year: 1998
Year of manufacture 1998, Swing over bed 16" (400mm), Max diameter turned 11.2" (280mm), Max turning length 12.2" (305mm), X-axis travel 10.1" (254mm), Z-axis travel 12" (300mm), Spindle nose type A2-6", Spindle bore 2.3" (58mm), Bar capacity 2" (51mm), Tool capacity 10, Spindle drive motor 15 HP (11.19 KW), Electrics ...more
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
Nakamura Tome #WT-150, multi-axis CNC lathe, 2" bar, 29.5" centers, 7.48" dia., 15.7" lgth, 12 turret, Fanuc 18i-TB, 2008
Generation Machine Tools | Sarasota, FL
Category: CNC Lathes and Turning Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Nakamura
Model: WT-150
Year: 2008
NAKAMURA TOME WT-150 Multi Axis CNC Lathe Y 2008’ #7992, NAKAMURA TOME WT-150 Multi Axis CNC Lathe Y 2008’ #7992, Reference #7992, Model # WT-150, Serial # M152008, Year of manufacture- 2007’ installed 2008’, X-axis travel- 6.2”, Y-axis travel- 1.377”, Z-axis travel- 18.299” ...more
Okuma #2SP-150H, 3-Axis, OSP-P300L, 13.7" swing, 3-jaw 8" chuck, 2" bar, with robot, with gantry load/unload, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: 2SP-150H
Year: 2015
OKUMA 2SP150H with Gantry Load/Unload, SWING 13.7″, MACHINING LENGTH 5.91″, # AXIS 3, CHUCK SIZE 6″, BAR CAPACITY 2″, POWER 15 hp, MAX RPM 4,500 RPM, TURNING DIA 8.68″, TAILSTOCK No, LIVE TOOLING No, SUB SPINDLE No, CONTROL CNC (Okuma OSP-P300L), DIMENSIONS 84.65″ x 72.83″ x ...more
Okuma #ES-L6, CNC Turning Center, 17.7" swing, 11.8" swing over cross slide, 11" centers, 12 tool, 2.36" bore, 2" bar, OSP-U10L cnc, chip conveyor, 2004
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Okuma
Model: ES-L6
Year: 2004
17.72” X 12.6” CNC Turning Center with Okuma OSP-U10L Control and Chip Conveyor., Max Swing Over Bed: 17.72”, Max Swing Over Cross Slide: 11.81”, Max Swing Over Carriage: 13.78”, Max Distance Between Centers: 11.02”, X - Axis: 6.1”, Z - Axis: 12.6”, Tool Positions: 12 ...more
Okuma #ESL8-IIM, CNC Turning Center, 17.7" swing, 8.3" diameter x 19.7" L max, 13.5 HP, 12 tool, OSP-P200L cnc, chip conveyor, 2008
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Okuma
Model: ESL8-IIM
Year: 2008
17.7” X 20.47” CNC Turning Center with Live Tooling, Okuma OSP-P200L Control and a Chip Conveyor., Swing: 17.7”, Max Turn Diameter: 8.26”, X - Axis Linear Travel: 6.1”, Max Turn Length: 19.69”, Max Z - Axis Travel: 20.47”, Main Spindle Motor Power: 13.5 HP, Turret: 12 Station ...more
Okuma #Genos-L200E-MY, multi-axis CNC lathe, OSP-P300L-R Control, 17.7" swing, 1.7" bar, 2013
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-200E-MY
Year: 2013
Okuma Genos L200EMY Multi-Axis CNC Lathe, (subject to buyer verification):, Swing Over Bed 17.72”, Swing Over Saddle 11.81”, Max. Turning Diameter 7.87”, Max Work Length 14.96”, Spindle Speed 75 ~ 3000 RPM, Main Motor (30 Min / Cont) 10HP / 7.5HP, Spindle Bore / Bar Capacity ...more
JUST ADDED!
Okuma #Genos-L250e, CNC lathe, OSP-P300L-R Control, 17.7" swing, 2" bar, 8" chuck, 12 station turret, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-250E
Year: 2015
Okuma Genos L-250E CNC Lathe (subject to buyer verification):Swing Over Bed17.72”Swing Over Saddle11.81”Max. Turning Diameter11.02”Max Mach Length19.69”X Axis Travel.79” + 5.51”Z Axis Travel20.47”Rapid Traverse Rated 787 / 984 IPMSpindle Speed75 ~ 3000 RPMSpindle NoseA2 ...more
Okuma #Genos-L300M, CNC lathe, OSP Control, 20.4" swing, parts catcher, milling, chip conveyor, 2013
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-300M
Year: 2013
Okuma Genos L300M Multi-Axis CNC Lathe:Swing Over Bed20.47”Swing Over Saddle6.69”Max. Turning Diameter11.81”Mach Length17.7”X Axis Travel9.05”Z Axis Travel20.47”Rapid Traverse Rated 787 / 984 IPMSpindle Speed25 ~ 3000 RPMSpindle NoseA2 – 8Spindle Bore / Bar ...more
Okuma #Genos-L300M, CNC Turning Center, 20.5" swing, 14.6" swing over cross slide, 20" centers, 11.8" diameter x 17.7" L max, 10" chuck, 12 tool, 3.15" bore, 3k RPM, 15 HP, 230 V., OSP P300L cnc, 2011
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Okuma
Model: GENOS-L-300M
Year: 2011
11.81" X 17.7" CNC Turning Center with Okuma OSP P300L CNC Control, LNS Move 2 Barfeeder, Live Tooling, Tool Setting Probe, Programmable Tailstock, 10" 3 - Jaw Power Chuck, 12 Position ID/OD Tool Turret, Chip Conveyor and Coolant System, Max Swing Over Slant Bed: 20.47", Max Swing Over Cross Slide: 14.57", Max ...more
Okuma #Genos-L300MYW, multi-axis CNC turning center, OSP-P300L-R Control, 20.4" swing, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-300MYW
Year: 2014
2014 Okuma Genos L300-MYW Multi-Axis CNC Turning CenterThis 2014 Okuma Genos L300-MYW is the best machine for multitasking machining. It can turn, mill, and work on the Y-axis at the same time, and it has a sub-spindle for complete part processing in one setup. This machine is great for small to medium-sized ...more
Okuma #Genos-L400, CNC lathe, 20.4" swing, 10" chuck, 3-jaw, 2.6" bar, 15.3" dia., 19.6" lgth, 22" centers, OSP P300L-R, 12 turret, A2-8, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-400
Year: 2014
OKUMA GENOS L400 CNC UNIVERSAL TURNING CENTER:CONTROL CNC (OSP P300L-R)WEIGHT 13000.00Swing Over Bed: 20.47″Turning Diameter, Shaft Diameter: 15.3″Machining Length: 19.6″Distance Between Centers: 22″Distance Between Spindles: 0Chuck Size 1, 2: 10″Spindle Nose 1, 2: A 2 – 8Spindle ...more
Okuma #Genos-L400, CNC Lathe, 20.4" swing, 10" chuck, 3.1" bar, 3000 RPM, 20 HP, OSP-P200L-R, 2013
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Okuma
Model: GENOS-L-400
Year: 2013
15.35” X 19.68” CNC Lathe with OSP-P200L-R CNC Control, A2-8 Spindle Nose, Chip Conveyor and All Available Manuals., Swing: 20.47”, Turning Diameter: 15.35”, Center Diameter: 19.68”, Chuck Size: 10”, Bar Capacity: 3.14”, X - Axis Travel: 8.66”, Z - Axis Travel: ...more
Okuma #Genos-L400E, CNC lathe, OSP-P200L Control, 20.4" swing, 42" centers, 2.7" bar, 10" chuck, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-400E
Year: 2011
Okuma Genos L400E CNC Lathe (subject to buyer verification):Swing Over Bed20.47”Swing Over Saddle11.81”Max. Turning Diameter15.35”Between Centers: 42”Spindle Speed25 ~ 3000 RPMSpindle Bore / Bar Capacity3.15″/ 2.76”Number of Tools12 Position Turret (subject to buyer ...more
JUST ADDED!
Okuma #LB-3000EX-M-C1000, CNC turning center with milling, OSP-0P200LA, 22.8" swing, 40.1" centers, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: LB-3000EX-M-C1000
Year: 2011
Okuma LB3000EXM/C-1000 CNC Turning Center with Milling (subject to buyer verification):Swing Over Bed: 22.83”Swing Over Saddle: 18.5”Distance Between Centers: 40.16”Max Turning Diameter: 13.39”Max. Turning Length: 39.37”X Axis Travel: 10.24”Z Axis Travel: 41.93”C Axis:.001 ...more
Okuma #LB-3000EXII-MYW/800, mulit-axis CNC turning center, OSP-P300LA, 22.8" swing, 31.5" centers, 2.6" bar, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: LB-3000EXII-MYW/800
Year: 2022
Okuma LB3000EXII-MYW x 800 Multi-Axis CNC Turning Center (subject to buyer verification):Swing Over Bed22.83”Swing Over Saddle18.5”Distance Between Centers31.5”Max Machining Diameter13.39”X Axis10.24”Z Axis33.00”Y Axis4.53” (+2.76” / -1.77”)Spindle NoseA2-6Thru ...more
Okuma #LH55-N, Flat Bed CNC Lathe, 43.3" swing, 24" chuck, 118" work length, 12.99" bore, 2005
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: LH55-N
Year: 2005
Okuma LH55N Flat Bed CNC Lathe (subject to buyer verification):Swing Over Bed & Saddle43.3” & 26.97”Travel (X / Z axis): 26.57″ / 119.29″Max. Working Length118” (3 Meters)Spindle Motor60HPSpeeds 500 RPM?Spindle Bore12.99” (subject to buyer verification):OSP-E100L CNC ...more
Okuma #LU-45M, Multi-Axis Lathe, 33.4" swing, 4.3" bar, 22.83" turning diameter, 118.11" turning length, 2010
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: LU-45M
Year: 2010
Okuma LU45-M Multi-Axis Lathe / LU-45M, Max. Swing Over Bed: 33.46″, Max. Turning Diameter: 22.83″, Max. Turning Length: 118.11″, Bar Capacity: 4.33″, Thru Bore: 4.33″, Spindle Speed Range: 3000 RPM, Spindle Motor: 30 HP, Spindle Nose: A2-11, Number of Turrets: 1, Number of Tool ...more
Okuma #LU-45N, CNC Universal Long Bed 4-Axis Lathe w/Milling, 33" swing, 78.7" centers, 24" chuck, 25.6" turning diameter, 78.74" machining length, 2002
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: LU-45N
Year: 2002
OKUMA LU45M/2000 CNC UNIVERSAL LONG BED 4 AXIS LATHE WITH MILLING, Swing Over Bed 33.07″, Turning Diameter, Shaft Diameter 25.6″, 21.8″, Machining Length 78.74″, Distance Between Centers 78.74″, Chuck Size 1, 2 24″, Spindle Nose 1, 2 A2 -11, Spindle Bore Diameter 1, 2 5.12″ ...more
Okuma #LU-4000EXMY-2SCx650, CNC lathe, OSP-P300L Control, 650mm turning diameter, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: LU-4000EXMY-2SCX650
Year: 2022
2022 Okuma LU 4000 EX – MY 2SC650 CNC Lathe, MFG Date 09/2022, Hours Recorded 3/18/2025, Operating Hours 889, Cutting Hours 857, Spindle Hours 760, LU-4000-EX-MY-2SC/650 WITH OSP P300L CONTROL, Turning:, Max Turning Diameter: Ø650 mm, Max Work Length: 650 mm, Spindle Speed: 45-4200 min-1, Standard Power ...more
Okuma #Multus-B250II-1SW/750-ARMROID, OSP-P300SA-H Control, 2.6" bar, 8"/6" chuck, CTS, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-B250II-1SW/750-ARMROID
Year: 2022
OKUMA MULTUS B250II-1SW/750 ARMROID, Product :, Chuck Size 8″, Max Diameter Bar Capacity 2.6″, Spindle Motor 30 / 20 HP, Spindle Speed 5000 RPM, Spindle Nose A2-6, Spindle Bore 3.15″, Tools 60, Sub Spindle Chuck Size 6″, Sub Spindle Motor 15 / 10 HP, Sub Spindle Nose 140 mm Flat, Sub Spindle ...more
Okuma #Multus-B250II-W-BBx750, OSP-P200SA-H Control, 6" chuck, 2.5" bar, 2023
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-B250II-W-BBX750
Year: 2023
OKUMA MULTUS B250II-1SW/750, Product :, Spindle Motor 30 / 20 HP, Spindle Speed 5000 RPM, Bar Cap.: 2.59″, Tools 60, Sub Spindle Chuck Size 6″, Sub Spindle Motor 15 / 10 HP, Sub Spindle Nose 140 mm Flat, Sub Spindle Speed 6000 RPM, Rapid Traverse Rates (X & Z / Y / W) 1575 / 1023 / 787 ipm, X-Axis ...more
Okuma #Multus-B400W, multi-tasking CNC lathe, OSP-P200L, 27.9" swing, 15"/12" chuck, 2007
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-B400W
Year: 2007
Okuma Multus B400W Multi-Tasking CNC LathesMaximum swing 27.9″”Cutting length 60.00″Max. Turning Length 60″C-Axis Control 360 Degrees at 0.001B Axis Indexing Angle 225 Degree at 0.001″Main Spindle Speed Range 2800 RPMMain Spindle HP 40/30 HPMain Spindle Nose A2-11Main Spindle Bore ...more
Okuma #Multus-B400W, multi-axis CNC turning center, OSP-P200L Control, 27.9" swing, 59" centers, sub spindle, 2010
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-B400W
Year: 2010
Okuma Multus B400W Big Bore Multi-Axis CNC Turning Center (subject to buyer verification):Swing Over Bed 27.95”Swing Over Saddle 27.95”*Distance Between Centers59.06” (*Dist. Between Noses)X-Axis Travel 27.17”Z-Axis Travel 60.83”Y-Axis Travel 9.06” (+4.53 to -4.53”)C-Axis ...more
Okuma #Multus-U3000-2SW/1500, OSP-P300S-H Control, sub spindle, automatic door with dual start, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-U3000-2SW/1500
Year: 2015
OKUMA Multus U3000 2SW/1500, Maximum Turning Diameter: 25.59″, Maximum Distance Between Centers: 59.05″, Main Spindle Speed Range: 5,000 RPM, Milling Speeds: 12,000 RPM, Spindle Nose: A2-6, X-Axis Travel: 25.39″, Y-Axis Travel: 9.84″, Z-Axis Travel: 62.99″, C-Axis Indexing: 0.001 Degree ...more
Okuma #Multus-U4000-2SW/2000, OSP-P300S Control, Big Bore A2-11 main spindle, Capto C6, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-U4000-2SW/2000
Year: 2015
2015 Okuma Multus U4000 2SW/2000, machine, Control: Okuma OSP-P300S, Main Spindle, Spindle Nose:A2-11, Maximum Speed: 3,000 RPM, spindle power: 22 HP (continuous) / 43 HP (30-minute), Spindle Bore (Big Bore): 4.41″, Sub-Spindle: A2-8, Maximum Turning Diameter: 25.6″, Maximum Turning Length: 78.7″ ...more
Okuma #Multus-U4000W-2ST-1500 Big Bore, multi-Axis CNC turning center, OSP-P300S-H Control, 2019
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-U4000W-2ST-1500
Year: 2019
Okuma #Twin-Star-LT300MY, 7-Axis lathe, OSP-P200L Control, 21.6" swing, 3.1" bar, 2010
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: TWIN-STAR-LT300MY
Year: 2010
OKUMA TWIN STAR LT300MY Multi-Axis Lathe, # AXIS 7, SWING 21.65″, MACHINING LENGTH 35″, BAR CAPACITY 3.15″, POWER 30 W, MAX RPM 3,800 RPM, TURNING DIA 13.78″, TAILSTOCK (YES/NO) No, CONTROL CNC (OKUMA OSP P200L CNC), TURNING DIAMETER: 13.78″, TURNING LENGTH: 35″, MAXIMUM SWING: ...more
Featured
Omniturn #GT-75, CNC lathe, 12" X, 9" Z
TBC | Dade City, FL
Category: CNC Lathes and Turning Centers
Seller: TBC
Location: Dade City, FL
Mfr: Omniturn
Model: GT-75
X axis travel 12" Z axis travel 9" Center height 3/8", 1/2" or 5/8" Tooling plate 14" x 6" Tooling type Gang type Axis repeatability.00005" Axis resolution.00005" Axis accuracy.0001" Control OmniTurn Rapid travel 300 ipm Feed rate Slowest.00005"/rev Fastest 300ipm, Threading Finest 240/inch Coursest.5"/rev, Axis ...more
OmniTurn #GT-75-Series-II, CNC gang lathe, 1-1/16" bar, 2018
Generation Machine Tools | Sarasota, FL
Category: CNC Lathes and Turning Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Omniturn
Model: GT-75-SERIES-II
Year: 2018
OMNITURN GT-75 Series II CNC Gang Lathe 2018’ #7836, OMNITURN GT-75 Series II CNC Gang Lathe 2018’ #7836, Reference # 7836, Model # GT-75 Series II, Serial # 4951G4P, Year of manufacture- 2018’, Maximum turning diameter- 6”, X-axis travel- 12’’, Z-axis travel- 9’’, Rapid ...more
OmniTurn #GT-75-Series-III, CNC gang lathe, 1-1/16" bar, 2023
Generation Machine Tools | Sarasota, FL
Category: CNC Lathes and Turning Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Omniturn
Model: GT-75-SERIES-III
Year: 2023
OMNITURN GT-75 Series III CNC Gang Lathe 2023’ C axis #7847, OMNITURN GT-75 Series III CNC Gang Lathe 2023’ C axis #7847, Reference # 7847, Model # GT-75 Series III, Year of manufacture- 2023’, Maximum turning diameter- 6”, X-axis travel- 12’’, Z-axis travel- 9’’, Rapid ...more
Quick-Tech #T8-Twin-Y, multi-axis CNC turning center, Mitsubishi M80A Control, sub spindle, 2021
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Quick-Tech
Model: T8-TWIN-Y
Year: 2021
QuickTECH T8 Twin-Y Multi-Axis CNC Turning Center (subject to buyer verification):Main Spindle CapacitySwing over cross slide 11.8”Maximum bar working capacity 2.56” (65mm)Maximum turning length 13.8”Spindle nose A2-6Hole through draw tube 2.6” (66mm)Spindle speed range (std.) 4000 RPMSpindle ...more
Romi #C-420, combination manual & CNC lathe, Siemens 840D, 16.9" swing, 43.4" centers, 8" chuck, 2010
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Romi
Model: C-420
Year: 2010
ROMI C420 Combination Manual & CNC Lathe, DISTANCE BETWEEN CENTERS………………… 43.46″, SWING OVER BED…………………………. 16.92″, SWING OVER CROSS SLIDE…………………. 7.87″ ...more
Romi #C-470, CNC Lathe, 18.5" swing, 7.9" swing over cross slide, 39.4" centers, 2.6" bore, 3k RPM, 12.5 HP, 8 tool, tailstock, Siemens Sinumerik 828D Control, 10/7 OD/ID holders, 2024
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Romi
Model: C-470
Year: 2024
18.5” X 39.37” CNC Lathe with Siemens Sinumerik 828D and a 15” Touchscreen Interface, Swing Over Bed: 18.5”, Swing Over Cross Slide: 7.87”, Distance Between Centers: 39.37”, Cross Slide (X - Axis) Travel: 8.66”, Longitudinal (Z - Axis) Travel: 41.93”, Center Height: ...more
Romi #C-620, combo lathe, 2-Axis, 26.7" swing, 12" chuck, 2.5" bar, 25 HP, 3000 RPM, 2012
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Romi
Model: C-620
Year: 2012
ROMI C620:SWING 26.77″MACHINING LENGTH 40″# AXIS 2CHUCK SIZE 12″BAR CAPACITY 2.5″POWER 25 hpMAX RPM 3,000 RPMTURNING DIA 17.7″TAILSTOCK YesLIVE TOOLING NoSUB SPINDLE NoCONTROL CNCDIMENSIONS 186 in x 66 in x 72 inWEIGHT 10,000 lbs.
Romi #G550M, CNC turning center with milling, Siemens 828D Control, 27" swing, BMT-75 tool holder, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Romi
Model: G550M
Year: 2022
Romi G550M CNC Turning Center with Milling – 2022 (subject to buyer verification):CapacitySwing over Z axis cover: 27″Max. cutting diameter: 21″Max. cutting length: 51″Travel (X axis): 11″Travel (Z axis): 53″HeadstockSpindle nose: A2-11″Spindle thru-hole: 5.6″Direct ...more
Samsung #SL-15, CNC lathe, 17" swing, 2.09" bore, 11.8" centers, 10 station, A2-5, Fanuc Oi-TF, tool presetter, 2013
Generation Machine Tools | Sarasota, FL
Category: CNC Lathes and Turning Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Samsung
Model: SL-15
Year: 2013
SAMSUNG SL-15 CNC Lathe Turning Center 2013’ #8136, SAMSUNG SL-15 CNC Lathe Turning Center 2013’ #8136, Reference #8136, Model # SL-15, Serial # 13L140062, Year of manufacture- 2013’, Max swing over bed- 17372”, Max swing over carriage- 11.81”, Max distance between centers- 11.81” ...more
Samsung #SL-40/1500, CNC lathe, Fanuc 0iTD, 26.8" swing, hydraulic 3-jaw 18" chuck, 4.6" bar, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Samsung
Model: SL-40/1500
Year: 2014
Samsung SL40/1500 CNC Lathe, Machine Control Fanuc 0i-TD, Chuck size 18″ 3 Jaw Hydraulic Chuck, Maximum Swing over Bed 26.8″, Maximum Machining Diameter 19.7″, Maximum Machining Length 60.2″, Maximum Bar Capacity 4.6″, X-Axis Travel 11″, Z-Axis Travel 63.19″, Spindle Nose / ...more
Sharp #30160-TC-F, CNC Lathe, 29.9" swing, 157.5" centers, 10-1000 RPM, Fanuc Oi-TF, chip conveyor, tailstock
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 30160-TC-F
29.92” X 157.5” CNC Turning Center with Fanuc Oi-TF Control, Flat Belt Chip Conveyor, Air Assist Manual Tailstock, High Pressure Coolant System, Full Enclosure Splash Guard and Operational Manual., Swing Over Bed: 29.92”, Swing Over Cross Slide: 19”, Distance Between Centers: 157.5” ...more
Smart Machine Tool #NL-5000L, CNC lathe, Fanuc Control, 6.5" bar, hydraulic 21" chuck, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Smart Machine Tool
Model: NL-5000L
Year: 2022
Smart Machine Tool NL5000L CNC Lathe (subject to buyer verification):Max cutting dia : 26.38”Max cutting length : 84.8”Bar capacity : 6.51”Spindle speed : 1500 rpmMotor : 30/45kw12 position turret (subject to buyer verification):Fanuc control21” hyd. chuckHydraTool presetterChip conveyor.
Smart Machine Tool #NL6000CL, Fanuc 0iTF, 24" chuck, Samchully 24" air chuck, 140 psi coolant, 2021
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Smart Machine Tool
Model: NL6000CL
Year: 2021
2021 Smart Machine Tool NL6000CL, Chuck Size: 24″, Max Turn Dia: 37.8″, Max Turn Length: 88.58″, Thru Hole: 10.83″, Spindle Speed: 1,000 RPM, Spindle Power: 73 HP, 12 Station Turret, Dimensions: 236″x94.1″, Weight: 38,140 lbs, Fanuc 0i-TF Control, 24″ Samchully Air Chuck w/ ...more
SMEC #SL-35A/1500, 2-Axis CNC lathe, Fanuc Control, 23.6" swing, 15" chuck, 4.6" bar, tailstock, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Smec
Model: SL-35A/1500
Year: 2011
SMEC (Samsung) SL35A/1500 2-Axis CNC Lathes, Control CNC (Fanuc), CHUCK SIZE (in) 15, MAX TURNING DIAMETER (in) 16.0, BAR CAPACITY (in) 4.6, MAX TURNING LENGTH (in) 60, SWING OVER BED (in) 23.6, TAILSTOCK Yes, SPINDLE SPEED (rpm) 2000, SPINDLE NOSE A2-11, SPINDLE MOTOR HP 30.
SMEC #SL-45/2200BB, CNC turning center, Fanuc 0iTD, 30.5" swing, 24.80" swing over cross slide, 24" chuck, 2012
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Smec
Model: SL-45/2200BB
Year: 2012
SMEC SL-45/2200BB CNC Turning Center (subject to buyer verification):Swing over the bed30.51”Swing over the cross slide24.80”Max. turning diameter27.17”Max. turning length 87.80”Spindle noseA2-15 (ASA)Main spindle motor40/50 hpSpindle speed1,200 rpm with 24” chuckBore diameter ...more
Southwestern Industries #Trak-1630RX, CNC toolroom lathe, 16" swing, 10" 3-jaw chuck, 12" 4-jaw chuck, 2.12" hole, 30" centers, D1-6, 150-2500 RPM, #4MT, ProtoTRAK RLX, 2019
Generation Machine Tools | Sarasota, FL
Category: CNC Lathes and Turning Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Southwestern Industries
Model: TRAK-1630RX
Year: 2019
SWI TRAK 1630RX CNC Toolroom Lathe ProtoTRAK RLX Control 2019’ #7798, SWI TRAK 1630RX CNC Toolroom Lathe ProtoTRAK RLX Control 2019’ #7798, Reference #7798, Model # 1630RX, Serial # 192EE622, Height of centers- 8”, Distance between centers- 30”, Swing over the bed- 16”, Swing over the ...more
Takamaz #XW-130, CNC Twin Spindle Turning Center w/Auto Load, 88" L x 85" width, 8" x 2" chuck, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Takamaz
Model: XW-130
Year: 2015
Takamaz XW130 for sale, CNC Twin Spindle Turning Center with GTH150 Auto Loading System, (subject to buyer verification):, Chuck size 8 × 2 inch, Spindle bearing I.D. 3.93”, Spindle speed Max. 4,000 RPM, Turret 8-station turret × 2, Max.stroke X:5.9” / Z: 6.29”, Rapid traverse rate X: 944 ...more
Takisawa #LA-250YS, multi-axis CNC turning center, Fanuc 32i-B, 23.6" swing, (2) hydraulic chucks, 2016
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Takisawa
Model: LA-250YS
Year: 2016
Takisawa LA250YS Multi-Axis CNC Turning Center (subject to buyer verification):Max. Workpiece Swing (diameter) 23.6″ (600 mm)Max Turning Diameter 14.6″ (370 mm)Max Turning Length 29″ (737 mm)Max Bar Work Capacity Main: 3″ (75 mm)Max Bar Work Capacity Sub: 2″ (52 mm)X-axis Travel ...more
Takisawa #LS-800C, heavy duty CNC lathe, Fanuc 0iTD, 32.6" swing, 7" bar, 24" chuck, 2019
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Takisawa
Model: LS-800C
Year: 2019
Takisawa LS800L30 Heavy-Duty CNC Lathe (subject to buyer verification):Max. Swing: 32.68”Swing Over Saddle: 25.59”Std. Turning Diameter: 12.99”Max. Turning Diameter: 29.92”Max. Turning Length: 120”Max. Bar Work Capacity: 7.09”X Axis Travel: 15.35”Z Axis Travel: ...more
