Buy or Sell Your G3412 Engines
AI-ranked results for g3412 - closest matches first
608 HP @ 1800 RPM, Caterpillar #G3412, generator set, 1998
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Engines
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3412
Year: 1996
MANUFACTURER: CaterpillarMODEL: G3412 Gen SetCONDITION: UsedYEAR: 1996HOURS: 2409RPM: 1800Reference: UC1797.
600 HP Caterpillar #G3412, compressor engine, Woodward psg governor
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Engines
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3412
MANUFACTURER: Caterpillar MODEL: G3412 CONDITION: Used HOURS: 20851 Serial No: 7DB00848 * Reference: UC1636 G3412 SITA, Micon Compressor Engine, with 20,851 hrs, 600 HP, Arr # 102-9407, Woodward PSG Gov, SAE # 0, 24 V Starter; Open "I" Beam Skid; FES Rotary Screw Compressor 775-M, Tank 250 PSI @ 300* F; Comp Ratio ...more
JUST ADDED!
450 KW Caterpilar #G3412, Enclosed Natural Gas Generator, 480 Volts
Power Generation Enterprises | Canyon Country, CA
Category: Natural Gas Or Dual Fuel Generators
Seller: Power Generation Enterprises
Location: Canyon Country, CA
Mfr: Caterpilar
Model: G3412
Year: 1996
Pre-owned Caterpillar G3412 Natural Gas Generator Set – Rated at 455KW Standby, 568KVA, 60Hz, 480V, 1800RPM – Includes Engine Driven Radiator, Jacket Water Heater, Main Breaker, Energenius Battery Charger – Weather Enclosed – Approximately 200 Hours on the Meter, Dims: Enclosure (9’H x ...more
JUST ADDED!
455 KW Caterpillar #G3412, Natural gas generator set, 480 Volts, 3-phase, 113 hours, 1800 RPM, weather protected enclosure, 1996
Midwest Engines & Generators | Edinburgh, IN
Category: Natural Gas Or Dual Fuel Generators
Seller: Midwest Engines & Generators
Location: Edinburgh, IN
Mfr: Caterpillar
Model: G3412
Year: 1996
This 1996 Caterpillar G3412 natural gas generator set is rated at 455 kW / 568 kVA in standby mode at 480V, 3-phase, 60 Hz, and operates at 1,800 RPM. Powered by a Caterpillar G3412 turbocharged, spark-ignited natural gas engine (S/N 7DB01214), this unit was built in August 1996 and factory-rated at 660 HP under ...more
455 KW Caterpillar #G3412, Natural gas generator set, 277/480 Volts, 3-phase, 3000 hours, 610 HP @ 1800 RPM, mechanical governor, 1996
DEPCO Power Systems | Houston, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: DEPCO Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: G3412
Year: 1996
Generator Set Type: Stand-By Engine Model: G3412 Fuel Type: Natural Gas Voltage: 277/480 Model: G3412 Panel: with Autostart and Safety Shutdowns Hours: 3000 Since New Frequency: 60 Cycles/Hz Phase: Three Phase.
1400 RPM, Caterpillar #G3412-SITA, engine core, 10:1 ratio
Collicutt Energy Services | Red Deer, AB
Category: Natural Gas Engines
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Caterpillar
Model: G3412-SITA
CAT G3412 SITA ENGINE CORE, 1400 rpm, 10:1 COMPRESSION RATIO.
380 KW Caterpillar #G3412-SITA, Natural gas generator set, 240/480 Volts, 1-phase, 1800 RPM, Marathon generator end
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3412-SITA
MODEL: G3412 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 8000+KW: 380KWRPM: 1800Serial No: 3NK00113REF# CM086.
455 KW Caterpillar #G3412, generator, 277/480 Volts, 3-phase, 660 HP @ 1800 RPM, EMCP 2, load tested, open skid mounted, Woodward EG3P governor, 1996
NineX Power Systems | Spring, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: NineX Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: G3412
Year: 1996
Used CAT G3412 Generator Set; 1996 Model – 3000 Original Hours; 455kW Standby Rated; 480/277V: Open Skid Mounted; Engine Driven Radiator; Water Cooled Manifold & Turbo; EMCP 2 Controller; Heavy Duty Air Cleaner; Gas Regulator; Electric Starter; Charging Alternator; Jacket Water Heater; Cleaned, Serviced ...more
Caterpillar, Generator Sets, Model G3412ta Engines with Ariel Jgj/2 Compressors, 2 Units/packages
A M King Industries | Oroville, CA
Category: Diesel Generators
Seller: A M King Industries
Location: Oroville, CA
Mfr: Caterpillar
Model: G3412TA
2 Units/Packages - CAT Generator Sets, Model G3412TA Engines with Ariel JGJ/2 Compressors.
625 HP @ 1800 RPM, Caterpillar #G3412TA, complete engine
Field Engine LLC | San Antonio, TX
Category: Natural Gas Engines
Seller: Field Engine LLC
Location: San Antonio, TX
Mfr: Caterpillar
Model: G3412TA
637 HP @ 1800 RPM, Caterpilar #G3412C LE, used rebuildable core - 3 available
NineX Power Systems | Spring, TX
Category: Natural Gas Engines
Seller: NineX Power Systems
Location: Houston, TX
Mfr: Caterpilar
Model: G3412C LE
Year: 2008
High Hour CAT G3412C LE Industrial Engine; 2008 Model; 637HP @ 1800RPM; 8.5:1 Compression Ratio; Gas Compression Arrangement; Deep Sump Oil Pan; Charging Alternator; Gas Regulator; SAE 0 Flywheel Housing; Water Cooled Manifold; Electric Starter; HD Air Cleaner; Three Matching Units Available, Engine: Manufacturer : ...more
Caterpillar #G3408, gas engine parts includes: gasket kit, filters, gaskets, adapters, valves, filters, more
U S Combustion Products Inc | Ketchum, ID
Category: Engine Parts
Seller: U S Combustion Products Inc
Location: Ketchum, ID
Mfr: Caterpillar
Model: G3408
250 KW Caterpillar #G3408, Natural Gas generator set,open skid mounted, 120/240 Volts, 1164 hours, 1990
Power Generation Enterprises | Canyon Country, CA
Category: Natural Gas Or Dual Fuel Generators
Seller: Power Generation Enterprises
Location: Canyon Country, CA
Mfr: Caterpillar
Model: G3408
Year: 1990
Pre-owned Caterpillar G3408 Natural Gas Generator Set - Rated at 270KW, 338KVA, 60Hz, 120/240V (12 lead), 1800RPM - Includes Engine Driven Radiator, Jacket Water Heater, Control Panel, Engine Gauge Cluster - Open Skid Mounted - 1164 Hours on the Meter.
34" x 108" Lansing #G34, engine lathe, 24" SOCS, inch/metric, 4-jaw 24" chuck, 20" ?steady rest, 30 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lansing
Model: G34
SERIAL. 9178, MODEL. G34, SWING OVER WAYS. 34", SWING IN GAP. 46", SWING OVER CROSS SLIDE. 26", DISTANCE BETWEEN CENTERS. 108", SPINDLE SPEEDS. (16) 13 TO 1000 RPM, FEEDS. ENGLISH AND METRIC, METRIC THREADS. YES, ENGLISH THREADS. YES, DIAMETER OF SPINDLE HOLE. 4 1/4", CHUCK. 24" 4 JAW, THREAD DIAL. YES, TAPER ...more
295 HP @ 1200 RPM, Caterpillar #G342TA, low hours since new, runner
Field Engine LLC | San Antonio, TX
Category: Natural Gas Engines
Seller: Field Engine LLC
Location: San Antonio, TX
Mfr: Caterpillar
Model: G342TA
150 KW Caterpillar #G342TA, Natural gas generator set, 1200 RPM, used
Field Engine LLC | San Antonio, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: Field Engine LLC
Location: San Antonio, TX
Mfr: Caterpillar
Model: G342TA
170 KW Caterpillar #G3406 PTG Field Gas generator set
S & W Power Systems & Engine | Oklahoma City, OK
Category: Natural Gas Or Dual Fuel Generators
Seller: S & W Power Systems & Engine
Location: Oklahoma City, OK
Mfr: Caterpillar
Model: G3406
200 KW Caterpillar #G3406, Natural gas generator set, 240/480 Volts, 3-phase, 18201 hours, 1800 RPM, sound attenuated enclosure
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 18200KW: 200 KWRPM: 1800Serial No: 4FD00181Reference: UC1911.
200 KW Caterpillar #G3406, Natural gas generator set, 1800 RPM, SR4
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: -Good CoreKW: 200 KWRPM: 1800Serial No: 4FD01154Reference: CM105.
200 KW Caterpillar #G3406, Natural gas generator set, 15870 hours, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 15870KW: 200 KWRPM: 1800Serial No: 4FD01680Reference: CM104.
240 KW Caterpillar #G3406 SITA SCAC Stand-by Natural Gas generator set
S & W Power Systems & Engine | Oklahoma City, OK
Category: Natural Gas Or Dual Fuel Generators
Seller: S & W Power Systems & Engine
Location: Oklahoma City, OK
Mfr: Caterpillar
Model: G3406
Caterpillar #G3408TA Ariel JGJ2 3-stage sweet compressor package, 2001
Lenmark Industries | Langley, BC
Category: Gas Compressors
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Caterpillar
Model: G3408TA
Year: 2001
SKU: 124189, Model: G3408TA, Year: 2001, Condition: Used, S/N: 6NB02423, Horsepower: 400 hp, Additional :, HP: 400 HP, Compressor:, Make: Ariel, Model #: JGJ/2, S/N: F-17111, RPM: 1800, Stage: 3 Stage, Stroke: 3.500", Fuel Gas Scrubber:, Make: Bidell Equip. @ NUMBER:, S/N: 01-108-530, MWP: 230 psi, CRN #: ...more
120 KW Caterpillar #G342NA, Natural gas, 1200 RPM, low houred running take out
Field Engine LLC | San Antonio, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: Field Engine LLC
Location: San Antonio, TX
Mfr: Caterpillar
Model: G342NA
150 KW Caterpillar #G-342NA, comp.pkg., 1200 RPM, 240/480 Volts, 3/60 Hz, rebuilt (2 available)
S & W Power Systems & Engine | Oklahoma City, OK
Category: Natural Gas Or Dual Fuel Generators
Seller: S & W Power Systems & Engine
Location: Oklahoma City, OK
Mfr: Caterpillar
Model: G-342NA
200 HP @ 1200 RPM, Caterpillar #G342NA, good tested runner
Field Engine LLC | San Antonio, TX
Category: Natural Gas Engines
Seller: Field Engine LLC
Location: San Antonio, TX
Mfr: Caterpillar
Model: G342NA
275 KW Caterpillar #G3406TA, Natural gas generator set, 277/480 Volts, 3-phase, 564 hours, 300 HP @ 1800 RPM, weather protected enclosure
DEPCO Power Systems | Houston, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: DEPCO Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: G3406TA
Year: 1996
Generator Set Type: Stand-By Engine Model: G3406TA Fuel Type: Natural Gas Voltage: 277/480 Model: G3406 Panel: with Autostart and Safety Shutdowns Batteries: Yes Hours: 564 Since New Frequency: 60 Cycles/Hz Phase: Three Phase Arrangement/Catalog#: 5N-5066.
325 HP @ 1800 RPM, Caterpillar #G3406-TA, engine, rblt.
J & R Industrial Engine Service | Oklahoma City, OK
Category: Natural Gas Engines
Seller: J & R Industrial Engine Service
Location: Oklahoma City, OK
Mfr: Caterpillar
Model: G3406-TA
Manufacturer: Caterpillar, Model: G3304 NA, Condition: Core, HP: 95HP@1800RPM, Serial #: 37Y07848Year Built: 2001.
150 KW Caterpillar #G3406-SINA, Natural gas generator set, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406-SINA
MANUFACTURER: CaterpillarMODEL: G3406 SINAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 10862KW: 150RPM: 1800Serial No: 4FD02334Reference: UC1909.
JUST ADDED!
160 KW Caterpillar #G3406-SINA, Natural gas generator set, 231 HP
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406-SINA
Brand: CaterpillarModel: G3406 SINAPower: 160KWCondition: Used – CoreSerial #: 4FD02435Ref #: CM122.
165 KW Caterpillar #G3406-SITA, mobile Natural gas generator set, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406-SITA
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS:KW: 165 KWRPM: 1800Serial No: M11J422681Reference: 2211.
200 KW Caterpillar #G3406-SITA, Natural gas generator set
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406-SITA
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 9000KW: 200 KWRPM: 1800Serial No: CTS00423Reference: CM107.
200 KW Caterpillar #G3406-SITA, Natural gas generator set, 480 Volts, 11270 hours, 1800 RPM, 2013
LarMar Industries Inc. | Midland, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: G3406-SITA
Year: 2013
MANUFACTURER: CaterpillarMODEL: G3406 SITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedYEAR: 2013HOURS: 11270KW: 200 KWRPM: 1800Serial No: CTS00881Reference: UC1844.
200 KW Caterpillar #G-3406SITA, complete package, 1800 RPM, 480 V., 3/60 Hz.
S & W Power Systems & Engine | Oklahoma City, OK
Category: Natural Gas Or Dual Fuel Generators
Seller: S & W Power Systems & Engine
Location: Oklahoma City, OK
Mfr: Caterpillar
Model: G3406SITA
750 KW Caterpillar #D3412, diesel generator set, 480 Volts, 980 hours, 23.8 sq.ft. radiator, enclosure, 1999
Foley Equipment - Power | Wichita, KS
Category: Diesel Generators
Seller: Foley Equipment - Power
Location: Wichita, KS
Mfr: Caterpillar
Model: D3412
Year: 1999
Notes. ENCLOSED CAT 3412 GENERATOR SET, 750KW STANDBY @ 480V 1200AMP MOUNTED CIRCUIT BREAKER, s 1200AMP MOUNTED CIRCUIT 23.8 SQ FT RADIATOR 24V ALTERNATOR 750KW STANDBY @ 480V Breaker EMCP 2 PLUS CONTROLLER ENCLOSED CAT 3412 PACKAGE GENERATOR SET STANDBY AIR FILTERS Benefits Online Owner's Manual.
545 KW Caterpillar #D3412, generator set, 480 Volts, 100 hours since new
Pan American Power | Covington, LA
Category: Diesel Generators
Seller: Pan American Power
Location: Covington, LA
Mfr: Caterpillar
Model: D3412
Catr D3412 545KW Generator Set, less than 100 Hours since new, 81Z1976, Marathon Oversize Generator, 480VAC.
625 HP Caterpillar #D3412E, diesel engine, 6 hours, 1400 RPM, 2002, S/N #4CR01541
LarMar Industries Inc. | Midland, TX
Category: Diesel Engines
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: D3412E
Year: 2002
MANUFACTURER: Caterpillar MODEL: D3412E YEAR: 2002 HOURS: 6 HP: 625.0 hp RPM: 1400 Serial No: 4CR01541 Reference: UC2042 D3412E Industrial Diesel Engine, S/N 4CR01561, Arr# 156-7211, Spec# OK-0954, 625HP, 1400RPM Premium Gauge Panel, Radiator, 6 Hrs on ECM.
500 KW Caterpillar #D3412TA, diesel generator set, 1800 RPM, used running takeout
Field Engine LLC | San Antonio, TX
Category: Diesel Generators
Seller: Field Engine LLC
Location: San Antonio, TX
Mfr: Caterpillar
Model: D3412TA
645 HP Caterpillar #D3412DITT, diesel engine core, 1800 RPM, Woodward governor
LarMar Industries Inc. | Midland, TX
Category: Diesel Engines
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: D3412DITT
MANUFACTURER: Caterpillar MODEL: D3412DITT CONDITION: Used RPM: 1800 Serial No: 38S09225 Reference: UC1447 D3412 DI CAT ARR# 4N2449 645 HP, 1800 RPM, WOODWARD GOVERNOR' s#38S09225, with Radiator Grp.
520 HP Caterpillar #D3412DITTA, diesel engine core, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Diesel Engines
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: D3412DITTA
MANUFACTURER: Caterpillar MODEL: D3412DITTA CONDITION: Used HOURS: 10680 RPM: 1800 Serial No: 38S09575 Reference: UC1634 D3412DITT, 10,680 hrs, 520 BHP, 388 kW @ 1800 RPM; HYDRA-MECH; SAE # 0, 24V Starter, 17' Rad, GSE;.
350 KW Caterpillar #D3412DIT, diesel generator set, 240/480 Volts, 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Diesel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: D3412DIT
MANUFACTURER: Caterpillar MODEL: D3412DIT ENGINE MANUFACTURER: Caterpillar CONDITION: Used KW: 350 KW RPM: 1800 Serial No: 38S5903 Reference: UC1840 350 KW Gen D3412 DIT Gen SET, CAT SR4 Generator rated 350KW, 240/480V, Cat Hydra-Mech GOV. CAT RAD with blow fan, unit was load tested, repaired, serviced, and painted ...more
JUST ADDED!
34" x 118" Microweily #TY-34x120-10, Heavy Duty Engine Lathe, 25.10" swing over cross slide, 17.71" center height, 10" hole thru spindle, 2011
Olympia Technical Services | Whitby, ON
Category: Engine Lathes
Seller: Olympia Technical Services
Location: Whitby, ON
Mfr: Microweily
Model: TY-34X120-10
Year: 2011
W/ 10" HOLLOW SPINDLE, 4 JAW REAR MOUNTED CHUCK AND ONE STEADY REST, TECHNICAL :, SWING OVER BED. 34", SWING OVER CROSS SLIDE. 25.10", CENTER HEIGHT. 17.71", SPINDLE NOSE CAMLOCK. A1-15, HOLE THROUGH SPINDLE. 10", DISTANCE BETWEEN CENTERS. 118.1", SPINDLE SPEED RANGE (12). 10 - 500 RPM, LONGITUDINAL FEED RANGE (70). ...more
1200 cfm, Vent Vent Boss #G120, 1.5 HP Direct drive, reverse inclined high performance blower wheel, 2022
Mid Atlantic Machinery | Harrisburg, PA
Category: Rotary-Positive Blowers
Seller: Mid Atlantic Machinery
Location: Harrisburg, PA
Mfr: Vent Boss
Model: G120
Year: 2022
Capacity: 1200 CFM @ 4.5 in.W.G.Motor: 1.5 HP, Direct DriveFull Load Amps: 20.0Blower: Reverse inclined high performance blower wheelSound Level: 70 dBASilencing: Integral Acoustical Plenum with Low Frequency DampeningControls: Manual on/off switch, Minihelic Filter Condition GaugeCabinet Dimensions (HxLxD): 53″ ...more
96 KW Wacker Neuson #G120, diesel, sound attenuated enclosure, 240/480 Volts, 20764 hours
Coastal Power & Equipment LLC | Pearland, TX
Category: Diesel Generators
Seller: Coastal Power & Equipment LLC
Location: Pearland, TX
Mfr: Wacker Neuson
Model: G120
unit title Wacker Neuson G120 package manufacturer Wacker Neuson generator model Wacker G120 engine manufacturer John Deere fuel capable Diesel kw kva rating 96KW/120KVA rpm 1800 voltage 240/480 amps 143 power factor 0.8 frequency 60HZ enclosure type Sound enclosure/Base Tank meter 20764.
Zalkin Fowler #CASF12/8-73-48, automatic, Stainless Steel, 12 head rotary chuck capper
Frain Industries | Carol Stream, IL
Category: Neck Banders and Cappers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Zalkin
Model: CASF12/8-73-48
Zalkin / Fowler Model CASF, automatic, stainless steel, 12 head rotary chuck capper with number of containers per minute – depending on materials and application. Cap and container sizes: per application with proper change parts. 140" long x 3-1/2" wide plastic interlock container belt conveyor, has ...more
48" Flagler #GB-348, sheet gang slitter/beader, 22 gauge capacity, 1 HP, 1994
Yoder Machinery Sales | Holland, OH
Category: Slitters
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Flagler
Model: GB-348
Year: 1994
SERIAL. GB-348555294, MODEL. GB348, YEAR NEW. 1994, CAPACITY. 22 GAUGE, LENGTH OF ROLLS. 50", BEADING TOOLING. YES, PHASE. 1, VOLTAGE. 110, HORSEPOWER. 1.
220 Ton, Stamtec #G1-200, 7.88" stroke, 17.73" Shut Height, 4.33" adj., 20-50 SPM, air clutch & brake
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Stamtec
Model: G1-200
Stroke 7.88 inches Powered Ram Adjustment 4.33 inches Shut Height 17.73 inches Strokes Per Minute 20-50 Ram Size 33" x 24" Bed Size 55" x 33" Air Clutch (Yes/No) yes Air Counter Blance Cylinder yes Hydraulic Overloads yes Floor Sanding yes Dual Palm Buttons yes.
JUST ADDED!
120000 lb. Aronson #G1200, Welding Positioner, 120" x 120" table, 15 HP, variable speed, pendant Control, 1980
Southern Fabricating Mchy Sales | Lithia, FL
Category: Welding Positioners
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Aronson
Model: G1200
Year: 1980
120,000 Lbs Capacity Welding Positioner with Pendant Control and Variable Rotation Speed., Capacity @ 12”: 120,000 Lbs, Capacity @ 18”: 96,000 Lbs, Capacity @ 24”: 80,000 Lbs, Table Size: 120” X 120”, Table Center Height: 98”, Tilt Capacity: 135°, Main Motor: 15 HP, Tilt Motor: ...more
120000 lb. Aronson #G1200, 460 V. input, variable speed rotation, power tilt, 120" x120" table
Mitrowski Welding Equipment | South Houston, TX
Category: Welding Positioners
Seller: Mitrowski Welding Equipment
Location: South Houston, TX
Mfr: Aronson
Model: G1200
200 Ton, Stamtec #G1-200, gap frame press, 7.87" stroke, 17.72" Shut Height, 4.33" ram adjustment, 2000
National Machinery Exchange | Newark, NJ
Category: Gap Frame Single Crank Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Stamtec
Model: G1-200
Year: 2000
200 TON STAMTEC MODEL #G1-200 (NEW 2000) GAP FRAME PRESS, SERIAL. S001142, MODEL. G1-200, YEAR. 2000, STROKE. 7.87, SPM. 50 TO 50 VARIABLE, SHUT HEIGHT. 17.72", RAM ADJUSTMENT. 4.33", SLIDE / RAM AREA. 24.80" FB X 33.47" LR, BED AREA. 32.28" FB X 52.12" LR, BOLSTER PLATE., RAM & BED T-SLOTTED. YES, STROKE MODES. ...more
220 Ton, Stamtec #G1-200, gap frame press, 7.87" stroke, 17.72" Shut Height, 4.33" adj., 55.12" x32.28" bed, 25-50 SPM, Wintress Smart Pac, air clutch & brake
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Stamtec
Model: G1-200
Z23051B, 7.87" Stroke, 17.72" Shut Height Over Bolster, 4.33" Powered Ram Adjustment, 33.47" X 24.80" Ram, 55.12" X 32.28" Bed, 25 - 50 SPM, Air Clutch, Air Brake, Air Counterbalance, Palm Buttons, Hydraulic Overload, Mfg Sept 2000, Wintress Smart Pac, T - Slotted Ram And Bolster, 25 Hp, 72" LR X 103" FB X 160" Tall ...more
220 Ton, Stamtec #G1-200, single point gap frame press, 7.88" stroke, 17.73" die hght, 4.33" adj., 20-50 SPM, air clutch & brake, #11316
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Stamtec
Model: G1-200
Capacity: 220 Ton, Stroke: 7.88, Adjustment: 4.33, Die Height: 17.73, Speed: 20 - 50 SPM, Bed Area: 55 lr x 32 fb, Slide Area: 33 lr x 24 fb, Air Clutch and Brake, Air Counterbalance, Motorized Slide Adjustment, Overall height: 126, Catalog Weight: 46,000#, Capacity: 220 Ton, Stroke: 7.88, Adjustment: 4.33, Die ...more
125 Amps, Square D, KC34125, #725557
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Square D
Model: KC34125
Square D Circuit Breaker, Molded Case type, Catalog Number KCP34125, 125 amp frame current, 480 volts.
12.99" x 19.6" Okuma #GA-34N, CNC angle head grinder, 16" x 5" x 3" wheel, OSP 5000 Control, 12733 hours, under power, good condition, 1989
A-1 Grinding Corp | Cleveland, OH
Category: CNC Angle Head Cylindrical Grinders
Seller: A-1 Grinding Corp
Location: Cleveland, OH
Mfr: Okuma
Model: GA-34N
Year: 1989
Okuma CNC Angle Head Grinder. Model GA-34N. OSP5000 Control. 12.99" swing x 19.69" Centers. 16 x 5 x 3" wide wheel., Paper Filtration. Good condition. Under power. 12,733 hours. Serial 0165.
3 Fans, Imeco #GPX340L8-1230, Ammonia Evaporator Coil, 16225 CFM, 762 FPM, 1140 RPM, 460 V.
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Imeco
Model: GPX340L8-1230
Imeco GPX-40L8 Series Low Temperature Evaporator Coil. Model: GPX340L8-1230. Serial No: 9865-1LH. FIns Per Inch: 3. Sq.Ft. Face Area: 26.3. Sq.Ft. Coil Surface: 2475. Coil Volume: 3.65. CFM: 20005. FPM: 762. (3) Fans: HP: 1/2.
12" Pac Machinery #PI-G12, Impulse Sealer, 100/120 V.
Federal Equipment Company | Cleveland, OH
Category: Sealers and Sealing Systems
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Pac Machinery
Model: PI-G12
PAC 12" Impulse Sealer. Model PI-G12. S/NG00120-112506.
250 Ton, Rousselle #G1-250, 8" stroke, 32" x54" bed area, 40 SPM, bolster, air clutch, one owner, 1989, Tag 16322
Yeoman Machinery Corp | Elkhart, IN
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Rousselle
Model: G1-250
Year: 1989
55000 cfm Dixie Air Systems #SPB-LH-348-12, baghouse dust collector, (348) 12' Long filter bags, 5701 sq.ft., automatic pulse clean
AM Industrial | Brook Park, OH
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Dixie Air
Model: SPB-LH-348-12
Product, Stock Number AM22136 Brand Other Filter Media Area (square feet of media) 5,701 Capacity 55,000.00 cfm, Dixie Air Systems 55,000 cfm round baghouse-type dust collection system, Model: 348-12Holds (348) 12′ long filter bagsAutomatic Pulse Cleaning System with manifold and pulse valves Walk-in Clean Air ...more
Guoxin #GX-12" automatic induced air mesh belt drying machine, 27.75 KW, 230/460 V.
Lenmark Industries | Langley, BC
Category: Dryers and Coolers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Guoxin
Model: GX-12-4
SKU: 131534, Model: GX-12-4, Condition: Used, Electrical :, Voltage: 230/460 volts, Additional :, Total Power: 27.75 kW, Layers: 4, Induced Draft Fan: 22 kW (30hp) 230/460V 2., Feeding Conveyor: 3kW (4hp) 230/460V, Heat Exchanger Exhaust Fan: 2.2kW (3hp) 230/460V, Discharge Conveyor: 0.55 kW, Input Capacity: 180 to ...more
Guoxin #GX-12-4, hemp dryer, 69 square meters drying area, 0-120°C
Machinery & Equipment Co | Brisbane, CA
Category: Cannabis Processing Machinery
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Guoxin
Model: GX-12-4
Guoxin Hemp Dryer; Model GX-12-4; Drying Area 69 square meters; Spread thickness of material 50-200 mm; Working temperature 0-120 degrees C; Drying Time 0.5-5 hours; 22 kW Induced Draft fan; 2.2 kW Exhaust fan; 3 kW Feeding Conveyor; 0.55 kW Discharge Conveyor; 27.75 kW total power; Dimensions: 23m x 5.5m x 2.8m. ...more
Guoxin #GX-12-4, Hemp Dryer, 69 sq.m. dry area, 50-200 mm spread thickness, 0.5-5 hours dry time, 0-120 deg. C, 27.75 kW total
Aaron Equipment Co | Schaumburg, IL
Category: Cannabis Processing Machinery
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: GX-12-4
used- guoxin hemp dryer; model gx-12-4; drying area 69 square meters; spread thickness of material 50-200mm; working temperature 0-120 degrees c; drying time 0.5-5 hours; 22 kw induced draft fan; 2.2 kw exhaust fan; 3 kw feeding conveyor; 0.55 kw discharge conveyor; 27.75 kw total power; dimensions: 23m x 5.5m x 2.8m.
125 Amps, Square D, KC34125G, #1393961
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Square D
Model: KC34125G
Magnapower #OIP3412x30, magnetic inline separator, 14" working gap, 1500mm magnetic range, new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: OIP3412X30
Magnetic Inline Separator, With Motor & Reducer, 14" Working Gap, 1500mm Magnetic Range.
1004 HP @ 1400 RPM, Caterpillar #G3512, Natural gas engine, 2002
J & R Industrial Engine Service | Oklahoma City, OK
Category: Natural Gas Engines
Seller: J & R Industrial Engine Service
Location: Oklahoma City, OK
Mfr: Caterpillar
Model: G3512
Year: 2002
Manufacturer: Caterpillar, Model: G3512, Condition: Core, HP: 1004HP@1400RPM, Serial # WPR00113, Arr# 2733067 Test Spec# OK7652 Year 2002.
550 KW Caterpilar #G3512, Natural Gas Generator, 480 Volts, option to rebuild if desired
Power Generation Enterprises | Canyon Country, CA
Category: Natural Gas Or Dual Fuel Generators
Seller: Power Generation Enterprises
Location: Katy, TX
Mfr: Caterpilar
Model: G3512
Year: 2000
Pre-owned Caterpillar G3512 Natural Gas Generator Set - Rated at 550KW, 60Hz, 480V, 1200RPM - Previously Set to Run on Digester Gas - Includes Remote Radiator, Freestanding Digital Control Panel - Open Skid Mounted - Approximately 19206 Hours, Price displayed is as-is. Unit can be rebuilt to 0 hours with warranty. ...more
750 KW Caterpillar #G3512, Natural Gas Generator Set, standby, 277-480 Volts, 2024
Powersafe Energy Services | Surrey, BC
Category: Natural Gas Or Dual Fuel Generators
Seller: Powersafe Energy Services
Location: Surrey, BC
Mfr: Caterpillar
Model: G3512
Year: 2024
One CAT Model G3512, 750kW Standby. 480V, 3PH, 60Hz, 1800RPM Open Skid Natural Gas Generator Set, c/w : CAT EMCP 4.3 Controller, I/O Module, Space Heater, Local Annunciator, Remote Annunciator, Engine Mounted Radiator, Jacket Water Heater, Batteries, Battery Charger, 45A Charging Alternator, Oil Level Regulator, 1200A ...more
JUST ADDED!
1000 KW Caterpillar #G3512, Standby Natural gas Generator, 1341 HP, sound attenuated enclosure, 500 Hrs, 2021
McKain Power Systems Consulting LLC | Katy, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: McKain Power Systems Consulting LLC
Location: Katy, TX
Mfr: Caterpillar
Model: G3512
Year: 2021
550 KW Caterpillar #G3512, natural gas, sound attenuated enclosure, 480 Volts, s/n #CSP00263, 1 hour, 2014
Milton Cat Power Systems Div | Milford, MA
Category: Natural Gas Or Dual Fuel Generators
Seller: Milton Cat Power Systems Div
Location: Milford, MA
Mfr: Caterpillar
Model: G3512
Year: 2014
550 KW Caterpillar #G3512, natural gas, sound attenuated enclosure, 480 Volts, s/n #CSP00262, 1 hour, 2014
Milton Cat Power Systems Div | Milford, MA
Category: Natural Gas Or Dual Fuel Generators
Seller: Milton Cat Power Systems Div
Location: Milford, MA
Mfr: Caterpillar
Model: G3512
Year: 2014
550 KW Caterpillar #G3512, 277/480 Volts, 3-phase, Zero Hours, 2000
NineX Power Systems | Spring, TX
Category: Natural Gas Or Dual Fuel Generators
Seller: NineX Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: G3512
Year: 2000
Rebuilt CAT G3512 Generator Set; 2000 Model; 550kW Continous Rated; 480/277V; Open Skid Mount; Remote Radiator; CAT EIS Ignition; Electric Starters; Heavy Duty Air Cleaners; Electric Prelube; Reconditioned Generator End; Zero Hour Overhaul Engine, Generator Set: Manufacturer : Caterpillar Package Model : G3512 Package ...more
615 KW Caterpillar #G3512 TA, Natural Gas generator set, 480 Volts
Industrial Motor Power Corp | Encino, CA
Category: Natural Gas Or Dual Fuel Generators
Seller: Industrial Motor Power Corp
Location: Encino, CA
Mfr: Caterpillar
Model: G3512
Item Number: 15959, Manufacturer: Caterpillar, Fuel Type: Natural Gas, Model: G3512 TA, KW: 615, Hz: 60, Voltage: 480, RPM: 1200, Hours: 0 Since New, Price: Call For Price, More Information: Caterpillar G3512 TA Natural Gas Generator Set. Rated at 615kw, 60hz, 480v, 1200rpm. 0 hours since new. EMCP II+ Control Panel ...more
Jlg Industries, Inc. G12-55A, Telehandler, 4075 hours, S/N: 0160056710, 2013
Holt Of California - Heavy Machinery | Pleasant Grove, CA
Category: Telehandlers
Seller: Holt Of California - Heavy Machinery
Location: Yuba City, CA
Mfr: Jlg
Model: G12-55A
Year: 2013
120000 lb. Koike Aronson #G1200VF, welding positioner w/10'square table, very nice, late model
Kevins Equipment Co. KEC | Houston, TX
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: G-1200 VF
2014 MODEL AND VERY NICE! UNIT TO BE SOLD IN EXCELLENT CONDITION ! KEC WILL FULLY INSPECT, CYCLE AND ADDRESS ANY ISSUES PRIOR TO SHIPPING!.
Caterpillar G120-CONTRACTOR-GRAPPLE, Grapple, S/N: GCG00318,
Carter Machinery Co. Inc. - Machinery | Salem, VA
Category: Grapples
Seller: Carter Machinery Co. Inc. - Machinery
Location: Chesapeake, VA
Mfr: Caterpillar
Model: G120-CONTRACTOR-GRAPPLE
Year: 2018
279-7307 GRAPPLE, CONTRACTOR
FOR: PIN-ON OR PG COUPLER
B" FAMILY LINKAGE
NEEDS 320-7415 TO COMPLETE UNIT, Grapple Type - Demolition, Mounting Type - Excavator.
Grizzly #G1258, 20" Band Saw, 3 HP, 20" x 24" tilting table, 20" throat, 2002
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Grizzly
Model: G1258
Year: 2002
3 HP motor, 20” x 24” tilting table, 20@ wheels, 20” throat, 13-7/8 cutting height, rack & pinion guide adjustments, 154-1/2” blade.
10000 lb. Yale #GLP-120, LP gas forklift, side shift, solid tires
Yoder Brothers Machinery | Toledo, OH
Category: Forklifts
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Yale
Model: GLP-120
Weight18830 pounds, SERIAL. F813V02605E, NEW. 2007, MODEL. GLP120VXNGGE105, CAPACITY. 9800 LBS, FORK POSITIONING. YES, SIDE SHIFT. YES, BACK TILT. 6 DEGREES, SOLID TIRES. YES, TRUCK WEIGHT. 18,830 LBS.
10" x 12" Nelmor #G1012, Granulator, top feed, 7.5 HP
Nationwide Machinery Llc | Mount Clemens, MI
Seller: Nationwide Machinery Llc
Location: Troy, MI
Mfr: Nelmor
Model: G1012
Nelmor Granulator, Model G1012, S/N 8311 19930, - Opening: 10" x 12", - Motor: 7.5 HP, - Electrics: 230-460/3/60 - currently wired for 230 volt, - Top feed.
125 Amps, Square D, EDB34125SA, Bolt-On Circuit Breaker, 480 Volts 3P 3PH EDB Shunt Trip 120V
OK Sales Inc | Burlington, NC
Seller: OK Sales Inc
Location: Burlington, NC
Mfr: Square D
Model: EDB34125SA
Square D EDB34125SA Bolt-On Circuit Breaker 125A 480V 3P 3PH EDB Shunt Trip 120V., Condition Notes: Take-out. Includes all mouting screws., Used working condition. Removed from working service environment. Industrial surplus., Most items ship same day or next day of payment received from North Carolina., UPS Next Day ...more
3 Ton, Budgit #115349-12, electric chain hoist, 4 button pendant Control, chain box, 1988
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Budgit
Model: 115349-12
Year: 1988
SERIAL. 222628MODEL. 115349-12CATALOG. N-400-2RYEAR NEW. 1988CAPACITY. 3 TONLIFT. 10'FEET PER MINUTE. 5 CHAIN BOX. YES4-BUTTON PENDANT CONTROL. YESBUDGET TROLLEY. YESVOLTAGE. 110PHASE. 1PENDANT CONTROL. YES.
75 GPM, Tuthill #GG120I, 3" Globalgear Pump, Carbon Steel, 5/3 HP, 230/460 V., 1735 RPM
EcReCon Inc. | Pedericktown, NJ
Category: Positive Displacement Pumps
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Tuthill
Model: GG120I
, (5) Tuthill Gear Pumps Model GG120I. 3". With 5/3 HP, 230/460 volt, 1735 rpm Explosion proof drives. Rated 75 GPM @ 780 rpm. GlobalGear pump, TUTHILL GG120 3" Global Gear pump, GPM. 75, Type. Positive Displacement, Horz/Vert. H, Size. 3", Material. Carbon Steel.
JUST ADDED!
51.1" Yama Seiki #GV-1200, CNC vertical turret lathe, 16 ATC, 63" sw, 49" 4-jaw chuck, 49.2" table diameter, Fanuc 0I-TD, Renishaw tool presetter, 2012
Used CNC LLC | Huntley, IL
Category: CNC Vertical Boring Mills – includin...
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Yama Seiki
Model: GV-1200
Year: 2012
YAMA SEIKI GV-1200 Boring Mills Vertical CNC, 2025 model, used. s a 49.2" table diameter and 63.0" swing diameter, ideal for precise machining tasks. Perfect for upgrading your workshop with advanced capability., 2012 YAMA SEIKI GV-1200, Table Diameter. 49.2", Table Load Capacity. 11,000 lb, Swing Diameter. 63" ...more
Magnapower #OIP3412x90, magnetic inline separator, 14" working gap, 1500mm magnetic range, new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: OIP3412X90
Magnetic Inline Separator, With Motor & Reducer, 14" Working Gap, 1500mm Magnetic Range.
Bosch #GKF-120, Capsule Filler, serial# 640463, 1985
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Bosch
Model: GKF-120
Year: 1985
Used Bosch GKF 120 Capsule Filler, serial# 640463, built in 1985.
5/8" x 6" EW Menn #GW-120, Thread Roller, Incomplete
Machinery Exchange International | Posen, IL
Category: Thread Rollers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Ew Menn
Model: GW-120
See photos for condition, Comes with plug and play electrical panel.
810 HP @ 1200 RPM, Caterpillar #G3512LE, Natural Gas Engine, Gemini #D602 Reciprocating Compressor, AXH Cooler, 1650 PSI
Lenmark Industries | Langley, BC
Category: Natural Gas Engines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Geminis
Model: G3512LE
Year: 2003
SKU: 124187, Year: 2003, Condition: Used, S/N: D263, Compressor Air Type: Reciprocating, Power Type: Natural Gas, Electrical :, Horsepower: 810 hp, Additional :, Compressor: GEMINI COMPRESSORS - D602 2-Stage Reciprocating Compressor, Ser. D263, Engine: CATERPILLAR - G3512LE 810HP, 1200RPM Industrial Natural Gas ...more
X348, 3" i-beam overh, 2000' available
American Industrial Sales LLC | Berlin, WI
Category: Overhead Conveyors
Seller: American Industrial Sales LLC
Location: Berlin, WI
Model: X348
Winsmith #X348, drive
Buy Rite Finishing | Hastings, NE
Category: Miscellaneous Conveyors
Seller: Buy Rite Finishing
Location: Hastings, NE
Mfr: Winsmith
Model: X348
Winsmith X348 Drive, Serial# 010XCLD4X000MM, Model# 10LD, Date 1/1996, RPM 1800, HP 2.75, Ratio 300 PRICING, $2,500.00, ASSEMBLY / DISASSEMBLY / FREIGHT, Buy Rite Finishing is a full service supplier and can assist in removal, relocation & assembly., WARRANTY, All equipment is sold in as-is-where-is condition ...more
6" x 12" DoAll #G-612M, surface grinder, 7" x 1/2" x 1-1/4" wheel, Walker Ceramax magnetic chuck, 1986
MD Equipment Services LLC | Crooked River, OR
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Doall
Model: G-612M
Year: 1986
Manual Surface Grinder, Manufacturer: DoAll, Model: G-612M, DOM: 1986, Electrics: 230 Volt, 3 Phase, 60 Cycle, 2.6 Amps, Main Motor: 1 HP, s and :,.Capacity: 6" x 12",.Manual Feed,.Spindle :,.Model: MD-5,.Serial No.: 298,.Max. Speed: 3,450 RPM,.Feed Graduation Values:,.Vertical Feed: 0.0001",.Cross-Feed: ...more
125 Amps, Square D, KCF34125, #840604
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Square D
Model: KCF34125
Square D Circuit Breaker, Molded Case type, Catalog Number KCF34125, 125 amp frame current, 480 volts.
JUST ADDED!
16" x 20" Nelmor #G1220M1, Industrial Plastic Granulator, 25 HP, 230 V
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nelmor
Model: G1220M1
NELMOR MODEL G1220M1 INDUSTRIAL PLASTIC GRANULATORNelmor Model G1220M1 industrial plastic granulator in excellent working condition. Clean, solid machine that runs great and is ready for production. -- 25 HP main motor -- 20" x 16" feeder opening -- 230V / 3 Phase power -- Dura Pulse variable frequency drive for ...more
JUST ADDED!
Italpresse #GL120-P, Embossing Press, 47.25" x 19.75" Platen, 12.75" Opening, 12.75" Stroke, (4) 5.9" diameter Cylinders, 330 Tons total Pressure
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Italpresse
Model: GL120-P
ITALPRESSE GL120-P Embossing Press -- :47-1/4" (1,200 mm) x 19-3/4"(500 mm) platen size, 12-3/4" (325 mm) opening & 12-3/4" stroke, (4) 5.9" dia. upstroke cylinders, 330 tons total pressure, side loading. -- Solid steel drilled platens with insulated electric heating elements, both platens insulated from the press ...more
125 Amps, Square D, KCP34125, 480 Volts, #947733
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Square D
Model: KCP34125
Square D Circuit Breaker, Molded Case type, Catalog Number KCP34125, 125 amp frame current, 480 volts.
.02" -.034" x 4' RBI #G-12S-48, hydraulic shear and runout cut, 1987, #69019
Yoder Machinery Sales | Holland, OH
Category: Power Squaring Shears (Inch)
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rbi
Model: G-12S-48
Year: 1987
SERIAL. SHC87-M1072, MODEL. G-12S-48, YEAR NEW. 1987, CAPACITY.020 TO.034, WIDTH. 48", MISSING HYDRAULIC PUMP SHEAR ONLY.
Allen-Bradley #KVA343-412, inverter, 400 HP, 500-600 Volts, serial #MEAF00M3, 2000
Perry Videx LLC | Hainesport, NJ
Category: Power Inverters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Allen-Bradley
Model: KVA343-412
Year: 2000
Allen Bradley 400 HP Inverter. 500-600 volt input, 3 phase, 50-60 hertz. Model kVA343-412, serial number MEAF00M3. New 12/13/2000., 2000 ALLEN BRADLEY kVA343-412.
AEC #G1224P1, Granulator Mill, 74" H infeed hopper, 30 HP, 1760 RPM, 230/460 V
Genemco | Hearne, TX
Category: Granulators
Seller: Genemco
Location: Hearne, TX
Mfr: Aec
Model: G1224P1
AEC Nelmor Co Inc. Grinder / Hammermill. Model: G1224P1. Serial: 92 05 30811. Nominal throughput rating: 600-700 lbs per hour using polypropylene and 5/16 inch screen. Unit has a hopper infeed spray bridge. Infeed height: 74 in. Granulator mill has rotating blades that reduce particle size until they pass through the ...more
Sharples #M-451-24-8R34, Super Centrifuge, Stainless Steel, 25000 RPM bowl, 1/10 HP, 100/125 V
Machinery & Equipment Co | Brisbane, CA
Category: Super Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Sharples
Model: M-451-24-8R34
Sharples Super Centrifuge, Model M-451-24-8R34 - Operates at a maximum bowl speed of 25,000 RPM. s 316 stainless steel contact parts. Powered by a 1/10 HP, 100/125V single-phase motor. Serial number 421A602., HP:.1, Materials of Construction: 316 Stainless Steel, Basis: FOB, Bowl Speed: 25,000.
12" x 10" Nelmor #G1012M1, Plastic Granulator, 480 V., 3-Ph., Reconditioned
Breakthru Surplus | Waukesha, WI
Seller: Breakthru Surplus
Location: Waukesha, WI
Mfr: Nelmor
Model: G1012M1
G1012M1 Approx Opening Size: 12inch x 10inch Approx Overall Size: 66inch Tall x 58inch Long x 30inch Wide 20A 480V 3 Phase.
Gardner #GVS1-23, Vertical Single Spindle Disc Grinder, 23" diameter x 3" thick Abrasive, 20 HP, 2000
GCH Machinery | Warren, MI
Category: Vertical Spindle
Seller: GCH Machinery
Location: Warren, MI
Mfr: Gardner
Model: GVS1-23
Year: 2000
Gardner GVS1-23 Vertical Disc Grinder with 23" x 3" capacity. s include a 20 HP motor, water-cooled spindle, auto/manual cycles, and servo-driven ball screw feed for ultra-fine adjustments., MODEL GVS1-23 GARDNER VERTICAL SINGLE, SPINDLE DISC GRINDER, S/N 912-07 Year: 2000, High productivity combined with ...more
15" x 13" Nelmor #G1215P1, plastic granulator, reconditioned
Breakthru Surplus | Waukesha, WI
Seller: Breakthru Surplus
Location: Waukesha, WI
Mfr: Nelmor
Model: G1215P1
G1215P1 480V 30A 3 Phase Approx Opening Size: 15inch x 13inch Approx Overall Size: 70inch Tall x 42inch Long x 42inch Wide.
125 KW Olympian #G125G1 GM-8.1L, Natural gas generator,open skid, 120/208 Volts,Tier 2,2008
Kilowatts Power Solutions | Post Falls, ID
Category: Natural Gas Or Dual Fuel Generators
Seller: Kilowatts Power Solutions
Location: Post Falls, ID
Mfr: Olympian
Model: G125G1
Year: 2008
The Olympian range of generator sets provides reliable energy solutions for every business, every need. The generator sets are designed, engineered and manufactured for optimal performance., YEAR: 2008, MANUFACTURER: Olympian, GENERATOR MODEL: G125G1, GENERATOR S/N: G00679, ENGINE MODEL: GM-8.1L, KW: 125, KVA: 156.3 ...more
120 KW Daewoo Doosan, generator, enclosure mounted on trailer, #090004
Generator Source | Brighton, CO
Category: Diesel Generators
Seller: Generator Source
Location: Brighton, CO
Mfr: Daewoo Doosan
Model: G585-G12
Year: 2019
Used Doosan 124kW Diesel generator. This Prime power unit s a Trailer/SAE enclosure and has approximately 5771 hours of use. It provides Voltage Selector Switch power at VOLTAGE SELECTOR SWITCH and is ready to ship from our Pensacola, Florida facility., Model: G585-G12, Capacity: 176, Amps: 450, Volts: Voltage ...more
