Buy or Sell Your Manipulators

MODEL #: IR-10, SERIAL #: 25-3071R-I, 10,000 WEIGHT CAPACITY, 6" - 12' DIAMETER CAPACITY, 8" WIDE x 16" DIAMETER RUBBER WHEELS, 44" TO THE TOP OF THE WHEELS, MOUNTED ON TRAVEL CAR THAT RUNS ON 59-1/2" GAUGE TRACK, 96" LR x 48" FB x 48" TALL, 1750 LBS APPROXIMATE WEIGHT, GOOD CONDITION.

Used Preaston Eastin 3,000lb Tilt/Turn Posiitoner and Chuck, Positioner:, Model: PE30HD, 2015 Year Model, 3,000lb Capacity @ 6'' C.O.G., Variable Speed Rotation, Powered Gear Tilt, Height Adjustable Base, 600A Welding Ground, 120 Volt Input, Hand Pendant and Footpedal Controller, Profax Gripper Chuck, Model: ...more

33,000 Lbs Capacity Hydraulic Welding Positioner with Digital Speed Indicator on Control Panel, Remote Controller with 5 Meter Cable, Adjustable Rotation Speed and Motors with Brake & Forced Fan Cooling., Carrying Capacity: 33,000 Lbs, Max. Frontal Loading Center: 5.9”, Max. Side Loading Center: 5.9” ...more

SERIAL. 55-321, MODEL. HD25, CAPACITY. 2500 LBS, TOP TABLE DIAMETER. 50", LOWER TABLE DIMENSION. 36" X 36", POWER TILT. 135 DEGREES YES, ROTATION SPEED VARIABLE. 0.07 TO 0.85 RPM, POWER ROTATION. YES, PENDANT CONTROL. YES, TABLE CENTER HEIGHT FLAT. 34" TO 56", TABLE ADJUSTMENT. 6" INCREMENTS, FORWARD & REVERSING. ...more

35,100/60,000 LB RANSOME EXTRA HEAVY-DUTY WELDING POSITIONER, SERIAL NO 6516814, MODEL 600P, 35,100/60,000 LB RANSOME EXTRA HEAVY-DUTY WELDING POSITIONER, SERIAL NO 6516814, MODEL 600P, HAND HELD PENDANT CONTROL, VARIABLE SPEED POWER ROTATION, FORWARD & REVERSE TILTING (-45/+90 DEGREE), CATALOG :, Table ...more

Used Pandjiris 4,500lb Positioner with Gripper Chuck, Positioner: Used Pandjiris, Model: 45-12 AB, 4,500 Pound Capacity, 48'' x 48'' Table, Variable Speed Rotation, Powered Gear Tilt, Height Adjustable Base, 600A Copper Ground, 480 Volt Input, Hand Pendant and Foot Pedal Controller, 90 Day Warranty ...more

Used Pandjiris 4,500lb Welding Positioner and Gripper Chuck, Positioner: 2025 Year Model, Model 45-12AB, 4,500lb Capacity @ 12'' C.O.G., Variable Speed Rotation, Powered Gear Tilt, Manual Height Adjustment, 600A Copper Welding Ground, Hand Pendant and Foot Pedal Controller, 460 Volt Input, Gripper Chuck: ...more

SERIAL. 76414HD60A.75, MODEL. HD60A, LOAD CAPACITY @ 12". 6,000 LBS, LOAD CAPACITY @ 60". 1,700 LBS, TABLE DIAMETER. 96", ROTATIONAL SPEED VARIABLE.019 TO 1 RPM, ROTATIONAL TORQUE. 72,000 LBS, TILTING TORQUE. 125,000 LBS, TILT RANGE DEGREE. 0 TO 135, DISTANCE FROM FLOOR TO TABLE FLAT. 54-1/2", POWER TILT. YES, PENDENT ...more

YEAR NEW. 1999DRIVE MODEL. JFRD-90IDLER MODEL. JFRI-90NUMBER OF DRIVE ROLLS. 1NUMBER OF IDLER ROLLS. 1CAPACITY (1 DRIVE & 1 IDLER). 90 TONMAXIMUM TURNING CAPACITY. 270,000 LBSDIAMETER RANGE. 12" TO 21'WHEELS. RUBBERWHEEL DIAMETER. 20-1/2"WHEEL WIDTH. 21"FORWARD & REVERSING. YESSPEED. VARIABLECONTROL. ...more

ONE PREOWNED WELDING AUTOMATION 12 TON HEIGHT ADJUSTABLE TANK TURNING ROLLS, MODEL O6R-200, S/N 198 NEW 2014, Load Capacity Driver and Idler 24,000 lbs, Vessel Diameter Range 12" to 144", Operation Speed Range 5 to 50 IPM, Height Adjustment 23" to 39", Traction Effort-Single Drive 3,500 lbs, Power ...more

Make: ALM, Model: ML-2P, Year: 2008, Machine Location: Georgia, Configuration: MHL2P Fixed Headstock / Fixed Tailstock, Control: Pendant controlled, Safety: Solenoid-controlled safety pawls, Vertical travel: 24″ – starting centerline height 36″, Rotator: 9″ powered rotator, 42,000 in-lbs ...more

SERIAL. 75354, DRIVE MODEL. WRD10-351, IDLER MODEL. WRI10, ONE DRIVE. YES, TWO IDLER. YES, CAPACITY 1-DRIVE AND 2-IDLER. 15 TON, DIAMETER OF RUBBER WHEELS. 12", WIDTH OF RUBBER WHEELS. 4", DIAMETER OF TANK TO BE TURNED. 5" MIN TO 144" MAX, DIAMETER RANGE. 6" TO 156", VARIABLE SPEED. 1.4 TO 58 IPM, PENDANT CONTROL. ...more

Used Pandjiris 40,000lb Gear Elevated Welding Posiitoner, Make: Pandjiris, Model: 400-12 VPL, Serial: 13312E00, 40,000lb Capacity @ 12'' C.O.G., 480,000-inch Pounds of Rotational Torque, 1,170,000-inch Pounds of Tilt Torque, 0.01 - 0.50 RPM Variable Speed Range, 0 - 135 Degrees of Tilt, Dual ACME Screw Lift ...more

New Pandjiris 4,500lb Welding Positioner w/ Gripper Chuck, Positioner Model: 45-12AB, 4,500 Pound Capacity @ 12" C.O.G., Variable Speed Rotation, Powered Gear Tilt, Height Adjustable Base, 600A Copper Welding Ground, 460 Volt Input, Hand Pendant Controller, Foot Pedal Controller, 1 Year Warranty, Chuck Model: ...more

Model# BD3000, Load capacity: 3,000 lbs. 6 inch overhung from face of table, 6 inch eccentricity, Rotational motor size: 1/2 HP inverter duty motor, Rotation speed: Variable from 0.1 - 1.75 RPM, Rotation torque: 20,800 in-lbs, Voltage: 120 vac 10 amp 6 foot cord with plug (optional 230/480vac), Chuck: 20 inch ...more

SERIAL. 2213921, MODEL. P200, CAPACITY. 20,000 LBS, AREA OF TABLE. 60" X 604", FLOOR TO TOP OF TABLE. 60" MIN TO 84" MAX, TABLE SPEEDS. VARIABLE VIA SCR CONTROL, TABLE TILTS. 135 DEGREES, TABLE ADJUSTMENT. 6" INCREMENTS, TILT TORQUE. 420,000" LBS, ROTATION TORQUE. 240,000" LBS, POWER TILT. YES, POWER ROTATION. YES ...more

SERIAL DRIVE ROLLS. 81-2188-6SERIAL IDLER ROLLS. 81-281-11MODEL. PIPER 3irCAPACITY 1 DRIVE 1 IDLER. 4000 LBTURNING CAPACITY. 6000 LBS NUMBER OF DRIVES. 1NUMBER OF IDLERS. 1TANK DIAMETER. 3-1/2" TO 40" MAXIMUMROTATION SPEED (VARIABLE). 2 TO 60 IPMRUBBER TIRE DIMENSION. 12" X 2-1/2"PHASE. 1VOLTAGE. 110CONTROL. PENDANT.

New Pandjiris 1,500 lb Positioner with TJ-20 Gripper Chuck, New Positioner: Model 15-4 AB 1,500 Pound Capacity @ 4’’ C.O.G. Variable Speed |.08 – 1.60 RPM Powered Gear Tilt | 0 – 135 Degrees Adjustable Height Base | 26’’ – 38’’ (Center of Table to Floor) ...more

MANUFACTURE PANDJIRIS, MODEL PIPER 3, CAPACITY PER SET IS 4,000 LBS, RUBBER WHEELS, WHEEL SIZE 2 1/2 WIDTH AND 12"DIAMETER, DIAMETER ACCEPTANCE 3 1/2" THRU 40", VARIABLE SPEED DC DRIVE, MOTOR HORSEPOWER 1/4, INPUT 115 VOLTS SINGLE PHASE, HAND PENDENT, PIPE WELDING AND TURNING EQUIPMENT, Optional: ...more

1,100 Lbs Capacity Welding Positioner with Adjustable Rotating Speed, Remote Control with 5 Meter Cable, Digital Speed Indicator, Welding - Chassis (Earth & Clamp Devices), Monitoring Rotation Angle Indicator (For Tilting) and Motors with Brake and Forced Fan Cooling., Carrying Capacity: 1,100 Lbs, Max. Frontal ...more

Pre-Owned Aronson Model HD240A Welding Positioner, Serial Number 76206, Tilt Torque 504,000 Lb / In, Rating Lbs at 12” 24,000 Lbs, Rotation Load Torque 288,000, Tilt 235 Deg in 46 Sec, Brake Motor 7.5 HP, Table Size 54” X 54”, Max Clamping Diameter 70”, Table Thickness 2.5”, Table Flat ...more

SERIAL. WP-2342, CAPACITY. 6000#, DIAMETER OF TABLE. 42", NUMBER OF SLOT IN TABLE. 6, DISTANCE FLOOR TO TOP OF TABLE. 60" MIN TO 78" MAX, FLOOR TO CENTER OF TABLE. 54" MIN TO 72" MAX, HEIGHT ADJUSTMENT. 6" INCREMENTS, POWER TILT. 135 DEGREES, POWER ROTATION. YES, POWER ELEVATION. YES, PENDANT CONTROL. YES, FOOT ...more

SERIAL. 91151, MODEL. HD160-ASDI, ORDER #. 104422, YEAR NEW. 8/1991, CAPACITY. 16,000 LB, TABLE DIAMETER. 52", T-SLOTS IN TABLE. 12, ROTATION SPEED. 0 TO 0.6 RPM, TILTING SPEED. 0 TO 0.8 RPM, TILT RANGE. 0 TO 90 DEGREES, ROTATION TORQUE. 28,000 LB-IN, TILT TORQUE. 300,000 LB-IN, CENTER HOLE DIAMETER. 34", BACKLASH. ...more

MODEL. #HD30-6A, CAPACITY. 3000 LBS, AREA OF TABLE. 30" X 30", SCR VARIABLE SPEED ROTATION. 0 TO 1.13 RPM, POWER TABLE TILT. 0 TO 135 DEGREE, DISTANCE FLOOR TO FLAT TABLE. 34" MIN, 54" MAXIMUM, ADJUSTABLE TABLE HEIGHT. 5" INCREMENTS, ROTATION TORQUE. 18,000 LB, TILT TORQUE. 38250 LBS, PENDANT CONTROL. YES, TILT MOTOR. ...more

NEW PANDJIRIS, MINI PIPER, 115 VOLT INPUT, TURNING CAPACITY. 1,500 lbs., LOAD CAPACITY. 750 lbs., PIPE DIAMETER RANGE. 2" thru 16", SPEED RANGE. 1.0 to 50 ipm, MOTOR HORSE POWER RATING. 1/15 HP, WHEEL DIAMETER. 6", COMBINED WHEEL FACE. 2.0, Weight Capacity of Mini Piper Idler Roll. 750 lbs, Weight ...more

SERIAL.2020-093, MODEL. T18-PWR-16, YEAR NEW. 2020, CAPACITY 1 DRIVE 2 IDLER. 15 TON, WORKING DIAMETER MAXIMUM. 12', WORKING DIAMETER MINIMUM. 8", SPEED RANGE. 5.5 TO 55 IPM VARIABLE, WHEEL FACE. 5", TIRE DIAMETER. 16", WHEEL SPACING. 18",31",44",57", HEIGHT TOP OF TIRE. 20", PHASE.1, MOTOR HORSEPOWER. 1.

The M.B.C. Model BP-2 Welding Positioner is the “workhorse” of our line. The BP-2 is a sturdy, smooth-running positioner that will handle the loads and heavy demands of production MIG and intricate TIG welding. The BP-2 positioner handles up to 200 lbs. balanced load in the horizontal position., 90 Day ...more

INV 8670, WELDWIRE Company of Texas PRO3 Welding Positioner Turntable, C1802 Overlap Controller. This was used in a lab setting. Looks as nice as you will find for a welding positioner. Replacement is over 8K., Year 2018, Model: PRO3, Support Capacity: 640 lbs, Table Speed: 0.6-6 RPM, Table Dia.: O.D. 13.4" (340mm) ...more

Andromat HH3, 6 Bar, 87 PSI, 1030 lb-ft Energy, 500 lb. Shipping Weight, Unused - New in Original Box, 2023.

6 Ton Chain Rotator with 15 Foot Cable Length, Automatic Closing of Chain Levers Upon Loading of Piece, Sturdy Chain Gear Structure, Reducer Mechanisms with Auto Blockage System, Motors with Brakes & Forced Fan Cooling., Load Capacity: 13,000 LBSRotating Capacity (D): 39.4”Working Length (C): ...more

2,200Lbs Capacity Welding Positioner with T-Grooves, Adjustable Rotating Speed, Mechanical Angle Indicator, Welding - Grounding Mechanism, Height Adjustment Capability and Digital Speed Indicator, Carrying Capacity: 2,200 Lbs, Max Frontal Loading Center: 5.9”, Max Side Loading Center: 5.9”, Max Table ...more

6,600 LBS X 10’ Ø Conventional Rotator with Digital Speed Indicator, Manual Diameter Adjustments, “PU” Rollers Absorbing Shocks and Vibrations and Adjustable Rotation Speed, Load Capacity: 6,600 LBS, Load Cap. Per Unit: 3,300 LBS, Minimum Diameter: 7.09", Maximum Diameter: 108.27", Roller ...more

1-Midlands millroom supply 20" cantilever batch-off with batch manipulator and strip cooler batch-off machine. New in 2004. Still installed and can be seen fully operational to a serious buyer. Complete set of drawings and instruction manuals included. 480VAC with 110V control curcuitry.

Make: Dalmec, Model: MGC, Year: 2024, Machine Location: Upon Request, 900lb Capacity, Max working radius: 4000 mm, Max vertical lifting speed: 0,5 meters/second, Vertical lift: 2450 mm.

5 Ton, 8” to 137”Ø Tank Turning Rolls with Push Button Pendant Control., Load Carrying Capacity: 5 Tons, Rotation Capacity: 7.5 Tons, Wheel Center Distance: 15.1”, 26.9”, 38.7”, 62.4”, Vessel Diameter Capacity: 7.9” to 137.8”, Rotation Speed Range: 5.5 to 59 ...more

Model: RDA AHVP100-6 NA Capacity: 11,023 lb (5 tonne) at 6 in (152 mm) C of G and 6 in (152 mm) eccentricity Rotation Speed: 0.07 - 1 RPM Rotation Motor: 1.5 kW inverter-controlled variable-frequency AC-type with fan cooling Rotation Torque: 65,097 in-lbs (7355 Nm) Tilt: 135° forward tilt in 60 seconds Tilt Motor: ...more

Make: Dalmec, Model: MGC, Year: 2024, Machine Location: Upon Request, 900lb Capacity, Max working radius: 4000 mm, Max vertical lifting speed: 0,5 meters/second, Vertical lift: 2450 mm.

Capacity 200 lbs. balanced load in the horizontal position, 100 lbs. balanced load in the vertical position, Table Diameter 12" steel slotted ground plate, Table Thickness 5/16", Table Tilt 10 degrees forward, 90 degrees backwards infinitely variable with hand crank and locking bolt, Power Requirements 110 volt 60 ...more

CM AIR HOIST TMM140A / TMM-140A AIR MANIPULATOR HOIST NEW UNIT STOCK H1855.

New Team Industries 4,000lb Welding Positioner with Gripper Chuck, Positioner:, Model: GEN IV (Gen4), 2025 Year Model, 4,000lb Capacity @ 6'' C.O.G., Hydraulic Powered Elevation, Hydraulic Powered Tilt, 0 - 115* of Tilt, Variable Speed Roation, 0.5 - 3.52 RPM, 30,000 Inch Pounds of Rotational Torque ...more

DALMEC PEC 375 MATERIAL LIFT/MANIPULATOR: with 360 Manipulation possibilities: -- :Highly versatile Vacuum/Grabbing Lifting Device; designed for handling diverse loads such as stone, large sheets of glass, steel, plastic, plywood, and particle board. -- Special configuration designed to rotate loads 180; hand-geared ...more