Buy or Sell Your Manipulators

MODEL: 3-1PR, Capacity. 1 Ton, Wheel Diameter. 12", Max. Distance Between Roller Heads. 132", 4 Steel Wheels, 2 Rubber Wheels, Variable Speed, Adjustable Width 3 Settings, Mounting Track for Adjusting Tank Rolls for Length of Part, 156" Long, Freight charges are not included in sale price. Freight scheduling and costs ...more

HORIZONTAL EXPANDED MADREL, MANDREL SIZE. 22" DIAMETER X 9" WIDE, EXPANSION RANGE. 1/2", MANDREL SPEED. VARIABLE TO 150 RPM, MANDREL EXPANSION. MANUEL, MAX SWING. 38" DIAMETER, CONTROLS START STOP FORWARD REVERSE VARIABLE SPEED CONTROL, OVERALL DIMENSIONS:. 60" HIGH X 24" WIDE X 48" F-B, APPROIMATE WEIGHT. 500 LBS.

8,000LB HEIGHT ADJUSTABLE, HD2L-100/150, IDLER 4,000LB, PIPE DIAMETER RANGE 2" - 36", HEIGHT RANGE 28" - 40", 120 VOLT INPUT, V-GROOVE STEEL CASTER WHEELS, FOR/REV FOOT PEDAL.

PROFAX TANK TURNING ROLLS MODEL # TR-5000, 5000 LB. CAPACITY, 4"- 60" DIAMETER ACCEPTANCE, 0 TO 100 IPM ROTATION SPEED, 115 V, HIGH FREQUENCY PROTECTED, STANDARD FORWARD/REV. FOOT CONTROL, SHIPPING WEIGHT 430 LBS..

Used Teledyne Readco 2,500lb Positioner, Model: UPC-25, Serial: 10518, 2,500lb Capacity, 42'' Round Table w/ 1 1/2'' Center Thru Hole, Variable Speed Rotation, Powered Gear Tilt, Pace Master Drive Controller, Hand Pendant and Foot Pedal Controllers, 460 Volt Input.

Ransome 50 Ton Tank Turning Idler Roll, Model 50TMIR, Serial # 6728475, Asset # 14786, Weight Capacity for Set 50 Tons, Diameter Range 6” – 28”, Wheel Center to Center 21”, Wheel Diameter 16”, Wheel Rubber Width 7 1/2”, Overall Dimensions 20” x 49”, Height 22″ ...more

New WeldWire 120-Ton Turning Roll Set, Model: WWRD-120 / WWRI-120, 240,000lb Capacity ( 1 Driver & 1 Idler ), 360,000lb Capacity ( 1 Driver & 2 Idler ), 8'' - 18ft Diameter Range, 1.2 - 38 IPM Variable Speed Range, 460 Volt Input, Hand Pendant Controller, 1 Year Warranty.

New Webb 40-Ton Turning Roll Set, Model: R1000 (Set), Driver: R1000-PWR20, Idler: R1000-IDL20, 1 Driver / 1 Idler : 80,000lb Capacity, 1 Driver / 2 Idler : 100,000lb Capacity, 6'' - 20 ft Diameter Range, 14'' of Surface Contact on Wheel (Great for Thin Wall Vessels), 7 - 58 IPM Variable Speed Range ...more

New Pandjiris 3,000 lb Positioner (Adjustable Height Base), New Positioner: Model 30-6 AB 3,000 Pound Capacity @ 6’’ C.O.G. Variable Speed |.046 – 1.40 RPM Powered Gear Tilt | 0 – 135 Degrees Adjustable Height Base | 28’’ – 42’’ (Center of Table to Floor) ...more

New Pandjiris 3,000 lb Positioner (Adjustable Height Base), New Positioner: Model 30-6 AB 3,000 Pound Capacity @ 6’’ C.O.G. Variable Speed |.046 – 1.40 RPM Powered Gear Tilt | 0 – 135 Degrees Adjustable Height Base | 28’’ – 42’’ (Center of Table to Floor) ...more

New Pandjiris 6,000lb Welding Positioner, Model: 60-12AB, 6,000lb Capacity @ 12'' COG, 48'' x 48'' Table, Variable Speed Rotation, Powered Gear Tilt, Manual Height Adjustable Base, 600A Copper Welding Ground, 460 Volt Input, Hand Pendant Controller, 1 Year Warranty, Optional Accessories Model ...more

POWER DRIVE ROLL:, MODEL. WER-90, YEAR NEW. 2011, CAPACITY. 90 TON, CAPACITY W/ IDLER ROLL. 180 TON, SUITABLE DIAMETER. 8" TO 216" (18'), DIAMETER OF WHEEL. 18", ROTATION SPEED. 4 TO 40 INCHES PER MINUTE, MOTOR POWER. 7.5 HP, IDLER ROLL:, MODEL. WER-90-I, YEAR NEW. 2011.

RANSOME 10,000 LBS HEADSTOCK, MODEL- 5H, 1975 YEAR MODEL, 47-1/2'' TABLE WITH A 6'' THRU HOLE, ADJUSTABLE HEIGHT, CENTERLINE MIN. 35-1/2" MAX. 73-1/2", 47" CENTERLINE IN THESE PHOTOS, INPUT 240/440 VOLTS, S/N 6819266.

Used Pandjiris 3,000lb Welding Positioner, Model: 30-12 AB, Serial: 400-9992, 3,000lb Cpacity @ 12'' COG, 48'' Round Table (with T-Slots), 2 1/4'' Cull Center Thru Hole, Variable Speed Roation, Powered Gear Tilt, Height Adjustable Base, Hand Pendant Controller, 220 Volt Input, 30 Day Warranty.

SERIAL. 77330, MODEL. HD100CS, YEAR NEW. 1977, CAPACITY. 10,000 LBS, TABLE AREA. 48" X 48", SPEED. 1.2 PRM CONSTANT, TABLE TILTS. 135 DEGREES, HEIGHT ADJUSTMENT. 6" INCREMENTS, CENTER LINE VERTICAL POSITION. 30" MIN TO 66" MAXIMUM, TABLE ROTATES. 360 DEGREES, FORWARD & REVERSING. YES, JOG CONTROL. YES, TILT MOTOR. ...more

MINIMUM SUITABLE DIAMETER.: 750mm, MAXIMUM SUITABLE DIAMETER.: 4800mm, ROTATION CAPACITY.: 60 TONS, LOADING CAPACITY.: 60 TONS, WHEEL DIAMETER.: 450mm, MINIMUM ROTATION SPEED.: 100 mm/MIN, MAXIMUM ROTATION SPEED.: 1,000 mm/MIN, VOLTAGE.: 240, Machine Type.Adjustable Automatic Case Taper Manufacturer.IRIZAR Model.N/A ...more

LJ Pipe Turning Rolls - Adjustable Height, Model- HD2L-100/150, Capacity- 8,000 Pounds, Pipe Daimeter Range- 2'' - 36'', Heigh Range- 28'' - 40'', Input 120 Volt, Variable Speed- 8 - 80 IPM, Foot Pedal Included.

New Koike Aronson 5,000lb Positioner and Chuck, Positioner: New Koike Aronson, Model: MD-50 5,000lb Capacity @ 8’’ C.O.G. 40,000 Inch Pounds of Rotational Torque 67,500 Inch Pounds of Tilt Torque 36’’ x 36’’ Table Hand Pendant Controller Foot Pedal Included 480 Volt Input 2 Year ...more

Used LJ Welding 5,400lb Welding Positioner, Model: ARC-30-P-200, 5,400lb Capacity, Chuck Model: T-30 Gripper Chuck, 2'' - 30'' Pipe Diameter Range, Vertical Height Adjustment, 33'' - 69'' Height Range ( 4'' Increments), Variable Speed Rotation, 460 Volt Input, Hand Pendant ...more

SERIAL NUMBER. 352494, MODEL. BPRR 15, SET DOWN WEIGHT CAPACITY. 15 TON, TURNING CAPACITY. 45 TON, DIAMETER CAPACITY. 8" TO 8', RUBBER WHEELS. 7" WIDE X 20" DIAMETER, VARIABLE SPEED. 1.5 TO 59 IPM, VOLTAGE. 230 OR 460.

MODEL. PR100, CAPACITY TURNING. 50 TON, CAPACITY 1 DRIVE & 1 IDLER. 17 TONS SUPPORT, WIDTH OF RUBBER WHEEL. 14", DIAMETER RANGE. 12" MIN. TO 96" MAXIMUM, TURING SPEEDS (VARIABLE). 2.8 - 66.2 IPM, FORWARD & REVERSE. YES, PENDANT CONTROL. YES, HORSEPOWER MAIN MOTOR. 13.

Ransome 150-Ton Micarta Turbine Rotators, Model: 150PRM/150IRM, s/n: 6626647 / 6726648, 300,000 Pound Capacity 12’’ x 22’’ Micarta Wheels 109’’ Tall (Top of Wheel to Floor) 97 ¼’’ Tall (Center of Wheel to Floor) 79’’ Stand Height 460 Volt ...more

14,000 Lb. Cap. ARONSON Tank Turning Roll and Idler Model WRD/WRI 14… S/N 7033… New 1970 Max. capacity w/(1) driver… idler. 7… tonsVariable turning speed range. 2 to 50 IPMTire diameter. 11"Distance Between Centers (Adjustable). 14" - 62"Wheel Width. 8" :- (1) Power ...more

New WeldWire Co. 5-Ton Turning Roll Set, Model: WWRD-5 / WWRI-5, 1 driver and 1 Idler makes a set., 10,000 Pound Capacity (1 Driver, 1 Idler) 6’’ – 13 ft Diameter Range 14’’ Polyurethane Wheels (3’’ wide face) ½ Horsepower Motor (Variable Speed) 45 I.P.M. Max Speed 120 ...more

Used Pandjiris 30-Ton Turning Rolls, Model: MM-30/15-T, 60,000 Pound Capacity, 12'' - 16ft Diameter Range, 1.7 - 50.2 I.P.M. Variable Speed Range, 2 HP Drive Motor, 10'' Wheel Face, 460 Volt Input, Hand Pendant Controller, 90 Day Warranty.

TABLE 84" SQUARE, VOLTS 440 3-PHASE, CAPACITY 50,000# @ 12" C.G., SHIPPING WEIGHT 31,000#, CENTER OF TABLE TO FLOOR MINIMUM 50-3/4", CENTER OF TABLE TO FLOOR MAXIMUM 83-3/4", FLOOR PRINT 96-1/2" X 108", HOLLOW SPINDLE 12-1/8", CONTROL HAND PENDANT, TILT CONSTANT SPEED, ROTATION VARIABLE SPEED, CONSTANT SPEED GEARED ...more

2018 DEMMELER M4000_7.0.1_Standard_UL Welding Positioner #7660 #1, -Product, -Large work area, -Low installation height, -Unique swivel range up to 180, -Supports working ergonomically, -Greater flexibility, -Improved workplace safety, -Increased productivity, Technical data:, Bearing load: 4000, M4000, A = min: 747 ...more

SERIAL. 1754, MODEL. WP-6, CAPACITY. 6000 LB @ 12", CAPACITY. 3470 LB & 36", TOP TABLE AREA. 72", SUB TABLE AREA. 42" X 42", POWER TILT. 135 DEGREES, ROTATION SPEED VARIABLE. ALLEN BRADLEY, POWER ROTATION. YES, TABLE CENTER HEIGHT FLAT. 60" TO 96", TABLE CENTER TO BASE. 48" VERTICALLY, TABLE ADJUSTMENT. 6" ...more

1,000 LB. RANSOME WELDING POSITIONERMODEL 10-P… S/N 149128… YEAR 1969 Capacity. 1,000 lbsRotation torque. 6,000 in. lbs.Tilt Torque. 13,125 in. lbsTable diameter.″0"Table RPM min. 0.5Table RPM max. 2Tilt range. 0 - 135 degreesVertical height adjustment. 18" (powered)Motor. 230 / 460 ...more

MODEL. WWRD-20, DRIVE ROLLS. 1, CAPACITY. 20,000 LBS PER UNIT, OVERALL CAPACITY. 40,000 LBS, TANK DIAMETER. 6" TO 13', MOTOR. 1.5 HP, IDLER ROLLS. 1, MODEL. WWRI-20, CAPACITY. 20,000 LBS EACH.

2012 DALMEC Manipulator Process Pipe Cell (PPC) is a compact and portable manipulator with programmable oscillation designed to revolutionize pipe welding productivity. Versatile and compatible with various welding power sources and wire feeders, including Miller PipeWorx and Lincoln Power Wave systems, PPC allows for ...more

WeldWire Co 12,000 Pound Floor Turn Table, New with 1 Year Warranty, Model: WWFT-12, 12,000 Pound Capacity 24 ¼’’ Table Height 60’’ Diameter Table 32,400-inch Pounds of Rotational Torque 0.04 rpm – 1.1 rpm Rotational Speed Range ¾ h.p. Motor Center of gravity – ...more

Used Pandjiris 40,000lb Welding Positioner, Make: Pandjiris, Model: 400-12AB, Serial: 22239E00, Year: 2018, Machine weight 22,975lbs., Capacity: 40,000 lbs. @ 12 '' COG, Table: 84'' Round Table, Speed Range: 0.01 - 1.4 RPM, Tilt: 0 - 135 Degrees of Tilt, Height Range: 70'' - 114'' ...more

MODEL #: WP-10A, SERIAL #: WP-3222, 10,000 CAPACITY @12" C.G., 135 DEGREE CONSTANT SPEED ROTATION, VARIABLE SPEED ROTATION TABLE TILTS 56" x 56" SQUARE TABLE WITH SLOTS, 53" - 90" RANGE OF POWERED ELEVATION, 20' PENDANT CONTROL, 460/3/60, 10' LR x 6' FB x 9'3" TALL DIMENSIONS, REBUILT CONDITION.

SERIAL. 800-34774, MODLE. TIR-40, CAPACITY. 8000 LBS, 1 DRIVE ROLL. YES, 1 IDLER ROLLS. YES, DIAMETER RANGE. 4" TO 144", SPEED VARIABLE. 5.0 TO 105 IPM, DIAMETER OF WHEELS. 12", WIDTH OF WHEELS. 10-7/8", WHEEL HEIGHT. 16" & 26-11/16", PHASE. 1, VOLTAGE. 115.

Used Ransome 120,000lb Welding Positioner, Model: 1200-P, Serial: 7514240, 120,000lb Capacity @ 12'' C.O.G., 2,400,400 Inch Pounds of Rotational Torque, 3,660,000 Pounds of Tilt Torque, 84'' x 84'' Table, 0.01 - 0.4 Variable Speed Range, 460 Volt Input, Hand Pendant Controller, Warranty ...more

New Koike Aronson 3,000lb Positioner with Chuck, Positioner: New, Make: Koike Aronson, Model: MD-30, 3,000lb Capacity @ 6'' C.O.G., 0.1 - 2 RPM Variable Speed Range, 30'' x 30 Square Table, Powered Gear Tilt, Height Adjustable Base, 120 Volt Input, Hand Pendant and Foot Pedal Controller, 2 Year ...more

SERIAL. 2753MODEL. 1200CAPACITY. 1200 LBS1 DRIVE ROLLS. YES1 IDLER ROLLS. YESDIAMETER RANGE. 1-1/2 TO 17" MAXIMUMTURNING SPEED. 0 TO 35 IPMDIAMETER OF WHEELS. 6" X 2"RUBBER WHEEL. YESFORWARD & REVERSING. YESELECTRIC FOOT PEDAL. YESPHASE. 1VOLTAGE. 110MOTOR HORSEPOWER. 3/4.

WeldWire Co. 10-Ton Turning Roll Set (RENTAL/Rent To Own), Model: WWRD-10 / WWRI-10, 1 Driver, 1 Idler makes a set. Extra Idlers Available, 20,000 Pound Capacity (1 Driver, 1 Idler) 30,000 Pound Capacity (1 Driver, 2 Idler) 6’’ – 13 ft Diameter Range 12’’ Rubber Tires ¾ Horsepower ...more

Maximum load capacity table in the flat horizontal position 550 pounds., Maximum load capacity table tilted 90 degrees vertical position 300 pounds @ 4 inch CG., 500 AMP Welding Current Conduction., Table tilting 0 to 90 degrees forward., Table Diameter 14 inches with centering grooves 3 tee slots and 3 slots. ...more

6,000 LB NEW WELDWIRE FLOOR TURN TABLE, MODEL WWFT-6, LOAD CAPACITY 6,000 LBS, CENTER OF GRAVITY 12", ROTATIONAL TORQUE 30,521, VARIABLE SPEED HP 3/4 HP AC, VARIABLE SPEED RPM.04-1.3RPM, CONSTANT SPEED HP 3/4 HP AC CONSTANT SPEED RPM 1/3 RPM, ELECTRICAL POWER 110 VOLTS STANDARD, CONTROL VARIABLE SPEED ...more

Used Ransome 40,000lb Positioner, Model: 400P, Serial: 2420374, 40,000 Pound Capacity @ 12'' C.O.G., ROTATION ONLY (Variable Speed), NO TILT, 84'' Round Table with 6'' Center Thru-Hole, 79 1/2'' Center of Table to Floor, 107'' L x 80'' W Foot Print, 460 Volt Input, Hand ...more

New Pandjiris 3,000 lb Positioner With Gripper Chuck, New Positioner: Model 30-6 AB 3,000 Pound Capacity @ 6’’ C.O.G. Variable Speed |.046 – 1.40 RPM Powered Gear Tilt | 0 – 135 Degrees Adjustable Height Base | 28’’ – 42’’ (Center of Table to Floor) ...more

SERIAL. 800-7161-1, MODEL. 30-6 MVRWT, LOAD CAPACITY. 3,000 LBS MAXIMUM, AREA OF TABLE. 36" X 36", FLOOR TO TABLE TOP IN FLAT. 34" TO 48" MAXIMUM, ROTATIONAL SPEED. VARIABLE, ROTATIONAL TORQUE. 18,000 INCH POUNDS, FORWARD & REVERSING. YES, TILT RANGE. 0 TO 135 DEGREES, MOTORIZED, TILT TORQUE. 35,250 INCH POUNDS ...more

THE PANDJIRIS MM-15/5-T TURNING ROLLS ARE PROVIDED AS A SET OF THREE POWER ROLLS FOR FABRICATING AND WELDING APPLICATIONS. THE POWER ROLL UNIT HAS A CAPACITY OF 15 TONS FOR TURNING AND 5 TONS FOR SUPPORT, OPERATING ACROSS A SPEED RANGE OF 2.1 TO 63.5 IPM. TECHNICAL INCLUDE A TURNING CAPACITY OF 30,000 LBS, A LOAD ...more