Frank Bacon Machinery Sales
Warren, MI 48091
Platinum Level Dealer
Surplus Record Dealer Since 1956
Contact
Sales Team
About
Frank Bacon Machinery Sales is recognized as having the world's largest inventory of surplus hydraulic and electro-mechanical tensile strength testers, yield strength testers, flexural strength testers and compression testers. They recondition, retrofit and upgrade these materialtesters for stress, strain, yield strength, flexural strength, and proof load testing of any type of material. All reconditioned/retrofitted/certified testers have a 30-day full refund guarantee and 12 month warranty.
Products & Services
- Comparators
- Inspection Equipment
- Laboratory Equipment
- Pharmaceutical Equipment
- Rebuilding/Retrofitting
- Testing/Inspection Equipment
499 listings in 23 categories
10" Buehler #AbrasiMet-250 Mdl 10-10106-260 manual abrasive cutter, 10" wheel capacity, 1.25" wheel arbor
Category: Abrasive Saws
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Buehler
Model: ABRASIMET-250
Buehler AbrasiMet 250 Manual Abrasive Cutter Model 10-10106-260, AbrasiMet 250 Manual Abrasive Cutter Model 10-10106-260 Dimensions Without Stand : 28" x 29" x 22.5Electrical: 200-240/60HzWheel Capacity: 10-inch (254mm)Wheel Arbor Size: 1.25" (32mm)Wheel Speed: 50Hz-2800rpm 60Hz-3400rpmMaximum Cutting Capacity: ...more
MTS #204.51, Hydraulic Actuator, 3.3kip, 6" Dynamic / 7.2" Static, 204.51
Category: Actuators
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 204.51
3.3KIP MTS 204.51 Hydraulic Actuator MTS Model 204.51 : Model: 204.51 S/N: 268 Assembly Number: 097774-05 Force: 3.3 KIP Area: 1.17 in^2 Stroke: 6” Dynamic / 7.2” Static : Internal LVDT Note: MTS/MOOG Servo Valves Available in 1-15 GPM Flow Rates for Additional Cost Price: FOB Warren, MI Reconditioned with ...more
MTS #204.61, hydraulic actuator, 11 KIP (50kN), MOOG 76-203 servo valve, internal LVDT
Category: Actuators
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 204.61
11KIP (50kN) MTS Model 204.61 Hydraulic Actuator, Used, 11 KIP (50 kN) Capacity MTS, Model 204.61 Hydraulic Actuator, Model: 204.61S/N: 588Assembly Number: 094078-05Force: 11 KIP (50 kN)Area: 3.73 in^2 (24.06 cm^2)Stoke: 6" Dynamic 6.80" Static : MTS Model 294.11 Hydraulic Service Manifold with Ports for Two Servo ...more
MTS #204.61, Hydraulic Actuator, 11 KIP (50kN), 6" dynamic stroke, 6.8" static, MTS hydraulic service manifold w/ 2 servo valves
Category: Actuators
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 204.61
11KIP (50kN) MTS Model 204.61 Hydraulic Actuator, Used, 11 KIP (50 kN) Capacity MTS, Model 204.61 Hydraulic Actuator, Model: 204.61S/N: 422Assembly Number: 094078-05Force: 11 KIP (50 kN)Area: 3.73 in^2 (24.06 cm^2)Stoke: 6" Dynamic 6.80" Static : MTS Model 294.11 Hydraulic Service Manifold with Ports for Two Servo ...more
MTS #204.63, hydraulic actuator, 22 KIP (100kN), 6" dynamic/6.60" static stroke, reconditioned
Category: Actuators
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 204.63
22KIP (100kN) MTS Model 204.63 Hydraulic Actuator, Model: 204.63S/N: 1082Assembly Number: 086011-05Force: 22 KIP (100 kN)Area: 7.54 in^2 (48.65 cm^2)Stoke: 6" Dynamic 6.60" Static : MTS Model 294.12 Hydraulic Service Manifold Hi & Low Pressure Solenoids Servo Valve Ports for Two MTS/MOOG Servo Valves (Servo Valves ...more
MTS #204.71, hydraulic test actuator, 55 KIP (250kN), 6" dynamic/6.6" static stroke, internal LVDT
Category: Actuators
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 204.71
55KIP MTS Model 204.71 Hydraulic Test Actuator, MTS Model 204.71:Force: 55 KIP (250 kN)Area: 18.53 in^2Stroke: 6” Dynamic / 6.6" Static : Dual MTS MOOG Servo Valves Internal LVDT MTS Hydraulic Service Manifold with On/OFF Solenoid Valve Two MTS Piston Accumulators FOB Warren, MICleaned, Serviced and Cycled90 Day ...more
Frank Bacon Machinery Sales has 13 more
listings in Actuators.
16" x 18" x 48" 90 Degree Angle Plate, (6 available)
Category: Angle Plates
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
90 Degree Angle Plate 16" x 18" x 48" (1) Used 90 Degree Angle Plate., 90 Degree Angle Plate, Over all Dimensions (W x D x H): 16" x 18" x 48", Face Mount Dimensions (W x D x H): 4.5" x 5" x 47", Thread on Mounting Holes: 3/4 in. - 10, Number of mounting Holes: 18, *4 Available, FOB Warren, MI, 30 Day Satisfaction ...more
43" x 26" x 85" 90 Degree Angle Plate, (4 available)
Category: Angle Plates
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
90 Degree Angle Plate 43" x 26" x 85" (1) Used 90 Degree Angle Plate., 90 Degree Angle Plate, Dimensions (W x D x H): 43" x 26" x 85", Face Mount Dimensions (W x D x H): 4.5" x 3.5" x 84", Thread on Mounting Holes: 3/4 in. - 10, Number of Mounting Holes: 41, *4 Available, FOB Warren, MI, 30 Day Satisfaction Guarantee ...more
Leco #BG-20, Heavy Duty Grinding Belt Grinder
Category: Belt Grinders
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Leco
Model: BG-20
Leco BG-20 Heavy Duty Grinding Belt Grinder (1) USED Leco BG-20, Model 800-500, 4" Motorized Heavy Duty Course Grinding Belt Grinder S/N: 3034, Leco BG-20 Model 800-500, Belt Width: 4", Work Piece Table: 4" x 9", Motor H.P.: 1/2, Electrical Requirements (V, AMP Hz, Ph): 220, 7.5, 50, 1, EQUIPPED WITH:, Adjustable Belt ...more
5 Ton, Advantage Chiller #MK-5A-41HF, 12 GPM, 5 HP, 25 gallon tank, S/N 84379
Category: Chillers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Advantage
Model: MK-5A-41HF
5 Ton Advantage Chiller Model MK-5A-41HF, Used Advantage Engineering Model MK-5A-41HF 5 Ton Chiller System.: Model: MK-5A-41HFS/N: 84379Compressor: 5 HPPump HP / Flow: 2 HP / 12 GPMRefrigerant: R-22Tank (gal.): 25Fittings (FNPT/in.): 1.25FLA (amps): 19.3Electrical Requirements: 460 / 3 / 60Overall Dimensions: ...more
5 Ton, Koolant Koolers #KV5000, chiller, R-22 refrigerant, 60000 BTU, 15-40 GPM
Category: Chillers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Koolant Koolers
Model: KV5000
5 Ton Koolant Koolers KV5000 Chiller, Model: KV5000Serial Number: 28348Compressor HP: 5Pump HP: 2Refrigerant Type: R-22 Lbs. Ref. 10Power: 460V, 3Ph, 17.4ABTU Capacity: 60,000Flow GPM: 15-40 Indoor InstallationWeight: 950 lbs FOB: Warren, MI 4809130 Day Satisfaction Guaranteed Return Privilege, | #13218-01, DOWNLOAD ...more
10 Ton, Koolant Koolers #LKV10000PR-NF-AT-FILT-SI, chiller, R407c refrigerant
Category: Chillers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Koolant Koolers
Model: LKV10000PR-NF-AT-FILT-SI
10 Ton Koolant Koolers LKV10000PR-NF-AT-FILT-SI Chiller, Model: LKV10000PR-NF-AT-FILT-SISerial Number: 33480Compressor HP: 10Pump HP: 2Refgrigerant R407C Lbs 18Power: 380-460V, 50-60Hz, 3Ph, 27A Note: Came in with 20 GPM MTS 505.20-G2 FOB: Warren, MI 4809130 Day Satisfaction Guaranteed Return Privilege, | #Koolant ...more
1125 lbf. (5kN) Frank Bacon #FB-EMS-TT, Single Column Tension and Compression Testing Machine with Precision Load Cell, new
Category: Compression Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Frank Bacon
Model: FB-EMS-TT
NEW 1,125 lbf (5kN) Single Column Frank Bacon Model FB-5EMS-TT, NEW 1,125 lbf (5kN) Capacity Single Column Frank Bacon Tension and Compression Testing Machine with Precision Load Cell., Model FB-5EMS-TT, Tension Testing Opening (Less Tooling): 38", Compression Testing Opening (Less Tooling): 38", Testing Stroke: 38" ...more
1125 lbf. (5kN) Instron #4201, electro mechanical Unispace tension & compression testing machine, 48" test opening, reconditioned, retrofitted
Category: Compression Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: 4201
1,125lbf (5kN) Instron 4201 Unispace Testing Machine, Reconditioned 1,125 lbf (5 kN) Capacity Instron Model 4201 Electro-Mechanical Unispace Tension and Compression Testing Machine updated with New 5 kN Load Cell and Precision Drive System, Instron Model 4201, Tension Testing Opening (Less Tooling): 48", Compression ...more
1125 lbf. (5 kn) Instron #4201 Electro-Mech Unispace tension & compression testing
Category: Compression Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: 4201
1,125lbf (5kN) Instron 4201 Unispace Testing Machine Reconditioned 1,125 lbf (5 kN) Capacity Instron Model 4201 Electro-Mechanical Unispace Tension and Compression Testing Machine updated with New 5 kN Load Cell and Precision Drive System S/N: 1195, Instron Model 4201, Tension Testing Opening (Less Tooling): 48" ...more
1125 lbf. (5kN) Instron #4465, Table Top Precision Two Ball Screw Electro-Mechanical Tension and Compression Testing Machine Frame
Category: Compression Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: 4465
1,125lbf (5kN) Instron 4465 (1) Reconditioned 1,125 lbf (5 kN) Capacity Instron, Model 4465, Table Top Precision Two Ball Screw Electro-Mechanical Tension and Compression Testing Machine Frame., Instron 4465, Tension Testing Opening (Less Tooling): 48", Compression Testing Opening (Less Tooling): 48", Distance Between ...more
1125 lbf. (5kN) Instron #5565/4465, tensile & compression testing system, 48" test opening, 16" btwn columns/screws, reconditioned, retrofitted
Category: Compression Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: 5565/4465
1,125lbf (5kN) Instron Model 5565 / 4465 Tensile & Compression Testing System, (1) Reconditioned 1,125 lbf (5 kN) Capacity Instron, Model 5565/4465, Table Top Precision Two Ball Screw Electro-Mechanical Tension and Compression Testing Machine Frame, Tension Testing Opening (Less Tooling): 48", Compression Testing ...more
Frank Bacon Machinery Sales has 57 more
listings in Compression Testers.
10" Carbon Steel, Cut Off Saw, 1.97" max. round sample size, 2 HP cutting motor, 10-gallon recirculating tank, 220 Volt, 3PH
Category: Cutoff Saws
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
CS Cut off Saw, NEW CS Abrasive Cutting Machine · 2 HP Cutting Motor· Max Round Sample Size: 50mm· 220V, 3 Phase, 60 Hz· Feed Method: Auto / Manual· Cut-Off Wheel Size: 10” (255mm) / 32mm arbor· 10 Gallon Recirculating Tank· T-Slot table with ...more
Leco #VC-50 Model 800-900, Cut Off Saw
Category: Cutoff Saws
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Leco
Model: VC-50
Leco VC-50 Model 800-900 Cut Off Saw (1) USED Leco VC-50 Model 800-900 Vari/Cut Precision Diamond Cut-Off Saw S/N: 613, Leco Model 800-900, Wheel Speed-Variable: 0-500 RPM, Wheel Size: 5", Approximate Dimensions (W x D x H): 14" x 16" x 13½", Weight (lbs.): 50, Electrical: 115/230, 60, 1, Tachometer Display ...more
Magnaflux #SB-1416, Industrial Demagnetizer, 14" x 16" Coil Opening, 12,000 Amps, Cycle Timer
Category: Demagnetizers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Magnaflux
Model: SB-1416
Magnaflux SB-1416 Industrial Demagnetizer, Magnaflux SB-1416 Industrial Demagnetizer, Coil Opening(W x H): 14" x 16" Coil Ampere Turns, Empty(Amps): 12,000 Duty ON/OFF Cycle(Sec): 30 / 30 Approximate Overall Dimensions(W x D x H): 48" x 30" x 58" Approximate Weight(lbs): 625 Electrical Requirements(V,Hz,Ph,A): 460 ...more
Magnaflux #SB-911, Industrial Demagnetizer, 9" x 11" Coil Opening, 8,800 Amps, Cycle Timer
Category: Demagnetizers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Magnaflux
Model: SB-911
Magnaflux SB-911 Industrial Demagnetizer, Magnaflux SB-911 Industrial Demagnetizer, Coil Opening(W x H): 9" x 11" Coil Ampere Turns, Empty(Amps): 8,800 Duty ON/OFF Cycle(Sec): 30 / 30 Approximate Overall Dimensions(W x D x H): 20" x 20" x 52" Approximate Weight(lbs): 350 Electrical Requirements(V,Hz,Ph,A): 440, 60, 1 ...more
30000 lb. Detroit #G2-S, Ductility Tester
Category: Ductility Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Detroit
Model: G2-S
30K Detroit G2-S Ductility Tester Reconditioned 30,000 lbf Capacity Detroit, Model G2-AS. S/N: 546, Detroit Model G2-S, Capacity (Lbs): 30,000, Range (s) (Lbs): 0 – 6K, 0 – 30K, Maximum Specimen Thickness: 250", Approximate Dimensions (W x D x H): 29 ½" x 26" x 30", Approximate Weight (Lbs): 525 ...more
30000 lb. Tinius-Olsen #A-12, Sheet Metal Ductility Testing
Category: Ductility Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Tinius-Olsen
Model: A-12
30K Tinius Olsen A-12 Sheet Metal Ductility Testing, (1) USED, 30K Tinius Olsen Ductomatic, Model A-12, Sheet Metal Ductility Testing Machine, Upgraded with a New Digital Display Microprocessor. S/N 154833, Tinius Olsen Ductomatic, Capacity (lbs.): 30,000, Range (lbs.): 0-30,000, Maximum Specimen Thickness:.375" ...more
30000 lb. Tinius-Olsen Olsen Ductomatic #A-12, Ductility Testing Machine
Category: Ductility Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Tinius-Olsen
Model: A-12
30K Tinius Olsen Ductomatic A-12 Ductility Testing Machine, (1) USED, 30,000 lbf Capacity Tinius Olsen Ductomatic, Model A-12, Sheet Metal Ductility Testing Machine, Upgraded with a New Digital Display Microprocessor. S/N 107696, Tinius Olsen Ductomatic Model A-12, Capacity (lbs): 30,000, Range (lbs): 0-30,000 ...more
30000 lb. Tinius-Olsen Olsen Ductomatic #A-12, Sheet Testing Machine
Category: Ductility Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Tinius-Olsen
Model: A-12
30K Tinius Olsen Ductomatic A-12 Sheet Testing Machine, (1) USED, 30K Tinius Olsen Ductomatic Model A-12, Sheet Metal Ductility Testing Machine, Upgraded with a New Digital Display Microprocessor., Tinius Olsen Ductomatic A-12, Capacity (lbs): 30,000, Range (lbs): 0-30,000, Maximum Specimen Thickness:.375" ...more
30000 lb. Tinius-Olsen Ductomatic, Ductility Testing
Category: Ductility Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Tinius-Olsen
30K Tinius Olsen Ductomatic Ductility Testing, (1) USED 30,000 lbf Capacity Tinius Olsen Ductomatic, Model A-12, Sheet Metal Ductility Testing Machine. S/N 151101, Tinius Olsen Ductomatic Model A-12, Capacity (lbs.): 30,000, Range (s) (lbs.): 0 – 30K (200 lbf), 0 – 6K (50 lbf), Maximum Specimen ...more
Frank Bacon Machinery Sales has 3 more
listings in Ductility Testers.
8.6" width x 8.6" D x 22.8" H Environmental Test Chamber for universal testing machines, new
Category: Environmental Chambers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
New FB-280DT Environmental Test Chamber for Universal Testing Machines New FB-280DT Environmental Test Chamber for Universal Testing Machines, • Temperature Range: -80°C up to +280°C, • Stainless Steel Body, • Internal Dimensions, (w x d x h) 220 x 220 x 580mm (8.6 x 8.6 x 22.8 in), • ...more
9.4" width x 9" D x 26" H Instron #3119-409, temperature test chamber for elevated & cooled testing, +480°F
Category: Environmental Chambers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: 3119-409
Instron Model 3119-409 Test Chamber, (1) USED Instron, Model 3119- 405-21, Temperature Test Chamber for Elevated and Cooled Testing S/N 0002228, Instron Model 3119, Temperature Range (°F):, Heating: Ambient to +480, Set Point Accuracy (°F): +/- 4, Approximate Inside Dimensions (W x D x H): 9.4" x 9" x 26" ...more
9.4" width x 9" D x 26" H Instron #3119-409, test chamber, Stainless steel interior, chamber door w/viewing window & interior light
Category: Environmental Chambers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: 3119-409
Instron Model 3119-409 Test Chamber Instron Model 3119 : Temperature Range (°F): Heating: Ambient to +480 Cooling: Ambient to -95 Set Point Accuracy (°F): +/- 4 Approximate Inside Dimensions (W x D x H): 9.4" x 9" x 26" Approximate Outside Dimensions (W x D x H): 13.8" x 23.6" x 28.9" Approximate Chamber ...more
12" width x 12" D x 12" H MTS #651.06B-03, environmental test chamber, Stainless steel interior, chamber door w/window & interior light
Category: Environmental Chambers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 651.06B-03
15" width x 15" D x 30" H ESPEC #ETH3-9-CWA, temperature & humidity chamber, -20° to 177°
Category: Environmental Chambers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Espec
Model: ETH3-9-CWA
ESPEC Model ETH3-9-CWA Temperature and Humidity Chamber, Condition: ExcellentESPEC Model ETH3.9-CWA :Model: ETH3.9-CWAS/N: 406839Lowest temperature: -20°C to 177°C ( -4°F to 350°F)Highest temperature: 180°C (354°F)Humidity Range: 20% to 95%Approximate Inside Dimensions (W x D x H): 15 x 15 x ...more
Frank Bacon Machinery Sales has 21 more
listings in Environmental Chambers.
Antonik #AB-8 Rockwell Hardness Tester
Category: Hardness Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Antonik
Model: AB-8
Antonik AB-8 Rockwell Hardness Tester (1) USED Antonik Model AB-8 B and C Scale Rockwell Hardness Tester S/N:7233, Antonik AES-8, Vertical Capacity: 8", Throat Depth: 5.25", 1/16" Carbide Ball Penetrator Four (4) Anvils: Plane Flat, Raised Flat, Raised Shallow V, Standard V One (1) "B" and One (1) "C" Scale Test ...more
CV Instruments #CV-600A Cv Instruments Hardness Tester for B & C Rockwell Hardness Scales. S/N 12334
Category: Hardness Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Cv Instruments
Model: CV-600A
CV-600A Rockwell Hardness Tester, USED CV Instruments Model CV-600A Rockwell Hardness Tester for B & C Rockwell Hardness Scales. S/N: 12334 : Vertical Space : 6.7"Throat Depth: 6"Dimensions: 6" x 19 x 28Weight: 85kgTest Loads: 10kgf preload/ 60, 100, 150kgf main loadRockwell Scales: A, B, C, F. Click for Full Spec ...more
Detroit #DH-1, hydraulic Brinell hardness tester
Category: Hardness Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Detroit
Model: DH-1
Detroit DH-1 Hydraulic Brinell Hardness Tester, (1) USED Detroit, Model DH-1, Hydraulic Brinell Hardness Tester. S/N 784, Detroit Model DH-1, Major Brinell Loads (Kgs.): 500 – 3000, Standard Vertical Work Height: 6", Throat Depth: 6", Maximum Test Stroke: 7/16", Approximate Overall Dimensions (W x D x H): 16" x ...more
Detroit #PH-1, multi-load Brinell hardness tester
Category: Hardness Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Detroit
Model: PH-1
Detroit PH-1 Multi-Load Brinell Hardness Tester, (1) USED Detroit, Model PH-1, Hydraulic Brinell Hardness Tester with Multiple Load Settings. S/N 550, Detroit Model PH-1, Major Brinell Loads (Kgs): 500 – 3000, Standard Vertical Work Height: 12", Throat Depth: 6", Maximum Test Stroke: 7/16", Approximate Overall ...more
Detroit #PHL-2, Long Stroke Brinell Hardness Tester, 24" x 17" table, 18" stroke, 18" throat depth, 500-3000 kg test load range, 10 mm ball indenter, 120 Volt, 1PH
Category: Hardness Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Detroit
Model: PHL-2
Detroit PHL-2 Long Stroke Brinell Hardness Tester, Detroit Model PHL-2, Major Brinell Load(Kgs): 500 - 3000 (Customer to Choose Single Load), Throat Depth: 18", Maximum Test Stroke: 18", Table Size (W x D): 24" x 17", Approximate Overall Dimensions (W x D x H): 24" x 48" x 65" (Without Stand), Approximate Weight(lbs): ...more
Frank Bacon Machinery Sales has 17 more
listings in Hardness Testers.
25 HP MTS 510.10, Hydraulic Power Supply, 10.1 GPM, 3000 psi, 230/460 V.
Category: Hydraulic Power Units
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
10.1 GPM MTS 510.10 Hydraulic Power Supply, Reconditioned 10.1 GPM MTS Model 510.10 Hydraulic Power Supply., MTS Model 510.10, Model: 510.10, Flow (GPM): 10.1 (45.9 LPM), Max Pressure (PSI): 3,000, Motor: 25 HP, Voltage Requirements (V, HZ, PH, A): 460/230, 60, 3, 34/68, Cooling: New Water Cooled Heat Exchanger, FOB ...more
25 HP MTS 505.11, hydraulic power unit, 11 GPM, 3000 psi, reconditioned, 2006
Category: Hydraulic Power Units
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Year: 2006
11GPM MTS 505.11 Hydraulic Power Unit Reconditioned MTS Model 505.11, 11 GPM SilentFlo Hydraulic Power Unit, 11 GPM MTS Model 505.11 HPU SilentFlo, Model: 505.11, Serial Number: 10226500, Assembly Number: HD-505-001, Flow (GPM): 11.0 (41.6 l/min), MFG Date: 2006, Pressure (PSI): 3,000, Motor: 25 HP, Hours: 0 (Fully ...more
25 HP MTS 505.11, 11 GPM SilentFlo Hydraulic Power Unit, reconditioned
Category: Hydraulic Power Units
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
11GPM MTS 505.11 Hydraulic Power Unit Reconditioned MTS Model 505.11, 11 GPM SilentFlo Hydraulic Power Unit, 11 GPM MTS Model 505.11 HPU SilentFlo, Model: 505.11 Serial Number: 10200169 Assembly Number: 100-150-897 Rev A Flow (GPM): 11.0 (41.6 l/min) MFG Date: 11/2005 Pressure (PSI): 3,000 Motor: 25 HP Hours: 0 (Fully ...more
40 HP MTS #505.20, Hydraulic Power Supply, 3000 psi, 20 GPM, 440/460 V., 2006
Category: Hydraulic Power Units
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Year: 2006
20GPM MTS 505.20 Hydraulic Power Supply MTS Model 505.20, Model: 505.20, Serial Number: 10221576, Assembly Number: 100-009-559 Rev A, Flow (GPM): 20.0 (75.5 l/min), MFG Date: 09/2006, Pressure (PSI): 3,000, Motor: 40 HP, Voltage Requirements (V, Hz, Ph, A): 440-460, 60, 3, 53.1, Cooling: Water Cooled Heat Exchanger ...more
40 HP MTS #501.02, hydraulic power supply, 20 gpm, 3000 psi, 460 V., water cooled heat exchanger, reconditioned
Category: Hydraulic Power Units
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
20GPM MTS Model 501.02, 3,000 PSI Hydraulic Power Supply, MTS Model 501.02:Model: 501.02Serial Number: 88Flow (GPM): 20Pressure (PSI): 3,000Hours: 7,786Motor: 40 HP/1765 RPMVoltage Requirements (V, Hz, Ph, A): 460, 60, 3, 50A : Water Cooled Heat Exchanger FOB Warren, MIReconditioned with 90 Day Warranty*Actual Images ...more
Frank Bacon Machinery Sales has 15 more
listings in Hydraulic Power Units.
Magnaflux #DRA-2393, portable magnetic particle, 1500 amp AC, 1000 amp HWDC, 50/60 hz
Category: Inspection Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Magnaflux
Model: DRA-2393
Magnaflux DRA-2393 1,500 AMP AC Portable Magnetic Particle Inspection Unit, (1) Used 1,500 Amp AC Magnaflux Model DRA-2393 Magnetic Particle Tester Portable Tester. S/N 601248, Magnaflux Model DRA-2393, Magnetizing Max Output Current(Amps): 1,500 AC, Magnetizing Continuous Output Current(Amps): 1000 AC, Voltage ...more
Olympus #GX41F, inverted metallurgical microscope, instruction manual, X-Y mechanical stage
Category: Inspection Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Olympus
Model: GX41F
Olympus Model GX41F Inverted Metallurgical Microscope USED Olympus Model GX41F Inverted Metallurgical Microscope., Olympus Model GX41, Instruction Manual, X-Y Mechanical Stage, Binocular Eyepieces: (2) WHB 10x/20, Objectives: Mplan 5, 10, 20 & 50x, Halogen Light Source, New AM Scope Digital Camera and Software for ...more
Zeiss #ICM-405, Metallurgical microscope
Category: Inspection Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Zeiss
Model: ICM-405
Zeiss ICM 405 Inverted Metallurgical Microscope, (1) USED Zeiss Model ICM 405 Inverted Metallurgical Microscope for Both Incident and Transmitted Light Operations., Zeiss Model ICM 405, 1x Revolving Nose piece X-Y Mechanical Stage Binocular Eyepieces: (2) Kpl-W 10x Epi-Plan Objectives: HD2.5x, HD8x, HD16x, HD40x ...more
Microscope & Imaging Equipment
1 Result
Nikon #SMZ800, zoom stereo microscope, 1x-6x zoom range, 6.3:1 zoom ratio, boom stand
Category: Microscope & Imaging Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Nikon
Model: SMZ800
Nikon SMZ800 Zoom Stereo Microscope, Nikon Model SMZ800: Zoom Range: 1x-6xZoom Ratio: 6.3:1Dimensions: 30" x 9" x 20" : Boom Stand LED light Ring Infinity 1 Camera (No Software) C-W10xS/22 Eye Pieces 1x Plan Objective FOB Warren, MICleaned, Serviced & Guaranteed30 Day Satisfaction Guaranteed Return Privilege, | ...more
Miscellaneous Testing Equipment
75 Results
ASTM #C633, Test Fixture for Thermal Spray Coatings, Adhesion Testing
Category: Miscellaneous Testing Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Astm
Model: C633
ASTM C633 Test Fixture for Thermal Spray Coatings Fixture for Adhesion Testing of Thermal Spray Coatings ASTM C633, Made Per ASTM C633 Requirements, Self-Aligning Design, Upper and Lower 50kN (11,250 lbf) Grip Holder, Upper and Lower Tensile Grip M16 Threaded Inserts, Upper and Lower 25mm Diameter Stainless Steel ...more
ASTM #D7078, V-notched rail shear test fixture, set of upper & lower, to 50kN
Category: Miscellaneous Testing Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Astm
Model: D7078
V Notched Rail Shear Test Fixture ASTM D7078, V Notched Rail Shear Test Fixture ASTM D7078, Includes:, Per ASTM D7078 Set of upper and lower Rated to 50kN 31.8mm female cup adapter with a hole for a 12.7mm dia. Cross pin (machine adapters available) Weight: 4 kg ea., | #THS7078-50, DOWNLOAD SPEC SHEET.
ASTM #F1306 Test Fixture, F1306
Category: Miscellaneous Testing Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Astm
Model: F1306
ASTM F1306 Test Fixture, Puncture Resistance Fixture with Pneumatic Clamping for ASTM F1306 TestingClick to View ASTM F1306 Video* Pneumatic Puncture Fixture* Confirm to ASTM-F1306-18* Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates* Clamping force 5kN / 8 bar (9kN / ...more
Bolt Extensometer Model 3565, Adjustable from 1 to 6 inch (25 mm to 150 mm) gauge lengths
Category: Miscellaneous Testing Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Bolt Extensometer
Model: 3565
Bolt Extensometer, New Model 3565 Bolt Extensometer, Adjustable from 1 to 6 inch (25 mm to 150 mm) gauge lengths Standard temperature range (-40°C to 100°C) Connector to be determined, | Bolt Extensometer, DOWNLOAD SPEC SHEET.
Eccentric Roller Grips, Rated 10 kN (2200 lb), 8 mm (0.32" ) max sample thickness
Category: Miscellaneous Testing Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Eccentric
10kN Eccentric Roller Grips (1) Set of (2) Eccentric Roller Grips, Rated 10 kN (2200 lb), Max Sample Thickness: 8 mm (0.32"), Knurled surface roller 50 mm (1") diameter, Smooth surface back plate, 15.9mm female cup adapter with a hole for a 8mm dia. cross pin Max sample width 60 mm (2.4"), Set of (2) Machine Adapters ...more
Frank Bacon Machinery Sales has 70 more
listings in Miscellaneous Testing Equipment.
TMI #22-05 Izod/Charpy motorized notching cutter, 0 to 5 ipm, 160 to 450 fpm, 1 to 4.5" W clamping vise
Category: Notching Machines
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Tmi
Model: 22-05
TMI 22-05 Izod/Charpy Motorized Notching Cutter TMI 22-05 Izod/Charpy Motorized Notching Cutter : Approximate Overall Dimensions: 21” x 21” x 21” Approximate Weight (lbs): 55 Electrical Requirements (V, Hz, Ph): 115, 60, 1 : Variable Sample Feed: 0 to 5 ipm Variable Cutter Speed: 160 to 450 ft./min. ...more
14" Microvu #M1040270 Spectra, Optical Comparator, 18" x 5" T-Slotted Work Stage
Category: Optical Comparators
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Microvu
Model: M1040270
Microvu Model M1040270 Spectra 14" Optical Comparator, Microvu Spectra 14" Optical Comparator Model M1040270 MFG 8/9/07 :Screen Diameter: 14"T-Slotted Work Stage: 18" x 5"Electrical Requirements: 120V, 60Hz, 1PHFloor Space (W x D x H): 32" x 46" x 75"Approximate Weight: 400lbs. : InSpec Metrology Software for Full PC ...more
Hydraulic Power Supply And Units Hpu Hps From 1gpm To 140gpm
Category: Optical Comparators
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Hydraulic Power Supply and Units HPU HPS from 1GPM to 140GPM Hydraulic Power Supply and Unit Rental - HPU HPS from 1GPM to 140GPM, Instron, MTS, many model ranges for rent!, Request a quote or call today for rental machines in stock ready to ship!, FOB Warren, MI, | HydraulicRental, DOWNLOAD SPEC SHEET.
Hydraulic Service Manifold Rental
Category: Optical Comparators
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Hydraulic Service Manifold Rental Hydraulic Service Manifolds 40 GPM - 250GPM, MTS, many model ranges for rent!, MTS Model 293.22, 290.21, 290.13, 293.11, Request a quote or call today for rental machines in stock ready to ship!, FOB Warren, MI, | HydraulicServiceRental, DOWNLOAD SPEC SHEET.
Polishers (Including Buffing Jacks)
2 Results
front back #CMGP1200/1250, single wheel grinding & polishing machine, manual grinding, table top model, new
Category: Polishers (Including Buffing Jacks)
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Fb
Model: CMGP1200/1250
front back #CMGP2200/2250, dual wheel grinding & polishing machine, manual grinding, table top model, new
Category: Polishers (Including Buffing Jacks)
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Fb
Model: CMGP2200/2250
Lansmont #95/115, Shock Test System, 1000 lbs Max Specimen Weight
Category: Shock Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Lansmont
Model: 95/115
Lansmont Model 95/115 Shock Test System, Lansmont Model 95/115: Max Specimen Weight: 1000 lbsMax Package Size:Length: 45"Width: 37"Height: No RestrictionsMax Acceleration: 600g (Bare Table)Min Pulse Duration: 2 msec (Half Sine)Max Velocity Changes: 24 ft/sec Approximate Overall Dimension: Height 121 in. (307.5 ...more
MTS #IMPAC Shock Test System, 36" W x 42" D Table, 600 lbs max weight, 110VAC, 60Hz, 1Ph
Category: Shock Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: IMPAC SHOCK TEST SYSTEM
MTS IMPAC Shock Test System, MTS Model IMPAC :Electrical Requirements: 110VAC, 60Hz, 1Ph (Hydraulic Lift System)Maximum Specimen Weight: 600 lbs.Maximum Specimen Height: No RestrictionsMaximum Acceleration: 600gOver all Dimensions (W x D x H): 64" x 42" x 107"Seismic Base Weight: 6,500 lbsOverall Weight: 11,000 lbs : ...more
225 lbf (1kN) MTS #QTest/2L eP2 testing machine
Category: Tensile Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: QTEST/2L
225 lbf (1kN) MTS QTest/2L eP2 Testing Machine (1) Reconditioned 225 lbf (1 kN) Capacity MTS, Model QTest/2L, Electro-Mechanical Ball Screw Tension and Compression Testing Machine with MTS 250 lbf Capacity Load Cell. S/N QT2-695-032E, MTS Model QTest/2L, Tension Testing Opening (Less Tooling): 40", Compression Testing ...more
300 lbf, Instron / Satec #SI-1K3 Impact Tester
Category: Tensile Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: SI-1K3
300 ft-lb Instron/Satec SI-1K3 Impact Tester Instron/Satec Model SI-1K3 : Capacity (ft-lbs): 300 Range(s)(ft-lbs): 0 – 300 Approximate Overall Dimensions (W x D x H): 36" x 20" x 61" Space Required (W x D x H): 80" x 24" x 70" Approximate Weight (lbs): 1200 : Universal Pendulum Used Charpy Anvils, Support and ...more
300 lbf. Tinius Olsen Model 84 Charpy Impact Tester, Universal Pendulum, Electronic Brake
Category: Tensile Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Tinius Olsen
Model: 84
Tinius Olsen Model 84 Charpy Impact Tester Tinius Olsen Model 84 Charpy Impact Tester : Capacity (Ft-lbs): 300 Range(s)(Ft-lbs): 0 – 300 Approximate Overall Dimensions (W x D x H): 36" x 20" x 65" Space Required (W x D x H): 84" x 20" x 73" Approximate Weight (lbs): 1,800 : Universal Pendulum Used Charpy Anvils ...more
332 lbf. Frank Bacon Machinery 450 Joules FB-450C Digital Display Charpy Impact Testing Machine, Touch Screen Display, new
Category: Tensile Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Frank Bacon
New FB-450C Charpy Impact Tester, New Frank Bacon Machinery 450 Joules FB-450C Digital Display Charpy Impact Testing Machine. : Max. Impact Energy: 450J (332 Ft/Lbs)Impact Speed: 5.24m/sAngle Resolution:.025Electrical Requirements: 230V, 60Hz, 3PHDimensions: 2220×900×2220mmWeight: 1000kg : Touch Screen ...more
1000 lbf Instron #1011, Tension And Compression Machine
Category: Tensile Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: 1011
1K Instron 1011 Tension and Compression Machine, (1) Reconditioned 1K Instron 1011, Electro-Mechanical Tension and Compression Testing Machine. Updated with New SCR Solid State Variable Speed Drive Controller & 1000 lbf. load cell S/N-C3161, Instron 1011, Tension Testing Opening (Less Tooling): 42", Compression ...more
Frank Bacon Machinery Sales has 113 more
listings in Tensile Testers.
Torque and Torsion Testers
2 Results
10000 lb. Tinius-Olsen #Lo-Torq, 5°-360° /min.both directions, 0-18"btwn chucks
Category: Torque and Torsion Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Tinius-Olsen
Model: LO-TORQ
10,000 in.-lb. Tinius Olsen Lo-Torq Bench Top Torsion Testing System, (1) USED 10,000 In-Lb (1,130 N-m) Capacity Tinius Olsen, Model Lo-Torq, Bench Top Electro-Mechanical Torsion Testing Machine with Torsion Cell and updated with New SCR Variable Speed Drive Controller. S/N 160170, Tinius Olsen Model Lo-Torq, Testing ...more
ServoTest Higher Performance Rotary Torsional Fatigue Actuator, 5000 Nm max torque
Category: Torque and Torsion Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
5000 N-m ServoTest Higher Performance Rotary Torsional Fatigue Actuator Used 5000 Nm ServoTest Input Torque Rotary Actuator with Load Cell and Adjustable Base Assembly, Click to View ServoTest Rotary Actuator Brochure, Max Torque: 5000 Nm, Max Angle: Run Continuously, Overall Dimensions: 75"L x 36"D x 52"H, Adjustable ...more
Universal Fatigue Testers
82 Results
2.2 KIP, ITS #1000-16, vibration system with power amplifier
Category: Universal Fatigue Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Its
Model: 1000-16
2.2 KIP ITS-1000 Vibration System with Power Amplifier, (1) New Frank Bacon, Model ITS-1000 2,200 lbf (9.8 kN) Electrodynamic Vibration Test System with Power Amplifier., Frank Bacon Model ITS-1000 Vibration System, Sine - Force Rating: 9.8 kN (2,200 lbf), Random - Force Rating:9.8 kN (2,200 lbf), Shock Peak -Force ...more
2.2 KIP (10kN), MTS #831.50 Elastomer Fatigue Test System
Category: Universal Fatigue Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 831.50
2.2KIP (10kN) MTS 831.50 Elastomer Fatigue Test System, MTS 858 Mini Bionix:Model Number/Serial Number: 831.50/1317417Frame Capacity (KIP): 2.2 (10 kN)Actuator Capacity (KIP): 2.2 KIP @ 3,000 PSINumber Of Columns: 2Distance Between Columns: 16"Frequency Range: 0.01 to 1000 HzTable Size (W x D): 16" x 18"Overall ...more
2.25 KIP (10 kN), Instron #8511 Tension, Compression & Fatigue Testing
Category: Universal Fatigue Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Instron
Model: 8511
2.25 KIP Instron 8511 Fatigue Material Testing System, (1) USED 2.25 KIP (10 kN) Capacity Instron, Model 8511, Bench Top Dynamic Digital Control Material Testing System (Tension, Compression & Fatigue Testing) Upgraded to New Electronics, Software & Controls, Instron Model 8511, LOAD FRAME :, Model ...more
3.3 KIP #312.21 Fatigue Load Frame
Category: Universal Fatigue Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 312.21
3.3 KIP MTS 312.21 Fatigue Load Frame (1) USED 3.3 KIP (15 kN) Capacity MTS Model 312.21 Material Fatigue Testing System (High Stroke/High Speed). S/N 1314, MTS Model 312.21, Model Number / Serial Number: 312.21/1314, Capacity (KIP): 22, Number Of Columns: 2, Distance Between Columns: 20.75", Test Specimen Max. ...more
3.3 KIP (15kn) MTS #358.02 Hydraulic Actuator
Category: Universal Fatigue Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Model: 358.02
3.3 KIP (15kN) MTS 358.02 Hydraulic Actuator, (1) USED 3.3 KIP (15 kN) Capacity MTS Model 358.02 Hydraulic Actuator. S/N: 0395967 Assembly No. 524793-01, MTS Model 358.02, Force: 3.3 KIP (15 kN), Area: 1.18 in2, Stroke: 4” Dynamic, 4.5” Static, Hydraulic Manifold with (2) Accumulators (1) One Proportional ...more
Frank Bacon Machinery Sales has 77 more
listings in Universal Fatigue Testers.
1.1 KIP (5kN) LDS #V780, Vibration Test System
Category: Vibration Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Lds
1.1KIP (5kN) LDS V780 Vibration Test System, ***Ready for Immediate Shipment*** LDS Model V780 HPA-K : Random Force Rating (lbs.): 950 lbf (4.23 kN) rms Sine Force Rating (lbs.): 1,150 lbf (5.12 kN) Peak Shock Force Rating (lbs.): 2,135 lbf (9.5 kN) 1/2 Sine Shock Peak to Peak Displacement: 1" (25.4 mm) Acceleration ...more
1.3 KIP Frank Bacon ITS-600-ST, Vibration Test System With Slip Table
Category: Vibration Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Frank
1.3 KIP ITS-600-ST Vibration Test System with Slip Table, (1) New Frank Bacon Model ITS-600-ST, 1,320 lbf (5.87 kN) Electrodynamic Vibration Test System with Power Amplifier and Slip Table., ITS-600-ST Vibration System, Sine Force Rating: 5.87 kN (1,320 lbf), Random Force Rating: 4.10 kN (921 lbf), Shock Peak Force ...more
1.3 KIP Frank Bacon ITS-600, electrodynamic vibration test system with power amplifier, new, warranty
Category: Vibration Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Frank
1.3 KIP ITS-600 Vibration Test System with Power Amplifier, (1) New Frank Bacon Model ITS-600, 1,320 lbf (5.87 kN) Electrodynamic Vibration Test System with Power Amplifier., ITS-600 Vibration System, Sine Force Rating: 5.87 kN (1,320 lbf), Random Force Rating: 4.10 kN (921 lbf), Shock Peak Force Rating : 11.76 kN ...more
2.2 KIP Frank Bacon ITS-1000-ST, Vibration System With Slip Table
Category: Vibration Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Frank
2.2 KIP (10 kN) Frank Bacon Vibration System ITS-1000-ST With Slip Table, (1) New Frank Bacon, Model ITS-1000-ST, 2,200 lbf (9.8 kN) Electrodynamic Vibration Test System with Power Amplifier and Slip Table, Frank Bacon Model ITS-1000-ST Vibration System, (Sine) Force Rating: 9.8 kN (2,200 lbf.), (Random) Force Rating: ...more
2.2 KIP LDS #V830-335T, vibration test system, V830-335T air cooled vibrator, LDS V830 cooling blower
Category: Vibration Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Lds
2.2KIP LDS V830-335T Vibration Test System, LDS Model V830-335TCondition: Excellent:Random Force Rating (lbs.): 2205 rmsSine Force Rating (lbs.): 2205 PeakForce Rating (Half Sine Shock): 5644Peak to Peak Displacement: 2"Frequency Range (Hz): 3000 MaxTable Diameter: 13"Max. Armature Weight (lbs.): 26.57Armature ...more
Frank Bacon Machinery Sales has 38 more
listings in Vibration Testers.
