Buy or Sell Your Vertical Lathe

MODEL. SERIES I, AREA OF TABLE. 42" X 9", SPINDLE SPEEDS, VARIABLE. 60 TO 4200 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 12", DEPTH OF THROAT. 6-3/4" TO 18-3/4", TAPER IN SPINDLE. R8, HEAD TILTS, FRONT/BACK. 45 ...more

NUMBER OF ANGLE PLATES. 2, WIDTH OF PLATE. 24", HEIGHT OF PLATE. 24", LENGTH OF BASE. 16", FACE THICKNESS. 2-1/4", T SLOTS VERTICALLY. 3, VERTICAL T SLOT CENTERS. 6", HORIZONTAL T SLOTS. 7, T SLOT CENTERS HORIZONTAL. 6", SLOT WIDTH AT TOP. 7/8", SLOT DEPTH. 1-1/4, T SLOT WIDTH AT BOTTOM. 1-1/2, CAST IRON. YES.

Spec Sheet:, Sanyo Seiko Co Somax Lathe Chuck 13-3/4 4 Jaw, USED, Brand: Sanyo Seiko Co, Somax Lathe Chuck, Jaws: 4, Overall Diameter: 13-3/4, Through Hole: 3.

Tonnage 70 tons Dimensions 7' TALL, 4' RL, 32" FB Weight 1245 pounds, STROKE (HAND OPERATED): 4-1/2" & 7" SCREW TRAVEL, ADJ. OPENING RAM TO TABLE: 6" TO 36" VERTICAL OPENING, USABLE TABLE SIZE: 44" RL X 16-1/4" FB, 8-1/4" OPENING IN TABLE, HORIZONTAL RAM TRAVEL: 29-1/2" RL, -- SUBJECT TO VERIFICATION--.

, MANUFACTURER: KOHLER A.S., TYPE: 19 ROLL BACKED UP LEVELER, No. OF ROLLS: 19, No. OF DRIVEN ROLLS: 19, ROLL CONFIGURATION: 8 OVER 9, ROLL DIAMETER: 0.94" (24mm), ROLL FACE: 7" (178mm), TYPICAL THICKNESS RANGE: 0.0157" - 0.098" (0.4mm - 2.5mm), ROLL BEARING LUBRICATION: FORCED HYDRAULIC SYSTEM, W/INTERNAL TANK AND ...more

SERIAL. #84110643, YEAR NEW. 1984, TABLE AREA (T-SLOTTED). 51" X 10-1/2", LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 15", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 15-1/2", SPINDLE SPEEDS. 60 TO 450 RPM, SPINDLE FEEDS.0015 -.003 -.006 IPR, TAPER IN SPINDLE. R-8, DISTANCE SPINDLE TO TABLE. 22" ...more

Spec Sheet:, 4 Jaw Lathe Chuck 7-3/4 Diameter, USED, Lathe Chuck, Jaws: 4, Overall Diameter: 7-3/4, Through Hole: 1-1/4, No Jaws included.

, BUCK 8-inch 4-jaw lathe chuck available, perfect for enhancing your machining capabilities. This used tooling accessory ensures secure workpiece holds. Ideal for professionals seeking reliable performance in lathe operations., Spec Sheet:, 8" Buck 4 Jaw Lathe Chuck, Plain Back, Fits on a 3.17" Spindle Nose, 2" Hole.

, Used 3" 4-Jaw Lathe Chuck with 5C Collet Mount, perfect for precision tooling needs. s a 3" overall diameter, 6-1/4" OAL, and a robust 4-jaw design. Ideal for professionals seeking reliable tooling accessories., Spec Sheet:, 3"- 4 Jaw Lathe Chuck w/ 5C Collet Mount, USED, 4 Jaws, Type: Lathe Chuck, Overall Diameter: ...more

Used Greerco colloid mill, model W250V, stainless steel construction, vertical orientation, rated up to 25 gpm, jacketed grinding chamber, feed hopper with recirculation system on portable base with 2 hp, 220 volt, xp motor, serial# 3393632, built 1993.

Catalog :, 12” Screen10X LensManualX Travel (Horizontal) 6”Y Travel (Vertical) 2”Focus 1”, Location: Lake Forest.

Siemens HF367N Fusible Safety Disconnect Switch 800 Amp 600 VAC 3 Pole FLSR250ID, Includes 3 FLSR250ID Fuses, Bent latch, several knockouts, Please review all photos and video carefully. The item shown is the exact unit you will receive. This listing reflects a decommissioned industrial asset sold as-is. Confirm ...more

Working AreaTable set up area 83x20 in Table load capacity (max.) 4,400 lbs Number of T-slots 4 positions T-slots, spacing 0.8 in TravelsTravel X-axis 59.1 in Travel Y-axis 26 in Travel Z-axis 0 - 26 in Vertical Milling HeadSpindle speed (vertical) (12) 40 - 1,600 rpm Spindle mount ISO 50 Throat 24 in Vertical ...more

ATECH CRATER-06 A-700 Hydro-Pneumatic Miter Up-Cut SawHeavy duty upcut miter saw designed for straight and miter cuts of PVC (vinyl), aluminum extrusions and wood. 0-15- 22, 5- 30- 45- 60-75 Angle pin locks: -- 28" Blade cap.; (2) horizontal & (2) vertical pneumatic clamps for firm material control through the ...more

Used Approximately 2,200 Gallon Stainless Steel Tank, Capacity: 2,200 gallons, Dimensions: 88" dia. x 84" straight side, Material of construction: 304 stainless steel, Cone top, cone bottom, 18" top manway, Mounted on legs, _UNKNOWN_ 2,200 GALLON, Capacity. 2,200 gal, Diameter. 7.33', Height. 7', Type of ...more

Northtech Model NT-VBSV-204 Boring Machine Machine HP: 12HP Custom Spindle Arrangement Spindle Diameter: M8x1.25 MM Quick Chuck Spindle RPM: 4250 RPM Elevation System: Hydraulic w/ Adjustment Wheel Pedestal Control Panel Max Working Thickness: 5-9/16" Number of Heads: 31 Spindles, 3 Heads Vertical Travel: 3-7/8" on ...more

WHOLESALE EQUIPMENT RESOURCE, LLC. = AMERICA'S STEAM KETTLE HEADQUARTERS !, WORLD FAMOUS: CLEVELAND RANGE #MKEL-40-T, 40 GAL. VERTICAL AGITATION & SCRAPE SURFACE, MANUAL TILTING COOKER/MIXER w/ OPTIONAL DELUXE WATER METER !, STOCK #1073C., THIS KETTLE WAS VERY LIGHTLY USED IN A START-UP ENTITY THAT VERY ...more

FANUC R-2000iC/270F with R30iB PLUS Controls available as a used robotic solution. Known for precision and reliability, this model offers robust performance for industrial applications. Ideal for enhancing automation efficiency., Spec Sheet, 2021 FANUC R-2000iC/270F + R30iB PLUS, # Axis. 6, Payload. 562 lb, Vertical ...more

SERIAL. 3J6F1L-34 MODEL. 6 HORIZONTAL WORKING SURFACE OF TABLE. 104-1/2" X 20" SPINDLE SPEEDS. (24) 14 TO 1400 RPM LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM VERTICAL FEEDS. (32) 3/32 TO 22-1/2 IPM LONGITUDINAL TRAVEL. 60" CROSS TRAVEL. 18" VERTICAL TRAVEL. 20" DISTANCE SPINDLE TO TABLE. 3/4" MINIMUM, 20-3/4" ...more

SERIAL. 10235, MODEL.18, SWING OVER WAYS. 18", SWING OVER CROSS SLIDE. 8-1/4", SWING IN GAP. 26", DISTANCE BETWEEN CENTERS. 42", SPINDLE SPEEDS. 25 TO 1500 RPM, FEEDS ENGLISH.00042 TO.0593 IPR, THREAD ENGLISH. 4 TO 54 TPI, THREADS METRIC.05 TO 7 MM, SPINDLE HOLE. 2", CHUCK. 12" 3 JAW, COOLANT WITH CHIP PANS. YES ...more

HOLZ-HER - DYNESTIC 7505 10.5 PUSH: Flat Table Machine (w/Rake/Offloading) -- 5' x 10-1/2' Phenolic MATRIX Table for: "Nested Base" Manufacturing. -- Working Area:"X" Axis 122" (3,100 mm); "Y" axis 62.2" (1,580 mm); "Z" axis stroke 12.4" (317 mm). -- Positioning Speed"X" & "Y" Axis 230 FPM (70 MPM); "Z" ...more

Brand/Model: Louis Allis - : Used Louis Allis 150 HP electric motor with following s: • 3570 RPM • 460 Volts • 184 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • 445 UP Frame • CEXC Type • Weight • Dims HP: 150 RPM: 3570 Volts: 460 Phase: 3.

MODEL #: 10MW2, SERIAL #: 11591-A-867, 10 STAND, 2" SHAFT DIAMETER, 15" ROLL SPACE, 12" HORIZONTAL CENTERS, 5-1/2" - 7" VERTICAL CENTERS, COOLANT PUMP, MOTOR AND CONTROLS UPDATED.

SERIAL. 2526, MODEL. A24UP/1500, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 12-1/2", DISTANCE BETWEEN CENTERS. 62", SPINDLE SPEEDS. 45 TO 500 RPM, FEEDS.0009 TO.0320 IPR, THREADS (INCH). 1 TO 56 TPI, THREADS (METRIC).05 TO 36 MM PITCH, DIAMETER OF SPINDLE HOLE. 2-1/2", CHUCK. 12" 6-JAW, SPINDLE FORWARD AND REVERSE. ...more

SERIAL. 57-1003-02, MODEL. 430TF-20, WORK TABLE AREA (T-SLOTTED). 19-1/2" X 88", LONGITUDINAL TABLE TRAVEL. 42", CROSS TABLE TRAVEL. 14", VERTICAL TABLE TRAVEL. 21", LONGITUDINAL & CROSS TABLE FEEDS. (32) 3/8 - 90 IPM, VERTICAL TABLE FEEDS. (32) 1/8 - 30 IPM, SPINDLE SPEEDS. (24) 15 - 1500 RPM, SPINDLE TAPER. #50 ...more

SERIAL. 12429-567, MODEL. 4-HMW-1-1/2, STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2'.

Used Approximately 10,000 Gallon 304 Stainless Steel Jacketed Mix Tank, Capacity: 10,000 gallon, Manufacturer: Walker Stainless, Serial: SPG-50858, Year: 2005, Jacket pressure: 150 psi @ 300F, Dimension: 121" O.D., Flat top, dish bottom, Side, bottom-entering propeller mixer, Side bottom manway, Mounted on skirt ...more

Used Approximately 75 Gallon Stainless Steel Tank, Capacity: 75 gallons, Dimensions: 22" dia. x 4'2" straight side, Dish top, dish bottom, Mounted on legs, _UNKNOWN_ 75 GALLON, Capacity. 75 gal, Diameter. 1.83', Height. 4.16', Type of stainless. Stainless Steel, Type Of Heads. Dished, Vertical/Horizontal. ...more

UTUBE NUMBER: 4018, MANUFACTURER: CUSTOM, Number of Stands: 3, Spindle Diameter: 1-1/2″, Roll Space: 6″, Horizontal Centers: 7-3/4″, Base to Center of Lower Shaft: 4-1/8″, Vertical Centers: 3″ – 4″, Gear Driven with Chain, LOCATION: Universal Warehouse, Perrysburg, Ohio ...more

Used Approximately 376 Gallon Stainless Steel Tank, Manufacturer: Winbco, Capacity: 376 gallons, Year: 2015, Dimensions: 48" dia. x 4' straight side, Material of construction: 304L stainless steel, Cone top, flat bottom, Additional dimensions: 3/16" wall thickness, mounted on legs, 2015 WINBCO 376 GALLON ...more

Pre Owned Kent Model KGS-250AHD Surface Grinder, New 1998, Overall Table Working Area 8” X 18”, Longitudinal Table Travel 21.25”, Cross-feed Table Travel 10.5”, Distance Spindel Center to Table 18.6”, Grinding Wheel Dims 8” X 3/4” X 1 14”, Spindle Speed 3480, Vertical ...more

SERIAL. 13619-669, MODEL. 24-HMW-1-1/2, STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2".

Stock #: 190250032, Location: Decatur, GA, Brand: Seiki, Model: XL, Serial #: 75721, Approx. Shipping Weight: 5,000 Lbs., Approx. Shipping Dimensions: 130" L x 60" W x 58" H, Skidding Fee: Skidding Unavailable, Swing Over Ways: 17?, Distance Between Centers: 72?, Spindle Speeds: 50 - 1800 R.P.M., Inch ...more

24" 4-JAW CUSHMAN FRONT CHUCK WITH 12-1/2" HOLE THROUGHwith 20" A-1 spindle.

Used Approximately 500 Gallon Stainless Steel Vertical Tank, Capacity: 500 gallons, Dimensions: 43 dia. x 86 straight side, Slight dish top, slight dish bottom with skirt, Manway on top, _UNKNOWN_ 500 GALLON, Capacity. 500 gal, Diameter. 3.58', Height. 7.17', Type of stainless. Stainless Steel, Type Of Heads. ...more

Used 4" Metalchek 9 Gravity Fall Metal Detector w/reject, 4" non-metallic vertical sleeve, Fixed to a mild steel stand, Overall height: 53", Automated stainless steel divert valve (air actuated), Complete with controls, Demonstration video on file.

Product Marvel SERIES 8 MK II VERTICAL BAND SAWSerial# 829695, New-, CAPACITY: NOMINAL ………………. 18″ x 22″ HORIZONTAL ……………. 18″ VERTICAL ………………. 22″ BLADE @ 45 deg ………… ...more

Used Milltronics Partner IV. This pre-owned Vertical Machining Center is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Milltronics Vertical Machining Center we can review machine. To request a quote, inquire about rigging and trucking or ...more

SERIAL. 13, MODEL. REGAL, SWING OVER WAYS. 15-1/2", SING OVER CROSS SLIDE. 9-1/2", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. (12) 45 TO 1800 RPM, DIAMETER OF SPINDLE HOLE. 2-9/32", FEEDS. (48).0018 TO.104 TPI, THREADS. (48) 2 TO 112 TPI, METRIC THREADING.375 TO 99 TPMM, TAPER ATTCHMENT. YES, STEADY REST. YES ...more

Make: Tormach, Model: 770M, Year: 2022, Machine Location: Missouri, X-Axis Travel: 14″, Y-Axis Travel: 7.5″, Z-Axis Travel: 13.25″, Spindle Power: 1.5 HP, Max. Spindle Speed: 10,000 RPM, Spindle Taper: R8, X/Y Axis Feed Rate: 135 IPM, Z Axis Feed Rate: 110 IPM, Table Size: 26″ x 8″, Max. ...more

USED HOWA H034M8 8" 2 JAW CHUCK, Offered with a 14 day warranty., Subject to local sale. Please verify part is still available before proceeding with payment., Thank you!, HOWA H034M8 8" 2 JAW CHUCK USED.

Chuck Dia.: 20 inches Spindle (Horz/Vert): vertical Power: 15 horsepower Swing: No Attached inches Under Wheel: No Attached inches Table Speeds: No Attached Grinding Wheel Width: No Attached inches Table Motor Horsepower: No Attached horsepower Grinding Wheel Dia.: No Attached inches CNC Control: yes Type of CNC ...more

Used De Dietrich approximately 125 gallon glass lined tank. Rated 100 psi/full vacuum internal @ 500F. No jacket. Stainless steel top with half lid cover. Center bottom outlet. On wheels. National Board 861., 1998 DE DIETRICH 125 GALLON, Capacity. 125 gal, Internal Pressure. 100 psi, Internal Temperature. 500F ...more

DIAMATER.: 36", # OF JAWS.: 4, # OF T-SLOTS.: 4, MOUNTING TYPE.: THREADED, # OF MOUNTING BOLTS.: 8, THRU HOLE SIZE.:, Machine Type.Chucks Manufacturer.N/A Model.N/A Year.N/A Condition.Used.

Used Approximately 80 Gallon Stainless Steel Tank, Manufacturer: Groen, Capacity: 80 gallons, Dimensions: 30" dia. x 28" straight side, Open top, dish bottom, Mounted on legs, GROEN 80 Gallon, Capacity. 80 gal, Diameter. 2.5', Height. 2.33', Type of stainless. 304, Type Of Heads. Hemispherical ...more