Buy or Sell Your Upcut Saws

Cincinnati Cut-to-Length Line Shear and Stacker, Capacity: 72" Wide x 0.135" Mild Steel, -Mechanical Upcut Shear:, Model: HHS 551, 72" x 0.135" Capacity, Entry Pass Line Rolls, Entry Side Guides, AC Motor, Air Clutch and Brake, -Measuring Table:, 72" Wide, 14' Long, Skate Wheel Conveyor, Mechanical Flag Type Stop ...more

Nelson Atkinson NA-800 used Right hand Upcut saw.For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more

Industrial Brand 12" Up Cut Saws, 8 Available.

Used CDS Upcut Saw, Model CSTMS 4.5-8 Servo Travelling Miter Saw 26" Table Travel (2) 12" Carbide Tipped Saw Blades with (2) 2 Hp AC Motors +-.020" Length Accuracy 2 Blades Capable of Cutting Opposing 45 Degree Angles (One Blade At 45 Degrees and One Blade At 135) At Fixed Angles 10-18 FPM Line Speed 460 Volt S/N: ...more

SERIAL. 18659.000, NEW. 2004, MODEL. PRECUT FRONT END SELECT, CAPACITY. 48" WIDE, SHEAR BLADES. BOW TIE STYLE.

Brewco 8x10 Speed Cut Pop Up Saw, 10” infeed and 20” outfeed rolls, New 24” blade.

COULD BE FOR CUT TO LENGTH LINE OR SCRAP, CAPACITY. 3/8", BLADE LENGTH. 56" EST OR 48" CUT, SPRING HOLD DOWN BAR. YES, POWERED BY (2) 8" HYDRAULIC CYLINDERS.

used cds air traveling up-cut profile saw, model cts 4.5-8. unit rated for 8" wide 3.5" high profiles, 4.5" high x 4" wide profiles, and 4.5" od pipe. 14" diameter saw blade. tag on unit reads saw motor keeps tripping electrical breaker".

Stock #: 170240044, Location: Stone Mountain, GA, Brand: Whirlwind, Model: 212L, Approx. Shipping Weight: 750 Lbs., Approx. Shipping Dimensions: 4' L x 4' W x 5' H, Skidding Fee: $100, Blade Capacity: 18", Cutting Capacity: 4" x 10", 2" x 12" to 1" x 13", Motor HP: 10 ...more

Razorgage Model Cyclone 600 Upcut Saw with 6" Fence Cuts materials up to 1" x 20" or 6" x 6" Includes RazorGage's Patented Safe-T-Crowder, Allowing the Operator to Crowd Stock Against The Fence with Two Anti-Tie Down Handles Clamp and Motor Both Ride on Linear Guides & Bearings Main Motor: 7.5 HP ...more

ATECH CRATER-02A 16.5" Miter Upcut SawHeavy duty construction for long machine life; moveable back fence enables you to cut bigger profiles on both straight and miter cuts. -- : -- 5.5 HP Saw motor; 16.5" dia. blade; (2) horizontal and (2) vertical pneumatic clamps to provide firm material hold-down through cutting ...more

ATECH CRATER-06 A-700 Hydro-Pneumatic Miter Up-Cut SawHeavy duty upcut miter saw designed for straight and miter cuts of PVC (vinyl), aluminum extrusions and wood. 0-15- 22, 5- 30- 45- 60-75 Angle pin locks: -- 28" Blade cap.; (2) horizontal & (2) vertical pneumatic clamps for firm material control through the ...more

DOUCET - X 60: Finger Jointer Line for Medium Production"X 60 DG" Automatic feed Finger Jointer has Chain Feeding System: Driven on the bottom & right-and-left side; feeds board up to 6" max. width. Capacity -- 3/4" - 2" Max. thickness; 1-1/2" - 8" max. width with: Lugs on 11" centers; 5" min. - 48" max. material ...more

PRESSTA EISELE TS 350 Precision Semi-Automatic Upcut Miter Saw for PVC/Aluminum ProfilesGerman engineered precision semi-automatic cut-off miter saw designed to saw aluminum & uPVC profiles quickly, accurately and with a burr free mirror finish. Use of Ø350 mm saw blades with manual handling, Material ...more

Aslan 28″ Semi-Automatic Non-Ferrous Aluminum Upcut Saw, US1-700, Inventory # 8223, Model: US1-700, Cutting Angles: All angles from 0° to 75°, Saw Blade Diameter: 28″, Saw Blade Bore Diameter: 1.496″, Saw Blade Rotation: 3,000 RPM, Motor: 5.5 HP / 220v, 440v / 3ph, Standard s:, For cutting ...more

ATECH Crater-06 A (Pneumatic Miter Up-Cut) Cutoff Saw; Heavy-duty construction for long machine life. The moveable back fence enables you to cut bigger profiles on both straight and miter cuts.: -- 18" Blade cap.; pneumatic clamps provide firm holddown through cutting cycle. -- Solid, heavily constructed Cast Iron ...more

Scotchman 24″ Up-Cut Non-Ferrous Saw, SUP-600, Inventory # 9874, Model: SUP-600, S/N: 468SUP0223, Capacity:, @ 90°:, Round: 9″, Square: 8″, Rectangle: 15″ x 6″, @ 45°:, Round: 9″, Square: 7″, Rectangle: 10″ x 4″, Cutting Speed: 3,000 RPM, Max. Diameter ...more

The Pat Mooney PMI-20 is a semi-automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics)., Mitre Capability: The PMI-20 is a turn table that allows set up of miter cut in seconds. A positive lock of the table is released and ...more

Aslan 18″ Semi-Automatic Non-Ferrous Aluminum Upcut Saw, CMS-504, Inventory # 8220, Model: CMS-504, Max. Profile Height: 6″, Max. Profile Width: 12″, Cutting Angles: All angles from -45° left to +45° right, Saw Blade Diameter: 18″, Saw Blade Bore Diameter: 1.18″ / 1 1/4″ ...more

PMI T5S Semi-Automatic Compound Upcut Miter SawPrecision semi-automatic compound upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics) with a burr free mirror finish. The saw blade is mounted on a turntable to set up miter cut in ...more

Currently in Production Line Includes: Turnstile, 3 Arm, 58" Arms Coil Car 44" Wide Self Contained Hydraulics Uncoiler 64" Wide 18" to 25" Hydraulic Expanding Pads 28" Slide Base, Air Clutch & Brake AC Motor Feeding Peeler/Hold Down/Shear Unit, 72" Blade, Hydraulic Upcut Slitter, 2 Heads 62" Wide 10" Arbor Dog ...more

The Pat Mooney PMI-20 24 is a semi-automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics)., Mitre Capability: The PMI-20 24 is a turn table that allows set up of miter cut in seconds. A positive lock of the table is released ...more

The Pat Mooney PMI-18 is a semi-automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics)., 7.5 HP Saw Motor:, The strong drive system via 7.5 HP saw motor allows for maximum cutting force and chip removal. This additional power ...more

Make: Loyalmak, Model: ProCut, Year: 2018, Machine Location: Upon Request, -Hypertherm XPR300 Power Source, -10′ x 20′ Flame Cutting Table, -V W I Gas Console, -1x Tanaka Oxy Torch, -Extraction System, -Loyal Jet Pulse, -Jet Filler 8000 M3, -Donaldson Cartridges, -Manual Bevel Device (for Plasma and Oxy ...more

BACCI MASTER.CUT CNC Bandsaw with NC Router and ATC. The operating fields of the two units, (saw & router) are fully independent, allowing machining and cutting of the complete panel or multiple stacked panels. -- Manufacture’s : Cut size: 1,250 mm (49.2") cutting length capacity; 1,550 mm, ((61") loading ...more

CROSSCUT SOLUTIONS CS18P Pneumatic Upcut Saw: -- 2" x 12" Cross cut cap.; pneumatically operated cut-off saw; 7-1/2 HP TEFC motor with magnetic starter with 110 volt control voltage; adjustable cycle speed of up to 90 Cy/Min; accepts 18" saw blade (not included - add.$350 for 18" saw blade). -- NOTE: State right or ...more

CROSSCUT SOLUTIONS CS18M Mechanically-operated Cut-off Saw: -- 2" x 12" Crosscut cap.; 7-1/2 HP TEFC motor with magnetic starter with 110 volt control voltage; standard cycle speed of 133 cycles/Min; accepts 18" saw blade (not included). -- No compressed air is required which reduces your operating and installation ...more

CAPACITY:, Maximum Swing: 19.68", Maximum Cutting Diameter: 8.26", Maximum Cutting Length (w/ Turret): 18.11", Slant Bed Degree: 30 Deg., Z-Axis Travel: 20.47", X-Axis Travel: 8.46", Spindle Thru Hole: 1.65", Spindle Nose: ASA A2-5, Spindle Speeds: 6000 RPM, Rapid Feeds X/Z: 1181.1 IPM, Tailstock Quill Diameter: ...more

SERIAL. 25598MODEL. H-460HAYEAR NEW. 2006 CAPACITY RECTANGLES. 20" X 18"CAPACITY ROUNDS. 18"BLADE SPEEDS. 65 TP 330 FPMPOWER ELEVATION. YESINDEXING LENGTH. 19.685"INDEXING CYCLE. 9 MAXIMUMBLADE DIMENSION. 215"X 1.6" X.050"BLADE TENSION. HYDRAULICBLADE FORCE VARAIABLE. HYDRAULICOPERATOR CONTROL CONSOL. YESCOOLANT. ...more

Make: FastCut CNC, Hypotherm, Model: Fast Cut Icon Elite Plasma Table with Water Bed and Hypotherm Power Max85, Year: 2020, Machine Location: Minnesota, Size: 5×10, Weight: 650 lbs, Motors: 500 oz-in stepper, Gearhead: 5:1 Planetary Gearbox, Guides: Dual drive linear guide system, Drive System: Precision linear ...more

Spindle Diameter. 5.12": 5.12", Spindle Taper. ISO #50: ISO #50, Vertical Head Travel, Y-Axis: 102.36", Cross Travel, X-Axis: 137.79", Column Longitudinal Travel, Z-Axis: 55.11", Spindle Travel, W-Axis: 27.55, Distance Between Spindle Nose & Table. 3.93"-78.74":, Spindle Speeds, 2-Speed: 35-3000 RPM, Built-In ...more

Swing Over Bed: 51.18", Swing Over Cross Slide: 38.58", Overall Bed Width: 51.18", Maximum Turning Length: 472.44", Max. Work Piece Weight w/ Tailstock: 22,000 Lbs, Spindle Speeds: 1-735 RPM, Spindle Hole Diameter: 6.02", Spindle Nose Mount: A2-11, X-Axis Travel: 25.59", Z-Axis Travel: 472.44", Main Motor: 80 HP/100 ...more

CAPACITY:, Swing Over Bed: 40.15", Swing Over Cross Slide: 26.77", Swing in Gap: 50.39", Width of Bed: 22.5", Maximum Turning Length: 236.22", Max. Work Piece Weight w/ Tailstock: 6,600 Lbs, Max. Work Piece Weight - 1-Steady: 8,800 Lbs, Max. Work Piece Weight - 2-Steadies: 11,000 Lbs, Spindle Speeds, 2-Ranges: 15-1480 ...more

CAPACITY:, X-Axis Travel: 62.99", Y-Axis Travel: 31.49", Z-Axis Travel: 27.95", Table Size: 70.86" x 31.49", Table Weight Capacity: 4,400 lbs, Spindle Speeds: 10,000 RPM, Spindle Taper: #50 ISO, Spindle Nose to Table: 5.9"/33.85", Spindle Drive Motor: 20 HP / 26 HP, Electrics: 220/3/60, Machine Dimensions (w/ Chip ...more

80” X 150” Plasma Cutting System with Hypertherm Edge Connect Controller, Hypertherm HPR300 Plasma System and 5-Axis Full Contour Bevel Head., Table Size: 80” X 150”, Table Capacity: 4”, Clearance Under Gantry: 8.5”, Cutting Speed: 500 IPM, Max Speed Traverse: 1,800 IPM, INCLUDES: ...more

12" METALCUT MODEL 12RH HIGH SPEED AUTOMATIC CARBIDE BILLET COLD SAW, MODEL. 12" RH, NEW. 1973, CAPACITY - ROUNDS. 12", BLADE DIAMETER. 24" TO 40", BLADE SPEEDS. VARIABLE, 200 TO 600 RPM, SAW HEAD INFEED. HYDRAULIC, HEAD SLIDE GIBBING. 6 GIBS, FEED LENGTH PER STROKE. UP TO 36", DUAL CLAMPING. YES, HYDRAULIC, RUN ...more

30"18"20"35.4" X 16"CAT4010,000 rpm10 / 14.75 HP945"/MIN.472"/MIN.245.12".

SKU: 120260, Model: LT-65, Year: 2019, Condition: Used, S/N: 1915011153, Swing Over Ways: 20 ", Swing Over Carriage: 16 ", Electrical :, Voltage: 220 volts, Phase: 3-phase, Additional :, Swing over bed: 508mm (20"), Swing over cross slide: 407mm (16"), Maximum turning diameter with turret: 407mm ...more

2000 DEPO DEPOCUT 2012, X Axis Travel. 78.7", Y Axis Travel. 47.2", Z Axis Travel. 31.5", Spindle Motor. 28.5 hp, Spindle Speed. 18,000 RPM, Spindle Taper. HSK80, Table-W. 63", Table-L. 90.5", Heidenhain TNC 426 CNC Control.

SKU: 120253, Model: MCV-4425 RH-20, Year: 2013, Condition: Used, S/N: 1323321727, Spindle Taper: ISO 40, Table Size: 1300 x 600 mm, Speed: 8000 rpm, CNC: Yes, Electrical :, Voltage: 400 volts, Phase: 3-phase, Amps: 50 amps, Dimensions: 80.00 (H) x 65.00 (W) x 96.00 (L) inches, Additional :, s, - Fagor 8055i/A MC LCD ...more

Capacity 2" x 12" Motor 230/460 Volts, 3 Ph, 7.5 HP, 60 HZ, * Available in right or left hand, * Pneumatically operated cut-off saw, * Magnetic starter with 110 volt control voltage, * Adjustable cutting cycle speed of up to 90 cycles/minute, OPTIONAL S:, * 4X Option - $250.00, * TigerStop 8' OAL mounted on Non ...more

Make: Schmidt & Heinzmann, Model: AutoCut SMC, Year: 2020, Machine Location: Upon Request, Equipment Overview, This Schmidt & Heinzmann AutoCut system is a full-scale SMC cutting solution built for automated material unwinding, ultrasonic contour cutting, weight verification, and line integration. servo ...more

Crosscut Solutions Cut Off Saw.

Used Uhlmann blister packaging machine, model UPS4, unit includes unroll stand, chiller for cold forming, Aylward feeder, vision system, Gottscho, model 812-10 printer, 480 volt, Uhlmann serial# 401, built 1994.

Used Uhlmann blister packaging machine, model UPS 300, with HAPA ProntoPhot printer, type 203, serial# 20832, Uhlmann serial# 491, built 1988.