101 - 150 of 188 listings
Multicam #5000, CNC router, 6.6' x 12' table, 2003, New Fanuc controls 2019, updated software, new spindle in 2023
Cincinnati Rpt Inc | Lincoln Park, MI
Category: Woodworking CNC Routers
Seller: Cincinnati Rpt Inc
Location: Lincoln Park, MI
Mfr: Multicam
Model: 5000
Year: 2003
Spec;s are attached in the pdf. This machien needs nothign, it is in EXCELLENT condition!, Machine, ---------------------------------------------------, Make Multi Cam 5000, Serial Number 5-305-R-04639, Controls Fanuc Oi series – new 2019, Number of Axis 4-axis, Number of Spindles One, new in 2020, Spindle ...more
Multicam #5000-Series, CNC router, ATC, 6' x12'tbl., 20 HP vacuum pump, Fanuc Oi, 2005
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Multicam
Model: 5000-SERIES
Year: 2005
MULTICAM - 5000 5-305-R: CNC Router - 6' x 12' & with ATC80" x 144" Fixed table; moving gantry machine in a front-to-back configuration with: Multi-zone vacuum table supported by: (1) 20 HP Vacuum Pump. : -- (1) 113.6 HP HSD HSK (New in 2020) type routing spindle; liquid cooled with: "Ride-a-long" 8-pos. ...more
Multicam #Apex-3R, CNC router, 5' x10'tbl., 8 ATC, 24k RPM, 10 HP, 2023
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Multicam
Model: APEX-3R
Year: 2023
MULTICAM APEX 3R with 5' X 10' Table and ATC:60" x 120" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 20 HP vacuum blower system. -- :(1) 10 HP "HSD" spindle with 8-position static tool changer, variable speed by inverter up to 24,000 RPM. -- ...more
Multicam #M-Series, CNC Router w/Multi Collet Spindles, 60" x 120" table, (2) 3 HP router spindles, 24000 RPM, 600 IPM speed rate, 2004
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Multicam
Model: M SERIES
Year: 2004
MULTICAM M 304 5' X 10' Table with Multi Collet Spindles:60" x 120" Fixed table w/vacuum holddown, moving gantry bridge, driven by Servo motors using integrated roller bearing rack system. -- :(2) 3 HP Router spindles, variable speed by inverter up to 24,000 RPM, full table coverage on X- and Y-axis, rack ...more
Multicam #M-Series, CNC router, single spindle, 6.5'x12'tbl., 21k RPM, 2004
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Multicam
Model: M-SERIES
Year: 2004
MULTICAM - M 305: 6.5' x 12' CNC Router80" x 145" Fixed table; moving gantry machine in a front-to-back configuration with: Single zone vacuum table supported by a 20 HP ROOTS vacuum system. -- : (1) 7.5 HP COLOMBO Air-Cooled Routing spindle; variable speed by inverter; up to 21,000 RPM. -- Full Table ...more
Get email updates for newly added Woodworking CNC Routers
A woodworking router is a versatile tool that combines the ability to cut, shape, and trim wood. It is used for tasks like creating grooves, edges, and intricate designs. This multi-functional machine is commonly used in woodworking projects such as cabinetry and furniture making for precise detailing and shaping. Different models, including hand-held and table-mounted, offer flexibility for various woodworking applications.
Northtech #NT-555-532, Pin Router, 3-3/8" stroke, 18" 24" steel table, 2-1/4" x 24" adjustable fence, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Northtech
Model: NT-555-532
Year: 2026
NT 555-532 Overarm Pin Router s: -- Spindle speed of 8,900 & 17,800 RPM, Spindle moves up and down pneumatically (3-3/8"; stroke). -- Three depth-of-cut adjustments easily set with turret gauge - micro adjustment. -- 18" 24" Machined Steel table and 2-1/4" x 24" adjustable fence; Tilting table standard (0 - 45). ...more
Northwood #NW-265, CNC router, 72" x60" twin table, 200" X, 68" Y, 12" Z, 18k RPM, 12 ATC, 2001
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Northwood
Model: NW-265
Year: 2001
NORTHWOOD NW-265 CNC ROUTER WITH ATC SPINDLE, DRILLBLOCK, AND MOULDER HEAD -- (2) 72" x 60" Moving tables, machined from 1-1/2" cast aluminum, each with a single vacuum zone; tables can operate independently for load/unload on one table while the other is in process, or together as one large 12' X 5' table. -- ...more
Onsrud #121M, CNC Router, 145" X, 78" Y, 9" Z, 121" x 61" table, 12 HP, 24000 RPM, 10 tool, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 121M
C.R. Onsrud Model 121M CNC Router The M Series may be the smallest moving gantry CNC router in the C.R. Onsrud line-up, but don't be fooled into thinking it's any less of a workhorse than bigger machines in our product line. C.R. Onsrud incorporates the same ed engineering, workmanship and quality of materials ...more
Onsrud #122C, Super Duty Router, 71" X, 156" Y, 11" Z, 120" x 60", 12 tool, 120" x 60" new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 122C
C.R. Onsrud Model 122C Super Duty Router For our customers demanding rigidity and accuracy we deliver with the cast-iron Super Duty Series of CNC router from C.R. Onsrud. When you cut man-made materials most of the time, our heavy, Pro Series machines are fully capable of getting the job done. But, if your primary ...more
JUST ADDED!
Onsrud #122C18C, CNC router, 5' x 10' twin moving tables, 12 ATC, 24000 RPM, 2013
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: 122C18C
Year: 2013
C.R. ONSRUD 122C18C CNC ROUTER (TWIN TABLE & ATC) 5' x 10': -- :Twin 61" x 61" Moving tables can function independently for unload/load on one table while the other is in process, or in tandem as a single 122" x 61" table, each table has a universal type single zone vacuum plenum for use with spoil board ...more
Onsrud #122RH18CDA, CNC Router w/Roller Hold-Down, 5' x 10' Work Envelope, 10 HP, 24000 RPM, 12-Tool ATC, 2017
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: 122RH18CDA
Year: 2017
C.R. ONSRUD 122RH18CDA Roller Hold Down Series with Roller Hold-Down, Boring, ATC, "C" axis, Loading & Off Loading: 5 x10 - Work Envelope. Manufactured in the USA. Designed and engineered utilizing Finite Element Analysis. Fabricated base consisting of heavy steel construction, cast iron bridge and fabricated ...more
Onsrud #145G, CNC Router, 157" X, 78" Y, 11" Z, 18 HP, 24000 RPM, 145" x 61" table, 12 tool, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 145G
C.R. Onsrud Model 145G CNC Router The largest moving gantry CNC router in our line-up is the G Series. This machine is particularly well suited for large, continuous panel and sheet processing operations. This fixed table - moving bridge design saves valuable floor space in your facility, keeps the price down, and ...more
Onsrud #145G12, CNC router, 5' x12'tbl., 12 HP, HSK-63F, 12 ATC, 18k RPM, 2004
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: 145G12
Year: 2004
C.R. ONSRUD 145G12 Moving Gantry 5 X 12 CNC Router with ATC:144" x 60" worktable; machined table with (3) vacuum zones and Matrix Grid, cast iron moving gantry bridge and vertical supports. -- : (1) 12 HP "HSK-63F" Type ATC spindle with side-mounted 12-position carousel and infinitely programmable spindle speeds from ...more
Onsrud #145M, CNC Router, 145" X, 78" Y, 9" Z, 12 tool, 12 HP, 24000 RPM, 145" x 61" table, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 145M
C.R. Onsrud Model 145M CNC Router The M Series may be the smallest moving gantry CNC router in the C.R. Onsrud line-up, but don't be fooled into thinking it's any less of a workhorse than bigger machines in our product line. C.R. Onsrud incorporates the same ed engineering, workmanship and quality of materials ...more
Onsrud #145M12A, CNC Router, 63 tool, OASI Control, 2015
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Onsrud
Model: 145M12A
Year: 2015
2015 CR Onsrud 145M12A CNC Router, Infeed System, Out feed Table, 2 Vacuum pumps, Tool changer, HSK 63 tool holders, Boring block, Oasi Control.
C.R. Onsrud Tech Series #145T12, 3-Axis, 61" x 145" table, 2014
WBP Associates | El Monte, CA
Category: Woodworking CNC Routers
Seller: WBP Associates
Location: South El Monte, CA
Mfr: Onsrud
Model: 145T12
Year: 2014
12 HP HSD Spindle, (2) 10 HP Becker vac. pumps. 12 position auto tool changer. Under power in South El Monte, California.
Onsrud #146C, Super Duty Router, 71" X, 164" Y, 11" Z, 144" x 60" table, 12 tool, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 146C
C.R. Onsrud Model 146C Super Duty Router For our customers demanding rigidity and accuracy we deliver with the cast-iron Super Duty Series of CNC router from C.R. Onsrud. When you cut man-made materials most of the time, our heavy, Pro Series machines are fully capable of getting the job done. But, if your primary ...more
Onsrud #146C18C, CNC router, 5' x12'tbl., 12 ATC, 24k RPM, 18 HP, HSK-63F, 2014
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: 146C18C
Year: 2014
C.R. ONSRUD - Super Duty 146C18: CNC Router (ATC) -- :Moving table CNC Router with: Split 5' x 12' (146" x 60") aluminum worktable in a left to right configuration with multiple vacuum zones.(1) Table is: 5' x 4'; (1) table is: 5' x 8'. Both tables can lock together to form: (1) 5' x ...more
Onsrud #193G, CNC Router, 205" X, 78" Y, 11" Z, 18 HP, 12 tool, 193" x 61" table, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 193G
C.R. Onsrud Model 193G CNC Router The largest moving gantry CNC router in our line-up is the G Series. This machine is particularly well suited for large, continuous panel and sheet processing operations. This fixed table - moving bridge design saves valuable floor space in your facility, keeps the price down, and ...more
Onsrud #193G18D, 5' x16' CNC router, 18 HP, Osai Control, (3) vacuum pumps, 20 HP dust system, 2012
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Onsrud
Model: 193G18D
Year: 2012
CR Onsrud 193G18D CNC Router, 5' x 16' Table, 18 HP Spindle, ATC, Osai Controls, (3) Vacuum Pumps, 20 HP Dust System, Vacuum Lift for material handling.
Onsrud #241G, CNC Router, 263" X, 78" Y, 11" Z, 18 HP, 12 tool, 24000 RPM, 241" x 61" table, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 241G
C.R. Onsrud Model 241G CNC Router The largest moving gantry CNC router in our line-up is the G Series. This machine is particularly well suited for large, continuous panel and sheet processing operations. This fixed table - moving bridge design saves valuable floor space in your facility, keeps the price down, and ...more
Onsrud #241G18D Pro Series CNC Router, 2016
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Onsrud
Model: 241G18D
Year: 2016
- Dual Supported Gantry: Enhances stability and precision with independent servo motors and drives on both sides., - 18 HP Spindle: High-power, fully programmable, and capable of reaching 24,000 RPM, suitable for a wide range of routing and drilling tasks., - 5'x20' Phenolic Vacuum Grid Table: Ensures superior ...more
Onsrud #288-G18, CNC Router, 61" x 288", 2009
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Onsrud
Model: 288-G18
Year: 2009
CR Onsrud 288 G18 CNC Router, Size: 61" x 288", Machine Head : Main Head 18Hp HSK63F w/12 Position ATC, 18 Hp Spindle – Powering through materials like a hot knife through butter., Accessories: 40 Hp Dekker V- Maxx Vacuum Pump, 24,000 RPM, 12 Tool Capacity, 11" Z- Stroke, Machine Table: Zone Plumbed Vacuum ...more
Onsrud #3100M, CNC Router, 152" X, 99" Y, 9" Z, 12 HP, 24000 RPM, 12 tool, 2.1M x 3.1M table, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 3100M
C.R. Onsrud Model 3100M CNC Router The M Series may be the smallest moving gantry CNC router in the C.R. Onsrud line-up, but don't be fooled into thinking it's any less of a workhorse than bigger machines in our product line. C.R. Onsrud incorporates the same ed engineering, workmanship and quality of ...more
Onsrud #333G, CNC Router, 345" X, 78" Y, 11" Z, 18 HP, 24000 RPM, 12 tol, 333" x 61" table, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 333G
C.R. Onsrud Model 333G CNC Router The largest moving gantry CNC router in our line-up is the G Series. This machine is particularly well suited for large, continuous panel and sheet processing operations. This fixed table - moving bridge design saves valuable floor space in your facility, keeps the price down, and ...more
Onsrud 36210, Inverted Pin Router, 36" throat capacity, 10 HP belt drive, 3" spindle travel, 43-1/2" x 31-1/2" table, 1991
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: 36210
Year: 1991
C R ONSRUD 36210 Inverted Router with Vacuum hold down.: -- 36" Throat cap., 10 HP V-belt drive motor with a Short Stop electric brake. -- Heavy Duty spindle with oil mist lubrication, 0" - 3" spindle travel, pneumatically controlled by foot pedal. -- Template mounts on top of the workpiece, retractable pin & ...more
Onsrud #4100M, CNC Router, 199" X, 99" Y, 90" Z, 12 HP, 24000 RPM, 12 tool, 2.1M x 4.1M table, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 4100M
C.R. Onsrud Model 4100M CNC Router The M Series may be the smallest moving gantry CNC router in the C.R. Onsrud line-up, but don't be fooled into thinking it's any less of a workhorse than bigger machines in our product line. C.R. Onsrud incorporates the same ed engineering, workmanship and quality of ...more
Onsrud #429G, CNC Router, 441" X, 78" Y, 11" Z, 18 HP, 24000 RPM, 12 tool, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 429G
C.R. Onsrud Model 429G CNC Router The largest moving gantry CNC router in our line-up is the G Series. This machine is particularly well suited for large, continuous panel and sheet processing operations. This fixed table - moving bridge design saves valuable floor space in your facility, keeps the price down, and ...more
Onsrud #5-Axis-Pro-Series, CNC Router, Dual Supporton, 3 vacuum zones,
Pioneer Machine Sales | Rosenberg, TX
Category: Woodworking CNC Routers
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Onsrud
Model: 5-AXIS-PRO-SERIES
Needing 5-axis capabilities? Start with our very popular Pro Series moving gantry CNC platform and add our reliable 2-axis articulating head. The C.R. Onsrud 5-Axis Pro Series CNC router delivers you the additional cutting angles you need within a floor-space saving platform. It also offers the production flexibility ...more
Onsrud #5-Axis-Pro-Series, CNC router
Pioneer Machine Sales | Rosenberg, TX
Category: Woodworking CNC Routers
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Onsrud
Model: 5-AXIS-PRO-SERIES
So you need it all. Oversized part machining - check. 5-axis capability - check. Custom part holding/fixturing devices - check. Our Custom Pro moving gantry CNC platform outfitted with the power of our articulating 2-axis head delivers. The one-piece thick-wall engineered steel base of the 5-Axis Custom Pro Series CNC ...more
Onsrud #5100M12, router, 200" x 82.6" table, 12 HP, 24000 RPM, HSK-63 taper, 204" X, 84" Y, 9" Z, 2019
Machine Tool Technologies | Milwaukee, WI
Category: Woodworking CNC Routers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Onsrud
Model: 5100M12
Year: 2019
Lightly used 2019 CR Onsrud 5100M12 Router. Less than 50 hours and under power and available to be inspected., Table-W 200" Table-L 82.6" Power 12 hp RPM 24,000 RPM Taper HSK-63 X 204" Y 84" Z 9" Fanuc Oi Handheld Machine Controller System, 12 Station Automatic Tool Changer, HSD ES929 Spindle, Integrated Dust ...more
Onsrud #97M, CNC Router, 126" X, 65" Y, 9" Z, 10 tool, 12 HP, 24000 RPM, 97" x 49" table, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 97M
C.R. Onsrud Model 97M CNC Router The M Series may be the smallest moving gantry CNC router in the C.R. Onsrud line-up, but don't be fooled into thinking it's any less of a workhorse than bigger machines in our product line. C.R. Onsrud incorporates the same ed engineering, workmanship and quality of materials ...more
Onsrud #98C Super Duty Router, 71" X, 124" Y, 11" Z, 18 HP, 24000 RPM, 12 tool, new
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 98C
C.R. Onsrud Model 98C Super Duty Router. For our customers demanding rigidity and accuracy we deliver with the cast-iron Super Duty Series of CNC router from C.R. Onsrud. When you cut man-made materials most of the time, our heavy, Pro Series machines are fully capable of getting the job done. But, if your primary ...more
Onsrud #615DG24H8, Multiple Spindle CNC Router, dual gantry w/ 4 spindles each, 24 HP, 240000 RPM, 5' x 51' table, 2018
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: PRO SERIES
Year: 2018
C.R ONSRUD - Pro Series 615DG24H8 "Dual Gantry Series" CNC router with ATC Multi spindles:5' X 51' working table with Multi spindles and Dual Gantry aluminum non-vacuum table. -- s:Dual Gantry each with (4) spindles, each gantry has its own 12 position hide away tool changer. -- Thermal Heat Treated:Stress ...more
Onsrud #Pro-Series, CNC Router, 3 vacuum zones
Pioneer Machine Sales | Rosenberg, TX
Category: Woodworking CNC Routers
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Onsrud
Model: PRO-SERIES
So you need it all. Oversized part machining - check. 5-axis capability - check. Custom part holding/fixturing devices - check. Our Custom Pro moving gantry CNC platform outfitted with the power of our articulating 2-axis head delivers. The one-piece thick-wall engineered steel base of the 5-Axis Custom Pro Series CNC ...more
Onsrud #Pro-Series-145G12, CNC router, 5' x12'tbl., 12 ATC, HSK-63F, 24k RPM, rake / unloading, 2018
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: PRO-SERIES-145G12
Year: 2018
C.R. ONSRUD - Pro Series 145M12A: 5' x 12' with ATC, Boring, Rake, Offload -- :"Panel Pro" Series; moving gantry CNC Router with a 61" x 145" worktable; 11" Z-axis stroke; machined table with (2) vacuum zones, cast iron moving gantry bridge, and vertical supports.:(1) 12 HP "HSK-63F" Electro spindle ...more
Onsrud Inverted Router
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Onsrud
CR Onsrud Inverted Router, more information to follow.
Pro Edge Technology #PET2440-LD, CNC router, 3-Axis, Lockdowel insertion machine, 2024
ACT Machinery | Fullerton, CA
Category: Woodworking CNC Routers
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Pro Edge Technology
Model: PET2440-LD
Year: 2024
, Manufacturer, Pro Edge Technology, MAXIMUM LENGTH OF PART (USING 1 ZONE), 96 inches, MAXIMUM THICKNESS OF PART, 2 inches, 4 INDEPENDENT ZONES, 23.6 inches, CENTER STOP FOR ZONES 2 & 3, Raised and lowered by CNC, ELECTRO SPINDLE, 4,000 - 24,000 RPM, SPEEDS FOR X/Y/Z, X = 131 fpm / Y = 32 fpm / Z = 32 fpm ...more
SCM #Accord-25FX-M, flat table machine, 4' x20'tbl., 16 ATC, 242.9" X, 51.9" Y, 17.3." Z, 24k RPM, HSK F63, 16 HP, 2021
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACCORD-25FX-M
Year: 2021
SCM - ACCORD 25 FX -M: CNC Machining Center (w/ATC) -- 4' x 20' Aluminum "MATRIX" grid 2-zone vacuum table. -- Working Capacity"X" Axis: 242.9" (6,170 mm); "Y" axis: 51.9" (1,320 mm); "Z" axis stroke: 17.3" (440 mm) & 9.8" (250 mm) Max. material thickness. -- Positioning Speed"X" & "Y" Axis 197 FPM (60 ...more
SCM #Accord-25FX-M, flat table machine, 4' x20'tbl., 16 ATC, 242.9" X, 51.9" Y, 17.3." Z, 24k RPM, 2022
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACCORD-25FX-M
Year: 2022
SCM - ACCORD 25 FX-M: CNC Machining Center (w/ATC) -- 4' x 20' Aluminum "MATRIX" grid 2-zone vacuum table. -- Working Capacity"X" Axis 242.9" (6,170 mm); "Y" axis 51.9" (1,320 mm); "Z" axis stroke 17.3" (440 mm); 9.8" (250 mm) max. material thickness. -- Positioning speed"X" & "Y" Axis 197 FPM (60 MPM); ...more
SCM #Accord-25FX-M, flat table machine, 4' x20'tbl., 16 ATC, 242.9" X, 51.9" Y, 17.3." Z, 24k RPM, HSK F63, 16 HP, 2020
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACCORD-25FX-M
Year: 2020
SCM - ACCORD 25 FX -M: CNC Machining Center (w/ATC) -- 4' x 20' Aluminum "MATRIX" Grid 2-zone vacuum table. -- Working Capacity"X" Axis: 242.9" (6,170 mm); "Y" axis: 51.9" (1,320 mm); "Z" axis stroke: 17.3" (440 mm); 9.8" (250 mm) max. material thickness. -- Positioning Speed"X" & "Y" Axis: 197 FPM (60 ...more
SCM Morbidelli Universal 3612, 2008
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scm
Model: MORBIDELLI UNIVERSAL 3612
Year: 2008
2008 SCM Morbidelli Universal 3612.
SCM #Pratix-S-12-B, Flat Table Machine w/ATC/Boring, 4' x 8' Table, 98" X, 49.4" Y, 9.8" Z, 5.9" thickness, 115 FPM X & Y, 82 FPM Z, 2015
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: PRATIX S
Year: 2015
SCM - PRATIX S-12-B: Flat Table Machine (w/ATC/Boring) -- Single 4' x 8' traveling "Bridge Gantry" and stationary aluminum dual vacuum table with: "MATRIX" square grid pattern for fixturing parts.Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested ...more
SCM #Pratix-S, CNC Flat Table, 4' x 8' table, 98" X, 49.4" Y, 9.8" Z, 5.9" max. thickness, 9 HP, 24,000 RPM, 8 ATC, Xilog Plus, 600 Volt, 2013
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking CNC Routers
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Scm
Model: PRATIX-S
Year: 2013
2013 SCM Pratix-S used Flat table CNC. Owner had to upgrade to a large machine. In use today and available in approx 1 to 2 weeks. New machine is being set up.For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click ...more
SCM #Pratix-S-15A, CNC Router, 5' x 12', 24000 RPM, 7.5 HP / 9 HP, 2012
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scm
Model: PRATIX-S-15A
Year: 2012
Worktable dimensions: 145″ x 61″, Z -Axis stroke: 9.84″, Spindle speed: 24,000 RPM, Electrospindle (S1/S6 rating): 7.5 HP / 9HP, Tool Changer: 10 position, Spindle Taper: HSK 63, Boring Block (7) Spindles: 6,000 RPM, Maximum positioning vectorial speeds:, X/Y axis: 115 feet/minute, Electrics: ...more
SCM #R8, woodworking overarm pin router, 29.5" throat, 4" spindle travel, 1981
MD Equipment Services LLC | Crooked River, OR
Category: Woodworking CNC Routers
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Scm
Model: R8
Year: 1981
Pin Router, Manufacturer: SCM, Model: R-8, DOM (circa): 1981, Electrics: 230-460 Volt, 3 Phase, 60 Hz, Main Motor: 6.6 HP, s and :,.Throat Clearance: 29.5",.Spindle Speed: 10,000 - 20,000 RPM,.Spindle Travel: 4",.Collet Size: 1/4" - 5/8",.Six (6) Adjustable Depth Settings,.Non-Tilting Work Table: ...more
SCM Routech #Record-100-NT, CNC Router, Tubeless Vaccum (TNV), 600-2400 rpm, 2010
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scm
Model: RECORD-100-NT
Year: 2010
Tubeless Vaccum (TNV), Electro-Spindle with HSK63F quick release Toolholder, Rotation speed 600-2400 rpm, Air Cooling by rear electrofan, Static Inverter, Centralized dust collection system with automatic blast gates.
SCM #Routech, 5-Axis Work Cell, 48" x 120" max Workpiece Size, 126" L x 51" width x 2.4" thick Panel Size, 13.5/16 HP, 480 V
RT Machine | Hughesville, PA
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Scm
Model: ROUTECH
SCM Routech 5-Axis Work Cell Includes (2) Mahros Vacuum Stackers on Infeed/Outfeed of the Work Cell & (2) SCM Routech 5-Axis CNC Routers (2) Mahros Vacuum Loader/Stacker for Panels Double Row Machine Maximum Panel Weight Per Cycle 100 kg (220 lbs) Speed - 10 Cycles/min with 50 kg panel and Max Width of 600mm or 9 ...more
SCMI #Pratix-N-15, CNC router, 5' x 12' table, scissor lift, outfeed table, (2) 10 HP vacuum pumps, 2014
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scmi
Model: PRATIX-N-15
Year: 2014
SCMI Pratix CNC Router, 5x12 Table, Scissor Lift, Outfeed Table, (2) 10 HP Vacuum Pumps, Transformer, Ready to load!.
SCMI #R-8, Pin Router, 30" x36" non-tilting table, 6.6 HP, 1/4"-5/8" collet size, 6 adj. spindle depth, 4" spindle travel, 29.5" throat
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scmi
Model: R-8
Electric:230 Voltage 3 Phase, Aporox 6.6 HP, 1/4" to 5/8" collet size, 6 adjustable spindle depths, 4" spindle travel, 29.5" throat depth, 30" x 36" non-tilting cast iron table, 7-7/8" vertical table movement, Note: There may be some variances in the above s.
