51 - 100 of 246 listings
1-1/4" Pines #1400, pipe & tube bender, manual clamps, AB PLC Control, 5 HP, 1996, #71651
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pines
Model: 1400
Year: 1996
SERIAL. 96-009, MODEL. 1400, YEAR NEW. 1996, NON-FERROUS TUBE Y.P. TO 25,000 PSI. 1-1/4" O.D. X.065" WALL, STEEL TUBE Y.P. TO 40,000 PSI. 1-1/8" O.D. X.065" WALL, STEEL PIPE SCHEDULE 80. 1/2", ROUND BAR MILD STEEL. 3/4", S.S. TUBE Y.P. TO 60,000 PSI. 7/8" O.D. X.065" WALL, MAXIMUM BEND ANGLE. 195 DEGREES, BEND ANGLE. ...more
1-1/4" Pines #3T, vertical tube/pipe bender, Teledyne Pines Digital Dial-A-Bend Control
Wheeler Machinery Sales | Pomona, CA
Category: Tube and Pipe Benders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Pines
Model: 3T
Pines #3T Vertical Tube/Pipe Bender #7540 #1, ROUND TUBING (NON FERROUS) 1.25" X.083" WT, ROUND TUBING (MILD STEEL) 1.25" X.065" WT, ROUND TUBING (STAINLESS STEEL) 1.25" X.049" WT, SQUARE TUBING (MILD STEEL) 1" X.065" WT, ROUND BAR 3/4", SQUARE BAR 9/16", WING DIE TONNAGE MIN.5 TONS, WING DIE TONNAGE MAX 3 TONS ...more
1-1/4" Pines #3T, tube bending press, 1-1/4" dia x .065" wall thickness, 1500 bends/hr, 15 HP
Hariton Machinery Co Inc | Bridgeport, CT
Category: Tube and Pipe Benders
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Pines
Model: 3T
Used Used Pines Model 3T Tube Bending Press, S/N-44350-61283, Maximum Tube Size 1-1/4" Dia. x.065 Wall Thickness, 5 Ton Unit, Up to 1500 Bends/Hour, Electrics: 15 H.P., Weight: 3,500 Lbs., Dimensions: 8' x 2-1/2' x 5' T.
1.251" Dynobend #DB-60-SL, U-tube bender, complete line, 2011
National Machinery Exchange | Newark, NJ
Category: Tube and Pipe Benders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Dynobend
Model: DB-60-SL
Year: 2011
DYNOBEND #DB60SL U-TUBE BENDER, BRAND: DYNOBEND, MODEL: DB 60 SL, NEW APPROX.: 2011, TECHNICAL, MAX. DIAMETER OF TUBE ( 1.251 ") 31.75 MM, MAX. BENDING RADIUS ( 47.28 ") 1200 MM, COMPLETE LINE FOR U-TUBES THAT ARE PRIMARILY USED FOR LARGE HEAT EXCHANGERS, THE LINE IS PRODUCING A COMPLETE SET OF U-TUBES OF DIFFERENT ...more
1-1/2" BPR #CP20, pyramid tube & pipe bender, 3/4"shaft diameter, 3-1/4"roll diameter, 1/2 HP, 9 FPM, 1999
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bpr
Model: CP20
Year: 1999
SERIAL. 99A0013MODEL. CP20YEAR NEW. 1999SHAFT DIAMETER. 3/4"ROLL DIAMETER. 3-1/4" CAPACITY. 3/4" X 3/4" CAPACITY TUBING. 1-1/2" CAPACITY SOILD. 1/2"CAPACITY FLAT BAR. 1-3/4"X 3/8" ROLLING SPEED. 9 FPM MOTOR HORSEPOWER. 1/2.
Get email updates for newly added Tube and Pipe Benders
Tube, pipe, and bar bending machines are tools used to manually manipulate metal or plastic pipes, tubes, and solid bars into various angles and curves without requiring computer control. These machines are commonly utilized in fields such as construction, plumbing, automotive, and manufacturing, where customized pipe layouts or structural components are needed. Manual benders are particularly valued for their portability, simplicity, and ability to offer precise control over small production runs or bespoke projects.
1-1/2" HMT #F38, Twin Head Compression Bender, 240 V.
McKean Machinery Sales Inc | Cleveland, OH
Category: Tube and Pipe Benders
Seller: McKean Machinery Sales Inc
Location: Cleveland, OH
Mfr: Hmt
Model: F38
HMT F38 TWIN HYDRAULIC COMPRESSION BENDER :, -- SERIAL: 110529 583B -- BENDING CAPACITY / ROUND TUBE / NON-FERROUS 1.50 X.188" -- STEEL TUBING (YIELD TO 40,000PSI) - 1.50" X.098" -- BENDING CAPACITY / ROUND TUBE / STAINLESS - 1.250" X 0.065" -- BENDING CAPACITY / SQUARE TUBE / MILD STEEL - 1.00" X 0.083" -- BENDING ...more
1-1/2" Langbow #TM38, twin head bender, 2 hand control cycle start, 2 hand cycle start pedestal
AM Industrial | Brook Park, OH
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Langbow
Model: TM38
Capacities:, Maximum tube diameter: 1-1/2” OD (round tube)Maximum distance between centers: 72”Great for high-production round and square and rod bendingCabable of running two parts at a time each with two bendsIncludes:, 2-Hand Control Cycle StartEach head has its own degree of bend settingIntegrated ...more
1-1/2" Pines #1, horizontal tube bender
Deal Makers Machinery | Thousand Oaks, CA
Category: Tube and Pipe Benders
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Pines
Model: -
PINES # 1 HORIZONTAL TUBE BENDER Price: $5,950 Subcategory: Miscellaneous - Bending & Forming Machines Manufacturer: Pines Model: # 1 Condition: Used, 1-/1/2 " CAPACITY.
1-1/2" Pines #1, horizontal hydraulic tube bender, hydraulic mandrel extractor, automatic lube, #15028
Yoder Brothers Machinery | Toledo, OH
Category: Tube and Pipe Benders
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Pines
Model: -1
Dimensions145" x 44" x 43" Weight4100 pounds, MANUFACTURER. PINES MODEL. #1 CAPACITY: ROUND TUBING (NON FERROUS). 1-1/2" X 0.188" WT ROUND TUBING (FERROUS). 1-1/2" X 0.109" WT ROUND TUBING (STAINLESS). 1-3/8" X 0.065" WT SQUARE TUBING (MILD STEEL). 1-1/8" X 0.012" WT ROUND BAR. 1-1/8" SQUARE BAR. 1" MAX. BEND ANGLE. ...more
1-1/2" Pines #1, horizontal mandrel tube bender
Holland Equipment Hunters Inc | Hamilton, MI
Category: Tube and Pipe Benders
Seller: Holland Equipment Hunters Inc
Location: Hamilton, MI
Mfr: Pines
Model: -1
Year: 2013
Type:Tube Machinery, Benders, Pipe, Tube, & BarManufacturer:PINESModel:# 1Stock #:2013Status:For SaleSerial #:N/A.
1-1/2" Pines #1, mandrel extractor, counter clockwise bending rotation, Tag #15878
Yeoman Machinery Corp | Elkhart, IN
Category: Tube and Pipe Benders
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Pines
Model: -1
1-1/2" x .120" Pines #1, horizontal tube bender, #3340
Universal Tube & Rollform | Perrysburg, OH
Category: Tube and Pipe Benders
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Pines
Model: 1
UTUBE NUMBER: 3340, MANUFACTURER: PINES, MODEL NUMBER: 1, SERIAL NUMBER: 11040 – 71236, YEAR: 1971, Round Tube:, Maximum Tube Diameter: 1-1/2″ (38.1 mm), Maximum Wall Thickness.109″ (2.76 mm), Maximum Yield Pressure: 40,000 PSI, 1″ (25.4 mm) Schedule 80 Steel, Square Tube:, Maximum Tube ...more
1.5" Pines #14T, vertical tube bender
AM Industrial | Brook Park, OH
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 14T
Product, Stock Number AM22347 Brand Pines Capacity 1.50 inches, 1.5” Pines #14T Vertical Tube Bender, Pines high production hydraulic vertical tube bending machineModel: 14T Serial: M54352Capacities:, Tube {round}: 1-1/2” x.065” wall (mild steel)Production capacity 2 tube per stroke: 1,000 bends/hour ...more
1-1/2" Pines #3/4, hydraulic rotary tube bender, stationary mandrel rod & holder, die holder, 5" maximum radius, 9'11" tube length
G-2000 | Toledo, OH
Category: Tube and Pipe Benders
Seller: G-2000
Location: Toledo, OH
Mfr: Pines
Model: 3/4
MACHINE :, Maximum Radius: 5" (Approximate), Maximum Tube Length: 9′ 11", Standard Operating Pressure: 1,000 PSI, Bending Arm Speed: 27 RPM, Floor to Centerline of Bending Form: 35", Rotation: Counter-Clockwise, Maximum Bend Angle: 180 Degrees + Overbend, Panel Mounted Hydraulic Valves, Oil Reservoir in Base ...more
1-1/2" Pines #3T, vertical tube bender, 3 ton capacity, 20 HP, s/n #44361-88014
D & D Industries Inc | Monclova, OH
Category: Tube and Pipe Benders
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Pines
Model: 3T
MODEL #: 3T, SERIAL #: 44361-88014, CAPACITY: 1-1/2", 3 TON CAPACITY, DIAL A BEND DIGITAL BENDING CONTROLS, 1500 BENDS PER HOUR, BEND ANGLE 140 DEGREES<165 DEGREES SPECIAL TOOLING, 30" x 80" x 5' TALL, 3000#, MOTOR: 20 HP.
1-1/2" Pines #5T, vertical tube bender, 1" tooling, pedestal control
National Machinery Exchange | Newark, NJ
Category: Tube and Pipe Benders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pines
Model: 5T
Dial-A-Bend Up to 1-1/2" Diameter, 1" Tooling, 20 HP, 230/460 Volt, 3/60/1750 RPM, Pedestal Control.
1-1/2" Pines Co., hydraulic tube bender, 220 V., 3-phase, S/N 11015-64033
FMI Trading LLC | Vinton, TX
Category: Tube and Pipe Benders
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Pines
Product Information, Tube Benders Type:Hydraulic Bending radius:180° Dies:Square 3/4" HP:5 Voltage / Phase:220 | 3 Dimensions:39" x 148" x 40" Capacity:1-1/2", Product Code: 03040112178 Make: Pines Engineering Co. Model: S/M Serial Number: 11015-64033 Condition: Used.
1-1/2" Richards #MUB001, hydraulic bender, Enerpac power unit, tooling, #68712
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Richards
Model: MUB001
MODEL. MUB 001, CAPACITY ROUNDS MILD STEEL. 1-1/2", CAPACITY SQUARE MILD STEEL. 1-1/2", CAPACITY REBAR. 3/4", CAPACITY PIPE SCHEDULE 40. 2", CAPACITY MILD STEEL FLAT. 1/2" X 4", CAPACITY MILD STEEL FLAT. 5/8" X 3", CAPACITY MILD STEEL FLAT. 3/4" X 2", CAPACITY ANGLES MILD STEEL. 1/4" X 2", PIERCING HOLES. 1/2" @ 1/4" ...more
1-1/2" Teledyne Pines #3T, vertical hydraulic tube bender, 1989
D & D Industries Inc | Monclova, OH
Category: Tube and Pipe Benders
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Teledyne
Model: 3T
Year: 1989
Capacity: 1 1/2” OD Capacity x.065” wall thickness, Digital Dial a Bend Control, Bending Angle Max: 140º, 2000 PSI Operating Pressure, 1500 Bends per hour, Max Centerling Radius: 4.5” - 90º or less, Min Centerline Radius: 2 to 3 times tube diameter, Work Height: 40”, Motor: 20 HP ...more
1-1/2" Teledyne Pines #1-1/2", vertical hydraulic tube bender,.065"wall thickness, #14237J
Timco Inc | Columbia, TN
Category: Tube and Pipe Benders
Seller: Timco Inc
Location: Columbia, TN
Mfr: Teledyne Pines
Model: 1-1/2
TELEDYNE PINES VERTICAL HYDRAULIC TUBE BENDER, STOCK# 14237J, Serial# 44361-89098, Capacity: 1 1/2 OD Capacity x.065 wall thickness, Digital Dial a Bend Control, Bending Angle Max: 140, 2000 PSI Operating Pressure, 1500 Bends per hour, Max Centerling Radius: 4.5 - 90 or less, Min Centerline Radius: 2 to 3 times tube ...more
1-5/8" Wallace #50-1/58, hydraulic tube bending machine, 12" radius, 7' 5" tube length, 5 HP, #54236
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wallace
Model: 50-1/58
SERIAL. 9017-1, MODEL. 50 - 1/58, CAPACITY. 1-5/8", I.P.S. EXTRA HEAY PIPE. 1-5/8", NON FERROUS TUBING. Y.P. TO 12,000 PSI, 3" O.D. X.120 WALL, STEEL TUBING. Y.P. TO 40,000 PSI, 2-3/4" O.D. X.072 WALL, MAXIMUM RADIUS. 12", MAXIMUM TUBE LENGTH. 7'5", BENDING ARM SPEED AVERAGE. 11 RPM, MOTOR. 5 HP.
1.66" Pines #2 Tube Bender
AM Industrial | Brook Park, OH
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 2
Product, Stock Number AM22402 Brand Pines Capacity 3.00 inches, 3″ Pines 2 Tube Bender, Pines horizontal mandrel tube bending machineModel: #1-1/4:, Minimum bending capacity: 1/4″ ODMaximum bending capacity: 2.5″Round tube (non-ferrous): 3” x.065” wallRound tube (stainless steel): ...more
2" American #ET2100-5SA-H, weld & hydraulic ram bender, 10 HP, 0-180°, 1996, #51196
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: American
Model: ET2100-5SA-H
Year: 1996
SERIAL. 8075, MODEL. ET2100-5SA-H, YEAR NEW. 1996, TONAGE. 30 TON & PSI, CAPACITY. 1/2 TO 3" TUBE, CAPACITY SOLID BAR. 1" BAR, DEGREE OF BEND. 0 - 180, BEND RADIUS. 3" TO 6", DOUBLE WING. YES, DIE CHANGE TIME. 1 MINUTE, FOOT PEDAL CONTROL. YES, MOTOR. 10 HORSEPOWER.
2" Bailegh #RDB-175, Rotary Draw Tube & Pipe Bender, 1/4" min. O.D., 9" max CLR, 110 V, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Tube and Pipe Benders
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Bailegh
Model: RDB-175
Baileigh RDB-175 2″ Rotary Draw Tube & Pipe Bender, Inventory # 2827, Model: RDB-175, Made in USA, Mild Steel Capacity:, Pipe: 2″ Sch. 40, Round Tube: 2 1/2″ (1/8″ Wall), Solid Rod: 1″, Stainless Steel Pipe: 1 1/2″ Sch. 40, Stainless Steel Tube: 2 3/8″ (1/8″ Wall) ...more
2" Bailegh #ROB-250, schedule 40 tubing bender, electric foot pedal, on casters
Greenway & Associates Ltd | Orange City, IA
Category: Tube and Pipe Benders
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Bailegh
Model: ROB-250
, Electric foot pedal, Programmable control w/170 jobs, 6 bending speeds, On casters.
2" Baileigh #R-H45, hydraulic roll bender, 220 V., 3-phase, 1.77" shaft diameter
Lenmark Industries | Langley, BC
Category: Tube and Pipe Benders
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Baileigh
Model: R-H45
SKU: 118427, Model: R-H45, Condition: New, Capacity: 2", Electrical :, Voltage: 220 volts, Phase: Single-phase, Additional :, Stock Number: BA9-1006835, Type: Hydraulic, Round Tube Capacity Size: 2.75", Square Tube Capacity: 2", Solid Round Capacity Size: 1.5", Flat Bar Easy Way Size: 4" ...more
2" Baileigh #R-M55H, profile bender, 220 V., 1-phase, 1.96" shaft
Lenmark Industries | Langley, BC
Category: Tube and Pipe Benders
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Baileigh
Model: R-M55H
SKU: 118426, Model: R-M55H, Condition: New, Electrical :, Voltage: 220 volts, Phase: Single-phase, Additional :, Stock Number: BA9-1006859, No. of Rolls: 1 forming roll, 2 driven bottom rolls, Pipe Capacity: 2", Round Tube Capacity: 2.75", Square Tube Capacity: 2", Flat Bar Easy Way: 4", Shaft ...more
JUST ADDED!
2" Baileigh RMD #RDB-125, hydraulic pipe & tube bender
Heavy Wall Consulting | Long Beach, CA
Category: Tube and Pipe Benders
Seller: Heavy Wall Consulting
Location: Unionville, NY
Mfr: Baileigh
Model: RDB-125
Year: 2010
2010 American made 2" pipe bender, located in Unionville, NY near the NJ border., The bender is not in the prettiest condition, but functions perfectly well., This includes a lot of tooling, message for., Local pickup or message us for a shipping quote., Maximum Material Capacities, Mild Steel Round Tube (OD): up to ...more
2" Baileigh #RDB-150, Hydraulic Rotary Draw Tube And Pipe Bender, 9.5" CLR
Smith Machinery Co | Ames, IA
Category: Tube and Pipe Benders
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Baileigh
Model: RDB-150
Minimum CLR.5 inches Minimum OD.25 inches Mild Steel Solid Rod 1 inches Mild Steel Pipe Schedule 40 2 inches Mild Steel Round Tube Wall 2.5 inches Mild Steel Square Tube (Wall) 2 inches Stainless Steel Pipe Schedule 40 1.5 inches Stainless Steel Round Tube Wall 2.375 inches Chromolly Round Tube Wall 2 inches Aluminum ...more
2" Baileigh #RDB-150, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Tube and Pipe Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: RDB-150
Schedule 40 Mild Steel Pipe 2" Aluminum Pipe 2" Stainless Steel Pipe 1.5" Mild Steel Round Tube 2.5" Mild Steel Round Tube Wall 0.125" Aluminum Round Tube 2.5" Aluminum Round Tube Wall 0.156" Stainless Steel Round Tube 2.375" Stainless Steel Round Tube Wall 0.125" Chromolly Round Tube 2" Chromolly Round Tube Wall ...more
2" Baileigh #RDB-150-AS, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150AS
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Tube and Pipe Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: RDB-150-AS
Schedule 40 Mild Steel Pipe 2" Aluminum Pipe 2" Stainless Steel Pipe 1.5" Mild Steel Round Tube 2.5" Mild Steel Round Tube Wall 0.125" Aluminum Round Tube 2.5" Aluminum Round Tube Wall 0.156" Stainless Steel Round Tube 2.375" Stainless Steel Round Tube Wall 0.125" Chromolly Round Tube 2" Chromolly Round Tube Wall ...more
2" sch 40 Baileigh #RDB-150AS, hydraulic, 180° bends in one shot, auto-stop for repeat bends, new
AR Tools & Machinery Inc | Spokane, WA
Category: Tube and Pipe Benders
Seller: AR Tools & Machinery Inc
Location: Spokane Valley, WA
Mfr: Baileigh
Model: RDB-150AS
Year: 2023
Item Number RDB-150-AS Country of Manufacture United States Minimum CLR.5" Minimum OD.25" Mild Steel Solid Rod 1" Mild Steel Pipe Schedule 40 2" Mild Steel Round Tube Wall 2.5" (.125) Mild Steel Square Tube (Wall) 2" (.125) Stainless Steel Pipe Schedule 40 1.5" Stainless Steel Round Tube Wall 2.375" (.125) Chromolly ...more
2" Baileigh #RDB-175, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB175
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Tube and Pipe Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: RDB-175
Schedule 40 Mild Steel Pipe 2" Aluminum Pipe 2" Stainless Steel Pipe 1.5" Mild Steel Round Tube 2.5" Mild Steel Round Tube Wall 0.125" Aluminum Round Tube 2.5" Aluminum Round Tube Wall 0.156" Stainless Steel Round Tube 2.375" Stainless Steel Round Tube Wall 0.125" Chromolly Round Tube 2" Chromolly Round Tube Wall ...more
JUST ADDED!
2" x 9.5" Bentec #BT-3000, Hydraulic Tube & Pipe Bender, 15 Ton, 5 HP, w/ dies
Mullin Machinery | Farmingdale, NJ
Category: Tube and Pipe Benders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Bentec
Model: BT-3000
Product BENTEC BT-3000 HYDRAULIC BENDERRam Force: 15 TonsMotor: 5 HP, 230V 3-phaseRam Speeds: 57 IPM (Forward), 75 IPM (Reverse)Maximum Pipe Capacity: 2″ pipe up to 80″ length and 9.5″ diameter radiusSolid Bar Capacity (Round): 1.75″ x 8.25″WITH A LARGE SELECTION OF MISC DIES.
2" Chiao Sheng #A50TNCPB, 2-Axis semi-automatic pipe bender, #104786
R.A.B. Industries Inc | Washington, MI
Category: Tube and Pipe Benders
Seller: R.A.B. Industries Inc
Location: Imlay City, MI
Mfr: Chiao Sheng
Model: A50TNCPB
Year: 2016
1-USED CHIAO SHENG TWO AXIS A50TNCPB SEMI AUTOMATIC 2" TUBE BENDER.
2" Clark & Lewis #CL200, Horizontal Tube Bender, Split Die Actuator, Pedestal Mounted Controls, 1977, Tag #15756
Yeoman Machinery Corp | Elkhart, IN
Category: Tube and Pipe Benders
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Clark & Lewis
Model: CL200
Year: 1977
2" Clark & Lewis #CL200HD, Bender, S/N 1247, Draw Type
Smith Machinery Co | Ames, IA
Category: Tube and Pipe Benders
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Clark & Lewis
Model: CL200HD
CAPACITY:, ROUND TUBE:, 25000 PSI Y.P. -NON FERROUS ----------- 2.5 in x.203 in, 40000 PSI Y.P. -FERROUS --------------- 2.5 in x.109 in, 60000 PSI Y.P. -STAINLESS STEEL ------- 2.0 in x.125 in, SCHEDULE 80 STEEL PIPE (IPS) ----------- 1.5 in, ROUND BAR MILD STEEL ------------------- 1-3/8 in, CENTERLINE RADIUS (MAX. ...more
2" Ercolina #050KD, Top Bender, 1.2 RPM, programmable
Smith Machinery Co | Ames, IA
Category: Tube and Pipe Benders
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Ercolina
Model: 050KD
BEND CAPACITY:, 2 in SCHEDULE 40 PIPE A53-A STEEL, 2-1/2 in O.D. ROUND TUBE - 0.157 in WALL (ELECTRIC RESISTANCE, WELD MILD STEEL TUBE), 2 in SQUARE TUBE - 0.120 in WALL, BENDING SPEED:, 1.2 RPM, MAXIMUM CENTERLINE RADIUS:, 11-7/8 in S:- REPLACES OUTDATED RAM STYLE HYDRAULIC BENDERS, - INDUCTION MOTOR WITH ...more
2" Ercolina #SB48, 1-1/4" diameter, 40 pipe, PLC, 2-Axis positioner, foot pedal, #20861
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Tube and Pipe Benders
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Ercolina
Model: SB48
MODEL: SB48-TC Super Bender, "Ideal for bending pipe, tube, squares, rectangles, solids, and other, profiles", *Bends to 90 degrees in 7 seconds., *Programmable material spring back., *Patented tooling system with multiple radii available., *Remote foot pedal allows hands free operation., *Patented swing away counter ...more
2" Ercolina #SB48 Super Bender, NEW
Smith Machinery Co | Ames, IA
Category: Tube and Pipe Benders
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Ercolina
Model: SB48
Tube (Min.).25 inches Tube (Max.) 2 inches Pipe (Max.) 1.5" - Sch. 40 Centerline Radius (Min.) 2 x Centerline Radius (Max.) 8.875 inches Degree of Bend 0-210 Bending Speed 2 RPM Programming NC with Touchpad (30) programs (9) bends per program Voltage 120V 1ph (3ph available) Dimensions (L x W x H) 22.5" x 16.25" x ...more
2" Ercolina #SB48-PLUS Super Bender, 1.5" - Sch. 40, NEW
Smith Machinery Co | Ames, IA
Category: Tube and Pipe Benders
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Ercolina
Model: SB48-PLUS
Tube (Min.).25 inches Tube (Max.) 2 inches Pipe (Max.) 1.5" - Sch. 40 Centerline Radius (Min.) 2 x Centerline Radius (Max.) 8.875 inches Degree of Bend 0-210 Bending Speed 2 RPM Programming One touch bend angle control with spring back Material Positioning Table yes Voltage 220V 1ph Dimensions (L x W x H) 22.5" x ...more
2" Ercolina #SB48-TC Super bender rotary draw bending machine
SOMINN Machinery Sales | Dodge Center, MN
Category: Tube and Pipe Benders
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Ercolina
Model: SB48-TC
ERCOLINA (NEW) SB48 SUPER BENDER ROTARY DRAW BENDING MACHINE, CAPACITIES BASED ON MILD GRADE MATERIALS, 1/4" TO 2" OUTSIDE DIAMETER, 1-1/2" SCH 40 PIPE CAPACITY, 2D TO 8-7/8" CENTERLINE RADIUS, 0-210 DEGREE BENDS, 2 RPM BENDING SPEED, - NC WITH TOUCHPAD, - 30 PROGRAM, - 9 BENDS PER PROGRAM, 120 ...more
2" Ercolina #TB50, pipe & tube bending machine, 0-180 degree of bend, 1 HP, electric foot pedals, 1995
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ercolina
Model: TB50
Year: 1995
SERIAL. 595147MODEL. TOP 50 BENDERYEAR NEW. 1995DEGREE OF BEND. 0 TO 180 DEGREESBENDING SPPED. 1 OR 2 RPMPIPE SCHUDLE 40. 2" DIAMETERMILD STEEL TUBE. 2-1/2" @.125"SOFT BRASS. 2-1/2" @.140"STAINELESS STEEL. 2-1/2" @.120"ST 35 HYDRAULIC STEEL. 2-1/2" &.095"HARD COPPER & ALUMINUM. 2-1/2" @.187"ROUND SOLIDS. ...more
2" Ercolina #TB60, rotary draw, programmable Control, #18834
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Tube and Pipe Benders
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Ercolina
Model: TB60
(NEW) ERCOLINA ROTARY DRAW BENDER, MODEL: TB60, FACTORY, BENDING CAPACITIES, Tube, Minimum: 1/4", Tube, Maximum: 2-1/2", Pipe, Maximum: 2" Schedule 40, Centerline Radius, Minimum: 2 x Profile Diameter, Centerline Radius, Maximum: 15", Degree Of Bend: 0-210 Degrees, *All capacities based on A53 grade A 48,00 psi ...more
2" Greenlee #795, Horizontal Hydraulic Tube Bender
G-2000 | Toledo, OH
Category: Tube and Pipe Benders
Seller: G-2000
Location: Toledo, OH
Mfr: Greenlee
Model: 795
HYDRAULIC UNIT INCLUDED, STROKE OF CYLINDER: 8", Machine Type.Benders, Hydraulic Manufacturer.GREENLEE Model.N/A Year.N/A Condition.Used.
2" Greenlee #GX855, electric conduit bender, Intellibend controls, portable on wheels
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Greenlee
Model: GX855
SERIAL. AKF06932, MODE. GX855, CAPACITY RIDGE. 3/4" TO 2" RIDGE, CAPACITY EMT. 1 TO 2", BENDIG RADIUS. 7.000" (177.800 MM) - 9.000" (EMT) For 1.000" - 2.000" Shoe Size, INTELLIBEND CONTROLS. YES, PHASE. 1, VOLTAGE. 110, PORTABLE ON WHEELS. YES.
2" Horn #CNC50TBRE, CNC tube bender,M3 CNC Control,double stack tooling, 2006,S43407
Perfection Global | Elk Grove Village, IL
Category: Tube and Pipe Benders
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Horn
Model: CNC50TBRE
Year: 2006
Bending Capacities Round Tube, Mild Steel: 2.00" x0.08"Round Tube, Non-Ferrous 2.00" x0.14"Round Tube, Stainless: 2.00" x0.05"Square Tube, Mild Steel: 1.57" x0.08"Solid Bar, Mild Steel: 0.98"Max. Bending Radius: 1.18" -8.66"Max. Bending Angle: 190°Rolling Capacities Round Tube, Mild Steel: 2.00" ...more
2" Modern #2LD, cut-off, 16' automatic bar feeder, PLC Control, 1995
Presses for Industry | Detroit, MI
Category: Tube and Pipe Benders
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Modern
Model: 2LD
Year: 1995
STANDARD CATALOG, MODERN CUTTING-OFF MACHINE WITH AUTOMATIC 16 ' LONG BAR FEEDER, MODEL 2LD, YEAR 1995, 1/4" - 2-1/8" O.D. CAPACITY, 10 HP, 1800 RPM MAIN DRIVE MOTORS, 16 SPINDLE SPEEDS, FEED & COOLANT PUMP MOTORS 1/2 HP, 1200 RPM, 16' MODERN AUTOMATIC LONG BAR AUTO FEED SYSTEM, OPERATOR PANEL WITH, -- ...more
2" Oster #655, master tube bender
G-2000 | Toledo, OH
Category: Tube and Pipe Benders
Seller: G-2000
Location: Toledo, OH
Mfr: Oster
Model: 655
Machine Type.Benders, Pipe, Tube & Bar Manufacturer.OSTER Model.NO. 655 Year.N/A Condition.Used.
2" Pedrick #A-7, rotary pipe bender, 36" table, 3" spindle diameter, 5 HP
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pedrick
Model: A-7
SERIAL. 9399, MODEL. A7, PIPE CAPACITY, EXTRA HEAVY. 2", TUBE CAPACITY. 2-3/8" OD X.218" WALL, BAR CAPACITY. 1-3/4" OD, TABLE SIZE. 36", BENDING MOVEMENT, INCH POUNDS. 28,500, BENDING RADIUS. 10" @ 2" IPS, DIAMETER OF SPINDLE. 3", MOTOR HORSEPOWER. 5.
