go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Screw Type Injection Molding Machine

warning
51 - 100 of 409 listings

89 Ton, 3.3 oz., Nissei #FNX80III-12A Hybrid, horizontal injection molding machine, 32mm screw, 2014

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FNX80III-12A
Year: 2014
, 2014 89 US Ton Nissei FNX80III-12A Hybrid Injection Molding machine:, Shot size: 3.3 Oz, Screw size: 32 mm, Injection speed: 250 mm/s, Tie bar spacing: 16.5" x 16.5", Platen size: 22.8" x 22.8", Max. Open daylight: 26.4", Clamp stroke: 18.5", Control: Tact, Hours: 36374, Voltage: 240, Yushin Sprue Picker HOPFive ...more

90 Ton, 4.6 oz., Engel, vertical injection molder, rotary table

Bay Area CNC Machinery | Walnut Creek, CA
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Engel
Manufacturer EngelCondition UsedStock Number 47518888121.

90 Ton, 6 oz., Haitian #HTF90W, Injection Molding Machine, 13.8" x 13.8" tie bar spacing, 21.3" x 21.3" platen, 27.5" daylight, 14.9" max. mold height, KEBA control, 2008

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Gilberts, IL
Mfr: Haitian
Model: HTF90W
Year: 2008
Full listing with all photos: meadoworks.com (Meadoworks item #6937), DRIVE TYPE Hydraulic TONNAGE 90 SHOT SIZE OZ. 6 TIE BAR SPACING 13.8" x 13.8" PLATEN SIZE 21.3" x 21.3" DAYLIGHT 27.5" VOLTAGE 460 AMPS 30.5 CONTROL KEBA MIN/MAX MOLD HEIGHT 6" - 14.9" CLAMP TYPE Double Toggle.

90 Ton, 9.6 oz., Milacron #MTS-90, Injection Molding Machine, 15.94" x 14.17" platen, 2015

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Milacron
Model: MTS-90
Year: 2015
Make: Milacron, Model: MTS 90, Year: 2015, Machine Location: North Carolina, 90 Ton, 9.6oz /272 Gram Barrel, 45mm Feed Screw, Tie Bar Spacing 15.94″x 14.17″, Platen Size 24.02″ x 22.24″, Max Daylight 28″, Prior Use: Nylon and Polypropylenes, Hours 9882, Dimensions: 4.5’ wide x ...more

90 Ton, Autojectors #HCR-90, Vertical Clamp Injection Molding Machine, horizontal injection, 12" x 18" platen, Allen Bradley control, 230 V., 1998

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Autojectors
Model: HCR-90
Year: 1998
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #3873), DRIVE TYPE Hydraulic TONNAGE 90 PLATEN SIZE 12" x ...more

Get email updates for newly added Screw Type Injection Molding Machine

Screw Type Injection Molding Machines (also known as screw injection molding presses) are machines that use a rotating screw to inject molten plastic or rubber into molds for precise shaping. Commonly used in industries like automotive, electronics, and packaging, they are ideal for producing high-quality, complex plastic or rubber parts. These machines are essential for efficient, high-speed production and consistent molding of materials.

94 Ton, 6.8 oz., Multitech #C85-SD-GK, vertical injection molding machine, 50mm screw

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Multitech
Model: C85-SD-GK
Year: 2022
Model: C85SD-GK, Us Tonnage: 94, Shot Size Oz: 6.8, Screw Diameter: 50mm, Mold Opening Force: 12 Tons, Clamping Stroke: 10.63", Min Mold Thickness: 7.28", Max Mold Open: 17.91", Max Mold Size: 22.05" x 14.17", Max Mold Weight: 2072 lbs., Platen Slide Size: 45.67" x 14.96", Configuration: Dual Shuttle Table, Ejector ...more

100 Ton, 2.76 oz., Engel #e-victory-170/100US, hybrid horizontal injection molder, 31.5" DL, CC300, 2019

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: E-VICTORY-170/100US
Year: 2019
, 2019 100 Ton Engel e-victory 170/100 US (Hybrid), Shot size: 2.76 oz, Screw size: 30 mm, Tiebarless, Platen size: 25.59" x 23.62", Max. Open daylight: 31.5", Control: CC300, Hours: 250, Moretto Resin Loader/ Feed Throat Dryer, Engel “PIC A” Sprue Picker., Machine is under power. It is a sample machine ...more

100 Ton, 3.2 oz., Engel #ES330/100TL-V, horizontal injection molding machine, CC90 Control, 2002

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: ES330/100TL-V
Year: 2002
, New in 2002, 100 Ton Engel ES 330/100 TL V:, Shot size: 3.2 Oz, Platen Size: 27.95″ x 22.05″, Tie bar less, Max. Open daylight 27.56", CC90 control, Hour meter: 2,057, Machine is in good running conditions. Under power., Imperial Metric Tonnage 100 T 90.719 t Shot Size 3.2 oz 90.7 g Year 2002 2002.

100 Ton, 4.9 oz, Toyo #ET-100VR2, electric injection molder, 100 ton clamp, 36 mm screw, PLCS-11, 2012

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Toyo
Model: ET-100VR2
Year: 2012
Used 100 Ton Toyo Electric Vertical Rotary Injection Molding Machine, Model ET-100VR2, 4.9 Oz, New In 2012 Clamp Force: 100 Ton Screw Diameter: 36 MM Shot Size: 4.9 Oz Min/Max Mold Height: 9.44" x 13.77" Max Mold Size: 22.64" x 17.12" Controller: PLCS-11 S/N: 1576020 Vertical Injection Unit - Currently Removed From ...more

100 Ton, 6.5 oz., Engel #IN-330H/100, vertical clamp, horizontal injection, 13.39" x 23.23" platen, 2004

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: IN-330H/100
Year: 2004
, 2004 100 Ton ENGEL IN 330H/100 US:, Vertical Clamp - Horizontal Injection, Shot size: 6.5 Oz, Screw size: 25 mm, Platen size: 13.39 x 23.23, Hours: 49,603, Table Diameter: 47", Machine is in good running conditions and under power., Imperial Metric Tonnage 100 T 90.719 t Shot Size 6.5 oz 184.3 g Year 2004 2004.

100 Ton, Matsuda Seisakusho #100F-40L, Injection Molder, 25" x 25", 1998

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Matsuda Seisakusho
Model: 100F-40L
Year: 1998
145 CM, 25” X 25”, 100 TON CLAMPING FORCE, (9640#) 46X200X74, (200#) 45X54X18, *CONTAINS 2 PIECES.

100 Ton, Toyo #ET-100VR2, electric injection molder, PLCS-11, 2014

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Toyo
Model: ET-100VR2
Year: 2014
Used 100 Ton Toyo Electric Vertical Rotary Injection Molding Machine, Model ET-100VR2, 4.9 Oz, New In 2014 Clamp Force: 100 Ton Screw Diameter: 36MM Shot Size: 4.9 Oz Min/Max Mold Height: 9.44" x 13.77" Max Mold Size: 22.64" x 17.12" Controller: PLCS-11 S/N: 1576025 Vertical Injection Unit - Currently Removed From ...more

101 Ton, 1.16 oz., Haitian Zhafir #VEIII-900/1200h All Electric injection molding machne, 22mm screw, 2023

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: VEIII-900/1200H
Year: 2023
The Haitian Zhafir VEIII 900/120h is a used 2023 all-electric injection molding machine, offering 101 U.S. tons of clamping force. Featuring a shot size of 1.16 oz., it is a 22mm screw diameter, making it suitable for producing small to medium-sized parts. The machine is designed for efficiency and precision, with a ...more

101 Ton, 1.34 oz., Wittmann Battenfeld #EcoPower-90/130, Electric Injection Molder, 18.5" x 16.54" tie bar spacing, 14.96" clamp stroke, 36.61" dl, UNILOG B8 control, 2022

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: South Elgin, IL
Mfr: Wittmann Battenfeld
Model: ECOPOWER-90/130
Year: 2022
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #6054), DRIVE TYPE Electric TONNAGE 101 SHOT SIZE OZ. 1.34 TIE BAR ...more

101 Ton, 2.15 oz., Haitian #ZEV900/160, injection molding machine, 1.10" screw diameter, Keba Control, new, 2024

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: ZEV900/160
Year: 2024
The Haitian ZEV 900/160 is a new injection molding machine designed for efficiency and precision in plastic production. With a clamping force of 101 tons, this machine is suitable for medium-scale manufacturing processes requiring durable and high-quality output. The machine s a shot size of 2.15 ounces and a screw ...more

101 Ton, 3.73 oz., Niigata #MZ-900/300, injection molding machine, 1.02" screw diameter, new, 2024

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Niigata
Model: MZ-900/300
Year: 2024
The Niigata MZ 900/300 is a new injection molding machine designed for robust performance and precision. With a clamping force of 101 tons, it provides a shot size of 3.73 ounces, suitable for producing smaller plastic components. Its screw diameter measures 1.02 inches, allowing for efficient material processing. ...more

101 Ton, 4.86 oz., Haitian #MAV900/280, injection molding machine, 1.42" screw diameter, Keba Control, new, 2024

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: MAV900/280
Year: 2024
The Haitian MAV 900/280 Injection Molding Machine is a new, robust solution for your plastic manufacturing needs. With a clamping force of 101 tons, this machine is designed for efficiency and reliability in producing high-quality plastic components. Featuring a 4.86 oz shot size, a 36mm (1.42") screw diameter, and a ...more

110 Ton, 3.3 oz., Nissei #TD110E-9E, injection molding machine, 25.4" x 16.1" platens, NC9300T Control, 2003

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: TD110E-9E
Year: 2003
Used Nissei TD110E-9E (2003) Injection Molding Machine for Sale. This 110 ton machine has a 3.3 oz shot size and a platen size of 25.4″ x 16.1″, with 17.72″ maximum daylight and a minimum/maximum mold height of 11.84″/27.56″. It runs an NC9300T control and requires 230 volt power. The ...more

110 Ton, 3.4 oz., Toyo #Si-110II, injection molding machine, 16.14" x 16.14" tie bars, PLCS-10 Control, 2003

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Toyo
Model: SI-110II
Year: 2003
Used Toyo Si-110II (2003) Injection Molding Machine for Sale. This all-electric press is rated at 110 Ton clamp force with a 3.4 oz shot size, tie bar spacing of 16.14″ x 16.14″, and platen size of 22.83″ x 22.83″. Minimum and maximum mold height is 5.91″ and 20.08″, with a ...more

110 Ton, 3.59 oz., Niigata #MDVP110X, vertical injection molding machine, 18.11" x 18.11" max mold, 2008

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Niigata
Model: MDVP110X
Year: 2008
Used Niigata MDVP110X (2008) Injection Molding Machine for Sale. This all-electric press is rated at 110 Ton clamping capacity with a 3.59 oz shot size. Minimum and maximum mold height is 11.81″ to 15.74″, with 26.77″ maximum daylight and a maximum mold size of 18.11″ x 18.11″. The ...more

110 Ton, Niigata #MDVP110X, Vertical Molding Machine, 40mm Screw, 3.59 oz, 52.75" table diameter, 2008

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Niigata
Model: MDVR110X
Year: 2008
Used 110 Ton Niigata MDVR110X Vertical Molding Machine Vertical/Vertical Configuration Shot Size: 3.59 OZ Screw Diameter: 40MM Table Diameter: 52.75" 1340MM Clamp Stroke: 11.03" 280MM Min/Max Mold Height: 11.81" / 15.74" 300MM/400MM Max Daylight: 26.77" 680MM Max. Mold Size: 18.11" x 18.11" 460MM/460MM S/N 11109R New ...more

110 Ton, 4.8 oz., JSW #J100ADS-110U, Electric Injection Molding Machine, 35.8" dl, 21.65" max. mold height, 18.11" x 18.11" tie bar spacing, Syscom 5000 control, 342 hours, 2020

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Jsw
Model: J100ADS-110U
Year: 2020
Used JSW J100ADS-110U (2020) Injection Molding Machine for Sale. This all-electric press is rated at 110 ton clamping force with a 4.8 oz shot size. Platen size is 24.41″ x 24.41″ with tie bar spacing of 18.11″ x 18.11″. Maximum daylight is 35.83″, minimum and maximum mold height is ...more

110 Ton, 4.8 oz., Sumitomo #SE100DUZ-C250M, horizontal plastic injection molder, 29.92" daylight, 18.11" x 16.14" tie bar spacing, 2012

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Sumitomo
Model: SE100DUZ-C250M
Year: 2012
, 2012 110 Ton Sumitomo SE100DUZ-C250M, All Electric Injection Molding machine, Shot size: 4.8 Oz, Screw diameter: 36 mm, Tie bar spacing: 18.11" x 16.14", Platen size: 25.59" x 23.62", Max. Open daylight: 29.92", Machine in good running conditions. Under power., Comes with Picker., Imperial Metric Tonnage 110 T 99.79 ...more

110 Ton, 4.8 oz., Sumitomo #SE100DUZ-C250M, horizontal plastic injection molder, 29.92" daylight, 18.11" x 16.14" tie bar spacing, 2010

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Sumitomo
Model: SE100DUZ-C250M
Year: 2010
, 2010 110 Ton Sumitomo SE100DUZ-C250M, All Electric Injection Molding machine, Shot size: 4.8 Oz, Screw diameter: 36 mm, Tie bar spacing: 18.11" x 16.14", Platen size: 25.59" x 23.62", Max. Open daylight: 29.92", Machine in good running conditions. Under power., Comes with Picker., Imperial Metric Tonnage 110 T 99.79 ...more

110 Ton, 5 oz., Krauss Maffei #KM110-390-C2, inkection molding machine, 35mm screw, 1998

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Krauss Maffei
Model: KM110-390-C2
Year: 1998
Used 110 Ton Krauss Maffei 5 Ounce Shot Injection Molding Machine, Manufacturer: Krauss Maffei, Model KM110-390-C2, Serial #114468, Year: 1998, Has toggle clamp, 18.5" x 18.5" tie bar spacing, Plastens Size: 32" wide x 33" wide, Has 35mm screw with 23/1 L/D barrel, Reported lab use only, Motor: 460V/3Ph/60Hz, 1998 ...more

110 Ton, 5.2 oz., Engel #E-Motion-310/110T-US, horizontal injection molding machine, 198" x 68" x 84" overall, 2011

Toolquip Inc | Lebanon, OH
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Engel
Model: E-MOTION 310/110T US
Year: 2011
Used ENGEL E-MOTION 310/110T US, 2011 model, offers 310-ton capacity and 5.2 oz shot size for horizontal injection molding., 2011 ENGEL E-MOTION 310/110T US, Tonnage. 110 T, Shot Size. 5.2 oz, Horz/Vert. Horz, Dimensions. 198" × 68" × 84", Weight. 21,000.

110 Ton, 5.6 oz., JSW #J110EII, horizontal plastic injection molder, 29.53" daylight, 16.14" x 16.14" tie bar spacing, 2000

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Jsw
Model: J110EII
Year: 2000
, 2000 110 Ton JSW J110EII, Shot size: 5.6 Oz, Screw diameter: 40 mm, Tie bar spacing: 16.14" x 16.14", Platen size: 24.02" x 24.02", Max Open daylight: 29.53", Imperial Metric Tonnage 110 T 99.79 t Shot Size 5.6 oz 158.8 g Year 2000 2000.

110 Ton, 6.3 oz., Niigata #MD110SIII, injection molding machine, 45mm screw, 2002

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Niigata
Model: MD110SIII
Year: 2002
Voltage: 220, US Tonnage: 110, Model: MD110SIII, Screw Diameter: 45 mm, Shot Size (oz): 6.3.

110 Ton, 8.1 Oz, Toshiba Shibaura #EC110SXIIIV70-U34, Electric Injection Molding Machine, 35.4" daylight, 26" x 24" platen, Dual Air Blow, InjectVisor V70 Control, Robot Interface, 2023

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Shibaura
Model: EC110SXIIIV70-U34
Year: 2023
Make: Toshiba Shibaura, Model: EC110SXIIIV70-U34, Year: 2023, Machine Location: Upon Request, Capacity: 110 Ton, Shot Size: 8.1 oz, Tie Bar Spacing: 18.1″ x 16.1″, Platen Size: 26″ x 24″, Max Daylight: 35.4″, Min /Max Mold Height: 7.71″/21.7″, Clamp Stroke: 13.8″ ...more

112 Ton, 4.83 oz., JSW #J100ADS, All-Electric Injection Molding Machine, 18.11" x 18.11" tie bar spacing, 35.83" daylight, 1.57" screw, 2020

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Valley Stream, NY
Mfr: Jsw
Model: J100ADS
Year: 2020
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #6269), DRIVE TYPE Electric TONNAGE 112 SHOT SIZE OZ. 4.83 TIE BAR ...more

120 Ton, 1.5 oz., Nissei #NEX110III-9EG, all-electric injection molding machine, 16.5" x 16.5" tie bar spacing, 29.9" daylight, 2014

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
used- nissei injection molding machine, model nex110iii-9eg. this all-electric press is rated at 120 ton clamping capacity with a 1.5 oz shot size, making it suited to small and medium precision work. tie bar spacing is 16.5" x 16.5" with platens measuring 23.9" x 23.9", a maximum daylight of 29.9" and a clamp stroke ...more

120 Ton, 1.5 oz., Nissei #NEX110III-9EG, injection molding machine, 16.5" tie bars, 23.9" platen, 13.8" clamp stroke, Tact IV, 2014

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
Used Nissei NEX110III-9EG (2014) Injection Molding Machine for Sale. This all-electric press is rated at 120 Ton clamping capacity with a 1.5 oz shot size, making it suited to small and medium precision work. Tie bar spacing is 16.5″ x 16.5″ with platens measuring 23.9″ x 23.9″, a maximum ...more

120 Ton, 2 oz., Engel #e-victory-EVC-170/120US, horizontal plastic injection molder, 27.55" daylight, 2015

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: E-VICTORY-EVC-170/120US
Year: 2015
, 2015 120 Ton Engel e-victory EVC 170/120 US:, Shot size: 1.99 oz, Screw diameter: 25 mm, Note: Also a 18 mm screw comes with it., Tiebarless, Platen size: 29.13" x 26.77", Max. Open daylight: 27.55", Hours: 1,100., Machine is in excellent shape. Under power., Imperial Metric Tonnage 120 T 108.862 t Shot Size 2 oz ...more

120 Ton, 2 oz., Nissei #NEX110III-9EG, all-electric injection molding machine, 16.5" x 16.5" tie bar spacing, robot interface, 2014

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
used- nissei injection molding machine, model nex110iii-9eg. this all-electric press is rated at 120 ton clamp force with a 2 oz shot size. tie bar spacing measures 16.5" x 16.5", platen size is 23.9" x 23.9", and maximum daylight is 29.9". the machine runs a tact control and is air blow and a robot interface. built ...more

120 Ton, 2 oz., Nissei #NEX110III-9EG, injection molding machine, 16.5" tie bars, 23.9" platen, 29.9" daylight, Tact control, 2014

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
Used Nissei NEX110III-9EG (2014) Injection Molding Machine for Sale. This all-electric press is rated at 120 Ton clamp force with a 2 oz shot size. Tie bar spacing measures 16.5″ x 16.5″, platen size is 23.9″ x 23.9″, and maximum daylight is 29.9″. The machine runs a Tact control and is ...more

120 Ton, 2.7 oz., Arburg #Allrounder-470S-1100-170, Injection Molding Machine, 18.5" x 18.5" tie bar, 25" x 25" platen, 33.4" dl, 19.6" max. mold height, Selogica control, 2012

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: ALLROUNDER 470S 1100-170
Year: 2012
Used Arburg Allrounder 470S 1100-170 (2012) Injection Molding Machine for Sale. This machine offers 120 ton clamping capacity with a 2.7 oz shot size and runs on a Selogica control at 460V. Platen size is 25″ x 25″ with 18.5″ x 18.5″ tie bar spacing, 33.4″ maximum daylight, and a ...more

120 Ton, 6.19 oz., Battenfeld #HM110/525, injection molding machine, 18.5" x 15.53" tie bars, Unilog B6 Control, 2013

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Battenfeld
Model: HM110/525
Year: 2013
Used Battenfeld HM110/525 (2013) Injection Molding Machine for Sale. This machine has a 120 ton clamping capacity and a 6.19 shot size, with tie bar spacing of 18.50″ x 15.53″ and a maximum daylight of 30.51″. Minimum and maximum mold height is listed at 10.83″. Machine control is Unilog B6. ...more

120 Ton, 8 oz., Van Dorn #120-HT-8F, horizontal injection molding machine, 17" x17" tie bar spacing, 19" DL, 20 HP, Pathfinder 2500 Control, 1994

Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 120-HT-8F
Year: 1994
1994 Used 120 Ton Van Dorn 120-HT-8F Injection Molding Machine available. s include a 120-ton capacity, 8 oz shot size, and Pathfinder 2500 controls. Platen area is 25"x24" with a 19" daylight opening., Capacity: 120 Ton, Shot Size: 8 oz., Platen Area: 25"x24", Tie Bar Spacing: 17"x17", Daylight Opening: 19" ...more

123 Ton, 6.1 oz., Nissei #FNX110IIIA-18A, hybrid horizontal injection molder, 18.1" x 18.1" tie bar spacing, 28.3" daylight, Tact IV, 2014

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FNX110IIIA-18A
Year: 2014
, 2014 123 Ton Nissei FNX110IIIA-18A (Hybrid), Shot size: 6.1 oz, Screw size: 40 mm, Tie bar spacing: 18.1" x 18.1", Platen size: 25.5" x 25.5", Max. Open daylight: 28.3", Control: Tact IV, Machine is in good running conditions and under power., Imperial Metric Tonnage 123 T 111.584 t Shot Size 6.1 oz 172.9 g Year ...more

125 Ton, 5 oz., Engel #ES-330H/125VRB, vertical clamp, horizontal injection, rotary table, 2000

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: ES-330H/125VRB
Year: 2000
, 2000 125 Ton ENGEL ES 330H/125VRB, Vertical Clamp - Horizontal Injection - Rotary Table, Shot size: 5 Oz, Screw Diameter: 35 mm, Platen Size: 17.7" x 31.9", Table Diameter: 46.5", Hours: 4,346, Machine is in good running conditions. Under power., Imperial Metric Tonnage 125 T 113.398 t Shot Size 5 oz 141.7 g Year ...more

2012

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Cincinnati Milacron
Model: MTS-125
Year: 2012
Used Cincinnati Milacron MTS-125 (2012) Injection Molding Machine for Sale. This machine offers 125 ton clamp capacity with a 5.8 oz shot size, making it suited to small and mid-size tooling work. Platen size is 25.7″ x 25.7″ with tie bar spacing of 17.1″ x 17.1″, and maximum daylight measures ...more

125 Ton, 7.6 Oz, Cincinnati Milacron Magnat #MTS-125, Injection Molding Machine, Fr.450, Endura Touch Controller, 10,000 hours, 2014

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cincinnati
Model: MTS-125
Year: 2014
Make: Cincinnati Milacron, Model: MTs 125, Year: 2014, Machine Location: Idaho, Clamping Capacity: 125 Ton, Shot Size: 7.6 Oz, Controller: Endura Touch Controller, Frame Size: 450 Frame, Hours: ~10,000, Core Pull, Air Blast, *Spec Sheet Available*.

130 Ton, 10.5 oz., Tederic #D130/510 I510 Injection Molding Machine, 2017

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Tedric
Model: D130/510
Year: 2017
Make: Tedric, Model: D130/510, Year: 2017, Machine Location: Upon Request, -Clamping Force: 130 Tons, -Oz Shot Capacity: 10.48 Oz, -Screw Size: 45mm, -Dimensions: 177.17″ x 50.39″ x 72.05″.

135 Ton, 1.83 & 0.67 oz., Haitian Zhafir #ZEIII-1200M-160h/V80h Multi shot injection molding machine, 2020

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: ZEIII-1200M-160H/V80H
Year: 2020
Voltage: 460V/3P/60Hz, US Tonnage: 135, Model: ZEIII 1200M-160h/V80h Multi A/A Screw, Screw Diameter: 26mm / 19mm.

135 Ton, 3.21 oz., Haitian #ZEV-1200/210, injection molding machine, 1.26" screw diameter, new, 2024

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: ZEV-1200/210
Year: 2024
The Haitian ZEV 1200/210 is a brand-new injection molding machine, designed for robust performance with a clamping force of 135 tons. This machine is equipped to handle a shot size of 3.21 ounces of PS. It s a screw diameter of 1.26 inches and offers a platen size of 25.2 inches by 25.2 inches, which is fitting for ...more

135 Ton, 3.21 oz., Haitian #ZEV-1200/210, injection molding machine, 32mm screw diameter, new, 2024

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: ZEV-1200/210
Year: 2024
The Haitian ZEV 1200/210 is a new horizontal injection molding machine with a clamping force of 135 tons, ideal for various plastic manufacturing applications. This machine s a shot size of 3.21 ounces of PS and is a 32mm screw diameter, catering to different molding requirements. Its platen size measures 25.2 x 25.2 ...more

135 Ton, 4.73 oz., Haitian #VEIII-1200/300, injection molding machine, 36mm screw, new, 2023

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: VEIII-1200/300
Year: 2023
Model: VE1200III/300 B-Screw, Us Tonnage: 135, Shot Size Oz Of Ps: 4.73, Screw Diameter: 36mm, Platen Size In: 27.17 x 27.17, Tiebar Spacing Hxv In: 18.5 x 18.5, Max Mold Height In: 19, Min Mold Height In: 6, Opening Stroke In: 14, Open Daylight In: 33, Ejector Stroke In: 4, Control: KEBA, Voltage: 460V/3P/60Hz.

135 Ton, 4.73 oz., Niigata #MZ-1200/300, injection molding machine, 1.42" screw diameter, 18.5" x 18.5" tie bar spacing, new, 2025

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Niigata
Model: MZ-1200/300
Year: 2025
The Niigata MZ 1200/300 Injection Molding Machine is a robust and reliable choice for heavy-duty plastic manufacturing processes. With a clamping force of 135 tons and a shot size of 4.73 ounces of PS, this machine efficiently handles demanding production needs. The screw diameter is 1.42 inches, ensuring precision in ...more

135 Ton, 5.85 oz., Niigata #MZ-1200/300, injection molding machine, 1.57" screw diameter, new, 2025

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Niigata
Model: MZ-1200/300
Year: 2025
The Niigata MZ 1200/300 Injection Molding Machine is a robust and efficient solution for your plastic manufacturing needs. This new unit boasts a clamping force of 135 tons, ensuring precision and consistency in the molding process. It s a shot size of 5.85 ounces, catering to a variety of production requirements with ...more

135 Ton, 6.83 oz., Haitian #ZEV1200/430, injection molding machine, 1.26" screw diameter, Keba Control, new, 2024

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: ZEV1200/430
Year: 2024
The Haitian ZEV 1200/430 is a new injection molding machine designed for precision and efficiency in plastic manufacturing. With a clamping force of 135 tons and a shot size of 6.83 ounces, this machine is well-suited for a variety of medium-scale production needs. It s a 32mm (1.26") screw diameter and offers a ...more